SM2232E
SM2532E
SM2632E
Self-Propelled Aerial Work Platforms
W ith their compact size and convenient
operation, the SM2232E , SM2532E and
SM2632E are the ideal choices for a variety
of industrial, commercial and construction applications.
CONTROLS
The SM2232E and SM2532E will fit into most standard
elevators while the SM2632E is compact enough to fit
into most freight elevators, making these models per-
fect for use in multi-story buildings.
Advantages:
• Increased Jobsite Accessibility - Compact
dimensions allow the machines to be driven
through standard doorways and into most freight
elevators for multi-story applications.
• Excellent Maneuverability - the combination
of the compact size and tight turning radius
Standard multi-step controller provides 2-speed drive and lift con-
provides exceptional maneuverability in tight
trol, and one-hand control of drive and steer.
quarters.
• Component Accessibility - Swing-out Removable weather resistant upper control console
compartment doors provide easy access to all permits on or off-platform operation. Multi-step con-
hydraulic, electrical components. troller with thumb steer for drive and lift. Toggle
switch for high/low drive speed. Selector switch for
Check these standard features: drive/lift. Emergency stop push button. Function
• Heavy duty all-steel welded platform enable push button with indicator light designed to
• 3 ft. (0.91 m) slide-out deck extension prevent inadvertent operation. Color coded universal
• Multi-step controller for drive/ lift with thumb steer symbols aid in function identification.
• 110 V AC power to the platform
• Automatic battery charger POWER PLANT
• Low maintenance greaseless scissor arm bushings Permanent magnet DC motor with thermal protec-
• Non-marking solid rubber tires tion, 4 hp. Powered by four 6-volt 200 amp-hour bat-
teries.
Standard Equipment
Built-in 110-volt 60 Hz AC 24-volt, 20 amp DC auto-
PLATFORM matic battery charger.
Diamond-embossed steel platform deck with 6 in.
(0.15 m) toeboard and removable 39.75 in. (1.01 m) Lockable master battery disconnect switch.
high railing.
HYDRAULIC SYSTEM
2-section, positive displacement gear pump delivers a
maximum 2 gpm (7.57 lpm) @ 3,000 psi on the
SM2232E and SM2532E; 4 gpm (15.1 lpm) @ 3,000 psi
on the SM2632E.
10 micron in-tank return filter with replaceable car-
tridge.
CHASSIS
Front-wheel hydrostatic drive with counterbalance
valve for dynamic braking. Spring applied/-hydrauli-
cally released rear wheel lock for holding machine sta-
tionary on firm level surfaces. Wheel lock features
Standard 3 ft. (0.91 m) roll-out deck extension with 3 position lock
provides additional reach and over 7 sq. ft. (0.65 m3) of additional
manual release for towing and loading.
platform work space.
Cylinder-actuated, electro-hydraulic front-wheel steer
provides a tight turning radius.
• Fork lift pockets
• Motion alarm
• Tilt alarm
• Lift/tie-down points
Swing-out compartment doors provide excellent access to hydraulic and
electric components.
Options -- All Models
• 800-watt 110-volt self contained power For reaching over obstacles, the SM2632E offers an optional 6 ft. (1.8 m)
• 6 ft. (1.8 m) powered deck extension hydraulically operated deck extension with a capacity of 700 lbs. (317 kg).
(Note: Unit cannot be driven with optional deck extended.)
(SM2632E only) - 700 lbs. capacity
• Amber rotating beacon
• Battery level indicator
• Hourmeter
• "EE" rating (ANSI/UL 583)
The top rail at the platform entrance is removable to allow materials to
be easily loaded.
Compact dimensions allow access through standard doorways with rails Fork lift pockets simplify loading and unloading and are ideal for trans-
installed. port around large job-sites.
Specifications
SM2232E SM2532E SM2632E
Platform
Working Height 22 ft. (6.71 m) 25 ft. (7.62 m) 26 ft. (7.92 m)
Platform Height 16 ft. (4.88 m) 19 ft. (5.79 m) 20 ft. (6.07 m)
Platform Capacity 500 lbs. (227 kg) 500 lbs. (227 kg) 750 lbs. (340 kg)
Dimensions
Platform Size 31.75 x 63 in. (0.81 x 1.60 m) 31.75 x 63 in. (0.81 x 1.60 m) 31.75 x 88 in. (0.81 x 2.23 m)
Roll Out Deck Extension 36 in. (0.91 m) 36 in. (0.91 m) 36 in. (0.91 m)
Overall Height (stowed) 76 in. (1.93 m) 76 in. (1.93 m) 77.6 in. (1.97 m)
Overall Length 66 in. (1.67 m) 66 in. (1.67 m) 88.4 in. (2.24 m)
Overall Width 32 in. (0.81 m) 32 in. (0.81 m) 32.75 in. (0.83 m)
Wheelbase 50.25 in. (1.28 m) 50.25 in. (1.28 m) 72.6 in. (1.84 m)
Outside Turning Radius 6 ft. 1 in. (1.85 m) 6 ft. 1 in. (1.85 m) 8 ft. 2 in. (2.49 m)
Inside Turning Radius 1 ft. 7 in. (0.48 m) 1 ft. 7 in. (0.48 m) 2 ft. 6 in. (0.76 m)
Ground Clearance 2 5/8 in. (0.07 m) 2 5/8 in. (0.07 m) 4 in. (0.1 m)
Performance
Maximum Drive Speed 2.0 mph (3.2 km/h) 2.0 mph (3.2 km/h) 2.0 mph (3.2 km/h)
Gradeability (Theoretical)* 20% 20% 20%
Wheel Locks Hydraulic cylinder Hydraulic cylinder Hydraulic cylinder
Lift Speed 20 seconds 35 seconds 27 seconds
Lower Speed 15 seconds 35 seconds 35 seconds
Tire Size 200 x 8 200 x 8 300 x 8
Tire Fill Solid non-marking Solid non-marking Solid non-marking
Power Source
System Voltage 24 volts 24 volts 24 volts
Number of Batteries 4 (6 volts) 4 (6 volts) 4 (6 volts)
Battery Amp-Hours 200 200 200
Charger Amps 20 20 20
Hydraulics
Reservoir Capacity 2.5 gal. (9.5 liters) 2.5 gal. (9.5 liters) 3.5 gal. (13.25 liters)
Pump Type 2 section Gear 2 section Gear 2 section Gear
Shipping Information
Weight 2,280 lbs. (1034 kg) 2,800 lbs. (1270 kg) 3,820 lbs. (1732 kg)
Shipping Cube 94 cu. ft. (2.66 m3) 94 cu. ft. (2.66 m3) 131 cu. ft. (3.7 m3)
*Published machine gradeability is theoretical. Machine to be in a stowed position.Always operate machine on a firm, level surface when elevated.
Dimensions
SM2232E SM2532E SM2632E
10' 1-1/2"
(3.09 m)
8' 3"
(2.51 m)
3' 3-3/4"
(1.01 m)
3' 3-3/4"
8' 3" (1.01 m)
(2.51 m)
STANDARD
ROLLOUT
3' 3-3/4"
(1.01 m) STANDARD DECK
ROLLOUT EXTENSION
DECK
EXTENSION
26'
(7.92 m)
STANDARD 25' WORKING
ROLLOUT (7.62 m) HEIGHT
DECK WORKING
EXTENSION HEIGHT
22'
(6.71 m)
WORKING
HEIGHT
20'
(6.07 m)
16' 19'
(4.88 m) (5.79 m)
5' 6" 5' 6" 7' 4"
(1.67 m) (1.67 m) (2.24 m)
31.75"
31.75" 31.75" (0.81 m)
(0.81 m) (0.81 m)
6' 5-1/2"
6' 4" 6' 4" (1.97 m)
(1.93 m) (1.93 m)
3' 3' 3' 1-1/2"
(0.92 m) (0.92 m) (0.96 m)
32" 32" 32.75"
(0.81 m) (0.81 m) (0.83 m)
The Grove
Manlift . . .
12
MONTHS
PARTS
WARRANTY
P
Now there's another reason to choose Grove
Manlift aerial work platforms! It's the Grove
RODUCT
ROTECTION
LAN
Manlift Product Protection Plan! Under this plan,
all new Grove Manlift aerial work platforms are
warranted to be free from defects in material and
workmanship for one full year. All structural
MONTHS
12 LABOR
WARRANTY
components, including booms, riser, masts,
turntables, frames and scissors arms, are covered
for six additional years!* Only Grove Manlift
has the confidence -- and the equipment -- to
make an offer this good.
MONTHS
84 STRUCTURAL
WARRANTY
*See manufacturer's warranty for any limitations or restrictions which may apply.
The strongest warranty in the industry . . . for the
strongest line in the industry!
Grove Worldwide - World Headquarters Constant improvement and engineering progress make it necessary that we reserve the right to make
1565 Buchanan Trail East specification, equipment, and price changes without notice. Illustrations shown may include optional
Shady Grove, Pennsylvania 17256 equipment and accessories and may not include all standard equipment. This work platform meets the
Phone: (717) 597-8121 Fax: (717) 597-4062 requirements, to the extent applicable, of US-DOL OSHA regulations and ANSI A92 standards in effect on
the date of manufacture.
Grove North America
P. O. Box 21, Shady Grove, Pennsylvania 17256
Western Hemisphere, Asia/Pacific
Phone: (717) 597-8121 Fax: (717) 597-4062
Grove Europe* Distributed By:
Sunderland, England SR4 6TT
Europe, Africa, Middle East, Near East
Phone: (Int + 44) 191 565-6281 Fax: (Int + 44) 191 565-3736
* Grove Europe Limited, Registered in England, Number 1845128, Registered office,
Crown Works, Pallion, Sunderland, Tyne & Wear, England SR4 6TT.
Grove Manlift Pty Ltd**
9 Altair Place, Penrith, NSW, 2750 Australia
Phone: (Int + 61) 47-229222 Fax: (Int + 61) 47-229202
** Grove Manlift Pty Ltd, Registered in Australia, A.C.N. 076 700 082
Delta Manlift
Z. I. de Fauillet
B. P. 20
47400 Tonneins, France
Phone: (Int + 33) {5} 384-8511 Fax: (Int + 33) {5} 379-0687
http://www.groveworldwide.com Form No. SBSM2232E/SM2532E/SM2632E Part No. 3-851 298-10M Printed in U.S.A.
