Unimake

Thank you for purchasing our USB Digital Microscope, it is a slim type tool and can be easily used
in different fields, including:

1. Textile industrial for textile inspection

2. Printing inspection
3. Industrial inspection: PCB, Precision machinery…
4. Educational purpose
5. Hair examination
6. Skin examination
7. Microbiological observation
8. Jewelry & coin (Collections) inspection
9. Visual Assistance
10. Others

Currently we have two models of Digital Microscope: USB port and TV port formats.
The USB microscope must be connected to the computer and TV microscope be connected to visual
device (N/P). User interface is very friendly and you can do the Measure work easily.
You can find more information of the product on this manual.

23
Unimake

CONTENTS

Introduction ············································································23

Contents ················································································24

Parts of Microscope ···································································25

Specification ···········································································25

Notes before use ·······································································26

Product Outlook & Standard parts ··················································26

Hardware and system requirements ·················································26

How to install the Driver software ··················································26

How to install the measurement software ··········································31

How to install the .Net Framework ·················································32

Measurement instructions ····························································34

Function options ·······································································36

How to do the calibration ·····························································38

Other Usage ···············································································40

24
Unimake

Parts of Microscope
USB Line
Focus roller

Magnification
Ratio

Snap

LED Light Metal Fixed

Stand

Specification
Image CMOS Sensor
Controller High Speed DSP (Driver Free available)
Focus Range 10mm ~ far view
Snap Shot Software and Hardware
Video Capture Resolution Standard 640*480, Max 1600*1200
Built-in 8 White-light LED and adjustable illumination ensure the magnified images are clear and bright
Still Image Capture Resolution Standard 640*480, Max 1600*1200
Frame Rate 30 f/s under 600 LUX Brightness
Digital Zoom 5X Sequence Mode
Brightness Control Manual adjustment
Magnification Range 100X-200X, 50X-400X, 50X-500X, 50X-600X, 800X, 1000X
Power Supply USB Port (5V DC)
USB 2.0 & USB 1.1 Compatible
Operation System Windows XP, Vista, Win 7 32 bit and 64 bit.
Language: English, Chinese and other language by selection
System Requirement: Pentium Computer with 700M Hz & above,
20M HD Space CD ROM Driver, 64MB RAM, Direct X VGA Card
25
Unimake

CD disk Driver and Micro-Measurement Tool

Product dimension 112 mm (L) X 33 mm (R)
Product net weight: 250g
Available color: Matting black, Turnish and other colors.

Notes before use

1. Don’t dissemble the digital Microscope or change the interior parts,
it can cause damage.
2. Don’t clean the Microscope with alcohol organic solvents
3. Don’t touch the lens with your fingers.
4. Avoid outdoor use if possible.
5. Storage temperature , 0eC ~ 40eC,Humidity:45%RH ~ 85RH%.
6. In case the product gets wet, leave PC connection immediately. And do not dissemble or dry by hair
dryer. Send to repair center if the digit microscope was effected by liquid or other elements.
7. Measurement Data only for reference.

Product Outlook & Standard parts

1. Digital Microscope (1pcs)
2. USB 2.0 cable
3. Metal fixed Stand (1pcs)
4. CD ROM (Driver, Measurement software, User Manual)

Hardware system requirements

Windows 2000ǃXPǃVISTAǃWIN7 Pentium 1G, Celeron, AMD 1G & above,
128MB Memory, 150MB Hard Disc memory space, 16-bit & above
VGA, CD-ROM, USB2.0 or USB1.1.

How to install the Driver

The Digital Microscope is a free Driver Productˈit can be worked immediately after connected to the
computer with operation system above win2000 version.
1. Connect the Portable digital microscope by USB2.0 cable to your computer, double click “my
computer” icon on your computer desktop, below interface will be shown up.

26
Unimake

2. Double click the Video device icon as above red marked in your computer. Now it is ready to use.

If you can’t find the Video device, or if your computer can’t recognize it,
Please follow below steps to install the driver.

Insert the attached CD, open “My Computer”, and double click the “DVD/CD Driver” to open the CD.

27
Unimake

Driver installation
Choose and install the Driver, then reset the computer

28
Unimake

29
Unimake

Reset the computer after driver installation at once;

Installation may be blocked by the antivirus software, so let the antivirus software allow all processes, or
close the antivirus before installing. If installation succeeds, you can see the icon on the Toolbar,
also the software desktop icon, double click to run it.

Now you can use the microscope. Long press the SNAP button on the microscope to take images, and the
ZOOM button to have digital zoom function.
30
Unimake

Measurement installation
Choose and install the Measurement

31
Unimake

Click “Finish” and the installation completes.

Microsoft .NET Framework installation

If the PC is Windows XP or older version, .Net Framework 4.0 is needed. Install it.

32
Unimake

33
Unimake

After the installation completes, double click at computer desktop to start using the software.

Plug-in the devices, Display in operation window

34
Unimake

Click open the operation system

Choose the Image resolution from 320*240 to 1600*1200, default at VGA Mode640*480

Click To use measurement function.

35
Unimake

Click to open pictures, and click to save pictures

Video PLAY (Pause) ,STOP

Image Parameter including Image setting and special effects

36
Unimake

Magnifier

Click Ruler, as followings

37
Unimake

Click start calibration make sure certain accuracy.

Our experience told us that measurement could be controlled at 99% high precision. Measure tolerance
could be caused from human eye distortion and defocus. More practice is helpful to measurements.

Key in the Measure data (Pixel), Unit, and Click’ OK’

38
Unimake

Warning: Please do calibration again once Magnification Ratio changed.

Color setting of display character

Click to export word or excel format.

39
Unimake

Example: Measure data under word file

From Left to right:

Line, ring, Square, Polygon, Set-line Length, Oval, Arc, Point to Point distance, Point to Line distance,
Parallel line, Angle

40
Unimake
For example 1
Line measurement:

For example 2
Rectangular measurements:

41
Unimake

For example3
Ring measurements:

For example 4
Arc measurements:

42