Lab A - 02 - 2022
Lab A - 02 - 2022
Objectives
• To get familiarity with the operation of the basic logic gates and verify the truth tables experimentally.
Tasks
1. Perform the study of the truth table of the following logic gates and verify the truth table of the gates
experimentally.
(Note: For the inputs, 1 should be connected to +5V and 0 should be connected to ground. Outputs can be viewed using
LEDs connected through resistors. If the LED is glowing, it will be considered as 1 and if it is not glowing, it will be
considered as 0)
2. (i) Prove that NOR gate is equivalent to a negative AND gate by constructing a simple circuit using NOT and AND
gates and verify the truth table experimentally.
(ii) Prove that NAND gate is equivalent to a negative OR gate by constructing a simple circuit using NOT and OR gates
and verify the truth table experimentally.
3. Perform NOR operation on decimal inputs 10, 13, and 7. Convert the decimal input to the 4 bits binary form before
performing the operations. Draw the timing diagram for the output in relation to the three inputs of the above gates.
4. Perform NAND operation on decimal inputs 6, 9, and 11. Convert the decimal input to the 4 bits binary form before
performing the operations. Draw the timing diagram for the output in relation to the three inputs of the above gates.
5. Based on the input and output sequences given below, identify the corresponding logic operation performed on the
inputs. Draw the timing diagrams of the output in relation to the inputs.
Report Format :
Circuit Construction:
• Submit the constructed circuit via CircuitVerse, and label it according to question. Be self-explanatory.
Assessment:
Total marks = 20/10=2%
Construction/Connections of the Circuit and Result during lab session= 4 (Q1) + (Q2) = 10 marks,
Report =5 Questions × 2 marks = 10 marks