PRODUCT DATA SHEET

ANODEFLEXTM 3000-Ti Series

Product properties of AnodeflexTM 3000-Ti Series
Product Information Diameter 1.5” / 38mm
Conductor wire type Dual-insulated AWG #6 or #8
Anodeflex 3000-Ti Series products are long-line flexible anodes for MMO wire type Solid titanium wire with mixed metal oxide
impressed-current cathodic protection of buried pipelines, in-plant coating
piping and of on-grade or buried storage tanks. Product weight 1lb/ft. / 1.5kg/m
Consists of: Fill material LorescoTM SC-3 (or approved alternate)
Fill volume 0.77lb/ft. / 1.15kg/m
• Central Copper Conductor: Dual insulated AWG #6 or #8 conductor
Casing (sock) Synthetic fabric
cable for the MMO wire connected at fixed distances to deliver the
Braiding Polypropylene filament
required current without incurring substantial longitudinal voltage Current output Anodeflex 3020 20 mA/ft. / 66 mA/m
drop. Insulation protects the conductor from chemical attack in the Anodeflex 3100 100 mA/ft. / 328 mA/m
presence of chlorine, hydrochloric acid, sulfuric acid or other strong Anodeflex 3200 200 mA/ft. / 656 mA/m
oxidizing agents. Installation temperature Min. 0°F / -18°C, no maximum
• Mixed Metal Oxide coated anode (MMO): Solid titanium wire with Min. bend radius 20” / 500mm
mixed metal oxide coating provides low attenuation in combination
with prepackaged carbon backfill. Designed for minimum 20-year Shipping weights & dimensions
service life at maximum current output of up to 200mA/ft. / Reel lengths 500’, 1000’, 1500’, 2000’
656mA/m for 3200 product. 100m, 200m 400m, 500m
• Carbon Backfill: Pre-packaged, high performance calcined Pallet dimensions 44”x45”, 52” - 64” high depending on reel length
petroleum carbon backfill, serving as the active matrix in which the Pallet weights per 500’ reel 1000’ 1500’ 2000’
electrochemical reactions take place. reel length 700lbs 1260lbs 1830lbs 2330lbs
• Fabric Jacket: Integrated woven, acid resistant and porous jacket 100m reel 200m 400m 500m
336kg 540kg 636kg 863kg
holding the carbon backfill in place around the anode.
Handling Handle with care. Keep reels on edge rails. Do not
• Protective Braid: Tough, porous, non-conductive protective braid puncture the cable.
enhancing the abrasion and damage resistance of the fabric jacket. Storage Store in clean and dry environment or protect from
The manufacturing process ensures a tightly packed fill material for moisture prior to installation.
optimum durability and performance. The synthetic jacket and Unlimited shelf life.
protective braiding make the product ideal for installation through
trenching or directional drilling. Ordering Information
Linear Anode Products Maximum Output
Key Features & Benefits: Anodeflex 3020 20 mA/ft. / 66 mA/m
• Anode is in close proximity to the pipeline Anodeflex 3100 100 mA/ft. / 328 mA/m
• Distributes current uniformly over total length of pipeline Anodeflex 3200 200 mA/ft. / 656 mA/m
• No over or under protection Accessory Products Application
AFLX UNI-TEE Tee splice kit
• Prevents accelerated coating disbondment
AFLX UNI-SPLICE In-line splice kit
• More effective & economical than a series of discrete anodes
AFLX UNI-CAP End cap kit
• Independent of variations in soil resistivity
• Pipeline Rehabilitation without excavation Other Information
• A fraction of the cost of recoating Documentation Extensive information is available on our
• No loss of revenue or supply interruptions website. Design considerations and other
• No safety problems associated with working on live lines documentation may be obtained by contacting
• Long continuous circuit lengths your local distributor or by sending email to
• 90% fewer joints compared to conventional anode systems [email protected]
• Low maintenance cost Ordering Specify wire gauge (A), cable length (B).
• Avoids interference and stray current problems Information Standard pigtail length (C) is 24” on each end.
• Enhances long-term performance
• Focuses current on the target structure
• Improves protection and cost efficiency Assembly Schematic
• Pre-packaging carbon backfill
C1 B C2
• Loresco SC-3 product (or approved alternate)
• Ensures low resistance ground bed all the time
• Ensures the MMO anode & cable is centered
• Simplifies field installation, fast & cost effective
• Installation with standard cable laying equipment A

PDS Anodeflex 3000-Ti V November 2020 (EN) Page 1 / 2

PRODUCT DATA SHEET ANODEFLEXTM 3000-Cu Series

Typical Performance Properties

Component / Property Test Method Typical Value
Copper Conductor
Dimensions ASTM B263 AWG # 8 or #6
Resistance ASTM B193 1.5 x 103 Ohm-cm
Mixed Metal Oxide Wire
Wire size (diameter) Measured 1.5mm
Wire types Internal Titanium clad copper core
Maximum current (20 year life) Internal 20 – 200 mA/ft.
66 – 656 mA/m
Carbon Backfill
Bulk density ASTM D3172 74lbs/ft3
Fixed carbon ASTM D3172 99.35%
Ash ASTM D3172 <0.5%
Fabric Jacket
Weight Measured Min. 200 g/m2
Bursting strength ISO 3303 575N
Abrasion resistance ASTM D4157 219 cycles
Fluid resistance Internal 6 months immersion Pass
Chlorine resistance Internal 6 months immersion Pass

Abrasion-resistant Outer
Carbon Backfill
Braiding

AWG #8/#6 Dual-Insulation

Copper Conductor

1.5mm Titanium-Core
MMO Anode

Acid-resistant
Fabric

Specification language

Anodeflex 3000-Ti series products are long-line, flexible cable-like anode placed in continuous close proximity to the target structure. Uniform distribution of cathodic
protection current achieved on applications where many conventional anode ground beds will not work or are difficult to install.

Product performance a result of the central insulated copper conductor, which allows current to flow long distances down the center conductor, and mixed-metal
oxide (MMO) anode connected at regular intervals to the conductor cable. The mixed metal oxide is a crystalline, electrically-conducive coating that activates the
titanium cladding and enables it to function as an anode. When applied on titanium, the coating has an extremely low consumption rate, measure in milligrams per
year. System design should consider environmental factors such as adjacent structures, stray current and fluctuations in soil resistivity.

In contrast to conventional ground bed systems, Anodeflex 3000-Ti series products are placed in the ground in close proximity to the steel surface to be protected and
provides uniform distribution of protective current to the entire steel surface. This maintains the steel-to-soil "instant-off" potential in the required window of -
850mv and -1200mv. The improved current distribution increases anode efficiency and helps prevent over-voltage problems such as hydrogen generation and
associated rapid coating disbondment. In addition, interference from other structures and stray currents are virtually eliminated.

Anodeflex 3000-Ti series products are delivered on long length spools and, because no additional carbon backfill is required, the installation is as simple as laying a low
voltage power cable. Proven heat-shrinkable splice kits, Tee joints and end sealing caps are available to complete the installation.

Seal For Life Industries Mexico S de R.L. de C.V. Seal For Life Industries - Stopaq B.V. Seal For Life Industries BVBA Seal For Life India Private Ltd.
Tijuana, Mexico Stadskanaal, the Netherlands Westerlo, Belgium Baroda, India
USA Tel: +1 858 633 9797 Tel: +31 599 696 170 Tel: +32 14 722 500 Tel: +91 2667 264 721
Mx Tel: +52 664 607 9105 Fax: +31 599 696 177 Fax: +32 14 722 570 Fax: +91 2667 264 724
[email protected] [email protected] [email protected] [email protected]
Stopaq® - Covalence® - Polyken® - Powercrete® - AnodeflexTM
DISCLAIMER: Seal For Life Industries warrants that the product conforms to its chemical and physical description and is appropriate for the use stated on the technical data sheet when used in compliance with Seal For Life Industries’ written instructions. Because many
installation factors are beyond the control of Seal For Life Industries, the user shall determine the suitability of the products for the intended uses and assume all risks and liabilities in connection herewith. Seal for Life’s liability is stated in its General Terms and
Conditions of Sale. Seal For Life Industries makes no other warranty either express or implied. All information contained in this technical data sheet is to be used as a guide and is subject to change without notice. This technical data sheet supersedes all previous data
sheets on this product.

PDS Anodeflex 3000-Ti V November 2020 (EN) Page 2 / 2