Overview

Definition and Background

Features and Datums
Datum Reference Frame
How the GD&T System Works
Material Conditions Modifiers
Bonus Tolerance
Feature Control Frame
Major Categories of Tolerances
14 Tolerance Measurements
General Rules of GD&T
+ /- Tolerancing vs. Geometric Tolerancing
 The GD&T Process
What is GD&T ?
Geometric Dimensioning and Tolerancing
- Uses standard, international symbols to describe parts in
a language that is clearly understood by any manufacturer.

This simple drawing shows

many of the symbols that
define the characteristics of
a workpiece and eliminates
the need for traditional
handwritten notes.
 The GD&T Process (con t)
A significant improvement over traditional dimensioning
methods in describing form, fit and function of parts.
Considered a mathematical language that is very precise.
Describes each workpiece in three zones of tolerance
relative to the Cartesian Coordinate System .
A little history:
Developed by Rene Descartes (pronounced day-kart), a
French mathematician, philosopher and scientist.
Descartes (Renatus Cartesius - Latin) born in 1596 in
France and died in 1650.
Formed much of the thought about the order of things
in the world.
Established three precepts about the method by which
we should examine all things.
 The GD&T Process (con t)
First precept was most important:

“Never accept anything for

true which you do not clearly
know to be such.”
This idea may have been the
starting point for the
development of modern science.
That idea of examining
everything in relation to what
should be “exact and perfect” led
to Descartes’ development of the
Cartesian Coordinate System – a
coordinate plane to make it
easier to describe the position of
objects.
 The GD&T Process (con t)
GD&T has developed as a method to question and measure
the truth about the form, orientation, and location of
manufactured parts.
Like other languages, GD&T uses special punctuation and
grammar rules.
Must be used properly in order to prevent misinterpretation.
Comparable to learning a new language.
 The GD&T Process (con t)

Background:
Standards come from two organizations:
* ASME (American Society of Mechanical Engineering)
* ISO (International Organization for Standardization)
- ASME Y14.5 and ISO 1101 are the written standards.
- Gives inspectors a clear understanding of what the
designer intended.
 The GD&T Process (con t)

When Should GD&T be Used :

When part features are critical to function or interchangeability.
When functional gauging techniques are desirable.
When datum references are desirable.
When computerization techniques are desirable.
When standard interpretation or tolerance is not already implied.

Why Should GD&T be Used:

It saves money.
Provides for maximum producibility of parts.
Insures that design tolerance requirements are specifically stated
and carried out.
Adapts to, and assists, computerization techniques.
Ensure interchangeability of mating parts at assembly.
Provides uniformity and convenience in drawing.
 The GD&T Process (con t)

Advantages of GD&T:
Significant improvement over traditional methods.
Compact language, understood by anyone who learns the
symbols.
Replaces numerous notes.
Offers greater design clarity, improved fit, better
inspection methods, and more realistic tolerances.
Ensure that:
Good parts pass inspection.
Bad parts are caught and rejected.
Common Tolerance Symbols
We will discuss examples of these symbols as we proceed
with the course.
Understanding the Terms
 Radius Two types of radii can be applied. The radius (R) distinguishes
general applications. The controlled radius (CR) defines radius shapes that
require further restrictions.
 Statistical Tolerancing Symbol - Tolerances are sometimes calculated using
simple arithmetic. If a part is designated as being statistically toleranced, it
must be produced using statistical process controls.
 With Size A feature said to be with size is associated with a size
dimension. It can be cylindrical or spherical or possibly a set of two
opposing parallel surfaces.
 Without Size A plane surface where no size dimensions are indicated.
 Feature Control Frames Probably the most significant symbol in any
geometric tolerancing system. Provides the instructions and requirements
for its related feature.
 Material Condition Modifiers Often necessary to refer to a feature in its
largest or smallest condition or regardless of its feature size.
– MMC (Maximum Material Condition)
– LMC (Least Material Condition)
– RFS (Regardless of Feature Size)
Datums and Features
 All manufactured parts exist in two states:
- The imaginary, geometrically perfect design
- The actual,
actual physical, imperfect part.

DATUMS:
 A part design consists of many datums (each is a
geometrically perfect form).

 Datums can be :
- straight lines
- circles
- flat planes
- spheres
- cylinders
- cones
- a single point
Datums and Features (con t)
 Datums are “imaginary”. They are assumed to be
“exact” for the purpose of computation or reference.

 Utilizing datums for reference, the tolerances take on

new meaning.

 Now, features can have a tolerance relationship to each

other both in terms of form and also location.
Datums and Features (con t)

 Features:
– Real, geometric shapes that make up
the physical characteristics of a part.
– May include one or more surfaces:
 Holes
 Screw threads
 Profiles
 Faces
 Slots

– Can be individual or may be

interrelated.
– Any feature can have many
imperfections and variations.
Datums and Features (con t)
 Tolerances in a design tell the inspector how much variance or
imperfection is allowable before the part must be considered unfit
for use.
 Tolerance is the difference between the maximum and minimum
limits on the dimensions of the part.
 Since parts are never perfect, a datum feature is used during
inspection, to substitute for the perfect datum of the drawing.
 Datum features are simply referred to as datums.

We cannot make a
“perfect” part.
The Datum Reference Frame
 GD&T positions every part within a Datum Reference
Frame .
 The DRF is by far the most important concept in the geometric
tolerancing system.
 The skeleton, or frame of reference to which all requirements
are connected.
 Understanding the DRF is and
critical inprofile
order to grasp the
position
concepts of
The Datum Reference Frame (con t)
 Engineering, manufacturing, and inspection all share a
common three plane concept.
 These three planes are:
– Mutually perpendicular
– Perfect in dimension and orientation
– Positioned exactly 900 to each other.
 This concept is called the Datum Reference Frame.
Frame
The Datum Reference Frame (con t)
 The three main features of the DRF are the planes, axes,
axes and
points.
points
 The DRF consists of three imaginary planes, similar to the X,
Y, & Z axes of the traditional coordinate measuring system.
 The planes exist only in theory and make up a perfect,
imaginary structure that is mathematically perfect.
 All measurements originate from the simulated datum planes.

This flat, granite surface plate and

the angle block sitting on it , can
represent two of the three datum
planes.
The Datum Reference Frame (con t)

 The Datum Reference Frame will

accommodate both rectangular
and cylindrical parts.
 A rectangular part fits into the
corners represented by the inter-
section of the three datum planes.
 The datum planes are imaginary
and therefore perfect.
 The parts will vary from these planes, even though the variations
will not be visible to the naked eye.
 The most important concept to grasp is that when the part is placed
into an inspection apparatus, it must make contact with the
apparatus planes in the order specified by the feature control frame.
(Primary, then secondary, then tertiary). This is the only way to
assure uniformity in the measurement of different parts.
The Datum Reference Frame (con t)
 A cylindrical part rests on
the flat surface of the primary
plane and the center of the
cylinder aligns with the
vertical datum axis created
by the intersection of the planes.

 In this case, it becomes very

important to be able to establish
the exact center of the part,
whether it is the center of a solid surface, or the center of a
hole.

 Cylindrical parts are more difficult to measure.

Implied Datums
 The order of precedence in the selection and establishment of
datums is very important.
 The picture below shows a part with four holes, located from
the edges with basic dimensions.

 The datums are not called out in the feature control frame, but
they are implied by the dimensions and by the edges from
which those dimensions originate. Thus, we imply that these
edges are the datums.
Implied Datums (con t)
 Problems with implied datums:
– We do not know the order in which they are
used.
– We know the parts are not perfect.
– None of the edges are perfectly square.
– The 90o corners will not be perpendicular.
 In theory, even if the corners were out of perpendicularity by
only .0001, the part would still “rock” back and forth in the
“theoretically perfect” datum reference frame.
The Order of Datums
 GD&T instructions designate which feature of the part will be the
primary, secondary, or tertiary datum references.
 These first, second and third datum features reflect an order of
importance when relating to other features that don t touch the
planes directly.
 Datum orders are important because the same part can be inspected
in several different ways, each giving a different measurement.

Creating a Datum Reference Frame

and an order of importance is
mandatory in order to achieve
interchangeable parts.
Improper positioning could result in
measurement errors unless the
preferred positioning in the
inspection fixture is indicated in the
drawing.
The Order of Datums (con t)
 The primary datum feature must have at least three points of contact
with the part and contacts the fixture first.
 The secondary has two points of contact and the tertiary has three
points of contact with the part.
 This process correctly mirrors the datum reference frame and
positions the part the way it will be fitted and used.
SECTION 2 - HOW THE GEOMETRIC SYSTEM WORKS
 This section introduces the geometric system and explains
the major factors that control and/or modify its use.

 Those important factors are:

 Plus/Minus Tolerancing
 Geometric Tolerance Zones
 The difference between geometric and limit tolerancing.
 Material Condition Modifiers
 Bonus Tolerance
 The Feature Control Frame
Plus / Minus Tolerancing
 Plus/ Minus tolerancing, or limit
tolerancing is a two-dimensional
system.
 When the product designer, using
drafting or CAD equipment draws
the part, the lines are straight,
angles are perfect, and the holes are
perfectly round.
 When the part is produced in a
manufacturing process, there will be
errors.
 The variations in the corners and
surfaces will be undetectable to the
human eye.
 The variations can be picked up
using precise measurements such
as a CMM.
Plus / Minus Tolerancing (con t)
 In a plus/minus tolerancing system, the datums are implied
and therefore, are open to varying interpretations.

 Plus/minus tolerancing works well when you are considering

individual features. However, when you are looking at the
relationship between individual features, plus/minus
tolerancing is extremely limited.

 With the dawn of CAD systems and CMMs, it has become

increasingly important to describe parts in three dimensional
terms, and plus/minus tolerancing is simply not precise
enough.
Geometric Tolerance Zones
 A geometric tolerancing system establishes a coordinate
system on the part and uses limit tolerancing to define the
form and size of each feature.

 Dimensions are theoretically exact and are used to define the

part in relation to the coordinate system.

 The two most common geometric characteristics used to

define a feature are position and profile of the surface.
Geometric Tolerance Zones (con t)
 Referring to the angle block below, position tolerance is located in the first
block of the feature control frame. It specifies the tolerance for the location
of the hole on the angle block. The boxed dimensions define what the
exact location of the center of the hole should be. 1.000 x 1.500. The
position tolerance block states that the center of the hole can vary no more
than .010 inches from that perfect position, under Maximum Material
Condition. The position tolerance zone determines the ability of the
equipment used to produce the part within limits. The tighter the position
tolerance is, the more capable the equipment. Position tolerance is merely a
more concise manner in which to communicate production requirements.
Geometric Tolerance Zones (con t)
 Profile tolerance (half-circle symbol) is specified in the second block of the feature
control frame. It is used to define a three dimensional uniform boundary that the surface
must lie within. The tightness of the profile tolerance indicates the manufacturing and
verification process. Unimportant surfaces may have a wide tolerance range, while
important surfaces will have a very tight profile tolerance range.
 Form tolerance refers to the flatness of the part while orientation tolerance refers to the
perpendicularity of the part specified on the datums. These two tolerances are chosen
by the designer of the part in order to match the functional requirements of the part.
Form and orientation tolerances control the instability of the part.
Geometric vs. Bilateral, Unilateral & Limit Tolerancing

 The difference between geometrically toleranced parts and limit

toleranced parts is quite simple. Geometric tolerances are more
precise and clearly convey the intent of the designer, using specified
datums. It uses basic dimensions which are theoretically exact and
have zero tolerance.

 Limit tolerancing produces a part that uses implied datums and

larger, less exact tolerances that fall into three basic categories:

 Bilateral tolerances specify the acceptable

measurements in two opposite directions
from a specified dimension.

 Unilateral tolerances define the acceptable

range of measurements in only one direction
from a given dimension.

 Limit dimensions give the acceptable

measurements within two absolute
dimensions.
 Material Condition Modifiers
 Used in geometric tolerancing.
 Have tremendous impact on stated tolerance or datum reference.
 Can only be applied to features and datums that specify size. (holes,
slots, pins, tabs). If applied to features that are without size, they
have no impact.
 If no modifier is specified in the feature control frame, the default
modifier is RFS regardless of feature size.
 There are three material condition modifiers:
 Maximum Material Condition – (MMC) – This modifier gives room for
additional position tolerance of up to .020 as the feature departs from the
maximum material condition. This is a condition of a part feature
wherein, it contains the maximum amount of material, or the minimum
hole-size and maximum shaft-size.

.245
.255

Emphasis is on
the word “Material”.

.250 + .005 .250 + .005

Material Condition Modifiers (con t)
 Least Material Condition – (LMC) – This is the opposite of the
MMC concept. This is a part feature which contains the least
amount of material, or the largest hole-size and smallest shaft-
size.

.255
.245

.250 + .005 .250 + .005

 Regardless of Feature Size – (RFS) – This is a term used to

indicate that a geometric tolerance or datum reference applies at
any increment of size of the feature within its size tolerance.
RFS is stricter and greatly affects the part’s function, but is
necessary for parts that require increased precision.
Bonus Tolerance
 Material condition modifiers give inspectors a powerful method of checking
shafts and holes that fit together.
 Both MMC and LMC modifiers allow for bonus tolerance.
 This hole has a
certain position Hole drilled at MMC
tolerance, but at
MMC, the hole is
smaller, tighter, and
exhibits a perfect
cylindrical form.

 As more material is
removed from
around the hole, the
space is larger and
provides a looser fit Bonus Tolerance
for the shaft.
Therefore, the
position tolerance for
the hole can be
increased, and both
the shaft and the
hole will still fit. This
increased tolerance
is called the bonus
tolerance of the hole
and changes as the
size of the hole
increases. Hole drilled at LMC
The Feature Control Frame
 GD&T instructions contain a large amount of information.
 Each feature is given a feature control frame.
 Frame reads from left to right, like a basic sentence.
 Instructions are organized into a series of symbols that fit into
standardized compartments.
The Feature Control Frame (con t)
 The first compartment defines the geometric characteristic of the feature, using
one of the 14 standard geometric tolerance symbols ( means position ). A
second feature control frame is used if a second geometric tolerance is needed.

 The second compartment contains the entire tolerance for the feature, with an
additional diameter symbol to indicate a cylindrical or circular tolerance zone.
No additional symbol is needed for parallel lines or planes. If needed, material
condition modifiers would also appear in the second compartment.
The Feature Control Frame (con t)
 The third compartment indicates
the primary datum which locates
the part within the datum
reference frame. Every related
tolerance requires a primary
datum but independent
tolerances, such as form
tolerances, do not.

 The fourth and fifth compartments

contain the secondary and
tertiary datums. Depending on
the geometric tolerance and the
function of the part, secondary
and tertiary datums may not be
necessary.
 Straight & Cylindrical
Tolerances
• Types of Tolerances 5 major groups.
- Form Tolerances (flatness, circularity, cylindricity
& straightness.
- Profile Tolerances (profile of surface, profile of
line).
Powerful tolerances that control several aspects.
- Orientation Tolerances (perpendicularity, parallelism,
and angularity).
- Location Tolerances (concentricity, symmetry, and
position).
- Runout Tolerances (circular and total). Used only on
cylindrical parts.
Straight & Cylindrical Tolerances (con
t)

An individual tolerance
is not related to a
datum. A related
tolerance must be
compared to one or
more datums.
 Straightness and Flatness

• Two types of form tolerances.

Both define a feature independently.

- Straightness is a two-dimensional tolerance.
Edge must remain within two imaginary
parallel lines to meet straightness tolerance.
Distance between lines is determined by size
of specified tolerance.
- Most rectangular parts have a straightness
tolerance.
- Edge or center axis of a cylinder may have a
straightness tolerance.
Greatly exaggerated
 Straightness and Flatness (con t)

• Flatness is a three-dimensional
version of straightness tolerance.
- Requires a surface to be within
two imaginary, perfectly flat,
perfectly parallel planes.
- Only the surface of the part, not
the entire thickness, is
referenced to the planes.
- Most often used on rectangular
or square parts.
- If used as a primary datum,
flatness must be specified in the
drawing.
 Circularity and
Cylindricity

• Circularity (often called

roundness).
- Two-dimensional tolerance.
- Most often used on cylinders.
- Also applies to cones and spheres.
- Demands that any two-
dimensional cross-section of a
round feature must stay within the
tolerance zone created by two
concentric circles.
- Most inspectors check multiple
cross-sections.
- Each section must meet the
tolerance on its own.
Circularity and Cylindricity
(con t)

• Cylindricity specifies the

roundness of a cylinder along its
entire length.
- All cross-sections of the cylinder
must be measured together, so
cylindricity tolerance is only
applied to cylinders.

• Circularity and cylindricity cannot

be checked by measuring various
diameters with a micrometer.

• Part must be rotated in a high-

The thickness of the wall of a pipe represents the
precision spindle. Best method cylindricity tolerance zone.
would be to use a Coordinate
Measuring Machine (CMM).
 Profile of a Line and Surface

• The two versions of profile

tolerance.
• Both can be used to control
features such as cones, curves, flat
or irregular surfaces, or cylinders.
• A profile is an outline of the part
feature in one of the datum planes.
• They control orientation, location,
size and form.

• The profile of a line is a two-

dimensional tolerance.
- It requires the profile of a feature
to fall within two imaginary parallel
lines that follow the profile of the
feature.
Profile of a Line and Surface (con t)

• Profile of a Surface is three-

dimensional version of the line
profile.

- Often applied to complex and

curved contour surfaces such
as aircraft and automobile
exterior parts.
- The tolerance specifies that
the surface must remain within
two three-dimensional shapes.
Orientation and Location Tolerances
 Angularity, Perpendicularity, and Parallelism
- These tolerances define the angle and
orientation of features as they relate to other
features.
- They specify how one or more datums
relate to the primary toleranced feature.
(Relational Tolerances)

Angularity - A three-dimensional tolerance.

* Shape of the tolerance zone depends on
shape of the feature.
* If applied to flat surface, tolerance zone
becomes two imaginary planes,
parallel to ideal angle.
* If applied to a hole, it is referenced to an
imaginary cylinder existing around
the ideal angle and center of the hole
must stay within that cylinder.
Orientation and Location Tolerances (con t)

 Perpendicularity and Parallelism : Three-dimensional

tolerances that use the same tolerance zones as
angularity.
 Difference is that parallelism defines two features that
must remain parallel to each other, while
perpendicularity specifies a 90-degree angle between
features.

Parallelism Perpendicularity
Orientation and Location Tolerances (con t)

 Parallelism and Flatness are often confused.

- Flatness is not related to another datum plane.

 When an orientation tolerance is applied to a flat

surface, it indirectly defines the flatness of the
feature.
Orientation and Location Tolerances (con t)

 Position is one of most common location tolerances.

- A three-dimensional, related tolerance.
- Ideal, exact location of feature is called
true position.
- Actual location of a feature is compared to the ideal
true position.
- Usually involves more than one datum to determine
where true position should be.
- Has nothing to do with size, shape, or angle, but
rather “where it is”.
Orientation and Location Tolerances (con t)

 In the case of holes, the tolerance

involves the center axis of the hole
and must be within the imaginary
cylinder around the intended true
position of the hole.

 If toleranced feature is rectangular,

the zone involves two imaginary
planes at a specified distance from
the ideal true position.

 Position tolerance is easy to inspect

and is often done with just a
functional gage (go / no-go gage).
 Orientation and Location Tolerances (con t)

 Concentricity and Symmetry are

both three-dimensional tolerances.

 Concentricity is not commonly

measured.
- It relates a feature to one or more
other datum features.

- This shaft is measured in multiple

diameters to ensure that they share
a common center-axis.
Orientation and Location Tolerances (con t)

- Symmetry is much like

concentricity.
* Difference is that it controls
rectangular features and involves
two imaginary flat planes, much like
parallelism.

* Both symmetry and

concentricity are difficult to measure
and increase costs of inspection.
* When a certain characteristic,
such as balance, is important, these
tolerances are very effective.
Orientation and Location Tolerances (con t)

 Circular and Total Runout are three-

dimensional and apply only to
cylindrical parts.
 Both tolerances reference a
cylindrical feature to a center datum-
axis, and simultaneously control the
location, form and orientation of the
feature.

 Circular runout can only be inspected

when a part is rotated.
- Calibrated instrument is placed
against the surface of the rotating
part to detect the highest and lowest
points.
- The surface must remain within two
imaginary circles, having their centers
located on the center axis.
 Orientation and Location Tolerances (con t)
 Total Runout is similar to circular
runout except that it involves
tolerance control along the entire
length of, and between, two
imaginary cylinders, not just at cross
sections.

- By default, parts that meet total

runout tolerance automatically
satisfy all of the circular runout
tolerances.

- Runout tolerances, especially total

runout, are very demanding and
present costly barriers to
manufacturing and inspection.
 GENERAL RULES OF GD&T
 Geometric dimensioning and tolerancing is based
on certain fundamental rules. Some of these follow
from standard interpretation of the various
characteristics, some govern specification, and
some are General Rules applying across the entire
system.
 Rule #1 is the Taylor Principle, attributed to William Taylor who in 1905
obtained a patent on the full form go-gage . It is referred to as Rule #1 or
Limits of Size in the Y14.5M, 1994 standard. The Taylor Principle is a very
important concept that defines the size and form limits for an individual
feature of size. In the international community the Taylor Principle is often
called the envelope principle .
GENERAL RULES OF GD&T (con t)

 Variations in size are possible

while still keeping within the
perfect boundaries. The
limits of size define the “size”
(outside measurements) as
well as the “form” (shape) of
a feature. The feature may
vary within the limits. That is,
it may be bent, tapered, or
out of round, but if it is
produced at its maximum
material condition, the form
must be perfect. (or, as close as
possible)
GENERAL RULES OF GD&T (con t)

 Individual Feature of Size:

– When only a tolerance of size is specified, the
limits of size of an individual feature prescribe
the extent to which variations in its geometric
form as well as size are allowed.
 Variation of Size:
– The actual size of an individual feature at any
cross section shall be within the specified
tolerance size.
GENERAL RULES OF GD&T (con t)

 Variation of Form:
The form of an individual feature is controlled by its
limits of size to the extent prescribed in the following
paragraph and illustration.
– The surface or surfaces of a feature shall not extend beyond a
boundary (envelope) of perfect form at Maximum Material
Condition (MMC). This boundary is the true geometric form
represented by the drawing. No variation is permitted if the
feature is produced at its MMC limit of size. (Plain English- If the
part is produced at Maximum Material Condition, it shall not be bigger
than the perfect form of the drawing.)

– Where the actual size of a feature has departed from MMC

toward LMC, a variation in form is allowed equal to the amount
of such departure.

– There is no requirement for a boundary of perfect form at LMC.

Thus, a feature produced at LMC limit of size is permitted to
vary from true form to the maximum variation allowed by the
boundary of perfect form at MMC.
GENERAL RULES OF GD&T (con t)

 Rule #2 Applicability of MMC, LMC, & RFS :

 In the current ASME Y14.5M-1994, Rule # 2 governs the
applicability of modifiers in the Feature Control Frame. The
rule states that “Where no modifying symbol is specified with
respect to the individual tolerance, datum reference, or both,
then RFS (Regardless of Feature Size) automatically applies
and is assumed. Since RFS is implied, it is not necessary to
include the symbol. Therefore, the symbol S has been
eliminated from the current standard.
 MMC and LMC must be specified where required.
 Rule #3 Eliminated:
 Rule #4 & #5 - Eliminated:
GENERAL RULES OF GD&T (con t)

 What is Virtual Condition ?

Depending upon its intended purpose, a feature may be
controlled by tolerances such as form, size, orientation
and location. The collective (total) effects of these factors
determine the clearances between mating parts and they
establish gage feature sizes. The collective effect of these
factors is called virtual condition .

Virtual condition is a constant boundary created by the

total effects of a size feature based on its MMC or LMC
condition and the geometric tolerance for that material
condition.
GENERAL RULES OF GD&T (con t)

 The size tolerance for the pin (.

250 + .002) and the location and
perpendicularity tolerances listed
in the Feature Control Frame
combine to create two possible
virtual sizes. First, regardless of
its position or angle, the pin must
still lie within the .002 boundary
specified for its width. However,
the tolerance for perpendicularity
allows a margin of .005. So, if the
part were produced at MMC to .
252 and it deviates from
perpendicularity by the .005
allowed, the total virtual size of
the pin can be considered to be .
257 in relation to datum A.
GENERAL RULES OF GD&T (con t)

 Second, the position tolerance of .

010 combined with the size
tolerance of .002 would produce a
virtual size of .262 in relation to
datums A, B and C.

This means that an inspection

gage would have to have a hole of
.262 to allow for the combined
tolerances, even though the pin
can be no more than .252
diameter. Therefore, three
inspections would be necessary in
order to check for size,
perpendicularity, and location.
GENERAL RULES OF GD&T (con t)

 Virtual size of a hole

– When calculating the virtual size of a hole, you must
remember the rule concerning Maximum Material Condition
(MMC) and Least Material Condition (LMC) of holes. Recall
that when machining a hole, MMC means the “most
material that can remain in the hole”. Therefore, a hole
machined at MMC will be smaller and a hole machined at
LMC will be larger. It is important to read the Feature
Control Frame information carefully to make sure you
understand which feature is specified and what material
conditions are required.
GENERAL RULES OF GD&T (con t)

Calculate the virtual sizes for the indicated features.

. .192

.186

.387

.379
 Limit (+/-) Tolerancing vs. Geometric Tolerancing

• Limit Tolerancing (+/-) is

restricted when inspecting
all features of a part and
their relationships.
– (+/-) is basically a two-
dimensional tolerancing
system (a caliper/
micrometer type
measurement.
– Works well for individual
features.
– Does not control the
relationship between
individual features.
 Limit (+/-) Tolerancing vs. Geometric Tolerancing

• Visually, the block will look straight and

square. The variations will be so small that
they are undetectable with the human eye.
However, when the parts are inspected
using precision measuring equipment such
as a CMM, the angle block starts to look like
the bottom drawing (greatly exaggerated).

• The block is not square in either view. The

surfaces are warped and not flat. The hole
is not square to any surface and it is not
round. It is at this point that the limit
system of tolerance breaks down.
Plus/minus tolerances are two dimensional;
the actual parts are three dimensional.
Limit tolerances usually do not have an
origin or any location or orientation relative
to datums. The datums are usually implied.
Most of our modern engineering,
manufacturing and quality systems all work
square or relative to a coordinate system.
Parts must be described in a three
dimensional mathematical language to
ensure clear and concise communication of
information relating to product definition.
That is why we need geometric tolerancing.
 Limit (+/-) Tolerancing vs. Geometric Tolerancing

• The same angle block

is now done with
geometrics.
– Notice that datums A, B
and C have been
applied to features on
the part establishing a
X, Y and Z Cartesian
coordinate system.
– Geometrics provides a
very clear, concise
three dimensional
mathematical language
for product definition.
 Limit (+/-) Tolerancing vs. Geometric Tolerancing

• A close-up look at the angle block shows how the features are controlled.
For example, the hole location is controlled by the feature control frame
shown below.
Hole Location Tolerance Zone
.630
.620

.010 M ABC

.010 Tolerance Zone

1.000

1.500

The MMC condition dictates a smaller position tolerance. If the hole is made to the Least Material Condition
(LMC), resulting in a larger hole, then the hole location can be farther off and still align with the mating pin.
.010 when hole size is .620 (MMC)
.020 when hole size is .630 (LMC)
 Limit (+/-) Tolerancing vs. Geometric Tolerancing

• Geometric Tolerancing Applied to an Angle Block 2D View

The above drawing depicts the part as the

designer intended it to be. In reality, no
part can ever be made perfect. It will
always be off by a few millionths of an
inch. With that in mind, the drawing on
the right illustrates how the GD&T
instructions control the features of the
part. The drawing is greatly exaggerated
to show what would be undetectable by
the naked eye.
 Limit (+/-) Tolerancing vs. Geometric Tolerancing

• Geometric Tolerancing vs- Limit Tolerancing What s The Difference?

– This drawing is produced using limit tolerancing. There is no feature control
frame, so the design relies on the limits established by the + dimensions, and
the datums are all “implied”.
 Limit (+/-) Tolerancing vs. Geometric Tolerancing

• Notice that the position of the hole is implied as being oriented from the
lower left hand corner. Because we are forced to use the plus/minus
.0035 limit tolerance, the hole tolerance zone ends up looking like a
square. A close look at the part reveals that the axis of the hole can be
off farther in a diagonal direction than across the flat sides.

1.000 + .0035

1.500 + .0035
 Limit (+/-) Tolerancing vs. Geometric Tolerancing

• Regardless of Feature Size RFS

– Modifier rule # 2 states that unless otherwise specified, all geometric
tolerances are by default implied to be RFS – Regardless of Feature Size. Since
all unspecified tolerances apply at RFS, there is no need for a RFS symbol. The
drawing below illustrates how RFS affects the location tolerance of a feature.

What this means to the

machinist is that no matter if
the holes are machined at
the upper limit of .268 or the
lower limit of .260, their
location is still restricted to
the .005 position tolerance
zone.
 Summary

• GD&T (geometric dimensioning and

tolerancing) is an international design
standard.

• Uses consistent approach and compact

symbols to define and control the features of
manufactured parts.

• Is derived from the two separate standards of

ASME Y14.5M and ISO 1101.

• Technically, GD&T is a drafting standard.

 Summary
• Helps inspectors improve their methods by
emphasizing fit, form and function.

• Compares the physical, imperfect features

of a part to its perfect, imaginary form
specified in the design drawing.

• Controls flatness, straightness, circularity,

cylindricity, and four form tolerances that
independently control a feature.

• Other tolerances, such as location, runout,

and orientation must be referenced to
another datum.
 Summary

• The profile tolerances can define a feature

independently.

• A related datum can further define the

orientation and location.

• A series of internationally recognized symbols

are organized into a feature control frame.

• The control frame specifies the type of

geometric tolerance, the material condition
modifier, and any datums that relate to the
feature.