PLCB36D3L8AAJA

Rechargeable Lithium-Ceramic Battery

Ultra-Safe
High Energy
Higher Space Usage Efficiency

Benefits

Ultra-Safe and Good Heat-Dissipation.

High Energy Density and Capacity.
- By large foot-print battery cells and max.
cell volume: Electrical characteristics
263% energy density of LMO.

Modular cost decrease. Nominal capacity 8300 mAh
- Save cooling system, thermal Nominal voltage 3.75 V
management and BMS.

Operational Window -20°C~85°C. Operating voltage 4.35~2.75V

Higher Space Usage Efficiency. Able to be set
in any possible place. Mechanical characteristics
Key features Thickness (max) 3.7 mm

Ultra-Safe.
- No fire, no smoke and no leakage after Width (max) 133.5
physical impact. Length (max) 218.5
- Hazard Level 1~3 passed.

High Energy Density. Typical weight 240 g
- 643Wh/L and 241Wh/Kg in 2018
- 1073Wh/L and 380Wh/Kg in 2021 Operating conditions

High Stability (Storage) CC-CV (Constant Current & Constant Voltage)
Standard charge
- Storage at 85°C/14 days, recovery > 98%, Current 0.2CmA/ Voltage 4.4V
Swelling ratio <10% Cut-off current: 0.05C
- Storage at 105°C/14 days. (@3,8V~4.0V)
- Storage at -40°C/3 months, recovery > Max charge current 2C
98%. No salt out. Standard discharge CC (Constant Current)
- Storage at -65°C/1 month, recovery > Current 0.2CmA
98%. No salt out. Cut-off voltage: 2.75V

High Stability (Operation) Max discharge current 2C
- Able to be charged at 85°C
- Able to be discharged at 90°C. Operation window – 20°C to + 60°C

Large Footprint (up to W:480 x L:1170 in Cycle Life (recommend) SOC80% (4.2V) to DOD95% (3.3V)
2018)
Main applications * Consult ProLogium for optimized charging below -20°C

BEV/E-Bike

Industrial / Rugged Tablet

Medical Tablet, AIO PC

High Safety Required Applications

Transportation and storage:

Store in a dry place at a temperature
preferably not exceeding 30°C.

For long-term storage, keep the battery
within a (30 ± 15) % state of charge.

Doc. 1332218- AP05-180105

 PLCB36D3L8AAJA
2D Drawing
.

Discharge profiles (0.2/0.5/0.75/1/1.5/2C rate)

0.2C CC/CV charge to 4.35V, cut off 0.05C
Voltage (mV) 0.2C/0.5C/0.75C/1C/1.5C/2C discharge from 4.4V to 2.75V
4,350

4,150

3,950

3,750

3,550

3,350 0.2C Discharge

0.5C Discharge
3,150 0.75C Discharge
1C Discharge
2,950 1.5C Discharge
2C Discharge
2,750
0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100%
Capacity Ratio
Unit: mm
Tolerances : ±0.5mm
Operation Temperature Test (-20°C to +60°C)
0.2C CC/CV charge to 4.35V, cut off 0.05C @ 25℃
When handling ProLogium batteries: Voltage (mV)
4,550
0.2C discharge from 4.35V to 2.75V @ Test Temp.

Do not throw the battery into fire, nor heat. 4,350

60℃
45℃

Do not disassemble nor modify. 25℃
4,150 10℃

Do not leave in a place of ≥60°C. 0℃

Prevent from water or moisture. 3,950 -10℃
-20℃

Do not add strong shock, nor drop. 3,750

Do not solder lead directly to battery body.
3,550

Do not short + and – terminals with metal.

Do not charge beyond the condition which described 3,350

on the delivery specification. 3,150

Do not inverse charge. 2,950

2,750
Typical characteristics: 0% 10% 20% 30% 40% 50%
Capacity Ratio
60% 70% 80% 90% 100%

Charge/Discharge Profile Cycle Life Test

0.2/0.5C CC/CV charge to 4.35V, cut off 0.05C 0.5C CC/CV charge to 4.35V, cut off 0.05C, rest 15min
Voltage (mV) Retention 0.5C discharge to 3.0V, rest 15min
0.2C discharge from 4.35V to 2.75V
4,550 100%

90%
4,350

80%
4,150
70%
3,950
60%
3,750
50%
3,550
40%

3,350
30%

3,150 0.2C Charge 20%

2,950 10% 0.5C Cycle Life

0.2C Discharge

2,750 0%
0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% 0 50 100 150 200 250 300 350 400 450 500
Capacity Ratio Cycle

Doc. 1332218- AP05-180105