F&G Device Data Sheets

Doc.
Pro. Code Station Phase Disc. P.O Number Ser. No. Rev.
Type

MANUAL CALL POINT DATA SHEET

F&G Layout
INDOOR/
Item Tag No. QTY. Service Description IP Protection No.1389-AR- EX Classification
OUT DOOR
DE-IN-LY-

1 MAC-7010 1 Manual Call Point- Oil Drum Storage Shelter Outdoor IP66 002 In Safe Area

2 MAC-7020 1 Manual Call Point- Generator Building Indoor IP44 004 In Safe Area

MAC-7000/30/40/50/60/70
3 9 Manual Call Point- Control Room / Switchgear / Substation / Transformers Area Indoor IP44 010 In Safe Area
MAC-7150/60/70
4 MAC-7080 1 Manual Call Point- Control Room / Switchgear / Substation / Transformers Area Indoor IP66 010 EEX"d" IIB T3
MAC-7260/70/80/90
5 10 Manual Call Point-Process Area Outdoor IP66 014 EEX"d" IIB T3
MAC-7300/10/20/30/40/50
6 MAC-7180 1 Manual Call Point- Air Compressor Building Indoor IP44 005 In Safe Area

1 GENERAL Unit Ref. Note 6 FLAME DETECTOR Unit Ref. Note

1.01 Type Manual call point 6.01 Type N/A
1.02 Manufacturer APOLLO/CORTEM 6.02 Opertaing Distance
SC2900-001/55200-003-APO/
1.03 Manufacture Model No. 6.03 Operating sector
CSCPEA2
1.04 Operating Temp. Limits -50°C +80°C /-30°C +70°C °C 6.04 Response time
1.05 Complete assembly Yes 6.05 Stabilization time
90x90x63/ 110x110x74 mm
1.06 Dimension mm 6.06 Self check facility
/92x89x170 mm
1.07 Mounting bracket Mounting Accessoires 6.07 Other
1.08 Mounting Surface Mount 3
1.09 Weight 2150 g/150g 7 H2 GAS DETECTOR Unit Ref. Note
1.10 Other 7.1 Type N/A
7.2 Measuring Range
2 HOUSING Unit Ref. Note 7.3 Zero/span adjustment
2.01 Type Break Glass 7.4 Accuracy
2.02 Enclosure protection IP44/66 7.5 Repeatability
2.03 Ex classification Safe Area/Exd 7.6 Response time
2.04 Cable connection NA / Cable gland 7.7 Enclosure protection
ISO M20x1.5 with
2.05 Cable entry 7.8 Ex. classification
Adaptor for Ex type
2.06 Element/housing connection Screw connection 7.9 Material
2.07 Meterial Polycarbonate/Copper free AL 7.10 Other
2.08 Color Red
2.09 Operation Break glass 8 ELECTRICAL Unit Ref. Note
2.10 Reset Key reset 8.01 Output signal Conventional Loop VDC
2.11 Label Fire 8.02 Supply voltage 24 (18~32) VDC
8.03 Consumption 0.1 Standby & >8 Signal mA
3 HEAT DETECTOR Unit Ref. Note 8.04 RFI immunity Yes
3.01 Type N/A 8.05 Communication N/A
3.02 Set Point 8.06 Load limitation 30VDC
3.03 Rate of rise 8.07 Other
3.04 rate of rise
3.05 Repeatability 9 NOTES
3.06 Other 1) Blanks item shall be filled by related vendor.
2) V.T.S.: Vendor To Specify
4 SMOKE DETECTOR Unit Ref. Note 3) V.T.C.: Vendor To Confirm
4.01 Type N/A 4) Indoor Call Points are wall mounted and outdoor Call Points are yoke Mounted
5) Outdoor MCP’s shall be of the heavy-duty type with bodies of stainless steel, or carbon steel if suitably
4.02 Sensitivity
protected.
4.03 Repeatability 6) Each MAC shall have a line monitoring circuitry for open and short circuit line fault.
4.04 Other 7) The MAC shall be equipped with a key operated test facility.
8) Just Outdoor type or Explosion Proof Type MAC shall be equipped with gland.
5 GAS DETECTOR Unit Ref. Note 9) Mounting accessories shall be provided by vendor refering to F&G detection location layout.
5.01 Type N/A
5.02 Calibrated range
5.03 Zero/span adjustment
5.04 Accuracy
5.05 Repeatability
5.06 Stabilization time
5.07 Max operational path length
5.08 Immunity against sun
5.09 Free cylinder time
5.10 Response time
5.11 Enclosure protection
5.12 Ex. classification
5.13 Material
5.14 Other