Dolphin™ 75e

powered by Android 4.4

User’s Guide
Disclaimer
Honeywell International Inc. (“HII”) reserves the right to make changes in specifications and other information contained in this
document without prior notice, and the reader should in all cases consult HII to determine whether any such changes have been
made. The information in this publication does not represent a commitment on the part of HII.
HII shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages
resulting from the furnishing, performance, or use of this material. HII disclaims any and all responsibility and liability for the
selection and use of software and/or hardware to achieve intended results.
This document contains proprietary information that is protected by copyright. All rights are reserved. No part of this document
may be photocopied, reproduced, or translated into another language without the prior written consent of HII.
Web Address: www.honeywellaidc.com

Trademarks
Android, Google, and other marks are trademarks of Google Inc.
Microsoft, Windows are either registered trademarks or registered trademarks of Microsoft Corporation in the United States
and/or other countries.
The Bluetooth trademarks are owned by Bluetooth SIG, Inc., U.S.A. and licensed to Honeywell.
MIFARE Classic is a registered Trademark of NXP B.V.
Other product names mentioned in this manual may be trademarks or registered trademarks of their respective companies and
are the property of their respective owners.

Patents
For patent information, see www.hsmpats.com.

Copyright  2015 Honeywell International Inc. All rights reserved.

 Table of Contents

Customer Support
Product Service and Repair .................................................................................................. ix
Contacting Customer Support ............................................................................................... ix
Limited Warranty ................................................................................................................... ix
Warranty Disclaimer: Proper Use of a Touch Screen Mobile Device .................................... ix
How to Extend Your Warranty .............................................................................................. ix

Chapter 1 - Getting Started

Out of the Box ......................................................................................................................1-1
Memory Card Specifications ..........................................................................................1-1
Initial Setup for Dolphin 75e Terminal ..................................................................................1-1
Customizing Home and Accessing Apps .............................................................................1-6
Accessing the Notification Panel from the Status Bar..........................................................1-7
Common Status and Notification Icons ..........................................................................1-7
Search Bar .....................................................................................................................1-8
Personalizing the Home Screen Panels and Favorites Tray..........................................1-9
Navigation/Function Buttons ................................................................................................1-9
Remap a Button Function ............................................................................................1-10
Virtual Keyboard ................................................................................................................1-10
Using the Virtual Keyboard ..........................................................................................1-10
Turning Power On/Off ........................................................................................................1-10
Turning Sleep Mode (Suspend Mode) On/Off ...................................................................1-10
Turning Airplane Mode On/Off ...........................................................................................1-11
Replacing the Battery.........................................................................................................1-11
Restarting the Terminal......................................................................................................1-12
Entering Safe Mode for Troubleshooting .....................................................................1-12
Resetting the Terminal .......................................................................................................1-13
Connecting the Terminal to a Computer (PC) via a USB Connection................................1-13
Using the File Browser Power Tool on the Terminal..........................................................1-14
Enabling or Disabling File Auto Install ...............................................................................1-14
Installing Upgrades ......................................................................................................1-15

Chapter 2 - Hardware Overview

Standard Configuration for the Dolphin 75e.........................................................................2-1
Peripherals for the Dolphin 75e ...........................................................................................2-1
Accessories for the Dolphin 75e ..........................................................................................2-2
Holsters (Model HOLSTER-2 and 6000-HOLSTER) .....................................................2-2
Wrist Lanyard (Model SL-LANYARD-1) .........................................................................2-2
Stylus (Model 75e-Stylus) ..............................................................................................2-2
Battery Door Kits ............................................................................................................2-2
Battery (Models 70e-BTSC and 70e-BTEC) ..................................................................2-2
Features of the Dolphin 75e.................................................................................................2-3
Front, Bottom, and Right Panels ....................................................................................2-3
Back, Top, and Left Panels ............................................................................................2-6
The I/O Connector ...............................................................................................................2-8

iii
 Battery ................................................................................................................................. 2-9
Replacement Battery Specifications .............................................................................. 2-9
Invalid Battery Error Message ....................................................................................... 2-9
Charging Options........................................................................................................... 2-9
Charging Times ............................................................................................................. 2-9
Understanding and Changing the Battery Charge Status LED Indicator..................... 2-10
Important Charging Guidelines .................................................................................... 2-10
Checking the Battery Health ........................................................................................ 2-11
Managing Battery Power ............................................................................................. 2-11
Storing Batteries .......................................................................................................... 2-12
Guidelines for Battery Pack Use and Disposal ............................................................ 2-12
System Resets .................................................................................................................. 2-12
Hardware Maintenance ..................................................................................................... 2-12
Installing a Memory Card or NFC SIM Card...................................................................... 2-12
Installation and/or Replacement .................................................................................. 2-13

Chapter 3 - Using the Scan Image Engine

Overview.............................................................................................................................. 3-1
Image Engine Specifications ............................................................................................... 3-1
Field of View .................................................................................................................. 3-1
Depth of Field ................................................................................................................ 3-1
Supported Bar Code Symbologies ............................................................................... 3-2
Decoding ............................................................................................................................. 3-2
Scan Wedging ............................................................................................................... 3-2
Changing the Scan Settings of the Default Profile......................................................... 3-3
Adding a Scanning Profile ............................................................................................. 3-6
Using the Scan Demo to Decode a Bar Code ............................................................... 3-6
Configuring the Scan Demo Application ........................................................................ 3-7
Using the Demo to Save a Picture for Troubleshooting................................................. 3-8
Aiming Beam ................................................................................................................. 3-8
Capturing Images ................................................................................................................ 3-8
Using the IQ Image Demo to decode intelligent bar codes and capture images........... 3-9
Using the Signature Demo........................................................................................... 3-10
Uploading Images.............................................................................................................. 3-10

Chapter 4 - Using the Color Camera

Overview.............................................................................................................................. 4-1
Opening the Camera app and Adjusting the Settings ......................................................... 4-1
Adjusting the Camera/Video Settings ............................................................................ 4-1
Taking a Photo .................................................................................................................... 4-1
Taking a Panoramic Photo .................................................................................................. 4-2
Uploading Pictures and Videos ........................................................................................... 4-3

Chapter 5 - Settings
Overview.............................................................................................................................. 5-1
Wireless & Network Settings ............................................................................................... 5-1

iv
 Device Settings.................................................................................................................... 5-1
Changing the Sound Settings ........................................................................................ 5-1
Changing the Display Settings....................................................................................... 5-2
Viewing Storage Statistics ............................................................................................. 5-2
Changing the Battery Settings ....................................................................................... 5-2
Managing Apps.............................................................................................................. 5-3
Personal Settings ................................................................................................................ 5-3
Enabling or Disabling Location Service ......................................................................... 5-3
Managing Security ......................................................................................................... 5-4
Language & input ................................................................................................................ 5-5
Changing the Display Language.................................................................................... 5-5
Activating Spell Check ................................................................................................... 5-5
Managing the Personal Dictionary................................................................................. 5-5
Changing the Keyboard & Input Methods...................................................................... 5-5
Customizing the Optional Enhanced Keyboard ............................................................. 5-6
Adjusting the Sensitivity and Speed of the Touch Panel Response .............................. 5-7
Backup & reset .............................................................................................................. 5-7
Honeywell Settings .............................................................................................................. 5-7
Key Remapping ............................................................................................................. 5-7
Modifying the Smart Sensors......................................................................................... 5-7
Changing the Battery LED Functionality........................................................................ 5-7
Viewing the Battery Health ............................................................................................ 5-7
Activating the Logger ..................................................................................................... 5-7
Scanning........................................................................................................................ 5-8
Web applications ........................................................................................................... 5-8
Accounts.............................................................................................................................. 5-8
Adding or Modifying an IMAP or Corporate Exchange Account .................................... 5-8
System................................................................................................................................. 5-8
Setting the Date & Time................................................................................................. 5-8
Customizing Services and System Features for Accessibility ....................................... 5-9
Enabling Developer Options .......................................................................................... 5-9
About Phone .................................................................................................................. 5-9

Chapter 6 - Communication
Wireless & Networks Settings ............................................................................................. 6-1
Connecting the Terminal to a Wireless Network ................................................................. 6-1
Wi-Fi Network Connections ................................................................................................. 6-2
Turning Wi-Fi Networking On or Off .............................................................................. 6-2
Connecting to a Wi-Fi Network ...................................................................................... 6-2
Receiving Network Notifications .................................................................................... 6-2
Adding a Wi-Fi Network ................................................................................................. 6-2
Advanced Wi-Fi Settings and Network Utilities ................................................................... 6-3
Advanced Wi-Fi Menu ................................................................................................... 6-3
Wi-Fi Radio Settings Power Tool......................................................................................... 6-3
Modifying Station Mode and AP Mode Configurations .................................................. 6-3
Viewing General Wi-Fi Info.................................................................................................. 6-3
Airplane Mode ..................................................................................................................... 6-4

v
 Virtual Private Networks (VPN) ........................................................................................... 6-4
Adding a VPN Profile ..................................................................................................... 6-4
Connecting to a VPN ..................................................................................................... 6-4
Disconnecting from a VPN............................................................................................. 6-4
Editing or Deleting a VPN Profile................................................................................... 6-4
Working with Certificates ..................................................................................................... 6-5
Installing a Certificate .................................................................................................... 6-5
Viewing, Disabling, or Removing Certificates ................................................................ 6-5
Ethernet Communication ..................................................................................................... 6-6

Chapter 7 - Working with Bluetooth and NFC Technology

Bluetooth Technology.......................................................................................................... 7-1
Turning the Bluetooth Radio On or Off .......................................................................... 7-1
Pairing and Trusted Devices.......................................................................................... 7-1
Connecting to Other Bluetooth Devices......................................................................... 7-1
Configuring or Unpairing Bluetooth Devices.................................................................. 7-1
Making the Terminal Discoverable ................................................................................ 7-1
Bluetooth Menu Options ................................................................................................ 7-2
Sharing Pictures and Video ........................................................................................... 7-2
Near Field Communication (NFC) Technology.................................................................... 7-3
Hardware Requirements................................................................................................ 7-3
Security Recommendation............................................................................................. 7-3
NFC Settings ................................................................................................................. 7-3
Reading NFC Tags ........................................................................................................ 7-4
Transferring screen content via NFC............................................................................. 7-4
Using the NFC Demos................................................................................................... 7-4

Chapter 8 - Dolphin 70e Black HomeBase (Model 70e-HB)

Overview.............................................................................................................................. 8-1
Unpacking the HomeBase................................................................................................... 8-1
Optional Equipment ....................................................................................................... 8-1
Charging Overview .............................................................................................................. 8-1
Convenient Storage............................................................................................................. 8-1
Capacity............................................................................................................................... 8-2
Dimensions.......................................................................................................................... 8-2
Weight ................................................................................................................................. 8-2
Parts and Functions............................................................................................................. 8-3
Front Panel ................................................................................................................... 8-3
Back Panel ......................................................................................................................... 8-4
Bottom Panel ....................................................................................................................... 8-4
Power .................................................................................................................................. 8-4
Connecting Power to the HomeBase .................................................................................. 8-5
Charging the Main Battery................................................................................................... 8-5
Charging a Spare Battery in the Auxiliary Battery Well ....................................................... 8-5
Communication.................................................................................................................... 8-6
Requirements ................................................................................................................ 8-6
Establishing USB Communication ................................................................................. 8-6

vi
 Mounting the HomeBase ..................................................................................................... 8-6
Optional DIN Rail Mount ................................................................................................ 8-6
Additional Hardware ...................................................................................................... 8-6
Installing the DIN Rail .................................................................................................... 8-7

Chapter 9 - Dolphin 70e Black eBase (Model 70e-EHB)

Overview.............................................................................................................................. 9-1
Unpacking the eBase .......................................................................................................... 9-1
Optional Equipment ....................................................................................................... 9-1
Charging Overview .............................................................................................................. 9-1
Convenient Storage............................................................................................................. 9-1
Capacity............................................................................................................................... 9-1
Dimensions.......................................................................................................................... 9-2
Weight ................................................................................................................................. 9-2
Parts and Functions............................................................................................................. 9-2
Front Panel .................................................................................................................... 9-2
Back Panel ......................................................................................................................... 9-3
Bottom Panel ....................................................................................................................... 9-4
Power .................................................................................................................................. 9-4
Connecting Power to the eBase .......................................................................................... 9-5
Charging the Main Battery................................................................................................... 9-5
To Power a Terminal and Charge its Main Battery.............................................................. 9-5
Charging a Spare Battery in the Auxiliary Battery Well ...................................................... 9-5
Communication.................................................................................................................... 9-6
Establishing Ethernet Communication........................................................................... 9-6
Establishing USB Communication ................................................................................. 9-7
Mounting the eBase............................................................................................................. 9-7

Chapter 10 - Dolphin 70e Black Mobile Base (Model 70e-MB)

Overview............................................................................................................................ 10-1
Charging Overview ............................................................................................................ 10-1
Convenient Storage........................................................................................................... 10-1
Dimensions........................................................................................................................ 10-1
Weight ............................................................................................................................... 10-1
Mobile Base Components ................................................................................................ 10-2
Adjustable Arm with Suction Cup Base for Windshield Mounting ..................................... 10-2
Mounting the Mobile Base ................................................................................................. 10-3
Safety Precautions....................................................................................................... 10-3
Installation.................................................................................................................... 10-3
Charging the Main Battery................................................................................................. 10-4
To Power a Terminal and Charge its Main Battery...................................................... 10-5
Removing the Cable .......................................................................................................... 10-6

Chapter 11 - Dolphin 70e Black ChargeBase (Model 70e-CB)

Overview............................................................................................................................ 11-1
Unpacking the ChargeBase............................................................................................... 11-1
Charging Overview ............................................................................................................ 11-1

vii
 Convenient Storage........................................................................................................... 11-1
Capacity............................................................................................................................. 11-1
Dimensions........................................................................................................................ 11-2
Weight ............................................................................................................................... 11-2
Parts and Functions........................................................................................................... 11-2
Front Panel .................................................................................................................. 11-2
Dock LEDs................................................................................................................... 11-2
Back Panel ........................................................................................................................ 11-3
Power Supply Connector ............................................................................................. 11-3
Bottom Panel ..................................................................................................................... 11-3
Power ................................................................................................................................ 11-3
Connecting Power to the ChargeBase ....................................................................... 11-4
Charging the Main Battery ........................................................................................... 11-4
To Power a Terminal and Charge its Main Battery...................................................... 11-4
Mounting the ChargeBase................................................................................................. 11-4
Optional DIN Rail Mount .............................................................................................. 11-5
Additional Hardware .................................................................................................... 11-5
Installing the DIN Rail .................................................................................................. 11-5

Chapter 12 - Dolphin 70e Black Net Base (Model 70e-NB)

Unpacking the Net Base.................................................................................................... 12-1
Optional Equipment ..................................................................................................... 12-1
Charging Overview ............................................................................................................ 12-1
Convenient Storage........................................................................................................... 12-1
Capacity............................................................................................................................. 12-1
Dimensions........................................................................................................................ 12-2
Weight ............................................................................................................................... 12-2
Parts and Functions........................................................................................................... 12-2
Front Panel .................................................................................................................. 12-2
Bottom Panel ..................................................................................................................... 12-4
Power ................................................................................................................................ 12-4
Connecting Power to the Net Base.............................................................................. 12-4
Charging the Main Battery ........................................................................................... 12-4
To Power a Terminal and Charge the Main Battery .................................................... 12-4
Communication.................................................................................................................. 12-5
Establishing Ethernet Communication......................................................................... 12-5
Bottom Panel ............................................................................................................... 12-6
Optional DIN Rail Mount .............................................................................................. 12-6
Additional Hardware .................................................................................................... 12-6
Installing the DIN Rail .................................................................................................. 12-7

Appendix A - Dolphin 75e Terminal Agency Information

Label Locations ...................................................................................................................A-1
Model Number and Serial Number ................................................................................A-1
RF Exposure Information (SAR)..........................................................................................A-1

viii
 Customer Support

Product Service and Repair

Honeywell International Inc. provides service for all of its products through service centers throughout the world. To find your
service center, go to www.honeywellaidc.com and select Support > Contact Support > Service and Repair. Contact your
service center to obtain a Return Material Authorization number (RMA #) before you return the product. To obtain warranty or
non-warranty service, return your product to Honeywell (postage paid) with a copy of the dated purchase record.
For ongoing and future product quality improvement initiatives, the terminal comes equipped with an embedded device lifetime
counter function. Honeywell may use the lifetime counter data for future statistical reliability analysis as well as ongoing quality,
repair and service purposes.

Contacting Customer Support

To search our knowledge base for a solution or to log in to the Technical Support portal and report a problem, go to
www.hsmcontactsupport.com.
For our latest contact information, see www.honeywellaidc.com/locations.

Limited Warranty
For warranty information, go to www.honeywellaidc.com and click Resources > Warranty.
The limited duration of the warranty for the Dolphin 75e is as follows:
• The duration of the limited warranty for terminals with an integrated imager is one year.
• The duration of the limited warranty for touch screens is one year.
The duration of the limited warranty for batteries is one year. Use of any battery from a source other than Honeywell may result
in damage not covered by the warranty. Batteries returned to Honeywell International Inc. in a reduced state may or not be
replaced under this warranty. Battery life will be greatly increased when following the battery instructions in this user's guide.
The duration of the limited warranty for the Dolphin 70e Black HomeBase, Dolphin 70e Black eBase, Dolphin 70e Black Net
Base, Dolphin 70e Black Mobile Base, Dolphin 70e Black ChargeBase, and the Common QuadCharger is one year.

Warranty Disclaimer: Proper Use of a Touch Screen Mobile Device

If your device has a touch screen display, please note that a touch screen responds best to a light touch from the pad of your
finger or a Honeywell approved stylus. Using excessive force or a metallic object when pressing on the touch-screen may cause
damage to the tempered glass surface and may not be covered by the product's warranty.

How to Extend Your Warranty

Honeywell International Inc. offers a variety of service plans on our hardware products. These agreements offer continued
coverage for your equipment after the initial warranty expires. For more information, contact your Sales Representative,
Customer Account Representative, or Product Service Marketing Manager from Honeywell International Inc., or your Authorized
Reseller.

ix
x
1
Getting Started

Out of the Box

Verify that the carton contains the following items:
• Dolphin 75e handheld computer (terminal)
• 1 GB, 2 GB or 4 GB industrial grade microSD™ memory card (optional)
• Rechargeable 3.7V Li-ion battery
• USB charge/communication cable
• Power adapter with regional plug adapters
• Product documentation
If you ordered accessories for your terminal, verify that they are also included with the order. Be sure to keep the original
packaging in case you need to return the Dolphin terminal for service.

Memory Card Specifications

Honeywell recommends the use of Single Level Cell (SLC) industrial grade microSD or microSDHC™ memory cards with
Dolphin terminals for maximum performance and durability. Contact a Honeywell sales representative for additional
information on qualified memory card options.

Initial Setup for Dolphin 75e Terminal

Step 1. Install the Battery
Before installing the main battery, read the Guidelines for Battery Pack Use and Disposal on page 2-12.
The terminal is shipped with the battery packaged separate from the unit. To install the battery, follow the installation steps
illustrated. For information on how to remove the battery, see Replacing the Battery on page 1-11.

Ensure all components are dry prior to placing the battery in the terminal. Mating wet components may cause
! damage not covered by the warranty.
We recommend use of Honeywell Li-ion battery packs. Use of any non-Honeywell battery may result in damage
not covered by the warranty.

Important: All battery and connector doors must be present, undamaged, and properly closed to maintain the
environmental rating of the terminal.
Note: Standard battery and standard battery door shown.

1
Battery Door Lock

1-1
 4
3

5
Apply pressure to the edges of the
battery door before engaging the lock to
ensure the door is properly closed.

6
Step 2. Charge the Battery
The power source for the Dolphin terminal is the 3.7V Li-ion rechargeable battery located under the battery door on the
back panel of the device. See Battery on page 2-9 for additional information on battery storage, use, and disposal.
Important: Removing the battery from the terminal erases all non-persistent memory. Always power off the terminal before
removing the battery. For information on how to remove the battery from the terminal, see Replacing the Battery
on page 1-11.
Before Initial Use
Dolphin terminals ship with the battery significantly discharged of power. After installing the battery in the terminal, charge
the battery with a Dolphin 75e compatible charging peripheral for a minimum of 4 hours for the standard battery pack or
6 hours for the extended battery pack. When using the 70e-USB Charge/Communication cable to charge from a 500mA
USB port on a host device, charge the battery for a minimum of 6 hours for the standard battery and 8 hours for the
extended battery.
Note: Inadequate source current may interfere with effective battery charging; see Important Charging Guidelines on page
2-10 for additional information.

We recommend use of Honeywell peripherals, power cables, and power adapters. Use of any non-Honeywell
! peripherals, cables, or power adapters may cause damage not covered by the warranty.

Dolphin 75e model terminals are designed for use with the following charging devices and cables: 70e-HB, 70e-CB,
70e-EHB, 70e-NB, 70e-MB, 70e-MC, and 70e-USB ADAPTERKIT. See pages 2-1 and 2-2 for additional information on
peripherals and accessories.

Ensure all components are dry prior to mating terminals/batteries with peripheral devices. Mating wet
! components may cause damage not covered by the warranty.

1-2
Using the USB Charge/Communication Cable (Model 70e-USB ADAPTERKIT)
Dolphin 75e terminals ship with a USB Charge/Communication Cable and a power adapter with regional plug
adapters. The USB Charge/Communication cable provides two options for charging the terminal. Use the cable in
conjunction with the provided power supply adapter and plug adapter to charge the terminal from a power outlet
(Option 1) or connect the cable to a high-power USB port to charge from a host device (Option 2).
Warning: The terminal shall only be connected to CTIA certified adapters, products that bear the USB-IF logo or
products that have completed the USB-IF compliance program when using the micro USB port as a
charging source.
Option 1: Charging from a power outlet
Use only a UL Listed power supply, which has been qualified by Honeywell with an output rated at 5VDC and 1A with
the device.

1
Micro USB Port
5
Right Side Panel
of the Terminal

2
USB Door
3
4
Plug Adapter

USB Charge/Communication Cable

Power Adapter

Option 2: Charging from a high power USB port on a host device (PC)
Charging the battery through a USB port takes more time than direct charging using the provided power supply.
Inadequate source current may lengthen the charge time or prevent the battery from charging if the terminal is drawing
more current than supplied by the USB port. The maximum current supplied by a USB Host can vary from 100mA to
500mA. Do not attempt to charge the terminal from a 100mA source. An active Dolphin terminal uses more current
than supplied by a 100mA source causing the terminal to continue to draw power from the battery. See Important
Charging Guidelines on page 2-10 for additional information.

Touch All Apps > Settings > Battery to verify the battery is charging.
Note: Placing the terminal in Sleep (Suspend) mode while charging reduces the current draw of the terminal and
shortens the charging time of the battery.

1 Micro USB Port

USB Door

Right Side Panel

of the Terminal
3
USB Port

2
USB Charge/Communication Cable

1-3
 Step 3. Power On the Terminal and Install Update
Important: Follow the power up instructions below the first time you turn On the Dolphin terminal.
1. Verify the terminal is either connected to an AC power source or the battery is fully charged.
2. Press the Power button. When the Honeywell logo appears and the right green LED turns On, press and hold both the
Volume Up and Home buttons at the same time.

Power Volume Up
(top) (side)

Power (top) Volume Up (side)

If the terminal shuts down, repeat step 2.

3. Release the buttons when the green LED turns off. After approximately 30 seconds, the system update screen appears.
When the system update is finished, the lock screen appears (see page 1-5).

Do not remove battery during update!

Once the initial update is complete, you do not need to repeat the above steps when powering up the terminal. You can use
the Power button to turn the terminal On. For more information on the power button functions, see page 1-10.

1-4
Step 4. Unlock the Screen

Drag the to the edge of the screen or press the Menu button to unlock the terminal and access the Home screen.
For information on customizing the security feature, see Setting up a Screen Lock on page 5-4.

1-5
Customizing Home and Accessing Apps
Home is the first screen you see once the terminal is turned on and unlocked. Swipe left or right on the Home screen to scroll
between five customizable panels. You can personalize the panels with your choice of shortcuts, apps, folders and widgets. The
Favorites tray, located at the bottom of the screen, is visible from any of the five Home screen panels. You can modify the apps
in the Favorites tray to include the apps you use most. To learn how, see Personalizing the Home Screen Panels and Favorites
Tray on page 1-9.

If you want to view all the apps and widgets available on the terminal, touch All Apps in the Favorites tray. From the All
Apps screen, select either APPS or WIDGETS.
Notifications and status indicators appear at the top of the screen. Notifications appear on the left, status indicators for various
system functions on the right with the current time. For information on how to view notification details, see Accessing the
Notification Panel from the Status Bar on page 1-7.

You can press the Home button on the front of the terminal to return to the Home screen from any open app.

Home
Notification/Status Bar

Search Bar

Clock Widget

Main Home screen

Panel

Camera App Shortcut

Favorites Tray

All Apps

1-6
Accessing the Notification Panel from the Status Bar
To view additional details about a notification, touch and hold the status bar at the top of the screen and then drag down. The
notification panel provides quick access to all your notifications.
• Touch any notification to open the related app and access additional settings or information.

• Select to access the quick settings screen. To the return to the notifications screen, select .

• Select to dismiss all the notifications listed. Swipe left or right on a single notification to dismiss only that notification.

To close the notification panel, swipe up from the bottom of the screen.

Notification Panel Quick Settings

Common Status and Notification Icons

Notifications and status indicators appear at the top of the screen.

Notifications on the Left Status and Time on the Right

Icon Meaning Icon Meaning

Note: Notification and status icons are hardware and software dependent. Some of the icons listed below may not be
relevant for your Dolphin model.
Pending calender event Sound is turned off

1-7
 Icon Meaning Icon Meaning

Pending alarm and Alarm is set Vibrate mode is turned on

New text message or multimedia message Battery charge is at 100%

Error with text or multimedia message delivery Terminal is connected to external power and the
battery is charging.
New E-mail Airplane mode is turned on

Terminal is connected to a computer using a USB Terminal paired to a device with Bluetooth
cable technology
ABD active (USB debugging enabled) Bluetooth technology is turned on

Uploading data Bluetooth incoming file notification

Downloading data Wi-Fi network connected with full signal signal

strength
Download finished Wi-Fi network connected but no signal signal
strength
Synchronizing data Ethernet status - disconnected

Error with sync or sign-in Ethernet status - connected

The terminal could not synchronize data with the SD card or USB storage is full
computer
GPS is turned on

Receiving location data from GPS

Search Bar
You can search for an item on the terminal or Internet using Google™ Search at the top of any Home screen panel. An
active Internet connection is required.

Touch inside the box to

access the virtual keyboard
for text entry.

1-8
 Personalizing the Home Screen Panels and Favorites Tray
Streamline your work flow by customizing the Home screen panels and Favorites tray with your choice of app shortcuts,
folders, and widgets.
To add an app shortcut or widget:

1. Touch All Apps .

2. Touch APPS or WIDGETS.
3. Touch and hold the app icon or widget you want to add. The terminal vibrates, and then switches to the Home screen.
4. Drag and drop the app icon or widget into position on one of the panels. You can also drag the app into an open spot on
the Favorites tray.
Hints:
• To create a folder, drag and drop an app icon on top of another icon.
• To move a shortcut from the Favorites tray to the Home screen panel, touch and hold the item, and then drag and
drop the icon onto the panel.

To remove/delete an item:
1. Touch and hold the item.
2. Drag the item to the top of the screen where the word Remove is displayed.
To move an item:
1. Tap and hold the item.
2. When the unit vibrates, drag and drop the item in the new location.
Note: The next panel automatically opens if you drag the item to the edge of the touchscreen.

Navigation/Function Buttons
The Dolphin terminal has seven navigation/function buttons.

Button Function

Back Back to the previous screen.

Menu Opens additional menu options.

Wakes the terminal from Sleep mode (Suspend mode).

Triggers the scanner/imager in the following apps: IQ Image Demo and Scan Demo.
Scan
Triggers the scanner/imager when scan wedging is enabled (default setting). For information on
modifying the scan wedge feature see page 3-2.
View and switch between recently used apps. Touch the app thumbnail to open the app or
Recent Apps
swipe the thumbnail left or right to remove it from the list.

Home Return to the Home screen.

Triggers the scanner/imager in the following apps: IQ Image Demo and Scan Demo.
Right & Left
Side Triggers the scanner/imager when scan wedging is enabled (default setting). For information on
modifying the scan wedge feature see page 3-2.

1-9
Button Function

Back Back to the previous screen.

Volume Raises or lowers the volume of the active speaker.

Remap a Button Function

You can change the default function of the Scan, Left and Right side buttons.

1. Touch All Apps > Settings > Key remap.

2. Select the button to remap (i.e., LeftScan, RightScan, BottomScan).
3. Touch KEYS or APPS to view the available functions.
4. Select the function you want assigned to the button.
For information on the button locations on the terminal, see Features of the Dolphin 75e on page 2-3.

Virtual Keyboard
The virtual keyboard appears when you open an application or select a field that requires text or numerical input. The content of
the keyboard may vary depending on the application in use and the input field requirements.

Using the Virtual Keyboard

During text input, you may need to switch between keyboard modes to access additional character sets (e.g., function keys,
symbols, and numbers). Each keyboard mode, includes navigation keys, which allow you to quickly switch between modes.
Touch the ABC key to switch to the Qwerty Mode, and the ?123 key to switch to the Numeric Mode. Touch and hold the
comma “,” key to access the settings for input options or the period “.” key to access additional symbols (e.g., @, %, +, &).
See Language & input on page 5-5 for additional information on configuring keyboard & input methods.
Note: The content of the keyboard and the mode initially displayed may vary depending on the application in use and the
input field requirements.

Turning Power On/Off

To turn the terminal On, press and release the Power button .
To turn the terminal Off:

1. Press and hold the Power button until the options menu displays.
2. Touch Power Off.
You should always power off the terminal before removing the battery. For information on removing the battery, see Replacing
the Battery.

Turning Sleep Mode (Suspend Mode) On/Off

Sleep mode automatically turns the touch panel display off and locks the terminal to save battery power when the terminal is
inactive for a programmed period of time.

1. Press and release the Power button to wake the terminal.

2. Drag the to the edge of the display or press the Menu button to unlock the terminal.

1 - 10
To manually place the unit in Sleep mode, press and release the Power button .

To adjust the timeout limit, touch All Apps > Settings > Display > Sleep.

Turning Airplane Mode On/Off

Turn Airplane Mode on to disable all the terminal radios that transmit voice or data.

1. Press and hold the Power button until the options menu displays.

2. Touch Airplane Mode to toggle the mode on or off. When Airplane Mode is turned on, shows on the status bar.

Replacing the Battery

Before replacing the battery, read the Guidelines for Battery Pack Use and Disposal on page 2-12. For battery replacement part
numbers, see Replacement Battery Specifications on page 2-9.

RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. The battery should be disposed of
! by a qualified re-cycler or hazardous materials handler. Do not incinerate the battery or dispose of the battery with
general waste materials.
Ensure all components are dry prior to mating terminals/batteries with peripheral devices. Mating wet components
may cause damage not covered by the warranty.
We recommend use of Honeywell Li-ion battery packs. Use of any non-Honeywell battery may result in damage not
covered by the warranty.

The following illustrations depict a standard battery with a standard battery door; however, battery removal and installation
procedures are the same for the extended battery and extended battery door.
To replace the battery:
1. Power Off the terminal.
2. Unlock and remove the battery door.

Battery Door Lock

1 - 11
3. Pull the battery latch back and remove the battery.

Battery Latch

4. Insert the new battery and install the battery door.

5. Apply pressure to the edges of the battery door to ensure the door is properly closed. Engage the door lock.

6. Press the Power button .

Important: All battery and connector doors must be present, undamaged, and properly closed to maintain the environmental
rating of the terminal.

Restarting the Terminal

You may need to restart the terminal to correct conditions where an application stops responding to the system or the terminal
seems to be locked up.

• Press and hold the Power button until the option menu displays, and then select Reboot.

To perform a restart if the touch panel display is unresponsive:

• Press and hold the Power button for approximately 8 seconds until the terminal starts to reboot. When the reset is
complete, the Lock screen displays.

Note: The Internal storage\honeywell folder on the Dolphin terminal is semi-permanent storage on the terminal. By default, files
in this folder are maintained after a Reboot.

Entering Safe Mode for Troubleshooting

Safe mode disables all third party applications installed on the terminal. To enter enter safe mode, press and hold the Menu

button when the unit is booting, and then select OK when prompted. To exit safe mode reboot the terminal.

1 - 12
Resetting the Terminal
If the terminal completely stops responding, you may need to perform a Factory Reset (Clean Boot). Because a Factory
Reset can result in data loss, use this method only if all other recovery methods have failed. All personal content is erased (e.g.,
emails, pictures, contacts) and factory default settings are restored when a factory reset is performed.

! Caution: A Factory Reset (Clean Boot) erases the memory in the terminal, including all applications and data files,
with the exception of those found in the Flash File Store or any removable storage.

1. Touch All Apps > Settings .

2. Select Backup & Reset, and then Factory Data Reset.
3. To erase all data on the SD card in addition to all data from internal storage, check the Erase SD card box.
4. To erase all data in the IPSM in addition to all data from the internal storage, check the Erase IPSM box.
5. Select Reset phone.

To perform a Factory Reset if the touchscreen is unresponsive and all other recovery methods have failed:

1. Press and hold the Power button for approximately 8 seconds until the terminal starts to reboot.

2. Press and hold the Recent and Volume Down buttons.

Connecting the Terminal to a Computer (PC) via a USB Connection

You can transfer files (e.g., pictures, music, and videos) between your computer and the terminal using the supplied USB
Charge/Communication cable or a Dolphin 70e Black HomeBase with a standard USB cable.
Note: The terminal supports Hi-Speed USB communication (USB 2.0) with a maximum data transfer rate of 480 Mbps.

1. Connect the terminal to your PC using the USB Charge/Communication cable supplied.

1 Micro USB Port

USB Door

Right Side Panel

of the Terminal
3
USB Port

2
USB Charge/Communication Cable

2. If a USB connection automatically establishes, a notification briefly appears at the top of the screen on the terminal:
Connected as a media device or Connected as a camera.

1 - 13
 If a USB connection does not automatically establish:

a. Touch All Apps > Settings > Storage.

b. Touch More , and then USB computer connection.

c. Select either Connected as a media device (MTP) or Camera (PTP). Your selection is stored as the default but is easy
to change by accessing the Notification panel. Swipe down from the Status/Notification bar at the top of the screen to
view USB connection details and change the type.
4. Depending on the Windows operating system either open File Explorer or Windows Explorer.
5. Under Computer, click on D75E.
6. You can now copy, delete and/or move files or folders between the computer and the terminal or the microSD card installed
in the terminal as you would with any other storage drive (e.g., cut and paste or drag and drop).
Note: When you connect as a Camera (PTP) only the DCIM and Pictures Folders from the Internal Storage show in File Explorer
or Windows Explorer.

The Dolphin 75e should only be connected via its microUSB connector to CTIA certified adapters, products that bear the USB-
IF logo or products that have completed, the USB-IF compliance program.

Using the File Browser Power Tool on the Terminal

File Browser provides a graphical utility to browse the files stored on the terminal and the microSD card.

1. Touch All Apps > Power Tools > File Browser .

2. Touch a folder name or file name to open the folder or file.
Note: Due to system permissions, some files cannot be opened. Depending on the associated application(s), a choice of
applications may be available to open the file.

Press the Menu button and select Home to return to the root folder or Close to exit the File Browser.

Enabling or Disabling File Auto Install

AutoInstall is enabled by default. When AutoInstall is enabled, during the power up boot or reboot process, the following folders
are searched for zip files containing applications.
• \Internal storage\honeywell\autoinstall on the terminal
• \IPSM card\ Honeywell\Autotinstall on the terminal
• \honeywell\autoinstall on a microSD card if installed in the terminal

Each zip file found is then compared to the applications already installed on the Dolphin terminal and:
• If the application is not installed, AutoInstall installs the application.
• If the application is already installed, AutoInstall checks to see if the zip file contains a newer version of the application,
and then installs the newer version.
• If the application is already installed and there is not a newer version, AutoInstall ignores the installation file.

When AutoInstall is not enabled, the contents of the Honeywell\Autoinstall folders on the terminal and on the SD card (if
installed) are ignored.

To disable AutoInstall:

1. Touch All Apps > AutoInstall Settings .

2. Remove the check from the Enable AutoInstall box to disable the option.

1 - 14
Installing Upgrades
Upgrades for the Power Tools and other system software on the Dolphin terminal come in the form of zip files and
are available from Customer Support or www.honeywellaidc.com.
To install a software upgrade:
1. Copy the upgrade file (*.zip) into one of the following folders:
• Internal storage\honeywell\autoinstall on the terminal
Software upgrades saved to this folder, do not persist when a Factory Reset (Clean Boot) is performed.
• IPSM card\honeywell\autoinstall on the terminal
Software upgrades saved to this folder, persist when a Factory Reset (Clean Boot) is performed.
• \honeywell\autoinstall on an SD card (if installed)
Software upgrades saved to this folder, do not persist when a Factory Reset (Clean Boot) is performed.

2. Touch All Apps > AutoInstall Settings . Verify Autoinstall is enabled.

3. Select Packages Update from the AutoInstall Settings screen. The terminal automatically initiates a reboot and
installs the software upgrade.

Depending on where you saved the file, you can also initiate a software upgrade using the terminal buttons instead of
the package update option.
If the file is located in the IPSM card\honeywell\autoinstall folder:
• Initiate a terminal Reboot. When the Honeywell logo appears and the green LED turns On, simultaneously press and
hold the Volume Up and Home buttons until the green LED turns Off.

If the file is located in the \honeywell\autoinstall on an SD card:

• Initiate a terminal Reboot. When Honeywell logo appears and the green LED turns On, simultaneously press and
hold the Volume Down and Home buttons until the green LED turns Off.

1 - 15
1 - 16
2
Hardware Overview

Standard Configuration for the Dolphin 75e

WLAN, WPAN, NFC & Camera
• Android 4.4
• Qualcomm APQ8074AB Processor
• 2GB RAM X 16GB Flash
• 3.7V Li-ion rechargeable standard or extended battery pack
• Dedicated imager capable of decoding standard 1D and 2D bar code symbologies
• 8.0 megapixel auto focus color camera
• 802.11a/b/g/n/ac and Bluetooth
• Near Field Communication (NFC) support

Peripherals for the Dolphin 75e

Each of the following items is sold separately to enhance the capabilities of your Dolphin terminal. Dolphin 70e Black
peripherals are compatible with Dolphin 75e terminals.

Dolphin 70e Black HomeBase (Model 70e-HB)

The HomeBase is a charging and communication cradle equipped with a USB host port that is Hi-Speed 2.0v compliant,
which enables the terminal to interface with the majority of PC-based enterprise systems. This device also contains an
auxiliary battery well that charges a spare Honeywell standard or extended battery pack.
For more information, see Dolphin 70e Black HomeBase (Model 70e-HB) on page 8-1.

Dolphin 70e Black eBase (Model 70e-EHB)

The Ethernet Base (eBase) enables a single Dolphin 75e terminal to communicate with a host device over an Ethernet
network. In addition, the ebase is equipped with a USB host port that is Hi-Speed 2.0v compliant, which enables the
terminal to interface with the majority of PC-based enterprise systems. This device also contains an auxiliary battery well
that charges a spare Honeywell standard or extended battery pack.
For more information, see Dolphin 70e Black eBase (Model 70e-EHB) on page 9-1.

Dolphin 70e Black Mobile Base (Model 70e-MB)

The Mobile Base is a charging cradle designed specifically for in-premise and in-transit data collection applications. It
features a flexible mounting bracket, an integrated speaker with volume control, and a cigarette lighter adapter to adapt it to
your mobile environment.
For more information, see Dolphin 70e Black Mobile Base (Model 70e-MB) on page 10-1.

Dolphin 70e Black ChargeBase (Model 70e-CB)

The ChargeBase is a 4-slot charging cradle that holds, powers, and charges terminals.
For more information, see Dolphin 70e Black ChargeBase (Model 70e-CB) on page 11-1.

Dolphin 70e Black Net Base (Model 70e-NB)

The Net Base enables up to four Dolphin 75e terminals to communicate with a host device over an Ethernet network. In
addition, the Net Base provides a second RJ45 Ethernet port for connection to an additional device such as a printer,
workstation, eBase, or another Net Base.
For more information, see Dolphin 70e Black Net Base (Model 70e-NB) on page 12-1.

QuadCharger (Model COMMON-QC)

The QuadCharger is a compact 4-slot battery charging station designed for use with Dolphin 75e 3.7V Li-ion rechargeable
batteries. For additional information on the common QuadCharger, visit the Dolphin 75e product page at
www.honeywellaidc.com or contact your local sales representative.

2-1
Accessories for the Dolphin 75e
Each of the following items is sold separately to enhance your terminal’s capabilities.
Note: When using accessories where the terminal is worn on the body, the terminal’s touch panel must face away from the
body.

Dolphin 70e Black Mobile Charger (Model 70e-MC)

The Mobile Charger is a charging cable that connects the terminal directly to a 12 Volt DC power source, such as a
cigarette lighter port inside a vehicle, eliminating the need for a cradle. Intelligent battery technology on-board the terminal
ensures proper charging. The Mobile Charger is an ideal low-cost charging solution for in-transit mobile applications.

USB Charge/Communication Cable Adapter Kit (Model 70e-USB ADAPTERKIT)

The Dolphin USB charge/communication cable adapter kit is an all-in-one solution for charging and communication. Use
the 70e-USB cable in conjunction with the included power supply adapter and plug adapter to charge the terminal from a
power outlet or connect the cable to a high-power USB port to charge from a host device. The 70e-USB cable also supports
communication with a computer without the need for a cradle. See Connecting the Terminal to a Computer (PC) via a USB
Connection on page 1-13.

Holsters (Model HOLSTER-2 and 6000-HOLSTER)

A holster provides convenient storage for the Dolphin 75e terminal in mobile environments. Long and short holster models
with integrated belt clips and spare battery pouches are available.

Wrist Lanyard (Model SL-LANYARD-1)

The black wrist lanyard attaches to the bottom corner of the terminal providing additional security from accidental drop
during terminal use.

Stylus (Model 75e-Stylus)

The stylus has a special tip for added accuracy and ease when operating the touch panel. The tether is a coiled, elastic
cord, which secures the stylus to the terminal to prevent accidental loss. The stylus may be ordered with or without the
tether.

Battery Door Kits

Replacement battery door kits are available for both standard and extended battery door types. See Important Battery and
Battery Door Replacement Guidelines on page 2-9 before ordering battery door kits for your terminal.

Battery (Models 70e-BTSC and 70e-BTEC)

The 3.7V Li-ion rechargeable battery provides the main power for the terminal. See Battery on page 2-9 for battery
specifications, replacement part numbers, and guidelines for use and disposal.

Protective Rubber Boot (Model 70e-BOOT)

Protective Black Rubber Enclosure provides added protection.

2-2
Features of the Dolphin 75e
Front, Bottom, and Right Panels
Battery Charging Status and General Notification LED
Front Speaker

Scan Status Notification LED

Right Scan/Image Button

Touch Panel Display

USB Door/Micro USB Port

Scan Button
Recent Apps Button

Menu Button Home Button

Fastener for an Optional Wrist Lanyard

or Stylus Tether

Back Button

Front Digital Microphone

Bottom Speaker

For a description of each callout, see page 2-4.

2-3
 Feature Descriptions: Front, Bottom, and Right Panels
Back Button
By default, the Back button returns you to the previous screen.

Bottom Speaker
The integrated bottom speaker sounds audio signals as you scan bar code labels and enter data. The integrated speaker
also supports playback of wave and MP3 files, software mixer, and speaker phone for VoIP audio.

Digital Microphone
The integrated digital microphone, located on the front of the terminal provide audio input for handset VoIP calls when a
headset is not plugged into the Audio Jack (see page 2-7). When a headset is plugged into the Audio Jack, the terminal
defaults to the microphone on the headset. By default, the front microphone is also used for speaker phone calls, voice
command audio input, and recording sound.

Front Speaker
The front speaker is the receiver for handset VoIP calls.

Fastener for an Optional Wrist Lanyard or Stylus Tether

The fastener provides access for attaching an optional wrist lanyard or stylus tether.

Battery Charging Status and General Notification LED

The light emitting diode (LED) located above and to the right of the display panel indicates the battery charge status. The
LED also illuminates briefly during power up and a reboot. For detailed information on settings and meanings, see
Understanding and Changing the Battery Charge Status LED Indicator on page 2-10.

Home Button
The Home button returns you to the Home screen, see page 1-6.

Menu Button
The Menu button to opens additional options and setting relevant to the open app.

Right Scan/Image Button

The right button triggers the scanner/imager when scan wedging is enabled (default) or when a scan/image demo app is
open (e.g., IQ Image Demo or Scan Demo). You can reassign the button to launch applications or execute commands; see
Remap a Button Function on page 1-10.

Recent Apps Button

The Recent Apps button allows you to view and switch between recently used apps.

Scan Button
The Scan button functions as a system wake-up control if the terminal has entered Sleep mode (Suspend mode). The
button also triggers the scanner/imager when scan wedging is enabled (default setting) or when a scan/image demo app is
open (e.g., IQ Image Demo or Scan Demo). You can reassign the button to launch applications or execute commands; see
Remap a Button Function on page 1-10.

2-4
Touch Panel Display
The color 4.3 inch WVGA (480 x 800 resolution) multi-touch capacitive touch panel is covered with an industrial protective
lens for greater durability. The touch panel can be activated with a finger or with the optional stylus.
Note: To conserve battery power the touch screen dims and then turns off after a period of no activity. Press the Power
button to wake the terminal from Sleep Mode (Suspend mode). See Changing the Display Settings on page 5-2 for
information on how to adjust sleep (timeout) settings.

USB Door/Micro USB Port

The micro USB port is located under the protective USB door on the right side of the terminal. To access the micro USB
port, gently lift the top edge of the door closest to the digital microphone.
The micro USB port in conjunction with the USB Charge/Communication Cable Adapter Kit powers the terminal, charges
the main battery, and facilitates communication. The micro USB port supports low, full, and high-speed USB v2.0 client
communication with a maximum rate of 480 Mbps.
For additional information, see Using the USB Charge/Communication Cable (Model 70e-USB ADAPTERKIT) on page 1-3.
and Connecting the Terminal to a Computer (PC) via a USB Connection on page 1-13.
The Dolphin 75e should only be connected via its microUSB connector to CTIA certified adapters, products that bear the
USB-IF logo or products that have completed, the USB-IF compliance program.

Scan Status Notification LED

The light emitting diode (LED) located above and to the left of the LCD display flashes and illuminates during
scan/ image capture to provide scan status information. For additional information, see Using the Scan Image Engine on
page 3-1.

2-5
 Back, Top, and Left Panels
For a description of each callout, see page 2-7.

Audio Jack
Image Engine Window (LED Aperture)

Power Button

Color Camera Lens

Camera Flash

Left Scan/Image Button

Volume Control Button

Battery Door Lock

Battery Door
(standard model shown)

Battery Latch
(battery and battery door not shown)
I/O Connector (see page 2-8)

NFC SIM Card Retention Flap

NFC SIM Card Socket

Memory Retention Flap

Memory Card Socket

2-6
Feature Descriptions: Back, Top, and Left Panels
Audio Jack
The audio jack is located under the protective door on the top of the terminal. To access the jack gently lift the edge of the
door marked with an arrow. The 3.5mm audio jack supports both speaker (stereo) and microphone (mono) headsets.

Battery
The 3.7V Li-ion rechargeable battery provides the main power for the terminal and is protected by the battery door. See
Battery on page 2-9 for battery specifications, replacement part numbers, and guidelines for use and disposal.

Battery Door
The battery door protects the battery and any installed SIM and/or memory cards in the terminal’s battery well. Proper
installation of the battery door preserves the environmental rating of the terminal. Do not use the terminal without the
battery door installed.

Battery Door Lock

The battery door lock secures the battery door to the terminal. Slide the lock down toward the IO contacts to release the
lock for battery door removal and battery access. Slide the lock up toward the camera lens to secure the battery door
closed and seal the battery in the terminal.

Battery Latch
The battery latch secures the battery in the battery well. Pull the latch away from the battery to release and remove the
battery from the terminal. For information on Replacing the Battery, see page 1-11.

Color Camera
The 8.0-Megapixel Resolution color camera provides easy picture and video capture. The camera lens and camera flash
are located on the back panel of the terminal.

Camera Flash
The camera flash is located on the back panel of the terminal. When used as a Camera Flash with the integrated color
camera, the flash is controlled by the camera application.

Image Engine Window

The image engine reads and decodes linear, stacked linear (e.g., PDF417), and 2D matrix bar code symbologies. The LED
aperture for the imaging engine’s LED aimer is contained behind this window. For more details, see Using the Scan Image
Engine on page 3-1.

Left Scan/Image Button

The left button triggers the scanner/imager when scan wedging is enabled (default) or when a scan/image demo app is
open (e.g., IQ Image Demo or Scan Demo). You can reassign the button to launch applications or execute commands;
see Remap a Button Function on page 1-10.

Memory Card Socket

The memory card socket gives you the option to expand the terminal’s memory capacity using microSD or microSDHC
memory interfaces. The expansion socket is located under the battery door and battery.
When the battery door and battery pack are properly installed, the card is sealed against moisture and particle intrusion,
read/write data is stored securely, and the terminal’s environmental rating is preserved; see Installing a Memory Card or
NFC SIM Card on page 2-12.

Memory Retention Flap

The retention flap locks the memory card in the socket; see Installing a Memory Card or NFC SIM Card on page 2-12.

2-7
 NFC SIM Card Socket
The NFC SIM card socket gives you the option to install a standard NFC Secure Element (SE) SIM card. The socket is
located under the battery door and battery.
When the battery door and battery pack are properly installed, the card is sealed against moisture and particle intrusion,
read/write data is stored securely, and the terminal’s environmental rating is preserved; see Installing a Memory Card or
NFC SIM Card on page 2-12.

NFC SIM Card Retention Flap

The retention flap locks the NFC SIM card in the socket; see Installing a Memory Card or NFC SIM Card on page 2-12.

Power Button

The Power button located on the top of the terminal initiates multiple functions depending on the length of time the
button is pressed.
• A quick press of the button toggles the terminal in or out of Sleep Mode (Suspend mode).
• Press and hold the button for approximately 4 seconds to access additional options including: Power, Reboot, Airplane
Mode, Volume.
• Press and hold the button down for approximately 8 seconds and the terminal automatically initiates a Reboot.

Volume Control Button

Press the top or bottom of the volume button to raise or lower the volume of the active speaker. Lower the volume all the
way down to turn off the volume and enable vibration mode.

The I/O Connector

The I/O connector powers the terminal, charges the main battery, and facilitates communication. Dolphin 70e Black peripherals
are designed to work exclusively with this connector. The I/O connector supports low, full, and high speed USB v2.0
communication with a maximum rate of 480 Mbps.

Pin Signal Description Terminal Back Panel

1 VDC_IN 5V DC input for charging and operation

2 VBUS_HOST 5V output for USB host and peripheral power

3 USB_DM_HOST USB D- for the host port

4 USB_DP_HOST USB D+ for the host port

5 USBC_DET Multipurpose pin to allow for detection of an

unpowered SLED, determine SLED type, and to
signal a HomeBase the docking of the terminal.

6 GND Ground connection

7 USB_DN_DOCK USB D- for the client port

8 USB_DP_DOCK USB D+ for the client port

Pin 9 Pin 1
9 VBUS_DOCK 5V input for USB client (and charging)

Note: Signals referenced are for a DTE device.

2-8
Battery
The primary power source for the Dolphin terminal is the 3.7V Li-ion rechargeable battery located under the battery door on the
back panel of the device. Honeywell recommends, you keep the battery in the terminal charged at all times to help prevent data
loss. Letting the battery become fully discharged causes the terminal to lose all data in RAM.
Note: All data in RAM is cleared when the battery is removed. Always power off the terminal before removing the battery to
ensure any changes made are saved to the flash memory.

Replacement Battery Specifications

Dolphin 75e model terminals are designed for use with battery part numbers BAT-STANDARD-02 (Li-ion 3.7V, 6.179 watt
hour) and BAT-EXTENDED-02 (Li-ion 3.7V, 12.358 watt hour) manufactured for Honeywell International Inc. For information
on how to replace the battery, see page 1-11.
Important Battery and Battery Door Replacement Guidelines
Follow the guidelines listed below when ordering batteries and/or battery doors.
• Size (e.g., standard or extended): The battery and battery door must be the same size.
• Type (e.g., locking or non-locking): Dolphin 75e models are only compatible locking type battery doors.
• Near Field Communication (NFC) requirements: Use only NFC compatible battery doors with NFC equipped Dolphin
models identified with the letter N at the end of the model number (e.g., 75exxN).
We recommend use of Honeywell Li-ion battery packs. Use of any non-Honeywell battery may result in damage
! not covered by the warranty.

Important: All battery and connector doors must be present, undamaged, and properly closed to maintain the
environmental rating of the terminal.

Invalid Battery Error Message

If the terminal displays an invalid battery error message, replace the battery with a qualified Honeywell Li-ion battery pack.

Charging Options
Dolphin 75e terminals ship with the battery significantly discharged of power. Before using a terminal for the first time,
charge the battery with a Dolphin charging device for a minimum of 4 hours for the standard battery and 6 hours for the
extended battery. When using the 70e-USB Charge/Communication cable to charge from a 500mA USB port on a host
device, charge the battery for a minimum of 6 hours for the standard battery and 8 hours for the extended battery.
When the main battery is installed in the terminal, use one of the following:
• Dolphin 70e Black HomeBase (Model 70e-HB), see page 8-1
• Dolphin 70e Black eBase (Model 70e-EHB), see page 9-1
• Dolphin 70e Black Mobile Base (Model 70e-MB), see page 10-1
• Dolphin 70e Black ChargeBase (Model 70e-CB), see page 11-1
• Dolphin 70e Black Net Base (Model 70e-NB), see page 12-1
• Dolphin 70e USB Charge/Communication Cable (Model 70e-USB ADAPTERKIT) included with terminal, see page 1-3
When the main battery is not installed in the terminal:
• Place the battery pack in the Auxiliary Battery Well of the Dolphin 70e Black HomeBase (Model 70e-HB) or the Dolphin
70e Black eBase (Model 70e-EHB).
• Insert the battery in the QuadCharger (Model COMMON-QC), see page 2-1.

Charging Times

Model: 70e-BTSC Model: 70e-BTEC

Charging Peripheral/Accessory
BAT-STANDARD-02 BAT-EXTENDED-02
HomeBase (Model 70e-HB) 4 hours 6 hours
eBase (Model 70e-EHB) 4 hours 6 hours

2-9
 ChargeBase (Model 70e-CB) 4 hours 6 hours
Net Base (Model 70e-NB) 4 hours 6 hours
Mobile Base (Model 70e-MB) 4 hours 6 hours
Mobile Charger (Model 70e-MC) 4 hours 6 hours
USB Charge/Communication Cable with provided power 4 hours 6 hours
supply (Model 70e-USB ADAPTERKIT)
USB Charge/Communication Cable (Model 70e-USB) 6 hours 8 hours
connected to a workstation (PC) 500mA USB port
QuadCharger (Model COMMON-QC) 4 hours 6 hours

Understanding and Changing the Battery Charge Status LED Indicator

You can select the type of feedback provided by the Battery Charge Status LED on the terminal. The factory default setting
is HSM Battery LED.

1. Touch All Apps > Settings > Battery LED.

2. Select one of the following options:

Default Battery LED

Terminal Connected Charger LED Illumination Battery Charge Level

No Blinking Red Battery level is below 15%
No Off Battery level is more than 15% (including 15%)
Yes Steady Red Battery level is below 15%
Yes Steady Amber Battery level is between 15% and 90%
Yes Steady Green Battery level is above 90% (including 90%)

HSM Battery LED (Factory Default Setting)

Terminal Connected to Charger LED Illumination Battery Charge Level

No Blinking Amber Battery level below 20%
No Off Battery level is more than 20%
Yes Steady Amber Battery level is between 0% and 60%
Yes Blinking Green Battery level is between 60% and 95%
Yes Steady Green Battery level is above 95%
Either Blinking Red Battery error

No Battery LED
When selected, the LED does not provide charge status feedback.

Important Charging Guidelines

Source Current Specifications
Battery charging times can be significantly lengthened or charging may not occur if the terminal is drawing more
currant than is supplied by the charging peripheral (e.g., HomeBase, eBase, Mobile Base, or ChargeBase), USB wall
charger, or USB Host (e.g., workstation PC).
• The maximum current supplied through a charging peripheral is 2.0A.
• The maximum current supplied by the USB wall charger is 900mA.

2 - 10
 • The maximum current supplied by a USB Host can vary from 100mA to 500mA. Do not attempt to charge the terminal
from a 100mA source. An active Dolphin terminal uses more current than supplied by a 100mA source causing the
terminal to continue to draw power from the battery.

Note: Placing the terminal in Sleep Mode (Suspend mode) while charging reduces the current draw of the terminal and
shortens the charging time of the battery.

To verify the battery is charging, touch All Apps > Settings > Battery.
Charging a Severely Low or Completely Discharged Battery
The terminal powers off if the battery charge goes below 1%. Connect the terminal to an AC power source for
charging. When you first connect the terminal to power for charging, the battery status LED on the terminal flashes red.
As the battery charge reaches approximately 2%, the battery status LED changes to a steady amber and a battery
charging icon briefly appears on the touch panel screen. Once the battery reaches a safe charge threshold, the
terminal boots when the Power button is pressed. The length of time before the battery reaches a safe charge
threshold varies depending on the extent of the battery discharge.
Note: If you are charging the terminal from a USB host device (PC) using the USB Charge/Communication Cable, the
length of time before the battery reaches a safe charge threshold varies depending on the extent of the initial
battery discharge level and the current supplied by the USB charging source. Inadequate source current may
interfere with effective battery charging.

Checking the Battery Health

To see the percentage of recharging life left on the battery touch All Apps > Settings > Battery.
Battery health is different than the amount of charge on left on the battery. For battery charge level information, select
Battery under Settings.

Managing Battery Power

Letting the battery become fully discharged causes the terminal to lose all data in RAM. Honeywell recommends, you keep
a charged battery in the terminal at all times to help prevent data loss. Removing the battery from the terminal erases all
non-persistent memory.
When the terminal is running on battery power (as opposed to external power), warnings are displayed when the battery
reaches critical and low battery points.
Checking Battery Power and Monitoring Battery Power Use

Touch All Apps > Settings > Battery to display information the battery status (charging or discharging), the
level (percentage) of charge remaining on the battery, and a breakdown of battery usage statistics for any running
apps and services.

Battery level and

Battery status.

Touch to view History

details.

Touch an item to view usage

details and adjust power use.

2 - 11
 Storing Batteries
To maintain top performance from batteries, avoid storing batteries outside of the following temperature ranges:
• 14°F to 113°F (-10°C to +45°C) for short term storage of less than one month
• 32°F to 86°F (-0°C to +30°C) for long term storage
Do not store batteries in extremely high humidity. For prolonged storage, do not keep batteries stored in a charger that is
connected to a power source.

Guidelines for Battery Pack Use and Disposal

The following are general guidelines for the safe use and disposal of batteries:
• Do not disassemble or open crush, bend or deform, puncture or shred.
• Do not modify or remanufacture, attempt to insert foreign objects into the battery, immerse or expose to water or other
liquids, expose to fire, explosion or other hazard.
• Improper battery use may result in a fire, explosion or other hazard.
• We recommend use of Honeywell Li-ion battery packs. Use of any non-Honeywell battery may pose a personal hazard
to the user.
• Only use the battery for the system for which it is specified. Do not use a battery in any other manner outside its intended
use in Dolphin terminals and peripherals.
• Only use the battery with a charging system that has been qualified with the system per standard IEEE-Std-1725-2006.
Use of an unqualified battery or charger may present a risk of fire, explosion, leakage, or other hazard.
• Replace the battery only with another battery that has been qualified with the system per this standard, IEEE-Std-1725-
2006. Use of an unqualified battery may present a risk of fire, explosion, leakage or other hazard.
• Replace defective batteries immediately; using a defective battery could damage the Dolphin terminal.
• Never throw a used battery in the trash. Promptly dispose of used batteries in accordance with local regulations.
• Do not short-circuit a battery or throw it into a fire; it can explode and cause severe personal injury. Do not allow metallic
conductive objects to contact battery terminals.
• If you observe that the Honeywell battery supplied is physically damaged, please send it to Honeywell International Inc.
or an authorized service center for inspection, see Customer Support.
• Battery usage by children should be supervised.
• Avoid dropping the terminal or battery. If the terminal or battery is dropped, especially on a hard surface, and the user
suspects damage, send it to a Honeywell International Inc. or an authorized service center for inspection.
• If you are not sure the battery or charger is working properly, send it to Honeywell International Inc. or an authorized
service center for inspection, see Customer Support.
• Excessive discharge can degrade battery performance. Recharge the battery when your terminal indicates low battery
power.
• Although your battery can be recharged many times, the battery life is limited. Replace it after the battery is unable to
hold an adequate charge.

System Resets
See Restarting the Terminal on page 1-12.

Hardware Maintenance
When needed, clean the image engine window and the touch screen with a clean, non-abrasive, lint-free cloth. The terminal can
be cleaned with a damp cloth.
Important: All battery and connector doors must be present, undamaged, and properly closed to maintain the environmental
rating of the terminal.

Installing a Memory Card or NFC SIM Card

You can expand the terminal’s memory capacity by installing a microSD or microSDHC card. Honeywell recommends the use of
Single Level Cell (SLC) industrial grade microSD or microSDHC memory cards with Dolphin terminals for maximum
performance and durability. Contact a Honeywell sales representative for additional information on qualified memory card
options.
Note: Format memory card before initial use.

2 - 12
Installation and/or Replacement
To install a memory card:
1. Power Off the terminal.
2. Unlock and remove the battery door.

Battery Door Lock

3. Pull the battery latch back and remove the battery.

Battery Latch

4. Lift the card retention flap for the appropriate socket, slide the card (contacts facing down) into the socket, and then
close the retention flap.

Memory Card
(contacts facing down)

NFC SIM Card Retention Flap

NFC SIM Card Chamfered Corner

Memory Card Retention Flap (contacts facing down)

5. Install battery and battery door. Apply pressure to the edges of the battery door to ensure the door is properly closed,
and then engage the door lock.

2 - 13
 6. Press the Power button .

2 - 14
3
Using the Scan Image Engine

Overview
The Dolphin 75e terminal houses a compact image engine that instantly reads popular 1D and 2D bar codes and supports
omni-directional aiming and decoding for greater flexibility in real-world settings. The image engine can also capture black and
white digital images, such as signatures and pictures of damaged inventory.
With the latest CMOS-based technology, the engine works like a digital camera and enables black and white digital image
capture, signature capture, and reading of OCR characters.

Image Engine Specifications

Field of View
Horizontal Field Angle (°) 21.9+/-0.5 degree
Vertical Field Angle (°) 15.9+/-0.5 degree

Depth of Field
The depth of field measurements used the following parameters:
• Distances are measured from the front of the engine.
• +23°C (+73°F), 0 lux
• Photographic quality codes

Distance (in/cm) Distance (in/cm)

Symbology Delta (in/cm)
Near Far
3 mil C39/128 - - -
5 mil C39/128 2.25 (5.7) 4.35 (11.049) 2.1 (5.3)
7.5 mil C39/128 1.25 (3.2) 6.87 (17.4) 5.62 (14.3)
10 mil C39/128 0.67 (1.7) 9.93 (25.2) 9.26 (23.5)
15 mil C39/128 1.01 (2.6) 15.16 (38.5) 14.15 (35.94)
20 mil C39/128 1.80 (4.57) 18.56 (47.14) 16.76 (42.57)
100% 13 mil UPC 1.57 (3.9) 12.18 (30.9) 10.61 (26.9)
5 mil PDF417 - - -
6.7 mil PDF417 1.53 (3.8) 4.63 (11.7) 3.1 (7.8)
10 mil PDF417 1.38 (3.5) 7.34 (18.6) 5.96 (15.1)
5 mil microPDF - - -
5 mil DataMatrix - - -
10 mil DataMatrix 1.52 (3.8) 4.87 (12.3) 3.35 (8.5)
20 mil DataMatrix 1.07 (2.7) 9.66 (24.5) 8.59 (21.8)
10 mil QR 1.50 (3.8) 5.13 (13.0) 3.63 (9.2)
20 mil QR 2.48 (6.3) 9.66 (24.5) 7.18 (18.2)
32 mil Maxicode 1.56 (3.9) 13.19 (33.5) 11.63 (29.5)

3-1
 Supported Bar Code Symbologies

Symbology Type Symbology Name

Codabar Interleaved 2 or 5
Code 3 of 9 ISBT 128
Code 11 Matrix 2 of 5
Code 32 Pharmaceutical (PARAF) MSI Plessey
Code 93 Straight 2 of 5 IATA
Code 128 Straight 2 of 5 Industrial
1D Symbologies
EAN with Add-On Telepen
EAN with Extended Coupon Code Trioptic Code
EAN-8 UPC with Add On
EAN-13 UPC-A
GS1-128 UPC-E
GS1 Databar
Aztec GS1 Databar
Codablock A MaxiCode
2D Symbologies Codablock F Micro PDF
Data Matrix PDF417
QR Code
UPC/EAN
Composite Codes UCC/EAN
GS1 Databar
MICR E 13-B
OCR OCR-A
OCR-B
Postnet and most international 4-state codes Canadian Post
Postal Codes Australian Post China Post
British Post

Decoding
The terminal supports image decoding for use in various bar code reading and imaging applications. Full-area imaging provides
omni-directional reading of linear and non-linear 1D and 2D bar codes, OCR, signature capture, and picture taking.
When reading all bar code types using full-area imaging, a positive read can be obtained from many positions; see Aiming
Beam on page 3-8. To achieve the best read, the aiming beam should be centered horizontally across the bar code.

Scan Wedging
The scan wedge feature sends scanned bar code data to an active application as Android keyboard input. By default, scan
wedging is enabled on Dolphin 75e terminals. Applications coded to use the scanner or applications that receive data
through the scan wedge feature can be used. If an application claims the scanner through the BarcodeReader API, the
scan wedge feature is temporarily disabled. Detailed information on how to create custom applications for your Dolphin
terminal is provided in the Software Development Kit (SDK), available for download at www.honeywellaidc.com.
Scan Data Processing and Settings
The scan wedge settings control the actions that occur between scanning a bar code and wedging the data to the
application. The following table identifies the settings associated with each step in the scan data process.

Process Step Associated Scan Setting

Decode bar code Symbology Settings
Interpret bar code as ISO8859-1

3-2
 Process Step Associated Scan Setting
Detect special bar codes and implement specific action Data Processing Settings Launch Browser
instead of normal processing. Scan To Intent
• URL bar code starts browser Launch EZ Config
• Scan-to-Intent starts an application
• EZConfig bar code starts EZConfig

Convert to selected character set Data Processing Settings Charset

Attach Prefixes and Suffix. The data string is composed in Data Processing Settings Prefix
the following order: Symbology Prefix
• Prefix Suffix
• Symbology Prefix
• Bar code data
• Suffix
Interpret substitutions of the Prefix and Suffix strings.
Activate a Total Freedom plugin. Data Processing Settings Data Editing Plugin
Inject the final data string as Android KeyEvents. Data Processing Settings Wedge

Prefix and Suffix Interpretation

Substitutions occur within the Prefix and Suffix string values.

Substring Replacement Character Code Wedged as a KeyEvent

\r 13 No
\n 10 Yes
\t 9 Yes
\\ '\' No

Changing the Scan Settings of the Default Profile

The scan wedge settings are organized by app profile. Changes made to the Default profile apply to all applications with no
profile.
To modify the scan wedge Default profile:

1. Touch All Apps > Settings > Scanning.

2. Touch Default.
3. Select either Data Processing Settings, Symbology Settings, Imager Settings, Trigger Settings or Notification Settings.
4. Modify the settings to meet your application needs.

To discard all changes made to the Default profile and restore the default values:

1. Touch more in the upper right corner of any scan settings screens,
2. Touch Restore all defaults.
Important: This option effects all settings within the profile not just the specific settings screen open at the time the option
is selected.

3-3
 Data Processing Settings

Setting Description Default Value

Wedge Enable or disable sending the bar code data as Android KeyEvents, when Enabled
sending data to the active application.
Charset Select the character set used when interpreting the bar code byte data ISO-8859-1
into a string.
• ISO-8859-1
• US-ASCII
• UTF-16
• UTF-16BE
• UTF-16LE
• UTF-8
Corresponds to BarcodeReader property:
PROPERTY_DATA_PROCESSOR_CHARSET
Prefix Define string added before the decoded bar code data. None
Suffix Define string added after the decoded bar code data. None
Data Editing Plugin Specify a Total Freedom data editing plug-in. No plug-in
specified
Symbology Prefix Specify a symbology identifier prefix to the bar code data. None
• None
• Honeywell
• AIM
Launch Browser Enable or disable URL bar code handling. If a bar code starts with http:// Enabled
or https://, the browser opens using the bar code data as a URL.
Corresponds to BarcodeReader property
PROPERTY_DATA_PROCESSOR_LAUNCH_BROWSER.
Scan to Intent Enable or disable special handling of scan-to-intent bar codes. Enabled
Applies to bar codes in one of the following formats:
'//' ACTION
'//' intent-suffix '$' extra-data
Where:
ACTION and extra-data are any string of characters.
Launches an application listening for the intent:
Intent action: "com.honeywell.scantointent.intent.action." + ACTION
Intent extra "com.honeywell.scantointent.intent.extra.DATA" contains the
remainder of the bar code data after the first '$' character.
Corresponds to BarcodeReader property
PROPERTY_DATA_PROCESSOR_SCAN_TO_INTENT
Launch EZ Config Enable or Disable special handling of EZConfig bar codes. Enabled
Applies to EZConfig bar codes, which are encoded with the Aztec
symbology and containing specific header data.
Corresponds to BarcodeReader property
PROPERTY_DATA_PROCESSOR_LAUNCH_EZ_CONFIG.

Symbology Settings
The Symbology Settings specify how bar codes are decoded during scanning. Symbologies with a check mark to the
right are enabled. To enable or disable a symbology, touch the check box. Select a symbology name from the list to
access configuration parameters specific to the symbology type. Swipe up or down to scroll up or down the list of
available symbologies.

3-4
Check the box to Touch the code type to access the
enable a symbology. advanced symbology settings.

Imager Settings
The Override Recommended Values setting is disabled by default. The recommended Imager Settings are designed to
work in a wide range of environments and should not normally need to be modified.
Trigger Settings

Setting Description Default Value

Decode Timeout Scanning will automatically turn off after this number of seconds if the 20
scan trigger is held and nothing has successfully decoded.

Notification Settings

Setting Description Default Value

Good Read Enable or disable a good read notification. Enabled
Notification The notification includes a short green blink of the scan LED, a short beep
tied to the system volume, and optionally a short vibration.
Bad Read Enable or disable notification of a failed scan. Disabled
Notification The notification includes a short red blink of the scan LED, an error beep
tied to system volume, and optionally a short vibration.
Vibrate Enabled Enable or disable vibrate along with Good Read or Bad Read Disabled
notifications.

3-5
 Adding a Scanning Profile
To create a scan setting profile for a custom app on the terminal:

1. Touch All Apps > Settings > Scanning.

2. Touch the plus sign (+) in the upper right corner of the App Profiles screen.
3. Select the custom app from the Target App list. The profile appears on the App Profiles screen list. You can now select
and modify the scan settings of the new profile.

Using the Scan Demo to Decode a Bar Code

The Scan Demo demonstrates the functionality of the integrated scan image engine in the terminal and is not intended as a
functional business solution. Detailed information on how to create custom applications for your Dolphin terminal is
provided in the Software Development Kit (SDK), available for download at www.honeywellaidc.com.

1. Touch All Apps > Demos > Scan Demo to open the Scan Demo application.
2. Point the Dolphin terminal at the bar code. For optimum performance, avoid
reflections by scanning the bar code at a slight angle.
3. Touch and hold Scan or press and hold the Scan button. Center the aiming beam
over the bar code; see Aiming Beam on page 3-8..
Note: By default, the left and right side buttons also trigger the scan/imager.

4. The bar code is decoded and the results appear on the screen.

Decode Results

Scan Statistics
See Configuring the Scan Demo
Application on page 3-7.

Touch the dots or swipe left or

right to scroll through the
decode results of past scans.

Automatic Scanning
Enable Automatic scanning mode to activate the imager for continuous scanning without requiring the operator to
touch Scan for each bar code presented in the field of view of the imager. To configure the time interval between scan
attempts, see Auto Scan Delay under Configuring the Scan Demo Application (page 3-7).

3-6
 1. Slide the Automatic blue button to the ON position to enable the feature.
2. Touch Scan or press the Scan button to activate the imaging engine. Once activated, the imager automatically
scans and decodes bar codes presented in the field of view.
3. Touch Scan or press the Scan button to deactivate the imager.
4. Slide the Automatic blue button to the OFF position to disable the feature.

Continuous Scanning
Enable Continuous scanning mode to activate the imager for continuous scanning only when the operator touches
and holds Scan or presses and holds the Scan button. The time interval between scan attempts is minimal and not
configurable.
1. Slide the Continuous blue button to the ON position to enable the feature.
2. Touch and hold Scan or press and hold the Scan button to activate the imaging engine.
The imager scans and decodes bar codes presented in the terminal’s field of view as long as Scan or the Scan but-
ton is pressed.
3. Release Scan or the Scan button to deactivate the imager.
4. Slide the Continuous blue button to the OFF position to disable the feature.

Configuring the Scan Demo Application

1. Open the Scan Demo application, and then press the Menu button .
2. Touch Scan Settings, Symbology Settings, or Notification Settings.

3. Modify the settings to meet your application needs, and then press the Back button to return to the Scan Demo
screen.

Scan Settings
Touch the check box to enable or disable a feature. A check mark indicates enabled.

Setting Description Default Value

View Statistics When enabled, scan results displayed include the length of bar code, the Enabled
number of scans completed, the number of milliseconds (ms) to decode
the bar code, the average decode time of all the bar codes decoded, the
shortest decode time of all bar codes decoded, and the longest decode
time of all bar codes decoded.
Auto Scan Delay Program the number of seconds between scan attempts by tapping the 1
menu arrow, and then entering the delay interval in second. The value
should be greater than 0 and less than 100000. Touch OK to save.
Auto Send When enabled, decoded data is sent to a designated server. Disabled
RF Configuration Touch to view and/or edit the Server IP address and the Port used for RF
communication. When the Back button is pressed, the terminal attempts
to establish communication.

Symbology Settings
For information on these settings, Symbology Settings on page 3-7.
Notification Settings
For information on these settings, Notification Settings on page 3-5.

3-7
 Using the Demo to Save a Picture for Troubleshooting
If a bar code is producing errors and you need to supply an image of the code to a support representative for
troubleshooting purposes, you can use the Scan Demo to capture a JPG of the bar code using the camera.

1. Open the Scan Demo application, and then press the Menu button .
2. Touch Capture Error Barcode.
3. Point the camera lens (located on the back of the terminal) at the bar code.
4. Touch the camera shutter to capture the image.
5. Touch the check mark to save the JPG image to the Internal storage\honeywell\scandemo folder.

Aiming Beam
The aiming beam is smaller when the terminal is held closer to the code and larger when it is farther from the code.
Symbologies with smaller bars or elements (mil size) should be read closer to the unit whereas symbologies with larger
bars or elements (mil size) should be read farther from the unit.
Linear Bar Code.

2D Matrix Symbol

Capturing Images
The image-capture process is an intuitive, split-second operation for experienced users. By following the basic guidelines, new
users can easily develop their own technique and, with practice, quickly learn to adapt it to different application environments.
Image Preview: When the imaging process is initiated, the touch screen displays a preview of the object. This is a live
video image of what the imager is currently viewing.
File Formats: File formats supported for image storage include JPEG (JPG) and Portable Network Graphics (PNG). The
default file format for images is a grayscale JPEG.
Compression: Digital images have a maximum image size of 832 x 640 pixels and may have up to a 256 grayscale image
definition. The image quality and related file size are determined by the data compression method used by the software
application used to take images. The average size of the image file is approximately 400–800K. However, the size of the
image depends on the content of the image - the more complex the content, the larger the file size.

3-8
Using the IQ Image Demo to decode intelligent bar codes and capture images
Decode an intelligent bar code, insert the data into predefined data fields, and capture an image of the bar code using the
IQ Image Demo. The demo includes four format options: Delivery, Postal, Embed, and No format. Each format is
designed to decode data from bar codes specifically coded to match the format of the option screen.
Note: The IQ Image Demo demonstrates the functionality of the integrated scan image engine in the terminal and is not
intended as a functional business solution. Detailed information on how to create custom applications for your Dolphin
terminal is provided in the Software Development Kit (SDK), available for download at www.honeywellaidc.com.

1. Touch All Apps > Demos . Swipe right to scroll to the IQ Image Demo, then touch .
2. Touch one of the four format options: Delivery, Postal, Embed, or No format.
3. Point the Dolphin terminal at the intelligent bar code.
4. Touch Scan or press the Scan button.
5. The decode results (e.g., Tracking Number and Address embedded in the bar
code) automatically populate the fields on the screen.
Note: You don’t need to clear the field to take another scan, just activate the image engine again.

6. Press the Menu button , and then tap File to save an image of the scan or bar code. The file is saved in the Internal
storage\honeywell\IQdemo folder on the microSD card.

Configuring the IQ Image Demo Application

1. Open the IQ Image Demo application, and then touch one of the four configuration options (i.e., Delivery, Postal,
Embed or No format).

2. Press the Menu button .

3. Touch Setting to access and modify Image Type (i.e., Binary or Grayscale) or Sound to toggle audible
feedback on or off for successful scans.

3-9
 Using the Signature Demo
The Signature Demo captures a signature on the touch screen.

1. Touch All Apps > Demos . Swipe right to scroll to the Signature Demo, then touch .
2. Using a finger or the optional stylus, sign the touch screen.

Touch screen signature area.

Date Stamp

Touch to clear signature Touch to adjust the pen width of

screen without saving. the signature displayed on the
screen.

Touch to save image Touch to toggle Date

of signature. Stamp on or off.

3. Touch .
4. Enter a name for the of the image file you want to save, and then select the file type: JPEG or PNG.
5. Touch Save. The signature image file is saved in the Internal storage\honeywell\signaturedemo folder.

Uploading Images
Image files can be uploaded to a host workstation using a USB connection, see page 1-13.

3 - 10
4
Using the Color Camera

Overview
Dolphin 75e terminals are equipped with 8.0-Megapixel auto focus cameras to provide easy integration of color picture and
video capture into business applications. The camera lens and camera flash are located on the back panel of the terminal.

Camera Lens

Camera Flash

Pictures and videos captured using the Camera app are stored on the micorSD card in the DCIM folder under Camera (Internal
storage\DCIM\Camera). You can copy your pictures and videos to a computer (see page 1-13) or view, edit, and share your
pictures and videos using the Gallery app.

Opening the Camera app and Adjusting the Settings

To open the Camera app, touch Camera on the Home screen.

Adjusting the Camera/Video Settings

The camera/video settings are adjustable from within the Camera app.
Zoom
The camera zoom is controlled using a pinching motion on the touch screen. Place two fingers on the screen at the
same time, and then either spread them apart to zoom in (enlarge and object) or pinch them together to zoom out.
More Settings

Touch to access the additional settings options .

Select each settings icon to access different option menus (e.g., Picture Size, Sharpness, Storage Position, Store
Location).
Select HDR to turn High Dynamic Range Mode on or off. When HDR is enabled, the terminal automatically captures
multiple photos and combines them into one photo creating best quality image possible.

Taking a Photo

1. Open the Camera app (see page 4-1).

2. Verify single photo mode is selected.

3. Center the object you want to take a photo of on the live preview screen.

4-1
4. Touch to capture the photo.
5. Swipe left on the touch screen to view the captured photo. From the film strip screen you can:
• View the captured photo.
• Access options to share the photo.
• Touch More to access editing options, delete, view details, or set a photo as a contact photo or the Home screen
wallpaper.
• Swipe left or right to scroll through your other photos or videos.

6. Press the Back button to return to the Camera app.

Taking a Panoramic Photo

1. Open the Camera app (see page 4-1).

2. Touch to view other mode options. Select panorama mode .

3. Point the camera lens at the beginning of the scene you want capture.

4. Touch the blue shutter to start capturing the photo.

5. Slowly sweep the camera lens across the scene using the screen preview as a guide. A progression bar appears at the
bottom of the screen and the message, “Capturing Panorama” appears at the top. Once the photo has been captured,
“Rendering Panorama” briefly appears on the screen.
6. Swipe left on the touch screen to view the captured photo. From the film strip screen you can:
• View the captured photo.
• Access options to share the photo.
• Touch More to access editing options, delete, view details, or set a photo as a contact photo or the Home screen
wallpaper.
• Swipe left or right to scroll through your other photos or videos.

7. Press the Back button to return to the Camera app.

Recording Video

1. Open the Camera app (see page 4-1).

2. Touch to view other mode options. Select video mode .

3. Point the camera lens at the scene or object you want to capture in video.

4. To start capturing video, touch .

5. To stop capturing video, touch .

6. Swipe left on the touch screen to view the captured video. From the film strip screen you can and access options to share
the picture or touch More to view editing options, delete the image, view photo details, or set the photo as the your
wallpaper or a contact photo.

7. Press the Back button return to the Camera app.

4-2
Uploading Pictures and Videos
Picture and Video files can be uploaded to a computer using a USB connection. For additional information, see page 1-13.

4-3
4-4
5
Settings

Overview
The Settings allows you to verify and/or alter system parameters to customized your terminal to meet your specific needs. Touch

All Apps > Settings or pull down the notification panel, touch > Settings .

Wireless & Network Settings

For information on Wi-Fi and VPN settings, see Wireless & Networks Settings, beginning on page 6-1.
For information on Bluetooth settings, see Working with Bluetooth and NFC Technology, beginning on page 7-1.
For information on Ethernet settings, see Establishing Ethernet Communication on page 9-6.

Device Settings
Changing the Sound Settings

1. Touch Sound from the Settings screen.

2. Select the configuration setting you want to modify.

Volumes
Adjust the volume sliders to set the volume level used for music, videos, games, other media, ring tones, notifications,
and alarms.
Default notification sound
Select the default system notification sound.

5-1
 Touch sounds
Enable or disable sound feedback during touch screen interaction.
Screen lock sound
Enable or disable sound when screen is unlocked.
Vibrate on touch
Enable or disable vibration feedback during touch screen interaction.

Changing the Display Settings

1. Touch Display from the Settings screen.

2. Touch the configuration setting you want to modify.

Brightness
Adjust the slider to a fixed display brightness level or select Auto if you want the terminal to automatically adjust the
brightness of the screen.
Wallpaper
Select the Home screen background by selecting a photo from the Gallery or one of the Live Wallpapers or
Wallpapers available.
Auto-rotate screen
The display automatically adjusts the orientation of the screen between landscape and portrait when the terminal is
rotated. Touch the Auto-rotate screen check box to toggle the option on or off.
Sleep
The touch screen dims and then turns off after a specified period of inactivity to save battery power. Touch Sleep and
select how many minutes or seconds you want to elapse before the screen automatically turns off and the terminal
enters Sleep mode (Suspend mode). For information on Sleep mode (see page 1-10).
Daydream
You can set up a screen saver for when the terminal is charging or docked.

1. To turn the Daydream feature On or Off touch the toggle box .

2. Select the type of screen saver you want activated and then adjust the settings for the option by touching
3. Touch When to Daydream and select either While docked, While charging, or Either.
4. Touch Start Now to preview the screen saver.

Font size
Select the screen font size.

Viewing Storage Statistics

Touch Storage from the Settings screen to view use and space statistics for the internal storage on the terminal and
memory card if installed.
SD card Utilities
From the Storage settings screen, you can select Unmount SD card for safe memory card removal and use Erase SD
card to erase all data on the installed memory card or Encrypt SD card to encrypt the data on the card.

Changing the Battery Settings

See Managing Battery Power on page 2-11.

5-2
 Managing Apps

Touch Apps from the Settings screen to view, evaluate, and modify how applications installed on the terminal or SD
card utilize memory and storage resources.
Touch the tabs at the top of the Apps screen to view lists organized into four categories:
• Select Downloaded to display all apps downloaded to the terminal.
• Select Running to display application processes and services running on the terminal and cached background
processes. Touch Show cached processes or Show running services at the top of the screen to switch between
the lists.
• Select All to display all apps stored on the internal storage of the terminal.

To sort a list, press the Menu button , and then touch Sort by size or Sort by name.

Displayed at the bottom of each category screen is the memory or storage type, the amount of storage or memory used by
the listed applications, and the amount of free space remaining.
•
Note: You can also reach the Apps screen from the Home screen by pressing the Menu button, and then selecting Manage
apps.

Accessing App Info

To access the App info screen, touch the app name. The App info screen contains detailed statistics on the selected
app including the amount of storage or cache utilized, default launch settings, and access permissions granted to the
app. Statistics useful when troubleshooting slow terminal performance, low memory issues, or an unresponsive
application. The Apps info screen also provides access to perform the following actions:
• force stop the app
• uninstall or disable the app
• clear stored data
• clear cache
• clear any launch by default settings assigned to the app

Uninstalling or Disabling an App

1. Press the Menu button from the Home screen, and then touch Manage apps.
2. Touch the application you want to uninstall.
3. Touch Uninstall or Disable, and then OK to confirm.

Stopping an App Process or Service

1. Press the Menu button from the Home screen, and then touch Manage apps.
2. Touch the Running tab.
3. Touch the cached background process or running service you want to stop.
4. Touch Stop.

Personal Settings
Enabling or Disabling Location Service

Touch Location from the Settings screen to enable or disable location services or view recent location requests by
apps. Location services are used when apps access Wi-Fi or mobile networks to approximate the location of the terminal to
improve search results and other services.

5-3
 To enable or disable location services:

1. Touch All Apps > Settings .

2. Touch the Location OFF/ON toggle box to turn the location services or .

Managing Security

Touch Security from the Settings screen to manage terminal security parameters (e.g., authorization for device
administration, setup a screen lock, setup a SIM card PIN, enable/disable visible passwords, load security certificates, and
setup a password to protect the terminal's credential storage).
Setting up a Screen Lock
The Screen Lock settings provide access to additional security features that enable you to prevent an unauthorized
person from unlocking the touch screen and accessing the terminal.
To set up a screen lock:

1. Touch Security from the Settings screen.

2. Touch Screen lock.
3. Select from five security options: None, Slide, Pattern, PIN or Password.
4. Enter a pattern, PIN or password, and then Next or Continue.
5. Enter the same pattern, PIN or password, and then select Confirm or OK.
To change or remove the screen lock:

1. Touch Security from the Settings screen.

2. Touch Screen lock.
3. Enter your pattern, PIN or password.
4. Select None or select a new screen lock option.
Once you have established a screen lock, additional settings appear under the Screen Security heading depending
on the type of security you implemented.
• Enable widgets
• Make pattern visible
• Automatically lock
This setting specifies the time increment for the screen to automatically lock after entering Sleep mode.
• Power button instant lock

Displaying Owner Info on the Lock Screen

Select the Owner Info setting to designate custom text you want displayed on the lock screen. You can also disable
owner information from displaying.
Encrypting the Data on the Terminal
You can encrypt all the data on your Dolphin terminal using the Encrypt phone option as an advanced security
measure in case your device is ever lost or stolen. When the terminal is encrypted, you must enter a numeric PIN or
password each time you turn the power on. The Screen Lock PIN or password you set up is the same PIN or
password used for encryption security and cannot be set independently.
Warning: You cannot reverse encryption. The only way to revert back to an unencrypted state is to perform a factory
reset, which erases all your data.
Making Passwords Visible
Touch the Make passwords visible check box to toggle between hiding or showing passwords as you type.

5-4
 Viewing or Deactivating Device Administrators
The Device administrators screen lists all applications that have been given authorization to act as a device
administrator, which is often required when you set up accounts that synchronize data between the terminal and an
enterprise service. An enterprise service implements security policies on the terminal before allowing a connection
(e.g. passwords and certificates).
Touch Device administrators from the Security screen, and then touch the application name if you want to remove
authorization for the app to act as a device administrator for the terminal.
Viewing or Changing App Permissions
Apps ops allows you to view or change permissions for a specific apps and services.
To view and modify the permissions for an app:

1. Touch Security from the Settings screen.

2. Touch Apps ops.
3. Swipe left to view four app lists Locations, Personal, Messaging, Media, Device, Bootup.
4. Select an app or service from one of the lists.

5. Touch the toggle boxs to turn permissions or .

Allowing Unknown Sources

Check the Unknown sources box to allow the installation of non-market applications. This setting is disabled by
default.
Managing Trusted Credentials
For information on managing and installing security certificates, see Working with Certificates on page 6-5.

Language & input

Touch Language & input from the Settings screen to access options to modify the default language for the display,
change the automatic spelling correction settings, manage your personal dictionary, configure keyboard & input methods for text
entry, manage speech settings for voice searches and text-to-speech output and set the mouse/trackpad pointer speed.

Changing the Display Language

Touch All Apps > Settings > Language & input > Language, and then select the language you want displayed
on the touch screen.

Activating Spell Check

Touch All Apps > Settings > Language & input > Spelling correction to turn the feature on or off.

Touch to change the language settings when the feature is turned on.

Managing the Personal Dictionary

Touch All Apps > Settings > Language & input > Personal Dictionary to add, edit, or delete words from your
personal dictionary.

Changing the Keyboard & Input Methods

The virtual keyboard appears when you open an application or select a field that requires text or numerical input. The
content of the keyboard may vary depending on the selected default, the application in use, and the input field
requirements.

5-5
 To modify the default keyboard type used for entering text:

1. Touch All Apps > Settings > Language & input > Default.
2. Select a keyboard. The default is Android Keyboard (AOSP).

If you do not see any other keyboard options besides Android Keyboard (AOSP) on the list, touch Set up input
methods. Select the keyboard you want included on the list and then press the back button .

Important: To use the full functionality of the Enhanced Keyboard a license must be purchased and loaded on the
terminal. If no license is detected, a trial software notification message appears when you select the Enhanded
Keyboard option. Once a license is purchased the Honeywell Enhanced Keyboard is fully customizable using
the Honeywell Virtual Keypad Creator software.

Touch next to the keyboard name to adjust settings specific for the keyboard type (e.g., Keyboard Skin, Vibrate on Key
Press, Sound on Key Press, Show Key Preview, Show Settings Key, and Input Language Preference).

Customizing the Optional Enhanced Keyboard

Customization of the Enhanced Keyboard requires a software license purchase, downloading and installing the Honeywell
Virtual Keypad Creator software on your computer (PC) and an active connection between the terminal and your computer.
If no license is detected, a trial software notification message appears when you select the Enhanced Keyboard option or
you attempt to upload a customized keyboard to your terminal using the Honeywell Virtual Keypad Creator software.
The user-friendly utility allows you to personalize multiple keyboard features including key position, size, quantity, color, and
the keyboard skin. In addition, you can make language changes, create alternate or function keys for special character sets,
and add application launch keys to streamline common business tasks.
There are two software components required for customizing the Enhanced Keyboard.
• The first is the Honeywell Virtual Keypad Creator, which resides on your PC and is used to design, save, and
download custom keyboard layouts to your Dolphin terminal.
• The second is the enhanced Honeywell virtual keyboard file HoneywellVK.xml, which is located in the \D75E\Internal
storage\HoneywellVK folder on your Dolphin terminal. This keyboard file is what displays on the terminal screen when
the enhanced Honeywell virtual keyboard is selected as the default virtual keyboard; see Language & input on page
6-7.
The customization process is easy.
1. Download and install the Honeywell Virtual Keypad Creator software onto your PC.
2. Connect your Dolphin terminal your PC using the USB charge/communication cable provided.
3. Enable Developer options on the terminal. For information on how to enable developer options, see page 5-9.

4. Touch All Apps > Settings > Developer options. Check USB debugging.

5. Touch All Apps > Settings > Security. Check Unknown sources.
6. Open the Virtual Keypad Creator software on your PC.
7. Select Android from the Device menu, and then Yes to confirm changing the device platform.
8. Open and modify the standard layout or create a new layout.

Select Help > Contents or click the Help icon for detailed information on how to open, modify and create new keypad
layouts.
9. Select File > Save As.
Note: The Save button overwrites the default keypad template provided with the software with any changes you have
made to the layout. Make a backup copy of the template or use the Save As option if you want to keep the
provided default template for later use.

10. Select Device > Update Configuration. Follow the prompts to install the custom enhanced keyboard on your terminal.

5-6
 Configuring Text-to-Speech
To configure Text-to-speech (TTS) settings:

1. Touch All Apps > Settings > Language & input > Text-to-speech output.
2. Select a preferred engine used for speech synthesis when you want to hear text read aloud.

3. Touch next to the engine to change the engine settings (e.g., language).
4. Touch Speech rate and select the speed at which text is spoken.
To listen to an example of speech synthesis based on the current settings select Listen to an example.

Adjusting the Sensitivity and Speed of the Touch Panel Response

1. Touch All Apps > Settings > Language & input > Pointer Speed.
2. Use the slider adjustment to change the sensitivity and speed of the touch screen response to your finger swipe.

Backup & reset

For information on performing a Factory Reset (Clean Boot), see Resetting the Terminal on page 1-13.

Honeywell Settings
Key Remapping
For information on how to change the button functions, see Remap a Button Function on page 1-10.

Modifying the Smart Sensors

Touch Smart Sensors from the Settings screen to configure the integrated motion detection sensors for advanced
power management.
Keep awake on motion
When enabled, the terminal is prevented from entering Sleep mode (Suspend mode) when motion is detected. By
default, this option is disabled.
Wake on motion
When enabled, the terminal wakes from Sleep mode (Suspend mode) when motion is detected. By default, this option
is disabled.
Face down suspend
When enabled, the terminal enters Sleep mode (Suspend mode) when placed face down on a flat surface. By default,
this option is disabled.

Changing the Battery LED Functionality

See Understanding and Changing the Battery Charge Status LED Indicator on page 2-10.

Viewing the Battery Health

See Checking the Battery Health on page 2-11.

Activating the Logger

You can activate a logging service that creates an Android logcat log and kernel log for APP and system trouble shooting.
Select the ON/OFF toggle box to turn the logger or .

5-7
 Scanning
For information on modifying scan application profiles, see Scan Wedging on page 3-2.

Web applications
These settings are meant to be used in conjunction with a future Web Application SDK offering.

Accounts
Adding or Modifying an IMAP or Corporate Exchange Account

Touch IMAP from the Settings screen to view accounts and add, remove, and manage exchange accounts
(e.g., e-mail) and allow apps to automatically schedule and sync data.
To add an account:

1. Touch All Apps > Settings .

2. Touch Add account.
3. Select either Corporate or IMAP.
4. Follow the on-screen instructions to enter the required information for the account type selected. You may need to
provide a user name and password, select security settings, and configure data sync preferences during the setup.
5. The account appears on the Settings > IMAP accounts list when setup is complete. Depending on the settings you
selected during the account configuration, your terminal may automatically start to sync account data (e.g., email,
contacts, music and calendar).
To modify account settings:

1. Touch All Apps > Settings > IMAP.

2. Touch Account settings.
3. Select either General Settings or a specific account.
To remove an account:

1. Touch All Apps > Settings > IMAP.

2. Touch the account to delete.

3. Press the Menu button , and then select Remove account.

4. Touch Remove account to confirm deletion.

System
Setting the Date & Time

Touch Date & time from the Settings screen to access options to configure the date, time, time zone, time format, and
date format displayed on the terminal. You can set the terminal to synchronize the date and time using a network
connection by checking the Automatic date & time box or you can manually enter the values by touching Set date, Set
Time, or Select Time zone.
To modify how the time is displayed on the screen, check the Use 24-hour format box to switch from a 12-hour cycle to a
24-hour cycle. In a 24-hour time cycle, 1:00 pm displays as 13:00 pm.
To change the date format displayed on the screen, touch Select date format, and then select a format from the list.

5-8
Customizing Services and System Features for Accessibility

Touch Accessibility from the Settings screen to configure services and features that make using the terminal easier
to use. If a service or tool is installed on the terminal, touch the name to enable or disable the service or modify the
associated settings.
You can also access and configure the following system features from the Accessibility screen:
• Captions
• Magnification gestures
• Large text
• Speak passwords
• Accessibility shortcut
• Text-to-speech output
• Touch & hold delay

For detailed information on these features, go to the Android Accessibility Help Center at www.support.google.com/
accessibility/android/#topic=6007234.

Enabling Developer Options

To access advanced settings used by Android application developers:

1. Touch About phone on the Setting screen.

2. Tap the Build number seven times.

3. Press the Back button to return to the Settings screen.

4. Touch Developer options.

5. Touch the ON/OFF toggle box to enable the Developer options Settings screen to access
advanced settings used by Android application developers. For information on these settings, Android APIs, and
development tools, refer to the Android developer web site at http://developer.android.com.

About Phone
The About Phone screen displays specific information about the terminal including: Model number, Android OS version,
Processor info, Kernel version, and Build number.
Touch Status to view:
• Battery status
• Battery level (% of charge)
• IP address
• Wi-Fi MAC address
• Bluetooth address
• Serial number
• Up time
Touch Legal information to view important information on Open source licenses for the software.

For more detailed information about the terminal:

Touch All Apps > Settings > Power Tools > Diagnostic Information .

5-9
5 - 10
6
Communication

Wireless & Networks Settings

Under the Wireless & Networks heading on the Settings screen there are options for turning the onboard wireless radios in
the terminal on or off and for configuring network connections.

Connecting the Terminal to a Wireless Network

You connect the terminal to a wireless network through the on-board radios (802.11a/b/g/n/ac and/or Bluetooth). Each radio has
its own configuration utility and requires specific information about the wireless network to connect. A successful connection
depends on your network infrastructure so you may need to consult your network administrator before attempting a connection.

WLAN (802.11a/b/g/n/ac)
The Dolphin 75e has a 802.11a/b/g/n/ac WLAN (Wireless Local Area Network) radio. The radio is interoperable with other
802.11a/b/g/n/ac, Wi-Fi compliant products including access points (APs), workstations via PC card adapters, and other
wireless portable devices.

Bluetooth
See Working with Bluetooth and NFC Technology on page 7-1.

6-1
Wi-Fi Network Connections
Turning Wi-Fi Networking On or Off

1. Touch All Apps > Settings .

2. Touch the Wi-Fi OFF/ON toggle box to turn the radio or .

Connecting to a Wi-Fi Network

1. Touch All Apps > Settings > Wi-Fi.

2. Verify the Wi-Fi is turned .

The terminal searches for available Wi-Fi access points within range of the device. If the terminal previously connected
to a Wi-Fi network, it automatically reconnects to the same network.
3. Touch the network name you want to connect to from the available network list.
4. If the network is secured, a dialog box appears requesting information relevant to the network security protocol (e.g.,
password, key, or certificate). Enter the required information.
5. Touch Connect.
Note: To remove a Wi-Fi network the terminal previously connected to, touch the network name, and then touch Forget, to
delete the stored network information.

Receiving Network Notifications

If Wi-Fi networking is turned On, you can set the terminal to notify you when an open network is available.

1. Touch All Apps > Settings > Wi-Fi.

2. Press the Menu button , and then touch Advanced.

3. Touch the check box to toggle Network notification On (checked) or Off.

Adding a Wi-Fi Network

1. Touch All Apps > Settings > Wi-Fi.

2. Verify the Wi-Fi is turned .

3. Touch the plus sign (+) located at the bottom of the available Wi-Fi network list.
4. Enter the Network SSID (Wi-Fi network name).
5. For secure Wi-Fi network connections, touch None under Security, and then select the type of security protocol
required from the pop-up menu (e.g., WEP, WPA/WPA2 PSK or 802.1xEAP). To access Proxy and IP settings, select
to box next to “Show advanced options”.
6. Enter any additional security information required by the type of security protocol selected.
7. Touch Save.

6-2
Advanced Wi-Fi Settings and Network Utilities
Advanced Wi-Fi Menu
The Advanced Wi-Fi menu provides access to the terminal MAC address, IP address, and the following settings:
• Network notification
Enables or disables available Wi-Fi network notification.
• Keep Wi-Fi on during sleep
Specifies how the Wi-Fi radio reacts when the terminal enters Sleep mode.
• Scanning always available
Enable or disable if apps are allowed to scan for networks even when the Wi-Fi is Off (e.g., Google Location Services).
• Passive to Active
Enable or disable if the channel is marked as valid for active scanning if beacons or probe responses are received.
• Wi-Fi frequency band
Epecifies the Wi-Fi frequency band to be used (i.e., Auto, 5 GHz only, or 2.4 GHz only)
• Install Certificates
For information how to install certificates, see Working with Certificates on page 6-5.
• CCX Enable
This setting is part of a future offering and not available at this time.
• Wi-Fi optimization
Enable or disable minimization of battery usage when Wi-Fi is On.

To access the advanced Wi-Fi menu:

1. Touch All Apps > Settings .

2. Under Wireless & Networks, touch Wi-Fi.

3. Press the Menu button or touch More

4. Select Advanced.

Wi-Fi Radio Settings Power Tool

The Wi-Fi Radio Settings network utility provides several options for advanced configuration of the Wi-Fi 802.11 radio in the
terminal. The settings are organized under two tabs: Basic and Advanced.

Modifying Station Mode and AP Mode Configurations

1. Touch All Apps > Power Tools > Wi-Fi Radio Settings .
2. Select the Basic to access Station Mode and AP Mode configuration settings.
Select the Advanced to access RTS Threshold or Fragmentation Threshold configuration settings.
3. Modify the settings to meet your requirements.

4. Touch More in the upper right corner of the screen.

5. Select Apply Wi-Fi settings.

Viewing General Wi-Fi Info

The Wi-Fi Info power tool enables you to view the status of the Wi-Fi radio, information on current and available access points
and detailed roaming statistics.

1. Touch All Apps > Power Tools > Wi-Fi Info .

2. Select AP Info or Roam Tracker to view detailed statistics or touch the ON/OFF toggle box next to Wi-Fi to
change the power status.

6-3
Airplane Mode
See Turning Airplane Mode On/Off on page 1-11.

Virtual Private Networks (VPN)

To complete the VPN setup screens, you may need to ask your ISP or network administrator for the proxy server name, server
type, port, type of Socks protocol used, and your user name and password if you do not already have the information.

Adding a VPN Profile

1. Touch All Apps > Settings .

2. Under Wireless & Networks, touch More > VPN.
Note: VPN connections require you to set a screen lock PIN or password before you can use credential storage. If you have
not set either security option, select OK on the pop-up notification window, and then set a screen lock PIN or
password. Once you complete the process, you are automatically directed back to the VPN screen.

3. Touch the plus sign (+) at the top of the screen to Add VPN network.
4. Enter the VPN Name, and Type you want to add. To continue to the next input field, select Next on the virtual keypad or
swipe up. Complete the remaining data fields with the appropriate information for your network. The terminal supports
the following protocol types:
• PPTP
• L2TP/IPSec PSK
• L2TP/IPSec RSA
• IPSec Xauth PSK
• IPSec Xauth RSA
• IPSec Hybrid RSA

5. Touch Save.
Note: To delete a VPN, touch and hold the network name on the VPN screen, and then touch Delete network.

To edit a VPN configuration, touch and hold the network name on the VPN screen, and then touch Edit network.
Touch Save to retain your changes.

Connecting to a VPN

1. Touch All Apps > Settings .

2. Under Wireless & Networks, touch More > VPN.
3. Touch the name of the VPN.
4. Enter any security credentials (e.g., password, user name, certificate information or server name) required by the VPN.
5. Touch Connect.

Note: When a VPN connection is established, a shows in the status bar.

Disconnecting from a VPN

1. Drag the status bar down from the top of the touch screen to view the Notification panel.
2. Touch the VPN connection notification to disconnect.

Editing or Deleting a VPN Profile

1. Touch All Apps > Settings .

2. Under Wireless & Networks, touch More > VPN.

6-4
 3. Touch and hold the name of the VPN.
4. Select either Edit profile or Delete profile.
5. Edit the profile information and select Save.

Working with Certificates

The Settings menu provides access to options that help you manage your Wi-Fi network and/or Virtual Private Network
(VPN) security certificates.
Android supports DER-encoded X.509 certificates saved with a .crt or .cer file extension or X.509 certificates saved in
PKCS#12 key store files with a .p12 or .pfx file extension. To install a valid certificate or key store file with a different extension,
you must change the certificate or key store file extension to a supported type (e.g., .crt, .cer, .p12 or .pfx).

Installing a Certificate
To install an encrypted certificate or key file:
1. Copy the certificate from the host device (PC) to either Internal storage on the terminal or the root directory of an
installed SD (optional).

2. Touch All Apps > Settings > Security > Install from SD card.
3. From the Open from screen, select a storage location (e.g. Internal storage or SD card), and then navigate to where you
saved the file.
4. Touch the file name of the certificate or key store to install and enter a password if required.
5. Touch OK.
6. Enter the name of the certificate, and then touch OK.
Note: Once an encrypted certificate is installed on the terminal, it is automatically deleted from the SD card.

Viewing More Storage Locations or Changing the Screen View

From the Open from storage source screen, select More > Settings.
• Select Advanced devices to enable full storage access (both Internal storage and external SD card, if installed).

• Select Display file size to show file size statistics.

After selection a storage source:

• Select More to change the view (e.g., Grid view or List view) or to access Settings.

• Select to sort By name or By date modified.

• Select to search for a file.

Viewing, Disabling, or Removing Certificates

Touch Trusted credentials from the Security menu to view all the security credentials installed on the terminal. Tabs
organize the certificates into two categories: System and User. Touch the certificate name to view additional details about
the certificate.
To disable a system certificate or remove a user certificate:

1. Touch All Apps > Settings > Security > Trusted credentials.
2. Touch the certificate name from the System or User list.

6-5
 3. Scroll to the bottom of the Security certificate details screen.
4. Touch Disable or Remove depending on the type of certificate you are viewing.
5. Select OK.
Note: System certificates can be enabled using the same method at a later date but User certificates are permanently
deleted if removed.

Ethernet Communication
See Establishing Ethernet Communication on page 9-6.

6-6
7
Working with Bluetooth and NFC Technology

Bluetooth Technology
Turning the Bluetooth Radio On or Off
Bluetooth™ is a short-range wireless communications technology used to exchanged data between devices over a
distance of approximately 26.2 feet (8 meters). Before you can connect or pair your terminal to another device using
Bluetooth technology, you must first turn on the Bluetooth radio.

1. Touch All Apps > Settings .

2. Touch the Bluetooth OFF/ON toggle box to turn the radio on .

Once the Bluetooth radio is activated, the terminal automatically starts searching for discoverable devices.
Note: System bar icons at the top of the touchscreen indicate the status of the Bluetooth radio.

Pairing and Trusted Devices

The terminal supports pairing with other devices using Bluetooth technology. Pairing happens during general connection
setup. Paired devices are “trusted” devices. This means that there is unrestricted access to all services (including services
that require authorization and authentication).

Connecting to Other Bluetooth Devices

To connect to other Bluetooth devices, you need to perform a device search, select a discovered device, and then connect
to the selected device. Pairing happens as part of the connection process.
1. Make sure the Bluetooth device you are attempting to connect to is in range and set to be discoverable by other devices
using Bluetooth technology.

2. Touch All Apps > Settings . Verify the Bluetooth radio is activated .
3. Touch Bluetooth.
4. Touch Search for Devices to refresh the scan started when the Bluetooth radio was first activated.
5. Touch on the name of the device you want to connect to on Available Devices list.
6. The Bluetooth radio attempts to connect with the device. If the device has a specific passcode, enter it when prompted.
Note: When attempting to connect to a printer or headset with Bluetooth capabilities, the passcode may default to either
1234 or 0000. If there is no default, consult the device literature for the number.

7. When the devices are paired successfully, the device name is displayed under the “Paired Devices” heading on the
Bluetooth settings screen.

Configuring or Unpairing Bluetooth Devices

1. Touch All Apps > Settings . Verify the Bluetooth radio is activated .
2. Touch Bluetooth.

3. On the Paired Devices list touch the settings icon next to name of the device you want to disconnect.
4. Touch Rename, Unpair or select a different profile from the Profiles list available for the paired device.

Making the Terminal Discoverable

By default, the Dolphin terminal is not discoverable, which means that the terminal will not be found by other Bluetooth
devices.

7-1
 To make the terminal discoverable:

1. Touch All Apps > Settings .

2. Verify the Bluetooth radio is activated .

3. Touch Bluetooth.
4. Touch Dolphin 75e (default terminal name) at the top of the screen to make the device discoverable. The terminal starts
a 2 minute count down during which time the terminal is temporarily discoverable by other devices using Bluetooth
technology.

Bluetooth Menu Options

You can access additional configuration options from the Bluetooth screen by pressing the Menu

button .
• Rename phone changes the default Dolphin 75e terminal name to a custom name of your choice. Enter the new name,
and then select Rename.
• Visibility timeout changes the default 2 minute visibility timeout increment. Select 5 minutes, 1 hour or Never time out.
• Show received files lists statistics on received files.

Sharing Pictures and Video

Before attempting to transfer files, make sure the receiving Bluetooth device is in range of the terminal and set to be
discoverable by other devices. Depending on the operating system of the receiving device, you may also need to set the
device to receive incoming beams.
1. Verify the Bluetooth radio is enabled. See Turning the Bluetooth Radio On or Off on page 7-1.

2. Touch All Apps > Gallery .

3. Touch the album that contains the picture or video you want to share.

4. Select a picture or video from the thumbnail gallery, and then touch the share icon in the upper right corner of the
screen.
5. Press the Menu button then Select item to touch multiple pictures or videos you want to share.
6. Touch Bluetooth.
7. The Bluetooth device picker screen opens. Do one of the following:
Touch Scan for devices, and then touch the name of the receiving device from the available device list.

OR
Touch on the name of an already paired device from the Bluetooth device list.

8. A pop-up message notifies you the file is Sending and the upload notification icon appears on the status bar.
9. Accept the file transfer on the receiving device. The acceptance procedure depends on the device’s OS and security
protocols.

10. If the device is another Android device, a Bluetooth incoming file notification icon appears on the status bar. Drag
down the Notification panel, and then touch on the Bluetooth Incoming file notification.
11. Touch Accept to allow the file transfer.
12. A pop-up message notifies you the device is downloading the file and the file location. The download notification icon
appears on the status bar.
13. Drag down the Notification panel on either device, to verify if the file transfer was complete.

7-2
Near Field Communication (NFC) Technology
NFC technology provides the ability for short-range, wireless data transfer between the terminal and NFC tags or other NFC
enabled devices placed in close proximity to the back of the terminal. NFC equipped Dolphin 75e models support the following
modes of operation:
• NFC tag reader/writer mode
The terminal reads and/or writes digital information from or to an NFC tag.
• Peer-to-Peer (P2P) mode
The terminal uses Android Beam and/or Bluetooth technology to transfer screen content (e.g., a picture, contact
information, Web page url, or file) between NFC enabled devices.
• NFC card emulation mode
The terminal emulates an NFC card (smart card) that an external card reader can access. You have the option to enable
the embedded secure element (eSE) SmartMX™ or Host Emulation. Secure element implementation is commonly used
for financial transactions or coupon and loyalty mobile marketing applications that require a secure memory and
execution environment for the storage of personal information (e.g., account information and credentials) and/or running
custom smart card applets.
Note: Sleep mode (Suspend mode) and the screen lock temporarily turns the NFC radio off.

Hardware Requirements
NFC functionality is hardware dependent and only available on Dolphin 75e models ending with the letter N (e.g., 70exxN).
Use only NFC compatible replacement battery doors with NFC equipped Dolphin models.

Security Recommendation
NFC functionality is enabled by default on Dolphin 75e models ending with the letter N (e.g., 75exxN). The recommended
setting for NFC functionality is disabled until the feature is required. Enabling NFC allows data exchanges between the
terminal and other NFC devices or tags.

NFC Settings
Enabling or Disabling NFC Functionality

1. Touch All Apps > Settings .

2. Under Wireless & Networks, touch More.
3. Touch the box next to NFC to either enable (check) or disable (not checked) short-range wireless data exchange.

Enabling the Android Beam

Android Beam functionality is only available if NFC is enabled.

1. Touch All Apps > Settings .

2. Under Wireless & Networks, touch More.
3. Verify the box next to NFC is checked (enabled).
4. Check the box next to Android Beam.

Selecting the Card Emulation Mode

1. Touch All Apps > Settings .

2. Under Wireless & Networks, touch More.
3. Verify the box next to NFC is checked (enabled).
4. Touch Card emulation route mode.
5. Select either Host Card Emulation or Embedded Secure Element.
Note: Select Embedded Secure Element for reading MIFARE® Classic tags.

7-3
 Reading NFC Tags
1. Verify NFC is enabled (see page 7-3).
2. If reading MIFARE Classic tags, verify Embedded Secure Element is selected as the Card emulation route mode (see
page 7-3).
3. Hold the NFC tag close to the back of the terminal. When an NFC tag is recognized, the terminal emits a sound and the
tag data displays on the terminal screen.
Note: The terminal must be unlocked for NFC tag detection. If sound is muted, the terminal vibrates when an NFC tag is
detected.

See page 7-4 for information on Using the NFC Demos.

Transferring screen content via NFC

1. Verify NFC is enabled (see page 7-3).
2. Verify Android beam is enabled on the sending terminal.
3. Open the item you want to share (e.g., contact, picture, or Web page).
4. Hold the terminals back to back. The sending terminal emits a sound, the screen image shrinks, and the message,
“Touch to beam” displays.
5. Both terminals must be unlocked for NFC tag detection. If sound is muted, the terminal vibrates when an NFC tag is
detected.
6. Touch the reduced screen image to initiate the transfer. The receiving terminal displays the transferred content.
Note: If an active network connection is present, Android Market™ opens if the item received requires an app not installed
on the device.

Using the NFC Demos

Honeywell NFC Demos demonstrate the basic NFC capabilities of the terminal and are not intended as a functional
business solution. Detailed information on how to create custom applications for your Dolphin terminal is provided in the
Software Development Kit (SDK), available for download at www.honeywellaidc.com.
Note: Honeywell NFC Demo are designed for use with NFC equipped Dolphin 75e models only. Before using the demos,
you must enable NFC functionality on the terminal (see page 7-3).

NFC Tag Demo

The NFC Tag Demo demonstrates basic NFC tag reading and writing using the terminal. Three options are available
under the demo: Read a tag, Write a contact, and Write a message. Read a tag demonstrates how the terminal
reads and displays data from NFC tags placed in close proximity to the back of the terminal. Write a contact and
Write a message demonstrates how you can write (save) data to a writable or rewritable NFC tag. The data is then
displayed whenever the NFC tag is read.

Touch All Apps > Demos . Swipe right to scroll to NFC Demos, and then touch to open the demo.

To Read a tag:

1. Touch NFC Tag Demo from inside the NFC Demos app.

2. Touch Read a tag .

3. Hold the NFC tag close to the back of the terminal. An “NFC Tag Detected” notification displays on the screen with
the raw data contained in the tag. The terminal must be unlocked for NFC tag detection.

7-4
To Write a contact on an NFC tag:

1. Touch NFC Tag Demo from inside the NFC Demos app.

2. Touch Write a contact .

3. Select a contact from your saved contacts list.
4. Hold the writable or rewritable NFC tag close to the back of the terminal. A “Write successful” popup message dis-
plays on the screen.
To Write a message on an NFC tag:

1. Touch NFC Tag Demo from inside the NFC Demos app.

2. Touch Write a message .

3. Input the message, and then select Write.
4. Hold the writable or rewritable NFC tag close to the back of the terminal. A “Write successful” popup message dis-
plays on the screen.

NFC Bluetooth
NFC Bluetooth demo demonstrates how NFC in conjunction with Bluetooth technology can facilitate the transfer of a
file between two devices.
Note: The NFC Bluetooth Demo is for use with Dolphin 75e terminals only.

1. Verify NFC technology is enabled on both terminals.

2. Verify Android beam is enabled on the terminal sending the file.

3. Touch NFC Bluetooth from inside the NFC Demos app on the sending terminal. The NFC Bluetooth
demo automatically enables Bluetooth technology on both terminals during the demo process.
4. Touch Select.

5. Choose to browse either the Gallery or Drive for the file. A Google account is required for Google
Drive™ online storage service. Additional fees may apply.
6. Touch the file name or picture thumbnail to send. Once a file is selected, the NFC Bluetooth app screen displays an
brief pop-up message to “Ensure devices are near for beaming.” You do not need to touch “Select” again if the pic-
ture or file appears on the screen.
7. Hold the terminals back to back. The sending terminal emits a sound, the screen image shrinks, and the message,
“Touch to beam” displays. Both terminals must be unlocked to for NFC detection. If sound is muted, the terminal
vibrates when an NFC tag is detected.
8. Touch the reduced screen image. The terminal automatically initiates a Bluetooth pairing. Once pairing is complete,
the file is sent.

The file image and saved location are displayed on the receiving terminal screen when the transfer is successful.
By default, the file is saved to the root Honeywell/nfcbtdemo folder of the microSD card.

9. Select the Back button to exit the demo. The NFC Bluetooth demo automatically disables Bluetooth technol-
ogy when the demo is closed.

NFC Beam Demo

NFC Beam Demo demonstrates how a file can be transmitted between two devices using the Android beam.
Note: The NFC Bluetooth Demo is for use with Dolphin 75e terminals only.

7-5
 1. Verify NFC technology is enabled on both terminals.
2. Verify Android beam is enabled on the terminal sending the file.

3. Touch NFC Beam Demo from inside the NFC Demos app on the sending terminal.
4. Check the box next to the test.txt file.
5. Hold the terminals back to back. The sending terminal emits a sound, the demo screen image shrinks, and the mes-
sage, “Touch to beam” displays.
Note: Both terminals must be unlocked for NFC detection. If sound is muted, the terminal vibrates when an NFC tag is
detected.

6. Touch the reduced screen image to initiate file transfer.

A “File received” message is displayed on the receiving terminal when the transfer is successful. By default, the file
is saved to the root Honeywell/nfcbeamdemo folder of the microSD card.

7. Select the Back button to exit the demo.

7-6
8
Dolphin 70e Black HomeBase (Model 70e-HB)

Overview
The Dolphin 70e Black HomeBase (Model 70e-HB) is a charging and communication cradle that supports USB Hi-Speed 2.0v
communication, which enables the terminal to interface with the majority of PC-based enterprise systems. The HomeBase also
contains an auxiliary battery well that charges a spare Honeywell standard or extended battery.
The 70e-HB charger is designed for use with the following Dolphin models and batteries manufactured for Honeywell
International Inc:

Dolphin Models Battery Model No. Battery Part No. Battery Specification

Dolphin 75e 70e-BTSC BAT-STANDARD-02 Li-ion 3.7V, 6.179 watt hour

Dolphin 70e
70e-BTEC BAT-EXTENDED-02 Li-ion 3.7V, 12.358 watt hour

We recommend use of Honeywell peripherals, power cables, and power adapters. Use of any non-Honeywell
! peripherals, cables, or power adapters may cause damage not covered by the warranty.

Unpacking the HomeBase

Open the shipping box and inspect the package to see that the following standard items are included:
• One Dolphin HomeBase, model 70e-HB
• One power supply (see Power on page 8-4)
• One power cord
These items are needed to operate the HomeBase. If any items are missing or anything appears to be damaged, contact your
Customer Account Representative. Keep the original packaging in case you need to return the HomeBase for service or to store
the HomeBase while not in use.

Optional Equipment
A standard USB (Type A to B) cable is required when using the HomeBase for communication between the terminal and a
host device.

Charging Overview
The base provides power to the intelligent battery charging system in all Dolphin terminals that senses when a full charge has
been achieved and switches to a trickle charge to maintain the full charge. The base completes a full charge of the main battery
installed in the terminal seated in the terminal well in 4 hours for the standard battery or 6 hours for the extended battery. The
base completes a full charge of the battery pack in the Auxiliary Battery Well (see page 8-3) in 4 hours for the standard battery
or 6 hours for the extended battery.
Note: Before attempting to use, charge, or replace the battery in the terminal, you should read the Guidelines for Battery Pack
Use and Disposal on page 2-12.

We recommend use of Honeywell Li-ion battery packs. Use of any non-Honeywell battery may result in damage
! not covered by the warranty.

Convenient Storage
The intelligent battery charging system makes this base a safe and convenient storage receptacle for your Dolphin terminal.

8-1
Capacity
The base holds one terminal and features an auxiliary battery well behind the terminal well that can charge a battery pack
independently of the terminal well. This means that one base can charge two battery packs: the one installed in the terminal and
a spare.

We recommend use of Honeywell peripherals, power cables, and power adapters. Use of any non-Honeywell
! peripherals, cables, or power adapters may cause damage not covered by the warranty.

Dimensions

65.6 mm
[2.58 inches]

129.3 mm 116.3 mm
[5.09 inches] [4.58 inches]

Weight
HomeBase weight: 303g [.668 lbs]
Note: Weight excludes packaging, cables and power supply.

8-2
Parts and Functions
Front Panel
Auxiliary Battery Well
Terminal Well

COMM LED

Dock LED
AUX Battery LED

Terminal Well
Place the terminal in this well to communicate with a host device, power the terminal, and charge the installed battery pack.
The base completely charges the main battery in a Dolphin terminal in 4 hours for the standard battery or 6 hours for the
extended battery. See page 8-6 for information on USB Communication between the host and terminal via the HomeBase.

Auxiliary Battery Well

See "Auxiliary Battery Well" on page 8-4

AUX Battery LED

Indicates status of the battery charging in the auxiliary battery well; see Back Panel on page 8-4.

This color means…

Orange The auxiliary battery is charging.
Green The auxiliary battery has completed charging and is ready for use.

For information about charging a battery in the auxiliary battery well, see page 8-5.

Dock LED
Indicates if a terminal is docked properly in the base.

This color means…

Blue The terminal is properly seated in the base.

COMM LED
This is the communication LED. It indicates the status of data transfer between the Dolphin terminal and the host device.

This color means…

Green A USB Connection is established with the host workstation.

8-3
Back Panel
Auxiliary Battery Well

USB Port

DC Power Jack

Auxiliary Battery Well

The base enables you to charge an additional battery pack independently of the terminal well in 4 hours for the standard
battery or 6 hours for the extended battery. This feature ensures that you can always have a fully-charged battery for your
terminal. See Charging a Spare Battery in the Auxiliary Battery Well on page 8-5.

USB Port
This USB port is USB v2.0 Hi-Speed (480 Mbps) compliant. Using a USB cable, you can connect the base to a host device,
such as a workstation. When the terminal is seated in the terminal well, it is connected to the host device via the base. See
Communication on page 8-6.

DC Power Jack
See Power on page 8-4.

Bottom Panel
For details on how to mount the HomeBase, see Mounting the HomeBase on page 8-6.

Serial Number Label

Compliance Label

Power
The base requires 12 Volts DC input for communications, battery charging, and power output to the terminal. The power adapter
included with the base, converts the voltage from the AC power source to 12 Volts DC. Use only a UL listed power supply,
which has been qualified by Honeywell with output rated at 12VDC and 3 amps with the device. The operating
temperature range is -10° to 50°C (14° to 122°F). Honeywell recommends that you leave the base connected to its power
source at all times, so that it is always ready to use.
We recommend use of Honeywell peripherals, power cables, and power adapters. Use of any non-Honeywell
! peripherals, cables, or power adapters may cause damage not covered by the warranty.

8-4
Connecting Power to the HomeBase
Power Adapter
1. Plug the A/C power cord into the power adapter.
2. Plug the power cable into the power connector on the back
of the HomeBase. A/C Power Cord

3. Plug the A/C power cord into a grounded power source.

4. The base is now powered.

Power Cable

Charging the Main Battery

The base provides power to the Dolphin terminal and allows the charging of the terminal’s battery. The intelligent battery
charging system incorporated into all Dolphin terminals prevents overcharging, which means that Dolphin terminals may be
stored in the base indefinitely without damage to the terminals, battery, or the base. When the terminal is docked, the base
completes a full charge in 4 hours for the standard battery or 6 hours for the extended battery.
For more information about Honeywell battery packs and how to check battery power levels in your terminal, refer to Battery
(page 2-9).

To Power a Terminal and Charge its Main Battery

Ensure all components are dry prior to mating terminals/batteries with peripheral
! devices. Mating wet components may cause damage not covered by the warranty.

1. Install the battery pack in the terminal; see Install the Battery on page 1-1.
2. Slide the terminal into the terminal well. The Dock LED illuminates blue. Battery charging
begins immediately if required by the Dolphin terminal.

Note: When the terminal is docked, the Battery Icon changes from to indicating the
terminal is running on external power. Battery charging occurs in the background. When
the Dolphin is removed from the base, the battery icon indicates the charge level of the 2

battery, see Common Status and Notification Icons on page 1-7.

We recommend use of Honeywell Li-Ion battery packs. Use of any non-Honeywell battery may result in damage
! not covered by the warranty.

Charging a Spare Battery in the Auxiliary Battery Well

The auxiliary battery well located on the back of the base charges a spare battery independently of the terminal well. The Aux
Battery LED on the front panel indicates the status of the battery in this well. Charge time is 4 hours for the standard battery
pack or 6 hours for the extended battery pack; see Auxiliary Battery Well on page 8-4.
1. Insert the battery at an angle.
Note: Align the battery contacts with the contacts inside the auxiliary battery
well.

2. Snap the battery into place with a hinging motion. The Aux Battery LED lights
orange during charging.
3. Use the AUX Battery LED to monitor the charging progress. The LED changes to
green when the auxiliary battery has completed charging and is ready for use.

8-5
Communication
Dolphin terminals support USB communications out of the box. The base also supports USB communications via the USB port
located on the back. The base acts as a USB device by interfacing the USB signals of the Dolphin terminal to the USB of the
host workstation. Using a standard USB cable, the base’s USB interface allows the Dolphin terminal to communicate with a
workstation.
Note: This base cannot be daisy-chained.

Requirements
• A base powered by a power cable and power adapter cable
• A standard USB (Type A to B) communication cable
• A work station running Windows XP, Windows Vista, or Windows 7.

Establishing USB Communication

1. Connect power to the HomeBase (see Power on page 8-4).
2. Plug the USB communication cable into the USB port on the back of the base.
Note: The Dolphin terminal should always be removed from the HomeBase when connecting or disconnecting the USB
cable.

3. Connect the other end of the USB cable to the host workstation.
4. Insert the Dolphin terminal into the terminal well of the base. The Dock LED illuminates blue.
5. If a USB connection automatically establishes, a notification briefly appears at the top of the screen on the terminal:
Connected as a media device or Connected as a camera.

If a USB connection does not automatically establish:

a. Touch All Apps > Settings > Storage.

b. Touch More , and then USB computer connection.

c. Select either Connected as a media device (MTP) or Camera (PTP). Your selection is stored as the default but is
easy to change by accessing the Notification panel. Swipe down from the Status/Notification bar at the top of the
screen to view USB connection details and change the type.
4. You can now copy, delete and/or move files or folders between the computer and the terminal or the microSD card
installed in the terminal as you would with any other storage drive (e.g., cut and paste or drag and drop).
Note: When you connect as a Camera (PTP) only the DCIM and Pictures Folders from the Internal Storage show in File
Explorer or Windows Explorer.

Mounting the HomeBase

Set the base on a dry, stable surface, such as a desktop or workbench near an electrical outlet. The user should be able to view
and operate the Dolphin terminal while it is in the base. When choosing a mounting location, bear in mind that the location must
allow users' easy access to the Auxiliary Battery Well and the back panel of the HomeBase where the USB port and the power
jack are located.

Optional DIN Rail Mount

A DIN rail (7.5 X 35 mm) may be installed on the bottom of the base to provide the optional security of mounting the base to
a flat horizontal surface with hardware.

Additional Hardware
• DIN Rail, Qty. 1
• 3/16 in. dia x 5/8 in. long pan head screw, Qty. 2
• 1/2 in. OD x 7/32 in. ID x 3/64 in. thick washer, Qty. 4

8-6
• 3/16 in. dia nut, Qty. 2
Note: The items listed are for reference only. Final hardware selection is dependent on the material type and thickness of
the mounting surface.

Installing the DIN Rail

1. Slide the DIN rail into the slot along the bottom panel of the base.

DIN Rail Slot

2. Use the appropriate hardware to secure the DIN rail to the desk or flat surface.

8-7
8-8
9
Dolphin 70e Black eBase (Model 70e-EHB)

Overview
The Ethernet Base (eBase) enables a single Dolphin 75e computer to communicate with a host device over an Ethernet
network. The 70e-EHB charger is designed for use with the following Dolphin models and batteries, manufactured for Honeywell
International Inc:

Dolphin Models Battery Model No. Battery Part No. Battery Specification

Dolphin 75e 70e-BTSC BAT-STANDARD-02 Li-ion 3.7V, 6.179 watt hour

Dolphin 70e
70e-BTEC BAT-EXTENDED-02 Li-ion 3.7V, 12.358 watt hour

We recommend use of Honeywell peripherals, power cables, and power adapters. Use of any non-Honeywell
! peripherals, cables, or power adapters may cause damage not covered by the warranty.

Unpacking the eBase

Open the shipping box and inspect the package to see that the following standard items are included:
• One Dolphin eBase Ethernet cradle, model 70e-EHB
• One power supply (see Power on page 9-4)
• One power cord
These items are needed to set up and operate the eBase. If any items are missing or anything appears to be damaged, contact
your Customer Account Representative. Keep the original packaging in case you need to return the eBase for service or to store
the eBase while not in use.

Optional Equipment
• A standard USB (Type A to B) cable is required when using the eBase for USB communication between the terminal and
a host device.
• A standard CAT-5 Ethernet network cable is required when using the eBase for communication between the terminal and
a host device over an Ethernet network.

Charging Overview
The base provides power to the intelligent battery charging system in all Dolphin terminals that senses when a full charge has
been achieved and switches to a trickle charge to maintain the full charge. The base completes a full charge of the main battery
pack installed in the terminal seated in the terminal well in 4 hours for the standard battery or 6 hours for the extended battery.
The base completes a full charge of the battery pack in the Auxiliary Battery Well (see page 9-3) in 4 hours for the standard
battery or 6 hours for the extended battery.
Note: Before attempting to use, charge, or replace the battery in the terminal, you should read the Guidelines for Battery Pack
Use and Disposal on page 2-12.

We recommend use of Honeywell Li-ion battery packs. Use of any non-Honeywell battery may result in damage
! not covered by the warranty.

Convenient Storage
The intelligent battery charging system makes this base a safe and convenient storage receptacle for your Dolphin terminal.

Capacity
The base holds one terminal and features an auxiliary battery well behind the terminal well that can charge a battery pack
independently of the terminal well. This means that one base can charge two battery packs: the one installed in the terminal and
a spare.

9-1
Dimensions

65.6 mm
[2.58 inches]

129.3 mm 116.3 mm
[5.09 inches] [4.58 inches]

Weight
eBase weight: 310g [.683 lbs]
Note: Weight excludes packaging, cables and power supply.

Parts and Functions

Front Panel
Auxiliary Battery Well Terminal Well

COMM LED

AUX Battery LED Dock LED

Terminal Well
Place the terminal in this well to communicate with a host device, power the terminal, and charge the installed battery pack.
The eBase completely charges the main battery in a Dolphin terminal in 4 hours for the standard battery or 6 hours for the
extended battery.

9-2
 Auxiliary Battery Well
See "Auxiliary Battery Well" on page 9-3

AUX Battery LED

Indicates status of the battery charging in the auxiliary battery well; see Back Panel on page 9-3.

This color means…

Orange The auxiliary battery is charging.
Green The auxiliary battery has completed charging and is ready for use.

For information about charging a battery in the auxiliary battery well, see page 9-5.

Dock LED
Indicates if a terminal is docked properly in the base.

This color means…

Blue The terminal is properly seated in the base.

COMM LED
Indicates the status of the connection and data transfer between the Dolphin terminal and the host device.

This color means…

Green A USB Connection is established with the host workstation.

Note: Ethernet activity is indicated by RJ45 integrated LED on the back panel of the base.

Back Panel
Auxiliary Battery Well
Green LED

Yellow LED

RJ45 Ethernet Port

DC Power Jack
USB Port

Auxiliary Battery Well

The eBase enables you to charge an additional battery pack independently of the terminal well in 4 hours for the standard
battery or 6 hours for the extended battery. This feature ensures that you can always have a fully charged battery for your
terminal.

9-3
 USB Port
This USB port is USB v2.0 Hi-Speed (480 Mbps) compliant. Using a USB cable, you can connect the base to a host device,
such as a workstation (PC). When the terminal is seated in the terminal well, it is connected to the host device via the base.

RJ45 Ethernet Port

Use a standard CAT-5 Ethernet cable; you can connect the ebase to an Ethernet-compliant device to facilitate Ethernet
communication to and from the terminal. The RJ45 connector includes integrated LEDs that provide Ethernet
communication status and speed information.

Status Yellow LED Green LED

No Ethernet Link Off Off
10Mbps Ethernet Connection Established Off On
100Mbps Ethernet Connection Established On On
Data transfer in progress Connection Speed Dependent Flashing
(see above)

DC Power Jack
This connector receives input from the power adapter. Plug the power connector cable from the power adapter into this
connector, see Power.

Bottom Panel
For details on how to mount the eBase, see Mounting the eBase on page 9-7.

Serial Number Label

MAC Address Label

Compliance Label

Power
The base requires 12 Volts DC input for communications, battery charging, and power output to the terminal; the power adapter
included with the base converts the voltage from the AC power source to
12 Volts DC. Use only a UL listed power supply, which has been qualified by Honeywell with output rated at 12VDC and
3 amps with the device. The operating temperature range is -10° to 50°C (14° to 122°F). Honeywell recommends that you
leave the eBase connected to its power source at all times, so that it is always ready to use.

We recommend use of Honeywell peripherals, power cables, and power adapters. Use of any non-Honeywell
! peripherals, cables, or power adapters may cause damage not covered by the warranty.

9-4
Connecting Power to the eBase Power Adapter

1. Plug the A/C power cord into the power adapter.

A/C Power Cord
2. Plug the power cable into the power connector on the back
of the eBase.
3. Plug the A/C power cord into a grounded power source.

Power Cable
Charging the Main Battery
The base provides power to the Dolphin terminal and allows the charging of the terminal’s
battery. The intelligent battery charging system incorporated into all Dolphin terminals
prevents overcharging, which means that Dolphin terminals may be stored in the base
indefinitely without damage to the terminals, battery packs, or the base. When the terminal is
docked, the base completes a full charge in 4 hours for the standard battery or 6 hours for the
extended battery.
For more information about Honeywell battery packs and how to check battery power levels
in your terminal, refer to Battery (page 2-9).

To Power a Terminal and Charge its Main Battery

Ensure all components are dry prior to mating terminals/batteries with
! peripheral devices. Mating wet components may cause damage not covered
by the warranty. 2

1. Install the battery pack in the terminal; see page 1-1.

2. Slide the terminal into the terminal well. The Dock LED illuminates blue. Battery charging begins immediately if required by
the Dolphin terminal.

Note: When the terminal is docked, the Battery Icon changes from to indicating the terminal is running on external
power. Battery charging occurs in the background. When the Dolphin is removed from the base, the battery icon indicates
the charge level of the battery, see Common Status and Notification Icons on page 1-7.

We recommend use of Honeywell Li-Ion battery packs. Use of any non-Honeywell battery may result in damage
! not covered by the warranty.

Charging a Spare Battery in the Auxiliary Battery Well

The auxiliary battery well located on the back of the base charges a spare battery
independently of the terminal well. The Aux Battery LED on the front panel indicates the
status of the battery in this well. Charge time is 4 hours for the standard battery pack or 6
hours for the extended battery pack; see Auxiliary Battery Well on page 9-3.
1. Insert the battery at an angle.
Note: Align the battery contacts with the contacts inside the auxiliary battery well.

2. Snap the battery into place with a hinging motion. The Aux Battery LED lights orange
during charging.
3. Use the AUX Battery LED to monitor the charging progress. The LED lights green when
the auxiliary battery has completed charging and is ready for use.

9-5
Communication
Establishing Ethernet Communication
Connecting the Dolphin Terminal to the eBase
By default, the Dolphin terminal is configured to obtain IP addresses automatically via DHCP server. This means that
in most cases you would simply plug-and-play the unit.
1. Connect power to the eBase (see Power on page 9-4).
2. Plug the CAT-5 Ethernet cable into the RJ45 connector on the back of the eBase.
3. Plug the Ethernet cable into the network.
4. Insert the Dolphin into the terminal well. The Dock LED on the base illuminates blue.

5. Touch All Apps > Settings > Ethernet configuration.

6. Check the box to Turn on Ethernet. When an Ethernet connection is established the status icon changes from
to at the top of the screen.

Troubleshooting
If the items on the Ethernet configuration screen are grayed out and not accessible, verify the base has power, the
Ethernet cable is undamaged and properly installed to the base, there is an active network signal over the Ethernet
cable, and the terminal is properly docked in the base.
Ethernet Configuration Settings
Instead of using the default DHCP assigned IP address, the Dolphin terminal can be configured to use a statically
assigned IP address.

1. Touch All Apps > Settings > Ethernet configuration.

2. Select Ethernet configuration, again.
3. Select Static IP under Connection Type, and then input the IP address and any additional information based on
your network configuration.
4. Touch Save.

Ethernet Proxy Settings

To set up a proxy to use when accessing your network with Ethernet:

1. Touch All Apps > Settings > Ethernet proxy settings.

2. Input the Proxy host name and Proxy port. If required, designate when to bypass the proxy.
3. Select Done.

Displaying the eBase and Terminal IP Address

Once the Dolphin terminal has been successfully connected to the network through eBase, the terminal uses the
eBase IP address. The IP address can be used by any application on the Dolphin terminal.

Touch All Apps > Settings > About Phone > Status to view the assigned IP Address.

9-6
 Establishing USB Communication
Dolphin terminals support USB communications out of the box. The base also supports USB communications via the USB
port located on the back. The base acts as a USB device by interfacing the USB signals of the Dolphin terminal to the USB
of the host workstation. Using a standard USB cable, the base’s USB interface allows the Dolphin terminal to communicate
with a workstation.
Note: This base cannot be daisy-chained.

Requirements
• A base powered by a power cable and power adapter cable
• A standard USB (Type A to B) communication cable
• A work station running Windows XP, Windows Vista, Windows 8 or Windows 7.

Setting Up and Connecting the Dolphin Terminal to an eBase

1. Connect power to the HomeBase (see Power on page 9-4).
2. Plug the USB communication cable into the USB port on the back of the base. The Dolphin terminal should always
be removed from the HomeBase when connecting or disconnecting the USB cable.
3. Connect the other end of the USB cable to the host workstation.
4. Insert the Dolphin terminal into the terminal well of the base. The Dock LED illuminates blue.
5. Select either Connected as a media device (MTP) or Camera (PTP). Your selection is stored as the default but is
easy to change by accessing the Notification panel. Swipe down from the Status/Notification bar at the top of the
screen to view USB connection details and change the connection type.

On the status bar, the following notification briefly appears to indicate the hardware connection has been estab-
lished:
Connected as a media device or Connected as a camera
6. You can now copy, delete and/or move files or folders between the computer and the terminal or the microSD card
installed in the terminal as you would with any other storage drive (e.g., cut and paste or drag and drop).
Note: When you connect as a Camera (PTP) only the DCIM and Pictures Folders from the Internal Storage show in File
Explorer or Windows Explorer.

Mounting the eBase

Set the base on a dry, stable surface, such as a desktop or workbench near an electrical outlet. Be sure to provide enough
workspace with good lighting for the user to view and operate the Dolphin terminal while it is in the base. When choosing a
mounting location, bear in mind that the location must allow users' easy access to the Auxiliary Battery Well and the back panel
of the eBase where the USB port, Ethernet port, and power jack are located.

Optional DIN Rail Mount

A DIN rail (7.5 X 35 mm) may be installed on the bottom of the base to provide the optional security of mounting the base to
a flat horizontal surface with hardware.

Additional Hardware
• DIN Rail, Qty. 1
• 3/16 in. dia x 5/8 in. long pan head screw, Qty. 2
• 1/2 in. OD x 7/32 in. ID x 3/64 in. thick washer, Qty. 4
• 3/16 in. dia nut, Qty. 2
Note: The items listed above are for reference only. Final hardware selection is dependent on the material type and
thickness of the mounting surface.

9-7
 Installing the DIN Rail
1. Slide the DIN rail into the slot along the bottom panel of the base.

DIN Rail Slot

2. Use the appropriate hardware to secure the DIN rail to the desk or flat surface.

9-8
10
Dolphin 70e Black Mobile Base (Model 70e-MB)

Overview
The Dolphin Mobile Base charging cradle is designed specifically for in-premise and in-transit data collection applications. The
base features a mounting bracket and a cigarette lighter adapter to adapt it to your environment.
The 70e-MB charger is designed for use with the following Dolphin models and batteries manufactured for Honeywell
International Inc:

Dolphin Model Battery Model No. Battery Part No. Battery Specification

Dolphin 75e 70e-BTSC BAT-STANDARD-02 Li-ion 3.7V, 6.179 watt hour

70e-BTEC BAT-EXTENDED-02 Li-ion 3.7V, 12.358 watt hour

We recommend use of Honeywell peripherals, power cables, and power adapters. Use of any non-Honeywell
! peripherals, cables, or power adapters may cause damage not covered by the warranty.

Charging Overview
The base provides power to the intelligent battery charging system in all terminals that senses when a full charge has been
achieved and switches to a trickle charge to maintain the full charge. The base completes a full charge of the main battery in 4
hours for the standard battery pack or 6 hours for the extended battery pack.
Note: Before attempting to use, charge, or replace the battery in the terminal, you should read the Guidelines for
Battery Pack Use and Disposal on page 2-12.

We recommend use of Honeywell Li-Ion battery packs. Use of any non-Honeywell battery may result in
! damage not covered by the warranty.

Convenient Storage
Intelligent battery charging makes the base a safe and convenient storage receptacle for your Dolphin terminal.

Dimensions
42.15 mm
[1.66 inches]

109.82 mm
[4.32 inches]

159.98 mm
[6.30 inches]

Weight
Mobile Base and adjustable arm weight: 270g [.595 lbs]

10 - 1
Mobile Base Components
Terminal Charging Well

Speaker Spring Latch

Power Adapter

Power Jack

Speaker Volume Control

Mounting Lever

Two point Adjustable

Arm
Suction Cup Base

Adjustable Arm with Suction Cup Base for Windshield Mounting

The Mobile Base includes a two point adjustable arm with a suction cup base for fixed mount locations (e.g., a car windshield).

Power Adapter
The mobile base is provided with a power adapter cable that can be connected to a vehicle cigarette lighter outlet.

UL listed power supply

Input: 10V - 30VDC, 0.43A(30V) - 1.28A(10V)
Output: 4.75V - 5.25VDC, 0 - 2A
Verify that the power source is always within the specified range and observe correct input voltage polarity. An
! improper input voltage range or reverse polarity could damage the power conversion circuitry.

Speaker and Volume Control Dial

The integrated speaker amplifies the Dolphin terminal’s audio signals and the speaker volume is adjusted using the dial
located on the side of the base.

Spring Latch
The spring latch secures the terminal in the Mobile Base charging well.

Terminal Charging Well

Place the terminal in this well to charge the battery.

10 - 2
Mounting the Mobile Base
Safety Precautions
Honeywell is not responsible for any damages caused to you, your vehicle, or other individuals due to the installation of the
Dolphin Mobile mount. Follow these safety precautions when mounting the mobile base:

Do not mount the base in a location where it prevents safe operation of the vehicle and/or impedes the vehicle
! operator's field of view.

Do not mount the base in a location where the connectors on the bottom panel of the base are not easily
! accessible. Be sure to leave enough room for unrestricted cable connections.

The Mobile base is intended for use in an enclosed space protected from the elements. Do not mount the
! Mobile base on external vehicle surfaces.

Do not install the Mobile base in an air bag deployment zone. Honeywell assumes no responsibility of liability
! for injury or death because of car crashes and/or air bag deployment.

Installation
1. Push the suction cup base firmly to the windshield.

Suction Cup Base

2. Flip the mounting lever down to secure the suction cup.

Mounting Lever

10 - 3
 3. To adjust the angle of the bracket arm, twist the thumb screws counterclockwise to loosen the locks. Reposition the
angle of the arm, and then twist the knobs clockwise to lock the arm into position.

Thumb screws for arm angle

adjustments.

4. Insert the power cable connector into the power jack on the Mobile Base.
5. Twist the cable connector 90° clockwise to engage the cable lock.

4 5

6. Plug the power adapter into the vehicle power outlet (e.g., cigarette lighter outlet)

Charging the Main Battery

The mobile base provides power to the Dolphin and allows charging of the main batteries in the terminal. The main battery
charges in 4 hours for the standard battery or 6 hours for the extended battery. The intelligent battery charging system
incorporated into all Dolphin terminals prevents overcharging, which means that terminal may be seated in the base indefinitely
without damage to the terminal, battery pack, or the base.
For more information about Honeywell battery packs and how to check battery power levels in your terminal, refer to Battery
(page 2-9).

10 - 4
To Power a Terminal and Charge its Main Battery
Ensure all components are dry prior to mating terminals/batteries with peripheral devices. Mating wet
! components may cause damage not covered by the warranty.

We recommend use of Honeywell Li-Ion battery packs. Use of any non-Honeywell battery may result in damage
! not covered by the warranty.

1. Install the main battery in the terminal; see Install the Battery on page 1-1.
2. Mount the Mobile base and install the power cable; see Mounting the Mobile Base on page 10-3.
3. Pull the spring latch back and insert the Dolphin 75e into the terminal well. Charging begins immediately if required by
the Dolphin terminal.

Note: Align the contacts on the back panel of the terminal with the charging contacts on the Mobile Base.

10 - 5
Removing the Cable
Attempting to remove the cable without disengaging the lock may result in damage
! to the base and power cable not covered by the warranty.

1. Twist the cable 90° counterclockwise to disengage the cable lock.

2. Remove the cable from the power jack.

1
2

10 - 6
11
Dolphin 70e Black ChargeBase (Model 70e-CB)

Overview
The Dolphin 70e Black ChargeBase is a 4-slot charging cradle that can power four Dolphin terminals, and charge their main
batteries in 4 hours for the standard battery or 6 hours for the extended battery. The 70e-CB charger is designed for use with the
following Dolphin models and batteries manufactured for Honeywell International Inc:

Dolphin Models Battery Model No. Battery Part No. Battery Specification

Dolphin 75e 70e-BTSC BAT-STANDARD-02 Li-ion 3.7V, 6.179 watt hour

Dolphin 70e
70e-BTEC BAT-EXTENDED-02 Li-ion 3.7V, 12.358 watt hour

We recommend use of Honeywell peripherals, power cables, and power adapters. Use of any non-Honeywell
! peripherals, cables, or power adapters may cause damage not covered by the warranty.

Unpacking the ChargeBase

Open the shipping box and inspect the package to see that the following standard items are included:
• One Dolphin ChargeBase, model 70e-CB
• One power supply (see Power on page 11-3)
• One power cord
These items are needed to operate the ChargeBase. If any items are missing or anything appears to be damaged, contact your
Customer Account Representative. Keep the original packaging in case you need to return the ChargeBase for service or to
store the ChargeBase while not in use.

Charging Overview
The base supplies power to the intelligent battery charging system in all Dolphin terminals, which senses when a full charge has
been achieved and switches to a trickle charge to maintain the full charge. As battery packs charge, the charging circuitry
follows the two-step charging process (CC-CV) that is recommended for the battery type. The process monitors changes in
temperature, current, and voltage. The main battery of each terminal charges in 4 hours for the standard battery or 6 hours for
the extended battery.
Note: Before attempting to use, charge, or replace the battery in the terminal, you should read the Guidelines for Battery Pack
Use and Disposal on page 2-12.

We recommend use of Honeywell Li-ion battery packs. Use of any non-Honeywell battery may result in damage
! not covered by the warranty.

Convenient Storage
The intelligent battery charging system makes this base a safe and convenient storage receptacle for your Dolphin terminal.

Capacity
The base holds up to four Dolphin terminals. Each charging well charges each terminal independently of the other wells.

11 - 1
Dimensions
59.75 mm
[2.35 inches]

427.11 mm
[16.80 inches]

98.8 mm
[3.89 inches]

Weight
ChargeBase weight: 674g [1.49 lbs.]
Note: Weight excludes packaging, cables and power supply.

Parts and Functions

Front Panel

Terminal Wells (Qty. 4)

Dock LED (Qty. 4)

Terminal Wells
The base contains four terminal wells, which offer independent battery charging for each docked terminal.

Dock LEDs
The Dock LED indicates if the terminal is properly seated in the charging well. Each well has a dedicated Dock LED, which
illuminates blue when a terminal is properly seated in the charging well.

11 - 2
Back Panel

Power Supply Connector

Power Supply Connector

This connector receives input from the power adapter. Plug the power connector cable from the power adapter into this
connector.

Bottom Panel
For details on how to mount the base, see Mounting the ChargeBase on page 11-4.

Serial Number Label

Compliance Label

Power
The terminal requires 12 Volts DC input for battery charging and power output to the terminal. The power adapter included with
the base, converts the voltage from the AC power source to 12 volts DC. Use only a UL Listed power supply, which has been
qualified by Honeywell with output rated at 12VDC and 5 amps with the device. The operating temperature range is -10° to
50°C (14° to 122°F).
Honeywell recommends that you leave the ChargeBase connected to its power source at all times, so that it is always ready to
use.

We recommend use of Honeywell peripherals, power cables, and power adapters. Use of any non-Honeywell
! peripherals, cables, or power adapters may cause damage not covered by the warranty.

11 - 3
 Connecting Power to the ChargeBase
Power LED

A/C Power Cord

Power Connector Cable

Power Adapter

1. Plug the A/C power cord into the power adapter.

2. Plug the power cable into the power connector on the back of the ChargeBase.
3. Plug the A/C power cord into a grounded power source.
4. The base is ready to begin charging terminals.

Charging the Main Battery

The base provides power to the Dolphin terminals and allows charging of the batteries in the terminals. The battery of each
terminal charges in 4 hours for the standard battery or 6 hours for the extended battery. The intelligent battery charging
system incorporated into all Dolphin terminals prevents overcharging, which means that Dolphin terminals may be seated
in the base indefinitely without damage to the terminals, batteries, or the base.
For more information about Honeywell battery packs and how to check battery power level in your terminal, refer to Battery
(page 2-9).

To Power a Terminal and Charge its Main Battery

Ensure all components are dry prior to mating terminals/batteries with peripheral devices. Mating wet
! components may cause damage not covered by the warranty.

1. Install the battery in the terminal, see Install the Battery on page 1-1.
2. Insert the Dolphin terminal into one of the four terminal wells. The Dock LED for the well illuminates blue. Charging
begins immediately if required by the Dolphin terminal.

Note: When the terminal is docked, the Battery Icon changes from to indicating the terminal is running on external
power. Battery charging occurs in the background. When the Dolphin is removed from the base, the battery icon
indicates the charge level of the battery, see Common Status and Notification Icons on page 1-7.

We recommend use of Honeywell Li-ion battery packs. Use of any non-Honeywell battery may result in damage
! not covered by the warranty.

Mounting the ChargeBase

Set the base on a dry, stable surface, such as a desktop or workbench near an electrical outlet. Be sure to provide enough
workspace with good lighting for the user to view and operate the Dolphin terminal while it is in the base. When choosing a
location, keep in mind that the mounting location must allow users to see the LEDs and provide easy access to the terminal
wells and the power jack.

11 - 4
Bottom Panel

DIN Rail Slot

Rubber Feet, Qty. 6

Optional DIN Rail Mount

A DIN rail (7.5 X 35 mm) may be installed on the bottom of the base to provide the optional security of mounting the base to
a flat horizontal surface with hardware.

Additional Hardware
• DIN Rail, Qty. 1
• 3/16 in. dia x 5/8 in. long pan head screw, Qty. 2
• 1/2 in. OD x 7/32 in. ID x 3/64 in. thick washer, Qty. 4
• 3/16 in. dia nut, Qty. 2
Note: The items listed above are for reference only. Final hardware selection is dependent on the material type and
thickness of the mounting surface.

Installing the DIN Rail

1. Slide the DIN Rail into the DIN Rail slot on the bottom panel of the base.

DIN Rail

2. Turn the base and DIN Rail right side up.

3. Use the appropriate hardware to secure the DIN Rail to a stable, flat horizontal surface.

11 - 5
11 - 6
12
Dolphin 70e Black Net Base (Model 70e-NB)

Overview
The Net Base enables up to four Dolphin 75e handheld computers to communicate with a host device over an Ethernet network.
In addition, the Net Base provides a second RJ45 Ethernet port for connection to an additional device such as a printer,
workstation, Net Base, or another Net Base. The 70e-NB charger is designed for use with the following Dolphin models and
batteries manufactured for Honeywell International Inc:

Dolphin Model Battery Model No. Battery Part No. Battery Specification

Dolphin 75e 70e-BTSC BAT-STANDARD-02 Li-ion 3.7V, 6.179 watt hour

Dolphin 70e
70e-BTEC BAT-EXTENDED-02 Li-ion 3.7V, 12.358 watt hour

We recommend use of Honeywell peripherals, power cables, and power adapters. Use of any non-Honeywell
! peripherals, cables, or power adapters may cause damage not covered by the warranty.

Unpacking the Net Base

Open the shipping box and inspect the package to see that the following standard items are included:
• One Dolphin Net Base Ethernet cradle, model 70e-NB
• One power supply (see Power on page 12-4)
• One power cord
These items are needed to set up and operate the Net Base. If any items are missing or anything appears to be damaged,
contact your Customer Account Representative. Keep the original packaging in case you need to return the Net Base for service
or to store the Net Base while not in use.

Optional Equipment
A standard CAT-5 Ethernet network cable is required when using the Net Base for communication between the terminal(s)
and a host device over an Ethernet network.

Charging Overview
The base supplies power to the intelligent battery charging system in all Dolphin terminals, which senses when a full charge has
been achieved and switches to a trickle charge to maintain the full charge. As battery packs charge, the charging circuitry
follows the two-step charging process (CC-CV) that is recommended for the battery type. The process monitors changes in
temperature, current, and voltage. The main battery of each terminal charges in 4 hours for the standard battery or 6 hours for
the extended battery.
Note: Before attempting to use, charge, or replace the battery in the terminal, you should read the Guidelines for Battery Pack
Use and Disposal on page 2-12.

We recommend use of Honeywell Li-ion battery packs. Use of any non-Honeywell battery may result in damage
! not covered by the warranty.

Convenient Storage
The intelligent battery charging system makes this base a safe and convenient storage receptacle for your Dolphin terminal.

Capacity
The base holds up to four Dolphin terminals. Each charging well charges each terminal independently of the other wells.

12 - 1
Dimensions
59.75 mm
[2.35 inches]

427.11 mm
[16.80 inches]

98.8 mm
[3.89 inches]

Weight
Net Base weight: 694g [1.53 lbs.]
Note: Weight excludes packaging, cables and power supply.

Parts and Functions

Front Panel

Terminal Wells (Qty. 4)

Dock LED (Qty. 4)

Terminal Wells
The base contains four terminal wells, which offer independent battery charging for each docked terminal.

12 - 2
 DOCK LEDs
The Dock LED indicates if the terminal is properly seated in the charging well. Each well has a dedicated Dock LED, which
illuminates blue when a terminal is properly seated in the charging well.

Back Panel
Yellow LED (Qty. 1 Per Port)

Green LED (Qty. 1 Per Port)

Port 1: 10/100Mbps RJ45 Ethernet Port

DC Power
Port 2: 10/100Mbps RJ45 Ethernet Port Jack

RJ45 Ethernet Ports

The Net Base contains two RJ45 Ethernet ports. You can connect the Net Base to an Ethernet-compliant device to facilitate
Ethernet communication to and from the terminal by plugging a standard CAT-5 Ethernet cable into one of the two Ethernet
ports provided. The second RJ45 Ethernet port can be used for connection to an additional device such as a printer,
workstation, eBase, or another Net Base.
Note: The Net Base does not use a Spanning Tree Protocol (STP). When both RJ45 Ethernet ports are used, do not
connect both Net Base interfaces to the same layer 2 LAN.

Each RJ45 Ethernet port has a dedicated green and yellow status LED.

Status Yellow LED Green LED

No Ethernet Link Off Off
10Mbps Ethernet Connection Established Off On
100Mbps Ethernet Connection Established On On
Data transfer in progress Connection Speed Dependent Flashing
(see above)

Note: The terminal and Ethernet link must be set up properly to allow the terminal to communicate to other devices and/or
the Internet. For more information, see Establishing Ethernet Communication on page 12-5.

DC Power Jack
This connector receives input from the power adapter. Plug the power connector cable from the power adapter into this
connector, see Power.

12 - 3
Bottom Panel
For details on how to mount the base, see Mounting the Net Base on page 12-6.
MAC Address Label

Serial Number Label

Compliance Label

Power
The terminal requires 12 Volts DC input for battery charging and power output to the terminal. The power adapter included with
the base, converts the voltage from the AC power source to 12 volts DC. Use only a UL Listed power supply, which has been
qualified by Honeywell with output rated at 12VDC and 5 amps with the device. The operating temperature range is -10° to
50°C (14° to 122°F).
Honeywell recommends that you leave the Net Base connected to its power source at all times, so that it is always ready to use.

We recommend use of Honeywell peripherals, power cables, and power adapters. Use of any non-Honeywell
! peripherals, cables, or power adapters may cause damage not covered by the warranty.

Connecting Power to the Net Base Power LED

1. Plug the A/C power cord into the power
adapter.
A/C Power Cord
2. Plug the power cable into the power connector
on the back of the Net Base.
3. Plug the A/C power cord into a grounded
power source.
4. The base is ready to begin charging terminals. Power Connec
Cable
Charging the Main Battery Power Adapter

The base provides power to the Dolphin terminals

and allows charging of the batteries in the
terminals. The battery of each terminal charges in 4 hours for the standard battery or 6 hours for the extended battery. The
intelligent battery charging system incorporated into all Dolphin terminals prevents overcharging, which means that Dolphin
terminals may be stored in the base indefinitely without damage to the terminals, battery packs, or the base.
For more information about Honeywell battery packs and how to check battery power levels in your terminal, refer to Battery
(page 2-9).

To Power a Terminal and Charge the Main Battery

Ensure all components are dry prior to mating terminals/batteries with peripheral devices. Mating wet
! components may cause damage not covered by the warranty.

12 - 4
 1. Install the battery in the terminal, see page 1-1.
2. Slide the Dolphin terminal into one of the four terminal wells. The Dock LED for the well illuminates blue. Charging
begins immediately if required by the Dolphin terminal.

Note: When the terminal is docked, the Battery Icon changes from to indicating the terminal is running on external
power. Battery charging occurs in the background. When the Dolphin is removed from the base, the battery icon
indicates the charge level of the battery, see Common Status and Notification Icons on page 1-7.

We recommend use of Honeywell Li-ion battery packs. Use of any non-Honeywell battery may result in damage
! not covered by the warranty.

Communication
Establishing Ethernet Communication
Connecting the Dolphin Terminal to the Net Base
By default, the Dolphin terminal is configured to obtain IP addresses automatically via DHCP server. This means that
in most cases you would simply plug-and-play the unit.
1. Connect power to the Net Base (see Power on page 12-4).
2. Plug the CAT-5 Ethernet cable into the RJ45 connector on the back of the Net Base.
3. Plug the Ethernet cable into the network.
4. Insert the Dolphin into the terminal well. The Dock LED for the well illuminates blue.

5. Touch All Apps > Settings > Ethernet configuration.

6. Check the box to Turn on Ethernet. When an Ethernet connection is established the status icon changes from
to at the top of the screen.

Troubleshooting
If the items on the Ethernet configuration screen are grayed out and not accessible, verify the base has power, the
Ethernet cable is undamaged and properly installed to the base, there is an active network signal over the Ethernet
cable, and the terminal is properly docked in the base.
Ethernet Configuration Settings
Instead of using the default DHCP assigned IP address, the Dolphin terminal can be configured to use a statically
assigned IP address.

1. Touch All Apps > Settings > Ethernet configuration.

2. Select Ethernet configuration, again.
3. Select Static IP under “Connection Type”, then input the IP address and any additional information based on your
network configuration.
4. Touch Save.

Ethernet Proxy Settings

To set up a proxy to use when accessing your network with Ethernet:

12 - 5
 1. Touch All Apps > Settings > Ethernet proxy settings.
2. Input the Proxy host name and Proxy port. If required, designate when to bypass the proxy.
3. Select Done.

Displaying the Net Base and Terminal IP Address

Once the Dolphin terminal has been successfully connected to the network through Net Base, the terminal uses the
Net Base IP address. The IP address can be used by any application on the Dolphin terminal.

Touch All Apps > Settings > About Phone > Status to view the assigned IP Address.

Mounting the Net Base

Set the Net Base on a dry, stable surface, such as a desktop or workbench near an electrical outlet. Be sure to provide enough
workspace with good lighting for the user to view and operate the Dolphin terminal while it is in the Net Base. When choosing a
location, bear in mind that the mounting location must allow users to see the LEDs and provide easy access to the terminal
wells, the Ethernet ports, and the power jack.

Bottom Panel

DIN Rail Slot

Rubber Feet, Qty. 6

Optional DIN Rail Mount

A DIN rail (7.5 X 35 mm) may be installed on the bottom of the base to provide the optional security of mounting the base to
a flat horizontal surface with hardware.

Additional Hardware
• DIN Rail, Qty. 1
• 3/16 in. dia x 5/8 in. long pan head screw, Qty. 2
• 1/2 in. OD x 7/32 in. ID x 3/64 in. thick washer, Qty. 4
• 3/16 in. dia nut, Qty. 2
Note: The items listed above are for reference only. Final hardware selection is dependent on the material type and
thickness of the mounting surface.

12 - 6
Installing the DIN Rail
1. Slide the DIN Rail into the DIN Rail slot on the bottom panel of the base.

DIN Rail

2. Turn the base and DIN Rail right side up.

3. Use the appropriate hardware to secure the DIN Rail to a stable, flat horizontal surface.

12 - 7
12 - 8
A
Dolphin 75e Terminal Agency Information

Dolphin 75e handheld computers meet or exceed the requirements of all applicable organizations that set standards for safe
operation. The best way to ensure safe operation is to use the handheld computer according to the agency guidelines in this
user guide and on the regulatory sheet shipped with the terminal. Read all guidelines before using your Dolphin terminal. To
download product documentation for the Dolphin 75e handheld computer, go to www.honeywellaidc.com.
This documentation is relevant for the following Dolphin model: 75eL0N.

Caution: Read the Guidelines for Battery Pack Use and Disposal on page 3-16 and all cautionary markings on the
battery, charging peripheral, or device using the battery before attempting to install, use, or charge the
! battery. Risk of fire and burns if improperly handled. Do not open, crush, heat above 60°C (140°F), or
incinerate.

Label Locations
Compliance Labels and Marks

Back Panel of the terminal with the battery door

and battery removed.

Model Number and Serial Number

The model (item) number and serial number for the terminal are located on labels affixed to the bottom of the battery well.

RF Exposure Information (SAR)

This handheld computer meets the government's requirements for exposure to radio waves. This handheld computer is
designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal
Communications Commission of the U.S. Government.
The exposure standard for wireless devices employs a unit of measurement known as the Specific Absorption Rate, or SAR.
The SAR limit set by the FCC is 1.6 W/Kg and for Europe 2 W/Kg. Although the SAR is determined at the highest certified
power level, the actual SAR level of the handheld computer while operating can be well below the maximum value. This is
because the device is designed to operate at multiple power levels so as to use only the poser required to reach the network. In
general, the closer you are to a wireless base station antenna, the lower the power output.
The highest reported SAR values for head and body-worn accessory are: 0.367 W/kg (1 g) for body and 0.596 W/kg (1 g) for
head.
The highest reported CE SAR values for head and body-worn accessory are: 0.170 W/kg (10 g) for body and 0.310 W/kg (10 g)
for head.
While there may be differences between the SAR levels of various handheld computer and at various positions, they all meet
the government requirement.
The FCC has granted an Equipment Authorization for this handheld computer with all reported SAR levels evaluated as in
compliance with the FCC RF exposure guidelines. SAR information on this handheld computer is on file with the FCC and can
be found under the Display Grant section of www.fcc.gov/oet/ea/fccid after searching on FCC ID: HD5-75EL0N.

A-1
A-2
Honeywell Scanning & Mobility
9680 Old Bailes Road
Fort Mill, SC 29707
www.honeywellaidc.com

75E-AND-ENUS-UG Rev A
5/15