ME0102E080213

MAIN PRODUCTS
Timer/Counter - DIGITAL : Temperature Controller, Counter, Timer,Speedmeter,

GF4
Tachometer, Panel Meter, Recorder

Timer/Counter - SENSOR : Proximity Switch/Photo Electric Sensor,

Rotary Encoder, Optical Fiber Sensor,
Pressure Sensor
INSTRUCTION MANUAL - ANALOG : Timer, Temperature Controller
We appreciate you for purchasing HanYoung NUX Co.,Ltd
product. Before using the product you have purchased, HEAD OFFICE
check to make sure that it is exactly what you ordered. Then, 1381-3, Juan-Dong, Nam-Gu Incheon, Korea
please use it following the instructions below. TEL: (82-32)876-4697 FAX : (82-32)876-4696

Safety information Model and Suffix code

Before you use, read safety precautions carefully, and use this product properly. The
precautions described in this manual contains important contents related with safety; MODEL Suffix code Description
therefore, please follow the instructions accordingly. The precautions are composed GF4 Timer/Counter
of DANGER, WARNING and CAUTION. P Preset
T Total
DANGER Digit 4 4 Digits
Do not touch or contact the input/output terminals because they may cause electric 1 1 Stage
shock.
Stage
0 Indicator
N Terminal Block
Connection
WARNING S Socket 8 Pin
1. If there is a possibility of an accident caused by errors or malfunctions of this
product, install external protection circuit to prevent the accident.
2. This product does not contain an electric switch or fuse, so the user needs to install
a separate electric switch or fuse externally. (Fuse rating : 250V 0.5A) Specification
3. To prevent defection or malfunction of this product, supply proper power voltage in
accordance with the rating.
4. To prevent electric shock or devise malfunction of this product, do not supply the 0.01 % 0.05 % second Max.
power until the wiring is completed. In Repeat accuracy (Power supply start)
5. Since this product is not designed with explosion-protective structure, do not use it Timer Variation due to 0.005 % 0.003 % second Max.
at any place with flammable or explosive gas. func voltage change (Reset start)
6. Do not decompose, modify, revise or repair this product. This may cause
tion Variation due to
malfunction, electric shock or fire.
Ratio to set value
7. Reassemble this product while the power is off. Otherwise, it may cause temperature change
malfunction or electric shock.
100 Min. (at 500 V d.c)
8. It you use the product with methods other than specified by the manufacturer, there
may be bodily injuries or property damages. (between current-carrying terminal and exposed
Insulation resistance
9. Due to the danger of electric shock, use this product installed onto a panel while an noncurrent-carrying metal parts, between power
electric current is applied. supply circuit and control output circuit)
2,000 V a.c 50/60 Hz for 1 minute(between
CAUTION current carrying terminal and exposed
Dielectric strength
1. The contents of this manual may be changed without prior notification. noncurrent-carrying metal parts. between power
2. Before using the product you have purchased, check to make sure that it is exactly supply circuit and control output circuit)
what you ordered.
Square wave noise by simulator
3. Check to make sure that there is no damage or abnormality of the product during
delivery. Noise immunity AC : 2 k V (between power supply terminal
4. Do not use this product at any place with corrosive(especially noxious gas or board) 500 V (between input terminal)
ammonia) or flammable gas. Mechanical durability : 10 to 55 Hz : 0.75 mm
5. Do not use this product at any place with direct vibration or impact.
double amplitude
6. Do not use this product at any place with liquid, oil, medical substances, dust, salt Vibration
or iron contents. (Pollution level 1 or 2) Malfunction durability : 10 to 55 Hz : 0.5 mm
7. Do not polish this product with substances such as alcohol or benzene. double amplitude
8. Do not use this product at any place with excessive induction trouble, static Mechanical durability : 300 (approx. 30 G)
electricity or magnetic noise. Shock
Malfunction durability : 100 (approx. 10 G)
9. Do not use this product at any place with possible thermal accumulation due to
direct sunlight or heat radiation. Mechanical : 10,000,000 operations Min..
Life expectancy
10. Install this product at place under 2,000m in altitude. Electrical : 100,000 operations Min. (250 V a.c 3 A)
11. When the product gets wet, the inspection is essential because there is danger of GF4 - P 184 gms, GF4 - T: 168 gms (with adaptor)
an electric leakage or fire. Weight
GF4 - P41S : 100 gms
12. If there is excessive noise from the power supply, using insulating transformer and
noise filter is recommended. The noise filter must be attached to a panel
grounded, and the wire between the filter output side and power supply terminal
must be as short as possible.
13. If gauge cables are arranged too closely, the effect on noise may occur.
14. Do not connect anything to the unused terminals.
Ratings
15. After checking polarity of terminal, connect wires at the correct position.
16. When this product is connected to a panel, use a circuit breaker or switch Power Supply 100 - 240 V a.c 50 - 60 Hz
approved with IEC847-1 or IEC947-3. Power Consumption GF4-T : 4.8 V A, GF4-P : 6.2 V A (240 V a.c 60 Hz)
17. Install the circuit breaker or switch at near place for convenient use. Reset by power OFF :
18. Write down on a label that the operation of circuit breaker or switch disconnects
the power since the devise is installed.
Min. power OFF time : 0.5 s
Reset / Inhibit
19. For the continuous and safe use of this product, the periodical maintenance is External reset or inhibit :
recommended. Min. reset input signal width : 0.02 s
20. Some parts of this product have limited life span, and others are changed by their SPDT : 250 V a.c 3 A cos = 1 (resistive load)
usage. Control output
21. The warranty period for this product including parts is one year if this product is
Open collector : 30 V d.c Max. 100 mA Max.
properly used. Ambient temperature Operating : -10 to 55
22. When the power is on, the preparation period of contact output is required. In case Humidity 35 to 85 % R.H.
of use for signals of external interlock circuit, use with a delay relay.
 94.7

Dimension & Panel Cutout 81.0

GF4-T40N
Output operation When output happens in output
9.2
(Unit : mm) display LED line, IN is flickered.
GF4-P41N / GF4-T40N Counter : Display accumulater
Number/Time setting figures value.
Timer : Display process time.
T
Use when you initialize accumlated

48.0

44.5
Reset Key figures value &time process value.
Use when you change the opertion
option of Counter / Timer.

Functoin
GF4-P40S
60 이상
94.7
Input logic setting
81.0
9.2 94.7 1. Please Cut the power of GF4 off
81.0
2.Please set the switch for controlling Voltage(PNP)/NON- Voltang(NPN) input
45

9.2

attached on the side of case to fit with the exteriorinput

60 이상

45 3.If you supply the power of GF4 after setting end, Counter/Timeareoperated
48.0

44.5
according to the input sitation of Voltage(PNP)NON-Voltage(NPN) set.
48.0

44.5
Caution) when you change the input setting of Voltage(PNP)NON-
Voltage(NPN), please chage after power isolation

60 이상

Connection
45

GF4-P41S
60 이상

45
PNP
12 V d.c 100
CP(INH)

RESET NO

60 이상
PNP input setting NPN input setting
0V COM
NPN
45

60 이상
POWER
60 이상

45

Decinal Point Selection

45

GF4-P41N
60 이상

45 GF4-T40N
SW2 Display
44.5

NO.2

One Short Time Setting

Features
Setting of one short time by TM
Operates all functions by switches at front (0.1 ms ~ 12.5 s variable)
(Multi-range input/Free scale)
Counting speed 5 kcps selectable
ON-DELAY/OFF-DELAY selectable
Position of a decimal point is movable (in counter)
Wide ranges of power supply (100 - 240 V a.c) Maximum Counting Speed
Semi-permanent backup power for memory protection
Rating of maximum counting speed(MCS) is response speed in case
14 input / 16 output mode
of input for 1:1 duty ratio.
Relay output and transistor output
Though input signal is in the MCS, if ON/OFF time is lower than the
rating of minimum input signal width, counting is not operated.
Name & Description Please use a reliable contact in case of contact input

GF4-P41N / GF4-P41S SW2 MCS Minmum Signal Time

Output operation When output happens in output
display LED line, OUT is flickered.
Counter : Display accumulater 5 kcps 0.1 ms Min
Figures / Time display figures value.
Timer : Display process time.
NO.1
Use when you initialize accumlated
figures value &time process value.
30 cps 16 ms Min
Reset Key
Use when you change the opertion
option of Counter / Timer.
Volume for conrolling Time setting range is variable from
output time(One-short time) 0.1 to 12.5 sec
Counter :Use when you input
setting value which youwant to
Number/Time setting count.
Timer : Use when you input setting Minimum signal time means ON time.
time.
 Power Supply Input Connection
Please note that voltage of inside circuit is increasing or decreasing in Input connection when the exterior equipment is
time between 100 ms after power on and 200 ms after power off.
‘NPN’ output
Non-contact input(NPN voltage output) Contact input (NPN)

6 4 6 4

Power for Sensor 7 7

12 V d.c 100 mA Max. of power for sensor is built-in. 8 5 8 5

Proximity Switch - Approx. 10 mA 9 1 9 1
Rotary Encoder - Approx. 30 mA
10 3 10 3

Mode Selection Switch

Non-contact input(NPN open collector output)
GF4-P41N / GF4-T40N
Please change NPN/PNP S/W
6 4
attached in the side of GF4 into
7
the direction NPN
8 5 when the exterior equipment is
NPN .
9 1
Set counting speed as 30 cps in
10 3
case of using contact and then use it.

Input connection when the exterior equipment is

‘PNP’ output
In case of an inducator, kindly set F or K as output mode
Non-contact input(PNP voltage output) Contact input (PNP)
GF4-P41S

6 4 6 4
7 7

8 5 8 5

9 1 9 1

10 3 10 3

Non-contact input(PNP open collector output)

Mode Selection
Please change NPN/PNP S/W
6 4
GF4 Series attached in the side of GF4 into
7
the direction NPN
8 5 when the exterior equipment is
SW1 Function
1
NPN .
9
Counter Counter Timer Set counting speed as 30 cps in
NO.6 10 3
Timer case of using contact and then use it.

SW1 NO.4.3.2. and 1 Range Up /

Input mode
(Refer to counter input mode) Down Count Timer Range
SW2 NO.6.5 and 4
Output mode Output mode
(Refer to output mode) SW1 UP mode SW1 Down mode

SW2 Function
Output type OFF - delay Output type
NO.3
On - dealy

SW1 Function
Selection of Selection of
Power reset
back up power NO.5 back up power
Back-up

SW1 Function
Selection of Decimal point
in 1st digit
decimal Point NO.2
NO decimal
Point

SW1 Function
Selection of 5 kcps
input frequency NO.1 ‘Set value’ display in reset
30 cps ‘0’ display in reset(up count)
(Down count)
Reset
 Counter input mode Output mode
GF4-P41N / GF4-P40N
A requires over minimum signal width and B requires over half of
minimum signal width. 0.1 ~ 12.5 s
The following timing diagram of Timer input is for the PNP mode. variable
In case of the NPN mode, it is reverse image against the PNP mode self-holding one short output
Rising situation of Input signal( ) Falling situation of Input signal( )

UP DOWN
Inhibiti

GF4-P41S

4
-1
3
-2
2
-3
1
-4

4
-1
3
-2
2
-3
1
-4