Pl2021-Gen Victaulic
Pl2021-Gen Victaulic
No alteration, modification or waiver of these terms and conditions whether on Customer’s purchase order or otherwise shall be valid unless the altera-
tion, modification or waiver is specifically accepted in writing by an authorized representative of Victaulic.
Prices, Designs and Terms and Conditions of Sale are subject to change without notice.
TERMS OF PAYMENT: As stated on invoice. Maximum legal interest rate charged thereafter.
SHIPPING TERMS: F.O.B. shipping point (our option) freight prepaid and allowed on single orders (excluding No. 26/No. W26 Outlet Fittings and Series 387 Inline/
Series 388 End Suction Pump Skids) having a net price value of $12500 and over for shipment at one time to one destination into distributor stock or direct ship to a
project, as determined by Victaulic within the continental United States, excluding Alaska, Hawaii, Puerto Rico and U.S. possessions.
Shipping and handling charges on orders less than net price value of $12500, F.O.B. shipping point (our option) will be paid by the customer. The most economical
routing to recognized delivery points will be used, at our discretion. The cost of any special routing, packaging or handling that has been requested by the customer,
and is a deviation to our normal handling methods, will be added to the order and paid by the customer.
Shipments beyond the borders of the United States are prepaid and chargeable or collectable to final destination.
Orders are accepted subject to approval of our General Office and Credit Department at Easton, Pennsylvania, and contingent upon acts of God, war, civil
disturbance, strikes, labor difficulties, delays of carriers, inability to obtain materials, accidents or any other cause beyond our control.
Victaulic will endeavor to ship by the scheduled delivery date, but reserves the right to ship within a reasonable period thereafter. Under no circumstances shall
Victaulic be liable for damages of any kind, including but not limited to incidental or consequential damages for lost profits or lost sales or
liquidated damages, directly or indirectly arising from delays or failure to meet
shipping dates.
Orders, when accepted, cannot be cancelled without our written consent. No material will be taken back without our written consent. Orders for non-standard
(i.e. non-cancellable/non-returnable) material may not be cancelled nor will Victaulic accept return of such material for credit. Victaulic reserves the
right to change the designation of products from standard to non-standard and vice versa. This may be done at any time without notice, and
without incurring obligation. For further information
contact Victaulic.
All material is carefully examined, counted and packed by experienced employees. Claims for corrections must be made within 10 days of receipt of goods to the
Around the world and across diverse business lines, Victaulic provides durable pipe joining solutions that Customer Care center in Easton, PA (1-800-PICK VIC). We prove our count by weight. Claims for shortages are subject to that test. Our responsibility ceases when goods
are delivered to carrier in good condition and its receipt obtained. Carriers are responsible for goods lost, damaged or delayed in transit. For your own protection, have
solve the construction industry’s toughest challenges. transportation company’s agent verify damages, shortages or delays and note them on freight bill over his signature.
Since 1919, Victaulic’s innovative piping products and design services continue to increase construction productivity and WEIGHTS: All weights are approximate shipping weights and subject to change without notice.
reduce risk, ensuring projects are completed safely, on time and within budget. Victaulic maintains a continual policy of product improvement and, therefore, reserves the right to change product specifications, designs, and standard equipment
without notice and without incurring obligation.
With more than 40 international facilities, Victaulic helps customers in 140 countries succeed in the
2.0 LIMITED WARRANTY
Warranty, Victaulic Contact Information
FIRE PROTECTION | HVAC | PLUMBING | OIL & GAS | MINING | WATER & WASTEWATER | POWER GENERATION | MARITIME How Long Coverage Lasts: This warranty runs for one year from the date of delivery to the original buyer.
What is Not Covered: This warranty shall not apply to any product which has been subject to misuse, negligence, or accident (such as, without limitation,
exposure to incompatible chemical or corrosive agents including microbial corrosion), which has been repaired or altered in any manner outside of Victaulic’s factory,
or which has been used in a manner contrary to Victaulic’s instructions or recommendations. This warranty shall not apply to any Victaulic products utilizing
proprietary grooves (such as, but not limited to, the Victaulic AGSTM, IGSTM, or PGS-300TM grooves) which have been used on pipe that has been grooved to ANSI/
AWWA C-606 standards or which was grooved using tools not supplied by Victaulic or its licensees. Victaulic shall not be responsible for design errors due to
inaccurate or incomplete information supplied by Buyer or its representatives.
What Victaulic will do: Victaulic will repair or replace, at its option, any product that proves to be defective in materials or workmanship following an examination by
Victaulic that shows to its satisfaction the product was defective in materials or workmanship.
THIS LIMITED WARRANTY IS EXCLUSIVE AND MADE EXPRESSLY IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. THE BUYER’S SOLE AND EXCLUSIVE REMEDY SHALL BE FOR THE REPAIR OR REPLACEMENT OF DEFECTIVE
PRODUCTS AS PROVIDED HEREIN. THE BUYER AGREES THAT NO OTHER REMEDY (INCLUDING, BUT NOT LIMITED TO, INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR
LOST PROFITS, LOST SALES, INJURY TO PERSON OR PROPERTY OR ANY OTHER INCIDENTAL OR CONSEQUENTIAL LOSS) SHALL BE AVAILABLE.
Victaulic neither assumes nor authorizes any person to assume for it any other liability in connection with the sale of products.
victaulic.com Items purchased by Victaulic and resold will have the original equipment manufacturer’s warranty extended to Victaulic customers.
How to Get Service: Contact Victaulic at 610-559-3300 within one year after delivery to the original buyer to arrange for an examination of the product. You will be
© 2021 VICTAULIC COMPANY. ALL RIGHTS RESERVED.
asked to ship the product to Victaulic’s factory, postage and transportation charges prepaid, for examination. There is no charge for examination. Victaulic will examine
Source: skyscrapercenter.com and the Council on Tall Buildings and Urban Habitat
the product and contact you within a reasonable time regarding the results of that examination and to arrange for repair or replacement of any product determined
to be defective in materials or workmanship.
EFFECTIVE AUGUST 28, 2020
Index
VICTAULIC.COM PL2021-GEN I
Index
II VICTAULIC.COM PL2021-GEN
Index
IV VICTAULIC.COM PL2021-GEN
Index
VICTAULIC.COM PL2021-GEN V
NOTE: Categories can have a single discount applied. Any individual discounts listed will take precedence over category discounts.
VI VICTAULIC.COM PL2021-GEN
Table of Contents
No. LW100 and LW110 Carbon Steel
Table of contents
VICTAULIC.COM PL2021-GEN IX
Table of Contents
Series 78U – Union Port Fitting. . . . . . . . . . . . . . . . . . . . 7-44 SECTION 9 – Vic-Press™ System
Coil Hose. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-45 for Schedule 10S Stainless Steel Pipe
Series 78Y and 78T Handle Extension. . . . . . . . . . . . . . . 7-45 Vic-Press™ System for Type 304 Schedule 10S
Stainless Steel Pipe
Replacement O-Rings . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-45
Style P500 Loose Seals. . . . . . . . . . . . . . . . . . . . . . . . . . . 9-3
Differential Pressure Controllers
Style P597 Standard Coupling. . . . . . . . . . . . . . . . . . . . . . 9-3
TA Series 793 – Threaded Ends. . . . . . . . . . . . . . . . . . . . 7-46
Style P596 Male Adapter – Threaded. . . . . . . . . . . . . . . . . 9-3
TA Series 794 – Flanged Ends. . . . . . . . . . . . . . . . . . . . . 7-46
Series P569 Type 316 Stainless Steel Ball Valve. . . . . . . . . 9-4
TA Series 782 Bypass Valve. . . . . . . . . . . . . . . . . . . . . . . 7-47
Series P589 Brass Body Ball Valve . . . . . . . . . . . . . . . . . . 9-4
TA Series 7PR. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-47
Style P586 90° Elbow – Short Tangent . . . . . . . . . . . . . . . 9-4
TA Series 7DA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-48
Style P542 90° Street Elbow. . . . . . . . . . . . . . . . . . . . . . . 9-5
TA Series 793 Insulation Kits. . . . . . . . . . . . . . . . . . . . . . 7-48
Style P591 45° Elbow . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-5
TA Series 793 Differential Pressure Control Valve &
TA Series 787H Balancing Valve with Drain Kit. . . . . 7-49 Style P543 45° Street Elbow . . . . . . . . . . . . . . . . . . . . . . . 9-5
TA Series 7DA Compact Differential Pressure Valve & Style P592 Tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-6
TA Series 787H Balancing Valve with Drain Kit. . . . . 7-50 Style P593 Tee – Reducing Branch. . . . . . . . . . . . . . . . . . 9-6
Differential Pressure Controller Accessories. . . . . . . . . . . 7-51 Style P588 Tee – Reducing Branch – Threaded. . . . . . . . . 9-7
Balancing Instruments Style P594 Concentric Reducer. . . . . . . . . . . . . . . . . . . . . 9-7
Dongle for Slider Actuators 7CP and 7MP . . . . . . . . . . . . 7-52 Style P595 Flange Adapter . . . . . . . . . . . . . . . . . . . . . . . . 9-8
TA Series 736 TA Link Differential Pressure Sensor. . . . . 7-52 Style P565 Flange Adapter . . . . . . . . . . . . . . . . . . . . . . . . 9-8
Universal Gauge Meter Conversion Kit. . . . . . . . . . . . . . . 7-52 Style P587 Transition Nipple. . . . . . . . . . . . . . . . . . . . . . . 9-8
SECTION 8 – Plain End Couplings and Fittings Style P584 Threaded Union. . . . . . . . . . . . . . . . . . . . . . . 9-9
Style 99 Roust-A-Bout Coupling. . . . . . . . . . . . . . . . . . . . . . . 8-2 Style P599 Female Adapter – Threaded. . . . . . . . . . . . . . . 9-9
Gaskets for Style 99 Couplings . . . . . . . . . . . . . . . . . . . . . . . . 8-2 Style P561 Adapter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-9
Plated Trackhead Bolts and Nuts . . . . . . . . . . . . . . . . . . . . . . 8-3 Style P540 End Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-10
No(s). 40-P, 42-P and 43-P Adapter Nipples. . . . . . . . . . . . . . 8-3 PFT510 Vic-Press™ Tool. . . . . . . . . . . . . . . . . . . . . . . . . 9-10
Plain End Fittings Vic-Press™ System for Type 304 Schedule 10S
No. 10-P – 90° Elbow. . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-4 Stainless Steel Pipe
No. 11-P – 45° Elbow . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-4 Style P500 Loose Seals. . . . . . . . . . . . . . . . . . . . . . . . . . 9-12
No. 20-P – Tee. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-4 Style P507 Standard Coupling. . . . . . . . . . . . . . . . . . . . . 9-12
No. 61-P – Bull Plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-4 Style P576 Male Adapter – Threaded. . . . . . . . . . . . . . . . 9-12
No. 33-P – Wye. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-5 Style P508 Slip Coupling. . . . . . . . . . . . . . . . . . . . . . . . . 9-13
No. 30-P – Lateral. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-5 Series P569 Stainless Steel Ball Valve. . . . . . . . . . . . . . . 9-13
No. 35-P – Cross. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-5 Series P569 Repair Kits. . . . . . . . . . . . . . . . . . . . . . . . . . 9-14
No. 53-P – Swaged Nipples. . . . . . . . . . . . . . . . . . . . . . . . 8-6 Series P589 Brass Body Ball Valve . . . . . . . . . . . . . . . . . 9-14
No. 25-P – Reducing Tee . . . . . . . . . . . . . . . . . . . . . . . . . 8-7 Style P568 90° Elbow – Short Tangent . . . . . . . . . . . . . . 9-14
QuickVic™ SD Installation-Ready™ System Style P562 90° Street Elbow. . . . . . . . . . . . . . . . . . . . . . 9-14
Style P07 Installation-Ready™ Coupling. . . . . . . . . . . . . . . 8-8 Style P571 45° Elbow . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-15
Style P08 Installation-Ready™ Slip Coupling . . . . . . . . . . . 8-8 Style P563 45° Street Elbow . . . . . . . . . . . . . . . . . . . . . . 9-15
Style P50 Installation-Ready™ Slip Coupling . . . . . . . . . . . 8-8 Style P572 Tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-15
No. P10 Installation-Ready™ 90° Elbow . . . . . . . . . . . . . . 8-9 Style P573 Tee – Reducing Branch. . . . . . . . . . . . . . . . . 9-16
No. P11 Installation-Ready™ 45° Elbow. . . . . . . . . . . . . . . 8-9 Style P578 Tee – Reducing Branch Threaded . . . . . . . . . 9-16
No. P20 Installation-Ready™ Tee . . . . . . . . . . . . . . . . . . . 8-9 Style P574 Concentric Reducer. . . . . . . . . . . . . . . . . . . . 9-17
No. P25 Installation-Ready™ Reducing Tee. . . . . . . . . . . 8-10 Style P575 Flange Adapter. . . . . . . . . . . . . . . . . . . . . . . . 9-17
No. P60 Cap. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-10 Style P566 Flange Adapter . . . . . . . . . . . . . . . . . . . . . . . 9-17
Replacement Retainer Rings . . . . . . . . . . . . . . . . . . . . . . 8-11 Style P577 Transition Nipple . . . . . . . . . . . . . . . . . . . . . . 9-18
No. P40 Threaded Adapter (Male NPT x Plain End). . . . . 8-11 Style P585 Threaded Union. . . . . . . . . . . . . . . . . . . . . . . 9-18
No. P80 Threaded Adapter (Female NPT x Plain End). . . 8-11 Style P579 Female Adapter – Threaded. . . . . . . . . . . . . . 9-18
No. P47 Straight Dielectric Adapter . . . . . . . . . . . . . . . . . 8-11 Style P560 End Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-19
No. P97 90° Elbow Dielectric Adapter. . . . . . . . . . . . . . . 8-12 PFT510 Vic-Press™ Tool. . . . . . . . . . . . . . . . . . . . . . . . . 9-19
Series P89 Ball Valve. . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-12
Series P89 Handle Extension. . . . . . . . . . . . . . . . . . . . . . 8-12
X VICTAULIC.COM PL2021-GEN
Table of Contents
SECTION 10 – HDPE Products No. 626 Reducing Tee Groove x Groove x Cup. . . . . . . . . 12-6
Style 905 Coupling for HDPE Pipe . . . . . . . . . . . . . . . . . . . . 10-2 No. 643 Copper Adapter Nipple. . . . . . . . . . . . . . . . . . . 12-6
Style 907 and Style W907 Transition Coupling for No. 650 Concentric Reducer Groove x Groove x Groove. . 12-6
HDPE-to-Steel Pipe. . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-3 No. 652 Concentric Reducer Groove x Cup. . . . . . . . . . . 12-7
Style 2971 Aquamine™ Transition Coupling for PVC to Series 608N Copper Connection Butterfly Valve. . . . . . . . . . 12-7
HDPE Pipe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-4
GDC-CTS Go/No-Go Groove Diameter Cable. . . . . . . . . . . . . 12-8
Style 908 Coupling for Double Grooved HDPE Pipe. . . . . . . . 10-5
SECTION 13 - Aluminum Products
Style 904 Flange Adapter for HDPE-to-Flanged Pipe. . . . . . . 10-6
Aluminum Couplings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-2
Style 926 Mechanical-T Spigot . . . . . . . . . . . . . . . . . . . . . . . 10-7
Aluminum Fittings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-2
Style 926 Spigot Hole Saw for HDPE Pipe. . . . . . . . . . . . . . . 10-7
SECTION 14 - Stainless Steel Products
Style 995N HDPE Coupling. . . . . . . . . . . . . . . . . . . . . . . . . . 10-8
Ductile Iron Couplings for Stainless Steel Pipe
Style 997 HDPE-to-Steel Transition Coupling. . . . . . . . . . . . . 10-8
Style 89 Rigid Coupling. . . . . . . . . . . . . . . . . . . . . . . . . . 14-2
HDPE Plain End Fittings
Style 889 Rigid Coupling for Potable Water Applications. 14-2
No. H10 – 90° Elbow. . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-9
Style W89 AGS Rigid Coupling. . . . . . . . . . . . . . . . . . . . . 14-3
No. H11 – 45° Elbow. . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-9
Stainless Steel and Duplex Couplings
No. H20 – Tee. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-9
Style 489 Rigid Coupling. . . . . . . . . . . . . . . . . . . . . . . . . 14-4
No. H50 – Concentric Reducer. . . . . . . . . . . . . . . . . . . . 10-9
Style 489DX Duplex Rigid Coupling. . . . . . . . . . . . . . . . . 14-4
Series 906 Knife Gate Valve for Plain End HDPE Pipe. . . . . 10-10
Style 475 Flexible Coupling . . . . . . . . . . . . . . . . . . . . . . . 14-5
CG3100/3300/3500 Cut Grooving Tool for HDPE Pipe . . . . 10-12
Style 475DX Duplex Flexible Coupling . . . . . . . . . . . . . . . 14-5
SECTION 11 – CPVC Products
Style 77DX Duplex Flexible Coupling . . . . . . . . . . . . . . . . 14-6
Style 356 Installation-Ready™ Transition Coupling . . . . . . . . 11-2
Style 77S Flexible Coupling. . . . . . . . . . . . . . . . . . . . . . . 14-6
Style 357 Installation-Ready™ Rigid Coupling. . . . . . . . . . . . 11-2
Stainless Steel Flange Adapters
Style 358 Reducing Coupling . . . . . . . . . . . . . . . . . . . . . . . . 11-3
Style 441 Vic-Flange Adapter. . . . . . . . . . . . . . . . . . . . . . 14-6
Style 856 Installation-Ready™ Transition Coupling for
Potable Water Applications. . . . . . . . . . . . . . . . . . . . . . . 11-4 No. 445F and No. 445R Stainless Steel
Flange Adapter Nipples . . . . . . . . . . . . . . . . . . . . . . 14-7
Style 857 Installation-Ready™ Rigid Coupling for
Potable Water Applications. . . . . . . . . . . . . . . . . . . . . . . 11-4 Style 422 Branch Outlet. . . . . . . . . . . . . . . . . . . . . . . . . . . . 14-8
Style 858 Reducing Coupling for Potable Water Applications. 11-5 No. A10S Stainless Steel Riser Anchor . . . . . . . . . . . . . . . . . 14-9
No. 350 90° Elbow. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-6 No. A40S Stainless Steel Riser Anchor for Tight Spaces. . . . 14-9
No. 351 45° Elbow. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-6 Schedule 10S Stainless Steel Fittings
No. 352 Tee. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-6 No. 410 SS 90° Elbow. . . . . . . . . . . . . . . . . . . . . . . . . . 14-10
No. 353 Reducing Tee Groove x Groove x Groove. . . . . . . . . 11-7 No. 411 SS 45° Elbow. . . . . . . . . . . . . . . . . . . . . . . . . . 14-10
No. 354 Reducing Tee Groove x Groove x Socket . . . . . . . . . 11-8 No. W410 90° Elbow. . . . . . . . . . . . . . . . . . . . . . . . . . . 14-10
No. 359F Flange Adapter. . . . . . . . . . . . . . . . . . . . . . . . . . . 11-8 No. W411 45° Elbow. . . . . . . . . . . . . . . . . . . . . . . . . . . 14-10
No. 361 Reducing Adapter. . . . . . . . . . . . . . . . . . . . . . . . . . 11-9 No. 412 SS 22Z\x° Elbow. . . . . . . . . . . . . . . . . . . . . . . . . 14-11
Style 355 PGS-300 Expansion Joint. . . . . . . . . . . . . . . . . . 11-10 No. 413 SS 11Z\v° Elbow. . . . . . . . . . . . . . . . . . . . . . . . . 14-11
Style 355P PGS-300 Expansion Joint for No. 420 SS Tee. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14-11
Potable Water Applications. . . . . . . . . . . . . . . . . . . . . . 11-13 No. W420 AGS Tee. . . . . . . . . . . . . . . . . . . . . . . . . . . . 14-12
CG1100 Cut Grooving Tool for CPVC/PVC Pipe . . . . . . . . . . 11-18 No. 425 SS Reducing Tee. . . . . . . . . . . . . . . . . . . . . . . 14-13
SECTION 12 – Copper Connection Products No. W425 Reducing Tee . . . . . . . . . . . . . . . . . . . . . . . . 14-14
Style 607 QuickVic™ Rigid Coupling for Copper Tubing. . . . . 12-2 No. 430 SS 45° Lateral, No. 433 SS True Y,
Style 644 Installation-Ready™ Transition Coupling for No. 435 SS Cross. . . . . . . . . . . . . . . . . . . . . . . . . . 14-15
Copper Tubing to Stainless Steel Pipe . . . . . . . . . . . . . . 12-2 No(s). 442 SS and 443 SS Adapter Nipples. . . . . . . . . . 14-16
Style 622 Mechanical-T Bolted Branch Outlet for No(s). W442, W443 and W449 AGS Adapter Nipples. . . 14-16
Copper Tubing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-3 No. 450 SS Concentric Reducer . . . . . . . . . . . . . . . . . . 14-17
Style 622 Mechanical-T Cross Assembly for Copper Tubing. 12-3 No. W450 AGS Concentric Reducer. . . . . . . . . . . . . . . . 14-18
Style 641 Vic-Flange Adapter for Copper Tubing. . . . . . . . . . 12-4 No. 451 SS Eccentric Reducer. . . . . . . . . . . . . . . . . . . .14-19
Grooved End Copper Fittings No. W451 AGS Eccentric Reducer. . . . . . . . . . . . . . . . . 14-20
No. 610 90° Elbow No. W445R AGS Flanged Adapter Nipple. . . . . . . . . . . 14-20
No. 611 45° Elbow. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-5 No. 460 SS Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14-21
No. 620 Tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-5 No. W460 AGS Cap. . . . . . . . . . . . . . . . . . . . . . . . . . . . 14-21
No. 660 Cap. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-5
No. 625 Reducing Tee Groove x Groove x Groove . . . . . . 12-5
VICTAULIC.COM PL2021-GEN XI
Table of Contents
Schedule 40S Stainless Steel Fittings No. 860S Cap. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15-9
No. 410H SS 90° Elbow. . . . . . . . . . . . . . . . . . . . . . . . . 14-22 No. 845FS – ANSI Class 150 Flat Face
No. 411H SS 45° Elbow. . . . . . . . . . . . . . . . . . . . . . . . . 14-22 Flange Adapter Nipple . . . . . . . . . . . . . . . . . . . . . . . 15-9
No. 412H SS 22Z\x° Elbow . . . . . . . . . . . . . . . . . . . . . . . 14-22 No. 845RS – ANSI Class 150 Raised Face
Flange Adapter Nipple . . . . . . . . . . . . . . . . . . . . . . . 15-9
No. 413H SS 11Z\v° Elbow. . . . . . . . . . . . . . . . . . . . . . . . 14-22
No. 846FS – ANSI Class 300 Flat Face
No. 420H SS Tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14-23 Flange Adapter Nipple . . . . . . . . . . . . . . . . . . . . . . . 15-9
No. 425H SS Reducing Tee. . . . . . . . . . . . . . . . . . . . . . 14-23 No. 846RS – ANSI Class 300 Raised Face
No. 430H SS 45° Lateral, No. 433H SS True Y, Flange Adapter Nipple . . . . . . . . . . . . . . . . . . . . . . . 15-9
No. 435H SS Cross . . . . . . . . . . . . . . . . . . . . . . . . 14-24 No. 826 Steam Outlet Fitting. . . . . . . . . . . . . . . . . . . . . 15-10
No. 440H SS Adapter Nipples. . . . . . . . . . . . . . . . . . . . 14-24 Nos. 891C, 891H, 892C and 892H Steam and
No(s). 442H SS and 443H SS Adapter Nipples. . . . . . . 14-25 Condensate In-Line Drip Leg Fittings . . . . . . . . . . . 15-11
No. 450H SS Concentric Reducer. . . . . . . . . . . . . . . . . 14-26 Nos. 893C, 893H, 894C and 894H Steam and
No. 451H SS Eccentric Reducer . . . . . . . . . . . . . . . . . . 14-26 Condensate Riser Drip Leg Fittings. . . . . . . . . . . . . 15-11
No. 460H SS Cap. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14-27 RG1200 Roll Grooving Tool. . . . . . . . . . . . . . . . . . . . . . . . . 15-12
Stainless Steel Valves RG1210 Roll Grooving Tool. . . . . . . . . . . . . . . . . . . . . . . . . 15-12
Series 461 Vic-300 MasterSeal™ OGS-200 Carbon Steel Grooving Rolls. . . . . . . . . . . . . . . . . 15-13
Stainless Steel Butterfly Valve. . . . . . . . . . . . . . . . . 14-28 OGS-200 Stainless Steel Grooving Rolls . . . . . . . . . . . . . . . 15-13
Series 861 Vic-300 MasterSeal™ Stainless Steel SECTION 16 - Large Diameter AGS Vic-Ring Products
Butterfly Valve for Potable Water Applications. . . . . 14-30 Vic-Ring Check Sheet for W07/W77/W89 AGS Couplings . . . 16-2
Series 726-S Ball Valve. . . . . . . . . . . . . . . . . . . . . . . . . 14-31 Style W07 AGS Rigid Coupling for AGS Vic-Ring System. . . . 16-4
Series 712-S Check Valve . . . . . . . . . . . . . . . . . . . . . . . 14-31 Style W77 AGS Flexible Coupling for AGS Vic-Ring System. . 16-5
Series 416 Stainless Steel Check Valve. . . . . . . . . . . . . . 14-32 SECTION 17 – Pipe Preparation Tools
Series 816 Stainless Steel Check Valve for Roll Grooving Tools – Field Portable
Potable Water Applications. . . . . . . . . . . . . . . . . . . 14-32
VE12. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17-2
SECTION 15 - Steam, Condensate and
Chemical System Products VE26 S/C/SS/P . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17-2
Style 870 Rigid Coupling. . . . . . . . . . . . . . . . . . . . . . . . . . . . 15-2 VE26/VE46 Power Drive Kit. . . . . . . . . . . . . . . . . . . . . . . 17-3
Series 871 Gate Valve. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15-2 VE46/P. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17-3
Series 871R Modular Gate Valve. . . . . . . . . . . . . . . . . . . . . . 15-2 RG1200 Roll Grooving Tool . . . . . . . . . . . . . . . . . . . . . . . 17-3
Series 159 Flexible Loop. . . . . . . . . . . . . . . . . . . . . . . . . . . . 15-3 RG1210 Roll Grooving Tool. . . . . . . . . . . . . . . . . . . . . . . .17-4
Carbon Steel OGS-200 Grooved End Fittings VE226 B/S/M/C/BSS/MSS/P . . . . . . . . . . . . . . . . . . . . . . 17-4
No. 890C and 890HC – Long Radius 90° Elbow. . . . . . . 15-3 VE226 Power Drive Kit. . . . . . . . . . . . . . . . . . . . . . . . . . . 17-5
No. 811C and 811HC – 45° Elbow. . . . . . . . . . . . . . . . . . 15-3 Roll Grooving Tools – Field Fabrication
No. 820C and No. 820HC Tee. . . . . . . . . . . . . . . . . . . . . 15-3 VE106. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17-6
No. 825C and No. 825HC Reducing Tee. . . . . . . . . . . . . 15-4 VE206. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17-7
No. 850C and No. 850HC Concentric Reducer. . . . . . . . 15-4 RG3212. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17-7
No. 851C and No. 851HC Eccentric Reducer. . . . . . . . . . 15-5 VE272SFS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17-8
No. 860C and No. 860HC Cap. . . . . . . . . . . . . . . . . . . . 15-5 VE270FSD. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17-9
No. 860T Carbon Steel Tapped Cap . . . . . . . . . . . . . . . . 15-5 VE416FS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17-10
No(s). 845FC and No. 846FS Flat Face ANSI Class 150 VE416FSD. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17-11
Flange Adapter Nipples . . . . . . . . . . . . . . . . . . . . . . 15-6 VE450FSD. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17-12
No(s). 845RC and 846RC Raised Face ANSI Class 300 Roll Grooving Tools – Shop Fabrication
Flange Adapter Nipples . . . . . . . . . . . . . . . . . . . . . . 15-6 VE268. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17-13
No. 843 Grooved Adapter Nipple. . . . . . . . . . . . . . . . . . . 15-6 VE414MC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17-14
No. 895i OGS-200 Groove x OGS-200 Groove x VE460. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17-15
NPT Thread Instrumentation Nipple. . . . . . . . . . . . . 15-7
50T 17-16
Stainless Steel OGS-200 Grooved End Fittings
50T Optional Accessories . . . . . . . . . . . . . . . . . . . . . . . 17-17
No. 890S – Long Radius 90° Elbow. . . . . . . . . . . . . . . . . 15-7
RG5200i. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17-17
No. 811S – 45° Elbow. . . . . . . . . . . . . . . . . . . . . . . . . . . 15-7
Victaulic Fabrication Cell . . . . . . . . . . . . . . . . . . . . . . . . 17-19
No. 820S Tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15-8
VAPS112 Pipe Stand. . . . . . . . . . . . . . . . . . . . . . . . . . . 17-20
No. 825S Reducing Tee. . . . . . . . . . . . . . . . . . . . . . . . . . 15-8
VAPS224 Pipe Stand. . . . . . . . . . . . . . . . . . . . . . . . . . . 17-20
No. 850S Concentric Reducer. . . . . . . . . . . . . . . . . . . . . 15-8
VAPS1672 Pipe Stand. . . . . . . . . . . . . . . . . . . . . . . . . . 17-21
No. 851S Eccentric Reducer. . . . . . . . . . . . . . . . . . . . . . 15-8
VE436MC Quick Change Slide Conversion Kit . . . . . . . . 17-21
For information pertaining to gasket seals for couplings, seals for Vic-Press™
products, O-rings for Victaulic® Bolted Split Sleeve products and general definition/
seal material Selection, refer to publication 05.01.
For specific chemical and temperature compatibility, refer to the
Gasket Chemical Services Guide Long Report (GSG-100).
Couplings and
Fittings
COUPLING
Coupling COUPLING COMPLETE † COMPLETE †
Approx. With Grade “EHP” or “T” With Grade
STYLE 107N PIPE Wgt. Ea. Gasket “O” Gasket SPARE PARTS
Refer to publication 06.23 inches Price Each Price Each Grade
Outside “EHP” or
Nom. Dia. “T” Grade “O”
Size lb Painted Galv. Painted Gasket Gasket
2 2.375 2.7 $115.50 $145.00 $628.00 $90.50 NR $552.50
2Z\x 2.875 3.0 131.00 164.50 706.50 98.00 NR 617.00
3 3.500 3.7 151.00 192.00 785.50 111.00 NR 687.00
4 4.500 5.1 209.50 270.00 1292.50 148.00 NR 1121.50
5 5.563 7.0 270.00 351.00 + 221.50 +
6 6.625 8.2 353.00 459.00 1755.00 246.50 NR 1518.00
2 – 8” 8 8.625 15.1 557.50 725.00 2112.00 296.50 NR 1718.50
10 10.750 23.6 1079.50 1439.00 3557.00 342.50 NR 2207.00
12 12.750 27.2 1205.50 1614.00 4972.50 380.50 3212.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
† Surcharge for couplings supplied without gasket. Contact Victaulic for pricing.
+ Quoted on application. Contact Victaulic for pricing and availability.
NR
Non-returnable
10 – 12”
Style 807N QuickVic™ Installation-Ready™ Rigid Coupling for Potable Water Applications
COUPLING
Rigid Coupling COUPLING COMPLETE †
Approx. COMPLETE † with Flush-Seal
STYLE 07 Wgt. With Grade “E” or Grade “E” or “T”
PIPE Ea. “T” Gasket Gasket SPARE PARTS
(with Style 77 gasket) inches Price Each Price Each Plated Bolt & Nut
Refer to publication 06.02 Nom. Outside Size §
Size Dia. lb Painted Galv. Painted Galv. No. * Inches
1 1.315 1.6 $105.00 $131.50 $148.00 $176.50 2 C\, x 2
1Z\v 1.660 1.6 98.00 123.50 139.00 165.00 2 C\, x 2
1Z\x 1.900 1.6 105.00 131.50 148.00 176.50 2 C\, x 2
2 2.375 2.3 134.00 166.50 175.50 208.50 2 Z\x x 2Z\x
2Z\x 2.875 2.6 151.50 191.50 209.50 245.00 2 Z\x x 2C\v
3 3.500 3.0 176.00 222.50 221.50 270.50 2 Z\x x 2Z\x
4 4.500 5.3 243.50 313.00 308.50 380.50 2 Z\x x 2C\v
5 5.563 7.4 313.00 408.50 487.50 856.50 2 B\, x 3Z\v
6 6.625 8.3 413.50 535.00 573.00 701.00 2 B\, x 3Z\v
8 8.625 15.1 649.00 843.50 757.50 947.50 2 C\v x 4Z\v
10 10.750 23.5 1260.00 1681.00 1514.00 1921.50 2 M\, x 6Z\x
12 12.750 28.2 1407.50 1883.50 1721.00 2213.00 2 M\, x 6Z\x
* Number of bolts equals number of segments supplied.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
† Surcharge for couplings supplied without gasket. Contact Victaulic for pricing.
§ Metric thread size bolts available. Contact Victaulic.
NOTE: See Spare Parts Section for spare part prices.
NOTE: For 14 - 24” Style 07 couplings contact your local Victaulic sales representative.
Zero-Flex™ STYLE 07 – SILICONE GRADE “L” GASKET OR FLUOROELASTOMER GRADE “O” GASKET
COUPLING COUPLING
Rigid Coupling COMPLETE † COMPLETE †
Approx. With Silicone With Fluoroelastomer
STYLE 07 PIPE Wgt. Ea. Grade “L” Gasket Grade “O” Gasket SPARE PARTS
inches Price Each Price Each Plated Bolt & Nut
(with Style 77 gasket) Nom. Outside Size §
Refer to publication 06.02 Size Dia. lb Painted Galv. Painted Galv. No. * Inches
1 1.315 1.6 $240.50 $266.00 $677.50 $704.50 2 C\, x 2
1Z\v 1.660 1.6 225.50 247.00 607.50 635.50 2 C\, x 2
1Z\x 1.900 1.6 320.50 344.50 678.00 705.50 2 C\, x 2
2 2.375 2.3 253.00 284.00 646.50 677.00 2 Z\x x 2Z\x
2Z\x 2.875 2.6 287.00 326.50 727.00 762.00 2 Z\x x 2C\v
3 3.500 3.0 323.00 369.00 810.50 858.50 2 Z\x x 2Z\x
4 4.500 5.3 479.00 546.50 1326.50 1392.50 2 Z\x x 2C\v
5 5.563 7.4 858.50 947.00 1445.00 1534.00 2 B\, x 3Z\v
6 6.625 8.3 1008.00 1121.00 1815.50 1929.50 2 B\, x 3Z\v
8 8.625 15.1 1260.00 1439.00 2204.00 2384.00 2 C\v x 4Z\v
10 10.750 23.5 2279.00 2699.00 3738.50 4157.00 2 M\, x 6Z\x
12 12.750 28.2 2615.50 3092.50 5174.00 5651.00 2 M\, x 6Z\x
* Number of bolts equals number of segments supplied.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
† Surcharge for couplings supplied without gasket. Contact Victaulic for pricing.
§ Metric thread size bolts available. Contact Victaulic.
NOTE: See Spare Parts Section for spare part prices.
NOTE: For 14 - 24” Style 07 couplings contact your local Victaulic sales representative.
Carbon Steel Rigid STYLE L07 – GRADE “E” OR “T” GASKET, TYPE 316 STAINLESS STEEL HARDWARE
Rigid Coupling AGS STYLE W07 – GRADE “E” OR “T” FLUSH-SEAL™ GASKET
COUPLING COMPLETE †
AGS STYLE W07 Approx. With Flush-Seal Grade “E”
PIPE Wgt. Ea. or “T” Gasket SPARE PARTS
Refer to publication 20.02
inches Price Each Plated Bolt & Nut
Nom. Outside Size §
Size Dia. lb Painted Galv. No. Inches
14 14.000 49.0 $1236.50 $1522.50 2 1 x 5Z\x
16 16.000 61.0 1320.00 1684.00 2 1 x 5Z\x
18 18.000 71.0 1524.00 1974.50 2 1 x 5Z\x
20 20.000 82.0 2082.50 2610.00 2 1Z\, x 5Z\x
22 22.000 110.0 2414.00 3213.00 2 1Z\, x 5Z\x
24 24.000 116.0 2669.50 3381.50 2 1Z\, x 5Z\x
26 26.000 205.0 4281.50 + 4 1C\, x 6
14 – 24”
28 28.000 220.0 5101.50 + 4 1C\, x 6
30 30.000 227.0 7149.00 + 4 1Z\v x 7
32 32.000 242.0 7810.00 + 4 1Z\v x 7
34 34.000 255.0 + + 4 1Z\v x 7
36 36.000 268.0 8423.00 + 4 1Z\v x 7
38 38.000 304.0 9679.50 12024.00 4 1Z\x x 7
40 40.000 340.0 10084.00 + 4 1Z\x x 8
42 42.000 360.0 11235.50 + 4 1Z\x x 8
44 44.000 390.0 + + 4 1Z\x x 8
46 46.000 415.0 + + 4 1Z\x x 8
26 – 50” 48 48.000 425.0 12421.00 + 4 1Z\x x 8
50 50.000 500.0 + + 4 1Z\x x 8
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
† Surcharge for couplings supplied without gasket. Contact Victaulic for pricing.
§ Metric thread size bolts available. Contact Victaulic.
NOTE: See Spare Parts Section for spare part prices.
Rigid Coupling AGS STYLE W07 – SILICONE GRADE “L” FLUSH-SEAL™ GASKET
COUPLING COMPLETE †
AGS STYLE W07 Approx. With Flush-Seal Silicone
PIPE Wgt. Ea. Grade “L” Gasket SPARE PARTS
Refer to publication 20.02
inches Price Each Plated Bolt & Nut
Nom. Outside Size §
Size Dia. lb Painted Galv. No. Inches
14 14.000 49.0 $2540.00 $2826.00 2 1 x 5Z\x
16 16.000 61.0 2795.00 3158.50 2 1 x 5Z\x
18 18.000 71.0 3074.00 3522.50 2 1 x 5Z\x
20 20.000 82.0 3562.00 4088.00 2 1Z\, x 5Z\x
22 22.000 110.0 + + 2 1Z\, x 5Z\x
24 24.000 116.0 3879.50 4590.50 2 1Z\, x 5Z\x
26 26.000 205.0 + + 4 1C\, x 6
14 – 24”
28 28.000 220.0 + + 4 1C\, x 6
30 30.000 227.0 + + 4 1Z\v x 7
32 32.000 242.0 + + 4 1Z\v x 7
34 34.000 255.0 + + 4 1Z\v x 7
36 36.000 268.0 + + 4 1Z\v x 7
38 38.000 304.0 + + 4 1Z\x x 7
40 40.000 340.0 + + 4 1Z\x x 8
42 42.000 360.0 + + 4 1Z\x x 8
44 44.000 390.0 + + 4 1Z\x x 8
46 46.000 415.0 + + 4 1Z\x x 8
26 – 50” 48 48.000 425.0 + + 4 1Z\x x 8
50 50.000 500.0 + + 4 1Z\x x 8
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
† Surcharge for couplings supplied without gasket. Contact Victaulic for pricing.
§ Metric thread size bolts available. Contact Victaulic.
NOTE: See Spare Parts Section for spare part prices.
Carbon Steel AGS STYLE LW07 – GRADE “E” OR “T” GASKET, TYPE 316 STAINLESS STEEL HARDWARE
COUPLING
Coupling for Steel COUPLING COMPLETE † COMPLETE †
Approx. With Grade “EHP” or “T” With Grade
STYLE 177N PIPE Wgt. Ea. Gasket “O” Gasket SPARE PARTS
Refer to publication 06.24 inches Price Each Price Each Grade
Nom. Outside “EHP” or Grade “O”
Size Dia. lb Painted Galv. Painted “T” Gasket Gasket
2 2.375 3.3 $116.00 $151.50 $562.50 $90.50 NR $552.50
2Z\x 2.875 3.8 134.50 186.50 634.50 98.00 NR 617.00
3 3.500 4.3 148.00 204.50 704.50 111.00 NR 687.00
4 4.500 7.4 213.50 299.50 1153.50 148.00 NR 1121.50
5 5.563 10.0 340.00 487.50 + 221.50 NR +
6 6.625 12.8 379.00 541.50 1602.00 246.50 NR 1518.00
8 8.625 20.7 650.50 965.50 2017.00 296.50 NR 1718.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
† Surcharge for couplings supplied without gasket. Contact Victaulic for pricing.
NOTE: Available with stainless steel bolts and nuts. Contact Victaulic for pricing.
+ Quoted on application. Contact Victaulic for pricing and availability.
NR
Non-returnable
Style 877N QuickVic™ Installation-Ready™ Flexible Coupling for Potable Water Applications
COUPLING
STYLE 77 COUPLING COMPLETE †
COMPLETE † With Flush-Seal
Refer to publication 06.04 Approx. With Grade “E” or Grade “E” or “T”
PIPE Wgt. Ea. “T” Gasket Gasket SPARE PARTS
inches Price Each Price Each Plated Bolt & Nut
Nom. Outside Size §
Size Dia. lb Painted Galv. Painted Galv. No.* Inches
C\v 1.050 1.1 $77.00 $102.00 $118.00 $145.00 2 C\, x 2
1 1.315 1.2 77.00 102.00 118.00 145.00 2 C\, x 2
1Z\v 1.660 2.0 99.50 131.50 145.00 178.00 2 Z\x x 2Z\x
1Z\x 1.900 2.1 108.00 140.00 151.00 186.50 2 Z\x x 2Z\x
C\v – 12” 2 2.375 2.6 116.00 151.50 157.50 196.50 2 Z\x x 2Z\x
2Z\x 2.875 3.1 134.50 186.50 191.50 243.00 2 Z\x x 2C\v
3 3.500 3.7 148.00 204.50 197.00 255.00 2 Z\x x 2C\v
3Z\x 4.000 5.6 211.50 296.00 283.50 372.00 2 B\, x 3Z\v
4 4.500 6.7 213.50 299.50 284.00 372.00 2 B\, x 3Z\v
5 5.563 10.6 320.50 459.00 493.50 640.00 2 C\v x 4Z\v
6 6.625 12.0 379.00 541.50 548.50 718.50 2 C\v x 4Z\v
8 8.625 20.8 613.50 910.50 738.00 1011.00 2 M\, x 5
10 10.750 27.8 998.00 1428.50 1183.00 1589.50 2 1 x 6
12 12.750 31.1 1134.00 1621.50 1389.50 1828.00 2 1 x 6Z\x
14 ‡ 14.000 39.2 1620.50 2234.50 1809.50 2397.00 2 1 x 3Z\x
16 ‡ 16.000 45.0 2124.00 2879.00 2383.50 3154.50 2 1 x 3Z\x
18 ‡ 18.000 64.1 2486.00 3442.00 2797.50 3776.00 2 1Z\, x 4
20 ‡ 20.000 74.8 3903.50 5252.50 4386.00 6105.50 2 1Z\, x 4
14 – 24” 22 ‡ 22.000 82.6 3904.00 5242.00 – – 2 1Z\, x 4
24 ‡ 24.000 89.6 4277.50 5743.50 4936.50 6438.50 2 1Z\, x 4
28 I.D.** 35.500 95.0 + + + + 4 1 x 5Z\x
30 I.D.** 37.880 127.2 + + + + 4 1 x 5Z\x
* Number of bolts equals number of segments supplied.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
NOTE: 14 – 24” for cut groove original groove systems only. For 14 – 72” roll groove systems Victaulic offers the
Style W77 coupling.
+ Quoted on application. Contact Victaulic for pricing and availability.
† Surcharge for couplings supplied without gasket. Contact Victaulic for pricing.
§ Metric thread size bolts available. Contact Victaulic.
NOTE: See Spare Parts Section for spare part prices.
** Requires Vic-Ring for assembly.
‡ For cut groove systems only. For roll groove systems please see AGS Style W77.
Standard Coupling STYLE 77 – SILICONE GRADE “L” GASKET OR FLUOROELASTOMER GRADE “O” GASKET
COUPLING COUPLING
STYLE 77 COMPLETE † COMPLETE †
Approx. With Silicone With Fluoroelastomer
Refer to publication 06.04 PIPE Wgt. Ea. Grade “L” Gasket Grade “O” Gasket SPARE PARTS
inches Price Each Price Each Plated Bolt & Nut
Nom. Outside Size §
Size Dia. lb Painted Galv. Painted Galv. No.* Inches
C\v 1.050 1.1 $208.00 $232.00 $634.50 $661.00 2 C\, x 2
1 1.315 1.2 208.00 232.00 634.50 661.00 2 C\, x 2
1Z\v 1.660 2.0 308.50 339.50 628.50 662.00 2 C\, x 2
1Z\x 1.900 2.1 324.50 356.00 669.50 701.50 2 Z\x x 2Z\x
2 2.375 2.6 226.50 262.00 562.50 598.50 2 Z\x x 2Z\x
2Z\x 2.875 3.1 262.00 312.00 634.50 687.00 2 Z\x x 2C\v
3 3.500 3.7 284.50 341.00 704.50 761.00 2 Z\x x 2C\v
3Z\x 4.000 5.6 + + 727.00 871.00 2 B\, x 3Z\v
4 4.500 6.7 426.00 511.00 1153.50 1236.50 2 B\, x 3Z\v
5 5.563 10.6 804.50 940.00 1305.50 1448.00 2 C\v x 4Z\v
6 6.625 12.0 908.50 1071.00 1602.00 1764.00 2 C\v x 4Z\v
8 8.625 20.8 1169.50 1462.00 1979.50 2273.50 2 M\, x 5
10 10.750 27.8 1738.50 2170.00 2802.50 3233.00 2 1 x 6
12 12.750 31.1 2015.50 2503.00 3877.00 4362.50 2 1 x 6Z\x
* Number of bolts equals number of segments supplied.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
† Surcharge for couplings supplied without gasket. Contact Victaulic for pricing.
§ Metric thread size bolts available. Contact Victaulic.
NOTE: See Spare Parts Section for spare part prices.
NOTE: 14 – 78” standard for this size range is the W77 AGS flexible coupling.
Carbon Steel Flexible STYLE L77 – GRADE “E” OR “T” GASKET, TYPE 316 STAINLESS STEEL HARDWARE
Flexible Coupling AGS STYLE W77 – GRADE “E” OR “T” FLUSH-SEAL™ GASKET
COUPLING COMPLETE †
AGS STYLE W77 Approx. With Flush-Seal
PIPE Wgt. Ea. Grade “E” or “T” Gasket SPARE PARTS
Refer to publication 20.03
inches Price Each Plated Bolt & Nut
Nom. Outside Size §
Size Dia. lb Painted Galv. No. Inches
14 14.000 48.0 $1043.50 $1442.50 2 1 x 5Z\x
16 16.000 58.0 1369.00 1857.50 2 1 x 5Z\x
18 18.000 65.0 1602.50 2221.00 2 1 x 5Z\x
20 20.000 82.0 2140.00 2869.00 2 1Z\, x 5Z\x
22 22.000 99.0 2488.50 3288.00 2 1Z\, x 5Z\x
24 24.000 107.0 2760.00 3705.50 2 1Z\, x 5Z\x
26 26.000 205.0 4318.50 + 4 1Z\, x 6
14 – 24”
28 28.000 220.0 5222.50 + 4 1Z\, x 6
30 30.000 227.0 7242.00 + 4 1Z\v x 7
32 32.000 242.0 7944.00 + 4 1Z\v x 7
34 34.000 255.0 + + 4 1Z\v x 7
36 36.000 268.0 8519.00 + 4 1Z\v x 7
38 38.000 340.0 9406.50 10817.00 4 1Z\x x 7
40 40.000 340.0 10186.50 + 4 1Z\x x 7
42 42.000 360.0 11291.00 + 4 1Z\x x 7
44 44.000 390.0 + + 4 1Z\x x 7
46 46.000 415.0 12024.00 + 4 1Z\x x 7
26 – 60” 48 48.000 425.0 12531.00 + 4 1Z\x x 7
54 54.000 648.0 + + 4 1Z\x x 7
56 56.000 676.0 + + 4 1Z\x x 7
60 60.000 720.0 + + 4 1Z\x x 7
62 62.000 956.0 + + 8 1Z\x x 7
72 72.000 1140.0 + + 8 1Z\x x 7Z\x
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
† Surcharge for couplings supplied without gasket. Contact Victaulic for pricing.
§ Metric thread size bolts available. Contact Victaulic.
NOTE: See Spare Parts Section for spare part prices.
NOTE: 14 – 78” standard for this size range is the W77 AGS flexible coupling.
62 – 78”
Flexible Coupling AGS STYLE W77 – SILICONE GRADE “L” FLUSH-SEAL™ GASKET
COUPLING COMPLETE †
AGS STYLE W77 Approx. With Flush-Seal Silicone
PIPE Wgt. Ea. Grade “L” Gasket SPARE PARTS
Refer to publication 20.03
inches Price Each Plated Bolt & Nut
Nom. Outside Size §
Size Dia. lb Painted Galv. No. Inches
14 14.000 48.0 $2570.00 $2968.50 2 1 x 5Z\x
16 16.000 58.0 2845.00 3331.00 2 1 x 5Z\x
18 18.000 65.0 3150.50 3661.50 2 1 x 5Z\x
20 20.000 82.0 3619.50 4348.50 2 1Z\, x 5Z\x
22 22.000 99.0 + + 2 1Z\, x 5Z\x
24 24.000 107.0 4044.50 4916.00 2 1Z\, x 5Z\x
26 26.000 205.0 + + 4 1Z\, x 6
14 – 24”
28 28.000 220.0 + + 4 1Z\, x 6
30 30.000 227.0 + + 4 1Z\v x 7
32 32.000 242.0 + + 4 1Z\v x 7
34 34.000 255.0 + + 4 1Z\v x 7
36 36.000 268.0 + + 4 1Z\v x 7
38 38.000 340.0 + + 4 1Z\x x 7
40 40.000 340.0 + + 4 1Z\x x 7
42 42.000 360.0 + + 4 1Z\x x 7
44 44.000 390.0 + + 4 1Z\x x 7
46 46.000 415.0 + + 4 1Z\x x 7
26 – 60” 48 48.000 425.0 + + 4 1Z\x x 7
54 54.000 648.0 + + 4 1Z\x x 7
56 56.000 676.0 + + 4 1Z\x x 7
60 60.000 720.0 + + 4 1Z\x x 7
62 62.000 956.0 + + 8 1Z\x x 7
72 72.000 1140.0 + + 8 1Z\x x 7Z\x
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
† Surcharge for couplings supplied without gasket. Contact Victaulic for pricing.
§ Metric thread size bolts available. Contact Victaulic.
NOTE: See Spare Parts Section for spare part prices.
62 – 78”
FLANGE
Adapters ADAPTER
COMPLETE †
STYLE W741 Approx. FLANGE ADAPTER COMPLETE † With Grade “L”
PIPE Wgt. Ea. With Grade “E” or “T” Gasket Gasket
Grooved Pipe Adapters to ANSI inches Price Each
Class 125 and 150 Flanges. Nom. Size Outside Dia. lb Painted Galv. Price Each
Refer to publication 20.04 14 14.000 70.0 $4048.50 $4980.50 $4336.50
16 16.000 88.0 4698.00 5823.00 5015.50
18 18.000 101.0 5782.00 7368.50 6201.00
20 20.000 115.0 6957.00 8900.50 7434.00
24 24.000 160.0 8900.50 11483.00 9413.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
† Surcharge for couplings supplied without gasket. Contact Victaulic for pricing.
The AGS Vic-Flange adapters utilize standard ANSI 125/150 flange bolts (supplied by installer). Bolt hole pattern is standard for
ANSI CL. 150 and 125 CL. flanges.
NOTE: See Spare Parts Section for spare part prices.
Vic-Flange Victaulic flange adapters require a smooth, hard surface at the mating flange face for
Adapter Notes effective sealing. Some applications, for which the Victaulic flange adapter is
otherwise well suited, do not provide an adequate mating surface. In such cases, it
is recommended that a metal flange washer be inserted between the Victaulic flange
adapter and the mating flange to provide the necessary sealing surface. See Spare
Parts Section for flange washer prices.
Typical applications where a Victaulic flange washer should be used are:
1.When mating to a serrated flange: a flange gasket should be used adjacent to the
serrated flange. The flange washer is then inserted between the Victaulic flange
adapter and the flange gasket.
2.When mating to a wafer valve: where typical valves are rubber lined and partially
rubber faced (smooth or not), the flange washer is placed between the valve and the
Victaulic flange adapter.
3.When mating to a rubber faced flange: the flange washer is placed between the
Victaulic flange adapters and the rubber faced flange.
4.When mating C.I. flanges to IPS flanges: the flange washer is placed between two
Victaulic flange adapters. If one flange is not a Victaulic flange adapter (e.g. a flanged
valve), then a flanged gasket must be placed adjacent to that flange and the flange
washer must be inserted between the flange gasket and the Victaulic flange adapter.
5.When mating to components (valves, strainers, etc.) where the component flange
face has an insert: follow the same arrangement as in # 1 above.
When ordering Victaulic flange washers, always specify the Vic-Flange Adapter style
number and size to assure the proper flange washer is supplied.
For additional notes regarding Vic-Flange Adapters, refer to publications 06.06, 06.32
and 20.04.
Actual Overall
Movement Joint Nominal Size Outside Dia. Settlement
1” 2” 3” 4”
STYLE W257
inches No. Pairs Price Each
Refer to publication 20.16
14 14.000 1 + + + +
2 + + + +
3 + + + +
4 + + + +
16 16.000 1 + + + +
2 + + + +
3 + + + +
4 + + + +
18 18.000 1 + + + +
2 + + + +
3 + + + +
4 + + + +
20 20.000 1 + + + +
2 + + + +
3 + + + +
4 + + + +
22 22.000 1 + + + +
2 + + + +
3 + + + +
4 + + + +
24 24.000 1 + + + +
2 + + + +
3 + + + +
4 + + + +
26 26.000 1 + + + +
2 + + + +
3 + + + +
4 + + + +
28 28.000 1 + + + +
2 + + + +
3 + + + +
4 + + + +
30 30.000 1 + + + +
2 + + + +
3 + + + +
4 + + + +
32 32.000 1 + + + +
2 + + + +
3 + + + +
4 + + + +
34 34.000 1 + + + +
2 + + + +
3 + + + +
4 + + + +
36 36.000 1 + + + +
2 + + + +
3 + + + +
4 + + + +
+ Quoted on application. Contact Victaulic for pricing and availability.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Actual Overall
Movement Joint Nominal Size Outside Dia. Settlement
1” 2” 3” 4”
STYLE W257
inches No. Pairs Price Each
Refer to publication 20.16
38 38.000 1 + + + +
2 + + + +
3 + + + +
4 + + + +
40 40.000 1 + + + +
2 + + + +
3 + + + +
4 + + + +
42 42.000 1 + + + +
2 + + + +
3 + + + +
4 + + + +
44 44.000 1 + + + +
2 + + + +
3 + + + +
4 + + + +
46 46.000 1 + + + +
2 + + + +
3 + + + +
4 + + + +
48 48.000 1 + + + +
2 + + + +
3 + + + +
4 + + + +
50 50.000 1 + + + +
2 + + + +
3 + + + +
4 + + + +
54 54.000 1 + + + +
2 + + + +
3 + + + +
4 + + + +
56 56.000 1 + + + +
2 + + + +
3 + + + +
4 + + + +
60 60.000 1 + + + +
2 + + + +
3 + + + +
4 + + + +
62 62.000 1 + + + +
2 + + + +
3 + + + +
4 + + + +
64 64.000 1 + + + +
2 + + + +
3 + + + +
4 + + + +
+ Quoted on application. Contact Victaulic for pricing and availability.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Actual Overall
Movement Joint Nominal Size Outside Dia. Settlement
1” 2” 3” 4”
STYLE W257
inches No. Pairs Price Each
Refer to publication 20.16
72 72.000 1 + + + +
2 + + + +
3 + + + +
4 + + + +
78 78.000 1 + + + +
2 + + + +
3 + + + +
4 + + + +
+ Quoted on application. Contact Victaulic for pricing and availability.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Outlet Coupling STYLE 72 – GRADE “E” OR “T” GASKET - FOR STYLE 72 GASKETS SEE BELOW.
SPARE
STYLE 72 Nominal Size OUTLET COUPLING COMPLETE † with Grade “E” or “T” Gasket PARTS
Refer to publication 06.10 NPT Female Thd. Branch Plated Bolt &
Approx. Price Each Nut
inches Wgt. Ea. Size §
Run x Branch lb Painted Galv. Inches
1Z\x x Z\x 1.4 $201.00 $236.50 C\, x 2
C\v 2.8 201.00 236.50 C\, x 2
1 2.8 201.00 236.50 C\, x 2
2 x Z\x 3.5 204.50 252.00 C\, x 2
C\v 2.5 204.50 252.00 C\, x 2
1 3.2 204.50 252.00 C\, x 2
2Z\x x Z\x 4.5 313.00 385.00 Z\x x 2C\v
C\v 4.6 313.00 385.00 Z\x x 2C\v
1 6.0 313.00 385.00 Z\x x 2C\v
1Z\v 5.0 352.00 447.50 B\, x 3Z\v
1Z\x 5.0 399.50 497.50 B\, x 3Z\v
3 x C\v 4.5 301.50 366.00 Z\x x 2C\v
1 8.9 399.50 497.50 B\, x 3Z\v
1Z\v 8.5 455.50 626.50 B\, x 3Z\v
1Z\x 8.5 455.50 626.50 B\, x 3Z\v
4 x C\v 6.3 441.00 548.50 Z\x x 2C\v
1 6.5 441.00 548.50 Z\x x 2C\v
1Z\x 11.6 624.00 796.00 B\, x 3Z\v
2 14.6 624.00 796.00 B\, x 3Z\v
6 x 1 19.3 881.00 1144.00 C\v x 4Z\v
1Z\x 19.3 881.00 1144.00 C\v x 4Z\v
2 19.5 881.00 1144.00 C\v x 4Z\v
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
† Surcharge for couplings supplied without gasket. Contact Victaulic for pricing.
§ Metric thread size bolts available. Contact Victaulic.
Style 72 Outlet Couplings supplied with painted or galvanized housing, Grade “E” or “T” gasket with plated neck insert and
plated bolts and nuts.
NOTE: See Spare Parts Section for spare part prices.
COUPLING
Coupling COMPLETE †
with Grade Grade “HMT”
STYLE 808 “HMT” Standard Standard
Refer to publication 15.01 Approx. or EndSeal or EndSeal
PIPE Wgt. Ea. Gasket Gasket Only Plated Bolt & Nut
inches Price Each Size §
Nom. Size Outside Dia. lb Painted Price Each No. Inches
6 6.625 36.0 $3173.50 $226.00 4 1 x 5
8 8.625 70.0 5983.00 351.00 4 1Z\, x 6
10 10.750 85.0 7248.00 469.00 4 1Z\, x 6
12 12.750 105.0 9721.50 + 4 1Z\v x 6
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
† Surcharge for couplings supplied without gasket. Contact Victaulic for pricing.
§ Metric thread size bolts available. Contact Victaulic.
NOTE: See Spare Parts Section for spare part prices.
Style 808 couplings for double grooved pipe require special pipe double groove dimensions. Contact Victaulic for
details.
+ Quoted on application. Contact Victaulic for pricing and availability.
COUPLING
Coupling for Ring COMPLETE †
Systems With Grade
“HMT”
Gasket and
STYLE 809N PIPE Rings Spare Parts
Refer to publication 15.03 Grade
Approx. “HMT” Ring
Wgt. Gasket Positioning
inches Ea. Price Each Only Rings Clamps SPARE PARTS
Nom. Outside Size §
Size Dia. lb Painted Price Each No. Inches
4 4.500 23.0 $667.50 $160.50 NR $37.00 $60.50 4 C\v x 4Z\v
6 6.625 50.0 1333.00 226.00 NR 40.00 60.50 NR 4 1 x 5
8 8.625 78.0 2368.50 304.50 NR 46.00 60.50 4 1Z\, x 6
10 10.750 109.0 2738.00 493.00 55.50 60.50 4 1Z\v x 6
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
† Surcharge for couplings supplied without gasket. Contact Victaulic for pricing.
§ Metric thread size bolts available. Contact Victaulic.
NOTE: Positioning clamps sold in set of 3 as recommended for installation.
NR
Non-returnable
COUPLING COMPLETE †
(Ductile Iron to IPS) PIPE Approx. With Grade “M” or “S”
inches Wgt. Ea. Flush-Seal Gasket SPARE PARTS
STYLE 307 Mating Pipe O.D. Price Each Price Each
Refer to publication 23.03 Grade
“M” or “S”
Flush-Seal
Nom. AWWA Gasket
Size IPS Steel Ductile lb Painted Galv. Only Bolt & Nut
3 3.500 3.960 6.0 $403.00 $540.50 $172.50 Z\x x 2C\v
4 4.500 4.800 8.0 462.50 634.50 179.00 Z\x x 3Z\v
6 6.625 6.900 9.0 561.50 761.50 194.00 B\, x 3Z\v
8 8.625 9.050 18.0 698.50 1035.50 215.00 C\v x 5
10 10.750 11.100 22.0 895.00 1316.00 373.50 M\, x 6Z\x
12 12.750 13.200 31.1 1188.00 1771.00 386.00 M\, x 6Z\x
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
† Surcharge for couplings supplied without gasket. Contact Victaulic for pricing.
NOTE: See Spare Parts Section for spare part prices.
COUPLING
Coupling COMPLETE †
PIPE With Grade “E2”
STYLE 171 inches Approx. Wgt. Ea. EPDM Gasket SPARE PARTS
Refer to publication 06.22 Nom. Outside
Size Dia. lb Price Each “E2” EPDM Gasket
1Z\x 1.900 0.8 + +
2 2.375 0.9 $71.50 +
2Z\x 2.875 1.0 89.00 +
3 3.500 1.6 + +
4 4.500 1.6 + +
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
† Surcharge for couplings supplied without gasket. Contact Victaulic for pricing.
+ Quoted on application. Contact Victaulic for pricing and availability.
Gaskets
AGS Gaskets GASKETS FOR ADVANCED GROOVE SYSTEM (AGS) COUPLING STYLES W07 AND W77
Grade “T” Type A FOR STYLES 07, 75, AND 77 COUPLINGS AND 741 FLANGE ADAPTERS
Style 750 Gaskets STANDARD “E” OR “T” GASKETS FOR STYLE 750
Flange Parts FOR STYLES 741, 841, W741, 743 & 441 VIC-FLANGE ADAPTERS
Flange Gaskets FOR STYLE 741, 841, W741, 743 & 441 VIC-FLANGE ADAPTERS
M-2 GASKETS
Installation-Ready™ NYLON COATED BOLTS AND NUTS FOR STYLES 107N, 177N AND 607 INSTALLATION-READY™ COUPLINGS STYLES 107N, 177N, 607,
807N AND 877N
Go/No-Go Tape
Pressure Gauge
Nom. Size 90° Elbow No. W10 45° Elbow No. W11
Refer to publication 20.05
Approx. Price Each Approx. Price Each
Wgt. Ea. Wgt. Ea.
inches lb Painted Galv. lb Painted Galv.
10 LIC
o.W AU
T
VIC
26 586.0 + + 278.0 + +
28 680.0 + + 325.0 + +
No. W11
30 887.0 + + 420.0 + +
32 1012.0 + + 483.0 + +
36 1283.0 + + 617.0 + +
40 1907.0 + + 915.0 + +
42 2169.0 + + 1042.0 + +
46 1527.0 (sw) + + 761.0 (sw) + +
48 1661.0 (sw) + + 828.0 (sw) + +
54 2094.0 (sw) + + 1042.0 (sw) + +
56 2252.0 (sw) + + 1120.0 (sw) + +
60 2583.0 (sw) + + 1285.0 (sw) + +
NOTE: AGS products must NOT be used on pipe that has been grooved using Original Groove System (OGS) roll sets.
(sw) Victaulic fittings are made of ductile iron, except those marked (sw) segmentally welded steel.
+ Quoted on application. Contact Victaulic for pricing and availability.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Nom. Size 22Z\x° Elbow No. W12 11Z\v° Elbow No. W13
Refer to publication 20.05
Approx. Price Each Approx. Price Each
Wgt. Ea. Wgt. Ea.
inches lb Painted Galv. lb Painted Galv.
14 46.0 $1646.50 $2180.00 32.0 $1490.00 $1869.00
No. W12 16 58.0 1974.50 2764.50 42.0 1834.50 2444.00
18 65.0 2390.50 3391.50 53.2 2220.50 3009.50
20 78.6 3001.00 4715.00 65.0 2717.50 3764.50
24 140.0 5119.50 5920.50 60.0 4741.50 4783.00
No. W13 26 122.0 + + 92.0 + +
28 136.0 + + 104.0 + +
30 151.0 + + 112.0 + +
32 167.0 + + 124.0 + +
36 194.0 + + 140.0 + +
40 322.0 + + 234.0 + +
42 348.0 + + 246.0 + +
46 392.0 + + 280.0 + +
48 420.0 + + 303.0 + +
54 592.0 + + 437.0 + +
56 627.0 + + 465.0 + +
60 698.0 + + 512.0 + +
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
NOTE: AGS products must NOT be used on pipe that has been grooved using Original Groove System (OGS) roll sets.
NOTE: For original roll grooved 14 – 24” fittings please contact your local Victaulic sales representative.
+ Quoted on application. Contact Victaulic for pricing and availability.
Long Radius – LONG RADIUS – 90° LONG RADIUS ELBOW OR 45° LONG RADIUS ELBOW
Nom. Size 90° Long Rad. Elbow No. 100 * 45° Long Rad. Elbow No. 110 *
1Z\x D Elbows Approx. Price Each Approx. Price Each
Refer to publication 07.01 Wgt. Ea. Wgt. Ea.
inches lb Painted Galv. lb Painted Galv.
2 2.5 $304.00 $398.50 1.8 $264.00 $333.50
2Z\x 3.4 380.50 435.50 2.8 838.00 942.50
3 6.0 304.00 398.50 4.9 264.00 333.50
4 12.3 450.50 602.00 7.3 320.50 425.00
5 18.0 2275.00 2608.00 14.8 (sw) 2114.00 2320.50
No. 100 6 30.4 1303.50 1711.00 17.4 935.00 1198.50
8 66.0 3112.00 3977.00 36.0 1625.00 2112.00
10 107.0 3577.50 4472.50 57.0 2193.00 2741.50
12 156.0 3937.00 4920.00 90.0 2962.00 3702.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
* See pages 1-66 – 1-68 for long radius 3-D, 5-D and 6-D bends.
No. 110
(sw) Victaulic fittings are made of ductile iron, except those marked (sw) segmentally welded steel.
Carbon Steel Long CARBON STEEL – 90° LONG RADIUS ELBOW NO. L100 OR 45° LONG RADIUS ELBOW NO. L110
Nom. Size 90° Long Radius Elbow No. L100 45° Long Radius Elbow No. L110
Radius Elbows Approx. Wgt. Price Each Approx. Wgt. Price Each
Ea. Ea.
SA352 Grade LCC inches lb Painted Galv. lb Painted Galv.
Refer to publication 51.01 1Z\x † 1.8 $228.00 $262.00 1.3 $228.00 $262.50
2† 3.6 297.00 341.50 2.1 297.00 341.50
2Z\x † 6.9 366.00 421.00 4.0 366.00 421.00
3† 8.2 417.00 501.50 5.8 417.00 501.50
4 12.0 530.00 609.50 7.7 530.00 609.50
6 31.0 1438.50 1655.00 18.0 1438.50 1655.00
8 65.0 3115.50 3583.00 49.0 3115.50 3583.00
10 * 130.0 + + 78.0 + +
12 * 192.0 + + 95.0 + +
No. L100 NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
Carbon steel wall thickness is standard weight unless otherwise noted.
Fittings are cast unless otherwise noted.
† Schedule 80 wall thickness. For other wall thickness options, contact Victaulic.
* ASTM A420 WPL6 wrought fitting with A333 Grade 6 tangents. Contact Victaulic for cast options.
No. L110
AGS Long Radius AGS LONG RADIUS – 90° LONG RADIUS ELBOW LW100 OR 45° LONG RADIUS ELBOW NO. LW110
Nom. Size 90° Long Rad. Elbow No. W100 45° Long Rad. Elbow No. W110
– 1Z\x D Elbows Approx. Price Each Approx. Price Each
Refer to publication 20.05 Wgt. Ea. Wgt. Ea.
inches lb Painted Galv. lb Painted Galv.
14 210.4 $3709.00 $4811.00 105.9 $2777.50 $3554.50
10 LIC
o.W AU
28 1019.0 + + 491.0 + +
W11
VICT
30 1268.0 + + 612.0 + +
No. W110 32 1517.0 + + 733.0 + +
36 1925.0 + + 935.0 + +
40 2883.0 + + 1397.0 + +
42 3260.0 + + 1583.0 + +
46 3260.0 (sw) + + 1210.0 (sw) + +
48 2471.0 (sw) + + 1314.0 (sw) + +
54 3120.0 (sw) + + 1648.0 (sw) + +
56 3355.0 (sw) + + 1769.0 (sw) + +
60 3850.0 (sw) + + 2023.0 (sw) + +
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
NOTE: AGS products must NOT be used on pipe that has been grooved using Original Groove System (OGS) roll sets.
(sw) Victaulic fittings are made of ductile iron, except those marked (sw) segmentally welded steel.
NOTE: For original roll grooved 14 – 24” fittings please contact your local Victaulic sales representative.
+ Quoted on application. Contact Victaulic for pricing and availability.
No. LW100 and LW110 Carbon Steel AGS Long Radius Elbow
Carbon Steel CARBON STEEL AGS LONG RADIUS – 90° LONG RADIUS ELBOW OR 45° LONG RADIUS ELBOW
Nom. Size 90° Long Radius Elbow No. LW100 45° Long Radius Elbow No. LW110
AGS Long Radius Approx. Wgt. Price Each Approx. Wgt. Price Each
Elbows Ea. Ea.
inches lb Painted Galv. lb Painted Galv.
SA352 Grade LCC 14 273.0 + + 144.0 + +
Refer to publication 51.01 16 366.0 + + 208.0 + +
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
Carbon steel wall thickness is standard weight unless otherwise noted.
Fittings are cast unless otherwise noted.
No. LW100
No. LW110
Reducing Base REDUCING BASE SUPPORT ELBOWS – GROOVED X GROOVED OR GROOVED X FLANGED
Nom. Size Grooved x Grooved No. R-10G Grooved x Flanged No. R-10F
Support Elbows Approx. Price Each Approx. Price Each
Refer to publication 07.01 inches Wgt. Each Wgt. Each
Inlet x Outlet lb Painted Galv. lb Painted Galv.
4 19.0 $2167.00 $2542.50 33.0 $2405.00 $2886.00
6 x
5 23.0 2452.50 + 38.0 2723.50 +
8 x 6 33.0 3291.00 3882.50 52.0 3656.00 +
10 x 8 61.0 4744.50 5651.50 88.0 5270.50 +
No. R-10G
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Grooved x Grooved
+ Quoted on application. Contact Victaulic for pricing and availability.
No. R-10F
Grooved x Flanged
Base Support Elbows BASE SUPPORT ELBOWS – GROOVED X FLANGED OR GROOVED X GROOVED
Nom. Size Grooved x Flanged No. 100F (Flat Face) Grooved x Grooved No. 100G
Refer to publication 07.13
Approx. Approx.
Wgt. Each Price Each Wgt. Each Price Each
inches lb Painted lb Painted
3 18.3 $972.50 8.4 $380.50
4 26.6 1352.50 12.8 563.50
6 43.5 2628.00 28.4 1629.50
8 73.5 5018.00 49.5 3890.00
10 127.2 6252.50 90.8 4472.50
12 197.1 7248.50 148.1 4921.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
No. 100G
Reducing Base REDUCING BASE SUPPORT ELBOWS – GROOVED X FLANGED OR GROOVED X GROOVED
Approx. Tee
Refer to publication 20.05 Nom. Size Wgt. Ea. No. W20
Price Each
VICTAULIC
No. LW20
Cross and Wye CROSS AND WYE – STEEL CROSS OR STEEL 90 TRUE WYE
AGS Cross and AGS CROSS AND WYE – STEEL CROSS OR STEEL 90 TRUE WYE
NOTE: AGS products must NOT be used on pipe that has been grooved using Original Groove System (OGS) roll sets.
o.W U
N TA
VIC
NOTE: For original roll grooved 14 – 24” fittings please contact your local Victaulic sales representative.
No. W33
Adapter Nipples ‡ ADAPTER NIPPLES – GROOVED X THREADED, GROOVED X BEVELED, OR GROOVED X GROOVED
Approx.
Same prices apply for: Nom. Size Length Wgt. Ea.
No. W42 inches inches * lb Price Each
AGS Grooved x Beveled 14 8 36.0 $864.00
No. W43 16 8 42.0 986.50
AGS Grooved x AGS Grooved 18 8 47.0 1345.50
No. W49
20 8 52.0 1513.50
AGS Grooved x Original
Grooved 24 8 63.0 1683.50
Refer to publication 20.05 26 12 104.0 +
28 12 112.0 +
30 12 120.0 +
32 12 128.0 +
No. W42 36 12 190.0 +
40 12 211.0 +
42 12 222.0 +
46 12 243.0 +
No. W43 48 12 254.0 +
NOTE: Items listed in shaded areas are special order, non-cancellable and non-returnable items.
+ Quoted on application. Contact Victaulic for pricing and availability.
Please specify nipple style number when ordering.
No. W49 Unless otherwise specified, Adapter Nipples are constructed using standard wall pipe.
* Other lengths available. Contact Victaulic for details.
NOTE: For original roll grooved 14 – 24” adapters please contact your local Victaulic sales representative.
Approx. No. 80
Adapter Nom. Size Wgt. Each Price Each
Refer to publication 07.01 inches lb Painted Galv.
C\v 1.0 $688.50 $761.50
1 1.0 737.50 791.00
1Z\v 1.5 (sw) 391.00 437.50
No. 80 1Z\x 1.5 (sw) 505.00 538.50
2 1.4 241.00 281.50
2Z\x 1.5 241.00 281.50
3 2.9 278.00 339.50
4 4.5 424.00 531.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Available with British Standard Pipe Threads (BSPT). Contact Victaulic for details.
(sw) Victaulic fittings are made of ductile iron, except those marked (sw) segmentally welded steel.
Adapter Elbows ADAPTER ELBOWS – 90° ADAPTER ELBOW OR 45° ADAPTER ELBOW
Nom. Size 90° Adapter Elbow No. 18 45° Adapter Elbow No. 19
Refer to publication 07.01
Approx. Price Each Approx. Price Each
Wgt. Ea. Wgt. Ea.
inches lb Painted Galv. lb Painted Galv.
C\v 0.5 $344.50 $366.00 0.5 $351.00 $372.00
1 0.5 232.00 286.50 0.6 – –
1Z\v 0.9 259.50 286.50 0.6 – –
No. 18 1Z\x 1.1 329.50 382.00 0.9 380.50 405.00
2 2.5 232.00 286.50 1.9 – –
2Z\x 3.0 400.50 437.50 2.3 391.00 403.00
3 5.8 372.00 454.50 5.0 664.00 713.00
6 17.6 1143.50 1445.00 12.7 1390.50 1545.00
No. 19 NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Available with British Standard Pipe Threads (BSPT). Contact Victaulic for details.
32 x 32 x 16 1183.0 + +
18 1209.0 + +
No. W25
20 1239.0 + +
22 1272.0 + +
24 1303.0 + +
26 1334.0 + +
28 1358.0 + +
30 1385.0 + +
36 x 36 x 18 1360.0 + +
20 1369.0 + +
22 1371.0 + +
24 1418.0 + +
26 1442.0 + +
28 1477.0 + +
30 1510.0 + +
32 1543.0 + +
38 x 38 x 18 1262.0 + +
20 1278.0 + +
22 1292.0 + +
24 1314.0 + +
26 1340.0 + +
28 1367.0 + +
30 1393.0 + +
32 1420.0 + +
36 1473.0 + +
40 x 40 x 20 1475.0 + +
22 1505.0 + +
24 1543.0 + +
26 1594.0 + +
28 1631.0 + +
30 1682.0 + +
32 1768.0 + +
36 1852.0 + +
38 1929.0 + +
42 x 42 x 20 1875.0 + +
22 1940.0 + +
24 2017.0 + +
26 2105.0 + +
28 2105.0 + +
30 2202.0 + +
32 2202.0 + +
36 2304.0 + +
38 1375.0 + +
40 1761.0 + +
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
NOTE: AGS products must NOT be used on pipe that has been grooved using Original Groove System (OGS) roll sets.
NOTE: For original roll grooved 14 – 24” fittings please contact your local Victaulic sales representative.
* Victaulic fittings listed are made of segmentally welded steel.
46 x 46 x 22 1843.0 + +
24 1865.0 + +
No. W25
26 1880.0 + +
28 1900.0 + +
30 1927.0 + +
32 1953.0 + +
36 2006.0 + +
38 2033.0 + +
40 2059.0 + +
42 2086.0 + +
48 x 48 x 24 2503.0 + +
26 2525.0 + +
28 2540.0 + +
30 2579.0 + +
32 2579.0 + +
36 2652.0 + +
38 2729.0 + +
40 2804.0 + +
42 2804.0 + +
46 2881.0 + +
54 x 54 x 26 2805.0 + +
28 2805.0 + +
30 2821.0 + +
32 2835.0 + +
36 2853.0 + +
38 2879.0 + +
40 2906.0 + +
42 2932.0 + +
46 2985.0 + +
48 3012.0 + +
56 x 56 x 28 3059.0 + +
30 3075.0 + +
32 3087.0 + +
36 3111.0 + +
38 3137.0 + +
40 3164.0 + +
42 3190.0 + +
46 3243.0 + +
48 3269.0 + +
54 3349.0 + +
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
NOTE: AGS products must NOT be used on pipe that has been grooved using Original Groove System (OGS) roll sets.
NOTE: For original roll grooved 14 – 24” fittings please contact your local Victaulic sales representative.
* Victaulic fittings listed are made of segmentally welded steel.
60 x 60 x 30 3269.0 + +
32 3380.0 + +
No. W25
36 3345.0 + +
38 3386.0 + +
40 3420.0 + +
42 3459.0 + +
46 3512.0 + +
48 3538.0 + +
54 3618.0 + +
56 3644.0 + +
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
NOTE: AGS products must NOT be used on pipe that has been grooved using Original Groove System (OGS) roll sets.
NOTE: For original roll grooved 14 – 24” fittings please contact your local Victaulic sales representative.
* Victaulic fittings listed are made of segmentally welded steel.
Size AGS Concentric Reducer No. W50 AGS Eccentric Reducer No. W51
Refer to publication 20.05
Approx. Price Each Approx. Price Each
Wgt. Ea. Wgt. Ea.
VICTAULIC
No.W50
inches lb Painted Galv. lb Painted Galv.
14 x 6 68.0 $6153.00 $6669.50 68.0 $7514.00 $8942.50
8 70.0 3488.00 3859.50 70.0 5690.50 6492.50
No. W50
10 * 72.0 3049.00 3401.50 72.0 5205.00 5692.00
12 * 74.0 3337.00 3763.00 74.0 5054.50 5529.00
16 x 8 88.0 4995.50 5447.50 88.0 8299.50 +
VICTAULIC
No.W51
Size AGS Concentric Reducer No. W50 AGS Eccentric Reducer No. W51
Refer to publication 20.05
Approx. Price Each Approx. Price Each
Wgt. Ea. Wgt. Ea.
VICTAULIC
No.W50
inches lb Painted Galv. lb Painted Galv.
30 x 14 192.0 + + 175.0 + +
16 197.0 + + 183.0 + +
No. W50
18 202.0 + + 191.0 + +
20 207.0 + + 199.0 + +
22 213.0 + + 207.0 + +
VICTAULIC
No.W51
24 218.0 + + 215.0 + +
No. W51 26 225.0 + + 223.0 + +
28 232.0 + + 232.0 + +
32 x 16 210.0 + + 191.0 + +
18 214.0 + + 199.0 + +
20 219.0 + + 207.0 + +
22 224.0 + + 215.0 + +
24 229.0 + + 223.0 + +
26 235.0 + + 232.0 + +
28 241.0 + + 240.0 + +
30 248.0 + + 248.0 + +
36 x 18 320.0 + + 282.0 + +
20 325.0 + + 292.0 + +
22 330.0 + + 303.0 + +
24 336.0 + + 314.0 + +
26 342.0 + + 324.0 + +
28 348.0 + + 335.0 + +
30 355.0 + + 346.0 + +
32 363.0 + + 356.0 + +
40 x 20 365.0 + + 316.0 + +
22 369.0 + + 326.0 + +
24 373.0 + + 337.0 + +
26 377.0 + + 346.0 + +
28 382.0 + + 357.0 + +
30 387.0 + + 367.0 + +
32 393.0 + + 378.0 + +
36 407.0 + + 399.0 + +
42 x 20 386.0 + + 327.0 + +
22 390.0 + + 337.0 + +
24 393.0 + + 348.0 + +
26 397.0 + + 359.0 + +
28 401.0 + + 369.0 + +
30 405.0 + + 378.0 + +
32 409.0 + + 389.0 + +
36 421.0 + + 410.0 + +
40 438.0 + + 432.0 + +
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
NOTE: AGS products must NOT be used on pipe that has been grooved using Original Groove System (OGS) roll sets.
* Single and double reduction concentric and eccentric reducers 14 - 24” are cast ductile iron and supplied with AGS roll
grooves, all others made of segmentally welded steel supplied with AGS roll grooves. Steel reducers with the same E to E
dimensions may be substituted to meet delivery requirements.
Size AGS Concentric Reducer No. W50 AGS Eccentric Reducer No. W51
Refer to publication 20.05
Approx. Price Each Approx. Price Each
Wgt. Ea. Wgt. Ea.
VICTAULIC
No.W50
inches lb Painted Galv. lb Painted Galv.
46 x 22 479.0 + + 419.0 + +
24 485.0 + + 431.0 + +
No. W50
26 490.0 + + 444.0 + +
28 496.0 + + 456.0 + +
30 502.0 + + 469.0 + +
VICTAULIC
No.W51
32 508.0 + + 481.0 + +
No. W51 36 523.0 + + 504.0 + +
38 531.0 + + 516.0 + +
40 540.0 + + 529.0 + +
42 550.0 + + 542.0 + +
48 x 24 507.0 + + 444.0 + +
26 513.0 + + 456.0 + +
28 518.0 + + 467.0 + +
30 523.0 + + 481.0 + +
32 529.0 + + 494.0 + +
36 541.0 + + 516.0 + +
38 548.0 + + 529.0 + +
40 557.0 + + 542.0 + +
42 565.0 + + 554.0 + +
46 586.0 + + 579.0 + +
54 x 28 1015.0 + + 974.0 + +
30 1035.0 + + 998.0 + +
32 1054.0 + + 1022.0 + +
36 1095.0 + + 1070.0 + +
38 1116.0 + + 1095.0 + +
40 1138.0 + + 1119.0 + +
42 1158.0 + + 1143.0 + +
46 1202.0 + + 1191.0 + +
48 1224.0 + + 1215.0 + +
56 x 28 1081.0 + + 1035.0 + +
30 1101.0 + + 1060.0 + +
32 1122.0 + + 1085.0 + +
36 1164.0 + + 1135.0 + +
38 1185.0 + + 1160.0 + +
40 1207.0 + + 1186.0 + +
42 1228.0 + + 1211.0 + +
46 1273.0 + + 1261.0 + +
48 1296.0 + + 1286.0 + +
54 1368.0 + + 1361.0 + +
60 x 30 1241.0 + + 1190.0 + +
32 1263.0 + + 1217.0 + +
36 1307.0 + + 1270.0 + +
38 1330.0 + + 1297.0 + +
40 1353.0 + + 1324.0 + +
42 1376.0 + + 1351.0 + +
46 1423.0 + + 1404.0 + +
48 1447.0 + + 1431.0 + +
54 1521.0 + + 1512.0 + +
56 1547.0 + + 1538.0 + +
NOTE: AGS products must NOT be used on pipe that has been grooved using Original Groove System (OGS) roll sets.
* Single and double reduction concentric and eccentric reducers 14 - 24” are cast ductile iron and supplied with AGS roll
grooves, all others made of segmentally welded steel supplied with AGS roll grooves. Steel reducers with the same E to E
dimensions may be substituted to meet delivery requirements.
No. LW51
Steel Steel
Refer to publication 07.01 Swaged Swaged
Nipples Nipples
No. 53, 54, No. 53, 54,
Approx. 55 Approx. 55
Nominal Size Wgt. Ea. Plated Nominal Size Wgt. Ea. Plated
No. 53 Grooved x Grooved
inches lb Price Each inches lb Price Each
2 x 1 2.0 $579.00 4 x 2Z\x 7.5 $1728.50
1Z\v 2.0 579.00 3 7.5 1728.50
1Z\x 2.0 579.00 3Z\x 7.5 2224.50
No. 54 Grooved x Threaded
2Z\x x 1 3.0 1243.00 5 x 2 11.5 2446.00
1Z\v 3.0 1243.00 3 11.5 2446.00
1Z\x 3.0 1243.00 4 11.5 2446.00
2 3.0 1105.00 6 x 1 17.0 4874.00
No. 55 Threaded x Grooved
3 x 1 4.5 1385.00 1Z\v 17.0 4874.00
1Z\v 4.5 1385.00 1Z\x 17.2 4874.00
1Z\x 4.5 1385.00 2 17.4 3987.50
2 4.5 1164.00 2Z\x 17.4 3987.50
2Z\x 4.6 1164.00 3 17.4 3987.50
3Z\x x 3 6.8 2657.50 4 17.5 2389.00
4 x 1 7.5 1967.50 5 17.5 2389.00
1Z\v 7.5 1967.50 8 x 6 20.0 4548.00
1Z\x 7.5 1509.00
2 7.5 1509.00
Nominal Approx.
Threaded Small End Size Wgt. Ea. Price Each
Refer to publication 07.01 inches
Inlet x Outlet lb Painted Galv.
1Z\x x 1 0.8 $164.50 $201.50
1Z\v 0.9 172.00 202.00
2 x C\v 0.9 164.50 201.50
No. 52
1 0.7 164.50 201.50
1Z\v 1.2 164.50 201.50
1Z\x 1.0 164.50 201.50
2Z\x x 1 1.1 221.50 254.00
1Z\v 1.2 232.00 284.50
1Z\x 1.3 243.00 284.50
2 1.4 164.50 201.50
3 x C\v 1.5 (sw) 1162.50 1236.50
1 1.3 178.50 215.00
1Z\x 1.5 201.50 241.00
2 1.5 201.50 241.00
2Z\x 2.4 243.00 284.50
4 x 1 2.3 229.50 277.50
1Z\x 2.7 533.00 696.50
2 2.6 244.00 291.50
2Z\x 2.6 245.00 300.00
3 2.5 299.50 352.50
5 x 4 4.5 1682.00 1829.50
6 x 1 5.5 462.50 566.50
2 5.7 462.50 566.50
2Z\x 5.8 462.50 566.50
3 5.8 462.50 566.50
4 6.5 (sw) 2760.50 3057.00
5 2.0 (sw) 4308.50 +
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
Available with British Standard Pipe Threads (BSPT). Contact Victaulic for details.
(sw) Victaulic fittings are made of ductile iron, except those marked (sw) segmentally welded steel.
Lateral LATERAL
Cap CAP
No. LW60
Electroplated
Refer to publication 07.01 Nom. Size Steel Bull Plug No. 61
Approx.
Wgt. Ea.
inches lb Price Each
No. 61 2 2.0 $405.50
2Z\x 3.0 405.50
3 4.5 593.50
4 7.5 762.00
5 12.0 1658.50
6 17.0 1787.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Other sizes available upon request. Contact Victaulic for details.
Length
Refer to publication 07.01 Nom. Size inches Steel Hose Nipple No. 48
Approx. Price Each
Wgt. Ea.
inches End to End lb Painted Galv.
No. 48 C\v 3.25 0.3 $267.00 $317.00
1 3.25 0.4 267.00 +
1Z\v 3.63 0.6 267.00 +
1Z\x 4.00 0.8 267.00 317.00
2 4.63 1.1 267.00 317.00
2Z\x 5.50 2.0 267.00 317.00
3 6.00 3.2 383.00 461.00
4 7.25 4.9 662.00 796.50
5 9.75 8.0 999.00 +
6 10.12 14.3 1185.00 +
8 12.50 24.7 2459.50 +
10 14.00 40.1 2416.00 +
12 16.00 62.0 + +
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
Flanged Adapter FLANGED ADAPTER NIPPLES – 125 LB, 150 LB, OR 300 LB *
150# Flanged Adapter Nipple No. L45R 300# Flanged Adapter Nipple No. L46R
Adapter Nipples Size x Length Raised Face Raised Face
Approx. Approx.
SA352 Grade LCC Wgt. Ea. Price Each Wgt. Ea. Price Each
Refer to publication 51.01 inches lb Painted Galv. lb Painted Galv.
1Z\x x 4 3.7 $519.50 $597.50 6.5 $583.00 $670.50
2 x 4 6.8 541.00 622.00 8.0 668.00 768.00
2Z\x x 4 10.1 662.50 762.50 – – –
3 x 4 11.7 768.50 884.50 15.8 874.50 1006.00
4 x 6 16.4 827.00 951.00 28.4 1109.00 1312.50
6 x 6 26.0 1272.00 1463.00 42.2 1696.00 1950.50
8 x 6 39.6 1647.50 1942.00 64.6 2576.00 3043.50
10 x 8 61.6 2692.50 3164.50 103.0 + +
12 x 8 85.8 4063.00 4753.50 133.0 + +
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
No. L45R
No. L46R
Approx.
Adapter Nipple Size x Length Wgt. Ea. AGS Flanged Adapter Nipple – No. W45R *
Refer to publication 20.05 Price Each
inches lb Painted Galv.
14 x 8 122.0 $3430.00 $4116.00
16 x 8 136.0 4157.00 4988.50
18 x 8 168.0 4946.00 5935.50
No. W45R 20 x 8 208.0 6377.50 7653.00
24 x 8 274.0 7267.00 8721.00
26 x 12 254.0 + +
28 x 12 262.0 + +
30 x 12 270.0 + +
32 x 12 278.0 + +
36 x 12 340.0 + +
40 x 12 361.0 + +
42 x 12 372.0 + +
46 x 12 393.0 + +
48 x 12 404.0 + +
54 x 16 372.0 + +
56 x 16 393.0 + +
60 x 16 404.0 + +
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
NOTE: AGS products must NOT be used on pipe that has been grooved using Original Groove System (OGS) roll sets.
* Raised face flanges are standard; flat flanges are quoted on application.
+ Quoted on application. Contact Victaulic for pricing and availability.
NOTE: For original roll grooved 14 – 24” fittings please contact your local Victaulic sales representative.
Carbon Steel NO. LW45R CARBON STEEL AGS FLANGED ADAPTER NIPPLE
Size x Length 150# Flanged Adapter Nipple No. LW45R Raised Face
AGS Flanged Approx.
Adapter Nipple Wgt. Ea. Price Each
inches lb Painted Galv.
SA352 Grade LCC 14 x 8 128.0 + +
Refer to publication 51.01 16 x 8 149.0 + +
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
No. LW45R
No. 36
3D Long Radius 3D LONG RADIUS BENDS – 90° BEND, 60° BEND, OR 45° BEND
5D Long Radius 5D LONG RADIUS BENDS – 90° BEND, 60° BEND, OR 45° BEND
6D Long Radius Steel 6D LONG RADIUS BENDS – 90° BEND, 60° BEND, OR 45° BEND
Schedule 80 3D SCHEDULE 80 3D LONG RADIUS CAST DUCTILE IRON ELBOWS – 90° ELBOW AND 45° ELBOW
No. 100-3D
90° Long Radius Elbow
No. 110-3D
45° Long Radius Elbow
SCHEDULE 80 3D LONG RADIUS CAST DUCTILE IRON ELBOWS – 22Z\x° ELBOW, 11Z\v° ELBOW, AND 6° ELBOW
1Z\x D 1Z\x D
1Z\xD Elbows Nom. Size XL100 90° Elbow XL110 45° Elbow
Approx. Approx.
STYLE XL100/XL110 Wgt. Ea. Wgt. Ea.
Refer to publication 07.07 inches lb Price Each lb Price Each
3 13.3 $204.50 9.0 $178.00
4 21.1 303.50 13.0 216.00
5 31.1 800.00 20.0 578.00
6 44.3 872.50 35.0 626.50
8 82.3 2081.50 46.0 1087.50
10 116.2 4182.50 63.0 3112.00
12 166.8 4368.00 90.0 3602.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
3D 3D
3D Elbows Nom. Size XL100 90° Elbow XL110 45° Elbow
Approx. Approx.
STYLE XL100/XL110 Wgt. Ea. Wgt. Ea.
Refer to publication 07.07 inches lb Price Each lb Price Each
3 25.0 $768.00 18.0 $749.00
4 31.0 1395.50 28.0 1327.50
5 64.6 1798.50 44.0 1730.50
6 96.0 2228.50 83.0 1765.00
8 145.0 2971.00 111.0 2421.50
10 301.0 4054.50 218.0 3735.50
12 435.0 6021.50 314.0 4605.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Couplings XL COUPLINGS
XL77 XL79
STYLE XL77/XL79 Fitting-to-Pipe Fitting-to-Fitting
Coupling Complete With Grade Coupling Complete With Grade SPARE
Refer to publication 07.07 Nom. Size “E” or “T” Gasket “E” or “T” Gasket PARTS
Plated Bolt
Approx. Approx. and Nut
Wgt. Ea. Wgt. Ea. Size
inches lb Price Each lb Price Each inches
3 5.2 $148.00 5.4 $148.00 Z\x x 2C\v
4 8.4 213.50 8.5 213.50 B\, x 3Z\v
5 12.2 320.50 12.3 320.50 C\v x 4Z\v
6 13.2 379.00 13.3 379.00 C\v x 4Z\v
8 23.8 613.50 24.6 613.50 M\, x 5
Style XL77 Coupling
10 35.1 998.00 35.9 998.00 1 x 6
12 40.6 1134.00 41.7 1134.00 1 x 6Z\x
NOTE: See the Spare Parts section for pricing and availability.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Approx.
STYLE DLY Nom. Size Wgt. Each
inches lb Price Each
Refer to publication 07.08
5 218.4 $11720.00
6 276.2 18287.00
* Victaulic Style DLY Delta-Y is shipped fully assembled.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
No. 30 DY Lateral
Lateral LATERAL
Lateral
Refer to publication 07.08 No. 30 DY
Aprx
Nom. Size Wgt. Ea.
inches lb Price Each
5 49.0 $1681.50
6 64.0 +
NOTE: No. 30 DY Lateral has a C to E dimension 5” longer than the standard No. 30 Lateral and is required for use on the Delta-Y
Assembly.
+ Quoted on application. Contact Victaulic for pricing and availability.
No. 30 DY NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Pipe
Refer to publication 07.03 inches 90° Elbow No. 62 45° Elbow No. 63 Tee No. 64
Price Each
Nominal Size Actual Size Painted Painted Painted
2 2.375 $579.50 $757.50 $964.50
2Z\x (sw) 2.875 802.00 757.50 1215.00
No. 62 3 (sw) 3.500 579.50 757.50 1305.00
4 (sw) 4.500 811.00 1003.50 1490.50
6 (sw) 6.625 2964.50 1613.00 3137.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
For sizes to 12”, contact Victaulic.
Steel Full Flow Elbows available with longer center to end dimensions. Contact Victaulic for details.
No. 63
(sw) Victaulic fittings are made of ductile iron, except those marked (sw) segmentally welded steel.
No. 64
Grooved x Threaded NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Equipment Modules
Vertical Connection
Pipe x Connection Configuration Horizontal Connection Configuration
1Z\v” – 18 1Z\v” – 18
C\v” Fem NPT UNEF Fem C\v” Fem NPT UNEF Fem
Approx. Thermometer Thermometer Approx. Thermometer Thermometer
Wgt Each * Connection Connection Wgt Each * Connection Connection
inches lb Part Code lb Part Code Price Each
3 x 2 53.3 KC43383PE0 – 60.9 KC43383PEE – $6089.00
2Z\x 55.2 KC49383PE0 – 62.8 KC49383PEE – 6279.50
3 50.8 KC59383PE0 – 57.8 KC59383PEE – 5922.00
4 x 2 77.2 KD29383PE0 KD29383PE9 89.4 KD29383PEE KD29383PE4 8752.00
2Z\x 80.4 KD35383PE0 KD35383PE9 91.4 KD35383PEE KD35383PE4 8936.00
3 81.4 KD44383PE0 KD44383PE9 92.4 KD44383PEE KD44383PE4 8989.50
4 76.8 KD65383PE0 KD65383PE9 81.4 KD65383PEE KD65383PE4 8697.50
5 x 2Z\x 115.0 KE05383PE0 KE05383PE9 131.8 KE05383PEE KE05383PE4 13712.00
3 116.7 KE09383PE0 KE09383PE9 133.5 KE09383PEE KE09383PE4 13523.50
4 117.6 KE16383PE0 KE16383PE9 134.5 KE16383PEE KE16383PE4 13831.00
5 109.7 KM83383PE0 KM83383PE9 124.3 KM83383PEE KM83383PE4 13268.50
6 x 2Z\x 191.9 KE65383PEO KE65383PE9 217.3 KE65383PEE KE65383PE4 16518.00
3 160.4 KE71383PE0 KE71383PE9 199.5 KE71383PEE KE71383PE4 16514.50
4 161.5 KE79383PE0 KE79383PE9 180.6 KE79383PER KE79383PE4 16838.00
5 162.6 KE90383PE0 KE90383PE9 185.6 KE90383PER KE90383PE4 17228.50
6 150.1 KE98383PE0 KE98383PE9 174.9 KE98383PEE KE98383PE4 16074.00
8 x 4 291.2 KF38383PE0 KF38383PE9 330.8 KF38383PEE KF38383PE4 28804.50
5 292.8 KF42383PE0 KF42383PE9 333.2 KF42383PEE KF42383PE4 28959.50
6 294.4 KF47383PE0 KF47383PE9 324.6 KF47383PER KF47383PE4 28869.50
8 278.7 KF57383PE0 KF57383PE9 314.5 KF57383PEE KF57383PE4 27635.50
10 x 6 530.9 KF91383PE0 KF91383PE9 616.8 KF91383PEE KF91383PE4 45816.00
8 539.6 KF96383PE0 KF96383PE9 588.4 KF96383PER KF96383PE4 44042.00
10 497.4 KG01383PE0 KG01383PE9 587.5 KG01383PEE KG01383PE4 43206.50
12 x 8 724.6 KG35383PE0 KG35383PE9 836.8 KG35383PEE KG35383PE4 74936.00
10 719.2 KG39383PE0 KG39383PE9 831.4 KG39383PEE KG39383PE4 75736.00
12 671.7 KG45383PE0 KG45383PE9 777.8 KG45383PEE KG45383PE4 70913.50
Vertical Connection
Pipe x Connection Configuration Horizontal Connection Configuration
1Z\v” – 18 1Z\v” – 18
C\v” Fem NPT UNEF Fem C\v” Fem NPT UNEF Fem
Approx. Thermometer Thermometer Approx. Thermometer Thermometer
Wgt Each * Connection Connection Wgt Each * Connection Connection
inches lb Part Code lb Part Code Price Each
4 x 4 76.8 KD65383PG0 KD65383PG9 81.4 KD65383PGE KD65383PG4 $8697.50
5 x 4 117.6 KE16383PG0 KE16383PG9 134.5 KE16383PGE KE16383PG4 13831.00
6 x 4 161.5 KE79383PG0 KE79383PG9 180.6 KE79383PGR KE79383PG4 16838.00
6 150.1 KE98383PG0 KE98383PG9 174.9 KE98383PGE KE98383PG4 16074.00
8 x 4 291.2 KF38383PG0 KF38383PG9 330.8 KF38383PGE KF38383PG4 28804.50
6 294.4 KF47383PG0 KF47383PG9 324.6 KF47383PGR KF47383PG4 28869.50
8 278.7 KF57383PG0 KF57383PG9 314.5 KF57383PGE KF57383PG4 27635.50
10 x 6 530.9 KF91383PG0 KF91383PG9 616.8 KF91383PGE KF91383PG4 45816.00
8 539.6 KF96383PG0 KF96383PG9 588.4 KF96383PGR KF96383PG4 44042.00
12 x 8 724.6 KG35383PG0 KG35383PG9 836.8 KG35383PGE KG35383PG4 74936.00
Outlet Fitting NO. 26 OUTLET FITTING – CARBON STEEL STANDARD WEIGHT PAINTED ORANGE
Inline Modular Dual SERIES 387 – INLINE MODULAR DUAL PUMP SKID
End Suction Modular SERIES 388 – END SUCTION MODULAR DUAL PUMP SKID
Rigid OGS Carbon RIGID OGS CARBON STEEL LONG RUN FITTINGS
Flexible OGS Carbon FLEXIBLE OGS CARBON STEEL LONG RUN FITTINGS
Vibration Isolation Air SERIES 385A – VIBRATION ISOLATION AIR HANDLING UNIT DROP – SUPPLY – SINGLE COIL
Vibration Isolation Air SERIES 385B – VIBRATION ISOLATION AIR HANDLING UNIT DROP – SUPPLY – DOUBLE COIL/DOUBLE STRAINER
Vibration Isolation Air SERIES 385C – VIBRATION ISOLATION AIR HANDLING UNIT DROP – SUPPLY – DOUBLE COIL/SINGLE STRAINER
Vibration Isolation Air SERIES 385D – VIBRATION ISOLATION AIR HANDLING UNIT DROP – RETURN – SINGLE COIL
Vibration Isolation Air SERIES 385E – VIBRATION ISOLATION AIR HANDLING UNIT DROP – RETURN – DOUBLE COIL/DOUBLE BALANCING VALVE
Vibration Isolation Air SERIES 385F – VIBRATION ISOLATION AIR HANDLING UNIT DROP – RETURN – DOUBLE COIL/SINGLE BALANCING VALVE
Low Profile Vibration SERIES 385G – LOW PROFILE VIBRATION ISOLATION AIR HANDLING UNIT DROP – SUPPLY – SINGLE COIL
Low Profile Vibration SERIES 385H – LOW PROFILE VIBRATION ISOLATION AIR HANDLING UNIT DROP – DOUBLE COIL/SINGLE STRAINER
Low Profile Vibration SERIES 385I – LOW PROFILE VIBRATION ISOLATION AIR HANDLING UNIT DROP – RETURN – SINGLE COIL
Low Profile Vibration SERIES 385J – LOW PROFILE VIBRATION ISOLATION AIR HANDLING UNIT DROP – DOUBLE COIL/SINGLE STRAINER
Pressure Reducing SERIES 386A SINGLE STAGE PRV STATION WITH LOW-FLOW BYPASS
Pressure Reducing SERIES 386C SINGLE STAGE PRV STATION WITH LOW-FLOW BYPASS AND “WATCHDOG” COMBINATION
Pressure Reducing SERIES 386E SINGLE STAGE PRV STATION WITH LOW-FLOW BYPASS, REDUNDANT BRANCH AND EXCESSIVE PRESSURE SHUT-
OFF VALVE
Single Branch SERIES 386A-SB SINGLE STAGE, SINGLE BRANCH PRV STATION WITH INTEGRAL LOW-FLOW BYPASS
Approx.
Pressure Reducing Nominal Size Weight Each
Valve (PRV) Station inches lb Victaulic Part Code Price Each
with Integral Low-Flow 1Z\x 57.1 K014386AES $12350.00
2 72.8 K020386AES 12652.00
Bypass 2Z\x 87.3 K024386AES 15007.00
3 125.4 K030386AES 17060.50
SERIES 386-SB
4 205.8 K040386AES 20774.00
Refer to publication 102.17
6 308.4 K060386AES 30677.50
SERIES 386B-SB TWO STAGE, SINGLE BRANCH PRV STATION WITH INTEGRAL LOW-FLOW BYPASS
Approx.
Nominal Size Weight Each
inches lb Victaulic Part Code Price Each
1Z\x 71.0 K014386BES $16728.00
2 95.3 K020386BES 18358.50
2Z\x 114.8 K024386BES 21257.00
3 198.7 K030386BES 21921.50
4 335.3 K040386BES 27175.00
6 548.7 K060386BES 43359.00
SERIES 386C-SB SINGLE STAGE, SINGLE BRANCH PRV STATION WITH INTEGRAL LOW-FLOW BYPASS & “WATCHDOG”
COMBINATION
Approx.
Nominal Size Weight Each
inches lb Victaulic Part Code Price Each
1Z\x 65.2 K014386CES $20804.50
2 82.9 K020386CES 21166.50
2Z\x 101.2 K024386CES 23884.00
3 146.1 K030386CES 26873.50
4 246.8 K040386CES 31825.00
6 442.6 K060386CES 48009.00
SERIES 386D-SB TWO STAGE, SINGLE BRANCH PRV STATION WITH INTEGRAL LOW-FLOW BYPASS & “WATCHDOG” COMBINATION
Approx.
Nominal Size Weight Each
inches lb Victaulic Part Code Price Each
1Z\x 86.7 K014386DES $25182.00
2 110.1 K020386DES 26873.50
2Z\x 131.8 K024386DES 30134.50
3 199.7 K030386DES 31704.50
4 336.4 K040386DES 41306.00
6 616.7 K060386DES 60690.50
Vertical Pressure SERIES 386A-V SINGLE STAGE VERTICAL PRV STATION WITH LOW-FLOW BYPASS
Hole Cut
Products
COMPLETE MECHANICAL-T
STYLES 920/920N Size Style Female Threaded Branch † Spare Parts
Refer to publication 11.02 Price Each Standard
Approx. Bolts & Nuts Grade “E”
inches Wgt. Ea. Size or “T”
Run x Brch. Number lb Painted Galv. inches Gaskets
2 x Z\x 920N 3.1 $126.00 $157.50 Z\x x 2C\v $28.00
C\v 920N 3.1 126.00 157.50 Z\x x 2C\v 28.00
1 920N 3.0 126.00 157.50 Z\x x 2C\v 28.00
1Z\v 920N 3.5 145.00 179.00 Z\x x 2C\v 32.50
1Z\x 920N 3.6 145.00 179.00 Z\x x 2C\v 32.50
2Z\x x Z\x 920N 3.0 126.00 157.50 Z\x x 2C\v 28.00
C\v 920N 3.0 126.00 157.50 Z\x x 2C\v 28.00
Style 920 Female 1 920N 2.9 126.00 157.50 Z\x x 2C\v 28.00
1Z\v 920N 3.5 176.00 213.50 Z\x x 3Z\v 32.50
1Z\x 920N 3.6 176.00 213.50 Z\x x 3 32.50
3 x Z\x 920N 3.4 145.00 176.00 Z\x x 2C\v 28.00
C\v 920N 3.4 145.00 176.00 Z\x x 2C\v 28.00
1 920N 3.3 145.00 176.00 Z\x x 2C\v 28.00
1Z\v § 920N 3.8 181.50 227.00 Z\x x 2C\v 32.50
1Z\x § 920N 4.1 181.50 227.00 Z\x x 2C\v 32.50
2§ 920N 4.9 209.50 259.50 Z\x x 3Z\v 32.50
4 x Z\x 920N 3.7 181.00 216.00 Z\x x 2C\v 28.00
C\v 920N 3.7 181.00 216.00 Z\x x 2C\v 28.00
1 920N 3.6 181.00 216.00 Z\x x 2C\v 28.00
1Z\v 920N 4.0 211.50 250.50 Z\x x 2C\v 32.50
1Z\x 920N 4.2 220.00 276.50 Z\x x 2C\v 32.50
2 920N 5.0 220.00 279.00 Z\x x 2C\v 32.50
2Z\x 920 5.8 229.50 296.50 1 x 2C\v 36.00
3 920 8.4 244.00 313.00 1 x 3Z\v 39.50
5 x 1Z\x 920 7.7 268.00 339.50 B\, x 4C\v 32.50
2 920 8.2 268.00 339.50 B\, x 4C\v 32.50
2Z\x 920 8.3 282.50 360.00 B\, x 4C\v 36.00
3 920 8.4 301.00 386.00 B\, x 4C\v 39.50
6 x 1Z\v 920N – – – Z\x x 2C\v 32.50
1Z\x 920N 5.1 275.00 351.00 Z\x x 2C\v 32.50
2 920N 5.6 275.00 351.00 Z\x x 2C\v 32.50
2Z\x 920 7.6 296.00 382.00 B\, x 4C\v 36.00
3 920 8.4 314.00 403.00 B\, x 4C\v 39.50
4 920 10.1 349.00 452.00 B\, x 4C\v 52.00
8 x 2 920 11.6 479.00 602.50 C\v x 4Z\v 37.50
2Z\x 920 11.6 479.00 602.50 C\v x 4Z\v 37.50
3 920 12.6 504.50 639.00 C\v x 4Z\v 39.50
4 920 15.3 519.50 669.50 C\v x 4Z\v 52.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Victaulic Hole Cutting Tool available, designed specifically for cutting holes to receive Mechanical-T outlet. See Pipe Preparation
Tool Section for information.
† Some size Mechanical-T outlets are available with British Standard Pipe Threads (BSPT) female threaded outlets. Contact
Victaulic for details.
§ Requires Z\x x 3Z\v” bolts when used in cross configuration.
Carbon Steel STYLE L920N – FEMALE THREADED BRANCH, TYPE 316 STAINLESS STEEL HARDWARE
COMPLETE MECHANICAL-T
STYLES 920/920N Size Style Grooved Branch Spare Parts
Refer to publication 11.02 Price Each Standard
Approx. Bolts & Nuts Grade “E”
inches Wgt. Ea. Size or “T”
Run x Branch Number lb Painted Galv. inches Gaskets
2 x 1 920N – – – – $28.00
1Z\v 920N 3.2 $145.00 $179.00 Z\x x 2C\v 32.50
1Z\x 920N 3.2 145.00 179.00 Z\x x 2C\v 32.50
2Z\x x 1 920N – – – – 28.00
1Z\v 920N 3.2 176.00 213.50 Z\x x 3Z\v 32.50
1Z\x 920N 3.3 176.00 213.50 Z\x x 3 32.50
3 x 1 920N – – – – 28.00
1Z\v § 920N 3.7 181.50 227.00 Z\x x 2C\v 32.50
1Z\x § 920N 3.8 181.50 227.00 Z\x x 2C\v 32.50
Style 920 Grooved 2§ 920N 4.6 209.50 259.50 Z\x x 3Z\v 32.50
3Z\x x 2 920N 3.8 806.00 1006.00 Z\x x 2C\v 32.50
4 x 1 920N 1.6 – – – 28.00
1Z\v 920N 3.6 211.50 250.50 Z\x x 2C\v 32.50
1Z\x 920N 3.9 220.00 276.50 Z\x x 2C\v 32.50
2 920N 4.6 220.00 279.00 Z\x x 2C\v 32.50
2Z\x 920 5.0 229.50 296.50 Z\x x 2C\v 36.00
3 920 6.4 244.00 313.00 Z\x x 3Z\v 39.50
5 x 1Z\x 920 7.6 268.00 339.50 B\, x 4C\v 32.50
2 920 8.0 268.00 339.50 B\, x 4C\v 32.50
2Z\x 920 7.9 282.50 360.00 B\, x 4C\v 36.00
3 920 8.8 301.00 386.00 B\, x 4C\v 39.50
6 x 1Z\v 920N 4.8 275.00 351.00 Z\x x 2C\v 32.50
1Z\x 920N 5.1 275.00 351.00 Z\x x 2C\v 32.50
2 920N 5.6 275.00 351.00 Z\x x 2C\v 32.50
2Z\x 920 7.6 301.00 382.00 B\, x 4C\v 36.00
3 920 8.4 314.00 403.00 B\, x 4C\v 39.50
4 920 10.1 349.00 452.00 B\, x 4C\v 52.00
8 x 2 920 11.6 479.00 602.50 C\v x 4Z\v 37.50
2Z\x 920 11.6 479.00 602.50 C\v x 4Z\v 37.50
3 920 11.6 504.50 639.00 C\v x 4Z\v 39.50
4 920 12.5 519.50 669.50 C\v x 4Z\v 52.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Victaulic Hole Cutting Tool available, designed specifically for cutting holes to receive Mechanical-T outlet. See Pipe Preparation
Tool Section for information.
§ Requires Z\x x 3Z\v” bolts when used in cross configuration.
Mechanical-T Cross The following combinations of Mechanical-T Crosses can be achieved with the use of two Mechanical-T
Upper Housings of the same run size and the same or different outlet size. Most sizes of Mechanical-T
STYLE 920/920N *
outlets are available with either grooved or female threaded outlets. Your choice must be specified on
each order.
Refer to publication 11.03
STYLES 920/920N – MECHANICAL-T CROSS
4 – 8”
Mechanical-T Spigot For information on Style 926 Mechanical-T Spigot, see Section 10 – HDPE Products
STYLE 926
Vic-Tap II * Parts A and B are designed for use with Style 931 Vic-Tap II Mechanical-T units; (Part C) for tapping into
systems under pressure up to 500 psi.
Part “A” Includes drill guide base with extended shaft, arbor, pilot drill, 2C\,” hole saw, packing gland and
HP-70 Rigid Coupling for connection to Vic-Tap II.
Part “B” Includes drill motor with ground fault interrupt and clip-on feed wheel assembly.
Part “C” Vic-Tap II with 2Z\x” full port ball valve factory mounted. Available in sizes 4 x 2Z\x”, 5 x 2Z\x”, 6 x
2Z\x”, and 8 x 2Z\x”. Available for purchase only (parts not sold separately).
* Parts A & B can be purchased separately.
Refer to Section 17 – Pipe Preparation Tools for prices and where to call for purchase information.
Valves
and Specialties
Ordering Information
Product, body material and disc/stem are standard as listed below. Please specify size, seat, and operator when ordering. Please see the next
page for numbering chart information.
For power actuation, contact Victaulic for your nearest authorized valve actuation center.
Refer to publication 08.20.
2” 2Z\x” 3” 4” 5” 6” 8” 10” 12”
Size (020) (024) (030) (040) (050) (060) (080) (100) (120)
Bare Valve (Ductile Iron Electroless Nickel
$823.00 $1072.00 $1131.50 $1403.00 $2706.00 $2832.50 $3771.00 $5331.00 $6044.50
Coated Disc)
PRICE OF VALVE COMPLETE WITH OPERATOR
DUCTILE IRON 10-POSITION OPERATOR
“E” or “T” Seat 10-Position Handle with
$1087.50 $1339.00 $1397.00 $1667.00 $2969.00 $3135.50 $4076.00 $6691.00 $7403.00
Memory Stop
10-Position Handle with Memory Stop “O” 1551.50 1798.00 1995.00 2225.00 4266.50 4370.50 5615.50 + +
10-Position - Tamper Proof with “E” or “T” Seat 1251.50 1502.50 1560.00 1833.50 3134.00 3300.00 4238.50 – –
STAINLESS STEEL TRIM 10-POSITION OPERATOR
“E” or “T” Seat 10-Position Handle with
$1884.00 $1967.00 $2121.00 $2546.00 $5126.00 $5480.00 $8116.50 $13554.50 $15558.00
Memory Stop
10-Position Handle with Memory Stop “O” 2311.50 2629.00 3440.00 3847.50 7196.00 7702.50 9062.00 + +
10-Position - Tamper Proof with “E” or “T” Seat 2252.00 2372.50 2421.50 2581.00 4677.50 5077.50 8415.50 – –
ALUMINUM BRONZE TRIM 10-POSITION OPERATOR
“E” or “T” Seat 10-Position Handle with
$1577.00 $1823.00 $2265.00 $2372.50 $4323.50 $5117.50 – – –
Memory Stop
10-Position Handle with Memory Stop “O” + + + + + + – – –
10-Position - Tamper Proof with “E” or “T” Seat + + + + + + – – –
V - 040 - 761 S E -0
Actual OD Size
Type in/mm Code Series Disc/Stem Seat Operator
V 2.375/60.3 020 761 S - Ductile Iron/416SS E - EPDM 0 - Bare
2.875/73.0 024 B - Aluminum Bronze/416SS T - Lubricated Nitrile 2 - 10-Position handle with memory stop
3.000/76.1 761 V - Thermal Barrier O - Fluoroelastomer 3 - Gear operator
3.500/88.9 030 X - CF8M/416SS 4 - Lever lock with tamper resistant
4.250/108.0 108 9 - Special 5 device (8"/200 mm)
4.500/114.3 040 5 - Gear operator with memory stop
5.250/133.0 133 6 - Gear operator with chain wheel
5.500/139.7 139 7 - Gear operator with memory stop and
5.563/141.3 050 chain wheel
6.250/159.0 159 8 - Gear operator with AWWA 2" square
6.500/165.1 165 oper. nut
6.625/168.3 060 S - Bare with ISO 5211 diagonal square
head drive
8.500/216.3 216
9 - Special 5
8.625/219.1 080
10.500/267.4 267
10.750/273.0 100
12.500/318.5 318
12.750/323.9 120
5
Details required with order.
AGS Series
300 psi Vic-300
Butterfly Valve AGS Series Vic-300
Bare Valve ‡
AGS Series Vic-300
With Gear Operator ‡
With Gear
Operator ‡
Size With “E” or “T” With “E” or “T” With “O”
SERIES W761
Approx. Approx.
Refer to publication 20.06 Weight Weight
Actual Size Each Price Each Each Price Each Price Each
inches Code lb 1182-00 lb 1182-20 1132-20
14 140 125.0 $7213.50 197.5 $8481.50 $9665.00
16 160 153.0 10115.50 265.0 11602.50 13768.50
18 180 199.0 12649.00 257.0 14279.00 17794.00
20 200 285.0 17379.00 477.0 19321.00 24077.00
24 240 451.0 22457.50 700.0 24604.00 32555.50
Approx.
Valve Weight
Size Each with Gear Operator
SERIES W709 Actual
Refer to publication 20.07 inches lb Price Each
26 859.8 +
28 1024.9 +
30 1300.4 +
32 1608.9 +
36 2159.9 +
40 3151.7 +
42 3438.2 +
46 4430.0 +
48 4749.6 +
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
Approx.
Valve Weight
Size Each Bare Valve
SERIES W719 Actual
Refer to publication 23.19 inches lb Price Each
14 406.0 +
16 470.0 +
18 661.0 +
20 780.0 +
24 1213.0 +
30 2059.0 +
36 3254.0 +
42 4899.0 +
48 5908.0 +
54 9076.0 +
60 11184.0 +
+ Quoted on application. Contact Victaulic for pricing and availability.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Series 706
Butterfly Valve Series 706 With Gear Series 706
Approx. Bare Valve ‡ Series 706 Approx. Operator ‡ With Gear
SERIES 706 Weight With “E” or Bare Valve ‡ Weight With “E” or Operator ‡
Refer to publication 08.17 Size Each “T” With “O” Each “T” With “O”
Actual Size
inches Code lb 3182-00 3132-00 lb 3182-20 3132-20
14 140 125.0 $18896.50 $22792.50 152.0 $19927.50 $23440.50
16 160 153.0 25383.50 31530.50 187.0 33129.50 36100.50
18 180 199.0 30582.50 35500.00 257.0 35438.50 39921.00
20 200 285.0 38543.00 46448.50 355.0 43643.00 51128.50
24 240 451.0 55374.50 62905.00 522.0 58409.50 67393.00
V - 180 - 1 5 8 2 - 20
V - 020 - 2 A A A - 1O
Grooved End Ball SERIES 726 – CARBON STEEL OR STAINLESS STEEL TRIM
Valve Complete
Valve Approx. With Handle & Valve
Nominal Size Weight Each Tamper Resistant Complete With
SERIES 726 inches lb Lock/Seal Option Gear Operator
Refer to publication 08.23 WITH CARBON STEEL CHROME PLATED TRIM
1000 psi 1166-15 1166-20
1Z\x 4.4 $476.00 $1261.50
2 6.5 528.00 1767.50
2Z\x 10.4 1149.00 2321.00
3 14.9 1854.50 3286.50
800 psi 8166-15 8166-20
4 41.5 $2868.00 $4186.50
1Z\x – 3” 6 78.5 8794.00 9871.50
WITH STAINLESS STEEL TRIM
1000 psi 1126-15 1126-20
1Z\x 4.8 $502.50 $1293.50
2 7.5 812.50 2601.00
2Z\x 11.6 2051.00 3277.50
3 17.2 2638.00 4182.00
800 psi 8126-15 8126-20
4 45.0 $3590.00 $5081.50
6 82.0 9664.00 11252.00
4 – 6”
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Series 726 valves are available with electric, pneumatic, and hydraulic actuators or chain wheels. Contact Victaulic for details.
When ordered separately, handles and locking device kits are non-cancellable and non-returnable.
NACE Compliant SERIES 727 – BARE VALVE WITH CARBON STEEL OR STAINLESS STEEL TRIM
Approx. Wgt.
Ball Valve Nominal Size Each Price Each
1500 psi Bare Valve with Bare Valve with
Bare Valve with Carbon Steel Bare Valve with Stainless Steel
SERIES 727 Carbon Steel Trim and Freeze Stainless Steel Trim and Freeze
inches lb Trim Port Option Trim Port Option
Refer to publication 08.42
Grooved x Grooved
2 7.2 $181.50 $213.00 $266.50 $313.00
3 16.8 410.00 480.00 536.00 628.00
4 36.3 761.00 892.00 805.00 943.00
6 86.5 2283.00 – 2470.00 –
Grooved x Threaded
3 17.6 $508.00 $578.00 $634.00 $726.00
4 37.4 895.50 1026.50 939.50 1077.50
SERIES 727 – LEVER HANDLE WITH CARBON STEEL OR STAINLESS STEEL TRIM
Bare Valve
Approx. Wgt.
Nominal Size Each Price Each
Lever Handle Lever Handle
with Carbon with Stainless
Lever Handle Steel Trim and Lever Handle Steel Trim and
with Carbon Freeze Port with Stainless Freeze Port
inches lb Steel Trim Option Steel Trim Option
Grooved x Grooved
2 8.4 $200.00 $231.50 $285.00 $331.50
3 18.0 431.50 501.50 557.50 649.50
4 37.5 782.50 913.50 826.50 964.50
With Lever
Handle 6 87.7 2326.00 – 2513.00 –
Grooved x Threaded
3 18.8 $529.50 $529.50 $655.00 $747.50
4 38.5 917.00 917.00 961.00 1099.00
Approx. Wgt.
SERIES 722 Nominal Size Each
inches lb Price Each
(Threaded) Z\v 0.2 $77.50
600 psi (WOG) Z\x 0.4 101.00
Refer to publication 08.15 C\v 0.7 102.00
1 1.0 135.00
1Z\v 1.5 213.50
1Z\x 2.1 263.50
2 2.4 350.00
UL Listed, FM Approved in Z\x” and larger sizes.
Approx.
LOW LEAD BALL VALVE Nominal Size Weight Each Victaulic
inches lb Part Code List Price
Refer to publication 08.73
Z\v 0.2 V002722L00 $92.50
C\, 0.3 V003722L00 92.50
Z\x 0.4 V004722L00 128.00
C\v 0.7 V006722L00 128.00
1 1.0 V010722L00 168.50
1Z\v 1.5 V012722L00 269.00
1Z\x 2.1 V014722L00 332.00
2 2.4 V020722L00 439.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Handle Extension OPTIONAL HANDLE EXTENSIONS FOR SERIES 722 AND SERIES 722L
High Pressure SERIES 713 – GRADE “E” OR “T” WITH DUCTILE IRON BODY
Approx.
Check Valve Nominal Size Weight Each Grade “E” or “T”
inches lb Price Each
SERIES 713 2 11.6 $494.50
2Z\x 18.0 814.00
2” – 1000 psi; 2Z\x – 4” – 750 psi
3 22.5 896.50
Refer to publication 08.54
4 38.0 1345.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
NOTE: Contact Victaulic for specialty coatings.
Approx.
Check Valve Nominal Size Weight Each Grade “E” or “T” Grade “O”
inches lb Price Each Price Each
SERIES 716H/716 2 10.7 $973.00 $1377.00
Refer to publication 08.08 2Z\x 3.6 1014.50 1417.50
3 4.5 1196.50 1509.50
4 16.0 1264.50 2121.00
5 20.0 2100.00 3040.00
6 28.0 2488.00 3446.00
8 40.0 3398.50 4065.50
10 100.0 9091.50 11957.00
12 140.0 10771.00 14359.00
2 – 3” Series 716H NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
For Series 716 sizes 4 –12” only – Drilling, tapping and plugs are available. Contact Victaulic for pricing and delivery.
Valves come standard untapped – optional two Z\x” NPT drain holes. One hole on each side of seat also available as an option.
C - 040 - 1 4 1 0 - 02
Approx.
Vic-Check Valve Nominal Size Weight Each Grade “E”
inches lb Price Each
AGS SERIES W715 14 140.0 $8479.50
Refer to publication 20.08 16 160.0 11557.00
18 180.0 15255.00
20 200.0 20052.50
24 240.0 25282.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
With Lever
SERIES 377 Nominal Size Operator With Gear Operator
Approx. Approx.
(AWWA Dimensions) Use with Wgt. Each Wgt. Each
Style 307 Transition coupling inches lb Price Each lb Price Each
for IPS pipe. 3 47.0 $2076.00 39.0 $3933.50
Refer to publication 08.12 4 54.0 2553.00 46.0 4081.00
6 89.0 3915.00 90.0 5498.50
8 (100 – 175 psi) – – 140.0 7447.50
10 – – 218.0 10665.00
12 – – 308.0 16265.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Available standard with EPDM (Grade “E”) or Nitrile (Grade “T”). Specify choice on order. Coated plug, welded nickel seat and
lever or gear operator complete with memory stop.
P - 080 - 2 1 1 1 - 81
Quantity Component
1 Series 365 Plug Valve
1 Series 317 AWWA Check Valve †
2 Style 307 Transition Coupling
1 Style 31 AWWA Coupling
* Kits are supplied unassembled.
† Arm and Spring Kit standard.
V 040 725 1 C 1
Groove x Groove
Groove x Flange
3” 4” 6” 8” 10” 12”
Size (030) (040) (060) (080) (100) (120)
PRICE OF VALVE COMPLETE WITH OPERATOR
VALVE WITH MANUAL ACTUATOR
Manual Actuator with Grade “E” or “T” Gasket $4869.50 $7791.00 $8829.50 $11036.50 $16230.00 $18826.50
VALVE WITH MANUAL ACTUATOR WITH STEM GUARD
Manual Actuator with Grade “E” or “T” Gasket + + + + + +
VALVE WITH PNEUMATIC ACTUATOR
Pneumatic Actuator with Grade “E” or “T” Gasket $6492.00 $8440.00 $11036.50 $12984.00 $20125.50 $22722.00
VALVE WITH PNEUMATIC ACTUATOR AND SOLENOID VALVE
Pneumatic Actuator with Weatherproof Enclosure
$7917.00 $9864.50 $12587.00 $14535.00 $21676.00 $24272.50
(Any Voltage) Grade “E” or “T” Gasket
Pneumatic Actuator with Hazardous Location Enclosure
8558.50 10505.50 13139.50 15086.50 22227.50 24824.50
(Any Voltage) Grade “E” or “T” Gasket
VALVE WITH PNEUMATIC ACTUATOR AND LIMIT SWITCHES
Pneumatic Actuator with Weatherproof Enclosure
$6870.00 $8817.50 $11414.50 $13361.50 $20502.00 $23098.50
(Any Voltage) Grade “E” or “T” Gasket
Pneumatic Actuator with Hazardous Location Enclosure
8501.00 10449.00 13045.50 15086.50 22133.50 24730.50
(Any Voltage) Grade “E” or “T” Gasket
VALVE WITH PNEUMATIC ACTUATOR, LIMIT SWITCHES, AND SOLENOID VALVE
Pneumatic Actuator with Weatherproof Enclosure
$8294.50 $10242.00 $12964.50 $14912.50 $22053.00 $24730.50
(Any Voltage) Grade “E” or “T” Gasket
Pneumatic Actuator with Hazardous Location Enclosure
10567.50 10567.50 15147.50 17095.00 24235.50 26832.50
(Any Voltage) Grade “E” or “T” Gasket
VALVE WITH PNEUMATIC ACTUATOR AND TRANSDUCER/POSITIONER
Pneumatic Actuator with Weatherproof Enclosure Linear $27774.50
$11083.00 $13030.00 $15659.50 $17751.50 $17751.50
Position Transducer Grade “E” or “T” Gasket
Pneumatic Actuator with Hazardous Location Enclosure
Transducer and Electro-pneumatic Positioner 15478.00 17365.50 19983.50 21930.50 29093.00 31690.00
Grade “E” or “T” Gasket
3” 4” 6” 8” 10” 12”
Size (030) (040) (060) (080) (100) (120)
PRICE OF VALVE COMPLETE WITH OPERATOR
VALVE WITH HYDRAULIC ACTUATOR
Hydraulic Actuator with Grade “E” or “T” Gasket $6492.00 $8440.00 $11036.50 $12984.00 $20125.50 $22722.00
VALVE WITH HYDRAULIC ACTUATOR AND TRANSDUCER
Hydraulic Actuator with Hydraulic Weatherproof Enclosure
$11083.00 $13030.50 $15660.00 $17751.50 $25149.50 $27774.50
Linear Position Transducer Grade “E” or “T” Gasket
VALVE WITH ELECTRIC ACTUATOR
Electric Actuator with Grade “E” or “T” Gasket + + + + + +
PNEUMATIC CYLINDER LIMIT SWITCHES (Price per set of 2)
Weatherproof Enclosure (Any Voltage) $378.00 $378.00 $378.00 $378.00 $378.00 $378.00
SEAT CARTRIDGE KIT
Includes Replacement Knife/Packing/Seat $2598.00 $3246.50 $3895.50 $5843.00 $8765.00 $11491.00
V - 120 - 795 - G - N - E - 1 - P - 1 - A - 1
NOTE: Electric actuation and other special actuation control options can be quoted upon request. Contact Victaulic for pricing and availability.
Approx.
Vic-Strainer Nominal Size Weight Each Price Each
Standard Fine Perforated
SERIES W732 inches lb Standard * Basket Only Basket Only †
Refer to publication 20.19 14 425.0 $39306.50 $16015.50 +
16 600.0 48851.50 19904.50 +
18 800.0 61495.00 25939.00 +
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
* Vic-Strainer Series W732 standard components include ductile iron body, access cap and coupling (with Grade “E” EPDM gas-
ket, plated bolts and nuts) and Type 304 stainless steel basket. Contact Victaulic for details.
Series W732 supplied with an NPT tap and plug to accommodate a drain or blow-down valve.
† Contact Victaulic for application and pricing information. Standard stainless steel baskets are offered for the following sizes:
0.156”/4 mm diameter for holes 14 – 18”/355,6 – 457,0 mm sizes.
Expansion Joint
STYLE 155
Refer to publication 09.05
Painted Couplings and Galvanized Couplings COUPLING COMPLETE with Grade COUPLING COMPLETE with Grade
Uncoated CS Pipe and Galvanized CS Approx. “E” or “T” Gasket and Carbon “E” or “T” Gasket and Stainless
Sections Pipe Sections Wgt. Ea. Steel Bolts & Nuts Steel Bolts & Nuts
Painted Galvanized Galvanized Painted Galvanized Galvanized
Couplings Couplings Couplings Couplings Couplings Couplings
and and or and and or
Total Total Uncoated Galvanized Galvanized Uncoated Galvanized Galvanized
Nominal Linear Neutral Linear Neutral CS Pipe CS Pipe CS Pipe CS Pipe CS Pipe CS Pipe
Size Movement Position Movement Position Sections Sections Sections Sections Sections Sections
inches lb Price Each Price Each
0.19 6.09 0.11 6.09 1.8 $2539.50 $3173.50 + + + +
0.38 8.43 0.23 8.43 3.2 2681.50 3350.50 + + + +
0.57 10.78 0.34 10.78 4.6 2822.50 3529.00 + + + +
0.76 13.12 0.46 13.12 6.0 2964.50 3706.50 + + + +
0.95 15.47 0.57 15.47 7.4 3106.50 3882.50 + + + +
1.14 17.81 0.68 17.81 8.8 3249.00 4060.50 + + + +
C\v
1.33 20.16 0.80 20.16 10.2 3390.50 4238.50 + + + +
1.52 22.50 0.91 22.50 11.6 3532.00 4414.50 + + + +
1.71 24.85 1.03 24.85 13.1 3574.00 4467.00 + + + +
1.90 27.19 1.14 27.19 14.5 3615.50 4519.00 + + + +
2.09 29.54 1.25 29.54 15.9 3656.00 4569.50 + + + +
2.28 31.88 1.37 31.88 17.3 3697.00 4621.50 + + + +
0.19 6.09 0.11 6.09 1.8 2947.00 3683.50 + + + +
0.38 8.43 0.23 8.43 3.2 3032.00 3789.00 + + + +
0.57 10.78 0.34 10.78 4.6 3130.00 3912.50 + + + +
0.76 13.12 0.46 13.12 6.0 3232.50 4040.00 + + + +
0.95 15.47 0.57 15.47 7.4 3336.00 4168.00 + + + +
1.14 17.81 0.68 17.81 8.8 3439.50 4298.50 + + + +
1
1.33 20.16 0.80 20.16 10.2 3543.00 4428.50 + + + +
1.52 22.50 0.91 22.50 11.6 3647.50 4559.00 + + + +
1.71 24.85 1.03 24.85 13.1 3751.50 4690.00 + + + +
1.90 27.19 1.14 27.19 14.5 3857.00 4821.00 + + + +
2.09 29.54 1.25 29.54 15.9 3961.50 4951.00 + + + +
2.28 31.88 1.37 31.88 17.3 4066.50 5082.50 + + + +
When using the hot dipped galvanized coating, the movement capacity of the Style 155 Expansion Join is reduced due to the
increased coating thickness. The following reduction factors shall be applied to the “total linear movement” values:
- For either hot dipped galvanized couplings or pipe sections, reduce “total linear movement” by 20%.
- For both hot dipped galvanized couplings and pipe sections, reduce “total linear movement” by 40%.
For more information regarding compressed or expanded lengths, refer to submittal 09.05.
+ Quoted on application. Contact Victaulic for pricing and availability.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Expansion Joint
STYLE 155
Refer to publication 09.05
Painted Couplings and Galvanized Couplings COUPLING COMPLETE with Grade COUPLING COMPLETE with Grade
Uncoated CS Pipe and Galvanized CS Approx. “E” or “T” Gasket and Carbon “E” or “T” Gasket and Stainless
Sections Pipe Sections Wgt. Ea. Steel Bolts & Nuts Steel Bolts & Nuts
Painted Galvanized Galvanized Painted Galvanized Galvanized
Couplings Couplings Couplings Couplings Couplings Couplings
and and or and and or
Total Total Uncoated Galvanized Galvanized Uncoated Galvanized Galvanized
Nominal Linear Neutral Linear Neutral CS Pipe CS Pipe CS Pipe CS Pipe CS Pipe CS Pipe
Size Movement Position Movement Position Sections Sections Sections Sections Sections Sections
inches lb Price Each Price Each
0.19 8.09 0.11 8.09 3.6 $3382.00 $4227.50 + + + +
0.38 10.43 0.23 10.43 6.1 3543.00 4428.50 + + + +
0.57 12.78 0.34 12.78 8.7 3704.50 4630.00 + + + +
0.76 15.12 0.46 15.12 11.2 3863.50 4830.00 + + + +
0.95 17.47 0.57 17.47 13.7 4025.00 5030.00 + + + +
1.14 19.81 0.68 19.81 16.2 4185.00 5232.50 + + + +
1Z\v
1.33 22.16 0.80 22.16 18.8 4346.00 5431.50 + + + +
1.52 24.50 0.91 24.50 21.3 4506.50 5631.50 + + + +
1.71 26.85 1.03 26.85 23.8 4667.50 5834.50 + + + +
1.90 29.19 1.14 29.19 26.3 4827.50 6034.50 + + + +
2.09 31.54 1.25 31.54 28.9 4988.00 6234.00 + + + +
2.28 33.88 1.37 33.88 31.4 5148.00 6435.00 + + + +
0.19 8.09 0.11 8.09 4.1 3402.00 4252.00 + + + +
0.38 10.43 0.23 10.43 6.9 3625.50 4530.50 + + + +
0.57 12.78 0.34 12.78 9.7 3848.50 4811.00 + + + +
0.76 15.12 0.46 15.12 12.5 4072.00 5090.50 + + + +
0.95 17.47 0.57 17.47 15.4 4296.50 5369.50 + + + +
1.14 19.81 0.68 19.81 18.2 4519.50 5649.00 + + + +
1Z\x
1.33 22.16 0.80 22.16 21.0 4743.00 5927.00 + + + +
1.52 24.50 0.91 24.50 23.8 4966.00 6208.50 + + + +
1.71 26.85 1.03 26.85 26.6 5190.50 6488.50 + + + +
1.90 29.19 1.14 29.19 29.4 5414.50 6767.00 + + + +
2.09 31.54 1.25 31.54 32.2 5637.50 7047.00 + + + +
2.28 33.88 1.37 33.88 35.0 5861.00 7326.50 + + + +
When using the hot dipped galvanized coating, the movement capacity of the Style 155 Expansion Join is reduced due to the
increased coating thickness. The following reduction factors shall be applied to the “total linear movement” values:
- For either hot dipped galvanized couplings or pipe sections, reduce “total linear movement” by 20%.
- For both hot dipped galvanized couplings and pipe sections, reduce “total linear movement” by 40%.
For more information regarding compressed or expanded lengths, refer to submittal 09.05.
+ Quoted on application. Contact Victaulic for pricing and availability.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Expansion Joint
STYLE 155
Refer to publication 09.05
Painted Couplings and Galvanized Couplings COUPLING COMPLETE with Grade COUPLING COMPLETE with Grade
Uncoated CS Pipe and Galvanized CS Approx. “E” or “T” Gasket and Carbon “E” or “T” Gasket and Stainless
Sections Pipe Sections Wgt. Ea. Steel Bolts & Nuts Steel Bolts & Nuts
Painted Galvanized Galvanized Painted Galvanized Galvanized
Couplings Couplings Couplings Couplings Couplings Couplings
and and or and and or
Total Total Uncoated Galvanized Galvanized Uncoated Galvanized Galvanized
Nominal Linear Neutral Linear Neutral CS Pipe CS Pipe CS Pipe CS Pipe CS Pipe CS Pipe
Size Movement Position Movement Position Sections Sections Sections Sections Sections Sections
inches lb Price Each Price Each
0.19 8.09 0.11 8.09 4.0 $3448.50 $4310.00 + + + +
0.38 10.43 0.23 10.43 6.3 3619.00 4525.00 + + + +
0.57 12.78 0.34 12.78 8.6 3789.00 4737.00 + + + +
0.76 15.12 0.46 15.12 10.9 3960.50 4949.50 + + + +
0.95 17.47 0.57 17.47 13.2 4130.50 5162.50 + + + +
1.14 19.81 0.68 19.81 15.5 4300.00 5376.00 + + + +
2
1.33 22.16 0.80 22.16 17.7 4471.00 5589.00 + + + +
1.52 24.50 0.91 24.50 20.0 4642.50 5802.00 + + + +
1.71 26.85 1.03 26.85 22.3 4813.50 6015.00 + + + +
1.90 29.19 1.14 29.19 24.6 4984.00 6229.00 + + + +
2.09 31.54 1.25 31.54 26.9 5153.00 6441.50 + + + +
2.28 33.88 1.37 33.88 29.2 5324.50 6655.00 + + + +
0.19 8.09 0.11 8.09 5.9 3532.00 4414.50 + + + +
0.38 10.43 0.23 10.43 8.9 3724.00 4654.50 + + + +
0.57 12.78 0.34 12.78 12.0 3915.50 4893.50 + + + +
0.76 15.12 0.46 15.12 15.1 4109.00 5133.50 + + + +
0.95 17.47 0.57 17.47 18.2 4298.50 5372.50 + + + +
1.14 19.81 0.68 19.81 21.3 4490.00 5613.00 + + + +
2Z\x
1.33 22.16 0.80 22.16 24.4 4682.50 5852.00 + + + +
1.52 24.50 0.91 24.50 27.5 4873.50 6092.00 + + + +
1.71 26.85 1.03 26.85 30.5 5064.50 6330.00 + + + +
1.90 29.19 1.14 29.19 33.6 5258.00 6570.50 + + + +
2.09 31.54 1.25 31.54 36.7 5447.50 6809.00 + + + +
2.28 33.88 1.37 33.88 39.8 5639.00 7049.00 + + + +
When using the hot dipped galvanized coating, the movement capacity of the Style 155 Expansion Join is reduced due to the
increased coating thickness. The following reduction factors shall be applied to the “total linear movement” values:
- For either hot dipped galvanized couplings or pipe sections, reduce “total linear movement” by 20%.
- For both hot dipped galvanized couplings and pipe sections, reduce “total linear movement” by 40%.
For more information regarding compressed or expanded lengths, refer to submittal 09.05.
+ Quoted on application. Contact Victaulic for pricing and availability.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Expansion Joint
STYLE 155
Refer to publication 09.05
Painted Couplings and Galvanized Couplings COUPLING COMPLETE with Grade COUPLING COMPLETE with Grade
Uncoated CS Pipe and Galvanized CS Approx. “E” or “T” Gasket and Carbon “E” or “T” Gasket and Stainless
Sections Pipe Sections Wgt. Ea. Steel Bolts & Nuts Steel Bolts & Nuts
Painted Galvanized Galvanized Painted Galvanized Galvanized
Couplings Couplings Couplings Couplings Couplings Couplings
and and or and and or
Total Total Uncoated Galvanized Galvanized Uncoated Galvanized Galvanized
Nominal Linear Neutral Linear Neutral CS Pipe CS Pipe CS Pipe CS Pipe CS Pipe CS Pipe
Size Movement Position Movement Position Sections Sections Sections Sections Sections Sections
inches lb Price Each Price Each
0.19 8.09 0.11 8.09 7.6 $3633.50 $4540.00 + + + +
0.38 10.43 0.23 10.43 11.5 3875.00 4843.00 + + + +
0.57 12.78 0.34 12.78 15.4 4117.00 5146.00 + + + +
0.76 15.12 0.46 15.12 19.3 4359.00 5448.00 + + + +
0.95 17.47 0.57 17.47 23.2 4600.50 5751.50 + + + +
1.14 19.81 0.68 19.81 27.2 4843.50 6054.00 + + + +
3
1.33 22.16 0.80 22.16 31.1 5085.00 6356.50 + + + +
1.52 24.50 0.91 24.50 35.0 5326.50 6657.50 + + + +
1.71 26.85 1.03 26.85 38.9 5569.50 6962.00 + + + +
1.90 29.19 1.14 29.19 42.8 5811.50 7265.00 + + + +
2.09 31.54 1.25 31.54 46.8 6053.50 7567.00 + + + +
2.28 33.88 1.37 33.88 50.7 6296.00 7871.50 + + + +
0.25 12.10 0.15 12.10 3.5 4101.50 5126.00 + + + +
0.50 14.60 0.30 14.60 7.0 4387.00 5482.50 + + + +
0.75 17.11 0.45 17.11 10.5 4671.50 5840.00 + + + +
1.00 19.61 0.60 19.61 14.0 4956.50 6196.00 + + + +
1.25 22.12 0.75 22.12 17.5 5242.00 6551.50 + + + +
1.50 24.62 0.90 24.62 21.0 5527.00 6909.00 + + + +
4
1.75 27.13 1.05 27.13 24.5 5811.00 7264.50 + + + +
2.00 29.63 1.20 29.63 28.0 6096.50 7618.50 + + + +
2.25 32.14 1.35 32.14 31.5 6381.50 7975.50 + + + +
2.50 34.64 1.50 34.64 35.0 6665.50 8332.50 + + + +
2.75 37.15 1.65 37.15 38.5 6950.50 8689.50 + + + +
3.00 39.65 1.80 39.65 42.0 7236.50 9043.50 + + + +
When using the hot dipped galvanized coating, the movement capacity of the Style 155 Expansion Join is reduced due to the
increased coating thickness. The following reduction factors shall be applied to the “total linear movement” values:
- For either hot dipped galvanized couplings or pipe sections, reduce “total linear movement” by 20%.
- For both hot dipped galvanized couplings and pipe sections, reduce “total linear movement” by 40%.
For more information regarding compressed or expanded lengths, refer to submittal 09.05.
+ Quoted on application. Contact Victaulic for pricing and availability.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Expansion Joint
STYLE 155
Refer to publication 09.05
Painted Couplings and Galvanized Couplings COUPLING COMPLETE with Grade COUPLING COMPLETE with Grade
Uncoated CS Pipe and Galvanized CS Approx. “E” or “T” Gasket and Carbon “E” or “T” Gasket and Stainless
Sections Pipe Sections Wgt. Ea. Steel Bolts & Nuts Steel Bolts & Nuts
Painted Galvanized Galvanized Painted Galvanized Galvanized
Couplings Couplings Couplings Couplings Couplings Couplings
and and or and and or
Total Total Uncoated Galvanized Galvanized Uncoated Galvanized Galvanized
Nominal Linear Neutral Linear Neutral CS Pipe CS Pipe CS Pipe CS Pipe CS Pipe CS Pipe
Size Movement Position Movement Position Sections Sections Sections Sections Sections Sections
inches lb Price Each Price Each
0.25 12.10 0.15 12.10 5.5 $4672.00 $5840.50 + + + +
0.50 14.60 0.30 14.60 11.0 5029.50 6286.50 + + + +
0.75 17.11 0.45 17.11 16.5 5387.00 6734.00 + + + +
1.00 19.61 0.60 19.61 22.0 5745.00 7181.50 + + + +
1.25 22.12 0.75 22.12 27.5 6102.50 7627.50 + + + +
1.50 24.62 0.90 24.62 33.0 6460.50 8075.50 + + + +
5
1.75 27.13 1.05 27.13 38.5 6818.00 8524.00 + + + +
2.00 29.63 1.20 29.63 44.0 7175.50 8970.50 + + + +
2.25 32.14 1.35 32.14 49.5 7533.00 9417.00 + + + +
2.50 34.64 1.50 34.64 55.0 7892.50 9865.00 + + + +
2.75 37.15 1.65 37.15 60.5 8249.50 10311.50 + + + +
3.00 39.65 1.80 39.65 66.0 8608.00 10760.00 + + + +
0.25 12.10 0.15 12.10 6.7 5608.50 7010.50 + + + +
0.50 14.60 0.30 14.60 13.4 6020.00 7523.00 + + + +
0.75 17.11 0.45 17.11 20.1 6427.50 8034.00 + + + +
1.00 19.61 0.60 19.61 26.8 6837.00 8545.50 + + + +
1.25 22.12 0.75 22.12 33.5 7247.00 9058.50 + + + +
1.50 24.62 0.90 24.62 40.2 7656.00 9570.50 + + + +
6
1.75 27.13 1.05 27.13 46.9 8067.00 10081.50 + + + +
2.00 29.63 1.20 29.63 53.6 8475.00 10593.50 + + + +
2.25 32.14 1.35 32.14 60.3 8884.00 11105.50 + + + +
2.50 34.64 1.50 34.64 67.0 9294.50 11616.50 + + + +
2.75 37.15 1.65 37.15 73.7 9703.00 12127.50 + + + +
3.00 39.65 1.80 39.65 80.4 10112.00 12641.50 + + + +
When using the hot dipped galvanized coating, the movement capacity of the Style 155 Expansion Join is reduced due to the
increased coating thickness. The following reduction factors shall be applied to the “total linear movement” values:
- For either hot dipped galvanized couplings or pipe sections, reduce “total linear movement” by 20%.
- For both hot dipped galvanized couplings and pipe sections, reduce “total linear movement” by 40%.
For more information regarding compressed or expanded lengths, refer to submittal 09.05.
+ Quoted on application. Contact Victaulic for pricing and availability.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Expansion Joint
STYLE 155
Refer to publication 09.05
Painted Couplings and Galvanized Couplings COUPLING COMPLETE with Grade COUPLING COMPLETE with Grade
Uncoated CS Pipe and Galvanized CS Approx. “E” or “T” Gasket and Carbon “E” or “T” Gasket and Stainless
Sections Pipe Sections Wgt. Ea. Steel Bolts & Nuts Steel Bolts & Nuts
Painted Galvanized Galvanized Painted Galvanized Galvanized
Couplings Couplings Couplings Couplings Couplings Couplings
and and or and and or
Total Total Uncoated Galvanized Galvanized Uncoated Galvanized Galvanized
Nominal Linear Neutral Linear Neutral CS Pipe CS Pipe CS Pipe CS Pipe CS Pipe CS Pipe
Size Movement Position Movement Position Sections Sections Sections Sections Sections Sections
inches lb Price Each Price Each
0.25 12.13 0.15 12.13 12.5 $6814.00 $8517.00 + + + +
0.50 15.00 0.30 15.00 25.0 7446.00 9307.50 + + + +
0.75 17.88 0.45 17.88 37.5 8080.00 10098.00 + + + +
1.00 20.75 0.60 20.75 50.0 8711.00 10889.50 + + + +
1.25 23.63 0.75 23.63 62.5 9342.50 11679.00 + + + +
1.50 26.50 0.90 26.50 75.0 9976.00 12468.50 + + + +
8
1.75 29.38 1.05 29.38 87.5 10607.50 13261.00 + + + +
2.00 32.25 1.20 32.25 100.0 11239.00 14050.00 + + + +
2.25 35.13 1.35 35.13 112.5 11871.00 14839.50 + + + +
2.50 38.00 1.50 38.00 125.0 12504.50 15630.00 + + + +
2.75 40.88 1.65 40.88 137.5 13138.00 16421.00 + + + +
3.00 43.75 1.80 43.75 150.0 13768.00 17210.00 + + + +
0.25 16.13 0.15 16.13 82.3 7958.00 9946.00 + + + +
0.50 19.00 0.30 19.00 119.9 8990.00 11238.00 + + + +
0.75 21.88 0.45 21.88 157.4 10022.00 12529.50 + + + +
1.00 24.75 0.60 24.75 195.0 11055.50 13819.50 + + + +
1.25 27.63 0.75 27.63 232.6 12088.00 15110.50 + + + +
1.50 30.50 0.90 30.50 270.2 13122.00 16401.00 + + + +
10
1.75 33.38 1.05 33.38 307.8 14153.50 17693.00 + + + +
2.00 36.25 1.20 36.25 345.3 15186.50 18983.50 + + + +
2.25 39.13 1.35 39.13 382.9 16220.00 20274.50 + + + +
2.50 42.00 1.50 42.00 420.5 17252.50 21565.00 + + + +
2.75 44.88 1.65 44.88 458.1 18285.00 22855.00 + + + +
3.00 47.75 1.80 47.75 495.7 19317.00 24145.00 + + + +
When using the hot dipped galvanized coating, the movement capacity of the Style 155 Expansion Join is reduced due to the
increased coating thickness. The following reduction factors shall be applied to the “total linear movement” values:
- For either hot dipped galvanized couplings or pipe sections, reduce “total linear movement” by 20%.
- For both hot dipped galvanized couplings and pipe sections, reduce “total linear movement” by 40%.
For more information regarding compressed or expanded lengths, refer to submittal 09.05.
+ Quoted on application. Contact Victaulic for pricing and availability.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Expansion Joint
STYLE 155
Refer to publication 09.05
Painted Couplings and Galvanized Couplings COUPLING COMPLETE with Grade COUPLING COMPLETE with Grade
Uncoated CS Pipe and Galvanized CS Approx. “E” or “T” Gasket and Carbon “E” or “T” Gasket and Stainless
Sections Pipe Sections Wgt. Ea. Steel Bolts & Nuts Steel Bolts & Nuts
Painted Galvanized Painted Painted Galvanized Galvanized
Couplings Couplings Couplings Couplings Couplings Couplings
and or and and and or
Total Total Uncoated Galvanized Uncoated Uncoated Galvanized Galvanized
Nominal Linear Neutral Linear Neutral CS Pipe CS Pipe CS Pipe CS Pipe CS Pipe CS Pipe
Size Movement Position Movement Position Sections Sections Sections Sections Sections Sections
inches lb Price Each Price Each
0.25 16.13 0.15 16.13 100.3 $8645.00 $10805.50 + + + +
0.50 19.00 0.30 19.00 145.8 9863.00 12328.50 + + + +
0.75 21.88 0.45 21.88 191.4 11080.50 13851.50 + + + +
1.00 24.75 0.60 24.75 237.0 12299.50 15373.50 + + + +
1.25 27.63 0.75 27.63 282.5 13518.00 16896.50 + + + +
1.50 30.50 0.90 30.50 328.1 14735.50 18418.50 + + + +
12
1.75 33.38 1.05 33.38 373.6 15954.00 19941.50 + + + +
2.00 36.25 1.20 36.25 419.2 17171.00 21465.00 + + + +
2.25 39.13 1.35 39.13 464.8 18389.50 22986.50 + + + +
2.50 42.00 1.50 42.00 510.3 19608.00 24510.00 + + + +
2.75 44.88 1.65 44.88 555.9 20825.50 26031.00 + + + +
3.00 47.75 1.80 47.75 601.4 22043.50 27555.50 + + + +
When using the hot dipped galvanized coating, the movement capacity of the Style 155 Expansion Join is reduced due to the
increased coating thickness. The following reduction factors shall be applied to the “total linear movement” values:
- For either hot dipped galvanized couplings or pipe sections, reduce “total linear movement” by 20%.
- For both hot dipped galvanized couplings and pipe sections, reduce “total linear movement” by 40%.
For more information regarding compressed or expanded lengths, refer to submittal 09.05.
+ Quoted on application. Contact Victaulic for pricing and availability.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
C A A N 155 P E Z
Size Movement
Class in/mm in Length Style Finish Gasket Bolts and Nuts
C A - ¾/26.9 A - 0.19 C - Compressed 155 P - Painted Couplings E - EPDM Z - Plated
B - 1/33.7 B - 0.25 N - Neutral and Uncoated Pipe T - Nitrile X - Stainless Steel
C - 1¼/42.4 C - 0.38 E - Expanded Sections O - Fluoroelastomer
D - 1½/48.3 D - 0.50 L - Silicone
E - 2/60.3 E - 0.57 F - MWS EPDM
F - 2½/73.0 F - 0.75 G - MWS Nitrile
G - 76.1 mm G - 0.76
H - 3/88.9 H - 0.95
I - 3½/101.6 I - 1.00
J - 4/114.3 J - 1.14
K - 5/141.3 K - 1.25
L - 139.7 mm L - 1.33
M - 6/168.3 M - 1.50
N - 165.1 mm N - 1.52
O - 8/219.1 O - 1.71
P - 10/273.0 P - 1.75
Q - 12/323.9 Q - 1.90
R - 2.00
S - 2.09
T - 2.25
U - 2.28
X - 2.50
Y - 2.75
Z - 3.00
Size Movement
Class in/mm in Length Style Finish Gasket Bolts and Nuts
C A - ¾/26.9 A - 0.11 C - Compressed 155 G - Galvanized Couplings E - EPDM Z - Plated
B - 1/33.7 B - 0.15 N - Neutral and Galvanized T - Nitrile X - Stainless Steel
C - 1¼/42.4 C - 0.23 E - Expanded Pipe Sections O - Fluoroelastomer
D - 1½/48.3 D - 0.30 L - Silicone
E - 2/60.3 E - 0.34 F - MWS EPDM
F - 2½/73.0 F - 0.45 G - MWS Nitrile
G - 76.1 mm G - 0.46
H - 3/88.9 H - 0.57
I - 3½/101.6 I - 0.60
J - 4/114.3 J - 0.68
K - 5/141.3 K - 0.75
L - 139.7 mm L - 0.80
M - 6/168.3 M - 0.90
N - 165.1 mm N - 0.91
O - 8/219.1 O - 1.03
P - 10/273.0 P - 1.05
Q - 12/323.9 Q - 1.14
R - 1.20
S - 1.25
T - 1.35
U - 1.37
X - 1.50
Y - 1.65
Z - 1.80
Size Movement
Class in/mm in Length Style Finish Gasket Bolts and Nuts
C A - ¾/26.9 A - 0.15 C - Compressed 155 1 - Galvanized Couplings E - EPDM Z - Plated
B - 1/33.7 B - 0.20 N - Neutral 2 - Galvanized Pipe T - Nitrile X - Stainless Steel
C - 1¼/42.4 C - 0.30 E - Expanded Sections O - Fluoroelastomer
D - 1½/48.3 D - 0.40 L - Silicone
E - 2/60.3 E - 0.46 F - MWS EPDM
F - 2½/73.0 F - 0.60 G - MWS Nitrile
G - 76.1 mm G - 0.61
H - 3/88.9 H - 0.76
I - 3½/101.6 I - 0.80
J - 4/114.3 J - 0.91
K - 5/141.3 K - 1.00
L - 139.7 mm L - 1.06
M - 6/168.3 M - 1.20
N - 165.1 mm N - 1.22
O - 8/219.1 O - 1.37
P - 10/273.0 P - 1.40
Q - 12/323.9 Q - 1.52
R - 1.60
S - 1.67
T - 1.80
U - 1.82
X - 2.00
Y - 2.20
Z - 2.40
STYLE 155P – EXPANSION JOINT FOR OGS POTABLE WATER PIPING SYSTEMS
C A A N 155P H P Z
Size
Class in/mm Movement Length Style Finish Gasket Bolts and Nuts
C E - 2/50 A - 0.19 C - Compressed 155 H - Painted Blue P - Fluoroelastomer Blend Z - Plated
F - 2½/65 B - 0.25 N - Neutral X - Stainless Steel
H - 3/80 C - 0.38 E - Expanded
J - 4/100 D - 0.50
M - 6/150 E - 0.57
O - 8/200 F - 0.75
P - 10/250 G - 0.76
Q - 12/300 H - 0.95
I - 1.00
J - 1.14
K - 1.25
L - 1.33
M - 1.50
N - 1.52
O - 1.71
P - 1.75
Q - 1.90
R - 2.00
S - 2.09
T - 2.25
U - 2.28
X - 2.50
Y - 2.75
Z - 3.00
Overall
Nominal Size Actual Outside Dia. Settlement
1” 2” 3” 4”
inches No. Pairs Price Each
1 + + + +
2 + + + +
2 2.375
3 + + + +
4 + + + +
1 + + + +
2 + + + +
2Z\x 2.875
3 + + + +
4 + + + +
1 + + + +
2 + + + +
3 3.500
3 + + + +
4 + + + +
1 + + + +
2 + + + +
4 4.500
3 + + + +
4 + + + +
1 + + + +
2 + + + +
5 5.562
3 + + + +
4 + + + +
1 + + + +
2 + + + +
6 6.625
3 + + + +
4 + + + +
1 + + + +
2 + + + +
8 8.625
3 + + + +
4 + + + +
1 + + + +
2 + + + +
10 10.750
3 + + + +
4 + + + +
1 + + + +
2 + + + +
12 12.750
3 + + + +
4 + + + +
Approx.
Anchor Nominal Size Weight Each
inches lb Price Each
NO. A10
2 10.0 $996.50
Refer to publication 07.70
2Z\x 14.0 1087.50
3 17.0 1147.50
4 30.0 1510.00
5 42.0 1661.50
6 68.0 1721.50
8 90.0 1842.50
10 135.0 2476.50
12 152.0 2839.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Carbon Steel Heavy NO. A20 CARBON STEEL HEAVY RISER ANCHOR
Approx.
Riser Anchor Nominal Size Weight Each
inches lb Price Each
NO. A20
2 25.9 $3816.00
Refer to publication 07.72
2Z\x 31.4 3922.00
3 36.3 4028.00
4 47.0 4240.00
5 58.3 4452.00
6 90.1 4664.00
8 125.2 5088.00
10 167.5 5512.00
12 197.9 5830.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Carbon Steel Riser NO. A40 CARBON STEEL RISER ANCHOR FOR TIGHT SPACES
Approx.
Anchor for Tight Nominal Size Weight Each
Spaces inches lb Price Each
2 10.1 $1040.00
NO. A40 2Z\x 14.3 1134.50
Refer to publication 07.74 3 18.2 1197.00
4 25.1 1574.50
5 33.1 1961.00
6 55.3 1795.00
8 77.5 2332.00
10 117.4 2582.50
12 142.7 2960.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
AGS Carbon NO. WA20 AGS CARBON STEEL HEAVY RISER ANCHOR
Approx.
Steel Heavy Riser Nominal Size Weight Each
Anchor inches lb Price Each
14 382.0 $12773.00
NO. WA20 16 421.3 14350.50
Refer to publication 20.72 18 460.5 16731.50
20 645.0 19723.50
24 741.6 21035.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Carbon Steel Riser NO. A190 CARBON STEEL RISER MOVEMENT FITTING
Approx.
Movement Fitting Nominal Size Weight Each
inches lb Price Each
NO. A190
2 35.5 $3711.50
Refer to publication 102.90
2Z\x 46.9 4328.00
3 57.3 4611.00
4 85.6 5678.50
6 151.4 9203.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Carbon Steel Anchor NO. A191 CARBON STEEL ANCHOR OUTLET FITTING
Approx.
Outlet Fitting Nominal Size Wgt Each
inches lb Price Each
NO. A191
2 46.9 $2985.00
Refer to publication 102.91
4 x 2Z\x 47.1 2985.00
3 47.3 2985.00
2 59.7 +
2Z\x 60.4 +
5 x
3 61.8 +
4 61.9 +
2 96.0 4370.50
2Z\x 95.8 4370.50
6 x
3 100.9 4370.50
4 99.4 4370.50
2 136.6 5490.00
2Z\x 142.1 5490.00
8 x 3 136.7 5666.00
4 144.9 6503.50
6 145.4 6503.50
2 218.7 8088.00
2Z\x 219.1 8141.00
10 x 3 216.7 8193.00
4 217.7 8247.00
6 215.7 8904.00
2 268.0 9081.50
2Z\x 266.0 9120.50
12 x 3 270.0 9157.50
4 268.0 9195.50
6 263.0 9272.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
Hydraulic Control
Valves
inches Victaulic Part Code Price Each Victaulic Part Code Price Each
VICTAULIC SERIES 972-SS
1Z\x S014972X0F $7816.00 S014972XHF $12492.00
BERMAD MODEL BC-720-P-SS
2 S020972X0F 9183.00 S020972XHF 14253.50
Stainless Steel 316 Body 2Z\x S024972X0F 11548.50 S024972XHF 14329.50
Stainless Steel 303 Internals 3 S030972X0F 14083.50 S030972XHF 18946.00
Y-Pattern 4 S040972X0F 15913.00 S040972XHF 30552.50
SS 316 Tube/Fitting and
6 S060972X0F 29149.50 S060972XHF 47127.00
Control Accessories
Pressure up to 400 psi 8 S080972X0F 43578.00 S080972XHF 68672.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
* Other finishes and valve body materials available upon request.
(250 – 400 psi) inches Victaulic Part Code Price Each Victaulic Part Code Price Each
1Z\x S014972X1F $5764.00 S014972X3F $6295.50
VICTAULIC SERIES 972-PD-SS 2 S020972X1F 6553.50 S020972X3F 7123.00
BERMAD MODEL BC-720-PD-SS
2Z\x S024972X1F 7400.00 S024972X3F 7748.50
Stainless Steel 316 Body 3 S030972X1F 11327.00 S030972X3F 11646.50
Y-Pattern 4 S040972X1F 14523.00 S040972X3F 16504.00
SS 316 Tube/Fitting with SS 6 S060972X1F 24960.00 S060972X3F 29025.50
Control Accessories.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Pressure up to 400 psi
* Other finishes and valve body materials available upon request.
Victaulic Series 979-4/Bermad Model BC-794-P Excessive Pressure Shut Off Valve
Victaulic Series 972S-H/Bermad Model BC-72S-H-P Pressure Reducing System with “Watchdog” Hydraulic Backup Valve
Watchdog PRV Combo Nominal Size Watchdog PRV Combo with Integrated Low-Flow Bypass
with Integrated Grooved (Standard)
inches Victaulic Part Code Price Each
Low-Flow Bypass 1Z\x S014972H2G $9963.00
(300 psi) 2 S020972H2G 10046.00
2Z\x S024972H2G 10467.00
VICTAULIC SERIES 972S-2B-H 3 S030972H2G 11684.50
BERMAD MODEL BC-72S-2B-H-P
4 S040972H2G 13694.50
Ductile Iron Body - Epoxy 6 S060972H2G 21274.50
Coated 8 S080972H2G 26916.00
Y-Pattern NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
SS 316 Tube/Fitting with SS
Control Accessories
Integrated Brass Direct Acting
PRV as Low-Flow Bypass (Series
935-H)
Pressure up to 300 psi
Pressure Reducing Nominal Size Pressure Reducing Valve with Integral Low-Flow Bypass
Valve with Integral Grooved (Standard)
inches Victaulic Part Code Price Each
Low-Flow Bypass 1Z\x S014972PLG $5167.00
(300 psi) 2 S020972PLG 5213.00
2Z\x S024972PLG 5434.50
VICTAULIC SERIES 972-2B 3 S030972PLG 6144.00
BERMAD MODEL BC-720-2B-P
4 S040972PLG 7461.00
Ductile Iron Body - Epoxy 6 S060972PLG 11520.00
Coated 8 S080972PLG 14717.50
Y-Pattern NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
SS 316 Tube/Fitting with SS
Control Accessories and Brass
Low-Flow PRV
Pressure up to 300 psi
Victaulic Series 972-2B-SS/Bermad Model BC-720-2B-P-SS Pressure Reducing Valve with Integral Low-Flow Bypass
Pressure Reducing Nominal Size Pressure Reducing Valve with Integral Low-Flow Bypass
Valve with Integral Flanged (ANSI 150) Flanged (ANSI 300)
inches Victaulic Part Code Price Each Victaulic Part Code Price Each
Low-Flow Bypass 1Z\x S014972X1L $7068.50 S014972X3L $7068.50
(300 psi) 2 S020972X1L 7162.50 S020972X3L 7162.50
2Z\x S024972X1L 8229.50 S024972X3L 8229.50
VICTAULIC SERIES 972-2B-SS 3 S030972X1L 11102.50 S030972X3L 11218.00
BERMAD MODEL BC-720-2B-P-SS
4 S040972X1L 14267.00 S040972X3L 15370.00
Stainless Steel 316 Body 6 S060972X1L 21397.50 S060972X3L 23494.50
Y-Pattern 8 S080972X1L 34336.50 S080972X3L 37194.50
SS 316 Tube/Fitting with SS NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Control Accessories and Brass
Low-Flow Bypass PRV
Pressure up to 300 psi
Level Control Valve Nominal Size Basic Level Control Valve with V-Port
with Modulating Grooved (Standard)
inches Victaulic Part Code Price Each
Altitude Pilot 1Z\x S01497500G $9542.00
(250 psi) 2 S02097500G 9582.50
2Z\x S02497500G 9810.50
VICTAULIC SERIES 975-82 3 S03097500G 10510.50
BERMAD MODEL BC-750-82
4 S04097500G 11394.50
Ductile Iron Body - Fusion 6 S06097500G 15520.00
Bonded Epoxy Coated 8 S08097500G 18654.00
Y-Pattern NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Level Settings: 7 - 46 ft.
* Other finishes and valve body materials available upon request.
SS 316 Tube/Fitting and
Control Accessories
Pressure up to 250 psi
Victaulic Series 975-67/Bermad Model BC-750-67-P Level Control Valve with Modulating Vertical Float
Level Control Valve Nominal Size Basic Level Control Valve with V-Port (Standard)
with Modulating Grooved (Standard)
inches Victaulic Part Code Price Each
Vertical Float 1Z\x S01497567G $7287.50
(250 psi) 2 S02097567G 7329.00
2Z\x S02497567G 7558.50
VICTAULIC SERIES 975-67 3 S03097567G 8274.50
BERMAD MODEL BC-750-67-P
4 S04097567G 9148.00
Ductile Iron Body - Fusion 6 S06097567G 13244.50
Bonded Epoxy Coated 8 S08097567G 16377.00
Y-Pattern NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
SS 316 Tube/Fitting and
* Other finishes and valve body materials available upon request.
Control Accessories
Pressure up to 250 psi
Direct Acting Pressure Nominal Size Direct Acting Pressure Reducing Valve
Reducing Valve FNPT Threads with Pressure Gauge
inches Victaulic Part Code Price Each
(300 psi) Z\x S0049353FF $339.00
C\v S0069353FF 361.50
VICTAULIC SERIES 935-H
1 S0109353FF 463.50
BERMAD MODEL BC-CAP-P
1Z\v S0129353FF 948.50
Female Threaded Ends Only 1Z\x S0149353FF 1217.50
Pressure up to 300 psi 2 S0209353FF 1407.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Spare Parts
NSF Actuator Nominal Size Victaulic
inches Part Code Price Each
Assembly with V-Port 1Z\x – 2Z\x* P014972ACT $1193.50
3 P030972ACT 1553.00
Grooved, Flanged or Threaded
4 P040972ACT 2180.00
Ends
6 P060972ACT 5275.50
*The list price for the 2Z\x” size shown above is for flanged or threaded ends only.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
2Z\x” Grooved Ends Only NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Air Valves
NOTE: For pricing valve options and configurations not listed above, contact Victaulic.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Hydronic Balancing
Products
Nominal Size
Female NPT inches Victaulic Part Code List Price
Z\x – C\v P00478B2HL $65.00
1 – 1Z\v P01078B2HL 81.50
1Z\x – 2 P01478B2HL 81.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Sweat
Victaulic IMI TA
DRAIN KIT Part Code Code List Price
Refer to publication 08.16 K000786CBV 52-167-997 $85.50 NR
NR
Non-returnable
* For use with TA Series 786H valves only.
NOTE: If a drain is needed for a Series 787H or a Series 78KH, be sure to choose the valve assembly with the factory installed
option. Standard Series 787H or Series 78KH valves cannot be field retrofitted.
Spare Parts IMI TA SPARE PARTS (FOR TA SERIES 786, TA SERIES 787H, SERIES 78KH, TA SERIES 788 AND TA SERIES 789)
TA Series TA Series NOTE: By measuring the pressure drop across measuring ports at a particular handwheel setting, the water flow for the valve
size can be read easily from the appropriate pressure drop graph or flow balancing wheel. Request flow balancing wheels from
786H/787H 788/789 your local Hydronic Balancing Specialist (Victaulic part number K000740000).
Plastic Plastic
Handwheel Handwheel
Z\x – 2” 2Z\x – 6”
TA Series
788/789
Aluminum
Handwheel
8 – 16”
Approx.
FEMALE X FEMALE THREADED Nominal Size Wgt. Ea. Victaulic
inches lb Part Code List Price
Refer to publication 08.34
Z\x 1.3 V00476T0_ _ $207.50
C\v 1.3 V00676T0_ _ 209.50
1 1.5 V01076T0_ _ 231.50
1 HF 3.4 V01H76T0_ _ 440.50
1Z\v 3.4 V01276T0_ _ 440.50
1Z\x 3.4 V01476T0_ _ 440.50
2 3.7 V02076T0_ _ 480.50
* Last two part code numbers are based on cartridge codes found in publication 08.34.
Prices shown reflect an automatic balancing valve body with either high or low flow cartridge(s).
Approx.
FEMALE X FEMALE THREADED Nominal Size Wgt. Ea. Victaulic
inches lb Part Code List Price
WITH A BALL VALVE KIT
Refer to publication 08.34 Z\x 1.7 V00476B0_ _ $332.50
C\v 2.1 V00676B0_ _ 339.00
1 2.6 V01076B0_ _ 394.50
1 HF 4.6 V01H76B0_ _ 604.50
1Z\v 5.1 V01276B0_ _ 682.50
1Z\x 2.8 V01476B0_ _ 731.00
2 6.6 V02076B0_ _ 856.00
* Last two part code numbers are based on cartridge codes found in publication 08.34.
Prices shown reflect an automatic balancing valve body with either high or low flow cartridge(s).
Approx.
MALE X FEMALE THREADED Nominal Size Wgt. Ea. Victaulic
inches lb Part Code List Price
Refer to publication 08.34
Z\x 1.5 V00476K1_ _ $283.50
C\v 2.0 V00676K1_ _ 288.50
1 3.5 V01076K1_ _ 321.00
1 HF 5.4 V01076K1_ _ 528.00
1Z\v 5.4 V01276K1_ _ 528.00
1Z\x 5.5 V01476K1_ _ 604.50
2 5.9 V02076K1_ _ 608.00
* Last two part code numbers are based on cartridge codes found in publication 08.34.
Prices shown reflect an automatic balancing valve body with either high or low flow cartridge(s).
Approx.
MALE X FEMALE THREADED Nominal Size Wgt. Ea. Victaulic
inches lb Part Code List Price
WITH A BALL VALVE KIT
Refer to publication 08.34 Z\x 1.9 V00476V1_ _ $411.50
C\v 2.8 V00676V1_ _ 418.00
1 4.7 V01076V1_ _ 483.50
1 HF 6.6 V01H76V1_ _ 677.00
1Z\v 7.2 V01276V1_ _ 758.00
1Z\x 7.9 V01476V1_ _ 894.50
2 8.8 V02076V1_ _ 986.00
* Last two part code numbers are based on cartridge codes found in publication 08.34.
Prices shown reflect an automatic balancing valve body with either high or low flow cartridge(s).
Approx.
GROOVED Nominal Size Wgt. Ea. Victaulic
inches lb Part Code List Price
Refer to publication 08.34
2Z\x 17.0 V02476G1 _ _ * $2289.50
3 18.0 V03076G1 _ _ * 2365.50
4 33.0 V04076G1 _ _ * 3661.50
6 52.0 V06076G1 _ _ * 7168.50
* For sizes 2Z\x” and 3”, the last two part code numbers are based on cartridge codes found in publication 08.34. Please contact
Victaulic when configurating sizes 4” and 6”.
Prices shown reflect an automatic balancing valve body with either high or low flow cartridge(s).
Note: The 4" size takes two (2) cartridges and the 6" size takes four (4) cartridges for sizing flows. Customer needs to provide
total flow rate when ordering.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
PT Port
Tailpiece Accessories TA SERIES 7CP, 7MP FEMALE, SWEAT, AND MALE TAILPIECE ACCESSORIES
Assembled Tailpiece
for 7CP and 7MP Nominal Size
Size Female Sweat Male
inches Victaulic Part Code Victaulic Part Code Victaulic Part Code List Price
Z\x P0047CPF04 P0047CPS04 P0047CTM04 $37.50
C\v P0067CPF06 P0067CPS06 P0067CTM06 53.00
1 P0107CPF10 P0107CPS10 P0107CTM10 79.00
1Z\v * P0127CPF12 P0127CPS12 – 106.00
1Z\x ** P0147MPF14 P0147MPS14 – 135.00
2 ** P0207MPF20 P0207MPS20 – 271.00
Replacement Tailpiece Gasket
Female Sweat Male List Price
Z\x P0047CTGSK P0047CTGSK P0047CTGSK $5.00
C\v P0067CTGSK P0067CTGSK P0067CTGSK 5.00
1 P0107CTGSK P0107CTGSK P0107CTGSK 6.00
1Z\v * P0127CPGSK P0127CPGSK – 7.00
1Z\x ** P0147MPGSK P0147MPGSK – 7.00
2 ** P0207MPGSK P0207MPGSK – 7.00
TA SERIES 7CP, 7MP FEMALE TAILPIECE REDUCER
Koil-Kit™ Coil
Control Valve Pack Figure String
Actuators Actuator
Victaulic Part
Code
Actuator Choice
Positions 23 – 24 List Price
EMO 3 – Three Point Mechanical Actuator P000TCMAE3 E3 $324.50
EMO-TM – Modulating Actuator 24VAC P000TCMANC 0M 252.50
EMO-T NC * – Normally Closed Actuator 24VAC/VDC P0000TCANC NC 193.00
EMO-T NO * – Normally Open Actuator 24VAC/VDC P0000TCANP NP 193.00
SLIDER-160 24VAC/VDC P0007MPS10 S0 250.50
SLIDER - 160 I/O 24VAC/VDC P0007MPS1I SI 359.50
SLIDER-160 PLUS 24VAC/VDC P0007MPS1P SP 367.00 NR
TA ACT SP RTRN NC – Normally Closed 24VAC P000ACT001 F1 307.50
TA ACT SP RTRN NO – Normally Open 24VAC P000ACT002 F2 307.50
TA ACT SP RTRN NC – Normally Closed 110VAC P000ACT003 F3 307.50
TA ACT SP RTRN NO – Normally Open 110VAC P000ACT004 F4 307.50
TA ACTM NC - Normally Closed 24VAC, 0–10VDC Signal P000ACT005 F5 608.50
TA ACTM NO - Normally Open 24VAC, 0–10VDC Signal P000ACT006 F6 608.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
NR
Non-returnable
* Four minute cycle time from cold.
TA Series 7CP
COMPACT PRESSURE INDEPENDENT
BALANCING AND CONTROL VALVE
Refer to publication 08.37
TA SERIES 7CP
TA SERIES 7CP
TA SERIES 7CP
TA SERIES 7CP
Koil-Kit™ Coil
Sizes ½ – 2” – Brass Koil-Kit™ Coil Pack Figure
Pack Figure String Actuator
PRESSURE INDEPENDENT Nominal End Connection Size String Choice
BALANCING AND MODULATING Size inches Positions 18 – 22 Positions 23 – 24
CONTROL VALVE Valve Body
Refer to publication 08.55 Inlet Outlet
inches Actuator Connection Connection Modulator Code List Price
SLIDER-160 S0 $812.00
SLIDER-160 PLUS C\v – Female 1 – Female 8BFCF SP 929.00
SLIDER-160 KNX SK 954.00
SLIDER-160 S0 812.00
SLIDER-160 I/O SI 921.00
1 – Female 1 – Female 8CFCF
1 SLIDER-160 PLUS SP 929.00
SLIDER-160 KNX SK 954.00
SLIDER-160 S0 812.00
SLIDER-160 I/O SI 921.00
1 – Male 1 – Female 8CMCF
SLIDER-160 PLUS SP 929.00
SLIDER-160 KNX SK 954.00
SLIDER-160 S0 1096.50
SLIDER-160 I/O SI 1205.50
1 – Female 1Z\v – Female 8CFDF
SLIDER-160 PLUS SP 1213.50
SLIDER-160 KNX SK 1238.50
1Z\v
SLIDER-160 S0 1096.50
SLIDER-160 I\O SI 1205.50
1Z\v – Female 1Z\v – Female 8DFDF
SLIDER-160 PLUS SP 1213.50
SLIDER-160 KNX SK 1238.50
SLIDER-500 50 2151.00
SLIDER-500 I/O 1Z\x – Female 8EFEF 5I 2278.00
SLIDER-500 PLUS 5P 2391.50
1Z\x – Female
SLIDER-500 50 2151.00
SLIDER-500 I/O 1Z\x – Sweat 8EFES 5I 2278.00
SLIDER-500 PLUS 5P 2391.50
1Z\x
SLIDER-500 50 2151.00
SLIDER-500 I/O 1Z\x – Sweat 8ESES 5I 2278.00
SLIDER-500 PLUS 5P 2391.50
1Z\x – Sweat
SLIDER-500 50 2151.00
SLIDER-500 I/O 1Z\x – Female 8ESEF 5I 2278.00
SLIDER-500 PLUS 5P 2391.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Additional end configurations available. Contact Victaulic for details.
Koil-Kit™ Coil
Sizes ½ – 2” – Brass Koil-Kit™ Coil Pack Figure
Pack Figure String Actuator
PRESSURE INDEPENDENT Nominal End Connection Size String Choice
BALANCING AND MODULATING Size inches Positions 18 – 22 Positions 23 – 24
CONTROL VALVE Valve Body
Refer to publication 08.55 Inlet Outlet
inches Actuator Connection Connection Modulator Code List Price
SLIDER-500 50 $2523.50
SLIDER-500 I/O 2 – Female 8FFFF 5I 2650.50
SLIDER-500 PLUS 5P 2764.00
2 – Female
SLIDER-500 50 2523.50
SLIDER-500 I/O 2 – Sweat 8FFFS 5I 2650.50
SLIDER-500 PLUS 5P 2764.00
SLIDER-500 50 2523.50
SLIDER-500 I/O 2 – Sweat 8FSFS 5I 2650.50
SLIDER-500 PLUS 5P 2764.00
2 2 – Sweat
SLIDER-500 50 2523.50
SLIDER-500 I/O 2 – Female 8FSFF 5I 2650.50
SLIDER-500 PLUS 5P 2764.00
SLIDER-500 50 2523.50
SLIDER-500 I/O 1Z\x – Female 2 – Female 8EFFF 5I 2650.50
SLIDER-500 PLUS 5P 2764.00
SLIDER-500 50 2523.50
SLIDER-500 I/O 1Z\x – Female 2 – Sweat 8EFFS 5I 2650.50
SLIDER-500 PLUS 5P 2764.00
EMO-TM 0M 676.00
TA ACTM N.C. F5 1032.50
Z\x HF – TA ACTM N.O. F6 1032.50
uses C\v” SLIDER-160 Z\x – Female Z\x – Female 81F1F S0 674.00
body SLIDER-160 I/O SI 783.00
SLIDER-160 PLUS SP 791.00
SLIDER-160 KNX SK 816.00
SLIDER-160 S0 812.00
C\v HF – SLIDER-160 I/O SI 921.00
uses 1” C\v – Female C\v – Female 82F2F
body SLIDER-160 PLUS SP 929.00
SLIDER-160 KNX SK 954.00
SLIDER-160 S0 1096.50
1 HF – SLIDER-160 I/O SI 1205.50
uses 1Z\v” 1 – Female 1 – Female 83F3F
body SLIDER-160 PLUS SP 1213.50
SLIDER-160 KNX SK 1238.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Additional end configurations available. Contact Victaulic for details.
Koil-Kit™
Sizes Z\x – 1” High Coil Pack
Pressure Koil-Kit™
Coil Pack
Figure
String
Figure Actuator
PRESSURE INDEPENDENT String Choice
BALANCING AND MODULATING Nominal End Connection Size Positions Positions
CONTROL VALVE Size inches 18 – 22 23 – 24
Refer to publication 08.55 Valve Body
Inlet Outlet
inches Actuator Connection Connection Modulator Code List Price
EMO-TM 0M $659.00
TA ACTM N.C. F5 1015.50
TA ACTM N.O. F6 1015.50
SLIDER-160 Z\x – Female Z\x – Female 9AFAF S0 657.00
SLIDER-160 I/O SI 766.00
SLIDER-160 PLUS SP 774.00
Z\x High SLIDER-160 KNX SK 799.00
Delta P EMO-TM 0M 659.00
TA ACTM N.C. F5 1015.50
TA ACTM N.O. F6 1015.50
SLIDER-160 Z\x – Male Z\x – Female 9AMAF S0 657.00
SLIDER-160 I/O SI 766.00
SLIDER-160 PLUS SP 774.00
SLIDER-160 KNX SK 799.00
EMO-TM 0M 752.00
TA ACTM N.C. F5 1108.50
TA ACTM N.O. F6 1108.50
SLIDER-160 Z\x – Female C\v – Female 9AFBF S0 750.00
SLIDER-160 I/O SI 859.00
SLIDER-160 PLUS SP 867.00
SLIDER-160 KNX SK 892.00
EMO-TM 0M 752.00
TA ACTM N.C. F5 1108.50
TA ACTM N.O. F6 1108.50
C\v High
SLIDER-160 C\v – Female C\v – Female 9BFBF S0 750.00
Delta P
SLIDER-160 I/O SI 859.00
SLIDER-160 PLUS SP 867.00
SLIDER-160 KNX SK 892.00
EMO-TM 0M 752.00
TA ACTM N.C. F5 1108.50
TA ACTM N.O. F6 1108.50
SLIDER-160 C\v – Male C\v – Female 9BMBF S0 750.00
SLIDER-160 I/O SI 859.00
SLIDER-160 PLUS SP 867.00
SLIDER-160 KNX SK 892.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Additional end configurations available. Contact Victaulic for details.
Koil-Kit™
Sizes Z\x – 1” Coil Pack
High Pressure Koil-Kit™
Coil Pack
Figure
String
Figure Actuator
PRESSURE INDEPENDENT String Choice
BALANCING AND MODULATING Nominal End Connection Size Positions Positions
CONTROL VALVE Size inches 18 – 22 23 – 24
Refer to publication 08.55 Valve Body
Inlet Outlet
inches Actuator Connection Connection Modulator Code List Price
SLIDER-160 S0 $910.00
SLIDER-160 I/O SI 1019.00
C\v – Female 1 – Female 9BFCF
SLIDER-160 PLUS SP 1027.00
SLIDER-160 KNX SK 1052.00
SLIDER-160 S0 910.00
SLIDER-160 I/O SI 1019.00
1 1 – Female 1 – Female 9CFCF
SLIDER-160 PLUS SP 1027.00
SLIDER-160 KNX SK 1052.00
SLIDER-160 S0 910.00
SLIDER-160 I/O SI 1019.00
1 – Male 1 – Female 9CMCF
SLIDER-160 PLUS SP 1027.00
SLIDER-160 KNX SK 1052.00
EMO-TM 0M 752.00
Z\x High TA ACTM N.C. F5 1108.50
Delta P HF – TA ACTM N.O. F6 1108.50
uses C\v”
SLIDER-160 Z\x – Female Z\x – Female 91F1F S0 750.00
High
Delta P SLIDER-160 I/O SI 859.00
body SLIDER-160 PLUS SP 867.00
SLIDER-160 KNX SK 892.00
C\v High SLIDER-160 S0 910.00
Delta P HF – SLIDER-160 I/O SI 1019.00
uses 1” C\v – Female C\v – Female 92F2F
High Delta P SLIDER-160 PLUS SP 1027.00
body SLIDER-160 KNX SK 1052.00
TA Series 7MP
Sizes 2Z\x – 3” – Ductile Iron
PRESSURE INDEPENDENT BALANCING AND
MODULATING CONTROL VALVE
Refer to publication 08.55
Nominal Size
inches
2Z\x 3
Actuator Code Victaulic Victaulic
Option Description Part Code List Price Part Code List Price
70 SL750/24 Std, 3-pt-24 VAC/VDC V0247MP070 $4027.00 V0307MP070 $4554.50
8A SL750/24 Adv, 3-pt-24 VAC/VDC-w/o opt board V0247MP08A 4278.50 V0307MP08A 4806.00
8B SL750/24 Adv, 3-pt-24 VAC/VDC-KNX-TP V0247MP08B 4470.50 V0307MP08B 4998.00
8C SL750/24 Adv, 3-pt-24 VAC/VDC-Modbus RS485 V0247MP08C 4512.50 V0307MP08C 5040.00
8D SL750/24 Adv, 3-pt-24 VAC/VDC-BACnet RS-485 V0247MP08D 4501.00 V0307MP08D 5028.50
8E SL750/24 Adv, 3-pt-24 VAC/VDC-Modbus/TCP V0247MP08E 4436.00 V0307MP08E 4963.50
8F SL750/24 Adv, 3-pt-24 VAC/VDC-KNX-IP V0247MP08F 4436.00 V0307MP08F 4963.50
8G SL750/24 Adv, 3-pt-24 VAC/VDC-BACnet/IP V0247MP08G 4436.00 V0307MP08G 4963.50
8I SL750/24 Adv, 3-pt-24 VAC/VDC-KNX-TP+Rly V0247MP08I 4526.00 V0307MP08I 5053.50
8J SL750/24 Adv, 3-pt-24 VAC/VDC-Modbus RS485+Rly V0247MP08J 4558.00 V0307MP08J 5085.50
8K SL750/24 Adv, 3-pt-24 VAC/VDC-BACnet RS-485+Rly V0247MP08K 4558.00 V0307MP08K 5085.50
8L SL750/24 Adv, 3-pt-24 VAC/VDC-Modbus/TCP+Rly V0247MP08L 4493.50 V0307MP08L 5021.00
8M SL750/24 Adv, 3-pt-24 VAC/VDC-KNX-IP+Rly V0247MP08M 4493.50 V0307MP08M 5021.00
8N SL750/24 Adv, 3-pt-24 VAC/VDC-BACnet/IP+Rly V0247MP08N 4493.50 V0307MP08N 5021.00
G0 SL750/HV Std, 3-pt-115/230 VAC V0247MP0G0 4340.00 V0307MP0G0 4867.50
HA SL750/HV Adv, 3-pt-115/230 VAC-w/o opt board V0247MP0HA 4592.50 V0307MP0HA 5120.00
HB SL750/HV Adv, 3-pt-115/230 VAC-KNX-TP V0247MP0HB 4783.00 V0307MP0HB 5310.50
HC SL750/HV Adv, 3-pt-115/230 VAC-Modbus RS485 V0247MP0HC 4825.00 V0307MP0HC 5352.50
HD SL750/HV Adv, 3-pt-115/230 VAC-BACnet RS-485 V0247MP0HD 4815.00 V0307MP0HD 5342.50
HE SL750/HV Adv, 3-pt-115/230 VAC-Modbus/TCP V0247MP0HE 4750.50 V0307MP0HE 5278.00
HF SL750/HV Adv, 3-pt-115/230 VAC-KNX-IP V0247MP0HF 4750.50 V0307MP0HF 5278.00
HG SL750/HV Adv, 3-pt-115/230 VAC-BACnet/IP V0247MP0HG 4750.50 V0307MP0HG 5278.00
HI SL750/HV Adv, 3-pt-115/230 VAC-KNX-TP+Rly V0247MP0HI 4841.00 V0307MP0HI 5368.50
HJ SL750/HV Adv, 3-pt-115/230 VAC-Modbus RS485+Rly V0247MP0HJ 4871.50 V0307MP0HJ 5399.00
HK SL750/HV Adv, 3-pt-115/230 VAC-BACnet RS-485+Rly V0247MP0HK 4871.50 V0307MP0HK 5399.00
HL SL750/HV Adv, 3-pt-115/230 VAC-Modbus/TCP+Rly V0247MP0HL 4806.00 V0307MP0HL 5333.50
HM SL750/HV Adv, 3-pt-115/230 VAC-KNX-IP+Rly V0247MP0HM 4806.00 V0307MP0HM 5333.50
HN SL750/HV Adv, 3-pt-115/230 VAC-BACnet/IP+Rly V0247MP0HN 4806.00 V0307MP0HN 5333.50
MS TA-MC100 FSE 24V AC/DC -010Vinput 4-20mA, 3-pt V0247MP0MS 6138.00 V0307MP0MS 6665.50
MT TA-MC100 FSR 24V AC/DC -010Vinput 4-20mA, 3-pt V0247MP0MT 6138.00 V0307MP0MT 6665.50
Nominal Size
inches
4 5
Actuator Code Victaulic Victaulic
Option Description Part Code List Price Part Code List Price
70 SL750/24 Std, 3-pt-24 VAC/VDC V0407MP070 $11339.00 V0507MP070 $17672.50
8A SL750/24 Adv, 3-pt-24 VAC/VDC-w/o opt board V0407MP08A 11590.50 V0507MP08A 17924.00
8B SL750/24 Adv, 3-pt-24 VAC/VDC-KNX-TP V0407MP08B 11782.50 V0507MP08B 18116.00
8C SL750/24 Adv, 3-pt-24 VAC/VDC-Modbus RS485 V0407MP08C 11824.50 V0507MP08C 18158.00
8D SL750/24 Adv, 3-pt-24 VAC/VDC-BACnet RS-485 V0407MP08D 11813.00 V0507MP08D 18146.50
8E SL750/24 Adv, 3-pt-24 VAC/VDC-Modbus/TCP V0407MP08E 11748.00 V0507MP08E 18081.50
8F SL750/24 Adv, 3-pt-24 VAC/VDC-KNX-IP V0407MP08F 11748.00 V0507MP08F 18081.50
8G SL750/24 Adv, 3-pt-24 VAC/VDC-BACnet/IP V0407MP08G 11748.00 V0507MP08G 18081.50
8H SL750/24 Adv, 3-pt-24 VAC/VDC-Rly V0407MP08H 11707.50 V0507MP08H 18041.00
8I SL750/24 Adv, 3-pt-24 VAC/VDC-KNX-TP+Rly V0407MP08I 11838.00 V0507MP08I 18171.50
8J SL750/24 Adv, 3-pt-24 VAC/VDC-Modbus RS485+Rly V0407MP08J 11870.00 V0507MP08J 18203.50
8K SL750/24 Adv, 3-pt-24 VAC/VDC-BACnet RS-485+Rly V0407MP08K 11870.00 V0507MP08K 18203.50
8L SL750/24 Adv, 3-pt-24 VAC/VDC-Modbus/TCP+Rly V0407MP08L 11805.50 V0507MP08L 18139.00
8M SL750/24 Adv, 3-pt-24 VAC/VDC-KNX-IP+Rly V0407MP08M 11805.50 V0507MP08M 18139.00
8N SL750/24 Adv, 3-pt-24 VAC/VDC-BACnet/IP+Rly V0407MP08N 11805.50 V0507MP08N 18139.00
G0 SL750/HV Std, 3-pt-115/230 VAC V0407MP0G0 11652.00 V0507MP0G0 17985.50
HA SL750/HV Adv, 3-pt-115/230 VAC-w/o opt board V0407MP0HA 11904.50 V0507MP0HA 18238.00
HB SL750/HV Adv, 3-pt-115/230 VAC-KNX-TP V0407MP0HB 12095.00 V0507MP0HB 18428.50
HC SL750/HV Adv, 3-pt-115/230 VAC-Modbus RS485 V0407MP0HC 12137.00 V0507MP0HC 18470.50
HD SL750/HV Adv, 3-pt-115/230 VAC-BACnet RS-485 V0407MP0HD 12127.00 V0507MP0HD 18460.50
HE SL750/HV Adv, 3-pt-115/230 VAC-Modbus/TCP V0407MP0HE 12062.50 V0507MP0HE 18396.00
HF SL750/HV Adv, 3-pt-115/230 VAC-KNX-IP V0407MP0HF 12062.50 V0507MP0HF 18396.00
HG SL750/HV Adv, 3-pt-115/230 VAC-BACnet/IP V0407MP0HG 12062.50 V0507MP0HG 18396.00
HH SL750/HV Adv, 3-pt-115/230 VAC-Rly V0407MP0HH 12021.00 V0507MP0HH 18354.50
HI SL750/HV Adv, 3-pt-115/230 VAC-KNX-TP+Rly V0407MP0HI 12153.00 V0507MP0HI 18486.50
HJ SL750/HV Adv, 3-pt-115/230 VAC-Modbus RS485+Rly V0407MP0HJ 12183.50 V0507MP0HJ 18517.00
HK SL750/HV Adv, 3-pt-115/230 VAC-BACnet RS-485+Rly V0407MP0HK 12183.50 V0507MP0HK 18517.00
HL SL750/HV Adv, 3-pt-115/230 VAC-Modbus/TCP+Rly V0407MP0HL 12118.00 V0507MP0HL 18451.50
HM SL750/HV Adv, 3-pt-115/230 VAC-KNX-IP+Rly V0407MP0HM 12118.00 V0507MP0HM 18451.50
HN SL750/HV Adv, 3-pt-115/230 VAC-BACnet/IP+Rly V0407MP0HN 12118.00 V0507MP0HN 18451.50
MS TA-MC100 FSE 24V AC/DC -010Vinput 4-20mA, 3-pt V0407MP0MS 13450.00 V0507MP0MS 19783.50
MT TA-MC100 FSR 24V AC/DC -010Vinput 4-20mA, 3-pt V0407MP0MT 13450.00 V0507MP0MT 19783.50
Nominal Size
inches
Actuator 4 HF
Code Supply Victaulic
Option Voltage Input Signal Options Part Code List Price
50 24 VAC/VDC SL1250/0(2)- 10 VDC, 0(4)-20 mA, 3-point, on-off V0407MPH50 $13660.50
E0 100-240 VAC SL1250/ 0(2)- 10 VDC, 0(4)-20 mA, 3-point, on-off V0407MPHE0 13975.00
6A 24 VAC/VDC SL1250/With binary input, relays, mA output V0407MPH6A 13911.50
FA 100-240 VAC SL1250/With binary input, relays, mA output V0407MPHFA 14226.00
6B 24 VAC/VDC SL1250/KNX-TP Twisted Pair with BUS communication (without binary input, relays, mA output) V0407MPH6B 14104.00
6C 24 VAC/VDC SL1250/Modbus/RTU RS 485 with BUS communication (without binary input, relays, mA output) V0407MPH6C 14146.00
6D 24 VAC/VDC SL1250/BACnet MS/TP RS 485 with BUS communication (without binary input, relays, mA output) V0407MPH6D 14135.50
6E 24 VAC/VDC SL1250/Modbus/TCP Ethernet with BUS communication (without binary input, relays, mA output) V0407MPH6E 14069.50
6F 24 VAC/VDC SL1250/KNX/IP Ethernet with BUS communication (without binary input, relays, mA output) V0407MPH6F 14069.50
6G 24 VAC/VDC SL1250/BACnet/IP Ethernet with BUS communication (without binary input, relays, mA output) V0407MPH6G 14069.50
FB 100-240 VAC SL1250/KNX-TP Twisted Pair with BUS communication (without binary input, relays, mA output) V0407MPHFB 14417.50
FC 100-240 VAC SL1250/Modbus/RTU RS 485 with BUS communication (without binary input, relays, mA output) V0407MPHFC 14460.00
FD 100-240 VAC SL1250/BACnet MS/TP RS 485 with BUS communication (without binary input, relays, mA output) V0407MPHFD 14447.50
FE 100-240 VAC SL1250/Modbus/TCP Ethernet with BUS communication (without binary input, relays, mA output) V0407MPHFE 14384.00
FF 100-240 VAC SL1250/KNX/IP Ethernet with BUS communication (without binary input, relays, mA output) V0407MPHFF 14384.00
FG 100-240 VAC SL1250/BACnet/IP Ethernet with BUS communication (without binary input, relays, mA output) V0407MPHFG 14384.00
6I 24 VAC/VDC SL1250/KNX-TP Twisted Pair with BUS communication (with binary input, relays, mA output) V0407MPH6I 14160.50
6J 24 VAC/VDC SL1250/Modbus/RTU RS 485 with BUS communication (with binary input, relays, mA output) V0407MPH6J 14190.50
6K 24 VAC/VDC SL1250/BACnet MS/TP RS 485 with BUS communication (with binary input, relays, mA output) V0407MPH6K 14190.50
6L 24 VAC/VDC SL1250/Modbus/TCP Ethernet with BUS communication (with binary input, relays, mA output) V0407MPH6L 14127.00
6M 24 VAC/VDC SL1250/KNX/IP Ethernet with BUS communication (with binary input, relays, mA output) V0407MPH6M 14127.00
6N 24 VAC/VDC SL1250/BACnet/IP Ethernet with BUS communication (with binary input, relays, mA output) V0407MPH6N 14127.00
FI 100-240 VAC SL1250/KNX-TP Twisted Pair with BUS communication (with binary input, relays, mA output) V0407MPHFI 14473.50
FJ 100-240 VAC SL1250/Modbus/RTU RS 485 with BUS communication (with binary input, relays, mA output) V0407MPHFJ 14505.00
FK 100-240 VAC SL1250/BACnet MS/TP RS 485 with BUS communication (with binary input, relays, mA output) V0407MPHFK 14505.00
FL 100-240 VAC SL1250/Modbus/TCP Ethernet with BUS communication (with binary input, relays, mA output) V0407MPHFL 14439.50
FM 100-240 VAC SL1250/KNX/IP Ethernet with BUS communication (with binary input, relays, mA output) V0407MPHFM 14439.50
FN 100-240 VAC SL1250/BACnet/IP Ethernet with BUS communication (with binary input, relays, mA output) V0407MPHFN 14439.50
MS – TA-MC100 FSE V0407MPHMS 15649.50
MT – TA-MC100 FSR V0407MPHMT 15649.50
Nominal Size
inches
Actuator 5 HF
Code Supply Victaulic
Option Voltage Input Signal Options Part Code List Price
50 24 VAC/VDC SL1250/0(2)- 10 VDC, 0(4)-20 mA, 3-point, on-off V0507MPH50 $21398.50
E0 100-240 VAC SL1250/0(2)- 10 VDC, 0(4)-20 mA, 3-point, on-off V0507MPHE0 21713.00
6A 24 VAC/VDC SL1250/With binary input, relays, mA output V0507MPH6A 21649.50
FA 100-240 VAC SL1250/With binary input, relays, mA output V0507MPHFA 21964.00
6B 24 VAC/VDC SL1250/KNX-TP Twisted Pair with BUS communication (without binary input, relays, mA output) V0507MPH6B 21842.00
6C 24 VAC/VDC SL1250/Modbus/RTU RS 485 with BUS communication (without binary input, relays, mA output) V0507MPH6C 21884.00
6D 24 VAC/VDC SL1250/BACnet MS/TP RS 485 with BUS communication (without binary input, relays, mA output) V0507MPH6D 21873.50
6E 24 VAC/VDC SL1250/Modbus/TCP Ethernet with BUS communication (without binary input, relays, mA output) V0507MPH6E 21807.50
6F 24 VAC/VDC SL1250/KNX/IP Ethernet with BUS communication (without binary input, relays, mA output) V0507MPH6F 21807.50
6G 24 VAC/VDC SL1250/BACnet/IP Ethernet with BUS communication (without binary input, relays, mA output) V0507MPH6G 21807.50
FB 100-240 VAC SL1250/KNX-TP Twisted Pair with BUS communication (without binary input, relays, mA output) V0507MPHFB 22155.50
FC 100-240 VAC SL1250/Modbus/RTU RS 485 with BUS communication (without binary input, relays, mA output) V0507MPHFC 22198.00
FD 100-240 VAC SL1250/BACnet MS/TP RS 485 with BUS communication (without binary input, relays, mA output) V0507MPHFD 22185.50
FE 100-240 VAC SL1250/Modbus/TCP Ethernet with BUS communication (without binary input, relays, mA output) V0507MPHFE 22122.00
FF 100-240 VAC SL1250/KNX/IP Ethernet with BUS communication (without binary input, relays, mA output) V0507MPHFF 22122.00
FG 100-240 VAC SL1250/BACnet/IP Ethernet with BUS communication (without binary input, relays, mA output) V0507MPHFG 22122.00
6I 24 VAC/VDC SL1250/KNX-TP Twisted Pair with BUS communication (with binary input, relays, mA output) V0507MPH6I 21898.50
6J 24 VAC/VDC SL1250/Modbus/RTU RS 485 with BUS communication (with binary input, relays, mA output) V0507MPH6J 21928.50
6K 24 VAC/VDC SL1250/BACnet MS/TP RS 485 with BUS communication (with binary input, relays, mA output) V0507MPH6K 21928.50
6L 24 VAC/VDC SL1250/Modbus/TCP Ethernet with BUS communication (with binary input, relays, mA output) V0507MPH6L 21865.00
6M 24 VAC/VDC SL1250/KNX/IP Ethernet with BUS communication (with binary input, relays, mA output) V0507MPH6M 21865.00
6N 24 VAC/VDC SL1250/BACnet/IP Ethernet with BUS communication (with binary input, relays, mA output) V0507MPH6N 21865.00
FI 100-240 VAC SL1250/KNX-TP Twisted Pair with BUS communication (with binary input, relays, mA output) V0507MPHFI 22211.50
FJ 100-240 VAC SL1250/Modbus/RTU RS 485 with BUS communication (with binary input, relays, mA output) V0507MPHFJ 22243.00
FK 100-240 VAC SL1250/BACnet MS/TP RS 485 with BUS communication (with binary input, relays, mA output) V0507MPHFK 22243.00
FL 100-240 VAC SL1250/Modbus/TCP Ethernet with BUS communication (with binary input, relays, mA output) V0507MPHFL 22177.50
FM 100-240 VAC SL1250/KNX/IP Ethernet with BUS communication (with binary input, relays, mA output) V0507MPHFM 22177.50
FN 100-240 VAC SL1250/BACnet/IP Ethernet with BUS communication (with binary input, relays, mA output) V0507MPHFN 22177.50
MS – TA-MC100 FSE V0507MPHMS 23387.50
MT – TA-MC100 FSR V0507MPHMT 23387.50
Victaulic
Description Part Code List Price
TA MC253 SE Adapter for 6” Series 7MP P0607MPADP $441.50
TA MC253 SE 24VAC Actuator P0607FP00S 13286.00
TA MC253 SE 115VAC Actuator P0607MP01S 14614.00
Victaulic
Actuator Part Code List Price
TA M106 CO P00076W060 $620.00
TA SERIES 76W 6-WAY VALVE WITH TA M106 CO ACTUATOR
KOIL-KIT™ Coil
Pack Figure
String
Nominal Size Positions 18 Victaulic
inches Actuator Supply Voltage Input Signal Options * – 23 Part Code Price Each
M 24V AC/DC 3 point or on/off KDFDFM V0127FP00M $3716.00
N 115V AC 3 point or on/off KDFDFN V0127FP00N 4030.50
1Z\v P 24V AC/DC 0-10V; 4-20mA KDFDFP V0127FP00P 3716.00
Q 24V AC/DC 0-10V; 4-20mA; 3 point or on/off KDFDFQ V0127FP00Q 5057.00
R 115V AC 0-10V; 4-20mA; 3 point or on/off KDFDFR V0127FP00R 5367.50
M 24V AC/DC 3 point or on/off KEFEFM V0147FP00M 3837.00
N 115V AC 3 point or on/off KEFEFN V0147FP00N 4151.00
1Z\x P 24V AC/DC 0-10V; 4-20mA KEFEFP V0147FP00P 3837.00
Q 24V AC/DC 0-10V; 4-20mA; 3 point or on/off KEFEFQ V0147FP00Q 5178.00
R 115V AC 0-10V; 4-20mA; 3 point or on/off KEFEFR V0147FP00R 5488.50
M 24V AC/DC 3 point or on/off KFFFFM V0207FP00M 6827.00
N 115V AC 3 point or on/off KFFFFN V0207FP00N 7141.50
2 P 24V AC/DC 0-10V; 4-20mA KFFFFP V0207FP00P 6827.00
Q 24V AC/DC 0-10V; 4-20mA; 3 point or on/off KFFFFQ V0207FP00Q 8168.00
R 115V AC 0-10V; 4-20mA; 3 point or on/off KFFFFR V0207FP00R 8478.50
Q 24V AC/DC 0-10V; 4-20mA; 3 point or on/off – V0407FP00Q 18282.00
4
R 115V AC 0-10V; 4-20mA; 3 point or on/off – V0407FP00R 18592.00
KOIL-KIT™ Coil
Pack Figure
String
Nominal Size Positions 18 Victaulic
inches Actuator * Supply Voltage Input Signal Options – 24 Part Code Price Each
S 24V AC/DC 0-10V; 4-20mA; 3 point or on/off KDFDFS V0127FP00S $5551.00
1Z\v
T 24V AC/DC 0-10V; 4-20mA; 3 point or on/off KDFDFT V0127FP00T 5551.00
S 24V AC/DC 0-10V; 4-20mA; 3 point or on/off KEFEFS V0147FP00S 5672.00
1Z\x
T 24V AC/DC 0-10V; 4-20mA; 3 point or on/off KEFEFT V0147FP00T 5672.00
S 24V AC/DC 0-10V; 4-20mA; 3 point or on/off KFFFFS V0207FP00S 8662.00
2
T 24V AC/DC 0-10V; 4-20mA; 3 point or on/off KFFFFT V0207FP00T 8662.00
S 24V AC/DC 0-10V; 4-20mA; 3 point or on/off – V0407FP00S 18773.00
4
T 24V AC/DC 0-10V; 4-20mA; 3 point or on/off – V0407FP00T 18773.00
* “S” Actuator is an FSE Fail Close Valve (No Flow); “T” Actuator is an FSR Fail Open Valve (Full Flow).
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
* “S” Actuator is an FSE Fail Close Valve (No Flow); “T” Actuator is an FSR Fail Open Valve (Full Flow).
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
NOTE: P0247FCADP Adapter required for valves above 2”. Contact Victaulic for pricing and delivery.
Nominal Flow Without PT Ports and Handle Extensions With PT Ports and Handle Extensions
Range (GPM) Expected
Based on Control
Manual Valve Valve
Size (Publication Size
08.16) or (78U
Auto Cartridge Outlet
Flow Rates and Valve
Kit (Publication Nominal Size Victaulic Price Victaulic Price
Description 08.34) Kit Size Inlet) Reference Figure String Part Code Each Reference Figure String Part Code Each
0.6 – 2.8 Z\x Z\x K9YAFAF00000AFAM0MAMAF000 K00A799CK3 $442.50 K9YAFAF00000AFAM0MAMAF020 K000799G42 $601.50
2.0 – 6.0 C\v Z\x K9YBFBF00000BFAM0MAMBF000 K000799006 472.50 K9YBFBF00000BFAM0MAMBF020 K000799G43 631.50
78Y Fem x
Fem, 2.0 – 6.0 C\v C\v K9YBFBF00000BFBM0MBMBF000 K00A799CK4 472.50 K9YBFBF00000BFBM0MBMBF020 K000799H58 631.50
78U Fem x 3.9 – 10.0 1 Z\x K9YCFCF00000CFAM0MAMCF000 K000799010 665.50 K9YCFCF00000CFAM0MAMCF020 K000799I86 824.50
Male Union,
3.9 – 10.0 1 C\v K9YCFCF00000CFBM0MBMCF000 K000799207 665.50 K9YCFCF00000CFBM0MBMCF020 K000799G38 824.50
78KH Male
Union x Fem 3.9 – 10.0 1 1 K9YCFCF00000CFCM0MCMCF000 K000799114 665.50 K9YCFCF00000CFCM0MCMCF020 K000799L63 824.50
without 5.0 – 15.0 1Z\v 1Z\v K9YDFDF00000DFDM0MDMDF000 K00A799CK5 828.50 K9YDFDF00000DFDM0MDMDF020 K000799L64 987.50
hoses
6.6 – 20.0 1Z\x 1Z\x K9YEFEF00000EFEM0MEMEF000 K000799117 1166.00 K9YEFEF00000EFEM0MEMEF020 K000799R63 1325.00
12.6 – 36.0 2 2 K9YFFFF00000FFFM0MFMFF000 K000799116 1466.00 K9YFFFF00000FFFM0MFMFF020 K000799T12 1625.00
78Y Fem x 0.6 – 2.8 Z\x Z\x K9YAFAF0AEAEAFAM0MAMAF000 K000799296 608.50 K9YAFAF0AEAEAFAM0MAMAF020 K00A7995JP 767.50
Fem w/ 2’ 2.0 – 6.0 C\v Z\x K9YBFBF0BEBEBFAM0MAMBF000 K000799211 723.50 K9YBFBF0BEBEBFAM0MAMBF020 K00A7995JQ 882.50
Male x Male 2.0 – 6.0 C\v C\v K9YBFBF0BEBEBFBM0MBMBF000 K000799290 723.50 K9YBFBF0BEBEBFBM0MBMBF020 K00A7995JR 882.50
Union Hose,
78U Fem x 3.9 – 10.0 1 Z\x K9YCFCF0CECECFAM0MAMCF000 K000799435 1050.50 K9YCFCF0CECECFAM0MAMCF020 K00A7995JS 1209.50
Male Union 3.9 – 10.0 1 C\v K9YCFCF0CECECFBM0MBMCF000 K000799B10 1050.50 K9YCFCF0CECECFBM0MBMCF020 K00A7995JT 1209.50
w/ 2’ Male x 3.9 – 10.0 1 1 K9YCFCF0CECECFCM0MCMCF000 K000799I89 1050.50 K9YCFCF0CECECFCM0MCMCF020 K00A7995JU 1209.50
Male Union
Hose, 5.0 – 15.0 1Z\v 1Z\v K9YDFDF0DEDEDFDM0MDMDF000 K000799S39 1532.50 K9YDFDF0DEDEDFDM0MDMDF020 K00A7995JV 1691.50
78KH Male 6.6 – 20.0 1Z\x 1Z\x K9YEFEF0EEEEEFEM0MEMEF000 K000799AM5 2101.00 K9YEFEF0EEEEEFEM0MEMEF020 K00A7995JW 2260.00
Union x Fem 12.6 – 36.0 2 2 K9YFFFF0FEFEFFFM0MFMFF000 K000799P31 3124.00 K9YFFFF0FEFEFFFM0MFMFF020 K00A7995JX 3283.00
0.6 – 2.8 Z\x Z\x K9TAFAF00000AFAM0MAMAF000 K00A799DKA 406.50 K9TAFAF00000AFAM0MAMAF020 K00A7995JO 565.50
2.0 – 6.0 C\v Z\x K9TBFBF00000BFAM0MAMBF000 K000799085 435.00 K9TBFBF00000BFAM0MAMBF020 K000799O17 594.00
78T Fem x
Fem, 2.0 – 6.0 C\v C\v K9TBFBF00000BFBM0MBMBF000 K000799FAT 435.00 K9TBFBF00000BFBM0MBMBF020 K000799EV4 594.00
78U Fem x 3.9 – 10.0 1 Z\x K9TCFCF00000CFAM0MAMCF000 K000799683 605.00 K9TCFCF00000CFAM0MAMCF020 K000799O18 764.00
Male Union,
3.9 – 10.0 1 C\v K9TCFCF00000CFBM0MBMCF000 K000799N17 605.00 K9TCFCF00000CFBM0MBMCF020 K000799O22 764.00
78KH Male
Union x Fem 3.9 – 10.0 1 1 K9TCFCF00000CFCM0MCMCF000 K000799908 605.00 K9TCFCF00000CFCM0MCMCF020 K00A7995JY 764.00
without 5.0 – 15.0 1Z\v 1Z\v K9TDFDF00000DFDM0MDMDF000 K000799909 757.50 K9TDFDF00000DFDM0MDMDF020 K00A7995JZ 916.50
hoses
6.6 – 20.0 1Z\x 1Z\x K9TEFEF00000EFEM0MEMEF000 K00A799D27 1053.50 K9TEFEF00000EFEM0MEMEF020 K000799EW1 1212.50
12.6 – 36.0 2 2 K9TFFFF00000FFFM0MFMFF000 K000799910 1334.00 K9TFFFF00000FFFM0MFMFF020 K00A799AER 1493.00
78T Fem x 0.6 – 2.8 Z\x Z\x K9TAFAF0AEAEAFAM0MAMAF000 K000799531 572.50 K9TAFAF0AEAEAFAM0MAMAF020 K00A7995J0 731.50
Fem w/ 2’ 2.0 – 6.0 C\v Z\x K9TBFBF0BEBEBFAM0MAMBF000 K000799212 686.00 K9TBFBF0BEBEBFAM0MAMBF020 K000799I43 845.00
Male x Male 2.0 – 6.0 C\v C\v K9TBFBF0BEBEBFBM0MBMBF000 K000799205 686.00 K9TBFBF0BEBEBFBM0MBMBF020 K00A7995J2 845.00
Union Hose,
78U Fem x 3.9 – 10.0 1 Z\x K9TCFCF0CECECFAM0MAMCF000 K000799532 990.00 K9TCFCF0CECECFAM0MAMCF020 K00A7995J3 1149.00
Male Union 3.9 – 10.0 1 C\v K9TCFCF0CECECFBM0MBMCF000 K000799530 990.00 K9TCFCF0CECECFBM0MBMCF020 K000799G25 1149.00
w/ 2’ Male x 3.9 – 10.0 1 1 K9TCFCF0CECECFCM0MCMCF000 K000799AO4 990.00 K9TCFCF0CECECFCM0MCMCF020 K00A7995J4 1149.00
Male Union
Hose, 5.0 – 15.0 1Z\v 1Z\v K9TDFDF0DEDEDFDM0MDMDF000 K000799ET4 1461.50 K9TDFDF0DEDEDFDM0MDMDF020 K00A7995J5 1620.50
78KH Male 6.6 – 20.0 1Z\x 1Z\x K9TEFEF0EEEEEFEM0MEMEF000 K00A799A5J 1988.50 K9TEFEF0EEEEEFEM0MEMEF020 K00A7995J6 2147.50
Union x Fem 12.6 – 36.0 2 2 K9TFFFF0FEFEFFFM0MFMFF000 K00A799BJ1 2992.00 K9TFFFF0FEFEFFFM0MFMFF020 K00A7995J7 3151.00
MANUAL KOIL-KIT™ COIL PACK WITH TA SERIES 786 SWEAT GLOBE STYLE VALVES
MANUAL KOIL-KIT™ COIL PACK WITH SERIES 78BL QUARTER TURN BALANCING BALL VALVES
MANUAL KOIL-KIT™ COIL PACK WITH SERIES 78BL QUARTER TURN BALANCING BALL VALVES
AUTOMATIC KOIL-KIT™ COIL PACK WITH SERIES 76V AUTOMATIC UNION INLET BALANCING VALVE WITH CARTRIDGES
AUTOMATIC KOIL-KIT™ COIL PACK WITH SERIES 76V AUTOMATIC UNION INLET BALANCING VALVE WITH CARTRIDGES
Series 79D Koil-Kit™ Coil Pack with Style 925 Drain/Air Vent Assembly
Approx.
DRAIN/AIR VENT ASSEMBLY Size Wgt. Ea.
Refer to publication 08.35 Actual Outside
Nominal Size Diameter
inches inches lb Victaulic Part Code Price Each
2Z\x 2.875 6.1 K0249250E0 $124.50
3 3.500 7.4 K0309250E0 164.00
4 4.500 7.5 K0409250E0 209.00
6 6.625 11.6 K0609250E0 232.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Union Collar
Valve Size
Refer to publication 08.30 inches Victaulic Part Code Price Each
Z\x P00478Y204 $18.50
C\v – 1 P00678Y206 18.50
1Z\v – 1Z\x P01278Y212 45.50
2 P02078Y220 83.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Bypass Tee
Valve Size
Refer to publication 08.30 inches Victaulic Part Code Price Each
Z\x P004799500 $55.50
C\v P006799500 77.00
1 P010799500 121.00
1Z\v P012799500 327.50
1Z\x P014799500 327.50
2 P020799500 465.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Nominal
STRAINER/BALL VALVE Size Female x Female Sweat x Sweat
COMBINATION inches Victaulic Part Code Price Each Victaulic Part Code Price Each
Refer to publication 08.30 Z\x V00478YBFF $191.50 V00478YBSS $191.50
C\v V00678YBFF 200.00 V00678YBSS 200.00
1 V01078YBFF 312.50 V01078YBSS 312.50
1Z\v V01278YBFF 360.50 V01278YBSS 360.50
1Z\x V01478YBFF 561.50 V01478YBSS 561.50
2 V02078YBFF 659.00 V02078YBSS 659.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Nominal
BALL VALVE UNION Size Female x Female Sweat x Sweat
COMBINATION inches Victaulic Part Code Price Each Victaulic Part Code Price Each
Refer to publication 08.30 Z\x V00478TBFF $155.50 V00478TBSS $155.50
C\v V00678TBFF 162.50 V00678TBSS 162.50
1 V01078TBFF 252.00 V01078TBSS 252.00
1Z\v V01278TBFF 289.50 V01278TBSS 289.50
1Z\x V01478TBFF 449.00 V01478TBSS 449.00
2 V02078TBFF 527.00 V02078TBSS 527.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Nominal
UNION PORT FITTING Size Female x Male Union Sweat x Male Union
Refer to publication 08.30 inches Victaulic Part Code Price Each Victaulic Part Code Price Each
Z\x V00478UUFM $64.00 V00478UUSM $64.00
C\v V00678UUFM 70.00 V00678UUSM 70.00
1 V01078UUFM 98.50 V01078UUSM 98.50
1Z\v V01278UUFM 138.00 V01278UUSM 138.00
1Z\x V01478UUFM 155.00 V01478UUSM 155.00
2 V02078UUFM 243.50 V02078UUSM 243.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Replacement O-Rings
Approx.
STAP DIFFERENTIAL PRESSURE Size Wgt. Ea. Series 793 (Threaded)
CONTROLLER –
Actual Differential
THREADED END Outside Pressure
Refer to publication 08.29 Nominal Size Diameter Range Victaulic Part
inches inches lb psi Number IMI TA Code Price Each
Z\x 0.840 2.4 1.45 – 8.70 V004793CBV 52 266-015 $597.50
C\v 1.050 2.6 1.45 – 8.70 V006793CBV 52 266-020 606.50
1 1.315 2.9 1.45 – 8.70 V010793CBV 52 266-025 616.00
1Z\v 1.660 5.7 2.90 – 11.6 V012793CBV 52 266-032 798.00
1Z\x 1.900 6.4 2.90 – 11.6 V014793CBV 52 266-040 922.50
2 2.375 7.7 2.90 – 11.6 V020793CBV 52 266-050 1096.50
NOTE: Capillary tubes included but not connected.
TA Series 794 TA SERIES 794 DIFFERENTIAL PRESSURE CONTROLLER – SPRING OPTION 1 (2.9 – 11.6 PSI) DIFFERENTIAL PRESSURE RANGE
Approx.
STAP DIFFERENTIAL PRESSURE Size Wgt. Ea. Series 794 (Flanged)
CONTROLLER – Actual Differential
FLANGED END Outside Pressure
(CLASS 150, ASME/ANSI B16.42) Nominal Size Diameter Range Victaulic Part
inches inches lb psi Number IMI TA Code Price Each
Refer to publication 08.29
2Z\x 2.875 46.3 2.9 – 11.6 V024794116 52 266-065 $4427.50
3 3.500 52.9 2.9 – 11.6 V030794116 52 266-080 4669.50
4 4.500 72.8 2.9 – 11.6 V040794116 52 266-090 6266.00
TA SERIES 794 DIFFERENTIAL PRESSURE CONTROLLER – SPRING OPTION 2 (5.8 – 23.2) PSI DIFFERENTIAL PRESSURE RANGE
Approx.
Size Wgt. Ea. Series 794 (Flanged)
Actual Differential
Outside Pressure
Nominal Size Diameter Range Victaulic Part
inches inches lb psi Number IMI TA Code Price Each
2Z\x 2.875 46.3 5.8 – 23.2 V024794223 52-266-165 $4768.00
3 3.500 52.9 5.8 – 23.2 V030794223 52-266-180 5107.50
4 4.500 72.8 5.8 – 23.2 V040794223 52-266-190 6844.50
TA Series 7PR
TA Series 7PR TA SERIES 7PR DIFFERENTIAL PRESSURE CONTROLLER – 1 – 7 PSI; 4 – 21 PSI, OR 12 – 58 PSI DIFFERENTIAL PRESSURE RANGE
Approx.
DIFFERENTIAL PRESSURE Size Wgt. Ea. TA Series 7PR
CONTROLLER Actual Differential
Refer to publication 08.46 Outside Pressure
Nominal Size Diameter Range Victaulic
inches inches lb psi Part Number IMI TA Code Price Each
1–7 V0247PR007 23121 24 11065 $6709.50
2Z\x 2.875 39.7 4 – 21 V0247PR021 23121 24 21065 6709.50
12 – 58 V0247PR058 23121 24 31065 6709.50
1–7 V0307PR007 23121 24 11080 7380.00
3 3.500 46.3 4 – 21 V0307PR021 23121 24 21080 7380.00
12 – 58 V0307PR058 23121 24 31080 7380.00
1–7 V0407PR007 23121 24 11100 9403.50
4 4.500 70.5 4 – 21 V0407PR021 23121 24 21100 9403.50
12 – 58 V0407PR058 23121 24 31100 9403.50
1–7 V0507PR007 23121 24 11125 13476.00
5 5.563 92.6 4 – 21 V0507PR021 23121 24 21125 13476.00
12 – 58 V0507PR058 23121 24 31125 13476.00
1–7 V0607PR007 23121 24 11150 18452.00
6 6.625 123.5 4 – 21 V0607PR021 23121 24 21150 18452.00
12 – 58 V0607PR058 23121 24 31150 18452.00
1–7 V0807PR007 23121 24 11200 29562.00
8 8.625 183.0 4 – 21 V0807PR021 23121 24 21200 29562.00
12 – 58 V0807PR058 23121 24 31200 29460.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Approx. Wgt.
COMPACT DIFFERENTIAL Nominal Size Ea. Pressure Range Pressure Range Victaulic Part
inches lb psi kPA Number Price Each
PRESSURE CONTROLLER
Refer to publication 08.47 .73 – 4.35 5 – 30 V0047DAF03 $2072.50
1.45 – 8.70 10 – 60 V0047DAF06 2072.50
Z\x Female 4.2
1.45 – 14.5 10 – 100 V0047DAF10 2072.50
8.7 21.76 60 – 150 V0047DAF15 2072.50
.73 – 4.35 5 – 30 V0067DAF03 2177.50
1.45 – 8.70 10 – 60 V0067DAF06 2177.50
C\v Female 4.6
1.45 – 14.5 10 – 100 V0067DAF10 2177.50
8.7 – 21.76 60 – 150 V0067DAF15 2177.50
.73 – 4.35 5 – 30 V0107DAF03 2301.00
1.45 – 8.70 10 – 60 V0107DAF06 2301.00
1 Female 7.5
1.45 – 14.5 10 – 100 V0107DAF10 2301.00
8.7 21.76 60 – 150 V0107DAF15 2301.00
.73 – 4.35 5 – 30 V0127DAF03 2304.50
1.45 – 8.70 10 – 60 V0127DAF06 2304.50
1Z\v Female 7.9
1.45 – 14.5 10 – 100 V0127DAF10 2304.50
8.7 21.76 60 – 150 V0127DAF15 2304.50
.73 – 4.35 5 – 30 V0147DAF03 3025.00
1.45 – 8.70 10 – 60 V0147DAF06 3025.00
1Z\x Female 15.4
1.45 – 14.5 10 – 100 V0147DAF10 3025.00
8.7 – 21.76 60 – 150 V0147DAF15 3025.00
.73 – 4.35 5 – 30 V0207DAF03 3365.00
1.45 – 8.70 10 – 60 V0207DAF06 3365.00
2 Female 16.3
1.45 – 14.5 10 – 100 V0207DAF10 3365.00
8.7 – 21.76 60 – 150 V0207DAF15 3365.00
Female NPT ends both sides
With .25” tubing
With .25” to G Z\, body adapter
With .25” tubing adapter to G Z\zn thread nipple
With transition nipple (G Z\zn to drain kit connector)
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
TA SERIES 793 DIFFERENTIAL PRESSURE CONTROL VALVE & TA SERIES 787H BALANCING VALVE WITH DRAIN KIT
TA SERIES 7DA COMPACT DIFFERENTIAL PRESSURE VALVE & TA SERIES 787H BALANCING VALVE WITH DRAIN KIT
Setting Tool
Instruments
Dongle for Slider DONGLE FOR SLIDER ACTUATORS 7CP AND 7MP
Victaulic
Actuators 7CP and Part Code List Price
7MP P0007MPDON $534.50
Refer to publication 08.16
Victaulic IMI TA
Conversion Kit Part Code Code List Price
K000738100 mco $777.00 NR
† The kit includes 2 probes, necessary fittings, flow wheel and instruction sheet.
NR
Non-returnable
Victaulic IMI TA
SCOPE BALANCING Description Part Code Code List Price
INSTRUMENT TA-SCOPE Premium V000734000 52-199-014 $26802.50
Refer to publication 08.16 TA-SCOPE HP Premium V000734001 52-199-114 +
TA-SCOPE V000734002 52-199-214 10841.50
TA-SCOPE HP V000734003 52-199-314 +
+ Quoted on application. Contact Victaulic for pricing and availability.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Pressure
Range Victaulic IMI TA
Description Version psi Part Code Code List Price
Standard 0 – 72.5 P000DPS001 52-199-971 $5206.50 NR
DP Sensor Unit (DpS-Visio)
High Pressure (HP) 0 – 145.0 P000DPS002 52-199-972 6185.00
NR
Non-returnable
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
SAFETY PRESSURE PROBE, SAFETY PRESSURE AND TEMPERATURE PROBE AND DIGITAL TEMPERATURE SENSOR
Victaulic IMI TA
Description Part Code Code List Price
Safety Pressure Probe (SPP)
P000734005 52-199-951 $1053.00
(For use with Measuring Hoses and Extended Hoses)
Safety Pressure and Temperature Probe (SPTP)
P000734004 52-199-952 2520.00
(For use with Measuring Hoses and Extended Hoses)
Digital Temperature Sensor (DTS) P000734006 52-199-941 +
+ Quoted on application. Contact Victaulic for pricing and availability.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
MEASURING NIPPLE
MEASURING NEEDLE
Victaulic IMI TA
Description Part Code Code List Price
Measuring Needle (Angle) P000738100 307-635-62 $273.50 NR
NR
Non-returnable
CHUCKS
Victaulic IMI TA
Description Color Part Code Code List Price
Red P000734015 309-748-60 $197.50
Chucks (For older valves and TA-BVS)
Blue P000734016 309-748-61 197.50
FILTER
Victaulic IMI TA
Description Part Code Code List Price
P000734012 309-206-01 +
Filter (Spare part to measuring hoses)
P000734020 311-062-62 +
+ Quoted on application. Contact Victaulic for pricing and availability.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
DC CABLE
Victaulic IMI TA
Description For Device Part Code Code List Price
DC Cable
DpS-Visio P000734018 311-040-01 +
(To connect a device to the multi-charger)
+ Quoted on application. Contact Victaulic for pricing and availability.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Plain End
Couplings and
Fittings
COUPLING COMPLETE †
Coupling PIPE Approx. With Grade “E” Plated
inches Wgt. Ea. or “T” Gasket Bolt & Nut
STYLE 99 Price Each
Nominal Outside Size
Refer to publication 14.02 Size Diameter lb Painted Galv. inches
1 1.315 1.7 $284.00 $366.00 C\, x 2
1Z\x 1.900 3.6 284.00 366.00 Z\x x 2Z\x
2 2.375 5.3 284.00 366.00 B\, x 3Z\v
2Z\x 2.875 5.7 284.00 366.00 B\, x 3Z\v
3 3.500 8.7 414.00 541.00 C\v x 4Z\v
3Z\x 4.000 10.6 479.00 633.00 C\v x 4Z\v
4 4.500 12.8 479.00 634.50 C\v x 4Z\v
5 5.563 17.3 678.50 902.50 M\, x 5
6 6.625 23.2 828.50 1123.00 1 x 6
8 8.625 37.2 1460.00 1952.00 M\, x 5
10 10.750 48.2 1894.00 2542.50 M\, x 5
12 12.750 60.0 2377.00 3276.50 1 x 6Z\x
14 14.000 89.0 3262.50 4233.50 1 x 6Z\x
16 16.000 105.0 4461.50 5694.50 1 x 6Z\x
18 18.000 122.4 5951.50 7723.50 1 x 6Z\x
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
† Surcharge for couplings supplied without gasket. Contact Victaulic for pricing.
Adapter Nipples ADAPTER NIPPLES – PLAIN TO THREADED, PLAIN TO BEVELED, OR PLAIN TO GROOVED
Plain End Fittings PLAIN END FITTINGS – 90° ELBOW OR 45° ELBOW
Nominal Cross
Size No. 35-P
Approx. Price Each
Weight Each
inches lb Painted Galv.
No. 35-P 1 1.7 + +
1Z\x 3.5 + +
2 5.2 + +
2Z\x 5.4 + +
3 8.5 + +
3Z\x 9.0 + +
4 10.8 + +
5 20.0 + +
6 30.0 + +
8 66.4 + +
10 103.0 + +
12 158.0 + +
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
Reducing Tees, True Ys, Crosses and Laterals are segmentally welded steel.
Approx. Approx.
NO. 53-P Nominal Size Wgt. Each Price Each Nominal Size Wgt. Each Price Each
inches lb Electroplated inches lb Electroplated
Refer to publication 14.04
1Z\x x 1 1.2 + 6 x 1 17.0 +
2 x 1 2.0 + 1Z\x 16.0 +
1Z\x 2.0 + 2 16.0 +
No. 53-P 2Z\x x 1 3.0 + 2Z\x 17.0 +
1Z\x 3.0 + 3 17.0 +
2 3.0 + 3Z\x 17.0 +
3 x 1 4.5 + 4 17.0 +
1Z\x 4.5 + 5 17.5 +
2 4.5 + 8 x 3 29.0 +
2Z\x 4.5 + 4 29.0 +
3Z\x x 3 6.8 + 5 29.0 +
4 x 1 7.5 + 6 29.0 +
1Z\x 7.5 + 10 x 3 1.2 +
2 7.5 + 4 2.0 +
2Z\x 7.5 + 6 2.0 +
3 7.5 + 8 3.0 +
3Z\x 7.5 + 12 x 6 3.0 +
5 x 2 11.5 + 8 3.0 +
3 11.5 + 10 4.5 +
4 11.5 +
Reducing Tee
NO. 25-P Nominal Size No. 25-P
Refer to publication 14.04 Approx. Price Each
inches Wgt. Each
Run x Branch lb Painted Galv.
1Z\x x 1Z\x x 1 2.2 + +
2 x 2 x 1 2.9 + +
1Z\x 3.1 + +
No. 25-P 3 x 3 x 1 6.7 + +
1Z\x 6.9 $577.00 $709.00
2 7.1 + 1340.00
4 x 4 x 1 10.9 + +
1Z\x 11.1 + +
2 11.3 835.00 +
2Z\x 11.6 858.50 +
3 11.9 858.50 +
6 x 6 x 2 24.7 + +
3 25.4 1460.00 +
4 26.2 + 1877.50
8 x 8 x 2 42.0 + +
3 44.0 + +
4 46.0 + +
5 48.0 + +
6 50.0 1944.00 +
10 x 10 x 4 74.0 + +
6 78.0 + +
8 86.0 + +
12 x 12 x 6 112.0 + +
8 118.0 + +
10 130.0 + +
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
Reducing Tees, True Ys, Crosses and Laterals are segmentally welded steel.
COUPLING COMPLETE †
Coupling PIPE Approx. Wgt. Ea. With Grade “EHP” or “T” Gasket
inches Price Each
STYLE P07
Nom. Outside
Refer to publication 34.01 Size Dia. lb Painted DIFF ZN*
Z\x 0.840 1.2 $12.50 $15.00
C\v 1.050 1.3 14.00 17.00
1 1.315 1.4 15.50 19.00
1Z\v 1.660 1.6 20.50 24.50
1Z\x 1.900 2.5 37.00 44.00
2 2.375 3.1 46.00 55.50
† Surcharge for couplings supplied without gasket. Contact Victaulic for pricing.
*DIFF ZN = Thermally diffused zinc-based coating
Installation-Ready™ STYLE P08 INSTALLATION-READY™ SLIP COUPLING – GRADE “EHP” OR “T” GASKET
COUPLING COMPLETE †
Slip Coupling PIPE Approx. Wgt. Ea. With Grade “EHP” or “T” Gasket
inches Price Each
STYLE P08
Nom. Outside
Refer to publication 34.01 Size Dia. lb Painted DIFF ZN*
Z\x 0.840 1.1 $14.00 $17.00
C\v 1.050 1.2 17.00 20.50
1 1.315 1.4 18.50 22.00
1Z\v 1.660 1.6 22.00 26.50
1Z\x 1.900 2.4 39.50 47.50
2 2.375 3.0 52.00 63.00
† Surcharge for couplings supplied without gasket. Contact Victaulic for pricing.
*DIFF ZN = Thermally diffused zinc-based coating
Installation-Ready™ STYLE P50 INSTALLATION-READY™ REDUCING COUPLING – GRADE “EHP” OR “T” GASKET
COUPLING COMPLETE †
Reducing Coupling PIPE Approx. Wgt. Ea. With Grade “EHP” or “T” Gasket
inches Price Each
STYLE P50
Nom.
Refer to publication 34.01 Size lb Painted DIFF ZN*
C\v x Z\x 1.7 $23.50 $28.50
1 x C\v 1.9 30.00 36.50
C\v 2.6 38.50 46.00
1Z\v x
1 2.3 41.00 49.00
C\v 3.1 50.50 60.50
1Z\x x 1 3.0 52.50 63.50
1Z\v 3.0 54.50 65.00
1 3.8 73.00 87.00
2 x 1Z\v 3.8 72.50 88.00
1Z\x 4.1 75.50 90.50
† Surcharge for couplings supplied without gasket. Contact Victaulic for pricing.
*DIFF ZN = Thermally diffused zinc-based coating
Installation-Ready™ NO. P10 INSTALLATION-READY™ 90° ELBOW – GRADE “EHP” OR “T” GASKET
FITTING COMPLETE †
90° Elbow PIPE Approx. Wgt. Ea. With Grade “EHP” or “T” Gasket
inches Price Each
NO. P10
Nom. Outside
Refer to publication 34.01 Size Dia. lb Painted DIFF ZN*
Z\x 0.840 1.8 $15.00 $18.50
C\v 1.050 2.1 17.00 20.50
1 1.315 2.4 21.50 25.50
1Z\v 1.660 2.8 37.50 45.00
1Z\x 1.900 3.4 56.00 67.00
2 2.375 5.8 80.50 96.50
† Surcharge for fittings supplied without gasket. Contact Victaulic for pricing.
*DIFF ZN = Thermally diffused zinc-based coating
Installation-Ready™ NO. P11 INSTALLATION-READY™ 45° ELBOW – GRADE “EHP” OR “T” GASKET
FITTING COMPLETE †
45° Elbow PIPE Approx. Wgt. Ea. With Grade “EHP” or “T” Gasket
inches Price Each
NO. P11
Nom. Outside
Refer to publication 34.01 Size Dia. lb Painted DIFF ZN*
Z\x 0.840 0.7 $15.50 $17.00
C\v 1.050 2.4 17.50 19.50
1 1.315 2.7 26.50 29.50
1Z\v 1.660 3.2 33.50 37.50
1Z\x 1.900 3.7 55.00 60.50
2 2.375 5.4 75.50 83.00
† Surcharge for fittings supplied without gasket. Contact Victaulic for pricing.
*DIFF ZN = Thermally diffused zinc-based coating
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
FITTING COMPLETE †
Tee PIPE Approx. Wgt. Ea. With Grade “EHP” or “T” Gasket
inches Price Each
NO. P20
Nom. Outside
Refer to publication 34.01 Size Dia. lb Painted DIFF ZN*
Z\x 0.840 2.4 $19.50 $23.50
C\v 1.050 2.8 25.00 30.00
1 1.315 3.2 30.50 36.50
1Z\v 1.660 3.7 47.50 57.00
1Z\x 1.900 4.6 84.50 101.50
2 2.375 7.0 110.50 132.50
† Surcharge for fittings supplied without gasket. Contact Victaulic for pricing.
*DIFF ZN = Thermally diffused zinc-based coating
Installation-Ready™ NO. P25 INSTALLATION-READY™ REDUCING TEE – GRADE “EHP” OR “T” GASKET
FITTING COMPLETE †
Reducing Tee Size Approx. With Grade “EHP” or “T” Gasket
inches Wgt. Each Price Each
NO. P25
Run x Branch lb Painted DIFF ZN*
Refer to publication 34.01
C\v x C\v x Z\x 2.9 $49.00 $58.50
1 x 1 x Z\x 3.1 57.50 65.00
C\v 3.3 59.50 65.00
1Z\v x 1Z\v x Z\x 3.4 65.00 70.00
C\v 4.0 59.50 71.50
1 4.2 61.00 131.50
1Z\x x 1Z\x x Z\x 4.4 70.00 78.50
C\v 4.6 67.50 90.50
1 4.8 75.50 81.00
1Z\v 5.3 80.00 86.00
2 x 2 x Z\x 6.4 72.00 93.50
C\v 7.0 110.00 73.50
1 7.5 112.00 134.00
1Z\v 7.4 99.00 98.00
1Z\x 8.2 106.00 108.50
† Surcharge for fittings supplied without gasket. Contact Victaulic for pricing.
*DIFF ZN = Thermally diffused zinc-based coating
PIPE
NO. P60 inches Approx. Wgt. Ea. Price Each
Refer to publication 34.01 Nom. Outside Sold in Box
Size Dia. lb Painted Quantities of
Z\x 0.840 0.4 $29.00 6
C\v 1.050 0.5 29.50 4
1 1.315 0.7 33.50 4
1Z\v 1.660 0.9 36.00 2
1Z\x 1.900 1.3 39.00 2
2 2.375 1.7 44.00 2
PIPE
Rings inches Sold in Bag Quantities of 50
Refer to publication 34.01 Nom. Outside
Size Dia. Price Per Bag
Z\x 0.840 $132.50
C\v 1.050 159.00
1 1.315 159.00
1Z\v 1.660 212.00
1Z\x 1.900 371.00
2 2.375 477.00
Threaded Adapter NO. P40 THREADED ADAPTER (MALE NPT X PLAIN END)
Threaded Adapter NO. P80 THREADED ADAPTER (FEMALE NPT X PLAIN END)
Straight Dielectric NO. P47 STRAIGHT DIELECTRIC ADAPTER (PLAIN END X SWEAT)
90° Elbow Dielectric NO. P97 90° ELBOW DIELECTRIC ADAPTER (PLAIN END X SWEAT)
Cut and Mark Tool The PC3110 Cut and Mark Tool cuts and marks the pipe simultaneously, leaving two knurled markings
on each piece that clearly display proper insertion depth. Refer to Section 17 – Pipe Preparation Tools for
PC3110
prices and where to call for purchase information.
Refer to publication 34.01
Vic-Press™ System
for Schedule 10S
Stainless Steel Pipe
The Vic-Press™ Schedule 10S System requires no flame or arc as with welding, and
no cutting oil, chips or preparation time as with threading or flanging. Off-the-shelf
standard ASTM A312 Schedule 10S stainless steel pipe is cut to size, inserted into
the coupling and the coupling or fitting is pressed onto the pipe in seconds.
The Vic-Press™ Schedule 10S System meets the hanging requirements of ASME
B31.1, B31.3 and B31.9.
Vic-Press™ Schedule 10S Type 304 couplings and fittings are ANSI/NSF 61 Annex
G Certified for cold (+86°F/+30°C) and hot (+180°F/+82°C) potable water service for
Grade H and Grade E seal materials. Unless specified otherwise, Grade “H” seals
will be applied. FM Approved to 175 psi/1200 kPa service for above ground sprinkler
systems.
For information pertaining to gasket seals for couplings, seals for Vic-Press™
products, O-rings for Victaulic® Bolted Split Sleeve products and general definition/
seal material Selection, refer to publication 05.01.
For specific chemical and temperature compatibility, refer to the
Gasket Chemical Services Guide Long Report (GSG-100).
WARNING
• Before attempting to install any Vic-Press™ Schedule 10S System products,
carefully read and fully understand the “Vic-Press™ Schedule 10S Products
Installation Instructions” (I-P500) and the operating and maintenance manual
supplied with the tool.
Failure to follow these instructions could result in serious personal injury, property
damage, product damage, joint leakage, and/or joint failure.
Nominal
LOOSE SEALS Size Price Each †
Refer to publication 18.12 Standard Grade “H” HNBR or Optional Grade “O”
inches Grade “E” EPDM Seal Fluoroelastomer Seal
Z\x $12.50 NR $34.50
C\v 13.50 NR 39.00
1 17.00 NR 44.00
1Z\x 21.50 NR 87.50
2 30.00 NR 114.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
† Specify choice clearly on order.
NR
Non-returnable
Style P597 STYLE P597 – WITH STANDARD GRADE “H” HNBR SEAL OR OPTIONAL GRADE “E” SEAL
Approx.
STANDARD COUPLING Nominal Weight
Size Each Price Each †
(P X P) Standard Grade “H”
Refer to publication 18.12 HNBR or Grade “E” Optional Grade “O”
inches lb EPDM Seal Fluoroelastomer Seal
Z\x 0.2 $73.50 $99.00
C\v 0.3 81.00 111.00
1 0.5 91.00 119.50
1Z\x 0.7 121.00 205.00
2 1.0 159.00 268.50
† Specify choice clearly on order.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Style P596 STYLE P596 – WITH STANDARD GRADE “H” HNBR SEAL OR OPTIONAL GRADE “E” SEAL
Approx.
MALE ADAPTER – THREADED Nominal Weight
Size Each Price Each †
(P X M) Standard Grade “H”
Refer to publication 18.12 HNBR or Grade “E” EPDM Optional Grade “O”
inches lb Seal Fluoroelastomer Seal
Z\x x Z\x 0.3 $136.00 $149.00
C\v x Z\x 0.4 141.00 155.00
C\v 0.4 141.00 157.50
1 0.5 163.50 183.50
1 x C\v 0.5 167.50 183.50
1 0.6 167.50 186.50
1Z\x x C\v 0.8 311.00 326.00
1Z\x 1.0 278.00 369.50
2 x 2 1.4 342.50 418.50
† Specify choice clearly on order.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Series P569 For Series P569 pricing, please refer to Series P569 in the Type 316 section.
PxP
PxG
GxG
Series P589 SERIES P589 – VIC-PRESS™ SCHEDULE 10S ENDS WITH STANDARD GRADE “H” HNBR SEAL OR OPTIONAL GRADE “E” SEAL
Nominal Approx.
VIC-PRESS™ SCHEDULE 10S Size Weight Each Price Each †
SYSTEM BRASS BODY BALL Standard Grade “H”
VALVE HNBR or Grade “E” Optional Grade “O”
inches lb EPDM Seal Fluoroelastomer Seal
Stainless Steel Vic-Press™ Type Z\x 1.0 $426.00 $452.00
304 Schedule 10S Ends C\v 1.6 467.50 499.00
Refer to publication 18.12 1 2.8 560.00 599.00
1Z\x 4.7 784.50 898.50
2 6.9 960.50 1106.50
† Specify choice clearly on order.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Style P586 STYLE P586 – WITH STANDARD GRADE “H” HNBR SEAL OR OPTIONAL GRADE “E” SEAL
Approx.
90° ELBOW – SHORT TANGENT Nominal Weight
Size Each Price Each †
(P X P) Standard Grade “H”
Refer to publication 18.12 HNBR or Grade “E” Optional Grade “O”
inches lb EPDM Seal Fluoroelastomer Seal
Z\x 0.3 $135.50 $161.50
C\v 0.4 152.50 183.50
1 0.8 181.00 219.50
1Z\x 1.4 355.00 469.50
2 2.0 453.50 599.50
† Specify choice clearly on order.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Style P542 STYLE P542 – WITH STANDARD GRADE “H” HNBR SEAL OR OPTIONAL GRADE “E” SEAL
Approx.
90° STREET ELBOW Nominal Weight
Size Each Price Each †
(P X T) Standard Grade “H”
Refer to publication 18.12 HNBR or Grade “E” Optional Grade “O”
inches lb EPDM Seal Fluoroelastomer Seal
Z\x 0.3 $135.50 $147.50
C\v 0.4 152.50 168.50
1 0.7 181.00 199.00
1Z\x 1.4 355.00 412.00
2 2.0 453.50 525.50
† Specify choice clearly on order.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Style P591 STYLE P591 – WITH STANDARD GRADE “H” HNBR SEAL OR OPTIONAL GRADE “E” SEAL
Nominal Approx.
45° ELBOW Size Weight Each Price Each †
Standard Grade “H”
(P X P) HNBR or Grade “E” Optional Grade “O”
Refer to publication 18.12 inches lb EPDM Seal Fluoroelastomer Seal
Z\x 0.2 $120.50 $146.50
C\v 0.4 133.50 163.50
1 0.8 158.50 197.00
1Z\x 1.7 309.00 424.00
2 2.5 395.50 542.50
† Specify choice clearly on order.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Style P543 STYLE P543 – WITH STANDARD GRADE “H” HNBR SEAL OR OPTIONAL GRADE “E” SEAL
Nominal Approx.
45° STREET ELBOW Size Weight Each Price Each †
Standard Grade “H”
(P X T) HNBR or Grade “E” Optional Grade “O”
Refer to publication 18.12 inches lb EPDM Seal Fluoroelastomer Seal
Z\x 0.2 $120.50 $134.50
C\v 0.4 133.50 147.50
1 0.8 158.50 177.50
1Z\x 1.7 309.00 366.00
2 2.5 395.50 469.50
† Specify choice clearly on order.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Style P592 STYLE P592 – WITH STANDARD GRADE “H” HNBR SEAL OR OPTIONAL GRADE “E” SEAL
Approx.
TEE Nominal Weight
Size Each Price Each †
(P X P X P) Standard Grade “H”
Refer to publication 18.12 HNBR or Grade “E” Optional Grade “O”
inches lb EPDM Seal Fluoroelastomer Seal
Z\x 0.4 $244.50 $284.50
C\v 0.5 269.50 316.50
1 0.9 288.50 347.00
1Z\x 1.5 369.00 540.50
2 2.1 458.00 678.50
† Specify choice clearly on order.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Style P593 STYLE P593 – WITH STANDARD GRADE “H” HNBR SEAL OR OPTIONAL GRADE “E” SEAL
Approx.
TEE – REDUCING BRANCH Nominal Weight
Size Each Price Each †
(P X P X P) Standard Grade “H”
Refer to publication 18.12 HNBR or Grade “E” Optional Grade “O”
inches lb EPDM Seal Fluoroelastomer Seal
C\v x C\v x Z\x 0.5 $271.50 $316.50
1 x 1 x Z\x 0.8 280.50 333.00
C\v 0.8 287.50 342.00
1Z\x x 1Z\x x Z\x 1.2 338.50 465.00
C\v 1.3 342.00 471.50
1 1.4 343.50 476.50
2 x 2 x Z\x 1.7 440.00 599.50
C\v 1.7 447.00 +
1 1.8 459.00 +
1Z\x 2.0 506.00 710.50
† Specify choice clearly on order.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
Style P588 STYLE P588 – WITH STANDARD GRADE “H” HNBR SEAL OR OPTIONAL GRADE “E” SEAL
Approx.
TEE – REDUCING BRANCH – Nominal Weight
Size Each Price Each †
THREADED
Standard Grade “H”
(P X P X F) HNBR or Grade “E” Optional Grade “O”
inches lb EPDM Seal Fluoroelastomer Seal
Refer to publication 18.12
Z\x x Z\x x Z\x 0.4 $369.00 $394.50
C\v x C\v x Z\x 0.5 399.50 429.50
C\v 0.6 403.00 434.50
1 x 1 x Z\x 0.9 406.00 445.50
C\v 0.9 407.50 447.00
1 1.1 442.50 481.50
1Z\x x 1Z\x x Z\x 1.4 459.00 575.00
C\v 1.5 464.50 578.50
1 1.5 507.00 622.00
2 x 2 x Z\x 1.7 524.00 670.50
C\v 1.7 528.50 +
1 2.0 567.00 +
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
† Specify choice clearly on order.
+ Quoted on application. Contact Victaulic for pricing and availability.
Style P594 STYLE P594 – WITH STANDARD GRADE “H” HNBR SEAL OR OPTIONAL GRADE “E” SEAL
Approx.
CONCENTRIC REDUCER Nominal Weight
Size Each Price Each †
(P X P) Standard Grade “H”
Refer to publication 18.12 HNBR or Grade “E” EPDM Optional Grade “O”
inches lb Seal Fluoroelastomer Seal
C\v x Z\x 0.5 $221.50 $250.50
1 x Z\x 0.6 297.50 331.00
C\v 0.7 237.00 271.00
1Z\x x Z\x 0.9 417.50 486.50
C\v 1.0 391.50 464.00
1 1.1 218.50 295.50
2 x Z\x 1.2 772.50 859.00
C\v 1.3 349.00 438.50
1 1.4 269.50 363.00
1Z\x 1.6 269.50 400.50
† Specify choice clearly on order.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Style P595 STYLE P595 – WITH STANDARD GRADE “H” HNBR SEAL OR OPTIONAL GRADE “E” SEAL
Nominal Approx.
FLANGE ADAPTER Size Weight Each Price Each †
Standard Grade “H”
(P X L) HNBR or Grade “E” Optional Grade “O”
Refer to publication 18.12 inches lb EPDM Seal Fluoroelastomer Seal
Z\x 2.2 $992.00 $1006.00
C\v 2.3 1021.50 1037.00
1 2.8 1037.00 1057.00
1Z\x 3.6 1263.00 1320.50
2 5.8 1406.50 1479.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
† Specify choice clearly on order.
Style P565 STYLE P565 – WITH STANDARD GRADE “H” HNBR SEAL OR OPTIONAL GRADE “E” SEAL
Approx.
FLANGE ADAPTER Nominal Weight
Size Each Price Each †
(VAN STONE TYPE)
Standard Grade “H”
(P X L) HNBR or Grade “E” Optional Grade “O”
inches lb EPDM Seal Fluoroelastomer Seal
Refer to publication 18.12
Z\x 2.4 $347.50 $361.50
C\v 2.5 347.50 364.00
1 3.0 467.50 488.00
1Z\x 4.1 515.00 572.00
2 6.8 552.50 626.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
† Specify choice clearly on order.
Approx.
TRANSITION NIPPLE Nominal Weight
Size Each Unit End to End Price
(T X G) inches lb Inches Each
Refer to publication 18.12 C\v 0.3 4 $184.00
1 0.5 4 190.50
1Z\x 0.7 4 238.00
2 0.9 4 249.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Style P584 STYLE P584 – WITH STANDARD GRADE “H” HNBR SEAL OR OPTIONAL GRADE “E” SEAL
Nominal Approx.
THREADED UNION ** Size Weight Each Price Each †
Standard Grade “H”
(P X P) HNBR or Grade “E” Optional Grade “O”
Refer to publication 18.12 inches lb EPDM Seal Fluoroelastomer Seal
Z\x 3.0 $815.00 $841.00
C\v 3.7 925.50 956.50
1 4.3 1126.00 1164.50
1Z\x 6.0 1924.00 2037.50
2 6.8 2371.00 2518.50
** Grooved End Union - A grooved end union can be formed with two Style P587 (Type 304 stainless) transition nipples (see
previous page) and a variety of grooved end couplings equipped with varied gasket materials to meet service requirements. For
standard ductile iron couplings, stainless steel couplings and gaskets refer to the Stainless Steel Products section.
† Specify choice clearly on order.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Style P599 STYLE P599 – WITH STANDARD GRADE “H” HNBR SEAL OR OPTIONAL GRADE “E” SEAL
Approx.
FEMALE ADAPTER – THREADED Nominal Weight
Size Each Price Each †
(P X F) Standard Grade “H”
Refer to publication 18.12 HNBR or Grade “E” EPDM Optional Grade “O”
inches lb Seal Fluoroelastomer Seal
Z\x x Z\x 0.3 $166.00 $178.00
C\v x Z\x 0.3 166.50 182.50
C\v 0.4 169.50 185.00
1 x Z\x 0.7 178.50 199.00
C\v 0.6 191.00 210.00
1 0.6 202.50 223.00
1Z\x x 1 1.0 319.00 378.00
1Z\v 0.8 360.00 +
1Z\x 1.0 400.50 458.00
2 x 1Z\v 1.1 467.00 +
1Z\x 1.3 394.50 471.00
2 1.2 434.50 510.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
† Specify choice clearly on order.
+ Quoted on application. Contact Victaulic for pricing and availability.
Style P561 STYLE P561 – WITH STANDARD GRADE “H” HNBR SEAL OR OPTIONAL GRADE “E” SEAL
Nominal Approx.
WELD ADAPTER Size Weight Each Price Each †
Standard Grade “H”
(P X W) HNBR or Grade “E” Optional Grade “O”
Refer to publication 18.12 inches lb EPDM Seal Fluoroelastomer Seal
Z\x 0.3 $132.50 $145.00
C\v 0.4 137.00 152.00
1 0.6 162.00 181.00
1Z\x 0.9 280.50 334.50
2 1.4 332.00 401.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
† Specify choice clearly on order.
Nominal Approx.
END CAP Size Weight Each Price
Refer to publication 18.12 inches lb Each
Z\x 0.1 $169.00
C\v 0.1 186.50
1 0.3 199.00
1Z\x 0.4 254.50
2 0.5 316.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
PFT510 The Vic-Press™ Schedule 10S System requires a tool specifically designed for products on off-the-shelf
standard ASTM A312 Schedule 10S stainless steel pipe. Refer to Pipe Preparation Tools section for prices
Vic-Press™ Tool and where to call for purchase information.
NOTE: Victaulic Tool Discount will apply.
PFT510 Tool
The Vic-Press™ Schedule 10S System eliminates the need for flame as in welding, no
cutting oil, chips or preparation time as with threading or flanging. Off-the-shelf stan-
dard ASTM A312 Schedule 10S stainless steel pipe is cut to size, inserted into the
coupling and the coupling is pressed onto the pipe and fitting in seconds.
The Vic-Press™ Schedule 10S System meets the hanging requirements of ASME
B31.1, B31.3 and B31.9.
Vic-Press™ Type 316 couplings and fittings are recommended for varying concentra-
tions of hot petroleum/water mixtures, hydrocarbons, air with oil vapors, vegetable
and mineral oils, as well as automotive fluids such as engine oil and transmis-
sion fluid within the temperature range of –20°F to +210°F/–29°C to +98°C. UL
Classified in accordance with ANSI/NSF 61 Annex G for cold (+86°F/+30°C) and hot
(+180°F/+82°C) potable water service for Grade H and Grade E seal materials. Unless
specified otherwise, Grade “H” seals will be applied. FM Approved to 175 psi/1200
kPa service for above ground sprinkler systems.
For information pertaining to gasket seals for couplings, seals for Vic-Press™
products, O-rings for Victaulic® Bolted Split Sleeve products and general definition/
seal material Selection, refer to publication 05.01.
For specific chemical and temperature compatibility, refer to the
Gasket Chemical Services Guide Long Report (GSG-100).
WARNING
• Before attempting to install any Vic-Press™ Schedule 10S System products,
carefully read and fully understand the “Vic-Press™ Schedule 10S Products
Installation Instructions” (I-P500) and the operating and maintenance manual
supplied with the tool.
Failure to follow these instructions could result in serious personal injury, property
damage, product damage, joint leakage, and/or joint failure.
Nominal
LOOSE SEALS Size Price Each †
Refer to publication 18.11 Standard Grade “H” HNBR or Optional Grade “O”
inches Grade “E” EPDM Seal Fluoroelastomer Seal
Z\x $12.50 NR $34.50
C\v 13.50 NR 39.00
1 17.00 NR 44.00
1Z\x 21.50 NR 87.50
2 30.00 NR 114.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
† Specify choice clearly on order.
NR
Non-returnable
Style P507 STYLE P507 – WITH STANDARD GRADE “H” HNBR SEAL OR OPTIONAL GRADE “E” SEAL
Nominal Approx.
STANDARD COUPLING Size Weight Each Price Each †
Standard Grade “H”
(P X P) HNBR or Grade “E” Optional Grade “O”
Refer to publication 18.11 inches lb EPDM Seal Fluoroelastomer Seal
Z\x 0.2 $82.00 $98.50
C\v 0.3 92.00 122.50
1 0.5 103.50 143.50
1Z\x 0.7 143.00 255.50
2 1.0 206.50 353.00
† Specify choice clearly on order.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Style P576 STYLE P576 – WITH STANDARD GRADE “H” HNBR SEAL OR OPTIONAL GRADE “E” SEAL
Nominal Approx.
MALE ADAPTER – THREADED Size Weight Each Price Each †
Standard Grade “H”
(P X M) HNBR or Grade “E” EPDM Optional Grade “O”
Refer to publication 18.11 inches lb Seal Fluoroelastomer Seal
Z\x x Z\x 0.3 $140.00 $154.00
C\v x Z\x 0.4 146.50 162.00
C\v 0.4 146.50 161.50
1 0.5 168.50 184.00
1 x C\v 0.5 172.00 192.50
1 0.6 172.00 192.50
1Z\x x C\v 0.8 314.00 372.00
1Z\x 1.0 355.50 415.00
2 x 2 1.4 462.00 536.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
† Specify choice clearly on order.
Style P508 STYLE P508 – WITH STANDARD GRADE “H” HNBR SEAL OR OPTIONAL GRADE “E” SEAL
Approx.
SLIP COUPLING Nominal Weight
Size Each Price Each †
(P X P) Standard Grade “H”
Refer to publication 18.11 HNBR or Grade “E” Optional Grade “O”
inches lb EPDM Seal Fluoroelastomer Seal
Z\x 0.3 $96.00 $121.00
C\v 0.4 103.50 135.00
1 0.7 119.00 157.50
1Z\x 1.1 152.50 267.50
2 1.6 194.00 341.00
† Specify choice clearly on order.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Series P569 SERIES P569 – VIC-PRESS SCHEDULE 10S X VIC-PRESS SCHEDULE 10S (P X P)
Price Each
TYPE 316 STAINLESS STEEL Approx. Vic-Press x Vic-Press
Nominal Size Weight Each (P X P) †
BALL VALVE WITH LOCKING
HANDLE Standard Grade “H”
HNBR or Grade “E” Optional Grade “O”
Refer to publication 18.14 inches lb EPDM Seal Fluoroelastomer Seal
Z\x 1.5 $568.50 $594.00
C\v 2.4 661.00 690.50
1 3.6 794.00 833.00
1Z\x 6.9 1232.50 1343.50
PxP
2 9.5 1652.50 1794.50
SERIES P569 VIC-PRESS SCHEDULE 10S X GROOVED (P X G)
Price Each
Approx. Vic-Press x Grooved
Nominal Size Weight Each (P X G) †
PxG
Standard Grade “H”
HNBR or Grade “E” Optional Grade “O”
inches lb EPDM Seal Fluoroelastomer Seal
C\v 2.4 $661.00 $690.50
1 3.6 794.00 833.00
GxG 1Z\x 6.9 1232.50 1343.50
2 9.5 1652.50 1794.50
SERIES P569 GROOVED X GROOVED (G X G)
Approx.
Nominal Size Weight Each Price Each
Grooved x Grooved
inches lb (G X G)
C\v 2.4 $575.00
1 3.6 696.50
1Z\x 6.9 1097.00
2 9.5 1455.00
Nominal
REPAIR KITS Size Price Each
Refer to publication 18.14 inches Repair Kit
Z\x $108.50
C\v 103.00
1 128.00
1Z\x 276.00
2 466.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Repair kits include one stainless steel ball, two seats, two gaskets, one stem seal and one thrust washer.
Series P589 SERIES P589 – VIC-PRESS™ SCHEDULE 10S ENDS WITH STANDARD GRADE “H” HNBR SEAL OR OPTIONAL GRADE “E” SEAL
Nominal Approx.
VIC-PRESS™ SCHEDULE 10S Size Weight Each Price Each †
SYSTEM BRASS BODY BALL Standard Grade “H”
VALVE HNBR or Grade “E” Optional Grade “O”
inches lb EPDM Seal Fluoroelastomer Seal
Stainless Steel Vic-Press™ Type Z\x 1.0 $434.50 $461.50
316 Schedule 10S Ends C\v 1.6 476.00 507.00
Refer to publication 18.11 1 2.8 570.50 610.50
1Z\x 4.7 935.00 1049.00
2 6.9 1190.00 1337.50
† Specify choice clearly on order.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Style P568 STYLE P568 – WITH STANDARD GRADE “H” HNBR SEAL OR OPTIONAL GRADE “E” SEAL
Nominal Approx.
90° ELBOW – SHORT TANGENT Size Weight Each Price Each †
Standard Grade “H”
(P X P) HNBR or Grade “E” Optional Grade “O”
Refer to publication 18.11 inches lb EPDM Seal Fluoroelastomer Seal
Z\x 0.3 $257.50 $284.50
C\v 0.4 290.00 347.50
1 0.8 325.00 391.00
1Z\x 1.4 439.00 525.50
2 2.0 602.50 721.50
† Specify choice clearly on order.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Style P562 STYLE P562 – WITH STANDARD GRADE “H” HNBR SEAL OR OPTIONAL GRADE “E” SEAL
Nominal Approx.
90° STREET ELBOW Size Weight Each Price Each †
Standard Grade “H”
(P X T) HNBR or Grade “E” Optional Grade “O”
Refer to publication 18.11 inches lb EPDM Seal Fluoroelastomer Seal
Z\x 0.3 $257.50 $270.50
C\v 0.4 290.00 306.00
1 0.7 325.00 345.50
1Z\x 1.4 439.00 496.00
2 2.0 602.50 675.00
† Specify choice clearly on order.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Style P571 STYLE P571 – WITH STANDARD GRADE “H” HNBR SEAL OR OPTIONAL GRADE “E” SEAL
Nominal Approx.
45° ELBOW Size Weight Each Price Each †
Standard Grade “H”
(P X P) HNBR or Grade “E” Optional Grade “O”
Refer to publication 18.11 inches lb EPDM Seal Fluoroelastomer Seal
Z\x 0.2 $237.00 $262.50
C\v 0.4 254.50 285.50
1 0.8 285.00 323.50
1Z\x 1.7 381.50 496.00
2 2.5 523.50 669.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
† Specify choice clearly on order.
Style P563 STYLE P563 – WITH STANDARD GRADE “H” HNBR SEAL OR OPTIONAL GRADE “E” SEAL
Nominal Approx.
45° STREET ELBOW Size Weight Each Price Each †
Standard Grade “H”
(P X T) HNBR or Grade “E” Optional Grade “O”
Refer to publication 18.11 inches lb EPDM Seal Fluoroelastomer Seal
Z\x 0.2 $237.00 $249.00
C\v 0.4 254.50 269.50
1 0.8 285.00 304.00
1Z\x 1.7 381.50 439.00
2 2.5 523.50 596.00
† Specify choice clearly on order.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Style P572 STYLE P572 – WITH STANDARD GRADE “H” HNBR SEAL OR OPTIONAL GRADE “E” SEAL
Nominal Approx.
TEE Size Weight Each Price Each †
Standard Grade “H”
(P X P X P) HNBR or Grade “E” Optional Grade “O”
Refer to publication 18.11 inches lb EPDM Seal Fluoroelastomer Seal
Z\x 0.4 $554.50 $594.00
C\v 0.5 599.00 646.50
1 0.9 628.00 687.00
1Z\x 1.5 739.50 911.50
2 2.1 912.50 1133.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
† Specify choice clearly on order.
Style P573 STYLE P573 – WITH STANDARD GRADE “H” HNBR SEAL OR OPTIONAL GRADE “E” SEAL
Nominal Approx.
TEE – REDUCING BRANCH Size Weight Each Price Each †
Standard Grade “H”
(P X P X P) HNBR or Grade “E” Optional Grade “O”
Refer to publication 18.11 inches lb EPDM Seal Fluoroelastomer Seal
C\v x C\v x Z\x 0.5 $632.50 $676.50
1 x 1 x Z\x 0.8 687.00 739.00
C\v 0.8 714.50 770.50
1Z\x x 1Z\x x Z\x 1.2 1009.00 1136.00
C\v 1.3 1016.50 1147.50
1 1.4 1040.50 1175.50
2 x 2 x Z\x 1.7 1179.00 1338.00
C\v 1.7 1214.00 +
1 1.8 1352.50 +
1Z\x 2.0 1388.00 +
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
† Specify choice clearly on order.
+ Quoted on application. Contact Victaulic for pricing and availability.
Style P578 STYLE P578 – WITH STANDARD GRADE “H” HNBR SEAL OR OPTIONAL GRADE “E” SEAL
Nominal Approx.
TEE – REDUCING BRANCH Size Weight Each Price Each †
THREADED Standard Grade “H”
HNBR or Grade “E” Optional Grade “O”
(P X P X F) inches lb EPDM Seal Fluoroelastomer Seal
Refer to publication 18.11 Z\x x Z\x x Z\x 0.4 $772.00 $797.50
C\v x C\v x Z\x 0.5 855.00 886.00
C\v 0.6 877.00 908.00
1 x 1 x Z\x 0.9 937.00 976.00
C\v 0.9 953.50 992.00
1 1.1 1026.00 1064.00
1Z\x x 1Z\x x Z\x 1.4 1120.00 1234.50
C\v 1.5 1160.50 1273.50
1 1.5 1206.50 1320.50
2 x 2 x Z\x 1.7 1235.00 1382.50
C\v 1.7 1280.00 +
1 2.0 1356.50 1504.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
† Specify choice clearly on order.
+ Quoted on application. Contact Victaulic for pricing and availability.
Style P574 STYLE P574 – WITH STANDARD GRADE “H” HNBR SEAL OR OPTIONAL GRADE “E” SEAL
Nominal Approx.
CONCENTRIC REDUCER Size Weight Each Price Each †
Standard Grade “H”
(P X P) HNBR or Grade “E” EPDM Optional Grade “O”
Refer to publication 18.11 inches lb Seal Fluoroelastomer Seal
C\v x Z\x 0.5 $260.00 $288.00
1 x Z\x 0.6 331.00 363.00
C\v 0.7 244.50 279.00
1Z\x x Z\x 0.9 488.50 558.00
C\v 1.0 321.50 393.50
1 1.1 226.50 303.00
2 x Z\x 1.2 843.50 930.00
C\v 1.3 369.50 457.50
1 1.4 277.50 370.50
1Z\x 1.6 277.50 408.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
† Specify choice clearly on order.
Style P575 STYLE P575 – WITH STANDARD GRADE “H” HNBR SEAL OR OPTIONAL GRADE “E” SEAL
Nominal Approx.
FLANGE ADAPTER Size Weight Each Price Each †
Standard Grade “H”
(P X L) HNBR or Grade “E” Optional Grade “O”
Refer to publication 18.11 inches lb EPDM Seal Fluoroelastomer Seal
Z\x 2.2 $1008.00 $1020.00
C\v 2.3 1026.00 1040.00
1 2.8 1049.50 1070.00
1Z\x 3.6 1272.00 1329.50
2 5.8 1413.00 1487.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
† Specify choice clearly on order.
Style P566 STYLE P566 – WITH STANDARD GRADE “H” HNBR SEAL OR OPTIONAL GRADE “E” SEAL
Nominal Approx.
FLANGE ADAPTER Size Weight Each Price Each †
(VAN STONE TYPE) Standard Grade “H”
HNBR or Grade “E” Optional Grade “O”
(P X L) inches lb EPDM Seal Fluoroelastomer Seal
Refer to publication 18.11 Z\x 2.4 $347.50 $361.50
C\v 2.5 347.50 363.00
1 3.0 467.50 486.50
1Z\x 4.1 515.00 572.00
2 6.8 552.50 626.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
† Specify choice clearly on order.
Nominal Approx.
TRANSITION NIPPLE Size Weight Each Price
inches lb Each
(T X G) C\v 0.3 $190.00
Refer to publication 18.11 1 0.5 196.50
1Z\x 0.7 245.50
2 0.9 255.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Style P585 STYLE P585 – WITH STANDARD GRADE “H” HNBR SEAL OR OPTIONAL GRADE “E” SEAL
Nominal Approx.
THREADED UNION ** Size Weight Each Price Each †
Standard Grade “H”
(P X P) HNBR or Grade “E” Optional Grade “O”
Refer to publication 18.11 inches lb EPDM Seal Fluoroelastomer Seal
Z\x 3.0 $834.50 $860.50
C\v 3.7 961.50 991.50
1 4.3 1173.50 1213.00
1Z\x 6.0 1940.50 2054.50
2 6.8 2564.00 2709.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
** Grooved End Union - A grooved end union can be formed with two Style P577 (Type 316 stainless) transition nipples (see
above) and a variety of grooved end couplings equipped with varied gasket materials to meet service requirements. For stan-
dard ductile iron couplings, stainless steel couplings and gaskets refer to the Stainless Steel Products section.
† Specify choice clearly on order.
Style P579 STYLE P579 – WITH STANDARD GRADE “H” HNBR SEAL OR OPTIONAL GRADE “E” SEAL
Nominal Approx.
FEMALE ADAPTER – THREADED Size Weight Each Price Each †
Standard Grade “H”
(P X F) HNBR or Grade “E” EPDM Optional Grade “O”
Refer to publication 18.11 inches lb Seal Fluoroelastomer Seal
Z\x x Z\x 0.3 $184.50 $198.50
C\v x Z\x 0.3 192.50 209.00
C\v 0.4 195.50 211.50
1 x Z\x 0.7 205.50 225.50
C\v 0.6 217.50 238.00
1 0.6 228.50 288.00
1Z\x x 1 1.0 381.00 440.00
1Z\v 0.8 381.00 440.00
1Z\x 1.0 477.00 536.00
2 x 1Z\v 1.1 473.50 549.00
1Z\x 1.3 473.50 549.00
2 1.2 519.00 595.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
† Specify choice clearly on order.
Nominal Approx.
END CAP Size Weight Each Price
Refer to publication 18.11 inches lb Each
Z\x 0.1 $383.00
C\v 0.1 414.00
1 0.3 434.50
1Z\x 0.4 511.00
2 0.5 628.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
PFT510 The Vic-Press™ Schedule 10S System requires a tool specifically designed for products on off-the-shelf
standard ASTM A312 Schedule 10S stainless steel pipe. Refer to Pipe Preparation Tools section for prices
Vic-Press™ Tool and where to call for purchase information.
NOTE: Victaulic Tool Discount will apply.
PFT510 Tool
HDPE
Products
STYLE 905 IPS STANDARD – GRADE “E” OR “T” GASKET, STANDARD OR FLUSH-SEAL™
Grade
“E”
Grade or “T”
COUPLING COUPLING “E” Flush- Stainless
Approx. COMPLETE COMPLETE With or “T” Seal Steel
PIPE Weight With Grade “E” or Grade “E” or “T” Gasket Gasket Fluoropolymer Coated Retaining
inches Each “T” Gasket Flush-Seal Gasket Only Only Bolt/Nut/Washer § Ring †
Nominal Outside Price Each Price Each Price Price Size Price Price
Size Diameter lb Painted * Coated * Painted * Coated * Each Each No. inches Each Each
2 2.375 5.5 $193.50 $387.00 $213.50 $426.50 $63.50 $83.00 2 Z\x x 3Z\v $23.50 $58.50
3 3.500 8.5 236.00 472.00 259.50 518.50 66.00 90.00 2 B\, x 3Z\x 34.50 92.00
4 4.500 13.1 299.50 599.00 329.50 658.50 110.00 140.00 2 B\, x 4Z\v 39.00 123.50
5 5.563 18.7 440.50 881.00 – – 128.00 – 2 C\v x 4Z\v 59.50 155.00
6 6.625 19.4 479.00 957.50 526.50 1053.00 138.50 187.00 2 C\v x 5 74.00 184.00
8 8.625 25.0 635.00 1270.00 699.00 1397.50 182.50 246.50 4 C\v x 6Z\v 79.00 240.00
10 10.750 73.5 773.00 1545.50 – – 238.50 – 4 M\, x 6Z\x 108.00 299.50
12 12.750 86.5 856.00 1712.00 – – 265.00 – 4 M\, x 6Z\x 108.00 359.50
14 14.000 112.6 1550.50 3100.50 – – 450.00 – 4 1Z\, x 7 132.50 419.50
STYLE 905 ISO STANDARD – GRADE “E” OR “T” GASKET
STYLE 907 & STYLE W907 IPS STANDARD – GRADE “E” OR “T” GASKET
Stainless
COUPLING COMPLETE Grade “E” Steel
PIPE Approx. With Grade “E” or “T” or “T” Fluoropolymer Coated Retaining
inches Weight Each Gasket Gasket Only Bolt/Nut/Washer § Ring †
Nominal Outside Style Price Each Size Price
Size Diameter Number lb Painted * Coated * Price Each No. inches Each Price Each
2 2.375 4.7 $245.00 $490.00 $63.50 2 Z\x x 3Z\v + $58.50
3 3.500 6.6 291.00 582.00 66.00 2 B\, x 3Z\x + 92.00
4 4.500 9.4 361.50 723.00 110.00 2 B\, x 4Z\v + 123.50
5 5.563 11.9 508.50 1017.00 128.00 2 C\v x 4Z\v + 155.00
907
6 6.625 13.8 547.00 1094.00 138.50 2 C\v x 5 + 184.00
8 8.625 21.4 730.50 1461.00 182.50 2 C\v x 6Z\v + 240.00
10 10.750 53.0 966.00 1931.50 238.50 4 M\, x 6Z\x + 299.50
12 12.750 62.0 1070.00 2139.50 265.00 4 M\, x 6Z\x + 359.50
14 14.000 W907 81.0 1828.50 3876.50 450.00 4 1Z\, x 7 + 419.50
STYLE 907 & W907 ISO STANDARD – GRADE “E” OR “T” GASKET
COUPLING
COMPLETE Grade “E” or Stainless Steel
Approx. With Grade “E” or “T” Gasket Fluoropolymer Coated Retaining
ISO Size Weight Each Wgt. Each “T” Gasket Only Bolt/Nut/Washer § Ring †
Nominal Size
HDPE Plain End
x Actual Size
Grooved End Price Each Size Price
[mm] Style Number lb [kg] Painted * Coated * Price Each No. inches Each Price Each
63 x 60.3 4.9 2.2 $245.00 $490.00 $63.50 2 Z\x x 3Z\v $23.50 $58.50
75 x 73.0 5.9 2.7 258.00 515.50 64.50 2 B\, x 3Z\v 34.50 73.00
90 x 88.9 6.5 3.0 291.00 582.00 66.00 2 B\, x 4 39.00 92.00
110 x 114.3 9.6 4.4 361.50 723.00 110.00 2 B\, x 4 39.00 124.50
125 x 114.3 11.3 5.1 402.50 805.00 118.00 2 C\v x 4Z\v 59.50 132.50
140 x 141.3 11.9 5.4 508.50 1017.00 128.00 2 C\v x 4Z\v 59.50 155.00
160 x 168.3 907 12.8 5.8 547.00 1094.00 138.50 2 C\v x 5 74.00 184.00
180 x 165.1 7.0 15.4 647.00 1293.50 157.00 2 C\v x 5 157.00 198.00
168.3 15.0 6.8 647.00 1293.50 157.00 2 C\v x 5 74.00 198.00
200 x 219.1 21.7 9.8 713.00 1426.00 176.00 2 C\v x 6Z\v 79.00 216.00
225 x 219.1 22.0 10.0 748.50 1497.00 189.50 2 C\v x 6Z\v 79.00 252.00
250 x 273.0 53.0 24.0 966.00 1391.50 238.50 4 M\, x 6Z\x 108.00 299.50
280 x 273.0 54.0 24.5 1018.00 2035.50 252.00 4 M\, x 6Z\x 108.00 330.00
315 x 323.9 907 61.0 27.7 1070.00 2139.50 265.00 4 M\, x 6Z\x 108.00 359.50
355 x 355.6 W907 81.0 36.7 1938.50 3876.5 450.00 4 1Z\, x 7 132.50 419.50
Style 2971 Refer to Aquamine™ Price List (PL2021-AMP) for product information.
AQUAMINE™ TRANSITION
COUPLING FOR PVC TO HDPE
Refer to publication 50.05
Coupling for Double STYLE 908 IPS STANDARD – GRADE “E” OR “T” GASKET
Grade
Grooved HDPE Pipe COUPLING “E”
Approx. COMPLETE or “T”
STYLE 908 PIPE Weight With Grade “E” or Gasket Fluoropolymer Coated
Refer to publication 19.09 inches Each “T” Gasket Only Bolt/Nut/Washer Set §
Nominal Outside Price Each Price Size Price
Size Diameter lb Painted Coated * Each No. inches Each
8 8.625 59.0 + + + 4 B\, x 5 $206.00
10 10.750 81.0 + + + 4 C\v x 5 229.50
12 12.750 90.0 + + + 4 C\v x 5 229.50
14 14.000 137.0 + + + 4 M\, x 5Z\x 320.50
16 16.000 184.0 $2258.00 + $522.50 4 M\, x 5Z\x 320.50
18 18.000 204.0 3710.00 + 590.50 4 M\, x 5Z\x 320.50
8 – 18”
20 † 20.000 247.0 5516.50 + + 4 M\, x 5Z\x 320.50
22 † 22.000 277.0 6048.00 + 650.00 NR 4 M\, x 5Z\x 320.50
24 † 24.000 366.0 6515.50 + 715.00 4 1 x 6 346.00
28 † 28.000 455.0 7387.00 + 845.00 NR 4 1 x 6 346.00
30 † 30.000 525.0 8144.00 + 909.50 NR 4 1Z\, x 7 455.50
32 † 32.000 594.0 8144.00 + 975.00 4 1Z\, x 7 455.50
36 † 36.000 726.0 11773.50 + 1299.50 NR 4 1Z\v x 7 658.00
STYLE 908 ISO STANDARD – GRADE “E” OR “T” GASKET
Grade
COUPLING “E”
20 – 36” Approx. COMPLETE or “T”
Weight Wgt. With Grade “E” or Gasket Fluoropolymer Coated
ISO Size Each Each “T” Gasket Only Bolt/Nut/Washer Set §
O.D. Price Each Price Size Price
[mm] lb [kg] Painted Coated * Each No. inches Each
250 81.0 29.0 + + + 4 C\v x 5 $229.50
280 77.0 35.0 + + + 4 C\v x 5 229.50
315 90.0 36.0 + + + 4 C\v x 5 229.50
355 137.0 53.0 + + + 4 M\, x 5Z\x 320.50
400 184.0 73.0 $2258.00 + $522.50 4 M\, x 5Z\x 320.50
450 204.0 74.0 3710.00 + 546.50 4 M\, x 5Z\x 320.50
500 247.0 116.0 5516.50 + 590.50 4 M\, x 5Z\x 320.50
560 277.0 119.0 6048.00 + 650.00 4 M\, x 5Z\x 320.50
630 366.0 165.0 6515.50 + 711.00 4 1 x 6 346.00
710 455.0 202.0 7387.00 + 845.00 4 1 x 6 346.00
800 594.0 255.0 8628.50 + 975.00 4 1Z\, x 7 455.50
900 726.0 320.0 11773.50 + 1299.50 4 1Z\v x 7 658.00
Flange Adapter for STYLE 904 IPS STANDARD – GRADE “E” OR “T” GASKET
COUPLING
HDPE-to-Flanged Pipe COMPLETE Grade
With Grade “E” or “E”
STYLE 904 Approx. “T” Gasket or “T” Steel
Refer to publication 19.12 PIPE Weight SDR 11 or SDR 17 Gasket Fluoropolymer Coated Retaining
inches Each HDPE Insert Only Bolt/Nut/Washer § Ring
Nominal Outside Price Each Price Size Price Price
Size Diameter lb Painted Coated * Each No. inches Each Each
3 3.500 10.2 $346.00 + $66.00 2 B\, x 3Z\x $34.50 $92.00
4 4.500 16.1 411.50 + 110.00 2 B\, x 3Z\x 39.00 123.50
6 6.625 23.6 774.50 + 138.50 2 C\v x 4Z\v 74.00 184.00
8 8.625 31.9 1032.50 + 182.50 2 C\v x 6Z\v 79.00 240.00
+ Quoted on application. Contact Victaulic for pricing and availability.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
NOTE: Fusion bonded epoxy and galvanized finishes available. Contact Victaulic for pricing.
§ Price includes one bolt, nut and washer for Flange Adpater sizes 3 – 4” and one bolt and nut and two washers in Flange
Adapter sizes 6 – 8”.
NOTE: Available with stainless steel bolts and nuts. Contact Victaulic for pricing.
* “Painted” option includes enamel coating with fluoropolymer-coated hardware. “Coated” option includes liquid bonded
epoxy coating with stainless steel hardware.
COUPLING COMPLETE †
STYLE 995N PIPE Approx. With Grade “E” or “T” Grade “E” or Plated
inches Weight Each Gasket “T” Bolt & Nut
Refer to publication 19.02
Nominal Outside Price Each Size
Size Diameter lb Painted Plated Gasket Only inches
10 10.750 37.4 $1650.00 $2064.00 $307.50 NR C\v x 6Z\v
12 12.750 47.8 1900.50 2386.00 373.50 NR M\, x 6Z\x
14 14.000 81.0 5367.00 + 533.50 1 x 7#
16 16.000 100.0 7161.00 + 631.50 NR 1 x 7#
18 18.000 127.0 8774.00 + 661.00 NR 1 x 7#
20 20.000 142.0 11913.50 + 714.50 NR 1 x 7#
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
† Surcharge for couplings supplied without gasket. Contact Victaulic for pricing.
* Coupling for High Density Polyethylene Pipe.
Style 99 gaskets fit Style 995N couplings up to 12”.
# Supplied with T-bolts and rocker washer.
See below for spare hardware prices.
NR
Non-returnable
Size
inches Price Each
10 $135.50
12 +
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
Grade “E”
(HDPE TO STEEL) COUPLING COMPLETE † EPDM or
PIPE Approx. With Grade “E” or “T” Grade “T” Plated
STYLE 997
inches Weight Each Gasket Nitrile Bolt & Nut
Refer to publication 19.03
Nominal Outside Price Each Size
Size Diameter lb Painted Plated Gasket Only inches
10 10.750 34.3 $$2157.00 + $230.50 C\v x 6Z\x
12 12.750 37.5 2466.50 + 268.00 M\, x 6Z\x
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
† Surcharge for couplings supplied without gasket. Contact Victaulic for pricing.
NOTE: See Spare Parts Section for spare part prices.
Style 77 gaskets fit Style 997 couplings.
Nom.
Refer to publication 19.11 Size SDR 7 SDR 9 SDR 11 SDR 17
Approx. Approx. Approx. Approx.
Wgt. Ea. Price Wgt. Ea. Price Wgt. Ea. Price Wgt. Ea. Price
inches lb Each lb Each lb Each lb Each
2 0.8 $54.00 0.6 $45.00 0.6 $36.00 0.5 $34.00
No. H10 3 1.5 101.00 1.7 78.00 1.5 55.50 1.1 54.50
4 3.6 124.50 3.0 95.00 2.6 67.00 1.9 65.00
6 9.2 273.00 7.7 225.50 6.6 178.50 4.9 167.50
8 16.0 473.50 14.5 428.50 13.0 382.00 10.0 294.00
Nom.
Refer to publication 19.11 Size SDR 7 SDR 9 SDR 11 SDR 17
Approx. Approx. Approx. Approx.
Wgt. Ea. Price Wgt. Ea. Price Wgt. Ea. Price Wgt. Ea. Price
inches lb Each lb Each lb Each lb Each
2 0.6 $51.50 0.5 $45.00 0.5 $37.50 0.4 $36.00
3 1.4 86.50 1.2 70.50 1.0 54.50 0.7 52.00
No. H11 4 2.6 126.00 2.1 96.50 1.9 66.50 1.4 64.50
6 6.1 238.00 5.0 202.50 4.3 167.00 3.3 160.50
8 11.0 373.00 8.9 339.00 9.0 305.50 7.0 237.50
Tee TEE
Nom.
Refer to publication 19.11 Size SDR 7 SDR 9 SDR 11 SDR 17
Approx. Approx. Approx. Approx.
Wgt. Ea. Price Wgt. Ea. Price Wgt. Ea. Price Wgt. Ea. Price
inches lb Each lb Each lb Each lb Each
2 1.0 $51.50 0.9 $48.00 0.8 $43.00 0.6 $42.00
No. H20 3 2.6 98.50 2.1 77.50 1.9 57.50 1.4 56.00
4 4.6 130.00 3.8 107.50 3.4 84.00 2.5 81.00
6 12.0 316.00 10.1 262.50 8.6 209.50 6.4 201.50
8 23.0 635.00 20.7 554.50 19.0 474.50 15.0 373.00
3” 4” 6” 8”
Size (030) (040) (060) (080)
PRICE OF VALVE COMPLETE WITH OPERATOR
VALVE WITH MANUAL ACTUATOR
Manual Actuator with Grade “E” or “T” Gasket $4869.50 $7791.00 $8829.50 $11036.50
VALVE WITH MANUAL ACTUATOR WITH STEM GUARD
Manual Actuator with Grade “E” or “T” Gasket + + + +
VALVE WITH PNEUMATIC ACTUATOR
Pneumatic Actuator with Grade “E” or “T” Gasket $6492.00 $8440.00 $11036.50 $12984.00
VALVE WITH PNEUMATIC ACTUATOR AND SOLENOID VALVE
Pneumatic Actuator with Weatherproof Enclosure
$4617.00 $9864.50 $12587.00 $14535.00
(Any Voltage) Grade “E” or “T” Gasket
Pneumatic Actuator with Hazardous Location Enclosure
8558.50 10505.50 13139.50 15086.50
(Any Voltage) Grade “E” or “T” Gasket
VALVE WITH PNEUMATIC ACTUATOR AND LIMIT SWITCHES
Pneumatic Actuator with Weatherproof Enclosure
$6870.00 $8817.50 $11414.50 $13361.50
(Any Voltage) Grade “E” or “T” Gasket
Pneumatic Actuator with Hazardous Location Enclosure
8501.00 10449.00 13045.50 14993.00
(Any Voltage) Grade “E” or “T” Gasket
VALVE WITH PNEUMATIC ACTUATOR, LIMIT SWITCHES, AND SOLENOID VALVE
Pneumatic Actuator with Weatherproof Enclosure
$8294.50 $10242.00 $12964.50 $14912.50
(Any Voltage) Grade “E” or “T” Gasket
Pneumatic Actuator with Hazardous Location Enclosure
10567.50 12515.00 15147.50 17095.00
(Any Voltage) Grade “E” or “T” Gasket
VALVE WITH PNEUMATIC ACTUATOR AND TRANSDUCER/POSITIONER
Pneumatic Actuator with Weatherproof Enclosure Linear
$11083.00 $13030.00 $15659.50 $17751.50
Position Transducer Grade “E” or “T” Gasket
Pneumatic Actuator with Hazardous Location Enclosure
Transducer and Electro-pneumatic Positioner 15418.00 17365.50 19983.50 21930.50
Grade “E” or “T” Gasket
3” 4” 6” 8”
Size (030) (040) (060) (080)
PRICE OF VALVE COMPLETE WITH OPERATOR
VALVE WITH HYDRAULIC ACTUATOR
Hydraulic Actuator with Grade “E” or “T” Gasket $6492.00 $8440.00 $11036.50 $12984.00
VALVE WITH HYDRAULIC ACTUATOR AND TRANSDUCER
Hydraulic Actuator with Hydraulic Weatherproof Enclosure
$11083.00 $13030.50 $15660.00 $17751.50
Linear Position Transducer Grade “E” or “T” Gasket
VALVE WITH ELECTRIC ACTUATOR
Electric Actuator with Grade “E” or “T” Gasket + + + +
PNEUMATIC CYLINDER LIMIT SWITCHES (Price per set of 2)
Weatherproof Enclosure (Any Voltage) $378.00 $378.00 $378.00 $378.00
SEAT CARTRIDGE KIT
Includes Replacement Knife/Packing/Seat $2598.00 $3246.50 $3895.50 $5843.00
V - 060 - 906 - H - N - E - 1 - P - 1 - A - 1
NOTE: Electric actuation and other special actuation control options can be quoted upon request. Contact Victaulic for pricing and availability.
CG3100/3300/3500 Cut grooving tools are designed for grooving 8 – 36” HDPE (DR7 – DR21) pipe. The tool mounts on the
exterior pipe wall and cuts and grooves the end of the pipe in a single operation.
Cut Grooving Tool for
The CG3100 and CG3300 tools connect directly to a 120-volt, 50-60 Hz, 20-amp power source. An
HDPE Pipe optional 220-volt single phase, 50-60 Hz model is also available.
Refer to publication 24.06 The CG3500 tool connects directly to a 110-volt single phase, 50-60 Hz, 20-amp power source.
Refer to Section 17 - Pipe Preparation Tools for prices and where to call for purchase
information.
CPVC Products
COUPLING COMPLETE †
Transition Coupling Approx. With Grade “EHP” COUPLING COMPLETE †
PIPE Wgt. Ea. Gasket With Grade “O” Gasket SPARE PARTS
STYLE 356 inches Price Each Price Each Plated Bolt & Nut
Nom. Outside Size §
CPVC/PVC to Steel Size Dia. lb Painted Galv. Painted Galv. No. inches
Refer to publication 33.06
2 2.375 2.6 $68.00 $80.50 + + 2 C\, x 2Z\x
2Z\x 2.875 3.5 77.00 93.00 + + 2 C\, x 2Z\x
3 3.500 4.3 85.50 102.00 + + 2 Z\x x 3
4 4.500 5.9 120.00 144.00 + + 2 Z\x x 3Z\v
6 6.625 8.1 203.00 244.00 + + 2 Z\x x 3Z\v
8 8.625 17.6 323.50 389.50 + + 2 C\v x 5
10 10.750 22.8 587.50 705.00 + + 2 C\v x 6Z\v
12 12.750 24.9 713.00 856.00 + + 2 C\v x 6Z\v
† Surcharge for couplings supplied without gasket. Contact Victaulic for pricing.
§ Metric thread size bolts available. Contact Victaulic.
NOTE: See Spare Parts Section for spare bolt and nut prices.
NOTE: The Style 356 transition coupling uses the Style 107N gasket.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
COUPLING
Transition Coupling COMPLETE
for Potable Water PIPE
Approx.
Wgt. Ea.
With Grade “P”
Gasket SPARE PARTS
Applications inches Price Each Plated Bolt & Nut
Size
STYLE 856 Nom. Size Outside Dia. lb Painted No. inches
2 2.375 2.6 $68.00 2 C\, x 2Z\x
CPVC/PVC to Steel
2Z\x 2.875 3.5 77.00 2 C\, x 2Z\x
Refer to publication 33.16
3 3.500 4.3 85.50 2 Z\x x 3
4 4.500 5.9 120.00 2 Z\x x 3Z\v
6 6.625 8.1 203.00 2 Z\x x 3Z\v
8 8.625 17.6 323.50 2 C\v x 5
10 10.750 22.8 587.50 2 C\v x 6Z\v
12 12.750 24.9 713.00 2 C\v x 6Z\v
NOTE: See Spare Parts Section for spare bolt and nut prices.
NOTE: The Style 856 transition coupling uses the Style 807N gasket.
NOTE: Available with stainless steel bolts and nuts. Contact Victaulic for pricing.
COUPLING
Rigid Coupling COMPLETE
for Potable Water PIPE
Approx.
Wgt. Ea.
With Grade “P”
Gasket SPARE PARTS
Applications inches Price Each Plated Bolt & Nut
Size
STYLE 857 Nom. Size Outside Dia. lb Painted No. inches
Refer to publication 33.17 2 2.375 3.3 $64.50 2 C\, x 2Z\x
2Z\x 2.875 3.6 73.00 2 C\, x 2Z\x
3 3.500 4.4 82.50 2 Z\x x 3
4 4.500 6.1 116.00 2 Z\x x 3Z\v
6 6.625 8.8 194.00 2 Z\x x 3Z\v
8 8.625 18.1 307.00 2 C\v x 5
10 10.750 23.5 559.00 2 C\v x 6Z\v
12 12.750 25.6 670.50 2 C\v x 6Z\v
NOTE: See Spare Parts Section for spare bolt and nut prices.
NOTE: The Style 857 rigid coupling uses the Style 807N gasket.
NOTE: Available with stainless steel bolts and nuts. Contact Victaulic for pricing.
COUPLING
for Potable Water COMPLETE †
Applications PIPE
Approx.
Wgt. Ea.
With Grade “P”
Gasket SPARE PARTS
STYLE 858 Nominal Size Price Each Plated Bolt & Nut
Refer to publication 33.18 Size
inches lb Painted No. Inches
2Z\x x 2 3.8 $77.00 2 C\, x 2Z\x
3 x 2 5.1 85.50 2 Z\x x 3
2Z\x 4.8 85.50 2 Z\x x 3
4 x 2 6.8 120.00 2 Z\x x 3Z\v
2Z\x 6.8 120.00 2 Z\x x 3Z\v
3 6.9 120.00 2 Z\x x 3Z\v
6 x 4 9.6 203.00 2 Z\x x 3Z\v
8 x 6 22.5 323.50 2 C\v x 5
10 x 8 29.2 587.50 2 C\v x 6Z\v
† Surcharge for couplings supplied without gasket. Contact Victaulic for pricing.
NOTE: Available with stainless steel bolts and nuts. Contact Victaulic for pricing.
NOTE: See Spare Parts Section for spare bolt and nut prices.
NOTE: The Style 858 reducing coupling uses the Style 875 gasket.
Tee Approx.
Nom. Size Wgt. Ea.
NO. 352 inches lb Price Each
Refer to publication 33.03 2 1.9 (f ) $136.00
2Z\x 1.3 48.50
3 1.9 72.50
4 2.8 181.50
6 7.8 323.50
8 13.8 738.00
10 68.0 (f ) 2795.50
12 89.4 (f ) 3608.50
(f) = Fabricated fitting
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
COUPLING COUPLING
COMPLETE with COMPLETE with
COUPLING COMPLETE with Grade “EHP” or Grade “EHP” or
Grade “EHP” or “O” Gasket “O” Gasket and “O” Gasket and
and Carbon Steel Bolts & Coated* Carbon Stainless Steel
Nominal Rated Length Approx. Nuts Steel Bolts & Nuts Bolts & Nuts
Size Movement Compressed Neutral Expanded Wgt. Ea. Price Each Price Each Price Each
“EHP”
“EHP” “O” or “O”
inches lb Painted Painted Galv. Painted Galv. Painted Galv.
0.35 9.17 ± 0.07 9.41 ± 0.08 9.69 ± 0.06 3.5 $2234.50 + + + + + +
0.75 12.34 ± 0.12 12.83 ± 0.14 13.37 ± 0.11 6.6 2345.50 + + + + + +
1.15 15.51 ± 0.17 16.24 ± 0.21 17.06 ± 0.15 9.6 2456.50 + + + + + +
1.55 18.68 ± 0.22 19.66 ± 0.27 20.75 ± 0.19 12.7 2567.00 + + + + + +
1.95 21.86 ± 0.28 23.07 ± 0.33 24.44 ± 0.24 15.7 2676.50 + + + + + +
2.35 25.03 ± 0.33 26.48 ± 0.39 28.12 ± 0.28 18.8 2787.50 + + + + + +
2
2.75 28.20 ± 0.38 29.90 ± 0.45 31.81 ± 0.32 21.8 2898.50 + + + + + +
3.15 31.37 ± 0.43 33.31 ± 0.52 35.50 ± 0.36 24.9 3008.50 + + + + + +
3.55 34.54 ± 0.48 36.73 ± 0.58 39.18 ± 0.41 28.0 3120.50 + + + + + +
3.95 37.71 ± 0.53 40.14 ± 0.64 42.87 ± 0.45 31.0 3230.00 + + + + + +
4.35 40.88 ± 0.58 43.55 ± 0.70 46.56 ± 0.49 34.1 3340.00 + + + + + +
4.75 44.05 ± 0.63 46.97 ± 0.76 50.24 ± 0.54 37.1 3451.50 + + + + + +
0.35 9.17 ± 0.07 9.38 ± 0.08 9.62 ± 0.06 4.2 2290.00 + + + + + +
0.75 12.34 ± 0.12 12.76 ± 0.14 13.23 ± 0.11 7.6 2414.00 + + + + + +
1.15 15.51 ± 0.17 16.14 ± 0.21 16.85 ± 0.15 11.0 2538.00 + + + + + +
1.55 18.68 ± 0.22 19.52 ± 0.27 20.47 ± 0.19 14.4 2663.00 + + + + + +
1.95 21.86 ± 0.28 22.90 ± 0.33 24.09 ± 0.24 17.8 2786.50 + + + + + +
2.35 25.03 ± 0.33 26.27 ± 0.39 27.70 ± 0.28 21.2 2910.50 + + + + + +
2Z\x
2.75 28.20 ± 0.38 29.65 ± 0.45 31.32 ± 0.32 24.7 3034.50 + + + + + +
3.15 31.37 ± 0.43 33.03 ± 0.52 34.94 ± 0.36 28.1 3158.50 + + + + + +
3.55 34.54 ± 0.48 36.41 ± 0.58 38.55 ± 0.41 31.5 3282.50 + + + + + +
3.95 37.71 ± 0.53 39.79 ± 0.64 42.17 ± 0.45 34.9 3408.00 + + + + + +
4.35 40.88 ± 0.58 43.17 ± 0.70 45.79 ± 0.49 38.3 3531.00 + + + + + +
4.75 44.05 ± 0.63 46.55 ± 0.76 49.40 ± 0.54 41.7 3655.00 + + + + + +
0.35 9.17 ± 0.07 9.41 ± 0.08 9.69 ± 0.06 5.3 2354.50 + + + + + +
0.75 12.34 ± 0.12 12.83 ± 0.14 13.37 ± 0.11 9.7 2511.00 + + + + + +
1.15 15.51 ± 0.17 16.24 ± 0.21 17.06 ± 0.15 14.1 2669.00 + + + + + +
1.55 18.68 ± 0.22 19.66 ± 0.27 20.75 ± 0.19 18.4 2825.00 + + + + + +
1.95 21.86 ± 0.28 23.07 ± 0.33 24.44 ± 0.24 22.8 2982.00 + + + + + +
2.35 25.03 ± 0.33 26.48 ± 0.39 28.12 ± 0.28 27.1 3139.50 + + + + + +
3
2.75 28.20 ± 0.38 29.90 ± 0.45 31.81 ± 0.32 31.5 3296.50 + + + + + +
3.15 31.37 ± 0.43 33.31 ± 0.52 35.50 ± 0.36 35.8 3452.50 + + + + + +
3.55 34.54 ± 0.48 36.73 ± 0.58 39.18 ± 0.41 40.2 3610.50 + + + + + +
3.95 37.71 ± 0.53 40.14 ± 0.64 42.87 ± 0.45 44.6 3767.00 + + + + + +
4.35 40.88 ± 0.58 43.55 ± 0.70 46.56 ± 0.49 48.9 3923.50 + + + + + +
4.75 44.05 ± 0.63 46.97 ± 0.76 50.24 ± 0.54 53.3 4078.00 + + + + + +
COUPLING COUPLING
COMPLETE with COMPLETE with
COUPLING COMPLETE with Grade “EHP” or Grade “EHP” or
Grade “EHP” or “O” Gasket “O” Gasket and “O” Gasket and
and Carbon Steel Bolts & Coated* Carbon Stainless Steel
Nominal Rated Length Approx. Nuts Steel Bolts & Nuts Bolts & Nuts
Size Movement Compressed Neutral Expanded Wgt. Ea. Price Each Price Each Price Each
“EHP”
“EHP” “O” or “O”
inches lb Painted Painted Galv. Painted Galv. Painted Galv.
0.35 11.22 ± 0.07 11.46 ± 0.08 11.74 ± 0.06 8.3 $2658.50 + + + + + +
0.75 14.44 ± 0.12 14.92 ± 0.14 15.47 ± 0.11 14.6 2843.00 + + + + + +
1.15 17.66 ± 0.17 18.39 ± 0.21 19.21 ± 0.15 20.9 3027.50 + + + + + +
1.55 20.88 ± 0.22 21.85 ± 0.27 22.94 ± 0.19 27.2 3212.00 + + + + + +
1.95 24.10 ± 0.28 25.31 ± 0.33 26.68 ± 0.24 33.5 3398.00 + + + + + +
2.35 27.31 ± 0.33 28.77 ± 0.39 30.41 ± 0.28 39.9 3582.50 + + + + + +
4
2.75 30.53 ± 0.38 32.23 ± 0.45 34.15 ± 0.32 46.2 3767.00 + + + + + +
3.15 33.75 ± 0.43 35.70 ± 0.52 37.88 ± 0.36 52.5 3951.50 + + + + + +
3.55 36.97 ± 0.48 39.16 ± 0.58 41.62 ± 0.41 58.8 4136.00 + + + + + +
3.95 40.19 ± 0.53 42.62 ± 0.64 45.35 ± 0.45 65.2 4320.50 + + + + + +
4.35 43.41 ± 0.58 46.08 ± 0.70 49.09 ± 0.49 71.5 4505.00 + + + + + +
4.75 46.63 ± 0.63 49.54 ± 0.76 52.82 ± 0.54 77.8 4690.50 + + + + + +
0.35 13.22 ± 0.08 13.47 ± 0.08 13.74 ± 0.06 14.2 3635.00 + + + + + +
0.75 16.45 ± 0.13 16.93 ± 0.14 17.47 ± 0.11 23.8 3901.00 + + + + + +
1.15 19.67 ± 0.19 20.40 ± 0.21 21.21 ± 0.15 33.4 4166.00 + + + + + +
1.55 22.89 ± 0.24 23.86 ± 0.27 24.94 ± 0.19 43.0 4431.00 + + + + + +
1.95 26.12 ± 0.30 27.33 ± 0.33 28.68 ± 0.24 52.6 4697.00 + + + + + +
2.35 29.34 ± 0.35 30.80 ± 0.39 32.41 ± 0.28 62.2 4962.50 + + + + + +
6
2.75 32.56 ± 0.41 34.26 ± 0.45 36.15 ± 0.32 71.8 5228.50 + + + + + +
3.15 35.78 ± 0.46 37.73 ± 0.52 39.88 ± 0.36 81.4 5493.50 + + + + + +
3.55 39.01 ± 0.52 41.19 ± 0.58 43.62 ± 0.41 91.0 5758.50 + + + + + +
3.95 42.23 ± 0.57 44.66 ± 0.64 47.35 ± 0.45 100.6 6023.50 + + + + + +
4.35 45.45 ± 0.62 48.13 ± 0.70 51.09 ± 0.49 110.2 2934.00 + + + + + +
4.75 48.68 ± 0.68 51.59 ± 0.76 54.82 ± 0.54 119.8 6553.50 + + + + + +
0.35 13.23 ± 0.08 13.47 ± 0.08 13.74 ± 0.06 26.4 4416.50 + + + + + +
0.75 16.46 ± 0.13 16.95 ± 0.14 17.49 ± 0.11 45.9 4826.00 + + + + + +
1.15 19.69 ± 0.19 20.42 ± 0.21 21.23 ± 0.15 65.4 5237.50 + + + + + +
1.55 22.92 ± 0.24 23.90 ± 0.27 24.97 ± 0.19 84.9 5646.00 + + + + + +
1.95 26.16 ± 0.30 27.37 ± 0.33 28.72 ± 0.24 104.4 6056.00 + + + + + +
2.35 29.39 ± 0.35 30.84 ± 0.39 32.46 ± 0.28 123.9 6465.00 + + + + + +
8
2.75 32.62 ± 0.41 34.32 ± 0.45 36.20 ± 0.32 143.4 6875.00 + + + + + +
3.15 35.85 ± 0.46 37.79 ± 0.52 39.94 ± 0.36 162.8 7285.00 + + + + + +
3.55 39.08 ± 0.52 41.27 ± 0.58 43.69 ± 0.41 182.3 7694.50 + + + + + +
3.95 42.31 ± 0.57 44.74 ± 0.64 47.43 ± 0.45 201.8 8105.00 + + + + + +
4.35 45.54 ± 0.62 48.21 ± 0.70 51.17 ± 0.49 221.3 8515.00 + + + + + +
4.75 48.77 ± 0.68 51.69 ± 0.76 54.92 ± 0.54 240.8 8923.50 + + + + + +
COUPLING COUPLING
COMPLETE with COMPLETE with
COUPLING COMPLETE with Grade “EHP” or Grade “EHP” or
Grade “EHP” or “O” Gasket “O” Gasket and “O” Gasket and
and Carbon Steel Bolts & Coated* Carbon Stainless Steel
Nominal Rated Length Approx. Nuts Steel Bolts & Nuts Bolts & Nuts
Size Movement Compressed Neutral Expanded Wgt. Ea. Price Each Price Each Price Each
“EHP”
“EHP” “O” or “O”
inches lb Painted Painted Galv. Painted Galv. Painted Galv.
0.35 13.23 ± 0.08 13.47 ± 0.08 13.74 ± 0.06 36.0 $5158.00 + + + + + +
0.75 16.46 ± 0.13 16.95 ± 0.14 17.49 ± 0.11 61.7 5827.00 + + + + + +
1.15 19.69 ± 0.19 20.42 ± 0.21 21.23 ± 0.15 87.3 6495.50 + + + + + +
1.55 22.92 ± 0.24 23.90 ± 0.27 24.97 ± 0.19 113.0 7165.50 + + + + + +
1.95 26.16 ± 0.30 27.37 ± 0.33 28.72 ± 0.24 138.7 7835.00 + + + + + +
2.35 29.39 ± 0.35 30.84 ± 0.39 32.46 ± 0.28 164.3 8505.00 + + + + + +
10
2.75 32.62 ± 0.41 34.32 ± 0.45 36.20 ± 0.32 190.0 9078.50 + + + + + +
3.15 35.85 ± 0.46 37.79 ± 0.52 39.94 ± 0.36 215.7 9843.00 + + + + + +
3.55 39.08 ± 0.52 41.27 ± 0.58 43.69 ± 0.41 241.3 10512.50 + + + + + +
3.95 42.31 ± 0.57 44.74 ± 0.64 47.43 ± 0.45 267.0 11182.00 + + + + + +
4.35 45.54 ± 0.62 48.21 ± 0.70 51.17 ± 0.49 292.7 11851.00 + + + + + +
4.75 48.77 ± 0.68 51.69 ± 0.76 54.92 ± 0.54 318.4 12520.00 + + + + + +
0.35 13.23 ± 0.08 13.47 ± 0.08 13.74 ± 0.06 43.5 5603.50 + + + + + +
0.75 16.46 ± 0.13 16.95 ± 0.14 17.49 ± 0.11 72.7 6392.50 + + + + + +
1.15 19.69 ± 0.19 20.42 ± 0.21 21.23 ± 0.15 102.0 7182.50 + + + + + +
1.55 22.92 ± 0.24 23.90 ± 0.27 24.97 ± 0.19 131.2 7972.00 + + + + + +
1.95 26.16 ± 0.30 27.37 ± 0.33 28.72 ± 0.24 160.5 8761.00 + + + + + +
2.35 29.39 ± 0.35 30.84 ± 0.39 32.46 ± 0.28 189.7 9551.00 + + + + + +
12
2.75 32.62 ± 0.41 34.32 ± 0.45 36.20 ± 0.32 218.9 10340.50 + + + + + +
3.15 35.85 ± 0.46 37.79 ± 0.52 39.94 ± 0.36 248.2 11129.50 + + + + + +
3.55 39.08 ± 0.52 41.27 ± 0.58 43.69 ± 0.41 277.4 11919.50 + + + + + +
3.95 42.31 ± 0.57 44.74 ± 0.64 47.43 ± 0.45 306.7 12709.00 + + + + + +
4.35 45.54 ± 0.62 48.21 ± 0.70 51.17 ± 0.49 335.9 13498.50 + + + + + +
4.75 48.77 ± 0.68 51.69 ± 0.76 54.92 ± 0.54 365.2 14264.50 + + + + + +
Size
Class in/DN Movement Length Style Finish Gasket Bolts and Nuts
C E- 2/50 A- 0.35 C - Compressed 355 P - Painted E - EPDM Z - Plated
F- 2½ B- 0.75 N - Neutral G - Galvanized O - Fluoroelastomer X - Stainless Steel
H- 3/80 C- 1.15 E - Expanded B - Fluoropolymer
J - 4/100 D- 1.55 Coated
M- 6/150 E- 1.95
O- 8/200 F- 2.35
P- 10/250 G- 2.75
Q- 12/300 H- 3.15
I - 3.55
J - 3.95
K- 4.35
L- 4.75
Size
Class In./DN Movement Length Style Finish Gasket Bolts and Nuts
C E - 2/50 A - 0.35 C - Compressed 355P H - Blue Enamel P - Fluoroelastomer Blend Z - Plated
F - 21/2 B - 0.75 N - Neutral X - Stainless Steel
H - 3/80 C - 1.15 E - Expanded B - Fluoropolymer
J - 4/100 D - 1.55 Coated
M - 6/150 E - 1.95
O - 8/200 F - 2.35
P - 10/250 G - 2.75
Q - 12/300 H - 3.15
I - 3.55
J - 3.95
K - 4.35
L - 4.75
Copper Products
Style 644 Installation-Ready™ Transition Coupling for Copper Tubing to Stainless Steel Pipe
COUPLING
Transition Coupling COMPLETE
for Copper Tubing to Approx.
Weight
With Grade
“P” or “EHP”
SPARE PARTS
Grade “P” or
Stainless Steel Pipe Actual Outside Diameter Each Gasket “EHP” Gasket
Stainless Steel
STYLE 644 Nominal Size Pipe Copper Tubing
Refer to publication 22.44 inches inches lb Price Each
2 2.375 2.125 2.4 $140.50 $77.50
2Z\x 2.875 2.625 2.6 157.50 84.50
3 3.500 3.125 3.5 176.50 88.00
4 4.500 4.125 4.2 264.00 127.50 NR
6 6.625 6.125 7.2 581.00 274.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
NOTE: Grade P is for potable water systems and Grade EHP is for non-potable water systems.
NOTE: Available with stainless steel bolts and nuts. Contact Victaulic for pricing.
NR
Non-returnable
Approx.
Branch Outlet for Weight MECHANICAL-TCOMPLETE
Copper Tubing Run x Branch Each With Grade “P,” “E” or “T” Gasket
Nominal Size
STYLE 622 inches lb Price Each
Refer to publication 22.12 2Z\x x C\v 3.1 $351.00
1 3.2 401.50
1Z\x 4.1 493.00
3 x C\v 3.4 391.00
1 3.6 418.00
1Z\x 4.5 518.00
4 x C\v 3.3 440.50
1 4.0 465.00
1Z\x 5.0 562.50
NOTE: Grade P is for potable water systems; Grade E is for non-potable water systems; and Grade T is for oil-related services.
Mechanical-T Cross STYLE 622 CROSS – GRADE “P,” “E” OR “T” GASKET
Approx.
Assembly for Copper Weight MECHANICAL-T Cross COMPLETE
Tubing Run x Branch Each With Grade “P,” “E” or “T” Gasket
Nominal Size
STYLE 622 CROSS inches lb Price Each
Refer to publication 22.12 2Z\x x C\v 4.2 $639.50
1 4.4 758.50
1Z\x 6.2 974.00
3 x C\v 4.4 678.50
1 4.8 785.50
1Z\x 6.6 1023.00
4 x C\v 4.5 825.00
1 5.4 876.00
1Z\x 7.4 1085.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
NOTE: Grade P is for potable water systems; Grade E is for non-potable water systems; and Grade T is for oil-related services.
Vic-Flange Adapter for STYLE 641 – GRADE “P,” “E” OR “T” GASKET
VIC-FLANGE
Copper Tubing ADAPTER
COMPLETE
STYLE 641 With Grade
PIPE Approx. “P,” “E” or “T”
To connect grooved copper to inches Weight Each Gasket SPARE PARTS
flanged equipment Grade “P,” “E” Vic-Flange
Refer to publication 22.03 Nominal Actual Outside or “T” Gasket Washers
Size Diameter lb Price Each Price Each Price Each
2 2.125 3.8 $700.50 $63.00 $96.50 NR
2Z\x 2.625 4.7 729.50 69.50 NR
104.50 NR
3 3.125 5.4 764.50 75.00 NR
112.00 NR
4 4.125 7.7 837.00 94.50 NR
177.50 NR
5 5.125 9.3 1125.00 113.50 192.00 NR
6 6.125 10.3 1224.50 130.50 NR
217.50 NR
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
NOTE: See Spare Parts Section for spare part prices.
NOTE: Grade P is for potable water systems; Grade E is for non-potable water systems; and Grade T is for oil-related services.
NR
Non-returnable
Victaulic flange adapters require a smooth, hard surface at the mating flange face for effective sealing.
Some applications, for which the Victaulic flange adapter is otherwise well suited, do not provide an
adequate mating surface. In such cases, it is recommended that a phenolic (Type F) flange washer be
inserted between the Victaulic flange adapter and the mating flange to provide the necessary sealing
surface.
Typical applications where a Victaulic flange washer should be used are:
1.When mating to a serrated flange: a flange gasket should be used adjacent to the serrated flange and
then the flange washer is inserted between the Victaulic flange adapter and the flange gasket.
2. When mating to a wafer valve: where typical valves are rubber lined and partially rubber faced (smooth
or not), the flange washer is placed between the valve and the Victaulic flange adapter.
3. When mating to a rubber faced flange: the flange washer is placed between the Victaulic flange
adapters and the rubber faced flange.
4.When mating C.I. flanges to IPS flanges: the flange washer is placed between the two Victaulic flange
adapters. If one flange is not a Victaulic flange adapter (e.g., flanged valve), then a flanged gasket must be
placed adjacent to that flange and the flange washer must be inserted between the flange gasket and
the Victaulic flange adapter.
5.When mating to components (valves, strainer, etc.) where the component flange face has an insert:
follow the same arrangement as in #1 above.
Approx.
NO. 625 Nominal Size Weight Each
inches lb Price Each
Groove x Groove x Groove 2Z\x x 2Z\x x 2 1.6 $414.50
Refer to publication 22.04 3 x 3 x 2 2.1 533.50
2Z\x 2.4 703.00
4 x 4 x 2 5.3 1189.50
2Z\x 5.8 1189.50
3 6.3 1189.50
5 x 5 x 3 5.4 3627.50
4 8.8 3627.50
6 x 6 x 2Z\x 6.7 4428.50
3 8.1 4428.50
4 9.8 4428.50
5 11.3 4428.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Approx.
NO. 643 Weight
TUBE Each
Refer to publication 22.04
Nominal Size
inches lb Price Each
2 0.3 $83.50
2Z\x 0.4 87.50
3 0.6 91.00
4 0.7 95.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Approx.
NO. 650 Nominal Size Weight Each
inches lb Price Each
Groove x Groove 2Z\x x 2 1.00 $230.50
Refer to publication 22.04 3 x 2 0.95 230.50
2Z\x 1.03 230.50
4 x 2 1.65 469.00
2Z\x 1.95 469.00
3 2.02 469.00
5 x 3 6.30 1315.00
4 6.30 1315.00
6 x 3 6.40 1423.50
4 6.50 1423.50
5 6.70 1423.50
8 x 6 10.00 2498.00
Approx.
NO. 652 Nominal Size Weight Each
inches lb Price Each
Groove x Cup 2 x 1 0.5 $190.50
Refer to publication 22.04 1Z\v 0.5 190.50
1Z\x 0.5 190.50
2Z\x x 1 0.8 232.50
1Z\v 0.6 232.50
1Z\x 0.7 232.50
2 0.7 232.50
3 x 1Z\x 1.1 288.50
2 1.0 288.50
4 x 2 2.0 534.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Dielectric Waterway For copper tube CTS to carbon steel IPS connections, see Section 1 – Grooved IPS Pipe Fittings.
Transition Fittings
Aluminum
Products
Aluminum Coupling Aluminum couplings and fittings available. Refer to publication 21.01 for Style 77A Coupling,
publication 21.02 for Style 78A Coupling, or publication 21.03 for Aluminum Fitting technical
STYLES 77A AND 78A
information. Contact Victaulic for product availability and pricing.
Style 77A
Style 78A
Aluminum Fittings
Aluminum Fittings
Stainless Steel
Products
PIPE Approx.
STYLE 89 inches Wgt. Ea. Price Each PLATED BOLT & NUT
Refer to publication 17.24 COUPLING
COUPLING COMPLETE †
COMPLETE † Galvanized
Galvanized With
With Grade “E” or
Grade “E” or “T”
Nominal Outside “T” Flush-Seal Size §
Size Dia. lb Gasket Gasket No. inches
2 2.375 3.3 $116.00 $158.00 2 B\, x 2C\v
2Z\x 2.875 4.0 135.50 191.50 2 B\, x 3Z\x
3 3.500 4.6 151.50 201.50 2 B\, x 3Z\x
4 4.500 8.2 211.50 284.50 2 C\v x 4Z\v
5 6.625 16.0 360.00 525.00 2 M\, x 5Z\x
6 6.625 16.0 360.00 525.00 2 M\, x 5Z\x
8 8.625 26.3 576.00 713.00 2 1 x 5Z\x
10 10.750 32.8 1008.00 1185.00 2 1 x 6Z\x
12 12.750 42.1 1170.50 1390.50 2 1 x 6Z\x
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Note: Painted Style 89 couplings available upon request. Contact our Engineered Product Group for details.
† Surcharge for couplings supplied without gasket. Contact Victaulic for pricing.
§ Metric thread size bolts available. Contact Victaulic.
Rigid Coupling AGS STYLE W89 – GRADE “E” OR “T” FLUSH-SEAL™ GASKET
PIPE Approx.
inches Wgt.Ea. Price Each PLATED BOLT & NUT
(FOR STAINLESS STEEL PIPE)
COUPLING
STYLE W89
COMPLETE † COUPLING
Refer to publication 20.15 Galvanized COMPLETE †
With Galvanized
Grade “E” or With
“T” Grade “L”
Nominal Outside Flush-Seal Flush-Seal Size §
Size Dia. lb Gasket Gasket No. inches
14 14.000 69.0 $1306.00 $2927.00 2 1Z\, x 5Z\x
16 16.000 83.0 1702.00 3345.50 2 1Z\, x 5Z\x
18 18.000 95.0 1969.50 3612.00 2 1Z\, x 5Z\x
20 20.000 110.0 2338.50 3911.00 2 1Z\, x 5Z\x
24 24.000 190.0 3452.00 4739.50 2 1Z\, x 5Z\x
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
† Surcharge for couplings supplied without gasket. Contact Victaulic for pricing.
§ Metric thread size bolts available. Contact Victaulic.
6 – 12”
Duplex Rigid Coupling STYLE 489DX – GRADE “E” OR “E” GASKET OR FLUSH-SEAL™ GASKET
Flexible Coupling STYLE 475 – GRADE “EW” OR “T” GASKET OR FLUSH-SEAL™ GASKET
Duplex Flexible STYLE 475DX – GRADE “EW” OR “E” GASKET OR FLUSH-SEAL™ GASKET
Flexible Coupling STYLE 77DX – GRADE “EW”, “E” OR “T” GASKET OR FLUSH-SEAL™ GASKET
Approx.
STYLE 77DX Pipe Wgt. Each Price Each Spare Parts
CE8MN COUPLING STAINLESS STEEL BOLTS, SILICON
Refer to publication 17.20 COUPLING COMPLETE † BRONZE NUTS, STAINLESS STEEL
inches COMPLETE † With Grade WASHERS
With Grade “EW” or “T”
Outside “EW” or “T” Flush-Seal Size §
Nom. Size Diameter lb Gasket Gasket No. inches Price Each
C\v 1.050 1.2 $454.50 $492.50 2 C\, x 2 $135.00
1 1.315 1.8 478.00 514.50 2 C\, x 2 135.00
1Z\v 1.660 2.0 532.00 571.00 2 C\, x 2 135.00
1Z\x 1.900 2.3 497.50 536.00 2 C\, x 2 135.00
2 2.375 3.0 617.00 655.00 2 C\, x 2 135.00
2Z\x 2.875 3.1 630.50 679.50 2 C\, x 2 135.00
3 3.500 4.7 669.50 716.50 2 Z\x x 2C\v 190.00
4 4.500 6.8 995.00 1059.00 2 B\, x 3Z\x 190.00
6 6.625 8.5 1655.50 1802.00 2 C\v x 4Z\v 268.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
† Coupling less gasket is additional. Contact Victaulic for details.
NOTE:: This product is supplied standard in CE8MN Duplex Stainless Steel. Reference submittal 17.20 for details.
All other sizes are supplied in Type 316 Stainless Steel, see chart below.
Flexible Coupling STYLE 77S – GRADE “EW” OR “T” GASKET OR FLUSH-SEAL™ GRADE “E”, “EW” OR “T” GASKET
Approx.
Vic-Flange Adapter PIPE Weight Each
inches lb Price Each
STYLE 441 2 3.0 $322.50
Refer to publication 17.27 2Z\x 4.3 387.50
3 4.8 426.00
4 6.9 559.50
6 9.5 703.50
For spare parts see page 22.
Stainless Steel Flange NO. 445F AND NO. 445R – STAINLESS STEEL FLANGE ADAPTER
Approx.
Adapter Nipples Nominal Size End to End Weight Each No 445F No. 445R
Price Each Price Each
NO. 445F AND NO. 445R
Inches Inches Lbs Type 304L Type 316L Type 304L Type 316L
Refer to publication 17.27
1Z\v 4.00 3.3 $765.00 + – –
1Z\x 4.00 3.9 916.00 + $765.00 –
2 4.00 6.2 916.00 + 916.00 $933.00
2Z\x 4.00 9.9 + + + +
3 4.00 11.4 1330.50 $1436.50 1330.50 1436.50
No. 445F 4 6.00 18.4 1859.00 2008.00 1859.50 2008.00
ANSI B16.5 Class 150 5 6.00 21.3 + + + +
Flat Face
6 6.00 27.5 2503.50 2677.00 2503.50 2677.00
8 6.00 41.3 3417.50 4095.00 3417.50 4095.50
10 8.00 59.8 4660.00 + 4396.00 5110.50
12 8.00 88.2 7719.00 9840.00 7719.00 9840.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
No. 445R
+ Quoted on application. Contact Victaulic for pricing and availability.
ANSI B16.5 Class 150
Raised Face
Approx.
Riser Anchor Nominal Size Weight Each
inches lb Price Each
NO. A10S
2 14.0 $1454.00
Refer to publication 17.70
2Z\x 18.0 1622.00
3 24.0 1677.50
4 32.0 2572.50
5 40.0 2796.00
6 80.0 3076.00
8 100.0 3579.00
10 145.0 4585.50
12 170.0 5144.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Stainless Steel NO. A40S STAINLESS STEEL RISER ANCHOR FOR TIGHT SPACES
Approx.
Riser Anchor for Nominal Size Weight Each
Tight Spaces inches lb Price Each
2 10.1 $2067.00
NO. A40S 2Z\x 14.3 2173.00
Refer to publication 17.74 3 18.9 2385.00
4 25.9 2682.00
5 33.9 2915.00
6 59.9 3206.50
8 81.9 3731.50
10 121.5 4781.00
12 146.8 5364.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Standard Schedule 10S, Type 304L and Type 316L Stainless Steel Fittings
Stainless steel fittings are globally sourced. For domestically manufactured fittings, contact Victaulic for pricing and delivery.
Nominal
Refer to publication 17.16 Size 90° Elbow No. 410 SS 45° Elbow No. 411 SS
Approx. Approx.
Weight Center to Weight Center to
Each End Price Each Each End Price Each
Type Type Type Type
Inches Lbs Inches 304L 316L Lbs Inches 304L 316L
No. 410 SS
1 0.7 2.88 – $183.00 0.6 2.00 – $166.50
1Z\v 1.0 3.13 – 186.50 0.8 2.00 – 167.50
1Z\x 1.4 3.50 – 187.00 1.0 2.13 – 170.00
2 2.2 4.50 – 209.50 2.4 2.75 – 187.00
No. 411 SS 2Z\x 3.3 5.00 – 283.50 2.2 2.88 – 245.50
3 2.6 4.50 $274.00 339.50 1.3 2.00 $252.50 312.50
4 4.7 6.00 390.00 485.50 2.3 2.50 360.00 447.00
6 11.0 9.00 1025.50 1280.00 5.5 3.75 677.50 846.00
8 21.2 12.00 1781.00 2222.50 11.0 5.00 1157.50 1446.00
10 36.6 15.00 3513.50 4390.00 18.5 6.25 2705.00 3164.00
12 56.9 18.00 5506.00 6879.00 28.4 7.50 3732.00 4666.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Note: 1 – 2Z\x” available as Type 316 stainless only.
Nom.
Refer to publication 17.05 Size 90° Elbow No. W410 45° Elbow No. W411
Approx. Price Each Approx. Price Each
Wgt. Ea. C-E Type Type Wgt. Ea. C-E Type Type
Inches Lbs Inches 304L 316L Lbs Inches 304L 316L
14 158.0 21.00 + + 83.0 11.00 + +
16 204.3 24.00 + + 101.0 12.00 + +
No. W410 No. W410
18 272.3 30.00 + + 129.0 13.50 + +
14 – 16” Direct 18 – 24”
with Welded 20 312.0 33.00 + + 165.3 15.00 + +
Grooved Only
Tangents 24 559.8 39.00 + + 264.5 17.00 + +
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
Nominal
Refer to publication 17.16 Size 22Z\x° Elbow No. 412 SS 11Z\v° Elbow No. 413 SS
Approx. Approx.
Weight Center to Weight Center to
Each End Price Each Each End Price Each
Type Type Type Type
Inches Lbs Inches 304L 316L Lbs Inches 304L 316L
No. 412 SS C\v – 1.63 + + – 1.38 + +
1 0.5 1.63 + + 0.2 1.38 + +
1Z\v 0.6 1.75 + + 0.4 1.38 + +
1Z\x 0.6 1.75 + + 0.4 1.38 + +
2 1.0 1.88 + + 0.7 1.38 + +
No. 413 SS
2Z\x 1.4 2.00 + + 0.7 1.50 + +
3 1.7 2.25 + + 1.2 1.50 + +
4 2.8 2.88 + + 1.8 1.75 + +
6 5.8 3.18 + + 3.4 2.00 + +
8 9.2 3.88 + + 4.6 2.00 + +
10 13.6 4.38 + + 5.3 2.13 + +
12 19.2 4.88 + + 14.1 2.25 + +
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
† Fittings are segmentally welded stainless steel.
Tee TEE
Nominal Approx.
Refer to publication 17.16 Size Weight Each Center to End Price Each
inches lb Inches Type 304L Type 316L
1 0.7 2.25 $545.00 $567.50
1Z\v 1.5 3.13 638.00 +
1Z\x 2.2 3.38 – 529.50
No. 420 SS 2 2.4 2.75 – 554.50
2Z\x 3.7 3.13 – 675.50
3 3.1 3.75 700.00 874.00
4 4.9 4.50 749.50 936.00
6 11.7 5.88 1456.00 2041.50
8 20.4 7.75 2149.50 3794.50
10 34.4 8.88 4202.00 9689.50
12 52.4 10.38 6332.00 12352.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
No. 20 SS Tees are Schedule 10S, Type 304L or 316L stainless steel from A403CR/S9.
Aprx
Refer to publication 17.05 Nom. Size Wgt. Ea. Tee - No. W420
Price Each
Inches Lbs Type 304L Type 316L
14 102.0 + +
16 123.5 + +
No. W420
18 281.0 + +
20 350.0 + +
24 503.7 + +
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
Approx.
Tee Size Wgt. Each AGS Reducing Tee No. W425
Inches Price Each
SCHEDULE 10S 304/316
Run x Branch Lbs Type 304L Type 316L
Segmentally welded – not a CR 14 x 14 x 4 101.4 + +
class fitting. 6 101.4 + +
Refer to publication 17.05 8 102.5 + +
10 105.1 + +
12 108.1 + +
16 x 16 x 4 126.2 + +
6 126.2 + +
No. W425
8 127.4 + +
10 129.8 + +
12 132.5 + +
14 134.6 + +
18 x 18 x 6 160.0 + +
8 161.0 + +
10 163.1 + +
12 165.6 + +
14 167.6 + +
16 168.2 + +
20 x 20 x 6 197.0 + +
8 198.5 + +
10 200.5 + +
12 202.9 + +
14 204.7 + +
16 205.0 + +
18 208.4 + +
24 x 24 x 6 260.9 + +
8 270.0 + +
10 271.7 + +
12 273.8 + +
14 275.4 + +
16 275.3 + +
18 278.1 + +
20 282.1 + +
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
45° Lateral, True Wye NO. 430 SS 45° LATERAL, NO. 433 SS TRUE WYE AND NO. 435 SS CROSS
Nominal
and Cross Size 45° Lateral No. 430 SS True Wye No. 433 SS Cross No. 435 SS
Refer to publication 17.16 Approx. Approx. Approx.
Weight Weight Weight
Each Price Each Each Price Each Each Price Each
Type Type Type Type Type Type
Inches Lbs 304L 316L Lbs 304L 316L Lbs 304L 316L
C\v 0.8 + + 0.6 + + 0.7 + +
1 1.4 + + 0.9 + + 1.1 + +
1Z\v 1.9 + + 1.2 + + 1.6 + +
No. 430 SS
1Z\x 2.6 + + 1.4 + + 1.9 + +
2 3.3 + + 1.8 + + 2.7 + +
2Z\x 5.3 + + 2.5 + + 3.6 + +
3 6.5 + + 3.4 + + 5.8 + +
4 11.2 + + 5.1 + + 8.0 + +
6 20.9 + + 10.7 + + 13.4 + +
No. 433 SS
8 33.1 + + 16.6 + + 22.1 + +
10 47.5 + + 31.6 + + 54.9 + +
12 79.2 + + 38.4 + + 52.8 + +
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
No. 435 SS
Adapter Nipples
Same prices apply for:
No. 442 SS – Grooved x Beveled
No. 443 SS – Grooved x Grooved
Refer to publication 17.16 No. 442 SS No. 443 SS
Grv. x Bev. Grv. x Grv.
No. W449
AGS Grooved x Original Grooved
Nominal Approx.
SCHEDULE 10S 304/316 Size Weight Each Price Each
Refer to publication 17.16 inches lb Type 304L Type 316L
1Z\x x C\v 1.3 $436.50 $933.50
1 1.4 339.00 394.00
1Z\v 1.5 376.00 410.50
No. 450 SS 2 x C\v 2.0 496.50 690.50
1 2.1 274.50 324.00
1Z\v 2.3 760.00 961.00
1Z\x 1.3 – 372.50
2Z\x x 1 3.0 992.00 1149.00
1Z\v 2.8 734.00 786.00
2 1.7 – 467.00
3 x 1 4.0 783.50 1021.00
1Z\v 4.1 1125.50 +
1Z\x 4.2 766.00 914.00
2 1.6 244.50 362.00
2Z\x 1.5 201.00 249.50
4 x 2 3.9 326.00 569.50
2Z\x 5.8 447.00 840.00
3 2.0 232.50 290.00
6 x 2Z\x 6.8 3745.00 4733.00
3 4.0 749.50 934.00
4 4.2 569.50 709.50
8 x 4 5.3 2725.00 3405.50
6 7.0 1431.00 1784.50
10 x 6 8.8 3374.50 4218.00
8 11.5 3770.50 4712.00
12 x 8 13.2 5135.50 6418.00
10 17.0 4720.00 5896.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
Approx.
Reducer Size Wgt. Ea. AGS Concentric Reducer No. W450
Price Each
SCHEDULE 10S 304/316
Inches Lbs Type 304L Type 316L
Refer to publication 17.05
14 x 6 32.3 + +
8 35.4 + +
10 38.7 + +
12 42.1 + +
No. W450 16 x 6 39.3 + +
8 42.4 + +
10 44.7 + +
12 47.1 + +
14 50.1 + +
18 x 10 50.7 + +
12 54.1 + +
14 56.1 + +
16 59.1 + +
20 x 12 81.7 + +
14 84.7 + +
16 89.7 + +
18 93.7 + +
24 x 10 102.6 + +
12 107.9 + +
14 110.9 + +
16 113.9 + +
18 117.9 + +
20 124.5 + +
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
Nominal Approx.
SCHEDULE 10S 304/316 Size Weight Each Price Each
Refer to publication 17.16 inches lb Type 304L Type 316L
1Z\x x C\v 1.3 $1789.50 +
1 1.4 738.50 $848.50
1Z\v 1.5 + +
No. 451 SS 2 x C\v 2.0 + +
1 2.1 1477.00 1477.00
1Z\v 2.3 1588.00 1694.50
1Z\x 2.5 838.50 961.00
2Z\x x 1 2.8 992.00 1149.00
1Z\x 3.0 – 1242.00
2 3.5 1019.00 1242.00
3 x 1 4.0 + +
1Z\v 4.1 + +
1Z\x 4.2 + +
2 4.3 1030.50 1121.50
2Z\x 4.5 1048.00 1202.50
4 x 2 4.8 2756.50 3996.00
2Z\x 5.8 1284.50 2182.00
3 5.9 2258.50 2671.50
6 x 2Z\x 6.8 3745.00 +
3 6.9 6183.50 +
4 7.0 2258.50 3303.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Other sizes available upon request. Contact Victaulic for details.
+ Quoted on application. Contact Victaulic for pricing and availability.
Approx.
Reducer Size Wgt. Ea. AGS Eccentric Reducer No. W451
Price Each
SCHEDULE 10S 304/316
Inches Lbs Type 304L Type 316L
Refer to publication 17.05
14 x 6 32.3 + +
8 35.4 + +
10 38.7 + +
12 42.1 + +
No. W451 16 x 6 39.3 + +
8 42.4 + +
10 44.7 + +
12 47.1 + +
14 50.1 + +
18 x 10 50.7 + +
12 54.1 + +
14 56.1 + +
16 59.1 + +
20 x 12 81.7 + +
14 84.7 + +
16 89.7 + +
18 93.7 + +
24 x 10 102.6 + +
12 107.9 + +
14 110.9 + +
16 113.9 + +
18 117.9 + +
20 124.5 + +
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
AGS Flanged AGS FLANGED ADAPTER NIPPLES – ANSI 150 RAISED FACE
Cap CAP
Nominal
TYPE 304/316 Size No. 460 SS
Refer to publication 17.16 Approx. Weight
Each Thickness “T” Price Each
inches inches inches Type 304L Type 316L
C\v 0.1 0.75 + $175.50
1 0.2 0.75 + 175.50
1Z\v 0.3 0.75 + 184.50
No. 460 SS 1Z\x 0.4 0.75 + 192.00
2 0.6 1.13 + 264.00
2Z\x 0.9 1.13 + 274.50
3 1.1 1.00 + 494.00
4 1.8 1.13 + 629.50
6 4.0 1.75 + 751.50
8 7.0 2.25 + 1769.00
10 17.8 2.75 + 2315.00
12 26.7 3.25 + 2694.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
Approx.
Nom. Size Wgt. Ea. AGS Cap No. W460
TYPE 304/316
Price Each
Refer to publication 17.05
Inches Lbs Type 304L Type 316L
14 33.2 + +
16 41.2 + +
18 54.6 + +
No. W460
20 67.5 + +
24 96.0 + +
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
Standard Schedule 40S, Type 304L and Type 316L Stainless Steel Fittings
Stainless steel fittings are globally sourced. For domestically manufactured fittings, contact Victaulic for pricing and delivery.
Nominal
Refer to publication 17.16 Size 90° Elbow No. 410H-SS 45° Elbow No. 411H-SS
Approx. Approx.
Weight Each Price Each Weight Each Price Each
Inches Lbs Type 304L Type 316L Lbs Type 304L Type 316L
1 0.7 $583.50 $729.00 0.6 $554.00 $692.00
No. 410H SS 1Z\v 1.3 592.50 740.00 0.9 563.00 702.50
1Z\x 1.4 594.50 742.50 1.1 566.50 707.00
2 2.5 1040.00 1300.50 2.4 1028.00 1284.00
2Z\x 3.8 1181.50 1477.00 2.8 1157.00 +
3 5.4 1395.50 1751.50 4.1 1298.00 1623.00
No. 411H SS
4 12.0 1785.50 2244.00 4.8 1599.00 1997.00
6 29.3 3277.00 4115.50 17.0 2595.00 3243.50
8 59.0 5088.50 6359.00 34.0 4006.00 5007.50
10 99.0 8650.50 10812.50 58.3 6086.50 7476.00
12 142.0 11730.50 14662.50 85.0 6022.00 7527.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
Nominal
Refer to publication 17.16 Size 22Z\x° Elbow No. 412H-SS 11Z\v° Elbow No. 413H-SS
Approx. Approx.
Weight Each Price Each Weight Each Price Each
Inches Lbs Type 304L Type 316L Lbs Type 304L Type 316L
C\v – + + – + +
1 0.6 + + 0.3 + +
No. 412H SS
1Z\v 0.8 + + 0.5 + +
1Z\x 0.8 + + 0.5 + +
2 1.4 + + 1.0 + +
2Z\x 2.3 + + 1.1 + +
No. 413H SS 3 3.1 + + 2.1 + +
4 5.6 + + 3.6 + +
6 12.2 + + 7.0 + +
8 20.0 + + 10.1 + +
10 30.0 + + 11.8 + +
12 40.0 + + 29.3 + +
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
† Fittings are segmentally welded stainless steel.
Nominal Approx.
Refer to publication 17.16 Size Weight Each Price Each Price Each
Inches Lbs Type 304L Type 316L
1 0.9 $1455.50 $1818.50
1Z\v 1.5 1477.00 1846.00
1Z\x 1.7 1498.00 1872.50
No. 420H SS 2 2.5 1669.00 2086.50
2Z\x 4.7 1755.00 2193.00
3 7.0 2010.50 2514.00
4 13.0 2952.00 3689.00
6 26.4 5089.50 6360.50
8 46.1 5559.50 6949.00
10 71.5 12886.50 16108.50
12 100.0 16428.00 20534.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Approx.
Refer to publication 17.16 Nominal Size Weight Each Price Each
Inches Lbs Type 304L Type 316L
2 x 2 x 1 2.5 $2055.50 $2569.00
1Z\v 2.8 2310.00 2886.50
1Z\x 3.2 2610.00 3262.00
No. 425H SS 2Z\x x 2Z\x x 1Z\x 4.4 2954.00 3693.00
2 4.5 3293.00 4116.00
3 x 3 x 1Z\x 4.5 3229.00 4662.50
2 5.2 3456.00 4896.60
2Z\x 5.6 3730.50 5239.00
4 x 4 x 2 10.2 3917.50 5746.00
2Z\x 10.5 4191.00 –
3 11.6 4597.00 6679.00
6 x 6 x 2 22.0 5443.00 6889.00
3 22.4 5343.00 –
4 22.8 5511.50 9686.00
8 x 8 x 3 35.0 – 13040.00
4 45.0 775000 –
6 43.0 10432.00 16542.50
10 x 10 x 4 63.0 – 16686.50
6 68.3 13234.00 –
8 71.0 13349.50 23346.00
12 x 12 x 6 73.0 – 27901.00
8 75.0 18677.00 12451.00
10 77.0 22321.00 14881.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Other sizes available upon request. Contact Victaulic for details.
45° Lateral, True Wye NO. 430H SS 45° LATERAL, NO. 433H SS TRUE WYE AND NO. 435H SS CROSS
Nominal
and Cross Size 45° Lateral No. 430H SS True Wye No. 433H SS Cross No. 435H SS
Refer to publication 17.16 Approx. Approx. Approx.
Weight Weight Weight
Each Price Each Each Price Each Each Price Each
Type Type Type Type Type Type
Inches Lbs 304L 316L Lbs 304L 316L Lbs 304L 316L
C\v 1.0 + + 0.7 + + 0.9 + +
1 1.7 + + 1.1 + + 1.3 + +
1Z\v 2.5 + + 1.5 + + 2.1 + +
No. 430H SS
1Z\x 3.5 + + 1.8 + + 2.5 + +
2 4.6 + + 2.5 + + 3.8 + +
2Z\x 9.0 + + 4.3 + + 6.1 + +
3 11.7 + + 6.1 + + 10.5 + +
4 22.2 + + 10.0 + + 15.8 + +
6 43.6 + + 22.3 + + 28.0 + +
No. 433H SS
8 72.0 + + 36.0 + + 48.0 + +
10 105.0 + + 69.9 + + 121.5 + +
12 165.0 + + 80.0 + + 110.0 + +
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
No. 435H SS
Adapter Nipples
No. 440H SS – Grooved x Threaded
Refer to publication 17.16
No. 440H SS
Grv. x Thd.
Adapter Nipples
Same prices apply for:
No. 442H SS – Grooved x Beveled
No. 443H SS – Grooved x Grooved
Refer to publication 17.16 No. 442H SS No. 443H SS
Grv. x Bev. Grv. x Grv.
Nominal Approx.
Refer to publication 17.16 Size Weight Each Price Each
Inches Lbs Type 304L Type 316L
2 x 1 2.1 $914.00 +
1Z\v 2.4 + +
No. 450H SS
1Z\x 2.5 914.00 $1142.00
2Z\x x 1 3.2 + +
1Z\x 3.4 + +
2 4.0 1143.50 1429.00
3 x 1Z\x 3.6 + +
2 4.8 1242.50 1553.50
2Z\x 5.5 1242.50 1553.50
4 x 2 6.8 + +
2Z\x 7.5 1820.00 2274.50
3 8.6 1259.00 1573.00
6 x 3 15.0 1820.00 2274.50
4 16.0 2337.50 2922.00
8 x 4 24.0 2938.50 +
6 26.0 3487.00 4359.00
10 x 6 40.0 3487.00 6433.50
8 43.0 5869.50 7338.00
12 x 8 52.5 8501.00 10626.50
10 57.0 9000.50 +
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
Nominal Approx.
Refer to publication 17.16 Size Weight Each Price Each
Inches Lbs Type 304L Type 316L
2 x 1 2.1 + +
1Z\v 2.4 + +
No. 451H SS
1Z\x 2.5 $2631.50 +
2Z\x x 1Z\x 3.6 + +
2 4.0 4429.00 +
3 x 1Z\x 3.6 + +
2 4.8 4321.50 $5401.50
2Z\x 5.5 4472.00 5590.00
4 x 2 6.8 + +
2Z\x 7.5 6121.50 +
3 8.6 7781.00 +
6 x 3 15.0 8611.50 10764.00
4 16.0 8910.00 +
8 x 4 24.0 12319.00 +
6 26.0 15016.50 18770.50
10 x 6 40.0 14133.50 +
8 43.0 15203.50 +
12 x 8 52.5 16277.50 20347.00
10 57.0 17370.00 +
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
Cap CAP
Approx.
NO. 460H SS Nominal Weight Thickness
Size Each “T” Price Each
Refer to publication 17.16
Inches Lbs Inches Type 304L Type 316L
C\v 0.2 0.91 $224.00 $259.50
1 0.3 0.91 224.00 259.50
1Z\v 0.6 0.94 240.00 274.50
No. 460H SS 1Z\x 0.7 0.94 249.00 285.50
2 1.2 0.94 341.50 392.50
2Z\x 1.7 0.97 356.00 407.50
3 2.6 0.97 637.00 +
4 4.6 1.03 816.50 +
6 10.1 1.03 973.00 +
8 21.8 6.25 * 2293.50 +
10 34 7.25 * 3153.50 +
12 47.9 8.50 * 3976.50 +
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
* 8 – 12” No. 460H SS sizes are dish caps. End-to-end dimensions are shown instead of thickness.
Actual OD Size
Type in/mm Code Series Disc/Stem Seat Operator
V 2.375/60.3 020 461 X - 316SS/17-4PH E - EPDM 0- Bare
2.875/73.0 024 E461 (461 only) T - Nitrile 2- 10-position handle with memory stop
3.000/76.1 761 E - 316SS/17-4PH O - Fluoroelastomer 3- Gear operator
3.500/88.9 030 (E461 only) 4- Lever lock with tamper-resistant device
4.500/114.3 040 (8"/200 mm)
5.500/139.7 139 5 - Gear operator with memory stop
6.500/165.1 165 6 - Gear operator with chain wheel
6.625/168.3 060 7 - Gear operator with memory stop and
8.500/216.3 216 chain wheel
8.625/219.1 080 8 - Gear operator with AWWA 2" square oper. nut
10.500/267.4 267 S - Bare valve with ISO 5211 diagonal square
10.750/273.0 100 head drive
12.500/318.5 318 X - Stainless steel 10-postion handle with
memory stop
12.750/323.9 120
Vic-300 MasterSeal™
Stainless Steel Butterfly Valve
for Potable Water Applications
SERIES 861
Refer to publication 17.45
Grooved End Ball SERIES 726-S WITH STAINLESS STEEL BODY AND TRIM
Valve Complete
Valve With Valve Complete
Tamper Resistant With
SERIES 726-S Nominal Size Approx. Weight Each Lock/Seal Option Gear Operator *
Refer to publication 17.22 inches lb 1226-16 1226-20
1Z\x 4.7 $1031.00 $1960.50
2 7.5 1213.50 2376.50
2Z\x 11.5 2103.00 3202.50
3 17.3 2826.00 3864.50
8226-16 8226-20
4 44.0 $4493.00 $5729.00
6 82.0 10787.00 11577.50
Lever Handle
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Series 726-S valves are available with electric, pneumatic, and hydraulic actuators or chainwheels. Contact Victaulic for details.
* Valve with gear operator requires additonal lead time. Contact Victaulic for details.
B - 020 - 1 2 2 6 - 16
Check Valve Series 712-S swing check valve is available with Grade “E”, “T” or Fluoroelastomer seat, bumper and
bonnet closure gasket. Specify choice on order. Contact Victaulic for details.
SERIES 712-S Swing check valves are supplied with bonnet cap drilled and tapped with Z\,” NPT pipe plug for chemical
Refer to publication 17.08 injection or other auxiliary connections.
SERIES 712-S – WITH 316 STAINLESS STEEL BODY
Approx.
Size Weight Each Price Each
Valve Complete
Valve Complete with Grade “O”
with Grade “E” or “T” Fluoroelastomer
inches lb Seat & Bonnet Gasket Seat & Bonnet Gasket
2 12.0 $3943.50 $5305.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Approx.
Valve Nominal Size Weight Each Price Each
inches lb “E" or "T” Seat
SERIES 416
2 3.8 $1430.50
Refer to publication 17.41
2Z\x 4.6 1492.00
3 6.2 1760.50
4 21.0 1860.50
6 42.0 3664.00
8 85.0 5005.50
10 130.0 13395.00
12 206.0 15871.00
For Series 416 sizes 2 – 12” – Drilling, tapping and plugs are available. Contact Victaulic for pricing and delivery. Valves come
standard untapped.
For 2 – 3” sizes – One Z\x” NPT drain hole on the downstream side of the seat is available as an option.
For 4 – 12” sizes – Two Z\x” NPT drain holes or one hole on each side of the seat are also available as options.
2 – 3” NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
4 – 12”
Series 816 Stainless Steel Check Valve for Potable Water Applications
Stainless Steel Check SERIES 816 – STAINLESS STEEL CHECK VALVE FOR POTABLE WATER APPLICATIONS
Approx.
Valve for Potable Nominal Size Weight Each Price Each
Water Applications inches lb Fluoroelastomer Seat
2 3.8 $1430.50
SERIES 816 2Z\x 4.6 1492.00
Refer to publication 17.46 3 6.2 1760.50
4 20.1 1860.50
6 42.0 3664.00
8 85.0 5005.50
10 130.0 13395.00
12 206.0 15871.00
For sizes 2 – 12” – Drilling, tapping and plugs are available. Contact Victaulic for pricing and delivery. Valves come standard
untapped.
For 2 – 3” sizes – One Z\x” NPT drain hole on the downstream side of the seat is available as an option.
For 4 – 12” sizes – Two Z\x” NPT drain holes or one hole on each side of the seat are available as options.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
2 – 3”
4 – 12”
Steam, Condensate
and Chemical
System Products
COUPLING
STYLE 870 COMPLETE
With PTFE Seal
Refer to publication 100.02 PIPE Approx. Wgt. Ea. Assembly SPARE PARTS
inches
Nom. Outside PTFE Seal
Size Dia. lb Price Each Assembly
2 2.375 8.4 $496.50 $292.50
2Z\x 2.875 9.5 599.00 345.00
3 3.500 10.6 628.50 385.00
4 4.500 16.1 734.50 447.00
6 6.625 25.6 986.50 604.50
8 8.625 43.2 1302.00 760.50
Approx.
SERIES 871 Size Weight Each
inches lb Price Each
Refer to publication 100.12
2 30.0 $1150.50
2Z\x 46.0 1605.50
3 50.5 1811.50
4 73.0 2481.00
6 148.0 3751.00
8 264.0 5244.50
Approx.
SERIES 159 Size Weight Each
inches lb Price Each
Refer to publication 100.13
2 18.0 $3992.50
2Z\x 29.0 4408.50
3 43.0 5578.50
4 60.0 6966.50
6 150.0 13122.00
8 286.0 20689.00
Carbon Steel Elbows LONG RADIUS 90° ELBOW OR 45° ELBOW – CAST CARBON STEEL
Nom.
Refer to publication 100.01 Size Long Radius 90° Elbow 45° Elbow
No. 890C No. 890HC No. 811C No. 811HC
Sch. 40 Sch. 80 Sch. 40 Sch. 80
Approx. Approx. Approx. Approx.
Wgt. Ea. Price Wgt. Ea. Price Wgt. Ea. Price Wgt. Ea. Price
inches lb Each lb Each lb Each lb Each
2 4.0 $155.50 4.4 $167.50 2.7 $122.50 3.1 $130.00
2Z\x 6.2 221.00 6.6 240.00 4.0 162.00 4.4 174.50
3 8.6 316.50 10.1 363.00 5.7 222.50 6.8 256.50
No. 890C and No. 890HC 4 16.1 581.50 18.5 644.50 10.1 389.50 11.2 436.00
6 37.7 1446.50 47.0 1675.00 22.3 928.50 28.0 1105.00
8 72.1 2600.00 92.8 3305.00 42.8 1744.50 55.3 2066.00
Approx.
Tapped Cap Nominal Wgt. Ea.
inches lb Price Each
NO. 860T
2 1.3 $83.50
Refer to publication 100.01
2Z\x 2.0 105.00
3 2.6 135.00
4 4.4 193.00
6 9.3 339.50
8 16.8 580.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Carbon Steel Flange FLANGE ADAPTER NIPPLES – ANSI CLASS 150 AND CLASS 300 – CAST CARBON STEEL
Nom.
Adapter Nipples Size ANSI Class 150 Flange Adapter Nipple ANSI Class 300 Flange Adapter Nipple
Refer to publication 100.01 No. 845RC Raised No. 846RC Raised
No. 845FC Flat Face Face No. 846FC Flat Face Face
Approx. Approx. Approx. Approx.
Wgt. Ea. Price Wgt. Ea. Price Wgt. Ea. Price Wgt. Ea. Price
inches lb Each lb Each lb Each lb Each
2 6.6 $270.00 6.8 $278.00 8.2 $340.50 8.4 $358.50
2Z\x 9.7 440.00 9.5 411.50 11.7 487.00 11.9 501.00
3 11.7 469.00 12.1 507.00 15.9 626.00 16.1 660.00
4 18.7 796.50 19.2 819.50 28.7 1186.50 28.7 1120.00
No. 845FC and No. 845RC 6 30.9 1120.50 28 1292.00 49.6 1944.00 47.8 1999.00
8 42.3 1831.50 48.5 1949.50 73.9 2840.00 72.3 2897.50
Approx.
Nipple Size x Length Wgt. Ea.
inches Part Code lb Price Each
2 x 6 FB85843U00 1.9 $71.50
OGS-200 Groove x OGS-200 GROOVE X OGS-200 GROOVE X NPT THREAD INSTRUMENTATION NIPPLE - CARBON STEEL
Stainless Steel Elbows ELBOWS – LONG RADIUS 90° ELBOW OR 45° ELBOW – SCH. 40S TYPE 316 STAINLESS STEEL
No. 811S
Stainless Steel Tee STANDARD TEE – SCH. 40S TYPE 316 STAINLESS STEEL
Nominal Tee
Refer to publication 100.01
No. 820S
Approx. Wgt. Ea.
inches lb Price Each
2 6.1 $326.00
2Z\x 9.5 508.50
3 14.1 729.00
4 26.2 1300.50
No. 820S
6 61.3 3255.00
8 124.5 6179.00
Stainless Steel REDUCING TEE – SCH. 40S TYPE 316 STAINLESS STEEL
No. 851S
Stainless Steel Cap CAP – SCH. 40S TYPE 316 STAINLESS STEEL
Nominal Cap
Refer to publication 100.01
No. 860S
Approx.
Wgt. Ea.
inches lb Price Each
2 1.3 $83.50
2Z\x 2.0 114.00
No. 860S 3 2.6 138.00
4 4.4 249.50
6 9.3 542.00
8 16.8 928.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
No. 845FS – ANSI Class 150 Flat Face Flange Adapter Nipple, No. 845RS – ANSI Class 150 Raised Face Flange Adapter Nipple, No. 846FS – ANSI Class 300 Flat Face Flange Adapter Nipple, No. 846RS – ANSI Class 300 Raised Face Flange Adapter Nipple
Stainless Steel Flange FLANGE ADAPTER NIPPLES – ANSI CLASS 150 AND CLASS 300 – SCH. 40S TYPE 316 STAINLESS STEEL
Nom.
Adapter Nipples Size ANSI Class 150 Flange Adapter Nipple ANSI Class 300 Flange Adapter Nipple
Refer to publication 100.01 No. 845RS Raised No. 846RS Raised
No. 845FS Flat Face Face No. 846FS Flat Face Face
Approx. Approx. Approx. Approx.
Wgt. Ea. Price Wgt. Ea. Price Wgt. Ea. Price Wgt. Ea. Price
inches lb Each lb Each lb Each lb Each
2 6.6 $275.00 6.8 $286.50 8.2 $354.00 8.4 $358.50
2Z\x 9.7 395.00 9.5 405.00 11.7 507.00 11.9 513.00
3 11.7 470.00 12.1 490.00 15.9 653.50 16.1 661.50
4 18.7 791.00 19.2 816.00 28.7 1130.00 28.7 1144.50
No. 845FS 6 30.9 1205.00 28.0 1249.00 49.6 2017.00 47.8 2040.50
8 42.3 1885.00 48.5 1909.00 73.9 2952.50 72.3 2975.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
No. 845RS
NO. 826 STEAM OUTLET FITTING – CARBON STEEL, STANDARD WEIGHT, UNPAINTED
Steam and IN-LINE DRIP LEG FITTINGS - NOS. 891C, 891H, 892C AND 892H
Nominal No. 891C (Sch. 40) No. 891H (Sch. 80) No. 892C (Sch. 40) No. 892H (Sch. 80)
Condensate In-Line Approx. Approx. Approx. Approx.
Drip Leg Fittings Wgt. Ea. Price Wgt. Ea. Price Wgt. Ea. Price Wgt. Ea. Price
Refer to publication 100.14 inches lb Each lb Each lb Each lb Each
2 30.6 $3645.00 31.1 $3700.00 37.4 $3719.00 41.9 $3812.00
2Z\x 39.4 4046.00 41.4 4076.00 50.2 4135.00 55.6 4184.00
3 47.8 4167.00 50.4 4230.00 62.9 4271.00 70.7 4407.00
4 74.5 5165.00 82.4 5301.00 80.5 5294.00 90.8 5470.00
6 79.5 5582.00 90.8 5725.00 99.5 5717.00 118.8 5762.00
8 98.0 6302.00 115.8 6289.00 118.0 6437.00 143.8 6463.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Nos. 893C, 893H, 894C and 894H Steam and Condensate Riser Drip Leg Fittings
Steam and RISER DRIP LEG FITTINGS - NOS. 893C, 893H, 894C AND 894H
Nominal No. 893C (Sch. 40) No. 893H (Sch. 80) No. 894C (Sch. 40) No. 894H (Sch. 80)
Condensate Riser Approx. Approx. Approx. Approx.
Drip Leg Fittings Wgt. Ea. Price Wgt. Ea. Price Wgt. Ea. Price Wgt. Ea. Price
Refer to publication 100.15 inches lb Each lb Each lb Each lb Each
2 30.6 $3227.00 32.6 $3281.00 37.4 $3301.00 41.9 $3393.00
2Z\x 39.4 3627.00 41.4 3657.00 50.2 3717.00 55.6 3765.00
3 47.8 3748.00 50.4 3812.00 62.9 3852.00 70.7 3989.00
4 74.5 4614.00 82.4 4749.00 80.5 4743.00 90.8 4918.00
6 142.9 6100.00 162.9 7272.00 153.6 6367.00 177.9 7426.00
8 236.4 9020.00 276.1 9371.00 243.1 9059.00 285.5 9425.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
RG1200 RG1200 is designed for manual grooving of 2 – 6" | DN50 – DN150 Schedule 40 carbon steel and 2 – 3" |
DN50 - DN80 Schedule 80 carbon steel to OGS-200 roll groove specifications. The tool is supplied
complete with 2-6” roll sets; Groove confirmation gauges; Adjustable ratchet with swivel handle; and (10)
shear pins.
Tool Weight/
Shipping
Weight Rental Tool
Tool Model Part Number lb Per Month List Price
RG1200 – OGS-200 Groove Profile R0201200CR 47.0 $1182.00 $2537.50
For tool rating capacity please reference publication 24.11.
For OGS-200 roll groove specifications, please reference publication 25.12.
RG1200 PARTS
Part
Description Number Quantity Price Each
2 – 3” Upper Roll R9S2120U03 – $71.50
4 – 6” Upper Roll R9S4120U06 – 71.50
2 – 3” Lower Roll R9S2120L03 – 144.50
4 – 6” Lower Roll R9S4120L06 – 144.50
2” Groove Confirmation Gauge R020120GGE – 26.00
OGS-200
Confirmation 2Z\x – 3” Groove Confirmation Gauge R024120GGE – 26.00
Gauges 4 – 6” Groove Confirmation Gauge R040120GGE – 26.00
Adjustable Ratchet with Swivel Handle R000120RCH – 275.50
Gear (12x26 Teeth) R0001200GR – 105.50
Shear Pin Punch R000120PNH – 33.00
Shear Pin R000120PIN 10 14.00
RG1210 RG1210 is designed for manual grooving of 2 – 8" | DN50 – DN200 Schedule 40 carbon steel and
2 – 4" | DN50 – DN100 Schedule 80 carbon steel pipe to OGS-200 roll groove specifications. The tool
is supplied complete with 2 – 8” roll sets; Groove confirmation gauges; Adjustable ratchet with swivel
handle; and (10) shear pins.
Tool Weight/
Shipping
Weight Rental Tool
Tool Model Part Number lb Per Month List Price
RG1210 – OGS-200 Groove Profile R0201210CR 95/153 $2861.00 $6140.50
For tool rating capacity please reference publication 24.14.
For OGS-200 roll groove specifications, please reference publication 25.12.
RG1210 PARTS
Part
Description Number Quantity Price Each
2 – 3” Upper Roll Assembly R9S2121U03 1 $217.00
4 – 6” Upper Roll Assembly R9S4121U06 1 210.50
8” Upper Roll Assembly R9S8121U08 1 217.00
2 – 3” Lower Roll Assembly R9S2121L03 1 359.00
4 – 6” Lower Roll Assembly R9S4121L06 1 367.00
8” Lower Roll Assembly R9S8121L08 1 377.50
2” Groove Confirmation Gauge R020120GGE 1 26.00
2Z\x – 3” Groove Confirmation Gauge R024120GGE 1 26.00
4 – 6” Groove Confirmation Gauge R040120GGE 1 26.00
8” Groove Confirmation Gauge R080121GGE 1 25.00
Ratchet Assembly R000121RTA 1 275.50
Shear Pin Punch R000120PNH 1 33.00
Shear Pin R000121PIN 10 24.00
Large Diameter
AGS Vic-Ring
Products
DISTRIBUTOR INFORMATION:
DISTRIBUTOR: DISTRIBUTOR CONTACT NAME:
COMPANY: PHONE:
ADDRESS: FAX:
CITY, STATE, ZIP: E-MAIL:
CONTRACTOR INFORMATION:
CONTRACTOR: CONTRACTOR CONTACT NAME:
COMPANY: PHONE:
ADDRESS: FAX:
CITY, STATE, ZIP: E-MAIL:
PROJECT INFORMATION:
PROJECT NAME: QUOTE NEEDED BY (date):
CITY & STATE: BID DATE:
PROJECT SPEC. INCLUDED REQUESTED SHIPPING DATE:
ENGINEERING FIRM: CONTACT NAME:
CITY & STATE: PHONE:
APPLICATION DATA:
NOMINAL PIPE SIZE: ACTUAL PIPE OD: WALL THICKNESS:
CARBON STEEL: GRADE - SCHEDULE - CLASS-
STAINLESS STEEL: TYPE - SCHEDULE -
DUCTILE IRON: PRESSURE - CLASS -
SYSTEM WORKING PRESSURE (PSI): TEST/PROOF PRESSURE (PSI): TEMPERATURE (DEG. F):
MEDIA/SERVICE:
CONFIGURATION INFORMATION:
COUPLING: STYLE - DISTRIBUTOR CONTACT NAME:
RINGS: SIZE (=PIPE O.D.) - QTY: (PER JOINT - PIPE TO PIPE CONNECTIONS REQUIRE TWO RINGS)
LINING OPTIONS:
UNLINED ABRASION
6287 Rev B Updated 06/2016 © 2016 Victaulic Company. All rights reserved. 1
victaulic.com
COUPLING
For AGS COUPLING COMPLETE †
Vic-Ring System Approx.
COMPLETE † With Flush-Seal
With Flush-Seal Silicone Grade “L”
Size Wgt. Ea “E” or “T” Gasket Gasket SPARE PARTS
AGS STYLE W07
AGS
Refer to publication 16.11 inches Price Each Price Each Vic-Ring Plated Bolt & Nut
Nominal Coupling Price Size §
Pipe Size lb Painted Galv. Painted Galv. Each No. inches
12 14 49.0 $1236.50 1522.50 $2540.00 $2826.00 + 2 1 x 5Z\x
14 16 61.0 1320.00 1684.00 2795.00 3158.50 + 2 1 x 5Z\x
16 18 71.0 1524.00 1974.50 3074.00 3522.50 + 2 1 x 5Z\x
18 20 82.0 2082.50 2610.00 3562.00 4088.00 + 2 1Z\, x 5Z\x
20 22 99.0 2414.00 3213.00 + + + 2 1Z\, x 5Z\x
14 – 24” 22 24 116.0 2669.50 3381.50 3879.50 4590.50 + 2 1Z\, x 5Z\x
24 26 205.0 4281.50 + + + + 4 1C\, x 6
26 28 220.0 5101.50 + + + + 4 1C\, x 6
28 30 227.0 7149.00 + + + + 4 1Z\v x 7
30 32 242.0 7810.00 + + + + 4 1Z\v x 7
32 34 255.0 + + + + + 4 1Z\v x 7
34 36 268.0 8423.00 + + + + 4 1Z\v x 7
36 38 298.0 9679.50 12024.00 + + + 4 1Z\x x 7
26 – 50” 38 40 340.0 10084.00 + + + + 4 1Z\x x 8
40 42 360.0 11235.50 + + + + 4 1Z\x x 8
42 44 390.0 + + + + + 4 1Z\x x 8
44 46 415.0 + + + + + 4 1Z\x x 8
46 48 425.0 12421.00 + + + + 4 1Z\x x 8
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
† Surcharge for couplings supplied without gasket. Contact Victaulic for pricing.
§ Metric thread size bolts available. Contact Victaulic.
NOTE: See Spare Parts Section for spare part prices.
COUPLING
for AGS COUPLING COMPLETE †
Vic-Ring System Approx.
Wgt.
COMPLETE † With Flush-Seal
With Flush-Seal Silicone Grade “L”
Size Ea. “E” or “T” Gasket Gasket SPARE PARTS
AGS STYLE W77
AGS
Refer to publication 16.12 inches Price Each Price Each Vic-Ring Plated Bolt & Nut
Nominal Coupling Price Size §
Pipe Size lb Painted Galv. Painted Galv. Each No. inches
12 14 48.0 $1043.50 $1442.50 $2570.00 $2968.50 + 2 1 x 5Z\x
14 16 58.0 1369.00 1857.50 2845.00 3331.00 + 2 1 x 5Z\x
16 18 65.0 1602.50 2221.00 3150.50 3661.50 + 2 1 x 5Z\x
18 20 82.0 2140.00 2869.00 3619.50 4348.50 + 2 1Z\, x 5Z\x
20 22 99.0 2488.50 3288.00 3981.00 4603.50 + 2 1Z\, x 5Z\x
14 – 24” 22 24 107.0 2760.00 3705.50 4044.50 4916.00 + 2 1Z\, x 5Z\x
24 26 205.0 4318.50 + + + + 4 1Z\, x 6
26 28 220.0 5222.50 + + + + 4 1Z\, x 6
28 30 227.0 7242.00 + + + + 4 1Z\v x 7
30 32 242.0 7944.00 + + + + 4 1Z\v x 7
32 34 255.0 + + + + + 4 1Z\v x 7
34 36 268.0 8519.00 + + + + 4 1Z\v x 7
36 38 298.0 9406.50 10817.00 + + + 4 1Z\x x 7
38 40 340.0 10186.50 + + + + 4 1Z\x x 7
26 – 72”
40 42 360.0 11291.00 + + + + 4 1Z\x x 7
42 44 390.0 + + + + + 4 1Z\x x 7
44 46 415.0 12024.00 + + + + 4 1Z\x x 7
46 48 425.0 12531.00 + + + + 4 1Z\x x 7
48 50 500.0 + + + + + 4 1Z\x x 7
52 54 648.0 + + + + + 4 1Z\x x 7
54 56 676.0 + + + + + 4 1Z\x x 7
58 60 720.0 + + + + + 4 1Z\x x 7
60 62 956.0 + + + + + 8 1Z\x x 7
72 72.000 1140.0 + + + + + 8 1Z\x x 7Z\x
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
† Surcharge for couplings supplied without gasket. Contact Victaulic for pricing.
§ Metric thread size bolts available. Contact Victaulic.
NOTE: See Spare Parts Section for spare part prices.
NOTE: 14 – 78” standard for this size range is the W77 AGS flexible coupling.
For 14 – 24” cut groove systems requiring the original groove coupling see Style 77 coupling.
Pipe Preparation
Tools
† The use of the word "Copper" in the descriptions for the following tools, refers to Type K, L, M, and DWV copper tubing to CTS
dimensions. Please refer to publication 25.06.
* 6061-T4 or 6063-T4 aluminum alloy pipe must be used.
VE26 S/C/SS/P
VE26 S/C/SS/P VE26 is designed for manual grooving of 2 – 6”/DN50 – DN150 steel, stainless steel, aluminum, PVC, and
copper tube.
Tool Weight/
Shipping
Weight Rental Tool
Tool Model Part Number lb Per Month List Price
VE26S – Steel, Stainless Steel R100026VE0 22/25 $1182.00 $2537.50
VE26C – Copper Tube R200026VE0 22/25 1182.00 2537.50
VE26SS – Lightwall Stainless Steel R700026VE0 22/25 1182.00 2537.50
VE26P – Aluminum and PVC Pipe R750026VE0 22/25 1182.00 2537.50
For tool rating capacity please reference publication 24.01.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
VE26/VE46 Power The power drive kit allows for the VE26 and VE46 family of Groove In-Place manual roll grooving tools to
be operated with a stationary power drive.
Drive Kit
Tool Weight/
Shipping
Weight Rental Tool
Tool Model Part Number lb Per Month List Price
VE26/VE46 Power Drive Kit R075026KIT 7/9 N/A $471.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
VE46/P
VE46/P VE46 is designed for manual grooving of 3Z\x – 6”/DN90 – DN150 steel, stainless steel, aluminum and PVC.
Tool Weight/
Shipping
Weight Rental Tool
Tool Model Part Number lb Per Month List Price
VE46 – Steel and Stainless Steel R000046VE0 28/31 $1299.00 $3069.00
VE46P – Aluminum and PVC Plastic R200046VE0 28/31 1299.00 3069.00
For tool rating capacity please reference publication 24.01.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
RG1200 RG1200 is designed for manual grooving of 2 – 6" | DN50 – DN150 Schedule 40 carbon steel and 2 – 3" |
DN50 – DN80 Schedule 80 carbon steel pipe to OGS-200 roll groove specifications. The tool is supplied
complete with 2-6” roll sets; Groove confirmation gauges; Adjustable ratchet with swivel handle; and (10)
shear pins.
Tool Weight/
Shipping
Weight Rental Tool
Tool Model Part Number lb Per Month List Price
RG1200 – OGS-200 Groove Profile R0201200CR 47.0 $1182.00 $2537.50
For tool rating capacity please reference publication 24.11.
For OGS-200 roll groove specifications, please reference publication 25.12.
RG1200 PARTS
Part
Description Number Quantity Price Each
2 – 3” Upper Roll R9S2120U03 1 $71.50
4 – 6” Upper Roll R9S4120U06 1 71.50
2 – 3” Lower Roll R9S2120L03 1 144.50
4 – 6” Lower Roll R9S4120L06 1 144.50
2” Groove Confirmation Gauge R020120GGE 1 26.00
OGS-200
Confirmation 2Z\x – 3” Groove Confirmation Gauge R024120GGE 1 26.00
Gauges 4 – 6” Groove Confirmation Gauge R040120GGE 1 26.00
Adjustable Ratchet with Swivel Handle R000120RCH 1 275.50
Gear (12x26 Teeth) R0001200GR 1 105.50
Shear Pin Punch R000120PNH 1 33.00
Shear Pin R000120PIN 10 14.00
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
RG1210 RG1210 is designed for manual grooving of 2 – 8" | DN50 – DN200 Schedule 40 carbon steel and
2 – 4" | DN50 – DN100 Schedule 80 carbon steel pipe to OGS-200 roll groove specifications. The tool is
supplied complete with 2-6” roll sets; Groove confirmation gauges; Adjustable ratchet with swivel handle;
and (10) shear pins.
Tool Weight/
Shipping
Weight Rental Tool
Tool Model Part Number lb Per Month List Price
RG1210 – OGS-200 Groove Profile R0201210CR 95/153 $2861.00 $6140.50
For tool rating capacity please reference publication 24.14.
RG1210 PARTS
Part
Description Number Quantity Price Each
2 – 3” Upper Roll Assembly R9S2121U03 1 $217.00
4 – 6” Upper Roll Assembly R9S4121U06 1 210.50
8” Upper Roll Assembly R9S8121U08 1 217.00
2 – 3” Lower Roll Assembly R9S2121L03 1 359.00
4 – 6” Lower Roll Assembly R9S4121L06 1 367.00
8” Lower Roll Assembly R9S8121L08 1 377.50
2” Groove Confirmation Gauge R020120GGE 1 26.00
2Z\x – 3” Groove Confirmation Gauge R024120GGE 1 26.00
4 – 6” Groove Confirmation Gauge R040120GGE 1 26.00
8” Groove Confirmation Gauge R080121GGE 1 25.00
Ratchet Assembly R000121RTA 1 275.50
Shear Pin Punch R000120PNH 1 33.00
Shear Pin R000121PIN 10 24.00
VE226 B/S/M/C/BSS/MSS/P
VE226 B/S/M/C/BSS/ The VE226 family of tools is designed to be operated using a standard C\,”/9.5 mm square drive socket
wrench (not included), for roll grooving the following C\v-6”/DN20-DN150 IPS pipe: steel, stainless steel,
MSS/P † aluminum, and PVC. It can also roll groove 2-6” CTS Copper tube. Included are feeler gauges and allen
wrench for depth stop setting. Built-on mount fits Ridgid 300® power drives (optional: drive mounts are
available for the following power drives: Oster 310, Ridgid 535, Ridgid 1224, and Ridgid 1822).
Tool Weight/
Shipping
Weight Rental Tool
Tool Model Part Number lb Per Month List Price ^
VE226B – C\v – 1Z\x”/DN20 – DN40 R2022260FS 27/42 $1289.00 $2842.00
VE226S – 1Z\v – 6”/DN32 – DN150 R2002260FS 27/42 1289.00 2842.00
VE226M – 2 – 6”/DN50 – DN150 R3002260FS 27/42 1289.00 2842.00
VE226C – 2 – 6” R1002260FS 27/42 1289.00 2842.00
VE226BSS – C\v – 1Z\x”/DN20 – DN40 R00X2260FS 27/42 1289.00 2842.00
VE226MSS – 2 – 6”/DN50 – DN150 RXM02260FS 27/42 1289.00 2842.00
VE226P – 2 – 6”/DN50 – DN150 R6002260FS 27/42 1289.00 2842.00
† NOTE: When ordering tools that require a power drive, you must determine the type of drive to be used.
^ For proper operation, a power drive and pipe stand are required. See Accessories for details.
For tool rating capacity please reference publication 24.01.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
VE226 Power Drive Kit Kit for connecting a VE226 Roll Grooving Tool to a Ridgid™ * 700 Power Drive.
Tool Weight/
Shipping Weight Tool
Tool Model Part Number lb List Price
VE226 Power Drive Kit † R700226KIT 75/115 $4620.50
† Drive unit not included.
* Ridgid is a registered trademark of the Ridge Tool Company. Ridgid 700 not included in kit. Victaulic is not associated with Ridgid
Tool Company.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
VE206 VE206 portable roll grooving tool with a self-contained power drive provides capability of grooving
1Z\v – 6”/DN32 – DN150 pipe, up to and including Schedule 40. The tool requires 110V, 15-amp power
source. Tool is supplied complete with standard roll sets for steel 1Z\v” – 6”/DN32 – DN150
(4 – 6”/DN100 – DN150 rolls are installed).
Tool Weight Tool
Tool Model Part Number lb List Price
VE206 – 110V with Ridgid* 700 Power Drive R000206MAS 244 $13236.00
VE206 – without power drive unit R000206MA1 220 9455.50
* Ridgid™ is a trademark of Ridgid, Inc. Victaulic is not associated with Ridgid, Inc.
Other compatible power drive units are available upon request.
For tool rating capacity please reference publication 24.01.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
RG3212
RG3212 The RG3212 is a self-contained, transportable roll grooving tool with an integral drive motor and
hydraulic feed unit. The RG3212 requires a 120V, 15-amp power source. The tool is supplied with a PS3212
pipe stand and roll sets for 2”-12”/ DN50 – DN300 carbon steel pipe.
Tool Weight Tool
Tool Model Part Number lb List Price
RG3212 Roll Grooving Tool with PS3212 Pipe Stand R0003212RG 302 $10801.50
For tool rating capacity please reference publication 24.19.
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
VE272SFS † The VE272SFS portable roll groover mounts easily to the Victaulic Ridgid 300® Power Drive. The VE272SFS
is operated using a hand pump. A unique pivot arm design reduces handle effort. Roll changes are quick
and easy. The tool is supplied complete with 2 – 12”/DN50 – DN300 roll sets; 8 – 12”/DN200 – DN300 rolls
are installed.
NOTE: Optional C\v and 1 – 1Z\x”/DN20 – DN40 grooving rolls available.
Requires a Ridgid 300 power drive.
Tool Weight/
Shipping
Weight Rental Tool
Tool Model Part Number lb Per Month List Price
VE272SFS R000272SFS 184/250 $2031.00 $10801.00^
Optional Stabilizer
R4002720FS 23 150.00 2936.00
(8 – 12”/DN200 – DN300 only)
† NOTE: When ordering tools that require a power drive, you must determine the type of drive to be used.
^ For proper operation, a power drive and pipe stand are required. See Accessories for details.
For tool rating capacity please reference publication 24.01.
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
VE270FSD Completely self-contained unit with integral gear motor, safety guards, safety foot switch and power
cord/plug. The VE270FSD uses a 110 power source, with a 220V model optional upon request. The tool is
supplied complete with 2 – 12”/DN50 – DN300 roll sets; 8 – 12”/DN200 – DN300 rolls are installed.
NOTE: Optional C\v/DN20 and 1 – 1Z\x”/DN25 – DN40 grooving rolls available.
Tool Weight/
Shipping
Weight Rental Tool
Tool Model Part Number lb Per Month List Price
VE270FSD – 110V R000270FSD 340/410 $4116.00 $20490.50^
Optional stabilizer
R400276FSD 23 210.50 3224.00
(8 – 12”/DN200 – DN300 only)
^ For proper operation, a pipe stand is required. See Accessories for details.
For tool rating capacity please reference publication 24.01.
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
VE416FS § VE416FS is provided with a mounting stand for field or shop assembly and set up. The stand and tool
must be mounted to a Ridgid 300® 38 rpm power drive before grooving. VE416FS is supplied complete
with 2 – 16”/50 – 400 mm roll sets (8 – 12”/200 – 300 mm rolls are installed, unless otherwise specified). It
is equipped with a pipe stabilizer for 6 – 16”/150 – 400 mm nominal pipe sizes to prevent pipe sway.
2 – 12”/50 – 300 mm Original Groove Rolls and 14 – 16”/350 – 400 mm AGS Rolls
Tool Weight/
Shipping
Weight Rental Tool
Tool Model Part Number lb Per Month List Price
VE416FS R0004160FS 240/400 $5552.50 $35083.00^
^ For proper operation, a pipe stand is required. See Accessories for details.
For tool rating capacity please reference publication 24.01.
§ This tool should not be used for field production grooving. For field production
grooving capabilities, use a VE450FSD tool. VE416FS/FSD is designed for occasional
field grooving of AGS pipe.
Optional Rolls: Optional rolls are available for Schedule 5S and 10S stainless steel pipe, PVC and
aluminum pipe, and type K, L, M and DWV copper tubing.
VE416FS GROOVING ROLLS *
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
VE416FSD § VE416FSD tools are completely self-contained units with integral gear motor, safety foot switch and
power cord/plug. VE416FSD uses 110V power and is supplied complete with 2 – 16”/50 – 400 mm roll sets
* (8 – 12”/200 – 300 mm rolls are installed). It is equipped with a pipe stabilizer for 6 – 16”/150 – 400 mm
nominal pipe sizes to prevent pipe sway.
2 – 12”/50 – 300 mm Original Groove Rolls and 14 – 16”/350 – 400 AGS Rolls
* For additional standard rolls and special rolls, see next page.
Tool Weigth/
Shipping
Weight Rental Tool
Tool Model Part Number lb Per Month List Price
VE416FSD – 110V R000417FSD 340/450 $7473.00 $47213.00^
^ For proper operation, a pipe stand is required. See Accessories for details.
For tool rating capacity please reference publication 24.01.
§ This tool should not be used for field production grooving. For field production
grooving capabilities, use a VE450FSD tool. VE416FS/FSD is designed for occasional
field grooving of AGS pipe.
Optional Rolls: Optional rolls are available for Schedule 5S and 10S stainless steel pipe, PVC and
aluminum pipe, and type K, L, M and DWV copper tubing.
VE416FSD GROOVING ROLLS *
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
VE450FSD VE450FSD is a self-contained unit with two 220 volt, single phase 50/60 hz, 20 amp integral gear motors
to handle heavier loads, safety foot switch and power cord/plug. VE450FSD is supplied complete with 4 –
12”/100 – 300 mm original groove roll sets and 14 – 24”/350 – 600 mm AGS groove roll sets
(8 – 12”/200 – 300 mm rolls are installed, unless otherwise specified).
Tool Weight/
Shipping
Weight Rental Tool
Tool Model Part Number lb Per Month List Price
VE450FSD R000450FSD 825 $7734.50 $60681.50
Optional Rolls: Optional rolls are available for 4 – 18”/100 – 450 mm light wall stainless steel
original groove; 14 – 24”/350 – 600 mm light wall stainless steel AGS groove; and 4 – 12”/100 – 300
mm EndSeal (ES) groove. RP roll sets are also available for roll grooving aluminum and plastic.
Note: VE450FSD is designed for field use only and should not be used for shop
production.
VE450FSD GROOVING ROLLS *
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
VE268 † Fully-motorized, semi-automatic, electro-hydraulic tool complete with safety guards, safety foot switch
and power cord. The VE268 requires a 220/440V, 3 phase, 60 hertz power supply for operation and is
equipped with a pipe stabilizer for 8 – 12”/200 – 300 mm nominal pipe sizes to prevent pipe sway. The
tool is shipped fully assembled for standard grooving (2 – 12”/50 – 300 mm pipe) *
(8 – 12”/200 – 300 mm rolls are installed, unless otherwise specified).
NOTE: Optional C\v/20mm and 1 – 1Z\x”/25 – 40 mm grooving rolls available.
Request RP-268 for power requirements or visit the Victaulic web site.
† These tools are rated for 220 volt service. They cannot be used with 208 volt service. For individual
amperage power requirements, refer to RP sheet supplied with tool. Each model may require
different incoming power requirements.(If your service is 208 volts, a “Boost and Buck Transformer” may
be required.)
3 phase requires tool power to be hard wired by a local certified electrician.
Tool Weight/
Shipping
Weight Rental Tool
Tool Model Part Number lb Per Month List Price
VE268 – 220V R000268VE0 735/766 $4860.50 $43867.00^
VE268 – 440V R000268VE4 735/766 4860.50 43867.00
^ For proper operation, a pipe stand is required. See Accessories for details.
For tool rating capacity please reference publication 24.01.
VE414MC † NOTE: All shop models shipped set for 220 power, unless specified otherwise. 3 phase power requires
tool to be hard wired by a local certified electrician.
Fully-motorized, semi-automatic, hydraulic tool is shipped fully assembled with rolls for standard
grooving (2 – 16”/50 – 400 mm pipe *). Requires 220/440V, 3 phase, 60 Hz power supply. Safety guard,
safety foot switch and instructions are included. Pipe stabilizer for pipe 8”/200 mm and larger is included,
to prevent pipe sway.
2 – 12”/50 – 300 mm Original Groove Rolls
14 – 16”/350 – 400 mm AGS Groove Rolls
NOTE: New tools supplied with AGS rolls when 14 – 16”/350 – 400 mm roll sets are specified.
Request RP-414MC for power requirements or visit the Victaulic web site.
† These tools are rated for 220 volt service. They cannot be used with 208 volt service. For individual
amperage power requirements, refer to RP sheet supplied with tool. Each model may require different
incoming power requirements. (If your service is 208 volts, a “Boost & Buck Transformer” may be required.)
* For additional standard rolls and special rolls, see next page.
Tool Weight/
Shipping
Weight Rental Tool
Tool Model Part Number lb Per Month List Price
VE414MC 220V R000414MC1 735/830 $7436.00 $63133.50^
VE414MC 380V R000415MC1 735/830 7436.00 66441.00^
VE414MC 440V R000414MC2 735/830 7436.00 63133.50^
^ For proper operation, a pipe stand is required. See Accessories for details.
Optional Rolls: Optional rolls are available for Schedule 5S and 10S stainless steel pipe, PVC and
aluminum pipe, and type K, L, M and DWV copper tubing. AGS roll sets for 14 – 16”/350 – 400 mm
std. wall carbon steel pipe are now standard. Contact Victaulic for pricing and availability.
For product applications requiring the original groove roll sets, please contact Victaulic for ordering
information.
VE414MC GROOVING ROLLS *
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
VE460 † NOTE: All shop models shipped set for 220 power, unless specified otherwise. 3 phase power requires
tool to be hard wired by a local certified electrician.
Base Tool – Fully-motorized, semi-automatic, hydraulic shop tool is shipped fully assembled with rolls for
standard grooving (4 – 24”/DN100 – DN600) .500 wall maximum. 8 – 12” rolls are installed.
4 – 12”/DN100 – DN300 Original Groove System Groove Rolls
14 – 24”/DN350 – DN600 AGS Groove Rolls
Requires 220/440 V/3 phase/60 Hz power supply. All tools are shipped 220 V as a standard. Operating
instructions included.
Request RP-460 for power requirements or visit the Victaulic web site.
† These tools are rated for 220 volt service. They cannot be used with 208 volt service. For individual
amperage power requirements, refer to RP sheet supplied with tool. Each model may require
different incoming power requirements. (If your service is 208 volts, a “Boost and Buck Transformer” may
be required.)
See kits below for components required to groove above 24”/DN600.
Support Tool
Railing and Base Weight/
Platfrom (Quantity/ Shipping Rental
Part Kit Part Weight Per Recommended
Tool Model Number Roll Sets Included Quantity Number) lb Month List Price Pipe Stand ^
VAPS224
4 – 6”/DN100 – DN150 (R000224PS0)
(R9Q1460006), OR
TOOL
8 – 12”/DN200 – DN300 VAPS1672
ONLY R000460VE0 N/A N/A 1500/1750 $17827.00 $115476.50
(R9Q1460012), (R0001672PS)
VE460
14 – 24”/DN350 – DN600 OR
(RWQ2460024) AGS VAP131R
(R101131ASY)
Optional Kits for Grooving Above 24” ‡
KIT 1
26 – 38”/ 26 – 38”/DN650 – DN950 1 1 VAPS1672
R260460KIT N/A 3191.00 16542.00
DN650 – (RWQ3460038) AGS (R550460KIT) (R551460PNT) (R0001672PS)
DN950 LIFTING POINT
FRONT
LIFTING POINT
KIT 2
40 – 50”/ 40 – 50”/DN1000 – DN1250 1* 2 ** VAPS1672
R400460KIT N/A 3586.00 16945.50
DN1000 – LIFTING POINT LIFTING POINT
(RWQ3460050) AGS (R550460KIT) (R551460PNT) (R0001672PS)
DN1250 LIFTING POINT
FRONT
LIFTING POINT
FRONT
KIT 3
54 – 60”/ 54 – 60”/DN1350 – DN1500 1* 3 ** VAPS1672
R500460KIT N/A 4010.00 17348.50
DN1350 – LIFTING POINT LIFTING POINT
FRONT
LIFTING POINT LIFTING POINT
FRONT
Optional Rolls: Optional rolls are available for Schedule 5S and 10S stainless steel pipe, PVC, and aluminum pipe.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
^ For proper operation, a pipe stand is required. See Accessories for details.
‡ Optional Accessory Kits list REQUIRED COMPONENTS to groove up to the specified size. Kit components can be ordered individually or as a kit.
* Railing and Platform Kit is required only if preceding kit has not been ordered.
** Only one (1) Support Base is required if preceding kit has been ordered.
For tool rating capacity please reference publication 24.01.
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
50T
50T NOTE: 50T shipped set for 380V, unless specified otherwise. 3 phase power requires tool to be hard
wired by a local certified electrician.
Base Tool – Fully-motorized, semi-automatic, hydraulic tool is shipped complete with safety guards and
safety foot switch.
Capable of roll grooving 14 – 72”/DN350 – DN1700 steel pipe.
Support bases are required for roll grooving 26”/DN650 and larger pipe sizes. Each support is 16”/DN400
in height and corresponds with a range of allowable pipe sizes.
Tool can also be supplied in various voltages. Contact Victaulic for details.
Tool Weight/
Shipping
Weight Rental
Tool Model Part Number lb Per Month Tool List Price
50T ^ R14050T3ZR 3800/4100 $22179.50 $126893.00
For tool rating capacity please reference publication 24.09.
^ For proper operation, an approved pipe stand is required. See Victaulic Fabrication Cell for details.
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
VAP131R
FRONT
LIFTING POINT LIFTING POINT
(R101131ASY)
FRONT
(R0001672PS)
Kit LIFTING POINT
LIFTING POINT
FRONT
FRONT
LIFTING POINT
LIFTING POINT
(RW90550072) AGS
FRONT
RG5200i
RG5200i NOTE: All shop models shipped set for 220 power. For other voltage inquiries, contact Victaulic. 3 phase
power requires tool to be hard wired by a local certified electrician.
RG5200i Grooving Capacity: Fully automated 4 – 12”/100 – 300 mm OGS and 14 – 16”/350 – 400 mm AGS.
Semi-automated 18 – 24”/450 – 600 mm AGS; once groove is complete, the operator must manually mea-
sure “C” dimension with a Go/No-Go tape.
Optional stainless steel rolls available. Specify on order.
Supplied with roll sets for grooving 4 – 24”/100 – 600 mm carbon steel Schedule 10 – 40 pipe
Tool requires commission by a certified Victaulic representative
Required 18 Amp, 208 – 240 VAC three-phase power, 50/60 Hz
Victaulic VAP131R or equivalent pipe stand is required and is critical for proper operation of the RG5200i
Lease Per Month (Lease Only)
7 – 12 13 – 36 37 – 60
Tool Model 1 – 6 Months Months Months Months
RG5200i $4000.50 $2941.50 $1867.50 $1566.50
VAP131R 835.00 532.00 418.50 304.00
^ For proper operation, an approved pipe stand is required. See Victaulic Fabrication Cell for details.
Replacement reflective magnets are available for purchase at $12.50 each LIST. Request part code NM00G52004.
Stainless steel targets are available for purchase at $16.50 per sheet. Each sheet has 64 reflective targets. Targets may not be
re-used. Request part code NMSC000016.
For tool rating capacity please reference publication 24.05.
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
Pipe Size
Pipe Range
Material Part Number inches | mm Lease Price Per Set
RXQ1G52006 4 – 6/100 – 150 +
Stainless Steel (Sch. 5 – 10)
RXQ1G52012 8 – 12/200 – 300 +
R9Q1G52006 4 – 6/100 – 150 +
Carbon Steel (Sch. 40) R9Q1G52012 8 – 12/200 – 300 +
RWQ2G52024 14 – 24/350 – 600 AGS +
+ Quoted on application. Contact Victaulic for pricing and availability.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Lease pricing for roll sets varies on contract terms. Contact Victaulic for pricing, terms and conditions.
Roll sets for the RG5200i are not compatible with other Victaulic grooving tools.
Contact Victaulic for lease details.
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
Victaulic Includes hydraulic adjustable pipe stand and tracks, tool support, two adjustable positioner tables, and
an assembly table. Also includes caster wheels and ball transfers. Grooving tools are offered with the
Fabrication Cell package, but are not included in the price of the base package.
The Victaulic Fabrication Cell is designed for 4 – 24”/100 – 600 mm pipe for single random lengths. Pipe
lengths smaller than single randoms require friction slides.
VICTAULIC FABRICATION CELL
Tool Accessories
VAPS112 Adjustable Pipe Stands are portable and self-standing units. Turnstile design allows pipe to be spun
around for grooving of both pipe ends without dismounting pipe from stand. Unique trough design
allows for rotational and forward/traverse movement. They are designed for direct use with roll grooving
tools: VE272SFS, VE268, VE270FSD.
Capacities: 1 – 12”/25 – 300 mm IPS pipe †
Load Rating: 1075 lbs
Vertical Stroke: 14Z\x”/368.3 mm for adjusting rod; 8Z\x”/215.9 mm leg adjustment; 23”/584.2 mm total
Min. Pipe Height from Floor: 23”/584.2 mm on 12”/304.8 mm pipe; 21”/533.4 on 1”/25.4 mm pipe
Handle Effort Required to Raise 1800 lbs Load: 50 lbs Max.
Tool Weight/
Shipping
Weight Rental Tool
Tool Model Part Number lb Per Month List Price
VAPS 112 R000112PS0 190/220 $1216.00 $8770.00
† Indicates pipe size capacity. For wall thickness capacity and general tool ratings see separate Tool Rating Data in publication
24.01.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
VAPS224 Adjustable Pipe Stands are portable and self-standing units that permit free pipe rotation and traversing
on ball transfers. Turnstile design allows pipe to be spun around for grooving of both pipe ends
without dismounting pipe from stand. They are designed for direct use with roll grooving tools: VE416/
FSD, VE414MC, VE436MC, VE460, 50T.
Capacities: 2 – 24”/50 – 600 mm IPS pipe †
Load Rating: 1800 lbs
Vertical Stroke: 21”/533.4 mm
Min. Pipe Height from Floor: 14”/355.6 mm on 24”/609.6 mm IPS pipe
Max. Pipe Height from Floor: 39”/990.6 mm on 2”/50.8 mm IPS pipe
Handle Effort Required to Raise 1800 lbs Load: 50 lbs Max.
Tool Weight/
Shipping
Weight Rental Tool
Tool Model Part Number lb Per Month List Price
VAPS 224 R000224PS0 260/315 $1479.00 $13164.50
† Indicates pipe size capacity. For wall thickness capacity and general tool ratings see separate Tool Rating Data in publication
24.01.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
VAPS1672 Adjustable Pipe Stands are portable and self-standing units that permit free pipe rotation. They are
designed for direct use with roll grooving tools: VE436MC, VE460 and 50T.
Capacities: 16 – 72”/400 – 1800 mm pipe †
Load Rating: 10000 lbs
Vertical Stroke: 17”/431.8 mm
Min. Pipe Height from Floor: 16”/DN400 on 72”/DN1800 pipe
Max. Pipe Height from Floor: 28”/DN700 on 16”/DN400 pipe
Tool Weight/
Shipping
Weight Rental Per Tool
Tool Model Part Number lb Month List Price
VAPS1672 R0001672PS 480 $8809.00 $31688.00
† Indicates pipe size capacity. For wall thickness capacity and general tool ratings see separate Tool Rating Data in publication
24.01.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
VE436MC Quick The VE436MC Quick Change Slide Conversion Kit includes an upper shaft and slide held in place by a
detent pin for improved efficiency. The kit also includes 4 – 12”/100 – 300 mm standard groove upper
Change Slide rolls, 14 – 24”/350 – 600 mm AGS groove upper rolls, pipe size, pipe rotation, guard setting labels, and
Conversion KIt guard setting pads (standard and AGS).
NOTE: Upper rolls only are included with the kit. Lower rolls can be purchased separately. Retain original
slide, shaft, set screws and roll grooving assembly for future use.
Kit Weight Kit
Conversion Kit Part Number lb List Price
VE436MC Quick Change Slide
R150436KIT 106 $14854.00
Conversion Kit
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
NOTE: The VE436MC tool has a maximum wall thickness range of up to .375”/9.5 mm
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
VG28GD PARTS
Pipe Size/
Type Type Tool Bit Marking Purchase
Pipe Groove inches | mm Part Number Price Each
2 – 3Z\x/50 – 90 Std. RK02280003 $489.50
Standard 4 – 6/100 – 150 Std. RK04280006 489.50
Steel (Aluminum 8/200 Std. RK08280008 489.50
Stainless and other IPS
Metallic) 2 – 3Z\x/50 – 90 ES RK02280Z03 489.50
EndSeal 4 – 6/100 – 150 ES RK04280Z06 489.50
8/200 ES RK08280Z08 489.50
AWWA # Cast and Standard (Rigid) 3 – 6/80 – 150 CIR * RK03280G06 951.00
Ductile Iron Flexible 3 – 6/80 – 150 CIF RK03280E06 951.00
2 – 3Z\x/50 – 90 RK02280S03 377.00
Stainless Steel SS 4 – 6/100 – 150 RK04280S06 419.00
8/200 RK08280S08 443.00
# Carbide Tipped Tool Bits supplied for grooving cast and ductile pipe have one edge not suitable for resharpening.
* Requires Special Cast Iron Rigid Pipe Stops (Part No. R-016-280-AVG [2 required]).
NOTE: Special urethane covered Idler Roll (Part No. R-033-281-AVG) recommended for grooving glass lined pipe.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
VG28GD-ABR The standard VG28GD tool can be equipped to provide grooving for lined piping systems susceptible to
abrasion. Parts for cut grooving for abrasive services are found in the parts required for abrasive systems
table. For details for abrasion grooving please refer to publication 25.03. The VG28GD tool is required for
use with VG28GD-ABR spare parts. These parts must be ordered separately for abrasive grooving services.
Capacities: 2 – 8”/50 – 200 mm carbon steel.
PARTS REQUIRED FOR ABRASIVE SYSTEMS
Pipe Size/
Type Tool Bit Marking
Pipe Part inches | mm Part Number Price Each
2 – 3Z\x/50 – 90 RK02280003 $489.50
Knives/Tool Bit 4 – 6/100 – 150 RK04285M06 828.50
Steel
8/200 RK08285M08 774.50
Stop Spacers † 2 – 8/50 – 200 R001285MCH 471.50
† Two Required
For tool rating capacity please reference publication 24.01.
Rubber Lining NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Pipe
Pipe Stop
VG26GD-COR
VG26GD-COR Includes tool set for grooving Schedule 40 or higher 2 – 6” MRL (machined for rubber lining) pipe. This
tool grooves pipe for abrasion and corrosion only. It is equipped with a shipping crate, operating
(Abrasion and instructions, tool bits, tool bit removal kit, 10” extension bar and depth stop adjusting tools
Corrosion) For details on abrasion, refer to publication 25.03 and for corrosion, refer to publication 25.10.
Capacities: 2 – 6”/50 – 150 mm carbon steel.
* NOTE: Victaulic Cut Grooving Tools require an external power source (see Power Mule in Pipe Preparation Tool Accessories).
** The VDG26GD is used to prepare pipe ends for Victaulic Style 808 Double Groove Couplings only.
For tool rating capacity please reference publication 24.01.
Pipe Size/
Type Tool Bit Marking
Pipe Part inches | mm Part Number Price Each
2 – 3Z\x/50 – 90 RK02280003 $489.50
Knives/Tool Bit 4 – 6/100 – 150 RK04285M06 828.50
Steel
8/200 RK08285M08 774.50
Stop Spacers † 2 – 8/50 – 200 R001285MCH 471.50
† Two Required
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
VDG26GD Includes tool set for grooving 6”/150 mm double groove standard carbon steel pipe. Also includes
crate, operation instructions, tool bits, tool bit removal kit, 10”/250 mm extension bar and depth stop
(Gear Drive)* adjusting tools.
Capacities: 6”/150 mm carbon steel
NOTE: For details on grooving pipe to be joined with Style 808 Double Groove Couplings, please refer to
publication 25.04.
Tool Weight/
Shipping
Weight Rental Tool
Tool Model Part Number lb Per Month List Price
VDG26GD ** R000284AVG 37/56 $5413.50 $40961.00
* NOTE: Victaulic Cut Grooving Tools require an external power source (see Power Mule in Pipe Preparation Tool Accessories).
** The VDG26GD is used to prepare pipe ends for Victaulic Style 808 Double Groove Couplings only.
For tool rating capacity please reference publication 24.01.
VDG26GD PARTS
Pipe Size/
Pipe Type Tool Bit Marking Part
Pipe Knife/Bit inches | mm Number Price Each
A 6/150 RK04284A06 $1312.00
Carbon Steel
B 6/150 RK04284B06 1312.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Tool Bit Arm
Pipe Stop
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
VG824 * Includes tool set for grooving 8 – 12” standard steel pipe, crate, operating instructions, tool bit removal
kit, wrench and one extra 8 – 24” standard groove steel pipe tool bit.
Capacities: 8 – 24” steel (and other IPS) and 8 – 24” cast and ductile iron pipe (Additional bits required)
Note: Tools bits and stops for D.I. are optional. See below.
Tool Weight/
Shipping
Weight Rental Tool
Tool Model Part Number lb Per Month List Price
VG824 R000824AVG 82/135 $4713.00 $52381.00
* NOTE: Victaulic Cut Grooving Tools require an external power source (see Power Mule in Pipe Preparation Tool Accessories).
For tool rating capacity please reference publication 24.01.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
VG824 PARTS
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
VG824-ABR The standard VG824 tool can be converted to cut groove pipe to MRL (machined for rubber lining)
dimensions to accept rubber lining for abrasion only services. Special tool bits, pipe end stop spacers,
(Abrasion Only) stop guide and pipe stop screw must be purchased separately. For details for abrasion grooving refer to
publication 25.03.
Note: The VG824 tool is required for use with VG824-ABR spare parts. These parts must be ordered
separately for abrasive grooving services.
VG824ABR PARTS
8 – 12" 14 – 16" 18 – 24" NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Tool Bit Tool Bit Tool Bit
1 2 3
6
7
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
VG824-COR Includes tool set to groove 8 – 24”/200 – 600 mm MRL (machined for rubber lining) pipe. This tool
grooves pipe for abrasion and corrosion only. It is equipped with a shipping crate, operating
(Abrasion and instructions, tool bits, tool bit removal kit, and depth stop adjusting tools. For details on MRL, refer to
Corrosion) publication 25.03. For details on MRL for Abrasion and Corrosion, refer to publication 25.10.
Capacities: 8 – 24”/200 – 600 mm carbon steel cor abrasion and corrosion
Tool Weight/
Shipping Weight Tool
Tool Model Part Number lb List Price
VG824-COR R000825AVG 82/126 $63378.50
For tool rating capacity please reference publication 24.01.
VG824-COR PARTS
Part
Item # Description Number Price Each
1 8 - 12”/200 - 300 B Tool Bit RK08825M12 $771.00
2 8 - 12”/200 - 300 mm G Tool Bit RK08824024 438.00
5 14 - 16”/350 - 400 mm RK14825M16 +
6 14 - 16”/350 - 400 mm RK14825N16 438.00
9 18 – 24”/450 – 600 mm B Tool Bit RK18825M24 771.00
10 18 – 24”/450 – 600 mm G Tool Bit RK18825N24 771.00
1 2 3 4
11 Center Pipe Stop R025824AVG 1949.00
13 † 14 – 24”/350 – 600 mm Pipe Stop R024824AVG 1021.00
5 6 7 8 9 10 † Two Required
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
Note: The Tool Bits are for the VG824-COR tool only. The VG824-COR is the only tool that can cut groove MRL pipe. Pipe stops
and center stops are the same for the VG824 cut grooving tool.
VG824DG
VG824DG Includes tool set to groove 8 – 12”/200 – 300 mm double groove on carbon steel pipe. Also includes
crate, operating instructions, tool bits, tool bit removal kit and depth stop adjusting tools.
Note: The VG824DG tool is used to fabricate pipe for the Victaulic Style 808 Double Groove Coupling.
Refer to publication 25.04 for grooving specifications.
Capacities: 8 – 12”/200 –300 mm carbon steel
Tool Weight/
Shipping
Weight Rental Tool
Tool Model Part Number lb Per Month List Price
VG824DG R000827AVG 82/126 $8401.50 $63378.50
For tool rating capacity please reference publication 24.01.
Pipe Pipe Stop VG824DG PARTS
Pipe Size/
Type Tool Bit Marking
Description Groove inches | mm Part Number Price Each
Tool Bit Arm 8 – 12/200 – 300 mm A RK08824024 $438.00
Knives/Tool Bits Double Groove
8 – 12/200 – 300 mm B RK08824024 438.00
VG824DG PARTS REQUIRED FOR ES GROOVES
Pipe Size/
Type Tool Bit Marking Part
Description Groove inches | mm Number Price Per Set of 2
Center Stop Double Groove 8 – 12/200 – 300 mm R076827HTR $1648.00
Stops † Double Groove 8 – 12/200 – 300 mm R074827HTR 993.00
† Two Required
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
VG828 Includes tool set for grooving 14”/350 mm standard carbon steel pipe, shipping crate, operating
instructions, tool bit removal kit, depth adjusting tools and one extra tool bit.
Note: The VG828 tool has been designed for cut grooving .500”/12.7 mm or heavier carbon steel pipe
14 – 24”/350 – 600 mm. Designed for AGS systems only.
Tool Weight/
Shipping
Weight Rental Tool
Tool Model Part Number lb Per Month List Price
VG828 R000828AVG 82/126 $8402.00 $59776.50
For tool rating capacity please reference publication 24.01.
VG828 PARTS
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
VG Vic-Groovers are designed for cut grooving a single size on standard size steel pipe. Vic-Groovers are
supplied with an extra tool bit and ratchet handle. 2”/50 mm and larger tools include a power yoke.
Refer to publication 24.01 Power yoke is available for C\v/20 mm and 1”/25 mm (Part. No. R0240030VG). 1Z\v/32 mm and 1Z\x”/40 mm
(Part No. R0240050VG) tools at $298.00 additional.
NOTE: Vic-Groovers not recommended for use with a hand-held power drive.
Pipe Standard or “ES” Tool Complete w/Yoke and Extra Tool Bit
Outside VG Tool Part Number
Size Diameter Weight Each
inches | mm inches lb Standard ES Price Each
C\v/20 1.050 11.0 R0000030VG – $2543.50
1/25 1.315 11.0 R0000040VG – 2543.50
1Z\v/32 1.660 12.0 R0000050VG – 2543.50
1Z\x/40 1.900 12.0 R0000060VG – 2543.50
2/50 2.375 12.0 R0000080VG R00E0080VG 2834.50
2Z\x/65 2.875 16.0 R0000100VG R00E0100VG 3553.00
3/80 3.500 16.0 R0000120VG R00E0120VG 3658.00
4/100 4.500 18.0 R0000160VG R00E0160VG 3982.00
5/125 5.563 25.0 R0000200VG – 5503.00
6/150 6.625 25.0 R0000240VG R00E0240VG 5503.00
8/200 8.625 45.0 R0000320VG R00E0320VG 5801.00
* Tools for Stainless Steel add $52.00 to the standard tool price.
NOTE: Standard Tool offering is for carbon steel and aluminum pipe only.
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
VG Vic-Groovers are designed for cut grooving a single size on standard size steel pipe. Vic-Groovers are
supplied with an extra tool bit and ratchet handle. 2”/50 mm and larger tools include a power yoke.
Refer to publication 24.01 Power yoke is available for C\v/20 mm and 1”/25 mm (Part. No. R0240030VG). 1Z\v/32 mm and 1Z\x”/40 mm
(Part No. R0240050VG) tools at $298.00 additional.
NOTE: Vic-Groovers not recommended for use with a hand-held power drive.
Pipe CPVC/PVC Tool Complete w/Yoke and Extra Tool Bit
Outside
Size Diameter Weight Each VG Tool Part
inches | mm inches lb Number Price Each
2/50 2.375 12.0 R00P008PVG $1060.00
2Z\x/65 2.875 16.0 R00P010PVG 1060.00
3/80 3.500 16.0 R00P012PVG 1060.00
4/100 4.500 18.0 R00P016PVG 1060.00
6/150 6.625 25.0 R00P024PVG 1272.00
8/200 8.625 45.0 R00P032PVG 1484.00
NOTE: Standard Tool offering is for carbon steel and aluminum pipe only.
Size CPVC/PVC
inches | mm Part Number Price Each
2/50 R067003PVG $311.00
2Z\x/65 R067003PVG 311.00
3/80 R067003PVG 311.00
4/100 R067014PVG 311.00
6/150 R067020PVG 477.00
8/200 R067032PVG 512.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
VG412 VG412 orbital grooving tool includes riser blocks and grooving heads for cut grooving 4 – 12” ductile iron
rigid groove. Power drive supplied requires 120 volt, 11.5 amp electrical supply. Stand included at no extra
charge.
Capacities: 4 – 12” ductile iron pipe
NOTE: Specifically designed for field closure pieces. Not suitable for production grooving.
Note: Tools bits and stops for D.I. are optional. See below.
Tool Weight/
Shipping
Weight Rental
Tool Model Part Number lb Per Month List Price
VG412 Orbital Grooving Tool R000412AVG 270/365 $5098.00 $61760.50
IPS Steel kit for cutting and grooving*
N003412034 – – 10205.50
(recommended only for lined steel pipe)
Optional flexible spacer blocks:
N220412667 – – 364.00
4 – 6” /100 – 150 mm
8” /200 mm N220412668 – – 392.50
10 – 12” /250 – 300 mm N220412669 – – 406.00 NR
* NOTE: Steel grooving kit can only be rented with rental tool.
For tool rating capacity please reference publication 24.01.
VG412 PARTS
Pipe Size
Type Knife Tool Bit Marking Purchase
Pipe Style inches | mm Part Number Price Each
Straight 4 – 6/100 – 150 N220412680 $636.00 NR
Angled 4 – 6/100 – 150 N220412568 636.00 NR
AWWA Cast and
Straight 8 – 12/200 – 300 N220412679 636.00 NR
Ductile Iron #
Angled 8 – 12/200 – 300 N220412569 636.00 NR
Solid Cut-Off Blade N275412055 197.50 NR
Straight 4 – 6/100 – 150 N220412678 498.50
Angled 4 – 6/100 – 150 N220412571 498.50
Angled 8/200 N220412572 498.50
Steel (and other IPS
Straight 8/200 N220412677 498.50
Metallic)
Angled 10 – 12/250 – 300 N220412570 498.50
Straight 10 – 12/250 – 300 N220412676 498.50
Solid Cut-Off Blade N275412055 197.50 NR
# Carbide Tipped Tool Bits supplied for grooving cast and ductile pipe have one edge not suitable for resharpening.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
NR
Non-returnable
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
VPG824
VPG824 Includes Tool with self-contained grooving motor (115/50) and tool bit for Schedule 40 – 80 PVC, crate,
operating instructions, and tool bit chuck wrench.
Capacities: 8 – 16”/200 – 400 mm Schedule 40 – 80 PVC and similar plastic pipe only
Tool Weight/
Shipping
Weight Rental
Tool Model Part Number lb Per Month List Price
VPG824 Cut Grooving Tool R000826VPG 47/53 $4926.00 $30255.00
Extra tool bits for 8”/200 mm standard
R025826MAC – – 625.00
plastic radius cut grooving
Extra tool bits for 10 – 16”/250 – 400
R023826MAC – – 902.00
mm standard plastic radius cut grooving
For tool rating capacity please reference publication 24.01.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
Size Part
Tool Model inches Description Number Price Each
CG3300 16 – 22 Cutoff Stepped Blade R111310022 $768.00
CG3300/CG3500 - 24-36 Blade 24 – 36 Cutoff Stepped Blade R111310036 794.00
CG3300/CG3500 16 – 36 Grooving Knife R151310MCH 914.00
ACCESSORIES
Part
Groove Confirmation Gauge Number Price Each
CG3300 R900330ASY $808.00
CG3500 R900350ASY 900.00
Style 926 Spigot Hole Spigot hole cut saw designed to cut 4”/DN100 and 6”/DN150 holes in HDPE pipe. For Style 926
Mechanical-T Spigots. For details on the Style 926 Mechanical-T Spigot outlet, refer to publication 11.07.
Saw for HDPE Pipe
Nominal Size Cutter Diameter Purchase
inches inches Part Number List Price Each
4 4.500 R040926HHS $598.50
6 6.625 R060926HHS 892.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
HCT908
HCT908 The HCT908 Hole Cutting Tool is a one-piece tool designed to cut holes up to 4Z\x” carbon and stainless
steel pipe. This allows for use of Mechanical-T, Strapless Outlet, Thermometer Outlet and Style 922 Outlet
Tee. Requires 110 volt power supply to operate. For sizes over 2C\v”/70 mm or when speed control is
needed for various materials, use the supplied inline speed controller to reduce hole saw wear and
improve performance.
Capacities: 1 – 2C\v”/25 – 70 mm holes for Z\x – 2Z\x”/15 – 76 mm Mechanical-Tconnections.
Tool Weight/
Shipping
Weight Rental Tool
Tool Model Part Number lb Per Month List Price
HCT908 R000908HCT 35/48 $1085.50 $4932.00
The 1” Arbor is optional. Hole saw blades available from Victaulic. See accessories below.
Accessories
Purchase
Part Name Part Number List Price
Arbor (Mandrel) R400900HCT $428.50
Arbor (1”/ 25.4 mm saw only) R450900HCT 606.50
Chuck Key Assembly R314900HCT 193.00
Levels NM14000006 119.50
Coupon Remover Assembly R050900HCT 91.00
Long Chain – For Strapless Outlet * R170900HCT 1549.50
* For use with VHCT900 to accommodate pipe sizes greater than 610.0 mm.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
Vic-Tap II * Parts A and B are designed for use with Vic-Tap II Mechanical-T units; (Part C) for tapping into systems
under pressure up to 500 psi.
Part “A” Includes drill guide base with extended shaft, arbor, pilot drill, 2C\,” hole saw, packing gland and
HP-70 Rigid Coupling for connection to Vic-Tap II.
Part “B” Includes drill motor with ground fault interrupt and clip-on feed wheel assembly.
Part “C” Vic-Tap II with 2Z\x” full port ball valve factory mounted. Available in sizes 4 x 2Z\x”, 5 x 2Z\x”, 6 x
2Z\x”, and 8 x 2Z\x”. Available for purchase only (parts not sold separately).
* Parts A & B can be purchased separately.
Shipping
Weight Rental
Tool Model Part Number lb Per Month List Price
Vic-Tap II - Parts A and B only R000902VT2 70 $6470.50 $14215.00
Part A only R100902VT2 – – 9696.50
Part B only R300901VT1 – – 9669.00
Part C †
4 x 2Z\x”/100 x 65 mm R016931010 – – 2850.00
5 x 2Z\x”/125 x 65 mm R020931010 – – 2850.00
6 x 2Z\x”/150 x 65 mm R024931010 – – 2850.00
8 x 2Z\x” /200 x 65 mm R032931010 – – 2850.00
NOTE: For this application, a ground fault interrupt MUST be used. Available for purchase at $1014.00. Part. No. N-E15-000-004.
NOTE: 40”/1016 mm minimum clearance is required for the Vic-Tap II.
† Part C available galvanized. Contact Victaulic for pricing and delivery.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
VCT2 – Automatic
VCT2 VCT2 Automatic is powered by a 120 VAC motor with SCR remote control. A steel guide rail is
recommended for cuts on vertical pipe (over 12”/300 mm diameter). Tools are supplied with one each
#00, #0, and #1 acetylene tips. Other tips are available for propane, MAPP and other gases. Tools are
supplied with tip cleaner and lighter.
Capacities: 6” – 24”/150 – 600 mm pipe *
Wall Thickness: 0.065” – 0.0500”/1.65 – 1.27 mm (with tips supplied)
Speed Control: SCR
Power Required: 120 VAC
Motor Rating: 15 W 10,000 rpm
NOTE: Guide rail is sold separately. Recommended for pipe 14”/350 mm and above.
Tool Weight/
Shipping Weight
Tool Model Part Number lb List Price
VCT2 R000912VCT 33/39 $15972.50
Guide Rail D-600 for up to 24”/600 mm
NC00170VC2 10 4207.50
pipe
* To increase capacity, a 40-inch chain is available for $636.00 (Part No. N-C00-002-VCT).
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Accessories
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
Cut and Mark Tool The PC3110 is a lightweight tool designed to work with a power drive. It simultaneously cuts the pipe,
marks the outside diameter of the pipe with insertion marks for proper installation of the QuickVic™ SD
with Chamfering Installation-Ready™ couplings and fittings, and chamfers the pipe end to remove any sharp edges.
Feature Capacity: 1/2 – 2”
Victaulic Part Approx. Wgt. Ea.
PC3110
Description Quantity Code lb Price Each
Refer to publication 34.01
PC3110 Cut & Mark Tool with Chamfering
Feature - Includes (1) hinge pin and (5) 1 R004311CNP 11.0 $343.50
replacement cutting wheels
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
Vic-Press™ Tool
PFT510 The Vic-Press tool for ASTM A-312 Schedule 10S stainless steel pipe arrives in 2 carrying cases and
includes:
Case 1 – PFT510 Vic-Press tool, 2 18V lithium ion batteries, 120 VAC charger, wire brush, 1 paint stick and 1
tube of lubricant
Case 2 – Z\x”/DN15, C\v”/DN20, and 1”/DN25 jaws, 1Z\x”/DN40 and 2”/DN50 ring-jaws, ring-jaw adapter jaw,
insertion gauge set
WARNING: The PFT510 Vic-Press tool is designed for use only with Vic-Press Schedule 10S system
couplings, valves and fittings. Do not attempt to install Schedule 5 Carbon Steel Press products with this
tool. Failure to follow this instruction could cause system failure resulting in serious personal injury and
property damage. Refer to TM-PFT510 for complete tool operating instructions.
Tool Weight/
Shipping
Weight Rental Tool
Tool Model Part Number lb # Per Month List Price
PFT510 Vic-Press™ Tool – 18V R120510PFS 102 $1762.50 $13384.00
# Weight is for tool and complete set of jaws.
Contact Victaulic for Replacement Gauge Kit (R000501SET) pricing and availability.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
Tool Weight/
Shipping
Weight Rental Tool
Tool Model Part Number lb Per Month List Price
Power Mule (External Power Source) –
R200700MUL 190/205 $4582.50 $28119.50
110V
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
PT100A Pocket sized Go/No-Go Grooved Pipe Diameter tapes are available for taking circumferential
measurements on pipe sizes C\v – 24”/20 – 600 mm. This diameter tape contains Go/No-Go markings on
one side for use with ANSI B36.19 and many ISO-4200 pipe sizes, and diameter markings to 100th of an
inch on the other side. Tapes are notched on the lead end to allow proper overlap within the groove for
more accurate measurement.
Tool Model Part Number Purchase Price
PT-100-A Imperial Go/No-Go Grooved
RW75-100-MCH $106.00
Pipe Diameter Tape Each
Box of 6 RW75-100-KIT 573.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
NOTICE
• Tape contains Go/No-Go markings on one side for use with C\v – 24”/20 – 600 mm pipe in ANSI B36.19
and many ISO-4200 sizes and is marked in 1/100th of an inch increments on the other side.
• The Go/No-Go side can be used to check cut or roll grooved pipe conformance to Victaulic original
and Machined for Rubber Lining (MRL) (C\v – 12”/20 – 300 mm) and Advanced Groove System (AGS)
(14 – 24”/350 – 600 mm) groove diameter specifications.
• Tapes are notched on the lead end to allow proper overlap within the groove for more accurate
measurement.
• The Go/No-Go side of the tape is not intended for use on sizes 76.1; 139.7; 165.1; 165.2; 216.3; 267.4; and
318.5 mm steel or stainless steel pipe sizes. For cast or ductile iron pipe sizes (up to 20”), copper tube
sizes, and the steel and stainless steel pipe sizes listed above, use the side of the tape marked in 0.01”
increments.
• The Go/No-Go pipe tape is a quick reference guide only. To ensure proper grooving dimensions,
always refer to the I-100 Victaulic Field Installation Handbook or to the latest groove specifications pub-
lications located on www.victaulic.com.
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
PT102A Go/No-Go pocket-sized AGS Pipe diameter tapes are available for taking circumferential measurements
on pipe sizes 8 – 72”/200 – 1800 mm.
Tool Model Part Number Purchase Price
PT102A AGS Go/No-Go Grooved Pipe
RW00102ASY $176.00
Diameter Tape
NOTICE
• Tape contains Go/No-Go markings on one side for use with Original Groove System sizes 8 – 12”/200 –
300 mm pipe and Advanced Groove System sizes 14 – 72”/300 – 1800 mm pipe in ANSI B36.10/B36.19
and many ISO-4200 sizes. In addition, the PT102 contains markings in 0.02”/0.5 mm increments on the
opposite side.
• The opposite side of the diameter tape can be used to check Victaulic original groove specifications in
14 – 42”/200 – 1050 mm pipe sized, including China pipe sizes and JIS specifications 8 – 12”/200 – 300
mm pipe sizes.
• The Go/No-Go pipe tape is a quick reference guide only, it is not a replacement for a calibrated diam-
eter measuring instrument. To ensure proper grooving dimensions, always refer to the I-PT102 Victaulic
Go/No-Go Pipe Diameter Tape Instructions Manual or to the latest groove specifications publications
located on www.victaulic.com.
GDC-CTS Go/No-Go pocket-sized groove diameter cables for 2-8” CTS Standard - Types K, L, M hard-drawn copper
tubing per ASTM B88 and drain-waste-vent (DWV) per ASTM B 306.
Model Part Number Purchase Price
GDC-CTS Go/No-Go Groove Diameter Cable R051GDCASY $48.00
GDC-PGS-300 Go/No-Go pocket-sized groove diameter cables for 2-12” CPVC and PVC Pipe.
Tool
Model Part Number List Price
GDC-PGS-300 Go/No-Go Groove Diameter Cable R155GDCASY $48.00
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
Tool Carry Bag Heavy duty tool carry bag for transporting Roll Grooving Tools, grooving rolls, and other tools. Carry bag
can accommodate up to 50 lbs.
Tool Weight/
Shipping Weight Tool
Tool Model Part Number lb List Price
Tool Carry Bag NM15000002 4/6 $191.50 NR
NR
Non-returnable
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
WARNING
• Always read and understand all operating and maintenance instructions before
attempting to use any Victaulic pipe preparation tools.Victaulic tool operating
and maintenance manuals can also be located at victaulic.com.
• Any Victaulic pipe preparation tools must be used by trained operators ONLY.
Operators that use Victaulic Pipe Cut-Off Tools must be knowledgeable in sound
welding and safety procedures.
Misuse of any equipment and lack of adherance to proper safety procedures may
result in serious personal injury, property damage, and/or product damage.
How To Order When ordering tools or tool parts, please include the following information:
A. PARTS ORDERS
1. Tool Model Number. Example: VE272SFS.
2. Tool Serial Number. The serial number can be found on the tool name plate.
3. Part Number and Description. Example: Part #09, R-201-261-0FS, Pump.
4. Where to send the part(s). Company Name, Address and Telephone Number
5. Attention: Person’s Name
6. Purchase Order Number. Order parts from the nearest Victaulic Sales Office. Consult victaulic.com for locations.
B. TOOL ORDERS
1. Tool Model Number. Example: VE416FSD.
2. Tool Description. Example: VE416FSD Roll Grooving Tool.
3. Where to send the tool. Company Name, Address and Telephone Number
4. Attention: Person’s Name
5. Purchase Order Number. Order tool from the nearest Victaulic Sales Office. Consult victaulic.com for locations.
C. TOOL RENTAL ORDER
1. A completed and signed tool rental agreement.
2. Purchase Order Number.
3. Tool Model Number. Example: VE272SFS
4. Tool Description. Example: VE272SFS Roll Grooving Tool.
5. Where to send the tool. Company Name, Address and Telephone
6. Attention: Person’s Name. Order tool from the nearest Victaulic Sales Office. Consult victaulic.com for locations.
NOTES:
Aluminum pipe must consist of 6061-T4 or 6063-T4 alloys for roll grooving.
PVC grades that can be grooved – PVC Type I Grade I – PVC 1120; PVC Type I Grade II – PVC 1220; PVC Type II Grade I – PVC 2116.
Copper/nickel pipe - contact Victaulic for details.
Light weight stainless steel pipe (Sch. 10S and Sch. 5S) must be grooved using stainless Rx and RWX roll sets.
Note: Roll grooving tools and rolls shown on this chart will produce grooves in accordance with Victaulic Roll Groove
Dimension charts and to ANSI/AWWA C-606 standards.
SPECIAL NOTE: All roll grooving tools will be stocked with standard rolls only. No substitution will be done.
Optional rolls are available at an additional cost.
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
WARRANTY
Standard product warranty applies. See Inside Back Cover.
NOTE: Reconditioned tools shall be warranted 30 days from date of purchase.
Terms and Conditions of Sale
No alteration, modification or waiver of these terms and conditions whether on Customer’s purchase order or otherwise shall be valid unless the altera-
tion, modification or waiver is specifically accepted in writing by an authorized representative of Victaulic.
Prices, Designs and Terms and Conditions of Sale are subject to change without notice.
TERMS OF PAYMENT: As stated on invoice. Maximum legal interest rate charged thereafter.
SHIPPING TERMS: F.O.B. shipping point (our option) freight prepaid and allowed on single orders (excluding No. 26/No. W26 Outlet Fittings and Series 387 Inline/
Series 388 End Suction Pump Skids) having a net price value of $12500 and over for shipment at one time to one destination into distributor stock or direct ship to a
project, as determined by Victaulic within the continental United States, excluding Alaska, Hawaii, Puerto Rico and U.S. possessions.
Shipping and handling charges on orders less than net price value of $12500, F.O.B. shipping point (our option) will be paid by the customer. The most economical
routing to recognized delivery points will be used, at our discretion. The cost of any special routing, packaging or handling that has been requested by the customer,
and is a deviation to our normal handling methods, will be added to the order and paid by the customer.
Shipments beyond the borders of the United States are prepaid and chargeable or collectable to final destination.
Orders are accepted subject to approval of our General Office and Credit Department at Easton, Pennsylvania, and contingent upon acts of God, war, civil
disturbance, strikes, labor difficulties, delays of carriers, inability to obtain materials, accidents or any other cause beyond our control.
Victaulic will endeavor to ship by the scheduled delivery date, but reserves the right to ship within a reasonable period thereafter. Under no circumstances shall
Victaulic be liable for damages of any kind, including but not limited to incidental or consequential damages for lost profits or lost sales or
liquidated damages, directly or indirectly arising from delays or failure to meet
shipping dates.
Orders, when accepted, cannot be cancelled without our written consent. No material will be taken back without our written consent. Orders for non-standard
(i.e. non-cancellable/non-returnable) material may not be cancelled nor will Victaulic accept return of such material for credit. Victaulic reserves the
right to change the designation of products from standard to non-standard and vice versa. This may be done at any time without notice, and
without incurring obligation. For further information
contact Victaulic.
All material is carefully examined, counted and packed by experienced employees. Claims for corrections must be made within 10 days of receipt of goods to the
Around the world and across diverse business lines, Victaulic provides durable pipe joining solutions that Customer Care center in Easton, PA (1-800-PICK VIC). We prove our count by weight. Claims for shortages are subject to that test. Our responsibility ceases when goods
are delivered to carrier in good condition and its receipt obtained. Carriers are responsible for goods lost, damaged or delayed in transit. For your own protection, have
solve the construction industry’s toughest challenges. transportation company’s agent verify damages, shortages or delays and note them on freight bill over his signature.
Since 1919, Victaulic’s innovative piping products and design services continue to increase construction productivity and WEIGHTS: All weights are approximate shipping weights and subject to change without notice.
reduce risk, ensuring projects are completed safely, on time and within budget. Victaulic maintains a continual policy of product improvement and, therefore, reserves the right to change product specifications, designs, and standard equipment
without notice and without incurring obligation.
With more than 40 international facilities, Victaulic helps customers in 140 countries succeed in the
2.0 LIMITED WARRANTY
Warranty, Victaulic Contact Information
FIRE PROTECTION | HVAC | PLUMBING | OIL & GAS | MINING | WATER & WASTEWATER | POWER GENERATION | MARITIME How Long Coverage Lasts: This warranty runs for one year from the date of delivery to the original buyer.
What is Not Covered: This warranty shall not apply to any product which has been subject to misuse, negligence, or accident (such as, without limitation,
exposure to incompatible chemical or corrosive agents including microbial corrosion), which has been repaired or altered in any manner outside of Victaulic’s factory,
or which has been used in a manner contrary to Victaulic’s instructions or recommendations. This warranty shall not apply to any Victaulic products utilizing
proprietary grooves (such as, but not limited to, the Victaulic AGSTM, IGSTM, or PGS-300TM grooves) which have been used on pipe that has been grooved to ANSI/
AWWA C-606 standards or which was grooved using tools not supplied by Victaulic or its licensees. Victaulic shall not be responsible for design errors due to
inaccurate or incomplete information supplied by Buyer or its representatives.
What Victaulic will do: Victaulic will repair or replace, at its option, any product that proves to be defective in materials or workmanship following an examination by
Victaulic that shows to its satisfaction the product was defective in materials or workmanship.
THIS LIMITED WARRANTY IS EXCLUSIVE AND MADE EXPRESSLY IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. THE BUYER’S SOLE AND EXCLUSIVE REMEDY SHALL BE FOR THE REPAIR OR REPLACEMENT OF DEFECTIVE
PRODUCTS AS PROVIDED HEREIN. THE BUYER AGREES THAT NO OTHER REMEDY (INCLUDING, BUT NOT LIMITED TO, INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR
LOST PROFITS, LOST SALES, INJURY TO PERSON OR PROPERTY OR ANY OTHER INCIDENTAL OR CONSEQUENTIAL LOSS) SHALL BE AVAILABLE.
Victaulic neither assumes nor authorizes any person to assume for it any other liability in connection with the sale of products.
victaulic.com Items purchased by Victaulic and resold will have the original equipment manufacturer’s warranty extended to Victaulic customers.
How to Get Service: Contact Victaulic at 610-559-3300 within one year after delivery to the original buyer to arrange for an examination of the product. You will be
© 2021 VICTAULIC COMPANY. ALL RIGHTS RESERVED.
asked to ship the product to Victaulic’s factory, postage and transportation charges prepaid, for examination. There is no charge for examination. Victaulic will examine
Source: skyscrapercenter.com and the Council on Tall Buildings and Urban Habitat
the product and contact you within a reasonable time regarding the results of that examination and to arrange for repair or replacement of any product determined
to be defective in materials or workmanship.
EFFECTIVE AUGUST 28, 2020
GENERAL GENERAL
PRICE LIST PRICE LIST