Scribd
Upload
44 views2 pages

Steering and Dumping Valve, Tightening Torques

This document provides tightening torque specifications for bolts on a steering and dumping valve for a Volvo A40G model. It lists each component of the valve and the recommended torque in Nm and lbf ft to securely fasten the component. Torques range from 5 to 140 Nm. The notice indicates that any bolted joints not listed should follow the standard Volvo tightening torques.

Uploaded by

alikuncoro1005
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
44 views2 pages

Steering and Dumping Valve, Tightening Torques

This document provides tightening torque specifications for bolts on a steering and dumping valve for a Volvo A40G model. It lists each component of the valve and the recommended torque in Nm and lbf ft to securely fasten the component. Torques range from 5 to 140 Nm. The notice indicates that any bolted joints not listed should follow the standard Volvo tightening torques.

Uploaded by

alikuncoro1005
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Service Information

Document Title: Function Group: Information Type: Date:


Steering and dumping valve, 912 Service Information 27/03/2021
tightening torques
Profile:
A40G Volvo

Steering and dumping valve, tightening torques


Showing Selected Profile

Valid for serial numbers


Model Production site Serial number start Serial number stop
A40G Volvo

NOTICE
Regarding bolted joints which are not listed here, see “Volvo standard tightening torques”

Steering and dumping valve

Nm lbf ft
BV1 Non-return valve 140 103.3
BV2 Non-return valve 140 103.3
BV3 Non-return valve 140 103.3
BV4 Non-return valve 100 73.8
BV5 Non-return valve, anti-cavitation (refilling) minus side in float position 140 103.3
CHV1 Shock valve port A 60 44.3
CHV2 Shock valve port B 60 44.3
CHV3 Pressure limiting port B1- 60 44.3
VV1 Cross-over valve 30 22.1
VV2 Cross-over valve 30 22.1
A–Y Restriction 60 44
A–Y Restriction 60 44
MTRV1 Back-pressure valve 60 44.3
MTRV2 Back-pressure valve 30 22.1
BVLS3 Non-return valve load signal 30 22.1
BVLS4 Non-return valve load signal 30 22.1
BVLS5 Non-return valve, load signal 30 22.1
R35 Servo pressure to dump lever 60 44.3
Load signal block 30 22
Load signal block: BVLS1 Non-return valve load signal 30 22.1
Load signal block: BVLS2 Non-return valve load signal 30 22.1
Steer slide 85 62.7
Casing, steering slide 10 7.4
Load signal block: LD restriction 5 3.5
Load signal block: LD plug 30 22.1
Dump slide 10 7.4
Casing, dumping slide 10 7.4

You might also like