Connection of Al-Nazeem S/S 8271 with 132kv Network in Riyadh City

PTS#22CC1143 & Contract Number:. 4400019349

LOTAM
 25 /11/2023
SER. MATERIAL/ MANUFACTURER NAME, NAME OF AUTHORIZED LOCAL TYPE/MODEL AND RATING TYPE TESTS REMARKS/OBSERVATIONS (NGSA
EQUIPMENT PREQUALIFIED PLANT, REPRESENTATIVE DETAILS (DATE,TEST APPROVAL LETTER,EXTENDED
DESCRIPTION LOCATION,CITY/COUNTRY AND /VENDOR (IF ANY) LABORATORY, WARRANTY)
COMPLETE ADDRESS P.O.B., STREET ADDRESS, LOCATION AND
#, WEBSITE, TELEPHONE & E-MAIL NAME,TELEPHONE, REPORT NUMBER)
ETC. AND NAME OF AUTHORIZED

CONDUITS, FITTINGS & ACCESSSORIES

6. 3
PVC Conduits & Fittings for Underground Cables Applicable Standards: 23-TMSS-01

ISAM M. KHAIRY KABBANI & National Marketing Est. Type DB, EB, and EPC-40-PVC Type tests PQ Letter:
INSULATION FACTORY COMPANY Co. Ltd. Conduits (NAMCODUCT) conducted at ACES Based on S&SD letter #MPQ4561946-Class IV(b)
Saudi Arabia P. O. Box 16375, Jeddah (Arab Company for -2018_Class I(b) dated April 05, 2022, ISAM M.
21464. Kingdom of Saudi Laboratories & Soil), KHAIRY KABBANI & INSULATION FACTORY
Plant -Dammam 2nd industrial City Arabia. Jeddah, Saudi COMPANY – is pre-qualified for PVC Conduits
0 50 365 1754 Arabia dated August and Fittings for underground Cables as
Street No 95, 7202- Unit No. 3520, Ad [email protected] 19, August 21, conforming to National Grid SA specification
Dammam 34332-2770 m October 19 and 23-TMSS-01, Rev.01, with the following
November 17, 2021 conditions:
Dammam
WARRANTY:
Contact Person - MR. Omar Al-Sasa, Ten (10) year Extended Warranty as confirmed,
Mr. Mahmoud Awwad/ through letter # Nil, dated 06/03/2022 shall be
Phone - +966 138342544,+966 13 892 applicable for all supplies made by M/S ISAM M.
3543 KHAIRY KABBANI & INSULATION FACTORY
Email ID - COMPANY, DAMMAM, KSA
[email protected]
Contact Person Email ID -
[email protected],
[email protected]
Website - www.ikkgroup.com

6. 3 Page 1 of 2
Connection of Al-Nazeem S/S 8271 with 132kv Network in Riyadh City
PTS#22CC1143 & Contract Number:. 4400019349

PVC CONDUIT & FITTINGS

Technical Data Schedule Siz-8" or 200mm
4400019349
22CC1143
Connection of Al-Nazeem S/S 8271 with 132kv Network in Riyadh
City.

EPC-40-PVC
8"= 200mm
8.18mm
 TDP
RIYADH, KSA

Mahmoud Abo El-Hagag

04/12/2023
 National Marketing Est. Co. Ltd. www.namat.com

product markings, Material properties

& characteristics
NAMCODUCT® conduit pipes and fittings meet the having high anti-current puncture proof and lower
requirements prescribed by the following standards thermal conductivity than that of metals.
organisations: SASO, BS, NEMA and ASTM.
The products are also impact resistant, moisture proof,
Our PVC pipe conduit range in straight runs of 2.9, acids and alkalis-resistant and rust-free. Since PVC
3, 6 meters are marked with standards specification conduit pipes have no smell to attract rodents, it does
requirements, logo, product name, standard, schedule/ not cause any kind of biotic attacks.
class, country of origin, manufacturer name, and a
unique batch number that ensures traceability tracking Easy to install and maintain with complete range of
and quality control. solvent cement fabricated electrical fittings, light in
weight with a specific weight which is about one fifth
Some of the product characteristics are as of the steel pipe, resulting in a drop-down on the
follows: transportation cost, and facilitating pipes installation.
NAMCODUCT® products are non-flame propagating,
combustion proof with good insulation properties
Table 01

General Properties Test Method (ASTM) Unit Value

Mechanical Properties
PSI 7,000
Tensile Strength D - 638 / type1
MPA > 48.0
PSI 500,000
Modulus of Elasticity in Tension D - 639 / type1
MPA >3447.0
PSI 14,500
Flexural Strength D - 790 proc. B
MPA 93
Izod Impact D - 256 Ft-Lbs / In of notch 0.65
Hardness (Rockwell) D - 785 Rockwell "R" 119

Thermal Properties
D - 696 in/in/°F 3.0X10-5
Coefficient of Thermal Linear Expansion
D - 696 mm/mm/°C 5.4X10-5
Vicat Softening Point D - 1525 (Rate A) °C > 80
Heat Deflection D - 648 (264 psi) °C (°F) > 70 (158)

Electrical Properties
Dielectric Strength D - 150 Volts/Mil 1413
Dielectric Constant D - 150 60cps at 30 °C 3.7
Volume Resistivity D - 257 Ohm/cm at 95 °C 1.2 X 1012

Flammability Properties
Flammability rating UL - 94/0.062 Rating V-0
Flame Spread ASTM E84 10
Smoke Developed ASTM E84 250
Limiting Oxygen Index UL 94 43%
Burning Rate Self Extinguishing

2
NAMCODUCT®
Conduits, tubings & Ducts
SASO & british standard
SASO GSO IEC 61386-21/2014 & bs-en-61386 pipes Table 02

Light Gauge Medium Gauge Heavy Gauge

Pipe Size Min. Min. Min.

Wall Thickness Wall Thickness Wall Thickness
Inside Dia. Inside Dia. Inside Dia.
mm mm mm mm mm mm

16 1.10 13.4 1.40 12.8 1.60 12.4

20 1.20 17.2 1.60 16.5 1.80 16.0
25 1.40 21.7 1.80 20.9 1.90 20.7
32 1.50 28.5 2.10 27.3 2.50 26.5
38 1.50 34.5 2.20 33.1 2.50 32.5
50 1.90 45.6 2.50 44.4 3.20 43.0

NAMCODUCT® Conduits are offered in 2.9 meters long and black/ white color
Note: Previously BS6099

AMERICAN STANDARD
nema tc-2
Electrical Plastic Tubing (EPT) & Conduit (EPC-40 & EPC-80)
Dimensions of Electrical Plastic Tubing
Table 03
EPT-A-PVC EPC-40-PVC EPC-80-PVC
Trade Metric Outside
Size Size Diameter Min. Wall Min. Inside Min. Wall Min. Inside Min.Wall Min. Inside
Thickness Diameter Thickness Diameter Thickness Diameter
inch mm inch mm mm mm mm mm mm mm

1/2" 16 0.840 21.34 1.52 17.17 2.77 14.68 3.73 12.75

3/4" 21 1.050 26.67 1.52 22.50 2.87 19.81 3.91 17.72
1" 27 1.315 33.40 1.52 29.21 3.38 25.50 4.55 23.11
1 1/4" 35 1.660 42.16 1.78 37.46 3.56 33.90 4.85 31.16
1 1/2" 41 1.900 48.26 2.03 43.02 3.68 39.72 5.08 36.72
2" 53 2.375 60.32 2.54 54.07 3.91 51.33 5.54 47.77
2 1/2" 63 2.875 73.02 2.79 66.24 5.16 61.31 7.01 57.15
3" 78 3.500 88.90 3.18 81.33 5.49 76.40 7.62 71.62
4" 103 4.500 114.30 3.81 105.43 6.02 100.60 8.56 94.91
5" 129 5.563 141.30 – – 6.55 126.36 9.52 119.71
6" 155 6.625 168.28 – – 7.11 152.04 10.97 143.40
8" 200 8.625 219.00 – – 8.18 199.39 12.70 189.48

The above table confirms to SEC Specification 23 - TMSS 01 Table 03 (EPC 40).
EPT-A-PVC Electrical Plastic Tubing for encasement in concrete, EPC 40 Electrical Plastic Conduit for normal duty
application & EPC 80 Electrical Plastic Conduit for heavy-duty application
Note: Pipe Length: Standard 3 / 6 meters

www.namat.com 3
Connection of Al-Nazeem S/S 8271 with 132kv Network in Riyadh City
PTS#22CC1143 & Contract Number:. 4400019349

compliance Statement
Project Title: Connection of Al-Nazeem S/S 8271 with 132kv Network in Riyadh City.
Contract No: 4400019349

22CC1143
 TDP
RIYADH, KSA

Mahmoud Abo El-Hagag

4/8/2023 04/12/2023
Connection of Al-Nazeem S/S 8271 with 132kv Network in Riyadh City
PTS#22CC1143 & Contract Number:. 4400019349

Manufacturer Responsibility Statement

Project Title: Connection of Al-Nazeem S/S 8271 with 132kv Network in Riyadh City.
Contract No: 4400019349 & PTS#22CC1143

TDP
RIYADH, KSA

Mahmoud Abo El-Hagag

4/8/2023
04/12/2023
Connection of Al-Nazeem S/S 8271 with 132kv Network in Riyadh City
PTS#22CC1143 & Contract Number:. 4400019349

Technical Data Schedule Size-6" or 155mm

4400019349
22CC1143
Connection of Al-Nazeem S/S 8271 with 132kv network in Riyadh
City.

EPC-40-PVC
6"= 155mm
7.11mm
 TDP
RIYADH, KSA

Mahmoud Abo El-Hagag

04/12/2023
 National Marketing Est. Co. Ltd. www.namat.com

product markings, Material properties

& characteristics
NAMCODUCT® conduit pipes and fittings meet the having high anti-current puncture proof and lower
requirements prescribed by the following standards thermal conductivity than that of metals.
organisations: SASO, BS, NEMA and ASTM.
The products are also impact resistant, moisture proof,
Our PVC pipe conduit range in straight runs of 2.9, acids and alkalis-resistant and rust-free. Since PVC
3, 6 meters are marked with standards specification conduit pipes have no smell to attract rodents, it does
requirements, logo, product name, standard, schedule/ not cause any kind of biotic attacks.
class, country of origin, manufacturer name, and a
unique batch number that ensures traceability tracking Easy to install and maintain with complete range of
and quality control. solvent cement fabricated electrical fittings, light in
weight with a specific weight which is about one fifth
Some of the product characteristics are as of the steel pipe, resulting in a drop-down on the
follows: transportation cost, and facilitating pipes installation.
NAMCODUCT® products are non-flame propagating,
combustion proof with good insulation properties
Table 01

General Properties Test Method (ASTM) Unit Value

Mechanical Properties
PSI 7,000
Tensile Strength D - 638 / type1
MPA > 48.0
PSI 500,000
Modulus of Elasticity in Tension D - 639 / type1
MPA >3447.0
PSI 14,500
Flexural Strength D - 790 proc. B
MPA 93
Izod Impact D - 256 Ft-Lbs / In of notch 0.65
Hardness (Rockwell) D - 785 Rockwell "R" 119

Thermal Properties
D - 696 in/in/°F 3.0X10-5
Coefficient of Thermal Linear Expansion
D - 696 mm/mm/°C 5.4X10-5
Vicat Softening Point D - 1525 (Rate A) °C > 80
Heat Deflection D - 648 (264 psi) °C (°F) > 70 (158)

Electrical Properties
Dielectric Strength D - 150 Volts/Mil 1413
Dielectric Constant D - 150 60cps at 30 °C 3.7
Volume Resistivity D - 257 Ohm/cm at 95 °C 1.2 X 1012

Flammability Properties
Flammability rating UL - 94/0.062 Rating V-0
Flame Spread ASTM E84 10
Smoke Developed ASTM E84 250
Limiting Oxygen Index UL 94 43%
Burning Rate Self Extinguishing

2
NAMCODUCT®
Conduits, tubings & Ducts
SASO & british standard
SASO GSO IEC 61386-21/2014 & bs-en-61386 pipes Table 02

Light Gauge Medium Gauge Heavy Gauge

Pipe Size Min. Min. Min.

Wall Thickness Wall Thickness Wall Thickness
Inside Dia. Inside Dia. Inside Dia.
mm mm mm mm mm mm

16 1.10 13.4 1.40 12.8 1.60 12.4

20 1.20 17.2 1.60 16.5 1.80 16.0
25 1.40 21.7 1.80 20.9 1.90 20.7
32 1.50 28.5 2.10 27.3 2.50 26.5
38 1.50 34.5 2.20 33.1 2.50 32.5
50 1.90 45.6 2.50 44.4 3.20 43.0

NAMCODUCT® Conduits are offered in 2.9 meters long and black/ white color
Note: Previously BS6099

AMERICAN STANDARD
nema tc-2
Electrical Plastic Tubing (EPT) & Conduit (EPC-40 & EPC-80)
Dimensions of Electrical Plastic Tubing
Table 03
EPT-A-PVC EPC-40-PVC EPC-80-PVC
Trade Metric Outside
Size Size Diameter Min. Wall Min. Inside Min. Wall Min. Inside Min.Wall Min. Inside
Thickness Diameter Thickness Diameter Thickness Diameter
inch mm inch mm mm mm mm mm mm mm

1/2" 16 0.840 21.34 1.52 17.17 2.77 14.68 3.73 12.75

3/4" 21 1.050 26.67 1.52 22.50 2.87 19.81 3.91 17.72
1" 27 1.315 33.40 1.52 29.21 3.38 25.50 4.55 23.11
1 1/4" 35 1.660 42.16 1.78 37.46 3.56 33.90 4.85 31.16
1 1/2" 41 1.900 48.26 2.03 43.02 3.68 39.72 5.08 36.72
2" 53 2.375 60.32 2.54 54.07 3.91 51.33 5.54 47.77
2 1/2" 63 2.875 73.02 2.79 66.24 5.16 61.31 7.01 57.15
3" 78 3.500 88.90 3.18 81.33 5.49 76.40 7.62 71.62
4" 103 4.500 114.30 3.81 105.43 6.02 100.60 8.56 94.91
5" 129 5.563 141.30 – – 6.55 126.36 9.52 119.71
6" 155 6.625 168.28 – – 7.11 152.04 10.97 143.40
8" 200 8.625 219.00 – – 8.18 199.39 12.70 189.48

The above table confirms to SEC Specification 23 - TMSS 01 Table 03 (EPC 40).
EPT-A-PVC Electrical Plastic Tubing for encasement in concrete, EPC 40 Electrical Plastic Conduit for normal duty
application & EPC 80 Electrical Plastic Conduit for heavy-duty application
Note: Pipe Length: Standard 3 / 6 meters

www.namat.com 3
Connection of Al-Nazeem S/S 8271 with 132kv Network in Riyadh City
PTS#22CC1143 & Contract Number:. 4400019349

compliance Statement
Project Title: Connection of Al-Nazeem S/S 8271 with 132kv Network in Riyadh City.
Contract No: 4400019349

22CC1143
 TDP
RIYADH, KSA

Mahmoud Abo El-Hagag

4/8/2023 04/12/2023
Connection of Al-Nazeem S/S 8271 with 132kv Network in Riyadh City
PTS#22CC1143 & Contract Number:. 4400019349

Manufacturer Responsibility Statement

Project Title: Connection of Al-Nazeem S/S 8271 with 132kv Network in Riyadh City.
Contract No: 4400019349 & PTS#22CC1143

TDP
RIYADH, KSA

Mahmoud Abo El-Hagag

4/8/2023 04/12/2023
Connection of Al-Nazeem S/S 8271 with 132kv Network in Riyadh City
PTS#22CC1143 & Contract Number:. 4400019349

Approved TDS for HV Power Cable

PROJECT TITLE : CONNECTION OF AL NAZEEM S/S 8271, with 132kV /
1200mm2 Network, In Riyadh City.
CONTRACT NO.: 4400019349 PTS NO.: 22CC1143

1. Technical Data Sheet

Trading & Development Partnership (TDP)

P.O.Box. 1327 Riyadh 11431 K.S.A. Tel: 01-281-2222 Fax: 01-488-9035
E-mail: [email protected] - Web: www.tdpco.com
 [PPð&8;/3(/$7+'3(132N9&DEOH

7.0 DATA SCHEDULE

7.1 110kV/115kV/132kV, XLPE POWER CABLE (1200,2000,2500 mm²)

National Grid SA Enquiry Date:

No.
National Grid SA Purchase Date:
CN # 4400019349
Order No.
or Contract No.
PTS#22CC1143 / CONNECTION OF AL NAZEEM S/S 8271,
National Grid SA PTS No./Project Title with with 132kV/1200mm2 Network – In Riyadh City
J.O. No.
REFERENCE
SECTION NO. DESCRIPTION 'A' 'B' 'C'

3.0 APPLICABLE CODES AND STANDARDS

AEIC CS9/IEC &DEOHVKDOOEHPDQXIDFWXUHGDVSHU$(,&&6
Reference Manufacturing Standard 60840 WHVWHGDVSHU,(&

4.0 DESIGN AND CONSTRUCTION REQUIREMENTS

4.1 Design Criteria/Rating

a. Cable Nominal Voltage, kV 110/115/132 32

b. System Short Circuit Current, kA 40 
c. Maximum conductor short circuit current
250 
temperature, °C
4.2 d. Normal Continuous Loading
 Maximum permissible continuous 90 
conductor temperature, °C
ā Permissible Load in Amps, A * $PSV
e. Emergency Loading
ā Maximum emergency conductor loading
105 
temp,°C
ā Permissible Load in Amps, A * 5HIHUWR&ODXVHG 3DJH

ā Allowable loading duration; hrs

i) During any 12 months 72 
ii) During the life of the cable 2160 

4.3 Material Details :

4.3.1 Conductor :
Material Copper &RSSHU

'A' - NATIONAL GRID SA SPECIFIED DATA/PARAMETERS

'B' - BIDDER/SUPPLIER/VENDOR/CONTRACTOR PROPOSED DATA/PARAMETERS
'C' - REMARKS SUPPORTING THE PROPOSED DEVIATION IN COLUMN 'B'
(*) - DATA/PARAMETER TO BE PROVIDED/PROPOSED BY THE BIDDER/SUPPLIER/ VENDOR /
CONTRACTOR IN COLUMN 'B'

11TMSS02R02/HKG Date of Approval: January 02, 2018 Page 19 of 42

.
 [PPð&8;/3(/$7+'3(132N9&DEOH

7.0 DATA SCHEDULE

7.1 110kV/115kV/132kV, XLPE POWER CABLE (1200,2000,2500 mm²)

REFERENCE
SECTION NO. DESCRIPTION 'A' 'B' 'C'

Conductor for stranding

(Segmental) *  6HJPHQWDO

No. of strands * 5x61 + 1x19

Dia. of strand prior to compaction, mm * 2.32 / 2.08

Cross-sectional area, mm²

(1200, 2000 or 2500) 
1200 mm²: 45.0
2000 mm²: 56.0
Maximum Diameter, mm 2500 mm²: 62.0  (Approximate)

Resistance at 25°C, Ω/km *  '&5HVLVWDQFH

Conductor AC resistance at 20°C * 

Conductor DC resistance at 20°C * 

Temp. coefficient at 20°C/°C * 

Skin effect loss factor (ks) * 

Proximity effect loss factor (kρ) * 

DC resistance at 90°C, Ω/km * 

Short circuit capability of conductor in kA for 1

second starting with 90°C conductor temperature up 40 
to max. short circuit current temperature

:DWHU6ZHOODEOH7DSHV%HWZHHQ
Water blocking material between strands * 6WUDQGV/D\HUV
Semi-Conducting 6HPL&RQGXFWLQJ
Conductor Moisture Impervious layer Material Tape 7DSH

4.3.2 Conductor shield:

Material SEMICON 6(0,&21

Average thickness, mm
1200, 2000, 2500 mm² 1.50 

Minimum thickness, mm
1200, 2000, 2500 mm² 1.35 

Dia. over conductor shield, mm *  $SSUR[LPDWH

Thermal resistivity, K.m/W * 

11TMSS02R02/HKG Date of Approval: January 02, 2018 Page 20 of 42

.
 [PPð&8;/3(/$7+'3(132N9&DEOH

7.0 DATA SCHEDULE

7.1 110kV/115kV/132kV, XLPE POWER CABLE (1200,2000,2500 mm²)

REFERENCE
SECTION NO. DESCRIPTION 'A' 'B' 'C'

4.3.3 Insulation:
SUPER CLEAN 683(5&/($1
Material XLPE ;/3(
Nominal thickness, mm 18.0 
Minimum thickness, mm 16.2 
Diameter over insulation, mm * 
Thermal resistivity, K.m/W * 
Relative permittivity or
* 
dielectric constant (ε)
Loss factor (δ ) * 
Specific Resistance, MΩ-km
* 
(Actual Test Value)

4.3.4 Insulation shield:

Material SEMICON 6(0,&21
Average thickness, mm 1.50 
Minimumn thickness, mm 1.35 
Diameter over insulation shield, mm *  $SSUR[LPDWH
Thermal resistivity, K.m/W * 

Copper wire + Copper tape

Lead Sheath &RSSHU:LUHV
Combination of Copper wire  &RSSHU7DSH
4.3.5 Metallic shield: Copper tape and Lead Sheath. 2SHQ+HOL[
Material Smooth Aluminum Sheath
Copper wire + Copper tape:
261 mm² (CUW only)
Lead Sheath, Combination of
Total effective cross-sectional area mm² Copper wire + Copper tape 
and Lead Sheath & Smooth
Aluminum Sheath: based on
short circuit calculations
Diameter over metallic shield, mm *  $SSUR[LPDWH
Temp. coefficient at 20°C,/°C * 
DC resistance at 20°C, Ω/km * 
AC resistance at 20°C Ω/km * 
Self inductance, mH/km * 
AC resistance at 90°C 
DC resistance at 90°C 
Resistivity at 20°C [ >ŸP@
Short circuit capability in kA for 1 second of the
metallic shield starting with 90°C 40 
conductor temperature :

68%-(&772$0$18)$&785,1*72/(5(1&(2)>PP@

11TMSS02R02/HKG Date of Approval: January 02, 2018 Page 21 of 42

.
 [PPð&8;/3(/$7+'3(132N9&DEOH

7.0 DATA SCHEDULE

7.1 110kV/115kV/132kV, XLPE POWER CABLE (1200,2000,2500 mm²)

REFERENCE
SECTION NO. DESCRIPTION 'A' 'B' 'C'

4.3.6 Moisture impervious layer (first layer):

SEMI-CONDUCTIVE 6(0,&21'8&7,9(
Material SWELLING TAPE 6:(//,1*7$3(

Thickness, mm 0.25  $SSUR[LPDWH

Diameter over the layer, mm *  $SSUR[LPDWH

Moisture impervious layer (second layer): SEMI-CONDUCTIVE 6(0,&21'8&7,9(

Material SWELLING TAPE 6:(//,1*7$3(

Thickness, mm 0.25  $SSUR[LPDWH

Diameter over the layer, mm *  $SSUR[LPDWH

Third Moisture impervious layer Yes/No <HV /DPLQDWHG$/7DSH

4.3.7 Jacket:
Material HDPE +'3(
Nominal thickness, mm 4.50 
Minimum thickness, mm 4.05 
Overall cable diameter, mm *  (Approximate)

4.3.8 Conductive layer :

Material * *UDSKLWH
Thickness, mm *  (Approximate)

5.4 Special Thermal Short Circuit Test Yes <HV

Special By-Product of XLPE Yes <HV
Special Test for Smooth Aluminum Sheath Yes/No 1R

6.0 PACKING
a. Total quantity required, m As per B.O.Q.
b. Are matched sets of cable reel length
required? Please refer to our Commercial offer.
b. If "YES", how many reels are
required per set? Please refer to our Commercial offer.
c. Tolerance in cable length of
matched reel sets Please refer to our Commercial offer.
e. Conductor weight, kg/km *  (Approximate)
f. Cable weight, kg/km *  (Approximate)
g. Reel and cable weight, kg *  (Approximate)
h. Cable length per reel, m *  ц5%
i. Cable reel diameter, mm *  (Approximate)
j. Cable reel width, mm *  (Approximate)

11TMSS02R02/HKG Date of Approval: January 02, 2018 Page 22 of 42

.
 [PPð&8;/3(/$7+'3(132N9&DEOH

7.0 DATA SCHEDULE

7.1 110kV/115kV/132kV, XLPE POWER CABLE (1200,2000,2500 mm²)

REFERENCE
SECTION NO. DESCRIPTION 'A' 'B' 'C'

OTHER REQUIRED INFORMATION

a. Life expectancy of cable, years Over 30 2YHU

b. 3-phase inductance in trefoil/ flat formation,  (Trefoil)

*
mH/km  (Flat)

c. 3phase capacitance in trefoil/ flat formation

μF/km * 
,/RDG $PSV
d. Maximum permissible overload in % of 3
cables in underground cable duct trefoil/
,KRXU,KRXUV ,KRXU,KRXUV
flat formation, at 40°C soil temperature,
,KRXUV ,KRXUV
for 1/2/3(I1-hour/ I2-hours/I3-hours) hours
starting with a prior loading of
50% *  
 
75% 
100% 

e. Maximum pulling Tension (kN) * 

f. Maximum sidewall pressure, kN/m * 

g. Minimum bending radius, mm * 

* Based on the standard trench of a single circuit in flat formation in a backfill duct bank at 1.45 m depth with 400 mm
axial phase spacing, 40 ºC soil temperature, 2 ºC.m/W soil thermal resistivity (dry value), 1.2 ºC.m/W thermal backfill
resistivity (dry value) and cross bonded system.

11TMSS02R02/HKG Date of Approval: January 02, 2018 Page 23 of 42

.
 [PPð&8;/3(/$7+'3(132N9&DEOH

7.0 DATA SCHEDULE

7.1 110kV/115kV/132kV, XLPE POWER CABLE (1200,2000,2500 mm²)

A. ADDITIONAL TECHNICAL INFORMATION OR FEATURES TO BE FURNISHED BY NATIONAL

GRID SA:

B. ADDITIONAL SUPPLEMENTARY DATA OR FEATURES PROPOSED BY

BIDDER/VENDOR/SUPPLIER/CONTRACTOR:

C. OTHER PARTICULARS TO BE FILLED UP BY BIDDER/VENDOR/SUPPLIER/ CONTRACTOR:

Actual Manufacturer Vendor/Supplier/

of Equipment/Material Contractor

Name of the Company 5L\DGK&DEOHV&R

TDP
Location and address 1HZ,QGXVWULDO&LW\ RIYADH, KSA
32%R[5L\DGK
.6$

Name and Signature of (QJU0RKDPPDG$O6KPRXU\

authorized representative *07HFKQLFDO'HSDUWPHQW Boyet Panitan
and date 08/11/2023

Official Seal/Stamp
of the Company & Date

11TMSS02R02/HKG Date of Approval: January 02,

02 2018 Page 24 of 42

.
PROJECT TITLE : CONNECTION OF AL NAZEEM S/S 8271, with 132kV /
1200mm2 Network, In Riyadh City.
CONTRACT NO.: 4400019349 PTS NO.: 22CC1143

Cross-Sectional Drawings for

1*1200mm2-132kv Cable

Trading & Development Partnership (TDP)

P.O.Box. 1327 Riyadh 11431 K.S.A. Tel: 01-281-2222 Fax: 01-488-9035
E-mail: [email protected] - Web: www.tdpco.com
 TYPICAL CROSS-SECTIONAL DRAWING FOR Riyadh Cables Group Co.
1x1200/261 mm² CU/XLPE/LAT/HDPE - 132 kV Cable Technical Department

REFERENCE STANDARD: IEC 60840 & 11-TMSS-02 Rev.02

1. Conductor : Copper , Segmental

Approximate diameter : 44.5 mm
2. Conductor Moisture Impervious layer: Semi-Conducting Water Swellable Tape
Approximate thickness : 0.25 mm / Approximate diameter : 46.5 mm
3. Conductor Screen: Extruded Semi-conducting Thermosetting Compound
Average thickness : 1.50 mm / Approximate diameter : 49.5 mm
4. Insulation: Extruded Cross-linked Polyethylene (XLPE)
Nominal thickness : 18.00 mm / Approximate diameter : 85.5 mm *
5. Insulation Screen: Extruded Semi-conducting Thermosetting Compound
Average thickness : 1.50 mm / Approximate diameter : 88.5 mm
6. Bedding Tape : First Water Swellable Tape
Approximate thickness : 0.25 mm / Approximate diameter : 89.5 mm
7. Metallic Screen: Copper Wires + Copper Tape (Open Helix)
Nominal cross-section : 261 mm ² / Approximate diameter : 93.3 mm
8. Longitudinal Moisture Barrier: Second Water Swellable Tape
Approximate thickness : 0.25 mm / Approximate diameter : 94.3 mm
9. Radial Moisture Barrier: Laminated Aluminum Tape
Nominal thickness : 0.20 mm / Approximate diameter : 94.9 mm
10. Outer Sheath: Extruded HDPE (Graphite Coated)
Nominal thickness : 4.5 mm Approximate Overall Diameter : 105 mm

* SUBJECT TO A MANUFACTURING TOLERENCE OF [-2.0, +2.0 mm]

DWG No.: NGSA-1200-132-CW-2020

Prepared By: A.Darweesh NG
Reviewed By: M Shmoury
4/3/2018 Approved By: Dr. N. Al-Saati Page 1 of 1
Connection of Al-Nazeem S/S 8271 with 132kv Network in Riyadh City
PTS#22CC1143 & Contract Number:. 4400019349

Compliance Statement Clause by Clause

Date of Approval: May 26, 2015
TRANSMISSION MATERIALS STANDARD SPECIFICATION 23-TMSS-01, Rev.01

TABLE OF CONTENTS

1.0 SCOPE

2.0 CROSS REFERENCES

3.0 APPLICABLE CODES AND STANDARDS

4.0 DESIGN AND CONSTRUCTION REQUIREMENTS

4.1 General
4.2 Design Criteria
4.3 Rating
4.4 Material
4.5 Fabrication
4.6 Dimensions and Sizes

5.0 MARKINGS

6.0 TESTS

6.0 DATA SCHEDULE

23TMSS01R01/DBA Date of Approval: May 26, 2015 PAGE 2 OF 24

TRANSMISSION MATERIALS STANDARD SPECIFICATION 23-TMSS-01, Rev.01

LIST OF FIGURES

FIGURE NO.: DESCRIPTION

1. Integral Belled-End Conduits

2. Straight Couplings

3. 5-Degree Couplings

4. 5-Degree Bends/Elbows

5. 45, 90 Degree Bends/Elbows for EPC-40-PVC Type Conduits

6. 45, 90 Degree Bends/Elbows for EB, DB Type Conduits

7. Bell-End Coupling

8. Fitting Plugs

9. Male Terminal Adapters

10. Female Terminal Adapters

11. Flat Caps

12. PVC Corrugated Flexible Tubing

23TMSS01R01/DBA Date of Approval: May 26, 2015 PAGE 3 OF 24

TRANSMISSION MATERIALS STANDARD SPECIFICATION 23-TMSS-01, Rev.01

1.0 SCOPE

This Transmission Material Standard Specification (TMSS) specifies the minimum

technical requirements for design, engineering, manufacture, inspection, testing and
performance of PVC Conduits and Fittings intended to be used in the underground cables
system of National Grid Saudi Arabia.

2.0 CROSS-REFERENCES

This Material Standard Specification shall be read in conjunction with the latest revision of
National Grid Saudi Arabia General Specification No. 01-TMSS-01, titled "General
Requirements for All Transmission Equipment/Materials" which shall be considered as an
integral part of this TMSS.

This TMSS shall also be read in conjunction with National Grid Saudi Arabia Purchase
Order or Contract Schedules for project, as applicable.

3.0 APPLICABLE CODES AND STANDARDS

The latest amendments/revision of the following Code and Standard shall be applicable for
the equipment/material covered in this TMSS. In case of conflict, the vendor/manufacturer
may propose equipment/material conforming to Industry Code and Standard other than that
quoted hereunder without jeopardizing the requirements of this TMSS.

3.1 ASTM D1784 Standard Specification for Rigid Poly (Vinyl Chloride)
(PVC) Compounds and Chlorinated Poly (Vinyl Chloride
(CPVC) Compounds

3.2 ASTM D2564 Standard Specification for Solvent Cements for Poly Vinyl
Chloride (PVC) Plastic Piping Systems.

3.3 ASTM D4396 Standard Specification for Rigid Poly (Vinyl Chloride) (PVC)
and Chlorinated Poly (Vinyl Chloride) (CPVC) Compounds
for Plastic Pipe and Fittings Used in Non-pressure
Applications.

3.4 ASTM F402 Standard Practice for Safe Handling of Solvent Cements,
Primers, and Cleaners Used for Joining Thermoplastic Pipe
and Fittings.

3.5 ASTM F656 Standard Specification for Primers for Use in Solvent
Cements Joints of Poly(Vinyl Chloride) (PVC) Plastic Pipe
and Fittings.

3.6 NEMA TC 2 Electrical Polyvinyl Chloride (PVC) Conduit.

23TMSS01R01/DBA Date of Approval: May 26, 2015 PAGE 4 OF 24

TRANSMISSION MATERIALS STANDARD SPECIFICATION 23-TMSS-01, Rev.01

3.7 NEMA TC 3 Polyvinyl Chloride (PVC) Fittings for Use with Rigid PVC
Conduit and Tubing.

3.8 NEMA TC 6 and 8 Polyvinyl Chloride (PVC) Plastic Utilities for Underground
Installations.

3.9 NEMA TC 9 Fittings for Polyvinyl Chloride (PVC) Plastic Utilities Duct
for Underground Installation.

3.10 UL 651 UL Standard for Safety Schedule 40, 80, Type EB and A
Rigid PVC Conduit and Fittings

4.0 DESIGN AND CONSTRUCTION REQUIREMENTS

4.1 General

4.1.1 The PVC conduits and fittings shall be of manufacturer’s standard design and
shall meet or exceed the requirements of this specification in all respects.

4.1.2 The manufacturer’s design drawings, as required in 01-TMSS-01, shall show

the outline of the PVC conduits and fittings together with all pertinent
dimensions. Any variations in these dimensions due to manufacturing
tolerances shall be indicated.

4.2 Design Criteria

4.2.1 A maximum soil ambient temperature of 40ºC shall be regarded as the basic
temperature with service conditions referenced in 01-TMSS-01.

4.2.2 The types of extra-strength rigid plastic utility duct for installation of
underground communication and electrical wire and cable shall be as
follows:

a. Type DB: PVC conduit and fitting designed for direct burial in
underground trenches without requirement for
encasement in concrete.

b. Type EB: PVC conduit and fitting designed for encased burial
in concrete inside or outside buildings and substations.

c. Type EPC-40-PVC: Electrical PVC conduit designed for normal-duty

applications and also used for all concrete encased applications or
direct burial.

d. PVC corrugated flexible tubing: Underground mechanical protection

for (Sub-duct) communication Fiber Optic Cable Installations and
Optic Cable applications.

23TMSS01R01/DBA Date of Approval: May 26, 2015 PAGE 5 OF 24

TRANSMISSION MATERIALS STANDARD SPECIFICATION 23-TMSS-01, Rev.01

4.3 Rating

4.3.1 Rated voltage of the power cables shall be 69 kV, 110 kV, 115 kV, 132 kV,
230 kV or 380 kV.

4.3.2 PVC conduits and fittings shall withstand the continuous operating
temperature of the power cables at 90ºC as per UL 651.

4.3.3 PVC conduits and fittings shall withstand the maximum emergency
conductor overloading temperature mentioned in National Grid Saudi Arabia
material specification # 11-TMSS-02, Rev.01 clause# 4.2.3 (for 1500 hours
during the life of cable).

4.3.4 PVC conduits and fittings rating data shall be as specified in Table 1 and 2,
respectively.

4.4 Material

4.4.1 Plastic conduits shall be made from rigid PVC plastic compound that meets
the minimum cell classification of PVC 12154 as defined in ASTM D4396
and shown in Table 1.

Table 1: Classification of plastic conduits

Designation
Property and Unit Cell Limits
Order No.
1 Kind of resin in compound PVC
2 Impact resistance (J/m of notch) >80.1
3 Tensile strength (MPa) 21.0 to 27.5
4 Modulus of Elasticity in tension (MPa) 3585 to 4275
5 Deflection temperature under load of 1.82 MPa 100 to 110
(ºC)
4.4.2 Plastic fittings shall be made from rigid PVC plastic compound that meets the
minimum cell classification of PVC 11232 as defined in ASTM D4396 and
shown in Table 2.

Table 2: Classification of plastic fittings

Designation
Property and Unit Cell Limits
Order No.
1 Kind of resin in compound PVC
2 Impact resistance (J/m of notch) >40.0
3 Tensile strength (MPa) 27.5 to 34.4
4 Modulus of Elasticity in tension (MPa) 2620 to 3171
5 Deflection temperature under load of 1.82 MPa 70 to 80
(ºC)
4.4.3 Color

PVC ducts shall be gray in color.

23TMSS01R01/DBA Date of Approval: May 26, 2015 PAGE 6 OF 24

TRANSMISSION MATERIALS STANDARD SPECIFICATION 23-TMSS-01, Rev.01

4.4.4 Solvent Cements and Primers

PVC solvent-cements shall be in accordance with ASTM D2564 or as

specified by the manufacturer. PVC primers shall be in accordance
with ASTM F656 or as specified by the manufacturer. ASTM F 402 is
referenced as recommended practice for safe handling of solvent cements.

4.4.5 Joints

Joints shall be made with either fittings or integral belled ends. The
PVC solvent-cemented type joining system shall be used.

The wall thickness of an integral bell shall be considered satisfactory if

formed from duct meeting the requirements of this standard. Belled-ends
shall be centered to provide a visible shoulder around the entire
circumference of the duct.

4.4.6 PVC corrugated flexible tubing (sub-duct) for communication Fiber

Optic Cable application shall meet the following requirements:

a. PVC shall be plastic corrugated tube of orange color. The

dimensions shall be as per table 25 (see figure 12).

b. Highly flexible tube shall be oil and chemical resistant and

crush resistant.

4.5 Fabrication

4.5.1 PVC plastic conduits and fittings shall be homogeneous throughout and free
from visible cracks, holes , burrs, foreign inclusion, or other defects
that could damage insulated wires or cables.

4.5.2 Overall PVC conduit length including the integral bell or coupling shall
be 6.10m ± 0.03m or (20ft ± 1in).

4.5.3 Dimensions of conduits shall be as per clause 4.6 and dimensions of fittings
shall be as per attached figures 2 to 11 and tables 7 to 24.

4.6 Dimensions and Sizes

4.6.1 The dimensions of each size of conduit shall be in accordance with Tables
3 (as per NEMA TC 2) and Table 4 (as per NEMA TC 6 & 8).

23TMSS01R01/DBA Date of Approval: May 26, 2015 PAGE 7 OF 24

TRANSMISSION MATERIALS STANDARD SPECIFICATION 23-TMSS-01, Rev.01

Table 3: Dimensions of EPC-40-PVC conduit

Minimum
Trade Outside Diameter Wall Minimu
Size Metric (mm) Thickness m Inside
(Inch) Designators (mm) Diameter
Tolerance Type (mm)
Average Max. Min.
on average EPC-40-PVC
¾ 21 26.67 ± 0.10 26.92 26.42 2.87 19.81
1 27 33.40 ± 0.31 33.66 33.15 3.38 25.5
1¼ 35 42.16 ± 0.13 42.47 41.86 3.56 33.90
1½ 41 48.26 ± 0.15 48.56 47.96 3.68 39.72
2 53 60.32 ± 0.15 60.63 60.02 3.91 51.33
2½ 63 73.02 ± 0.18 73.41 72.64 5.16 61.31
3 78 88.90 ±0.20 89.28 88.52 5.49 76.40
3½ 91 101.60 ±0.20 102.87 100.33 5.74 88.54
4 103 114.30 ±0.23 115.57 113.03 6.02 100.60
5 129 141.30 ±0.25 142.57 140.03 6.55 126.36
6 155 168.28 ±0.28 169.54 167.00 7.11 152.04
8 200 219.00 ± 0.38 220.36 217.62 8.18 199.39

Table 4: Dimensions of EB & DB PVC conduit

Minimum Wall
Outside Diameter
Trade Metric Out of Thickness Minimu
(mm)
Size Designators Roundness* (mm) m Inside
(Inch) (mm) Diameter
Type Type (mm)
Tolerance
Average EB DB
on average
PVC PVC
2 53 60.33 ± 0.15 1.52 1.52 1.96 50.80
3 78 88.90 ± 0.20 1.52 1.93 3.00 76.20
3½ 91 101.60 ± 0.20 2.54 2.24 3.45 88.90
4 103 114.30 ± 0.23 2.54 2.54 3.91 101.6
5 129 141.30 ± 0.25 2.54 3.20 4.85 127
6 155 168.28 ± 0.28 2.54 3.86 5.77 152.4
*Out of roundness is defined as maximum diameter minus minimum diameter.

4.6.2 The PVC conduits may have belled ends. Dimension of integral belled-
ends or integral couplings of each size of conduit shall be in accordance
with the Table 5 (as per NEMA TC 2) for EPC-40-PVC type and Table
6 (as per NEMA TC 6 & 8) for EB and DB types. Figure 1 shows the
integral belled- end conduit.

4.6.3 Except for trade sizes, all dimensions in Tables 1 to 25 are in millimeters.

4.6.4 Metal circular Go/No-Go plug machined to the minimum and

maximum inside diameters may be used to check dimension A (Socket

23TMSS01R01/DBA Date of Approval: May 26, 2015 PAGE 8 OF 24

TRANSMISSION MATERIALS STANDARD SPECIFICATION 23-TMSS-01, Rev.01

Entrance) and B (Socket Bottom).

6.10m ± 0.03m or (20ft ± 1in)

B
A

C
Figure 1: Integral Belled-End Conduits

Table 5: Dimensions for EPC-40-PVC type, integral belled-ends or integral couplings

A B C
Trade Min.
Metric Socket Inside Diameter at Socket Inside Diameter at Socket Depth Wall
Size Entrance (mm) Bottom (mm)
Design (mm) thickne
(Inch) 1
ators Average Average
Max. Min. Max. Min. Max. Min. ss
Tolerance Tolerance (mm)
¾ 21 27.03 ± 0.10 27.28 26.77 26.57 ± 0.10 26.82 26.31 38.10 18.26 2.41
1 27 33.78 ± 0.13 34.04 33.53 33.27 ± 0.13 33.53 33.02 47.62 22.22 2.54
1¼ 35 42.60 ± 0.13 42.90 42.30 42.04 ± 0.13 42.34 41.73 50.80 23.83 3.05
1½ 41 48.72 ± 0.15 49.02 48.41 48.11 ± 0.15 48.41 47.80 50.80 26.97 3.05
2 53 60.78 ± 0.15 61.09 60.48 60.17± 0.15 60.48 59.87 50.80 28.58 3.30
2½ 63 73.41 ± 0.18 73.79 73.02 72.85 ± 0.18 73.23 72.47 76.20 37.31 4.19
3 78 89.28 ± 0.20 89.66 88.90 88.70±0.20 89.08 88.32 79.38 40.49 4.55
3½ 91 101.96 ± 0.20 103.25 100.71 101.40±0.20 101.78 101.02 82.55 42.85 4.78
4 103 114.88 ± 0.23 115.95 113.41 114.07±0.23 114.45 113.70 85.73 44.45 5.00
5 129 142.06 ± 0.25 143.33 140.80 141.05±0.25 141.80 140.38 92.08 49.20 5.44
6 155 169.11 ± 0.28 170.38 167.84 168.00±0.28 168.76 167.23 95.25 53.96 5.89
8 200 220.22 ± 0.38 221.62 218.82 218.69 ± 0.38 220.09 217.68 165.10 123.83 6.10
1
Minimum wall thickness indicated shall be applicable at any point of socket.
Table 6: Dimensions for DB and EB type, integral belled-ends or integral couplings
Trade A B C
Metric Tolerance Minimu
Size Out of
Average Socket Average Socket on Inside
(Inch)
Design Roundness* m
ators Inside Diameter Inside Diameter at Diameter Socket
at Entrance mm) Bottom (mm) (mm) (mm)
Depth
2 53 60.96 60.48 ± 0.15 1.52 (mm)
44.45
3 78 89.87 89.10 ± 0.20 1.52 73.03
3½ 91 102.64 101.80 ± 0.20 2.54 79.38
4 103 115.42 114.53 ± 0.23 2.54 85.73
5 129 142.60 141.55 ± 0.25 2.54 101.60
6 155 169.85 168.55 ± 0.28 2.54 127.00
*Out of roundness is defined as maximum diameter minus minimum diameter.

23TMSS01R01/DBA Date of Approval: May 26, 2015 PAGE 9 OF 24

TRANSMISSION MATERIALS STANDARD SPECIFICATION 23-TMSS-01, Rev.01

5.0 MARKINGS

5.1 All required markings shall be legible and so applied as to remain legible
under handling and installation practices.

5.2 The PVC conduit and fitting shall be marked with the following:

a. Manufacturer’s name or trademark.

b. Date of the manufacturing.
c. Trade size of the conduit product.
d. Material: PVC.
e. Type: DB, EB or EPC-40-PVC.
f. The marking letters shall be at least 6 mm high.

5.3 Each shipping box shall be printed with the following information:

a. Conduits and fittings type DB, EB, EPC-40-PVC or PVC corrugated

flexible tubing.
b. Nominal overall diameter and length.
c. Type of material.
d. Manufacturer's name and country of origin.
e. National Grid Saudi Arabia address and order number.
f. National Grid Saudi Arabia stock number in 100 mm high bold numerals.

6.0 TESTS

All test results shall be provided for review and acceptance by National Grid Saudi Arabia.

6.1 The PVC plastic conduits and fittings shall be tested in accordance with NEMA
or equivalent Standards referenced to in this specification.

6.2 Deflection resistance test for EPC-40-PVC Conduit shall be made according to
NEMA TC 2 Table 4-1.

6.3 Impact resistance test for EPC-40-PVC Conduit shall be made according to NEMA
TC 2 Table 4-2 and for EB & DB PVC Conduit shall be made as per NEMA TC 6 &
8 Table 4-1.

6.4 Duct Stiffness test for EB & DB PVC Conduit shall be made according to
NEMA TC 6 & 8 Table 4-2.

6.5 The PVC plastic conduit shall be tested as per UL 651 for 90ºC continuous
operation.

6.6 Resistance to Specific Reagents shall be made for PVC plastic conduits according
to UL 651 Clause 17.

23TMSS01R01/DBA Date of Approval: May 26, 2015 PAGE 10 OF 24

TRANSMISSION MATERIALS STANDARD SPECIFICATION 23-TMSS-01, Rev.01

N C
Figure 2 : Straight Couplings

Table 7: Dimensions for EPC-40-PVC type straight couplings

C E
Socket Depth (mm) Wall N
Trade size Metric Thickness Minimum
(inch) designators Maximum Minimum Minimum1 (mm)
(mm)
¾ 21 38.10 18.26 2.41 2.38
1 27 47.62 22.22 2.54 2.38
1¼ 35 50.80 23.83 3.05 2.38
1½ 41 50.80 26.97 3.05 2.38
2 53 50.80 28.58 3.30 2.38
2½ 63 76.20 37.31 4.19 4.76
3 78 79.38 40.49 5.49 4.76
3½ 91 82.55 42.85 5.74 4.76
4 103 85.73 44.45 6.02 4.76
5 129 92.08 49.20 6.55 4.76
6 155 95.25 53.96 7.11 6.35
8 200 165.10 123.83 - -
1
Minimum wall thickness indicated shall be applicable at any point of socket.

Table 8: Dimensions for DB and EB type straight couplings

C
Trade size Metric M N
(inch) designators Socket Depth Maximum Minimum
Minimum (mm) (mm)
(mm)
2 53 44.45 69.5 2.4
3 78 73.03 100.8 2.8
3½ 91 79.38 114.3 2.8
4 103 85.73 127.8 2.8
5 129 101.60 158.8 3.6
6 155 127.00 190.5 3.6

23TMSS01R01/DBA Date of Approval: May 26, 2015 PAGE 11 OF 24

TRANSMISSION MATERIALS STANDARD SPECIFICATION 23-TMSS-01, Rev.01

5º

C
Figure 3: 5-Degree Couplings
Table 9: Dimensions for EPC-40-PVC type 5-degree couplings

C E
Socket Depth (mm) Wall N
Trade size Metric Thickness Minimum
(inch) designators Minimum 1 (mm)
Maximum Minimum
(mm)
¾ 21 38.10 18.26 2.41 2.38
1 27 47.62 22.22 2.54 2.38
1¼ 35 50.80 23.83 3.05 2.38
1½ 41 50.80 26.97 3.05 2.38
2 53 50.80 28.58 3.30 2.38
2½ 63 76.20 37.31 4.19 4.76
3 78 79.38 40.49 5.49 4.76
3½ 91 82.55 42.85 5.74 4.76
4 103 85.73 44.45 6.02 4.76
5 129 92.08 49.20 6.55 4.76
6 155 95.25 53.96 7.11 6.35
1Minimum
8 wall thickness indicated shall be applicable at any point of socket. -
200 165.10 123.83 -

Table 10 - Dimensions for DB and EB type 5-degree couplings

C
Trade size Metric M N
(inch) designators Socket Depth Maximum Maximum
Minimum (mm) (mm)
(mm)
2 53 44.45 65.1 4.8
3 78 73.03 94.5 5.6
3½ 91 79.38 - -
4 103 85.73 121.8 6.0
5 129 101.60 150.4 10.0
6 155 127.00 178.2 14.3

23TMSS01R01/DBA Date of Approval: May 26, 2015 PAGE 12 OF 24

TRANSMISSION MATERIALS STANDARD SPECIFICATION 23-TMSS-01, Rev.01

M R
C

Figure 4: 5-Degree Bends/Elbows

Table 11: Dimensions for EPC-40-PVC type PVC, 5-degree bends/elbows

C B R
Trade Socket Depth (mm) Wall Thickness Radius
size Metric 1
Minimum of bend
(inch) Designators Maximum Minimum (mm) (mm)
¾ 21 38.10 18.26 2.41 -
1 27 47.62 22.22 2.54 -
1¼ 35 50.80 23.83 3.05 -
1½ 41 50.80 26.97 3.05 -
2 53 50.80 28.58 3.30 -
2½ 63 76.20 37.31 4.19 -
3 78 79.38 40.49 5.49 -
3½ 91 82.55 42.85 5.74 -
4 103 85.73 44.45 6.02 -
5 129 92.08 49.20 6.55 -
6 155 95.25 53.96 7.11 -
8 200 165.10 123.83 - -
1
Minimum wall thickness indicated shall be applicable at any point of socket.

Table 12: Dimensions for DB and EB type PVC 5-degree bends/elbows

C
M
Trade size Metric Socket Depth R
Maximum
(inch) Designators Minimum (mm) (mm)
(mm)
2 53 44.45 69.5 -
3 78 73.03 100.8 -
3½ 91 79.38 114.3 -
4 103 85.73 127.8 1000
5 129 101.60 158.8 -
6 155 127.00 190.5 1500

23TMSS01R01/DBA Date of Approval: May 26, 2015 PAGE 13 OF 24

TRANSMISSION MATERIALS STANDARD SPECIFICATION 23-TMSS-01, Rev.01

Figure 5: 45, 90-Degree Bends/Elbows for EPC-40-PVC Type Conduit

T able 13: Dimensions for EPC-40-PVC type 45, 90-degree bends/elbows

C B
Trade M
Metric Socket Depth (mm) Minimum
size Minimum
Designators Radius (mm)
(inch) Maximum Minimum (mm)
¾ 21 38.10 18.26 114.30 26.77
1 27 47.62 22.22 146.05 33.53
1¼ 35 50.80 23.83 184.15 42.30
1½ 41 50.80 26.97 209.55 48.41
2 53 50.80 28.58 241.30 60.48
2½ 63 76.20 37.31 266.70 73.02
3 78 79.38 40.49 330.20 88.90
3½ 91 82.55 42.85 381.00 100.71
4 103 85.73 44.45 406.40 113.41
5 129 92.08 49.20 609.60 140.80
6 155 95.25 53.96 762.00 167.84
8 200 165.10 123.83 - 218.82

23TMSS01R01/DBA Date of Approval: May 26, 2015 PAGE 14 OF 24

TRANSMISSION MATERIALS STANDARD SPECIFICATION 23-TMSS-01, Rev.01

Figure 6: 45, 90-Degree Bends/Elbows for DB and EB Type Conduit

Table 14: Dimensions for DB and EB type 45, 90-degree bends/elbows

C
Socket Depth M
Trade size Metric B
Minimum Maximum
(inch) designators Radius (meters)
(mm) (mm)
2 53 44.45 69.5 0.46, 0.61, 0.91, 1.22, 1.52
3 78 73.03 100.8 0.46, 0.61, 0.76, 0.91, 1.22, 1.52
3½ 91 79.38 114.3 0.46, 0.61, 0.91, 1.22, 1.52
4 103 85.73 127.8 0.91, 1.22, 1.52
5 129 101.60 158.8 0.91, 1.22, 1.52
6 155 127.00 190.5 1.22, 1.52

23TMSS01R01/DBA Date of Approval: May 26, 2015 PAGE 15 OF 24

TRANSMISSION MATERIALS STANDARD SPECIFICATION 23-TMSS-01, Rev.01

N C

M D B A

Figure 7:Bell-Ends Coupling

Table 15: Dimensions for EPC-40-PVC type bell-ends
A B C Min. D
Trade Wall
Size Socket Inside Diameter at Socket Inside Diameter at Socket Depth
Entrance (mm) Bottom (mm) (mm) thickn- Inside
(Inch) 1
Avera ess Dia.
Average
ge (mm) (mm)
Max. Min. Toleranc Max. Min. Max. Min.
Toleran e
¾ ce ±
27.03 27.28 26.77 26.57 ± 0.10 26.82 26.31 38.10 18.26 2.41 21.18
1 0.10
33.78 ± 34.04 33.53 33.27 ± 0.13 33.53 33.02 47.62 22.22 2.54 26.90
1¼ 0.13 ±
42.60 42.90 42.30 42.04 ± 0.13 42.34 41.73 50.80 23.83 3.05 35.36
1½ 0.13
48.72 ± 49.02 48.41 48.11 ± 0.15 48.41 47.80 50.80 26.97 3.05 41.20
2 0.15
60.78 ± 61.09 60.63 60.17 ± 0.15 60.48 60.02 50.80 28.58 3.30 52.81
2½ 0.15
73.41 ± 73.79 73.02 72.85 ± 0.18 73.23 72.47 76.20 37.31 4.19 63.09
3 0.18
89.28 ± 89.66 89.08 88.70 ± 0.20 89.08 88.50 79.38 40.49 5.49 78.31
3½ 0.20 ±
101.96 103.05 101.78 101.40 ± 0.20 101.78 101.20 82.55 42.85 5.74 91.39
4 0.20
114.88 ± 115.95 114.45 114.07 ± 0.23 114.45 113.84 85.73 44.45 6.02 103.53
5 0.23
142.06 ± 143.33 141.81 141.05 ± 0.25 141.80 140.8 92.08 49.20 6.55 129.46
6 0.25
169.11 ± 170.38 168.83 168.00 ± 0.28 168.76 167.72 95.25 53.98 7.11 155.32
8 0.28
220.22 ± 221.62 218.82 218.69 ± 0.38 220.09 217.68 165.10 123.83 - -
0.38
1
Minimum wall thickness indicated shall be applicable at any point of socket.

Table 16: Dimensions for EB and DB type bell-ends

A B M D N C
Average Average Tolerance
Trade Minimum
Metric Socket Inside Socket Inside on Inside
Size Max. Min. Min. Socket
Design Diameter at Diameter at Diameter
(Inch) (mm) (mm) (mm) Depth
ators Entrance Bottom (mm) (mm)
(mm) (mm)
2 53 60.96 60.48 ± 0.15 108.7 55.19 70.6 44.45
3 78 89.87 89.10 ± 0.20 120.6 81.48 74.6 73.03
3½ 91 102.64 101.80 ± 0.20 134.1 93.17 76.2 79.38
4 103 115.42 114.53 ± 0.23 139.7 104.88 76.2 85.73
5 129 142.60 141.55 ± 0.25 165.1 131.95 108.6 101.60
6 155 169.85 168.55 ± 0.28 190.5 157.28 182.6 127.00

23TMSS01R01/DBA Date of Approval: May 26, 2015 PAGE 16 OF 24

TRANSMISSION MATERIALS STANDARD SPECIFICATION 23-TMSS-01, Rev.01

M X

Figure 8: Fitting Plugs

Table 17: Dimensions for EPC-40-PVC type fitting plugs

C
Trade size Metric Plug Depth (mm)
(inch) designators Maximum Minimum
¾ 21 38.10 18.26
1 27 47.62 22.22
1¼ 35 50.80 23.83
1½ 41 50.80 26.97
2 53 50.80 28.58
2½ 63 76.20 37.31
3 78 79.38 40.49
3½ 91 82.55 42.85
4 103 85.73 44.45
5 129 92.08 49.20
6 155 95.25 53.98
8 200 165.10 123.83

Table 18: Dimensions for DB and EB type fitting plugs

C X M F
Trade size Metric Plug Depth
Average Tolerance Max. Min.
(inch) designators Minimum
(mm) (mm) (mm) (mm)
(mm)
2 53 44.45 60.32 ± 0.15 65.9 9.1
3 78 73.03 88.90 ± 0.20 92.9 9.1
3½ 91 79.38 101.60 ± 0.20 108.7 9.1
4 103 85.73 114.30 ± 0.23 121.4 9.1
5 129 101.60 141.30 ± 0.25 143.7 10.3
6 155 127.00 - - - -

23TMSS01R01/DBA Date of Approval: May 26, 2015 PAGE 17 OF 24

TRANSMISSION MATERIALS STANDARD SPECIFICATION 23-TMSS-01, Rev.01

N C

F B A M

Figure 9: Male Terminal Adapters

Table 19: Dimensions for EPC-40-PVC type male terminal adapters

A B C
Min. F

Trade Socket Inside Diameter at Entrance Socket Inside Diameter at Bottom Wall Throat Diameter
Socket Depth (mm) thickn
Size (mm) (mm) (mm)
1
(Inch) Average Average -ess
Tolerance Max. Min. Tolerance Max. Min. Max. Min. (mm) Max. Min.
¾ 27.03 ± 0.10 27.28 26.77 26.57 ± 0.10 26.82 26.31 38.10 18.26 2.41 20.93 18.85
1 33.78 ± 0.13 34.04 33.53 33.27 ± 0.13 33.53 33.02 47.62 22.22 2.54 26.64 23.98
1¼ 42.60 ± 0.13 42.90 42.30 42.04 ± 0.13 42.34 41.73 50.80 23.83 3.05 35.05 31.55
1½ 48.72 ± 0.15 49.02 48.41 48.11 ± 0.15 48.41 47.80 50.80 26.97 3.05 40.89 36.80
2 60.78 ± 0.15 61.09 60.48 60.17± 0.15 60.48 59.87 50.80 28.58 3.30 52.50 47.24
2½ 73.41 ± 0.18 73.79 73.02 72.85 ± 0.18 73.23 72.47 76.20 37.31 4.19 62.71 56.44
3 89.28 ± 0.20 89.66 88.90 88.70 ± 0.20 89.08 88.32 79.38 40.49 5.49 77.92 70.13
3½ 101.96 ± 0.20 103.25 100.71 101.40±0.20 101.78 101.02 82.55 42.85 5.74 90.12 81.10
4 114.88 ± 0.23 115.95 113.41 114.07 ±0.23 114.45 113.70 85.73 44.45 6.02 102.26 92.02
5 142.06±0.25 143.33 140.80 141.05±0.25 141.80 140.38 92.08 49.20 6.55 128.19 115.37
6 169.11±0.28 170.38 167.84 168.00±0.28 168.76 167.23 95.25 53.98 7.11 154.05 138.63
8 220.22 ± 0.38 221.62 218.82 218.69 ± 0.38 220.09 217.68 165.10 123.83 - - -
1
Minimum wall thickness indicated shall be applicable at any point of socket.

Table 20: Dimensions for DB and EB type male terminal adapters

C F M N
Trade size Metric Adapter Depth
Minimum Maximum Minimum
(inch) designators Minimum
(mm) (mm) (mm)
(mm)
2 53 44.45 49.89 74.2 4.0
3 78 73.03 74.04 103.2 6.0
3½ 91 79.38 85.62 116.7 6.4
4 103 85.73 97.16 130.2 6.4
5 129 101.60 121.79 159.6 7.5
6 155 127.00 146.35 190.5 6.7

23TMSS01R01/DBA Date of Approval: May 26, 2015 PAGE 18 OF 24

TRANSMISSION MATERIALS STANDARD SPECIFICATION 23-TMSS-01, Rev.01

N C

B A M

Figure 10: Female Terminal Adapters

Table 21: Dimensions for EPC-40-PVC type female terminal adapters

A B C Min. F
Trade
Socket Inside Diameter at Entrance Socket Inside Diameter at Bottom Socket Depth Wall Throat Dia.
Size
(mm) (mm) (mm) thickn (mm)
(Inch) 1
-ess
Average Average
Max. Min. Max. Min. Max. Min. (mm) Max. Min.
Tolerance Tolerance
¾ 27.03 ± 0.10 27.28 26.77 26.57 ± 0.10 26.82 26.31 38.10 18.26 2.41 20.93 18.85
1 33.78 ± 0.13 34.04 33.53 33.27 ± 0.13 33.53 33.02 47.62 22.22 2.54 26.64 23.98
1¼ 42.60 ± 0.13 42.90 42.30 42.04 ± 0.13 42.34 41.73 50.80 23.83 3.05 35.05 31.55
1½ 48.72 ± 0.15 49.02 48.41 48.11 ± 0.15 48.41 47.80 50.80 26.97 3.05 40.89 36.80
2 60.78 ± 0.15 61.09 60.48 60.17± 0.15 60.48 59.87 50.80 28.58 3.30 52.50 47.24
2½ 73.41 ± 0.18 73.79 73.02 72.85 ± 0.18 73.23 72.47 76.20 37.31 4.19 62.71 56.44
3 89.28 ± 0.20 89.66 88.90 88.70 ± 0.20 89.08 88.32 79.38 40.49 5.49 77.92 70.13
3½ 101.96 ± 0.20 103.25 100.71 101.40±0.20 101.78 101.02 82.55 42.85 5.74 90.12 81.10
4 114.88 ± 0.23 115.95 113.41 114.07 ±0.23 114.45 113.70 85.73 44.45 6.02 102.26 92.02
5 142.06 ± 0.25 143.33 140.80 141.05±0.25 141.80 140.38 92.08 49.20 6.55 128.19 115.37
6 169.11 ± 0.28 170.38 167.84 168.00±0.28 168.76 167.23 95.25 53.98 7.11 154.05 138.63
8 220.22 ± 0.38 221.62 218.82 218.69 ± 0.38 220.09 217.68 165.10 123.83 - - -
1
Minimum wall thickness indicated shall be applicable at any point of socket.

Table 22: Dimensions for DB and EB type female terminal adapters

C F M N
Trade size Metric Adapter Depth
Minimum Max. Min.
(inch) designators Minimum
(mm) (mm) (mm)
(mm)
2 53 44.45 49.89 72.2 2.0
3 78 73.03 74.04 100.8 4.4
3½ 91 79.38 85.62 116.3 4.4
4 103 85.73 97.16 129.8 4.4
5 129 101.60 121.79 159.6 6.0
6 155 127.00 146.35 190.9 6.0

23TMSS01R01/DBA Date of Approval: May 26, 2015 PAGE 19 OF 24

TRANSMISSION MATERIALS STANDARD SPECIFICATION 23-TMSS-01, Rev.01

N C

M B A

Figure 11: Flat Caps

Table 23: Dimensions for EPC-40-PVC type flat

A caps B C
Min.
Trade
Socket Inside Diameter at Socket Inside Diameter at Socket Depth Wall
Size
Entrance (mm) Bottom (mm) (mm) thickn
(Inch)
-ess1
Average Average
Max. Min. Max. Min. Max. Min. (mm)
Toleranc Tolerance
¾ e
27.03 ± 0.10 27.28 26.77 26.57 ± 0.10 26.82 26.31 38.10 18.26 2.41
1 33.78 ± 0.13 34.04 33.53 33.27 ± 0.13 33.53 33.02 47.62 22.22 2.54
1¼ 42.60 ± 0.13 42.90 42.30 42.04 ± 0.13 42.34 41.73 50.80 23.83 3.05
1½ 48.72 ± 0.15 49.02 48.41 48.11 ± 0.15 48.41 47.80 50.80 26.97 3.05
2 60.78 ± 0.15 61.09 60.48 60.17± 0.15 60.48 59.87 50.80 28.58 3.30
2½ 73.41 ± 0.18 73.79 73.02 72.85 ± 0.18 73.23 72.47 76.20 37.31 4.19
3 89.28 ± 0.20 89.66 88.90 88.70 ± 0.20 89.08 88.32 79.38 40.49 5.49
3½ 101.96 ± 0.20 103.25 100.71 101.40±0.20 101.78 101.02 82.55 42.85 5.74
4 114.88 ± 0.23 115.95 113.41 114.07 ±0.23 114.45 113.70 85.73 44.45 6.02
5 142.06 ± 0.25 143.33 140.80 141.05±0.25 141.80 140.38 92.08 49.20 6.55
6 169.11 ± 0.28 170.38 167.84 168.00±0.28 168.76 167.23 95.25 53.98 7.11
8 220.22 ± 0.38 221.62 218.82 218.69 ± 0.38 220.09 217.68 165.10 123.83 -
1
Minimum wall thickness indicated shall be applicable at any point of socket.

Table 24: Dimensions for DB and EB type flat caps

C M N
Trade size Metric Adapter Depth
Max. Max.
(inch) designators Minimum
(mm) (mm)
(mm)
2 53 44.45 64.7 1.5
3 78 73.03 94.1 1.6
3½ 91 79.38 107.2 2.0
4 103 85.73 120.6 2.4
5 129 101.60 148.0 2.4
6 155 127.00 176.6 3.2

23TMSS01R01/DBA Date of Approval: May 26, 2015 PAGE 20 OF 24

TRANSMISSION MATERIALS STANDARD SPECIFICATION 23-TMSS-01, Rev.01

Figure 12: PVC Corrugated Flexible Tubing

Table 25: Typical dimension and weight of PVC corrugated flexible

tubing
O Approx.
Trade size Metric Feet Per
Wt. (Lbs.)
(inch) designators Outer diameter Bundle
per 100 ft

1 27 33.401 20 100

23TMSS01R01/DBA Date of Approval: May 26, 2015 PAGE 21 OF 24

Connection of Al-Nazeem S/S 8271 with 132kv Network in Riyadh City
PTS#22CC1143 & Contract Number:. 4400019349

List of Materials
 National Marketing Est. Co. Ltd.
‫شركة المؤسسة الوطنية للتسويق المحدودة‬

ISAM M. KHAIRY KABBANI PLASTIC & INSULATION FACTORY

Sr Description Manufacturer Material Type Color Country of

Origin
1 NEMA TC2 Pipes IKKPF PVC Conduits Grey KSA
½’’ – 8’’ NAMCODUCT

2 NEMA TC3 Long Radius IKKPF Grey KSA

PVC Fittings
Bend 45 deg. NAMCODUCT
½’’ – 8’’
3 NEMA TC3 Long Radius IKKPF Grey KSA
PVC Fittings
Bend 90 deg. NAMCODUCT
½’’ – 8’’
4 NEMA TC3 Coupling IKKPF Grey KSA
½’’ – 8’’ PVC Fittings
NAMCODUCT

5 NEMA TC3 Bell End IKKPF Grey KSA

PVC Fittings
½’’ – 8’’ NAMCODUCT
Connection of Al-Nazeem S/S 8271 with 132kv Network in Riyadh City
PTS#22CC1143 & Contract Number:. 4400019349

ISO + SASO Certificate

Our Reference: BVCERT/SAR-07 2023/0258 Date: 20th of Jul 2023

Letter of Recommendation

Kind Attention: TO WHOM IT MAY CONCERN

ISAM M.KHAIRY KABBANI PLASTIC & INSULATION FACTORY

DAMMAM 2ND INDUSTRIAL CITY, STREET NO 95, BESIDE AL IMAN BLOCK
FACTORY, 7202- UNIT NO. 3520, AD DAMMAM 34332-2770,
KINGDOM OF SAUDI ARABIA
Dear Sir,

We are pleased to inform you that your organization has successfully completed the
Certification audit for the below scope:

" MANUFACTURING OF POLYMER PLASTIC PIPES, FITTING AND

ACCESSORIES"

For the standard ISO 9001:2015 & recommended for certification.

The issuance of the certificate will take six weeks from the date of this recommendation
letter.
I take this opportunity to congratulate you and members of your team for this achievement.
Should you need more information, please do not hesitate to contact the undersigned.

Best regards

Muhammad Haris
Operations & Technical Manager - Certification

BUREAU VERITAS
P.O. Box 20189 | Al-Khobar 31952 | Kingdom of Saudi Arabia.
Tel. : +966 (13) 8821071 , Ext - 129 | Fax : +966 (13) 8821072| Mobile: +966 55 988 3982
Email : [email protected] | Web : http://www.bureauveritas.com
Connection of Al-Nazeem S/S 8271 with 132kv Network in Riyadh City
PTS#22CC1143 & Contract Number:. 4400019349

UL651 Confirmation certificate

Connection of Al-Nazeem S/S 8271 with 132kv Network in Riyadh City
PTS#22CC1143 & Contract Number:. 4400019349

Certificate of Conformance
Connection of Al-Nazeem S/S 8271 with 132kv Network in Riyadh City
PTS#22CC1143 & Contract Number:. 4400019349

10 Years Warranty Certificate

Connection of Al-Nazeem S/S 8271 with 132kv Network in Riyadh City
PTS#22CC1143 & Contract Number:. 4400019349

Company Catalogue
cable management
conduit system

Distributed by
National Marketing Est. Co. Ltd.
 @NAMATksa  @NAMATksa  Namat_ksa  (NAMAT)  NAMAT ksa
www.namat.com Direct No. +966 9200 18858

an IKK Group company

 Big thinking
precedes great achievement
- Wilferd Peterson -

who we are?
Isam M. Khairy Kabbani Plastic & Insulation Factory Company
(IKKPF) is a member of the IKK Group of Companies, one of the
100 Top Companies and largest corporations in Saudi Arabia,
headquartered in Jeddah. IKKPF manufacturing base is located
in Dammam, the KSA’s second Industrial City. It is specialized
in producing electrical cable management conduit pipes and
fittings as per Saudi, British & American standards.

A market leader serving traders and contractors in the Our modern manufacturing equipment and long expertise
KSA and neighboring countries through supplying high in plastic processing ensures that the utmost product
quality conduits and fittings. Our products not only meet standards and quality is maintained for all produced
the highest local and international standards, but are items. We are also dedicated in catering to our customer
ideally suited to the environmental conditions of the needs, on-time delivery, providing the right products on
kingdom and its neighbouring countries. the right time.
FOUNDER's
message

IKKPF’s strategic growth policy is to primarily

focus on its end-user industry. We shall
continue to invest in the core competencies to
stay ahead of the curve and capitalize on the
opportunities arising globally.

Isam M. Khairy Kabbani, Founder

Growth, in all its facets, has been a distinguishing factor at IKK Group, ever since our inception.
Our philosophy envisions growth as a universal concept that represents multiple possibilities and
touches all aspects of life. This explains why we have put in motion some of the most ambitious
plans, aligned to the needs of the Kingdom. The continuing expansion of our key business verticals
places us at an eminent level.

When ‘Excellence’ is at the heart of the company,

amazing things can happen.
Our newest project the “Isam M. Khairy Kabbani Plastic and fittings in the Kingdom and focus to achieve this
and Insulation Factory Company” (IKKPF) specializes leadership position.
into cable management & electrical ducting, influences
into one of its core capabilities. It possesses the IKKPF was established, after exploring the demands
manufacturing competence to produce customized and needs of not only the growing consumers in the
electrical conduits and fittings depending on the final Kingdom but also among its neighbouring countries.
application. With the current capacity and fully functional IKKPF is expected to benefit of this increasing demand
factory, we are passionate of further strengthening scenario. It is this confidence that makes us optimistic
the customer relationships that are likely to translate about our future and we anticipate it to be one of the
into higher financial gains and prepare IKK Group for most promising companies in IKK Group.
future growth.

IKKPF’s strategic growth policy is to primarily focus on its With best wishes,
end-user industry. We shall continue to invest in the core
competencies to stay ahead of the curve and capitalize Isam M. Khairy Kabbani
on the opportunities arising globally. Our practice of Founder
continuously innovating and experimenting to improve
the product quality has yielded results always. We intend
to be one of the largest producers of electrical conduits

www.namat.com 1
 National Marketing Est. Co. Ltd. www.namat.com

product markings, Material properties

& characteristics
NAMCODUCT® conduit pipes and fittings meet the having high anti-current puncture proof and lower
requirements prescribed by the following standards thermal conductivity than that of metals.
organisations: SASO, BS, NEMA and ASTM.
The products are also impact resistant, moisture proof,
Our PVC pipe conduit range in straight runs of 2.9, acids and alkalis-resistant and rust-free. Since PVC
3, 6 meters are marked with standards specification conduit pipes have no smell to attract rodents, it does
requirements, logo, product name, standard, schedule/ not cause any kind of biotic attacks.
class, country of origin, manufacturer name, and a
unique batch number that ensures traceability tracking Easy to install and maintain with complete range of
and quality control. solvent cement fabricated electrical fittings, light in
weight with a specific weight which is about one fifth
Some of the product characteristics are as of the steel pipe, resulting in a drop-down on the
follows: transportation cost, and facilitating pipes installation.
NAMCODUCT® products are non-flame propagating,
combustion proof with good insulation properties
Table 01

General Properties Test Method (ASTM) Unit Value

Mechanical Properties
PSI 7,000
Tensile Strength D - 638 / type1
MPA > 48.0
PSI 500,000
Modulus of Elasticity in Tension D - 639 / type1
MPA >3447.0
PSI 14,500
Flexural Strength D - 790 proc. B
MPA 93
Izod Impact D - 256 Ft-Lbs / In of notch 0.65
Hardness (Rockwell) D - 785 Rockwell "R" 119

Thermal Properties
D - 696 in/in/°F 3.0X10-5
Coefficient of Thermal Linear Expansion
D - 696 mm/mm/°C 5.4X10-5
Vicat Softening Point D - 1525 (Rate A) °C > 80
Heat Deflection D - 648 (264 psi) °C (°F) > 70 (158)

Electrical Properties
Dielectric Strength D - 150 Volts/Mil 1413
Dielectric Constant D - 150 60cps at 30 °C 3.7
Volume Resistivity D - 257 Ohm/cm at 95 °C 1.2 X 1012

Flammability Properties
Flammability rating UL - 94/0.062 Rating V-0
Flame Spread ASTM E84 10
Smoke Developed ASTM E84 250
Limiting Oxygen Index UL 94 43%
Burning Rate Self Extinguishing

2
NAMCODUCT®
Conduits, tubings & Ducts
SASO & british standard
SASO GSO IEC 61386-21/2014 & bs-en-61386 pipes Table 02

Light Gauge Medium Gauge Heavy Gauge

Pipe Size Min. Min. Min.

Wall Thickness Wall Thickness Wall Thickness
Inside Dia. Inside Dia. Inside Dia.
mm mm mm mm mm mm

16 1.10 13.4 1.40 12.8 1.60 12.4

20 1.20 17.2 1.60 16.5 1.80 16.0
25 1.40 21.7 1.80 20.9 1.90 20.7
32 1.50 28.5 2.10 27.3 2.50 26.5
38 1.50 34.5 2.20 33.1 2.50 32.5
50 1.90 45.6 2.50 44.4 3.20 43.0

NAMCODUCT® Conduits are offered in 2.9 meters long and black/ white color
Note: Previously BS6099

AMERICAN STANDARD
nema tc-2
Electrical Plastic Tubing (EPT) & Conduit (EPC-40 & EPC-80)
Dimensions of Electrical Plastic Tubing
Table 03
EPT-A-PVC EPC-40-PVC EPC-80-PVC
Trade Metric Outside
Size Size Diameter Min. Wall Min. Inside Min. Wall Min. Inside Min.Wall Min. Inside
Thickness Diameter Thickness Diameter Thickness Diameter
inch mm inch mm mm mm mm mm mm mm

1/2" 16 0.840 21.34 1.52 17.17 2.77 14.68 3.73 12.75

3/4" 21 1.050 26.67 1.52 22.50 2.87 19.81 3.91 17.72
1" 27 1.315 33.40 1.52 29.21 3.38 25.50 4.55 23.11
1 1/4" 35 1.660 42.16 1.78 37.46 3.56 33.90 4.85 31.16
1 1/2" 41 1.900 48.26 2.03 43.02 3.68 39.72 5.08 36.72
2" 53 2.375 60.32 2.54 54.07 3.91 51.33 5.54 47.77
2 1/2" 63 2.875 73.02 2.79 66.24 5.16 61.31 7.01 57.15
3" 78 3.500 88.90 3.18 81.33 5.49 76.40 7.62 71.62
4" 103 4.500 114.30 3.81 105.43 6.02 100.60 8.56 94.91
5" 129 5.563 141.30 – – 6.55 126.36 9.52 119.71
6" 155 6.625 168.28 – – 7.11 152.04 10.97 143.40
8" 200 8.625 219.00 – – 8.18 199.39 12.70 189.48

The above table confirms to SEC Specification 23 - TMSS 01 Table 03 (EPC 40).
EPT-A-PVC Electrical Plastic Tubing for encasement in concrete, EPC 40 Electrical Plastic Conduit for normal duty
application & EPC 80 Electrical Plastic Conduit for heavy-duty application
Note: Pipe Length: Standard 3 / 6 meters

www.namat.com 3
 National Marketing Est. Co. Ltd. www.namat.com

AMERICAN STANDARD
tc-6 & 8 pipes
PVC Plastic Utilities Duct for underground installations
Dimensions of underground utilities duct
(Minimum Modulus of Elasticity 500,000psi) Table 04

EB-20 EB-35 DB-60 DB-100 DB-120

Nominal Metric Outside
Size Designators Diameter Min. Min. Min. Min. Min.
Wall Thickness Wall Thickness Wall Thickness Wall Thickness Wall Thickness

inch mm mm mm mm mm mm mm

1" 27 33.40 – – – – 1.52

1 1/2" 41 48.26 – – – – 1.52
2" 53 60.32 1.52 1.52 1.52 – 1.96
3" 78 88.90 1.55 1.93 2.34 2.84 3.00
4" 103 114.30 2.08 2.54 3.07 3.68 3.91
5" 129 141.30 2.62 3.20 3.86 4.55 4.85
6" 155 168.28 3.18 3.86 4.62 5.41 5.77
In the above table EB-35 & DB-120 confirms to SEC Specification 23 - TMSS 01, Table-4.
"Type EB for Encased Burial in Concrete & Type DB for Direct Burial without Concrete
Note: Pipe Length: Standard 6 meters

SASO standard
uPVC Conduits/ Ducts
Size and dimensions as per SSA 14/15, GS 675/1997 & DIN 8061/62 Table 05

Nominal Series 2 (SDR 51) Series 3 (SDR 34.4) Series 4 (SDR 21) Series 5 (SDR 13.5)
Outside Nominal Wall Nominal Wall Nominal Wall Nominal Wall
Diameter Nominal Wt. Nominal Wt. Nominal Wt. Nominal Wt.
Thickness Thickness Thickness Thickness

mm mm kg/mtr mm kg/mtr mm kg/mtr mm kg/mtr

16 – – – – – – 1.2 0.090
20 – – – – – – 1.5 0.137
25 – – – – 1.5 0.174 1.9 0.212
32 – – – – 1.8 0.264 2.4 0.342
40 – – 1.8 0.334 1.9 0.350 3.0 0.525
50 – – 1.8 0.422 2.4 0.552 3.7 0.809
63 – – 1.9 0.562 3.0 0.854 4.7 1.290
75 1.8 0.642 2.2 0.782 3.6 1.220 5.6 1.820
90 1.8 0.774 2.7 1.130 4.3 1.750 6.7 2.610
110 2.2 1.160 3.2 1.640 5.3 2.610 8.2 3.900
125 2.5 1.480 3.7 2.130 6.0 3.340 9.3 5.010
140 2.8 1.840 4.1 2.650 6.7 4.180 10.4 6.270
160 3.2 2.410 4.7 3.440 7.7 5.470 11.9 8.170
200 4.0 3.700 5.9 5.370 9.6 8.510 14.9 12.800
250 4.9 5.650 7.3 8.310 11.9 13.200 18.6 19.900
Available in colors: Grey. Length: 6 meters
4
Kuwait Specs
uPVC Cable Ducts Table 06
Outside Diameter Wall Thickness
Nominal Size
Min Max MOC & NHA MEW
mm mm mm mm mm
50 50.0 50.2 3.0 –
75 75.0 75.3 – 2.6
90 90.0 90.3 4.5 –
110 110.0 110.3 4.5 3.2
160 160.0 160.4 5.0 3.6
200 200.0 200.4 – 4.5
Note: uPVC cable ducts meets requirements of local governmental bodies like MOC, NHA & MEW. The cable ducts
are offered in 4, 5.8 & 6 meters in length with grey or black color and solvent sockets.

BAHRAIN, U.A.E. & QATAR Specs

uPVC Electrical & Telephone Ducts
according to BTC, ETISALAT & QNBN Table 07
Outside Inside Diameter Inside Diameter
Effective Duct
Duct No. Diameter of Wall Thickness of Socket at of Socket at Socket Length
Length
Duct Entry Shoulder
mm mm mm mm mm meter
D54 96.5 ± 0.2 3.25 ± 0.2 97.1 ± 0.1 96.1 ± 0.1 100 5.9
D56 56.5 ± 0.2 3.25 + 0.2 57 ± 0.1 56 ± 0.1 70 3.07
38mm 38.0 + 0.1 2.0 + 0.1 38.2 + 0.1 37.8 +0.1 40 3

BAHRAIN Specs
uPVC Utilities Duct / Conduit
as per EDD (Size and dimension as per BS 3506) Table 08
Outside Diameter Wall Thickness
Nominal
Class B Class C Class D Class E
Pipe Size Min Max
Min Max Min Max Min Max Min Max
inch mm mm mm mm mm mm mm mm mm mm
4 114.10 114.50 3.4 3.8 4.5 4.0 6.0 6.6 7.3 7.8
6 168.00 168.50 4.5 5.0 6.6 6.0 8.8 9.7 10.8 11.9
Note: Ducts are offered in 5.8 or 6 meters in length with grey or black color and solvent cement end socket.

NAMCODUCT®
SPLIT DUCT Table 09
Split Duct is the fastest and easiest way to repair The fast and easy
broken ducts and is also cost effective. Cutting and Nominal method of installing
Segment
replacing of your conductors. Size duct around existing
The male - female groove design leads the industry cable for repair
degree (°) inch
in providing a strong, rigid solution for duct repair and temporary
situations. The interlocking design allows the split duct 45° 2" - 6" installations as Sch.
sections to be staggered and butted together. Joints 40 and 80.
may be sealed with tape and reinforced with plastic or 22 1/2° 2" - 6"
metallic straps to produce a rigid, stable unit. Split Sleeve Coupling
11 1/4° 2" - 6" for Joining Split Duct
Available in 2" through 6" diameters, this product to existing duct for
line also contains couplings and sweeps necessary to Two 45° Elbow may be
Sch. 40 and 80.
complete the system. segmented for 90°

www.namat.com 5
 National Marketing Est. Co. Ltd. www.namat.com

NAMCODUCT®
fittings/ conduit accessories
british standard FITTINGS
bs 4607 Part 3
Standard Coupling Expansion Coupling
Available in Black color. White color upon request. Available in Black color. White color upon request.

Size Std. Packs Size Std. Packs

Code No. Code No.
mm pcs mm pcs
SCPG020B 20 200 ECPG020B 20 80
SCPG025B 25 110 ECPG025B 25 40
SCPG032B 32 60 ECPG032B 32 40
SCPG038B 38 45 ECPG038B 38 25
SCPG050B 50 15 ECPG050B 50 15

Reducers Saddle & Base

Available in Black color. White color upon request. Available in Black color. White color upon request.

Size Std. Packs Size Std. Packs

Code No. Code No.
mm pcs mm pcs
RCPG25/20B 20X25 180 SDBA020B 20 200
SDBA025B 25 200
SDBA032B 32 130
SDBA038B 38 130
SDBA050B 50 50

Female Adaptor Male Threaded Adaptor

Available in Black color. White color upon request. Available in Black color. White color upon request.

Size Std. Packs Size Std. Packs

Code No. Code No.
mm pcs mm pcs
FTAA020B 20 200 MTAA020B 20 250
FTAA025B 25 12 0 MTAA025B 25 125
FTAA032B 32 60 MTAA032B 32 100
FTAA038B 38 40 MTAA038B 38 60
FTAA050B 50 20 MTAA050B 50 25

NAMCODUCT® Circular Boxes

1 Way Terminal Junction Box 2 Way Terminal Junction Box
Available in Black color. White color upon request. Available in Black color. White color upon request.

Size Std. Packs Size Std. Packs

Code No. Code No.
mm pcs mm pcs
1TJB020B 20 40 2TJB020B 20 30
1TJB025B 25 35 2TJB025B 25 25

6
3 Way Terminal Junction Box 4 Way Terminal Junction Box
Available in Black color. White color upon request. Available in Black color. White color upon request.

Size Std. Packs

Size Std. Packs Code No.
Code No. mm pcs
mm pcs
4TJB020B 20 20
3TJB020B 20 25 4TJB025B 25 18
3TJB025B 25 20

2 Way U Type Terminal Junction Box

Available in Black color. White color upon request.

Size Std. Packs

Angle 2 Way Terminal Junction Box Code No.
mm pcs
Available in Black color. White color upon request.
UTJB020B 20 30

Size Std. Packs UTJB025B 25 30

Code No.
mm pcs
ATJB020B 20 30
ATJB025B 25 30
H - Type Terminal Junction Box
Available in Black color. White color upon request.

Size Std. Packs

Code No.
mm pcs
HTJB020B 20 24

Y - Type Terminal Junction Box HTJB025B 25 24

Available in Black color. White color upon request.

Size Std. Packs

Code No.
mm pcs
Terminal (Circular) Lid
YTJB020B 20 25 Available in Black color. White color upon request.
YTJB025B 25 25
Size Std. Packs
Code No.
mm pcs
TRLD66B 66 225

Loop in Box
Available in Black color. White color upon request.
Screws
Screws for Junction Boxes
Size Std. Packs
Code No. Size Std. Packs
mm pcs Code No.
mm pcs
LPIN020B 20 40 ZSCRW012 12.35 X 4 200
LPIN025B 25 40 Screws for Saddle & Base
Size Std. Packs
Code No.
mm pcs
ZSCRW010 10.00 X 4 200

www.namat.com 7
 National Marketing Est. Co. Ltd. www.namat.com

british standard FITTINGS

bs 4607 Part 3

Bends
Available in Black color. White color upon request.

Size (d1) Std. Packs Radius (R)

Code No.
mm pcs mm R B
155OMMQKK20X1.55B 20 125 65
d1
155OMMQKK25X1.8B 25 60 90 y
d2 90°
155OMMQKK32X2.1B 32 25 125
155OMMQKK38X2.25B 38 15 159
C
155OMMQKK50X2.85B 50 1 240
y
AMERICAN STANDARD FITTINGS
nema tc-3
Male Adaptors Coupler
Available in grey color only Available in grey color only

Size Std. Packs Size Std. Packs

Code No. Code No.
inch pcs inch pcs

MTAA034G 3/4 120 SCPG034G 3/4 100

MTAA001G 1 120 SCPG001G 1 70

Pipe Base Spacer Pipe Inter Spacer

Available in black and grey color Available in black and grey color

Size Std. Packs Size Std. Packs

Code No. Code No.
inch pcs inch pcs

BASP4X2B 4X2 100 INSP4X2B 4X2 100

BASP6X2B 6X2 100 INSP6X2B 6X2 75

Dimensions – Base Spacers Table 10

CODE Nominal Size of Duct/Conduit Separation A C D
(Inch/MM) (Inch/MM) (Inch/MM) (Inch/MM) (Dia.) MM

BASP4X2B 4 / 110 2 / 50.80 5.31 / 134.87 6.75 / 171.45 4.63 / 117.60

BASP6X2B 6 / 160 2 / 50.80 6.38 / 162.05 8.88 / 225.55 6.75 / 171.45

Dimensions – intermediate Spacers Table 11

CODE Nominal Size of Duct/Conduit Separation B C D
(Inch/MM) (Inch/MM) (Inch/MM) (Inch/MM) (Dia.) MM

INSP4X2B 4 / 110 2 / 50.80 6.51 / 165.35 6.75 / 171.45 4.63 / 117.60

INSP6X2B 6 / 160 2 / 50.80 8.64 / 219.45 8.88 / 225.55 6.75 / 171.45

8
 Suggested Specification for pec Duct
Base & Inter Spacer
Duct (Conduit) bank shall be encased in concrete with
at least three inches of concrete at the top and bottom
and two inches on each side. A horizontal and vertical
separation between the ducts of 2 inches/50.8 mm shall
be maintained by installing IKK PF high impact spacers
with horizontal and vertical locking intervals of 1.5 Meters
to 2 Meters.

NAMCODUCT®
FABRICATED LONG RADIUS BENDS
nema standard (nema tc-3 Bends using NEMA TC-2 pipes) Table 12
Radius Socket Depth (B) Radius Socket Depth (B)
Nominal Size Outside Dia.
(R) Max Min (R) Max Min
inch inch mm inch inch inch mm mm mm
1/2" 0.840 21.34 4.00 1.500 0.652 101.60 38.10 16.56
3/4" 1.050 26.67 4.50 1.500 0.719 114.30 38.10 18.26
1" 1.315 33.40 5.75 1.875 0.875 146.05 47.63 22.23
11/4" 1.660 42.16 7.25 2.000 0.938 184.15 50.80 23.83
1 1/2" 1.900 48.26 8.25 2.000 1.062 209.55 50.80 26.97
2" 2.375 60.32 9.50 2.000 1.125 241.30 50.80 28.58
2 1/2" 2.875 73.02 10.50 3.000 1.469 266.70 76.20 37.31
3" 3.500 88.90 13.00 3.125 1.594 330.20 79.38 40.49
4" 4.500 114.30 16.00 3.375 1.750 406.40 85.73 44.45
6" 6.625 168.28 30.00 3.750 2.125 762.00 95.25 53.98
8" 8.625 219.08 40.00 6.500 4.875 1016.00 165.10 123.83

nema standard (nema tc-9 Bends using NEMA TC-8 & 6 pipes) Table 13
Outside Dia. U.S. Customary Unites Metric
Nominal 22°, 30° 22°, 30°,
45° & 90° 22° & 30° 45° & 90° 22° & 30°
Size 45° & 90° 45° & 90°
Radius Radius Sweep Radius Bends, Radius Bends, Radius Sweep Radius
inch inch mm degree degree feet degree degree feet
18, 24, 36, 18, 24, 36, 0.46, 0.61, 0.91, 0.46, 0.61, 0.91,
2" 2.375 60.32 12 1/2 3.8
48, 60 48, 60 1.22, 1.52 1.22, 1.52
18, 24, 30, 18, 24, 36, 0.46, 0.61, 0.76, 0.46, 0.61, 0.91,
3" 3.500 88.90 12 1/2 3.8
36, 48, 60 48, 60 0.91, 1.22, 1.52 1.22, 1.52
18, 24, 36, 18, 24, 36, 0.46, 0.61, 0.91, 0.46, 0.61, 0.91,
4" 4.500 114.30 12 1/2 3.8
48, 60 48, 60 1.22, 1.52 1.22, 1.52
5" 5.563 141.30 36, 48, 60 48, 60 12 1/2 0.91, 1.22, 1.52 1.22, 1.52 3.8
6" 6.625 168.28 48, 60 48, 60 12 1/2 1.22, 1.52 1.22, 1.52 3.8

Note: Size 1" and 1 1/2" can be produced upon request

www.namat.com 9
 National Marketing Est. Co. Ltd. www.namat.com

SASO standard
DIN/ SASO Bends using SSA 14/15, GS 675/1997 & DIN 8061/62
Socket Depth Curvature Table 14
Nominal Outside
S.No. Radius Average
Diameter Max (B) Min (B) Length (z)
mm mm mm mm mm
1. 16 90.00 32.00 16.00 141.30
2. 20 101.60 38.10 16.56 159.51
3. 25 114.30 38.10 18.26 179.32 S2 S1
4. 32 146.05 47.63 22.23 229.23 z
5. 40 184.15 50.80 23.83 289.11 R B
6. 50 209.55 50.80 26.97 328.94
7. 63 241.30 50.80 28.58 378.84 y
8. 75 266.70 76.20 37.31 418.72 d1
9. 90 330.20 79.38 40.49 518.41 90°
10. 110 406.40 85.73 44.45 638.04 d2
11. 140 762.00 90.00 48.50 1196.34 C
12. 160 762.00 95.25 53.96 1196.34
13. 200 952.00 165.10 123.83 1494.64 y
14. 225 952.00 165.10 123.83 1494.64
14. 250 1000.00 170.00 130.00 1570.00
15. 280 1168.00 180.00 140.00 1833.76
16. 315 1168.00 190.00 150.00 1833.76

QATAR Specs
Qatar National Broadband Network Co. (QNBC) Bends Table 15
Outside Internal Duct Inside Dia Inside Dia
Wall Socket Effective Actual Duct
Dia of Dia at SPIGOT of Socket of Socket Radius
Thickness Length Duct Length Length
Duct Type Duct at Entry at Entry at Shoulder
(d1) (d2) (S2) (S1) (R)
mm mm mm mm mm mm meter meter mm
Duct Bend
96.5 ± 0.2 3.25 ± 0.2 90.0 97.1 ± 0.1 96.1 ± 0.1 100 1.3 ± 0.005 1.4 ± 0.005 0.50
D54/90°
Duct Bend
56.5 ± 0.2 3.25 ± 0.2 50.0 57 ± 0.1 56 ± 0.1 70 0.8 ± 0.005 0.87 ± 0.005 0.25
D56/90°
Duct Bend
96.5 ± 0.2 3.25 ± 0.2 90.0 97 ± 0.1 96 ± 0.1 100 1.4 ± 0.005 1.5 ± 0.005 1.0
D54/30°
Duct Bend
56.5 ± 0.2 3.25 ± 0.2 50.0 57 ± 0.1 56 ± 0.1 70 1.0 ± 0.005 1.07 ± 0.005 0.50
D56/30°

WELD ON
PLAS TIC P IP E C E ME NT
CLEAR MEDIUM BODIED FAST SETTING
This is solvent cement (adhesive) is specially designed for electrical
and telecommunication duct installation manufactured by IPS Weld-On Adhesive, Inc., U.S.A.
Distinct characteristics of the proposed 701 Weld-On Cement;
1. Clear, Medium bodied, Fast setting solvent.
2. Highly viscous - 500 cPs of a medium body.
3. Meets the requirement for Low VOC (Volatile Organic Compound)
4. Adheres to a standard for PVC material ASTM D1755.
5. Can Brush Sizes were carefully chosen for the smallest pipe & fitting size.
For Sizes & Code Nos. please see the table below; Table 16
Code No. Sizes Std. Packs

615KSCW701 Quart 12 pcs

615KSCW701/2 1 Pint 12 pcs
615KSCW701/4 1/2 Pint 48 pcs
615KSCW701/8 1/4 Pint 48 pcs
Caution: Inflammable Mixture. Do NOT use near fire or flame.
10
NAMCODUCT®
fabricated couplings & bell ends
Repair Coupling Register Coupling Bell End Coupling
C C C C C

A D A D A

L L L

nema standard SASO standard

(nema tc-3 Fittings using NEMA TC-2 pipes) Fabricated Register,
Fittings (Repair Couplings, Register Couplings & Bell Ends) for use Repair Couplings &
with Rigid PVC Conduit & Tubing Table 17
Socket Socket Bell Ends Table 20
Entrance Socket Inside Entrance Socket Inside
Nominal
Average Length Diameter Average Length Diameter Register, Repair
Size
Dia Dia Couplings & Bell Ends
(A) (C) (D) (A) (C) (D)
inch inch inch inch mm mm mm Pipe O.D
Socket Finished
1/2" 0.860 0.652 0.630 21.84 16.56 16.00 Length Length
3/4" 1.074 0.719 0.834 27.28 18.26 21.18
1" 1.340 0.875 1.059 34.04 22.22 26.90 (C) (L)
1 1/4" 1.689 0.938 1.392 42.90 23.83 35.36 mm mm mm
1 1/2" 1.930 1.062 1.622 49.02 26.97 41.20 16 25 56
2" 2.405 1.125 2.079 61.09 28.58 52.81
20 27 58
2 1/2" 2.905 1.469 2.484 73.79 37.31 63.09
3" 3.530 1.594 3.083 89.66 40.49 78.31 25 30 66
4" 4.565 1.750 4.076 115.95 44.45 103.53 32 34 74
5" 5.643 1.937 5.097 143.33 49.20 129.46
6" 6.708 2.125 6.115 170.38 53.98 159.32 40 39 94
8" 8.582 4.724 7.795 218.00 120.00 198.00 50 45 96
(nema tc-9 Fittings using NEMA TC-6 & TC-8 pipes) 63 53 126
Fittings (Repair Couplings, Register Couplings & Bell Ends) for PVC plastic 75 60 140
utilities duct for underground installations Table 18 90 69 160
Socket 110 81 185
Socket
Socket Inside Entrance Socket Inside
Nominal Entrance 140 99 230
Inside Dia Length Diameter Average Length Diameter
Size 160 111 250
Dia
(A) (C) (D) (A) (C) (D) 200 135 300
inch inch inch inch mm mm mm
225 150 360
1" 1.338 1.181 1.330 34.00 30.00 33.80
250 165 380
1 1/2" 1.889 1.515 1.842 48.00 38.50 46.80
2" 2.400 1.750 2.381 60.96 44.45 60.48 280 183 425
3" 3.538 2.875 3.508 89.87 73.02 89.10 315 204 478
4" 4.544 3.375 4.509 115.42 85.72 114.53
355 224 520
5" 5.614 4.000 5.573 142.60 101.60 141.55
6" 6.687 5.000 6.636 169.85 127.00 168.55 400 246 570
Dimensions stated above are indicative
QATAR Specs
Qatar National Broadband Network Co. (QNBC)
Register Coupling Table 19
Outside Inside Dia Inside Dia
Wall Inside Socket Effective Actual Duct
Dia of of Socket at of Socket at
Duct Type Thickness Diameter Length Duct Length Length
Duct Entry Shoulder
(A) (D) (C)
mm mm mm mm mm mm meter meter
Duct Collar D54 96.5 ± 0.2 3.25 ± 0.2 97.1 ± 0.1 96.1 ± 0.1 90.00 100 0.1 0.3

www.namat.com 11
Connection of Al-Nazeem S/S 8271 with 132kv Network in Riyadh City
PTS#22CC1143 & Contract Number:. 4400019349

Company Profile
COMPANY PROFILE
National Marketing Est. Co. Ltd.

The Company
National Marketing Est. Co. Ltd. (NAMAT) is engaged in the building materials distribution
business in the kingdom of Saudi Arabia. The company was formed in 1970 to be the sole
distributor of “New Products Industries” Factory (NEPRO-PLAST), it is considered the first
leading company in the Gulf area specialized in the field of uPVC and CPVC pipes and fittings.
Nowadays, NAMAT is representing several major international manufacturers and considered a
leader in trading Plastic and non-Plastic pipes and fittings, accessories for water network, well
casing, corrugated optic ducts (COD), electrical conduits, food waste disposals, and a wide
variety of other products.

NAMAT is a subsidiary of IKK Group of Companies which is one of the largest conglomerates in
the Kingdom of Saudi Arabia. The IKK Group is a diversified group operating in the fields of
trading, manufacturing, and contracting for the construction industry. It is composed of 15
independent companies. These companies operate through 156 divisions, branches, and outlets
that are spread over 9 countries covering all major cities in the region. IKK Group has
maintained a ranking among the top 100 companies in the kingdom of Saudi Arabia in the last
10 years. It is ranked the 39th top company in Year 2008 with revenues close to one billion US
dollars in fiscal 2008.

NAMAT employs more than 500 staff with yearly revenues exceeding 800 millions of Saudi
Riyals. Its Headquarter is located in the Red Sea coastal city of Jeddah. NAMAT has established
the standards for quality and excellence in its field through-out the 40 years it has been
servicing its customers in the K.S.A. market. One of the major strengths of NAMAT in the
market is its investment in its sales force to serve its trader and contractor clients through-out
K.S.A. market. The existing sales force compromise of more than 100 qualified sales
representatives, which are proportionally distributed throughout the Kingdom.

Mission
To continue our market leading position in the building materials services business. NAMAT is
committed to delivering a wide range of high quality products to our local and regional
customers. Will continue to search out and secure distribution rights for newer high quality
products. We understand our customer's needs and will work hard to provide them the right
products at the right time.

Distribution Infrastructure
NAMAT has 20 primary branches for distribution located in the major metropolitan areas and
cities across the K.S.A. NAMAT has a fleet of more than 100 trucks and vans for delivering its
products which enables it to provide service to all its customers in less than 24 hours. It has

Revision: 3
14/08/10 Page | 1
COMPANY PROFILE
National Marketing Est. Co. Ltd.

warehousing capacity to stock materials in the excess of 100,000 square meters of space.
Inventory control is strictly monitored through an Enterprise Resource Planning (ERP) system to
ensure that adequate supplies are always available within its customers reach. All invoicing
records and customer transactions are accurately issued and easily tracked through the ERP
system. In addition to NAMAT’s strong distribution network within K.S.A. market, it has an
export department that serves other major markets in the region including all Gulf countries,
Yemen, Sudan, Egypt, Jordan, Syria, Lebanon, Pakistan, Iran, Morocco, Tunisia, and other
African countries.

Distribution Agreements
NAMAT has established strong relations and made several distribution agreements with local and
world class manufacturers in Europe and USA to market and sell their products in K.S.A. market
and other neighboring markets. Following is the list of main manufacturers:

 NEPRO (sister company): manufacturer of PVC/CPVC pipes & fittings and HDPE pipes -KSA
 IPS Corporation: manufacturer of Weld-On Solvent Cements and Cleaners for joining plastic
materials –USA
 Henkel: manufacturer of Tangit adhesive and Cleaner for joining plastic materials –Germany
 Friatec: manufacturer of HDPE electro-fusion fittings and valves –Germany
 Baenninger: manufacturer of HDPE butt-welding fittings -Germany
 DYKA: manufacturer of PVC sewerage Terra Cotta fittings -Holland
 FIP: manufacturer of PVC Pressure Metric Fittings and Valves -Italy
 GIRPI: manufacturer of PVC Drainage fittings for Solvent Welding -France
 Praher: manufacturer of PVC valves –Austria
 IPEX: manufacturer of PVC & CPVC fittings –USA
 Tyco-Bayard: manufacturer of cast iron valves, Fire Hydrants and accessories – France
 Tyco-Talbot: manufacturer of pipe Saddles and associated equipment to water industry -UK
 SPEARS: manufacturer of PVC and CPVC fittings and Valves –USA
 Charlotte: manufacturer of PVC DWV fittings and Cast Iron Pipe Systems –USA
 Ford: manufacturer of water meter boxes -USA
 Franken Plastik: manufacturer of indicator plates –Germany
 In-Sink-Erator: manufacturer of food waste disposals –USA
 OptiRoad Inc.: manufacturer of Corrugated Optic Duct (COD) –South Korea

A Broad Product Portfolio

NAMAT offers a broad and diverse product portfolio in the areas of pipes and fittings, accessories
for water network, well casing, electrical conduits, food waste disposals, and a wide variety of
other products. Following are the main products NAMAT offers its customers:

Revision: 3
14/08/10 Page | 2
COMPANY PROFILE
National Marketing Est. Co. Ltd.

 NEPRO Pipes:

­ PVC pipes from 16 - 710mm OD are manufactured in different classes suitable for 2, 4, 6,
10 & 16 Bar working pressure according to SASO 14 & 15/1996, DIN 8061, 8062, &
19532, Pr EN 1401, & Pr EN 1452-2, and ISO 4422, These pipes can be produced in
different colors such as Gray, Orange, Black, White & Blue Etc... ).
­ PVC pipes from 1/2 inch up to 8 inches diameter according to ASTM D-1784, 1785. SCH
40 & 80.
­ PVC pipe sizes from 1/2 inch up to 8 inches diameter in different classes (B,C,D & E)
according to BS 3505 & 3506.
­ PVC pipe according to NEMA standard TC-2, TC-6 and TC-8.
­ PVC Perforated pipe for underground de-watering.
­ PVC water well casing and screen according to DIN 4925 part I, II, and III standards
­ CPVC FlowGuard pipes different sizes for Sch80 according to ASTM F441
­ HDPE pipes from 20mm to 400mm OD are manufactured according to DIN 8074 and DIN
EN 12201-2 standards

 NAMAT Fittings:

­ NAMAT PVC Sch40 and Sch80 fittings according to ASTM D-2466 & 2467
­ NAMAT CPVC Sch80 fittings according to ASTM F437 & F439
­ NAMAT Soil, waste, and drainage fittings according to ISO 3633 & ISO 4435 which
complies with SASO 1397 & 1399 in orange-brown color RAL 8023
­ NAMAT PVC & CPVC Brass insert fittings

 Imported PVC, CPVC, and HDPE Fittings:

­ ASTM Sch40 & Sch80 from IPEX –USA

­ ASTM Sch80 from Spears –USA
­ Fabricated large bore fittings from Plastinitics –USA
­ Terra Cotta drainage from DYKA –Holland
­ Drainage solvent welded fittings from Girpi –France
­ Pressure metric solvent weld fittings from FIP –Italy
­ PVC DWV fittings from charlotte –USA
­ HDPE electro-fusion fittings and valves from Friatec –Germany
­ HDPE butt-welding fittings from Baenninger -Germany
­ UL electrical fittings and spacers from Carlton –USA
­ UL electrical fittings and spacers from IPEX –USA
­ UL spacers from CAL AM - USA

 Accessories for water network:

­ Solvent Cements, primers, and cleaners from IPS (Weld-On) and Henkel (Tangit)
­ DCI valves, fire hydrant, and project accessories from Tyco/Bayard -France

Revision: 3
14/08/10 Page | 3
COMPANY PROFILE
National Marketing Est. Co. Ltd.

­ Water meter boxes from ford -USA

­ Tapping saddles and house connection accessories from Tyco/Talbot –UK
­ Indicator plates from Frankin Plastic –Germany
­ PVC & CPVC valves from Spears-Hayward –USA
­ PVC & CPVC valves from Praher –Austria
­ PVC & CPVC valves from FIP –Italy

 Other products:

­ Corrugated Optic Ducts (COD) for fiber-optic and power cables from OptiRoad –S. Korea
­ Food waste disposals and steaming hot water taps from In-Sink-Erator -USA

Reference Projects
NAMAT’s strong presence in the market and its diverse high quality products enable it to be
approved by most of the consultants and be well qualified for the mega projects in K.S.A and
the surrounding markets. Below is a list of some of the major projects NAMAT has actively
involved in:

 K.S.A. Projects:

1. King Abdullah University for Science and Technology Jeddah-KSA

2. Princess Nora University Riyadh-KSA
3. King Abdullah Financial District Riyadh-KSA
4. King Abdullah Economic City Jeddah-KSA
5. King Abdul-Aziz International Airport Extension Jeddah-KSA
6. Jabal Omar Project Mekkah-KSA
7. Shamiah Project Mekkah-KSA
8. Jizan Economic City Jizan-KSA
9. Knowledge Economic City Medinah-KSA
10. Al Qasr Project Riyadh-KSA
11. Power Plant (PP-10) Project Riyadh-KSA
12. King Saud University –Female Campus Riyadh-KSA
13. Information Technology & Communication Complex Riyadh-KSA
14. Shams Al Riyadh Project Riyadh-KSA
15. Al Khobar Lakes Khobar-KSA
16. Maaden Diammonium Phosphate (DAP) Project Ras Al Zawr-KSA
17. Royal Commission Housing Projects Jubail-KSA
18. King Faisal University Infrastructure Hassa-KSA
19. Saudi Aramco North Park Office Dhahran-KSA
20. Municipality dewatering Lines Jubail-KSA

Revision: 3
14/08/10 Page | 4
COMPANY PROFILE
National Marketing Est. Co. Ltd.

 Gulf Countries Projects:

1. Al Ain Parking Project -UAE

2. Abu Dhabi Water Network -UAE
3. Five Parks Project -UAE
4. Extension of Salwa Industrial Area -Qatar
5. Al Ain/Abu Dhabi Water Line Project -UAE
6. Al Shoyeba Project -Qatar
7. Ras Lafan LNG-JGC Corporation Project -Qatar
8. Kuwait Airport Landscaping Phase II -Kuwait
9. Oil Plant Project -Qatar

 Other Countries Projects:

1. Sudanese Free Zone Project -Sudan

2. Al Ghaydah Potable Water Project -Yemen
3. Sana’a Water Network Phase III -Yemen
4. Hodeidah Water & Drainage Local Authority Phase I -Yemen
5. Madani Project -Sudan
6. Ministry of Agricultural Project -Jordan/Iraq
7. Water well casing & screen project -France
8. Water well casing & screen project -Iran
9. Addis Ababa International Airport -Ethiopia
10. Kandahar Airbase Project -Afghanistan
11. Agha Khan Hospital Project -Pakistan

Revision: 3
14/08/10 Page | 5
COMPANY PROFILE
National Marketing Est. Co. Ltd.

Management Team
The management team of NAMAT is highly trained with diversified international and local
experience in their own fields. The continuous growth of NAMAT is a testimony to the
commitment and dedication of management and staff. The organizational chart of NAMAT is
provided below.

IKK Group
Chairman
IKK Group
Vice Chairman

IKK Group National Marketing

General Manager General Manager

Purchasing Manager Operations & Development

Sales Organization Manager Finance Manager

Western Region Branches Accounting Manager

Central Region Branches

Eastern Region Branches

Export Manager

Revision: 3
14/08/10 Page | 6
Connection of Al-Nazeem S/S 8271 with 132kv Network in Riyadh City
PTS#22CC1143 & Contract Number:. 4400019349

Photograph of the Sample

Connection of Al-Nazeem S/S 8271 with 132kv Network in Riyadh City
PTS#22CC1143 & Contract Number:. 4400019349

Method of Statement
 METHOD OF SOLVENT WELDED JOINT INSTALLATION
1. Joint Preparation - Cut pipe square with axis, using a fine tooth saw with a miter box or guide.
Remove all burrs and break the sharp lead edges.
2. Cleaning & Priming-Surface to be joined must be cleaned and free of dirt, moisture, oil and
other foreign material.

APPLYING WELD-ON PRIMER

3. Mark on spigot the full length of the socket side to make sure that the spigot will fit exactly the
socket length.
4. Application of solvent cement - PVC solvent cement is fast drying and should applied as
quickly as possible, consistently with good workmanship. Follow up the manufacturer’s
recommendation to both spigot and socket side with an adequate quantity of cement.
5. Joint Assembly - While both the inside socket surface and the outside surface of the spigot
of the pipe are wet with solvent cement, forcefully bottom the spigot in the socket. Turn the
pipe or fittings 1/4 turn during assembly (but not after the pipe is bottomed) to distribute
the cement evenly. Hold for a while until handling strength is developed. Assembly should be
completed within 30 seconds after the last application of solvent cement.
6. After assembly wipe excess cement from the pipe at the end of the socket. Gaps in the
cement bead around the pipe perimeter may indicate a defective assembly. Handle the newly
assembled joints carefully after 1 hour.

Importance Points of Pipe Installation with Solvent Cement Joints

1. The jointing surfaces must be clean and dry Although NAMCO cement joints achieve
2. Sufficient cement must applied to fill the gap between male and female ends initial setting in a very short time the
3. The Assembly must be made while the surfaces are still wet and fuild joints does not reach its full strength for
4. Completed joints should not be disturbed until they have cured sufficiently to withstand about 24 hours. Therefore, cemented
handling. joints must be left overnight before
5. Keep the solvent cement closed and shaded when not actually in use. Discard the solvent pressure testing is carried out.
cement when a noticeable change in viscosity occurs, when the cement does not flow freely
from the brush or when the cement appears lumpy and stringy.

For 100 Joints u se the following amounts of adhesive and primer (Table No. 13)

Pipe Outside Diameter DN O.D. Dia / mm Primer (kg) Adhesive (kg)

25 32 Approx. 0.5 Approx. 0.8

32 40 Approx. 0.7 Approx. 1.1
40 50 Approx. 0.9 Approx. 1.6
50 63 Approx. 1.7 Approx. 1.7
60 75 Approx. 1.3 Approx. 2.2
80 90 Approx. 1.4 Approx. 4.0
100 110 Approx. 1.7 Approx. 8.0
125 125 / 140 Approx. 2.1 Approx. 13.0
Connection of Al-Nazeem S/S 8271 with 132kv Network in Riyadh City
PTS#22CC1143 & Contract Number:. 4400019349

Material Test Certificates

 INSPECTION REPORT Page 1 of 20
Isam M. Khairy
Report Kabbani Plastic &
EVO Job No: 85639-1 01 Date of Report: 24 Nov. 2021 Customer:
No: Insulation Factory
(IKKPF)

CUSTOMER DATA INTERTEK DATA

Name: Intertek Project No. 85639-1
Dammam-2nd Industrial Area, St 95 off main street 104.
PO Box 2145 Al Khobar 31952, KSA Client P.O./I.O. to
Address: PO#545/2021
Intertek:
Attn: Omar Alsasa Phone: 9668923556 Requisition No: N/A
E-Mail : [email protected] Date of Order: N/A
Intertek Contract
Copies to: N/A Jiovanni Sagcal
Coordinator:
SUPPLIER/SUB-SUPPLIER DATA INSPECTION INFORMATION
Inspection
With Customer Supplier With Sub-Supplier Date(s) of Visit(s):
Performed:
18 & 19 Aug 2021
P.O. No: Change No: Requisition No: 19 Oct 2021
17 Nov 2021
PO # 545/2021 N/A Date of Previous Visit: N/A
Date of Next Scheduled
Supplier: ACES Lab Jeddah N/A
Visit:
P. O. Status: Complete Incomplete
Supplier Job No: Project Name:
ACES Lab
Location: PVC Pipe Testing
Al Nujoum Street 25 Mushrifah Dist 3, Jeddah
Primary Contact: Mayar Qasem Materials/Items Inspected:
Phone: 011 - 8077192 E-mail : [email protected] PVC Pipes

Sub-supplier: N/A
Sub-Supplier Job
N/A
No:
Location: N/A
Pre-Inspection Meeting
Primary Contact: N/A Yes No
Summary Attached:
Phone: N/A E-mail : N/A Summary Report Attached: Yes No

INSPECTION DISPOSITION: Accept Nonconformance(s) Identified Placed on Hold Other (Explain)

INSPECTION SUMMARY AND CONCLUSION:
Inspection visits was carried out on 18th,19th Aug,19th Oct, & 17th Nov. 2021 to perform witness of the Testing for PVC Conduits at Aces
lab.Conclusive summary of tests conducted during all visits is stated below.
EB–35 – 6”
1-Impact Resistance Test As per NEMA TC 6&8 : Results-Acceptable
2-Duct Stiffness Test As per NEMA TC 6&8 : Results-Acceptable
DB–120 – 6”
1-Impact Resistance Test As per NEMA TC 6&8 : Results-Acceptable
2-Duct Stiffness Test As per NEMA TC 6&8 : Results-Acceptable
EPC – 40-8”
1‐ Deflection Resistance Test As per NEMA TC2 : Results-Acceptable
2‐ Impact Impact Test As per NEMA TC2 : Results-Acceptable
3‐ IZOD Impact Test As per ASTM D256 : Results-Acceptable
Title Form Number Revision mm/dd/yyyy Instructions
Inspection Report Form MI-1220-01 E 08/07/2019 SOP-1220
 INSPECTION REPORT (continuation page) Page 2 of 20
Isam M. Khairy Kabbani
Evo Job No: 85639-1 Report No: 01 Date of Report: 24 Nov 2021 Customer : Plastic & Insulation Factory
(IKKPF)

4‐ Tensile Strength Test As per ASTM D638 : Results-Acceptable

5‐ Heat Deflection Temperature Test As per ASTM D648 : Results- Acceptable
EPC – 40-2”
1-Resistance to specified reagents as per UL651: @0 days, @60 days, @90 days -weight & crushing- Results-Acceptable.
2‐ 90°C wire use conduit as per UL 651: @0 days, @60 days, @90 days - imapact Results-Acceptable.

RECOMMENDED ACTION:
N/A
DAYS TRAVEL DISTANCE:
INSPECTION TIME 4 Days -- --
HOURS HOURS : MI KM

Technical
Muhammad Shahzad Bhatti Date: 24 Nov 2021 Project Coordinator : Jiovanni Sagcal
Specialist:

This report is made solely on the basis of the Client’s instructions and/or information and materials supplied. It is not intended to be a
recommendation for any particular course of action. Intertek does not accept a duty of care or any other responsibility to any person other
than the Client in respect of this report and only accepts liability to the Client insofar as is expressly contained in the terms and conditions
governing Intertek's provision of services. Intertek makes no warranties or representations either express or implied with respect to this report
save as provided for in those terms and conditions.

1.0 ATTENDEES

NAME COMPANY REPRESENTED TITLE

Mr. Muhammad Shahzad Bhatti Intertek KSA Technical Specialist-QA/QC

Mr. Omar Alsasa IKK GROUP Product Manager
Mayar Qasem ACES Lab Jeddah Technician
-- SEC Representatives Engineer
-- National Grid Representative Engineer

2.0 MATERIALS

2.1 GENERIC MATERIALS

TAG / EQPT NO. DESCRIPTION

-- PVC Conduits

2.2 MATERIALS INSPECTED

QUANTITY
PRODUCT / MATERIAL / ITEM ORDERED PRESENTED ACCEPTED
PO ITEM NO. TAG / SERIAL NO. ACCEPTED TO
NAME QUANTITY THIS VISIT THIS VISIT
DATE
N/A

Title Form Number Revision mm/dd/yyyy Instructions

Inspection Report Form MI-1220-01 E 08/07/2019 SOP-1220
 INSPECTION REPORT (continuation page) Page 3 of 20
Isam M. Khairy Kabbani
Evo Job No: 85639-1 Report No: 01 Date of Report: 24 Nov 2021 Customer : Plastic & Insulation Factory
(IKKPF)

3.0 DOCUMENTS USED

DOCUMENT NO. REVISION TITLE APPROVAL STATUS

-- -- Relevant standards for each type of Testing --

4.0 SCOPE OF INSPECTION

ITP LINE NO. ITP ACTIVITY DESCRIPTION ITEMS RESULTS CLAUSE

N/A

5.0 EQUIPMENT AND INSTRUMENTATION USED (TO BE SUPPLIED BY SUPPLIER)

EQUIPMENT / INSTRUMENT DESCRIPTION SERIAL NO CALIBRATION CERT. NO. EXPIRY DATE

All Testing Machines N/A N/A Valid Calibration

6.0 INSPECTION DETAILS

Following Tests are witnessed at ACES Lab during the visits carried out on 18 & 19 Aug 2021, 19 Oct 2021, 17 Nov 2021.

Samples of 6” Diameter:
EB – 35
1‐ Impact Resistance Test As per NEMA TC 6&8:
5 samples no tearing or cracking in all samples,
NEMA Requirements all 5 shall pass if one failed 5 new should be added for total of 9 out of 10
passing.
Results-Acceptable

2‐ Duct Stiffness Test As per NEMA TC 6&8:

Average of 3 results = 270.97 Kpa,
NEMA Requirements Min 241 Kpa.
Results-Acceptable

DB – 120
1‐ Impact Resistance Test As per NEMA TC 6&8:
5 samples no tearing or cracking in all samples
NEMA Requirements all 5 shall pass if one failed 5 new should be added for total of 9 out of 10
passing.
Results-Acceptable

Title Form Number Revision mm/dd/yyyy Instructions

Inspection Report Form MI-1220-01 E 08/07/2019 SOP-1220
 INSPECTION REPORT (continuation page) Page 4 of 20
Isam M. Khairy Kabbani
Evo Job No: 85639-1 Report No: 01 Date of Report: 24 Nov 2021 Customer : Plastic & Insulation Factory
(IKKPF)

2‐ Duct Stiffness As per NEMA TC 6&8:

Average of 3 results = 854.16 Kpa, NEMA
Requirements Min 827 Kpa.
Results- Acceptable

Samples of 8” Diameter:
‐ EPC – 40
1‐ Deflection Resistance Test As per NEMA TC2:
Average of 3 results 99.73% retained thickness,
NEMA TC2 Requirements Min % retained is 70.
Results-Acceptable

2‐ Impact Test As per NEMA TC2:

10 samples no tearing or cracking in all samples,
NEMA Requirements 7 out of 10 shall pass.
Results-Acceptable

3‐ IZOD Impact Test As per ASTM D256:

Average of 4 results 264.3 J/m,
ASTM D4396 Requirements More than 80.1 J/m.
Results-Acceptable

4‐ Tensile strength Test As per ASTM D638:

Average of 6 results 46.6 MPa
ASTM D4396 Requirements Min 27.5Mpa.
Results-Acceptable

5‐ Heat Deflection Temperature Test As per ASTM D648:

Average of 2 results 104°C
ASTM D4396 Requirements Between 100 ‐ 110°C
Results-Acceptable

Samples of 2” Diameter:
‐ EPC – 40
1‐Resistance to specified reagents Test As per UL651:
@0 day, @60 days, @90 days -weight & crushing
Results-Acceptable.

2‐ 90°C wire use conduit:

@0 day, @60 days, @90 days - impact
Results-Acceptable.

Please refer attached detailed Testing reports.

Title Form Number Revision mm/dd/yyyy Instructions

Inspection Report Form MI-1220-01 E 08/07/2019 SOP-1220
 INSPECTION REPORT (continuation page) Page 5 of 20
Isam M. Khairy Kabbani
Evo Job No: 85639-1 Report No: 01 Date of Report: 24 Nov 2021 Customer : Plastic & Insulation Factory
(IKKPF)

7.0 NON-CONFORMANCES

NCR # DESCRIPTION DATE RAISED DATE CLOSED

N/A

8.0 QUALITY OBSERVATIONS

- N/A

9.0 ATTACHMENTS TO THIS REPORT

- Lab Testing Reports

10.0 PHOTOGRAPHS

Photographs taken during Lab Testing

Title Form Number Revision mm/dd/yyyy Instructions

Inspection Report Form MI-1220-01 E 08/07/2019 SOP-1220
 INSPECTION REPORT (continuation page) Page 6 of 20
Isam M. Khairy Kabbani
Evo Job No: 85639-1 Report No: 01 Date of Report: 24 Nov 2021 Customer : Plastic & Insulation Factory
(IKKPF)

Title Form Number Revision mm/dd/yyyy Instructions

Inspection Report Form MI-1220-01 E 08/07/2019 SOP-1220
 INSPECTION REPORT (continuation page) Page 7 of 20
Isam M. Khairy Kabbani
Evo Job No: 85639-1 Report No: 01 Date of Report: 24 Nov 2021 Customer : Plastic & Insulation Factory
(IKKPF)

Title Form Number Revision mm/dd/yyyy Instructions

Inspection Report Form MI-1220-01 E 08/07/2019 SOP-1220
 INSPECTION REPORT (continuation page) Page 8 of 20
Isam M. Khairy Kabbani
Evo Job No: 85639-1 Report No: 01 Date of Report: 24 Nov 2021 Customer : Plastic & Insulation Factory
(IKKPF)

Title Form Number Revision mm/dd/yyyy Instructions

Inspection Report Form MI-1220-01 E 08/07/2019 SOP-1220
 INSPECTION REPORT (continuation page) Page 9 of 20
Isam M. Khairy Kabbani
Evo Job No: 85639-1 Report No: 01 Date of Report: 24 Nov 2021 Customer : Plastic & Insulation Factory
(IKKPF)

Title Form Number Revision mm/dd/yyyy Instructions

Inspection Report Form MI-1220-01 E 08/07/2019 SOP-1220
 INSPECTION REPORT (continuation page) Page 10 of 20
Isam M. Khairy Kabbani
Evo Job No: 85639-1 Report No: 01 Date of Report: 24 Nov 2021 Customer : Plastic & Insulation Factory
(IKKPF)

Title Form Number Revision mm/dd/yyyy Instructions

Inspection Report Form MI-1220-01 E 08/07/2019 SOP-1220
 INSPECTION REPORT (continuation page) Page 11 of 20
Isam M. Khairy Kabbani
Evo Job No: 85639-1 Report No: 01 Date of Report: 24 Nov 2021 Customer : Plastic & Insulation Factory
(IKKPF)

Title Form Number Revision mm/dd/yyyy Instructions

Inspection Report Form MI-1220-01 E 08/07/2019 SOP-1220
 INSPECTION REPORT (continuation page) Page 12 of 20
Isam M. Khairy Kabbani
Evo Job No: 85639-1 Report No: 01 Date of Report: 24 Nov 2021 Customer : Plastic & Insulation Factory
(IKKPF)

Title Form Number Revision mm/dd/yyyy Instructions

Inspection Report Form MI-1220-01 E 08/07/2019 SOP-1220
 INSPECTION REPORT (continuation page) Page 13 of 20
Isam M. Khairy Kabbani
Evo Job No: 85639-1 Report No: 01 Date of Report: 24 Nov 2021 Customer : Plastic & Insulation Factory
(IKKPF)

Title Form Number Revision mm/dd/yyyy Instructions

Inspection Report Form MI-1220-01 E 08/07/2019 SOP-1220
 INSPECTION REPORT (continuation page) Page 14 of 20
Isam M. Khairy Kabbani
Evo Job No: 85639-1 Report No: 01 Date of Report: 24 Nov 2021 Customer : Plastic & Insulation Factory
(IKKPF)

Title Form Number Revision mm/dd/yyyy Instructions

Inspection Report Form MI-1220-01 E 08/07/2019 SOP-1220
 INSPECTION REPORT (continuation page) Page 15 of 20
Isam M. Khairy Kabbani
Evo Job No: 85639-1 Report No: 01 Date of Report: 24 Nov 2021 Customer : Plastic & Insulation Factory
(IKKPF)

Title Form Number Revision mm/dd/yyyy Instructions

Inspection Report Form MI-1220-01 E 08/07/2019 SOP-1220
 INSPECTION REPORT (continuation page) Page 16 of 20
Isam M. Khairy Kabbani
Evo Job No: 85639-1 Report No: 01 Date of Report: 24 Nov 2021 Customer : Plastic & Insulation Factory
(IKKPF)

Title Form Number Revision mm/dd/yyyy Instructions

Inspection Report Form MI-1220-01 E 08/07/2019 SOP-1220
 INSPECTION REPORT (continuation page) Page 17 of 20
Isam M. Khairy Kabbani
Evo Job No: 85639-1 Report No: 01 Date of Report: 24 Nov 2021 Customer : Plastic & Insulation Factory
(IKKPF)

Title Form Number Revision mm/dd/yyyy Instructions

Inspection Report Form MI-1220-01 E 08/07/2019 SOP-1220
 INSPECTION REPORT (continuation page) Page 18 of 20
Isam M. Khairy Kabbani
Evo Job No: 85639-1 Report No: 01 Date of Report: 24 Nov 2021 Customer : Plastic & Insulation Factory
(IKKPF)

Title Form Number Revision mm/dd/yyyy Instructions

Inspection Report Form MI-1220-01 E 08/07/2019 SOP-1220
 INSPECTION REPORT (continuation page) Page 19 of 20
Isam M. Khairy Kabbani
Evo Job No: 85639-1 Report No: 01 Date of Report: 24 Nov 2021 Customer : Plastic & Insulation Factory
(IKKPF)

Title Form Number Revision mm/dd/yyyy Instructions

Inspection Report Form MI-1220-01 E 08/07/2019 SOP-1220
 INSPECTION REPORT (continuation page) Page 20 of 20
Isam M. Khairy Kabbani
Evo Job No: 85639-1 Report No: 01 Date of Report: 24 Nov 2021 Customer : Plastic & Insulation Factory
(IKKPF)

----END OF THIS REPORT---

Title Form Number Revision mm/dd/yyyy Instructions

Inspection Report Form MI-1220-01 E 08/07/2019 SOP-1220
Connection of Al-Nazeem S/S 8271 with 132kv Network in Riyadh City
PTS#22CC1143 & Contract Number:. 4400019349

NAMCODUCT Previous Approvals

 ENGINEERING & DESIGN DEPARTMENT
ENGINEERING & DESIGN DIVISION - EOA
Room 2-211W, SEC-EOA Headquarters, Dammam
12 - 07 - 2021 (02 - 12 - 1442)

SUBMITTAL REPLY FORM

Letter No. : 21 - 01031 - 30501301
Project Title : REPLACEMENT OF EXISTING OUTDOOR AINDAR SUB-30 WITH NEW GIS
SUBSTATION
PTS No. : 18EN121
Contract No. : 4400012010/00

X Transmission Engineering Specialist, PD-E/PD-Al-Hasa

Submittal Code No. : N.A

Submittal Reference No. : 21-8231-120224 dated 07/07/2021
Submittal Description : Compliance to Technical Submittal for PVC Conduits (Manufacturer:
NAMCO)
Contractor Name : Abahsain

E&DD/E&DD-EOA REPLY:

A Acceptable B Acceptable with minor comments/notes

C Comments D Rejected

* 1) Compliance is noted.
2)The given above approval does not relieve the contractor from his contractual responsibility and
obligation to meet all requirements of Contract and SOW /TS.

Should you have any question, please contact Mohammed Shariq on extension 8-4972.

JAFAR A. AL-HEJJI
Lead Engineer
E&DD/E&DD-EOA/C&MEU

MS /MA : ms
Attachment: a/s
cc: E&DD Letter File (soft copy)
Route: MA/MS

1 OF 1
Review of Contractor's Submittal (CSPD)

CENTRAL PROJECTS DEPARTMENT

Qassim and North Substation Projects Division
REVIEW OF CONTRACTOR'S SUBMITTAL

Submittal No. : 2021/PM/EPC/DWD/047 Rev.00 Date : January 26, 2021

CONTRACT No.: 191001263705 CONTRACTOR : Delta (CJSC)

BUDGET ITEM No : JOB ORDER No.:
PROJECT TITLE :CONNECTION
Reinforcement of 132/33KV HOUSINGS/S
OF ALDAWADMI SS 8919 & 8922
8610inWITH
Hail.132 KV NETWORK, IN DAWADMI AREA.

From : Div. Manager, QNPD To : Delta (CJSC)

Buraydah, Qassim 51421- P.O.Box 545 P.O.Box 10373 Riyadh 11433
Tel : (01) 63220003 Fax : (01) 63220937 Tel:(011)4171900 Fax (011) 4171919

ACCEPTANCE OF THE FOLLOWING SUBMITTAL IS HEREBY REQUESTED:

Check in the Drawings / Materials / Test Reports Others (Specify)
Appropriate Box: Sketches Equipment
FILL-UP APPLICABLE INFORMATION BELOW:
Description :
Technical Submittal for 200mm PVC Pipes
Reference Specification :
Manufacturer/Supplier : Isam M. Khairy Kabbani Plastic & Insulation Factory Company (IKKPF)
Vendor Address : Dammam, KSA
Expected Delivery Time :

COMPLYING WITH SCOPE OF WORK AND TECHNICAL SPECIFICATIONS? YES NO

IF" NO " INDICATE DEVIATIONS : (Provide justification and attach supporting documents)

(Contractor) (National Grid-SA)

Submitted by : Project Manager Received by : Project Engineer, Q & N Projects
Signature : Signature :
Name : Engr. Ahmed Siddig Bala Name : Engr. Abdul-Aziz A. Al-Ageeli
Date : 26/01/2021 Date : 26/01/2021

FOR NG USE ONLY

NG HAVE REVIEWED THE ABOVE Refrence # : 21/1172/12031401
SUBMITTAL AND FOUND IT: Date: 09/02/2021
Acceptable
Acceptable As Noted
Not Acceptable (Resubmit)
Provide Additional Information
See Attached Comments Please use extra sheets if needed.
Civil Project Engineer (Contractor)
PD-C / Qassim & North Projects Division Received by
Signature :
Signature :
Name :
Name : Engr. Abdul-Aziz A. Al-Ageeli Date :
Date

NOTE : Acceptance does not release the Contractor from his responsibilities in performing the work in strict
conformance with Contract, Scope of Work and Technical Specifications.