Scribd
Upload
819 views2 pages

Converter 20A 300W Step Up Step Down Buck Boost DC-DC

The document describes a 300W step up/step down DC-DC converter with an input voltage range of 6-40V and output voltage range of 1.2-36V. It can output up to 20A continuously and has an efficiency of up to 96% when stepping 24V down to 12V at 20A. The converter uses large 75V/80A MOSFETs and has screw terminals for easy wiring of high current connections.

Uploaded by

kpekar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
819 views2 pages

Converter 20A 300W Step Up Step Down Buck Boost DC-DC

The document describes a 300W step up/step down DC-DC converter with an input voltage range of 6-40V and output voltage range of 1.2-36V. It can output up to 20A continuously and has an efficiency of up to 96% when stepping 24V down to 12V at 20A. The converter uses large 75V/80A MOSFETs and has screw terminals for easy wiring of high current connections.

Uploaded by

kpekar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 2

Converter 20A 300W Step up Step down Buck Boost DC-DC

Features:
With a wide input voltage range from 6V to 40V, the step-down converter can accurately adjust output
voltage and current.
The efficiency can be up to 96%, measured at 20A, converting 24V to 12V.
It is designed with 75V/80A large current dual MOS tube.
Input and output use high frequency low resistance electrolytic capacitor, low ripple, stable output.
Wiring is convenient with these large current 30A screw terminals.
The buck module has 2 heat sink that could enhance heat dissipation.
When there is a big difference between input and output voltage, please decrease power and current.

Specifications:
Input Voltage: 6V to 40V DC(10V to 40V is suggested)
Output Voltage: 1.2V to 36V DC
Output Current: 20A(max.), 15A(suggested)
Efficiency: 95%(24V to 12V, 20A)
Output Ripple: ≤50mV
Wiring Method: Terminal
Short Circuit Protection: Self-recovery(cannot short circuit for long time)
Size: 60 x 53 x 27mm / 2.36 x 2.08 x 1.06"

VO+: Output positive


VO-: Output negative
+IN: Input positive
-IN: Input negative
CV: Output voltage adjustment
CC: Output current adjustment
EN: Enable, low voltage level shut off output; suspension, high voltage level is effective
When input and output is common grounded, no-load CV output constant voltage,CC output constant
current

You might also like