Scribd
Upload
147 views1 page

Eaton Fire Addressable Mimic PCB zpcb2252 Datasheet 1217

The document describes Eaton's Cooper Mimic PCBs, which can be used as master or slave boards to provide up to 250 LED or relay outputs for mimic panels. The master board controls up to 32 outputs directly and can support up to 7 additional slave boards daisy chained to it. Each slave also controls 32 outputs. The outputs can be programmed individually as fire or fault indicators and assigned to different zones or addresses. An external 24V DC power supply is required for the master board.

Uploaded by

Shahbaz Alam
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
147 views1 page

Eaton Fire Addressable Mimic PCB zpcb2252 Datasheet 1217

The document describes Eaton's Cooper Mimic PCBs, which can be used as master or slave boards to provide up to 250 LED or relay outputs for mimic panels. The master board controls up to 32 outputs directly and can support up to 7 additional slave boards daisy chained to it. Each slave also controls 32 outputs. The outputs can be programmed individually as fire or fault indicators and assigned to different zones or addresses. An external 24V DC power supply is required for the master board.

Uploaded by

Shahbaz Alam
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Eaton Product Datasheet ZPCB2252-MML/MMR & ZPCB2252-MSL/MSR

Addressable Fire Products Intelligent Addressable Mimic PCB

ZPCB2252-MML/MMR & ZPCB2252-MSL/MSR


Eaton’s Cooper Mimic PCB
Up to 250 outputs can be connected to the mimic PCB’s.
This offers more capability to the extensive options
already offered by the CF3000 control panel.
The ZPCB2252-MML or ZPCB2252-MMR is the master
PCB which can control up 32 outputs. If further outputs
are required ZPCB2252-MSL or ZPCB2252-MSR can
daisy chain onto the master PCB offering a total outputs
of 250.
Each slave can control up to 32 outputs.
The master board can be loop or network driven and
does required an external 1A 24V dc power supply.
The flexibility of these boards is further enhanced by the
fact that each output can be programmed for fire or fault
Code ZPCB2252-MML/ZPCB2252-MMR with up 5 different zones or addresses per output.
ZPCB2252-MSL/ZPCB2252-MSR
Description Mimic PCB This can be programmed using the CF3000
Specification programmable repeater software and downloaded using
Quiescent Current 310mA the RS232 port.
Operating Loop Voltage 18V dc to 30V dc These boards are typical used for geographical LED
Inputs 4mA to 20mA mimic displays.
External PSU 15V dc to 30V dc
Outputs
Voltage 24V dc to 30V dc
Features & Benefits
Current 10mA • Available as master or slave, each has 32 outputs
Environmental
• 250 outputs (1 master and 7 slaves)
Humidity (Non Condensing) 0 to 95% RH
Physical • Ideal for mimic panel provision
Dimensions (H x W) 10mm x 290mm
• Each output can be programmed as fire or fault
Weight 0.25Kg
Compatibility • Each output can be operated by address, zone or panel
Suitable for use with Cooper Fire Systems activation
• 2 versions available:
Loop powered installation
- LED
1. Recommended loop cable: FIRETUF / FP200 / MICC
- Relay output
2. Boards have built in isolators
• Soft addressed
• Built in short circuit isolation
Notes
• Simple configuration using Cooper site installer
If loop powered no addressing of the interface is
required • Easy to install
1. Only connect cable screen to its adjacent earth
terminal Catalogue numbers
Description Code
2. 24V dc external power supply is required
Mimic LED PCB (master) ZPCB2252-MML
Mimic Relay PCB (master) ZPCB2252-MMR
Mimic LED PCB (slave) ZPCB2252-MSL
Mimic Relay PCB (slave) ZPCB2252-MSR

You might also like