PDCR 300
For harsh test applications
This product has been specifically designed and tested to meet the
harsh requirements found within many Aerospace applications, whilst
also satisfying many industrial requirements. The product is founded
on the highly reliable silicon chip produced within Druck’s own 21st
Century clean room. The Piezoresistive technology has been developed
and enhanced for more than 45 years, which is widely used within the
Aerospace/Industrial and Oil & Gas markets. This compact analogue
sensor provides unrivalled performance across a wide Pressure and
Temperature range, which lends itself very well for a variety of uses
across high pressure requirements within hydraulic systems to low
pressure, barometric measurement. No micro-processors are adopted
within this product, which enables reliability at high temperatures to
be achieved. The conditioned millivolt output is distributed through a
4-wire configuration.
Construction Target applications
• All Stainless Steel 316L, 17/4PH & INC 625 Aerospace Test and General Industrial
• 24 AWG PTFE Insulated cable
Pressure ranges
Performance Zero based ranges:
• NLH&R (see table 1)
1
• Lowest Full Scale Range 110 kPa (1.1 bar)
•T
otal Accuracy ± 3% Full Scale (across
2
• Highest Full Scale Range 35 MPa (350 bar)
wide temp. range -55˚C to +150˚C)
See table 1 for complete offering.
Mechanical properties Electrical properties
• Pressure connection M5x0.8-6g • Power Supply: 2.5 to 15 Vdc (output ratiometric to supply)
• Proof Pressure 1.5 x Full Scale • Input impedance: >2000 Ohms
• Containment Pressure 2.0 x Full Scale • Output Impedance: 5000 Ohms (nominal)
• Media compatibility: • Insulation resistance >100 MOhms @ 500 Vdc
– Ranges <=2MPa or =7MPa: Fluid compatible with SS17-4PH
and SS316L
– Ranges >2MPa to <7MPa: Fluid compatible with SS17-4PH,
SS316L and Inconel 625
• Mounting Torque: 4 Nm maximum
1
The effects of Non-linearity, Hysteresis and Repeatability.
2
Accuracy includes the combined effects of Non-Linearity, Hysteresis, Repeatability (NLH&R) and zero &
span over the calibrated range.
Table 1. Pressure ranges
Part number Pressure range NLH&R Output
(at room temperature)
300T111M0033-1 0 to 35 MPa Absolute ±0.3% FS BSL 0 to 120 mV
300S111M0033-1 0 to 28 MPa Absolute ±0.2% FS BSL 0 to 120 mV
300R111M0033-1 0 to 21 MPa Absolute ±0.2% FS BSL 0 to 120 mV
300P111M0033-1 0 to 14 MPa Absolute ±0.2% FS BSL 0 to 120 mV
300N111M0033-1 0 to 10 MPa Absolute ±0.2% FS BSL 0 to 120 mV
300M111M0033-1 0 to 7 MPa Absolute ±0.2% FS BSL 0 to 120 mV
300L111M0033-1 0 to 4 MPa Absolute ±0.2% FS BSL 0 to 120 mV
300K111M0033-1 0 to 2 MPa Absolute ±0.2% FS BSL 0 to 120 mV
300J111M0033-1 0 to 1.7 MPa Absolute ±0.2% FS BSL 0 to 120 mV
300H111M0033-1 0 to 1.4 MPa Absolute ±0.2% FS BSL 0 to 120 mV
300G111M0033-1 0 to 1 MPa Absolute ±0.2% FS BSL 0 to 120 mV
300F111M0033-1 0 to 700 kPa Absolute ±0.2% FS BSL 0 to 120 mV
300E111M0033-1 0 to 500 kPa Absolute ±0.2% FS BSL 0 to 120 mV
300D111M0033-1 0 to 350 kPa Absolute ±0.2% FS BSL 0 to 120 mV
300C111M0033-1 0 to 230 kPa Absolute ±0.2% FS BSL 0 to 120 mV
300B111M0033-1 0 to 200 kPa Absolute ±0.2% FS BSL 0 to 120 mV
300A111M0033-1 0 to 110 kPa Absolute ±0.2% FS BSL 0 to 60 mV
Physical properties
29.36 Max
21.2
20.2 ø 14.5
8 3 (1100) (20) 12.95
A/F
12.85
All dimensions in mm
Wiring details Laser marking details (example)
Electrical connections
Color Function
Red Supply Positive (EXC +)
Blue Supply Negative (EXC -)
Yellow Output Positive (Output +)
Green Output Negative (Output -)
Screen Not Connected
Notes:
• For supply of this product outside of China, the TRS requirements will need to be considered on a case by case basis.
• Standard Lead-time is 8 weeks from order for popular ranges.
• Minimum Order Quantities any type (defined by pressure range) is 2 pieces.
• Other ranges may be available upon request – subject to review and approval.
Copyright 2021 Baker Hughes Company. All rights reserved.
BHCS39123 (09/2021) druck.com
