Scribd
Upload
628 views1 page

Checklist Alarm Check Valve

This document is a quarterly inspection and testing checklist for an alarm check valve. It contains instructions to follow work permit procedures, use calibrated equipment, and refer to manuals. The checklist includes 5 items to inspect and test the alarm check valve, such as verifying components are in position and undamaged, opening a test valve to actuate alarms, and cleaning strainers. Technicians and clients must sign off to confirm works are completed and the system is in a fault-free condition.

Uploaded by

Muhammad Zafarullah Sialvi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
628 views1 page

Checklist Alarm Check Valve

This document is a quarterly inspection and testing checklist for an alarm check valve. It contains instructions to follow work permit procedures, use calibrated equipment, and refer to manuals. The checklist includes 5 items to inspect and test the alarm check valve, such as verifying components are in position and undamaged, opening a test valve to actuate alarms, and cleaning strainers. Technicians and clients must sign off to confirm works are completed and the system is in a fault-free condition.

Uploaded by

Muhammad Zafarullah Sialvi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

FLAMEX GENERAL TRADING L.L.

C
Tel.: 00971 - 4- 2511457, Fax: 00971 - 4 - 2511458
P.O.Box: 233704 - Dubai - United Arab Emirates
[email protected], www.flamexexperts.com

Quarterly Inspection & Testing Checklist for Alarm Check Valve


Project Title Date:

Yes No
Witnessed
Technician:
by client
Area/Location:

IMPORTANT NOTES:
1. Follow the work permit procedure before starting the work.
2. Ensure use of Calibrated Inspection & Test Equipment - IMTE.
3. Refer to manufacture manual for maintenance of system components.
4. Ensure housekeeping is done after completion of the works.
5. Ensure the system is handed over in fault free condition and witnessed by client /
check list signed off.
I = Inspection T = Testing M = Maintenance = OK = Not OK NA = Not Applicable
SR # CHECKS DESCRIPTION   N/A
Carry out physical inspection of the alarm check valve.
Verify that all the alarm check valve is in proper position as
1.
per the requirement of the system and no damage has
taken place to any component.
Open the alarm test valve and verify that the sprinkler
alarm bell and/or the pressure alarm switch properly
2.
I actuate. Close the alarm test valve and verify that water has
ceased to flow from the alarm line drain.

3. Clean the strainer provided on the sprinkler alarm bell line.

4. Clean the strainer of restriction assembly.


5. Inspect the check valve clapper located on the bypass line.
Comments:

CONTRACTOR CLIENT
Name Name
Designation Designation
Signature Signature
Date Date

You might also like