S6720-54C-EI-48S-DC Datasheet

Get a Quote

Overview
Huawei S6720-54C-EI-48S-DC switch is one of the Huawei S6720 series Switches. The S6720 series offers high-availability, scalable 10 Gbit/s server access for
Internet Data Centers (IDCs) and large traditional data centers. It also provides optional configuration of 4 x 40 GE QSFP+ interface card gives the S6720-EI Series
Switches unusual flexibility: use to provide access to high-bandwidth server-based applications, or as a core or aggregation switch in enterprise campus networks.

Quick Specs
Figure 1 shows the appearance of Huawei S6720-54C-EI-48S-DC switch.

Table 1 shows the Quick Specs.

Product Code S6720-54C-EI-48S-DC

Ports 48 x 10 GE SFP+, 2 x 40 GE QSFP+ ports

Interface Slot 1

Power Supply DC Power Supply

Forwarding Performance 1,080 Mpps

Switching Capacity 2.56 Tbit/s

Stack Supported

- Any 10GE SFP+ ports (a maximum of 16 physical ports)

Stack Ports
- Any 40GE QSFP+ ports (a maximum of 6 physical ports)

Memory (RAM) 2 GB

Flash 240 MB

Dimensions (W x D x H) 44.2 cm x 42 cm x 4.44 cm

Weight (Kg) 10.2 Kg

Product Details
Figure 2 shows the front panel of Huawei S6720-54C-EI-48S-DC switch.
Note:

(1) 48 × 10GE SFP+ ports (4) ETH management port

(2) 2 × 40GE QSFP+ ports (5) One console port

(3) One USB port

Figure 3 shows the back panel of Huawei S6720-54C-EI-48S-DC switch.

Note:

(1) Ground screw (4) Power module slot 2

(2) Rear card slot (5) Power module slot 1

(3) Fan slot

The Accessories
Table 2 shows the recommended transceivers, card and power module.

Model Description

GE-SFP Optical Transceiver

SFP-1000BaseT Electrical Transceiver, SFP, GE, Electrical Interface Module(100m,RJ45)

eSFP-GE-SX-MM850 Optical Transceiver, eSFP, GE, Multi-mode Module(850nm,0.55km,LC)

SFP-GE-LX-SM1310 Optical Transceiver, eSFP, GE, Single-mode Module(1310nm,10km,LC)

S-SFP-GE-LH40-SM1310 Optical Transceiver, eSFP, GE, Single-mode Module(1310nm,40km,LC)

 S-SFP-GE-LH40-SM1550 Optical Transceiver, eSFP, GE, Single-mode Module(1550nm,40km,LC)

10GE SFP+ optical transceiver

SFP-10G-USR 10GBase-USR Optical Transceiver,SFP+,10G,Multi-mode Module(850nm,0.1km,LC)

OMXD30000 Optical Transceiver,SFP+,10G,Multi-mode Module(850nm,0.3km,LC)

OSX010000 Optical Transceiver,SFP+,10G,Single-mode Module(1310nm,10km,LC)

40GE optical transceiver

QSFP-40G-ER4 40GBase-ER4 Optical Transceiver,QSFP+,40G,Single-mode Module (1310nm,40km,LC)

QSFP-40G-LR4 40GBase-LR4 Optical Transceiver,QSFP+,40GE,Single-mode Module(1310nm,10km,LC)

Card

ES5D21Q04Q01 Huawei 4 × 40 Gig QSFP+ interface card(used in S6720EI series)

Power Module

PDC-350WA-B 350W DC Power Module(Back to Front,Power panel side exhaust)

Compare to Similar Items

Table 3 shows the comparison of Huawei S6720-30C-EI-24S-DC,S6720-54C-EI-48S-DC and S6720S-26Q-EI-24S-DC.

Models S6720-30C-EI-24S-DC S6720-54C-EI-48S-DC S6720S-26Q-EI-24S-DC

Switching Capacity 2.56 Tbit/s 2.56 Tbit/s 2.56 Tbit/s

Forwarding
720 Mpps 1,080 Mpps 480 Mpps
Performance

24 x 10 GE SFP+, 2 x 40 GE QSFP+
Fixed Ports 24 x 10 GE SFP+, 2 x 40 GE QSFP+ ports 48 x 10 GE SFP+, 2 x 40 GE QSFP+ ports
ports

One extended slot for 4 x 40 GE QSFP+ One extended slot for 4 x 40 GE QSFP+
Extended Slot Not supported
interface card interface card

Power Supply DC Power Supply DC Power Supply DC Power Supply

Get more information

Do you have any question about the Huawei S6720-54C-EI-48S-DC switch?

Contact us now via Live Chat or sales@router-switch.com.

Specification

S6720-54C-EI-48S-DC Specifications

Fixed Ports 48 × 10 GE SFP+, 2 x 40 GE QSFP+ ports

Extended Slot One extended slot for 4 x 40 GE QSFP+ interface card

288K MAC address entries

MAC Address MAC address learning and aging
Table Static, dynamic, and black hole MAC address entries
Packet filtering based on source MAC addresses
 4K VLANs
Guest VLAN and voice VLAN
VLAN VLAN assignment based on MAC addresses, protocols, IP subnets, policies, and ports
1:1 and N:1 VLAN Mapping
QinQ and selective QinQ

Static routing, RIPv1, RIPv2, ECMP, and URPF

OSPF, IS-IS, and BGP
IPv4 Routing VRRP
Policy-based routing
Routing policy

Static route
RIPng
IPv6 Routing OSPFv3
BGP4+
ISISv6

Neighbor Discovery (ND)

PMTU
IPv6 ping, IPv6 tracert, and IPv6 Telnet
IPv6 Features
6to4 tunnel, ISATAP tunnel, and manually configured tunnel
ACLs based on the source IPv6 address, destination IPv6 address, Layer 4 ports, or protocol type
MLD v1/v2 snooping

Static Layer 2 multicast MAC address

MAC-based multicast forwarding
IGMP snooping and IGMP fast leave
Multicast VLAN
MLD snooping
IGMP proxy
Multicast
Controllable multicast
Port-based multicast traffic statistics
IGMP v1/v2/v3
PIM-SM, PIM-DM, and PIM-SSM
MSDP
MVPN

Rate limiting on packets sent and received by an interface

Packet redirection
Port-based traffic policing and two-rate three-color CAR
Eight queues on each port
QoS/ACL WRR, DRR, SP, WRR + SP, and DRR + SP queue scheduling algorithms
Re-marking of the 802.1p priority and DSCP priority
Packet filtering at Layer 2 to Layer 4, filtering out invalid frames based on the source MAC address, destination MAC address, source IP
address, destination IP address, port number, protocol type, and VLAN ID
Rate limiting in each queue and traffic shaping on ports

MPLS MPLS, MPLS VLL, L3VPN

VPLS Martini VPLS

STP (IEEE 802.1d), RSTP (IEEE 802.1w), and MSTP (IEEE 802.1s)
BPDU protection, root protection, and loop protection
RRPP ring topology and RRPP multi-instance
Smart Link tree topology and Smart Link multi-instance, providing the millisecond-level protection switchover
Reliability
SEP
ERPS (G.8032v2)
BFD for OSPF, BFD for IS-IS, BFD for VRRP, and BFD for PIM
E-Trunk

User privilege management and password protection

DoS attack defense, ARP attack defense, and ICMP attack defense
Binding of the IP address, MAC address, interface, and VLAN
Port isolation, port security, and sticky MAC
Blackhole MAC address entries
Limit on the number of learned MAC addresses
Security
802.1x authentication and limit on the number of users on an interface
AAA authentication, RADIUS authentication and TACACS authentication
SSH v2.0
Hypertext Transfer Protocol Secure (HTTPS)
CPU defense
Blacklist and whitelist

Super Virtual Working as the parent node to vertically virtualize downlink switches as one device for management, supports two-layer clients architecture
Fabric (SVF) Support as a client node to be managed by SVF parent
 iStack (using service ports as stack ports)
MAC Forced Forwarding (MFF)
Virtual cable test
Ethernet OAM (IEEE 802.3ah and 802.1ag)
Local port mirroring and Remote Switched Port Analyzer (RSPAN), allowing an observing port to forward packets
Management and Remote configuration and maintenance using Telnet
Maintenance SNMP v1/v2c/v3
RMON
Web NMS
System logs and alarms of different levels
GVRP
MUX VLAN

Operating Operating temperature: 0m to 1,800m: 0°C to 45°C; 1,800m to 5,000m: 1°C decrease for every 220m increase in altitude
Environment Relative humidity: 5% to 95% (non-condensing)

DC:
Input Voltage Rated voltage range: –48V to –60V
Maximum voltage range: –36V to –72V

Dimensions (W x D
442 mm x 420 mm x 44.4 mm
x H)

DC:
Typical Power
without subcard: 185W
Consumption
with subcard: 204W

Want to Buy

Order Now Get a Quote

Why Router-switch.com

As a leading network hardware supplier, Router-switch.com focuses on original new ICT equipment of Cisco, Huawei, HPE,
Dell, Hikvision, Juniper, Fortinet, etc.

200+ 18,000+ $20,000,000 50%-98% 100%

Countries we Sold Customers Trusted Inventory Available Off Global List Price Safe Online Shopping

Contact Us

● Tel: +1-626-655-0998 (USA) +852-3050-1066 / +852-3174-6166

● Fax: +852-3050-1066 (Hong Kong)
● Email: sales@router-switch.com