Hawk - Tech Specs
Hawk Plug-in I/O Interface
Plug-in cards define the 9 inputs/
outputs, offering limitless options for
interfacing to sensors such as SDI-
Cellular LTE-M / NB-IoT 12, I²C, 1-Wire, iButton, 4-20mA, RS-
IoT Satellite Version Planned 485, RS-232*, Analog Inputs, Digital
Inputs, Pulse Counting, Digital
Outputs, Switched Power, and more
Status: New Product Introduction (*coming soon)
The Hawk is a robust plug-and-play IoT data
logger and sensor hub designed to support Multiple Power Options
an extensive range of sensor integrations. Power the Hawk with a large
internal rechargeable LiPo battery,
The Hawk is available in multiple power and external power including solar, or
housing variations. PCB, I/O Card, and Housing 2 x D Cell LTC batteries
sold separately, giving you the flexibility to
purchase only what you need to build your Multiple Housing Options
remote monitoring application.
Select from our ultra-rugged
housing options or build your own
Task Management
Powerful task management allows
you to schedule tasks or run tasks
based on sensor thresholds and
events
Remote Device Management
Over-the-air (OTA) remote device
configuration, management and
firmware updates
Hawk D Cell Housing
Copyright © Digital Matter 2023. All Rights Reserved. This device is designed, developed, and manufactured by Digital Matter.
For more information, please visit our website at www.digitalmatter.com.
HAWK PCB
Onboard Connectivity
The Hawk PCB is currently available with LTE-M/NB-IoT connectivity. IoT Satellite version planned.
LTE-M / NB-IoT Nordic nRF9160 Modem operates on all major global LTE-M and NB-IoT bands
Supported LTE bands:
LTE-M (Cat-M1): B1, B2, B3, B4, B5, B8, B12, B13, B14, B17, B18, B19, B20, B25, B26, B28, B66
NB-IoT (Cat-NB1/NB2): B1, B2, B3, B4, B5, B8, B12, B13, B17, B19, B20, B25, B26, B28, B66
SIM Size & Access Internal Micro 3FF SIM
Onboard Design and Mechanics
Operating Temperature -30°C to +60°C
LiPo Charger - At < -10°C and > +45°C the internal backup battery will not be charged as a safety
precaution due to the dangers associated with charging batteries at extreme temperatures
Self-Resetting Fuse Built-in self-resetting fuse makes installation simple and safe
Cellular Antenna Internal. Supports optional external antenna for maximum range.
GPS Antenna Internal
LiPo Battery Charger Onboard LiPo battery charger with selectable charge rate
3-Axis Accelerometer 3-Axis Accelerometer to detect tampering (planned in future firmware release)
Diagnostic LED 2 Diagnostic LEDs and Push Button for testing and operational status
Flash Memory Store months of records if device is out of cellular coverage
Onboard Temperature The device reports internal temperature and prevents the internal battery from charging in extreme
temperatures. Internal temperature provides an indication of ambient temperature but may not always
be precise. Use an external sensor for precise temperature monitoring.
Onboard Location
Module Nordic nRF9160 internal GPS
Constellation GPS
*Location Accuracy ~3m CEP, 50%, GPS, Open sky
GNSS Assistance GPS predicted ephemeris data for greater sensitivity and position accuracy
Low Noise Amplifier GPS signals are boosted by a low-noise amplifier (LNA) allowing operation in low signal
* Positioning accuracy specifications are provided by the GNSS supplier and reflect ideal conditions. Device configuration, installation,
environmental conditions, augmentation services, and many other factors may lead to variations in positioning accuracy.
02 - HAWK - Last Updated: April 2023 www.digitalmatter.com
Onboard Interfaces
Digital Input 1 x Digital Input with configurable pull up/pull down
0-40V DC input range
On/Off thresholds: On > 2V, Off < 1V
Can be used for pulse counting (max 40Hz)
Plugin Board The versatile and flexible Hawk architecture caters for plug-in cards that define the 9 inputs/outputs,
offering limitless options for interfacing to sensors. Flexible onboard output power to power your
sensors.
See the current card list below or contact us to discuss your requirements.
Onboard Smarts
Auto-APN Auto-APN allows the device to analyze the SIM card and select the correct APN details from a list that
is pre-loaded in the device’s firmware
Voltage Monitoring LiPo battery and external voltage readings for “Battery Low” and “Power Loss” alerts
Onboard Temperature Management Powerful onboard task management allows you to schedule tasks or run tasks based on sensor
thresholds and events, even when out of cellular coverage.
HAWK POWER OPTIONS
Large Rechargeable LiPo - Optional Support for External Power
Powered by 3500mAh rechargeable LiPo battery to support full season deployments. Optionally connect the Hawk to an external power source
(6-28V) such as a solar panel or grid power.
Large Rechargeable Battery 3500mAh LiPo rechargeable battery
Input Voltage 6-28V DC (max)
For continuous operation at high temperatures and high output load currents we recommend an input
voltage of 12V of higher
Self-Resetting Fuse Built-in self-resetting fuse makes installation simple and safe
Solar Power Support Designed to optionally use a variety of solar panels
D Cell Battery Pack
Powered by 2 x D Cell LTC batteries for a completely self-powered solution
User-Replaceable Batteries 2 x D Cell (3.6V per cell). Batteries not included.
*Lithium Thionyl Chloride (LTC)
Supported Battery Types
*Please dispose of Lithium batteries in a safe and responsible manner
03 - HAWK www.digitalmatter.com
HAWK HOUSING OPTIONS
We offer two ultra-rugged housing options
Hawk LiPo Housing
Designed to accommodate the PCB, I/O Card, and pre-installed 3500mAh rechargeable LiPo battery
Dimensions 180mm x 119mm x 39mm (7.1” x 4.7” x 1.5”)
Housing Non-branded housing for optional white-labeling
IP/IK Rating Ultra-rugged and waterproof IP68 and IK08-rated housing ensures the Hawk can withstand impact, fine
dust, and brief submersion
GORE® Vent Allows for pressure equalization while protecting against water and dust ingress
Installation Multiple installation options for securing the device with screws, bolts, cable ties, rivets, and more.
Includes 2 cable glands to allow for waterproof cable entry to the housing.
Hawk D Cell Housing
Designed to accommodate the PCB, I/O Card, and 2 x D Cell LTC Batteries
Dimensions 185mm x 150mm x 30mm (7.3” x 5.9” x 1.2”)
Housing Non-branded housing for optional white-labeling
IP/IK Rating Ultra-rugged and waterproof IP68 and IK08-rated housing ensures the Hawk can withstand impact, fine
dust, and brief submersion
GORE® Vent Allows for pressure equalization while protecting against water and dust ingress
Installation Multiple installation options for securing the device with screws, bolts, cable ties, rivets, and more.
Includes 2 cable glands to allow for waterproof cable entry to the housing.
Device Management
Flexible Configuration Configure sensor and position update rates, task management scheduling, and more
Device Management Platform Manage, monitor, configure, debug, update, and restart devices remotely from our cloud-based device
management system
Configuration App Configurable with DM-Link provisioning tool
Integration
Third-Party Integration TCP Direct or HTTPS Webhook
04 - HAWK www.digitalmatter.com
Security
Military-level AES-256 Encryption from device to Device Management Platform to protect the
Data Security integrity and confidentiality of telematics data. Data forwarded to third-party systems is sent via
HTTPS for end-to-end security.
Warranty
Manufacturer’s Warranty Two-year manufacturer’s warranty. Exclusions apply.
Certifications
FCC, CE, ACMA
Please visit support.digitalmatter.com
for a list of compliance specifications
Certifications are not valid if using the Hawk without a Digital Matter housing or with an external
and documentation for your region
antenna.
I/O CARD OPTIONS
The Hawk’s sensor interfaces and protocol are managed by “I/O Cards” - a range of plug-in Input/Output cards standardized for
common applications. See the current card list below or contact us to discuss your requirements.
AgTech1
Digital Inputs 1 x Digital Input with configurable pull up/pull down
0-40V DC input range
On/Off thresholds: On >2V, Off <1V
Can be used for pulse counting (max 40Hz)
Digital Outputs 1 x switched ground
I²C Yes
SDI-12 Yes
Switched Power Out 3.3V switched power for sensors
Switched Sensor Power 5V or 12V selectable power for sensors
1-Wire® or iButton® Yes
4-20mA 1 x 4-20mA input
05 - HAWK www.digitalmatter.com
I/O Card Options (continued)
AgTech2 (available soon)
Analogue Inputs 4 x Analogue Inputs (0-30V range)
Digital Output 1 x switched ground
SDI-12 Yes
Switched Power Out 3.3V switched power for sensors
Switched Sensor Power 5V or 12V selectable power for sensors
1-Wire® Yes
RS-1
Analogue Input 1 x Analogue Input (0-30V range)
Digital Input 1 x Digital Input with configurable pull up/pull down
0-40V DC input range
On/Off thresholds: On >2V, Off <1V
Can be used for pulse counting (max 40Hz)
Digital Output 1 x switched ground
RS485 Yes
Switched Power Out 3.3V switched power for sensors
Switched Sensor Power 5V or 12V selectable power for sensors
1-Wire ® Yes
4-20mA 1 x 4-20mA input
New Product Introduction
Prototypes of this device are currently under evaluation. Housing, design, components, and features may be subject to change.
Copyright © Digital Matter 2023. All Rights Reserved. This device is designed, developed, and manufactured by Digital Matter. For
more information, please visit our website at www.digitalmatter.com.
