Portable Digital X-ray System / FUJI COMPUTED RADIOGRAPHY

FCR Go2
FCR-MB 201 Console
Service Manual

Document No. 014-238-01A

First Edition : Oct. 29, 2010

Printed in Japan
 Export Restrictions Applying to this Equipment

As this equipment falls under Foreign Exchange and Foreign Trade

Control Low of Japan, government approval obtained through due
procedure is required in order to export or otherwise remove such
models from Japan.

Note that the same export restrictions apply not only to the main unit
but also to after-sale parts, service manuals and service training (for
exporting or transferring technology) when such items are dispatched
or shipped to foreign countries and when service training is given for
trainees from foreign countries.

Precautions in Using the Service Manual

This manual should not be used by anyone other than the servicing staff
members qualified through the training specified by our company. Since
this manual contains confidential information including engineering know-
how related to product development, it is prohibited to distribute the manual
to users or to allow them free access to the manual without obtaining prior
permission from FUJIFILM Corporation.

This manual is intended to assist the service person in the safe and efficient
servicing of the equipment described.
The equipment must be used in accordance with the procedures contained in this
manual and must not be used for purposes other than those which are described
herein.

The equipment should only be used by persons having recognized qualifications

and, if relevant, having adequate training on this equipment, especially regarding
protective measure such as laser radiation protection.

It is the responsibility of the user to ensure that existing legal regulations regarding
installation of the building with respect to the equipment are observed. Moreover
the legal regulations regarding the operation of the equipment are to be observed.

Incorrect operation, or failure of the user to maintain the equipment in accordance

with the schedule of maintenance, relieves the manufacturer or his agent from all
responsibility for consequent non-compliance, damage, injury, defects and/or
other malfunction.

FCR is a trademark or registered trademark of FUJIFILM Corporation.

Copyright © 2010 FUJIFILM Corporation. All rights reserved.

No part of this publication may be reproduced, stored in a retrieval system, or transmitted

in any form or by means, electronic, mechanical, photocopying, recording or otherwise,
without the prior written permission of FUJIFILM Corporation.

014-238-01E
FCR-MB 201 Console Service Manual 10.29.2010 FM5797
 0.1

How to Use This Manual n Warning and Cautionary Information

Precautions during the service work are indicated by the following terms and
n Notes on the Use of the Service Manual symbols.

1. This document is intended to be read by the service personnel of FUJIFILM WARNING

Corporation or authorized agent who is commissioned by FUJIFILM
Corporation to perform servicing tasks. Serious injuries or death may result if this precaution is not observed.
Damage of the unit and customer database may also occur.
Under these circumstances, no one is allowed to perform the following
actions without the prior written permission from FUJIFILM Corporation.
Ÿ Duplicating or reproducing this document in whole or in part
uuCAUTIONuu
Ÿ Disclosing this document, in whole or in part, to a person other than the authorized
service personnel Mild or moderate injuries may result if this precaution is not observed.
Ÿ Lending or transferring this document, in whole or in part, to a third party Serious malfunction (which may be unrepairable or difficult to repair) may also
occur.
2. Due care must be exercised when handling this document because it
contains product internal structure descriptions and other confidential
information. ➤ IMPORTANT
* When the contents of this document need be changed, the information about such Abnormal equipment operations (easy to repair) may result if this precaution is not
changes will be conveyed using “Engineering Change Notice (ECN)”. observed.
The “Engineering Change Notice (ECN)” must also be handled using the same
care as for this document.
u NOTE u
3. Due to a product development schedule, the product specifications and
Indicates items which require particular attention during the necessary work procedure.
available options/variations prevailing at the time of the release of this
document may differ from the descriptions given in this document. In
such an instance, a Service Engineering Information will be issued as
➥ REFERENCE
needed to furnish latest information about inapplicable specifications and
components. Explanation of related items and terms.

4. If you have any doubt about the contents of this document or find errors,
contact your local FUJIFILM representative.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual 0.1
 0.2
n Servicing Instruments and Tools That Require Inspection/Calibration n Solid State Drive
The machine should be installed and serviced by use of servicing instruments and tools In this device, SSD (Solid State Drive: flash memory drive) is used as a storage device;
that have been regularly inspected and calibrated as appropriate. however, it is described as “hard disk” or “HDD” in this manual.
If the machine were serviced using servicing instruments and tools that have not been
inspected and calibrated, proper performance of the machine could not be guaranteed.
Servicing instruments and tools that require inspection/calibration are as listed below.
The inspection/calibration should be planned and performed in accordance with the
specifications and instruction manuals of the applicable servicing instruments and tools.

l Instruments and tools that require inspection/calibration

Name Inspection Calibration
Digital multimeter m m

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual 0.2
Contents (FCR-MB 201 Console Service Manual ) 0.3

FCR-MB 201 Console Service Manual Contents

Safety Precautions
1. Precautions for Operations......................................... Safety-1

2. Serial Number Label.................................................... Safety-3

3. Caution for Handling Personal Information............... Safety-3

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual 0.3
Contents (FCR-MB 201 Console Service Manual ) 0.4

Product Specifications
1. Specifications of FCR-MB 201 Console....................... Spec-1
1.1 Configurations........................................................................ Spec-1
1.2 Optional Item / Available Item Configurations........................ Spec-1
1.3 Dimensions/Weight................................................................ Spec-2
1.4 Equipment Disposal............................................................... Spec-2

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual 0.4
Contents (FCR-MB 201 Console Service Manual ) 0.5

Machine Troubleshooting (MT)

Appendix A CL Error Message Table....................... Appx MT A-1

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual 0.5
Contents (FCR-MB 201 Console Service Manual ) 0.6

Service Parts (SP)

1. Service Parts List............................................................... SP-1
1.1 How to Use Service Parts List....................................................SP-1
1.2 Service Parts List.......................................................................SP-3

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual 0.6
Contents (FCR-MB 201 Console Service Manual ) 0.7

Preventive Maintenance (PM)

1. Preventive Maintenance Items......................................... PM-1
3. Hardware Cleaning............................................................ PM-3
3.1 LCD Cleaning............................................................................ PM-3
4. Functional Checks............................................................ PM-4
4.1 Confirmation of Image Input to Storage onto HDD.................... PM-4
4.2 Image Output to Film................................................................. PM-4
4.3 Image Transfer.......................................................................... PM-4
5. Backup of Settings and Verification of
Date and Time.................................................................... PM-5
5.1 Backup of Setup Files............................................................... PM-5
5.2 Verification of Date and Time.................................................... PM-5

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual 0.7
Contents (FCR-MB 201 Console Service Manual ) 0.8

Installation (IN)
1. Installation Procedure Overview....................................... IN-1 4. Checkout Procedures....................................................... IN-23
4.1 Checking Connection Between CL and RU, CL and X-CON................. IN-23
2. CL Hardware Setup............................................................. IN-2
4.2 Checking the Data Exchange....................................................IN-24
2.1 Checking the Accessories...........................................................IN-2 4.3 Checking Output for Media........................................................IN-25
2.2 Installing the Available Items.......................................................IN-3 4.4 Checking the Connection between the CL and
2.3 Connecting to Other Equipment..................................................IN-3 Other Equipment.......................................................................IN-26
3. CL Software Setup.............................................................. IN-4 4.5 Checking the Output Image.......................................................IN-27
3.1 CL-AP Startup.............................................................................IN-4 5. Setup File Backup, Image Database Initialization and
3.1.1 OS Startup.............................................................................................. IN-5 Error Log Verification/Deletion........................................ IN-30
3.1.2 OS Setups............................................................................................... IN-6
3.1.3 Touch Panel Monitor Setups / Operational Verification........................... IN-7
5.1 Backing Up the CL Setup Files..................................................IN-31
3.1.4 Option Key Installation............................................................................ IN-8 5.2 Initializing Various Image Databases........................................IN-32
3.1.5 AP Key Installation.................................................................................. IN-9 5.2.1 Initializing Image Databases................................................................. IN-32
3.1.6 CL Startup Verification............................................................................ IN-9 5.2.2 Clearing the Image Output Queue........................................................ IN-33
3.2 Setup for the CL with the Service Utility....................................IN-10 5.2.3 Initializing the Patient Database............................................................ IN-33
3.2.1 Starting the Service Utility..................................................................... IN-10 5.3 Backing Up the RU Setup File...................................................IN-34
3.2.2 CL System Information Setup............................................................... IN-11 5.4 Verifying and Deleting the RU Error Log...................................IN-36
3.2.3 Optimizing the Monitor Display............................................................. IN-16 5.4.1 Verifying the RU Error Log.................................................................... IN-36
3.2.4 Changing the Menu Database.............................................................. IN-16 5.4.2 Deleting the RU Error Log..................................................................... IN-37
3.3 Setup for Addition of Descriptive Characters to Icons 5.5 Turning OFF the Mobile X-ray Unit............................................IN-37
[Applicable only in Japan]..........................................................IN-18
6. Connecting with On-Site Network................................... IN-38
3.4 CL Settings for Connection to Other Equipment.......................IN-18
3.5 Barcode Reader/Magnetic Card Reader Connection................IN-19 6.1 Wireless LAN Settings...............................................................IN-38
3.6 Setup for RU Connection..........................................................IN-20
3.6.1 Changing the CL IP Address................................................................. IN-20
3.6.2 Checking Setup with Service Utility...................................................... IN-21
3.6.3 RU Setup............................................................................................... IN-22

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual 0.8
Contents (FCR-MB 201 Console Service Manual ) 0.9

Installation – Appendix (Appx IN)

Appendix 1 Setting the Touch Panel.......................... Appx IN1-1 Appendix 5 Procedures for
Changing the CL and RU IP Addresses.... Appx IN5-1
Appendix 2 Setting the RU-Config............................. Appx IN2-1 1. Incorporating into the Network.............................. Appx IN5-1
2. Changing the Software Settings............................ Appx IN5-1
Appendix 3 Connecting the Barcode Reader
[Available Item]........................................ Appx IN3-1
Appendix 6 Changing the RU Host Name.................. Appx IN6-1
1. Connecting the Barcode Reader to the CL........... Appx IN3-1
2. Settings Required When Using the IP Barcode.... Appx IN3-4 Appendix 7 Changing the CL IP Address.................. Appx IN7-1
3. Settings Required When
Using the Study List Search Function Based on Appendix 8 Uninstalling the APs................................ Appx IN8-1
the Hospital Barcode.............................................. Appx IN3-5 1. CL-AP....................................................................... Appx IN8-2
3.1 Setting the Search Key.....................................................Appx IN3-5
3.2 Setting the Barcode Type.................................................Appx IN3-6 2. SQL Server............................................................... Appx IN8-3
3. Option Keys............................................................. Appx IN8-4
Appendix 4 Setting Up the Magnetic Card
4. Console Software (Built_inConsole)..................... Appx IN8-5
[Available Item]........................................ Appx IN4-1
5. FRIS Modules [Applicable only in Japan]............. Appx IN8-6
1. Connecting the CL to the Reader.......................... Appx IN4-1
6. Synapse Client Software
2. Setting the Reader and Magnetic Card................. Appx IN4-4 (Synapse Workstation)........................................... Appx IN8-7
3. Hospital Card Data Format Setup Example
[Reference].............................................................. Appx IN4-8
4. ID Card Data Format [Reference]......................... Appx IN4-12

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual 0.9
Contents (FCR-MB 201 Console Service Manual ) 0.10

Appendix 9 Changing the CL Host Name.................. Appx IN9-1

Appendix 10 Upgrading the AP................................... Appx IN10-1

Appendix 11 Setup for Security Enhancement......... Appx IN11-1

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual 0.10
Contents (FCR-MB 201 Console Service Manual ) 0.11

Performance Check (PC)

FCR-MB 201 Console Performance Checklist........................PC-1
FCR-MB 201 Console Config List............................................PC-2
1. IMAGE MODALITY................................................................... PC-2
2. QA FUNCTION.......................................................................... PC-3
3. PRINTER................................................................................... PC-3
4. CSL/IDT FUNCTION................................................................. PC-5
5. CONFIG OPTION...................................................................... PC-6
6. CONFIG QC.............................................................................. PC-6
FCR-MB 201 Console System Configuration List..................PC-7

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual 0.11
Contents (FCR-MB 201 Console Service Manual ) 0.12
BLANK PAGE

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual 0.12
 Control Sheet
Issue date Revision number Reason Pages affected
10.29.2010 01 New release (FM5797) All pages

FCR-MB 201 Console

Service Manual

Safety Precautions

014-238-01E FCR-MB 201 Console Service Manual

10.29.2010 FM5797
 Safety-1

1. Precautions for Operations uuCAUTIONuu

 The grounding wire must be connected.
n Precautions to be observed during operations  To avoid damages to the parts/units due to static discharge, use a wrist strap
putting one end on your wrist and the other end on the grounded section of the
To prevent danger to humans and serious accidents, observe the following. equipment, as illustrated below.
 When doing so, make sure to unplug the line cord plug to avoid electrical
WARNING hazards.
 Unless indicated otherwise, be sure to turn off the power switch before
maintenance work, and disconnect the power plug from the outlet.
Even if the power switch is OFF, 100 to 240VAC (differs according to machine Wrist strap
specifications) will still be supplied to the primary input terminal of the unit if the
power cable is connected, and this may result in possible electric hazards.
 As neckties, scarves, and necklaces may get caught in the unit during work,
remove these items or take precautions against such accidents.
 Never modify the unit unless otherwise specified.
Modification of the safety unit (interlock, breaker, temperature fuse, etc.) will
cause serious problems as it is not only dangerous but violates the related laws
and regulations.

00010003.EPS

 Before setting each kind of software, shut down applications except for the ones
specified in the procedures.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Safety-1
 Safety-2
n Safety Precautions (Control Unit)
Follow the precautions below when installing, using, and servicing the control unit (PC).
See the User’s Guide provided for details on the control unit.

l Electric hazard prevention :

The power cord of the control unit and CRT monitor uses a 3-pin plug. Connect it to a
properly grounded power outlet. When using an extension cord, use a 3-line type with
a grounding pin.

l Place of installation :
Avoid places where dust and foreign particles may enter inside through the computer
opening.Avoid installing near heaters and heat sources.

l Precautions when working on internal parts of the control unit :

(1) Turn off the power of the PC, CRT, and other peripheral devices.
(2) Disconnect the power cord from the outlet to prevent electric hazard.
(3) Open the I/O panel on the rear of the PC, touch the metallic part to fully
discharge body static electricity before accessing.
(4) When removing the board and memory module, etc., hold them without
directly touching the connectors and pins and place them in a static electricity
prevention package.

n Safety Precautions (LCD monitor)

WARNING
High voltage is applied inside the LCD monitor.
To prevent electric hazards and danger, the LCD internal parts cannot be accessed.
The CRT monitor does not consist of parts serviceable by the service engineer.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Safety-2
 Safety-3

2. Serial Number Label 3. Caution for Handling Personal Information

l Discarding the Equipment
When disposing of the FCR-MB 201 Console (PC), be sure to completely discard any
private information stored on it.

l When to Obtain and to Bring Out Personal Information

Follow the operating procedures under the Private Information Protection Law and
prescribed by your local FUJIFILM representative. When you collect logs, use such as
a security-ensured jig provided by your local FUJIFILM representative, and handle the
medium with adequate care.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Safety-3
 Control Sheet
Issue date Revision number Reason Pages affected
10.29.2010 01 New release (FM5797) All pages

FCR-MB 201 Console

Service Manual

Product Specifications

014-238-01E FCR-MB 201 Console Service Manual

10.29.2010 FM5797
 Spec-1

1. Specifications of FCR-MB 201 Console 1.2 Optional Item / Available Item Configurations
n Optional Item
1.1 Configurations
Product Code Description Q’ty Remarks
Product Code Description Q’ty Remarks DX CL DICOM PRINT DICOM print Key CD 1
IR MB201 CL A*-V* Control Unit 1 DX CL DICOM ORDER MWM DICOM worklist (MWM) Key CD 1
IR MB201 HUB UNIT A HUB Unit 1 DICOM worklist (MWM) Key CD
DX CL DICOM ID MWM 1
(only for patient information)
IR MB201 CL LCDA LCD Unit 1
This option can be used
only by combining it with “DX
DX CL DICOM MPPS DICOM PPS Key CD 1
CL DICOM ORDER MWM”
or “DX CL DICOM ID MWM
DX CL SHUTTER-PROC Shuttering Processing Key CD 1
Grid Pattern Removal processing
DX CL GPR 1
function Key CD
IR MB201 QC TEST SOFT Image Reader QC function Key CD 1
DX CL IM COMPOSITION Image composition Key CD 1
IR MB201 ANNOTATION
Annotation function Key CD 1
FOR LITE
IR MB201 DELUX-QA QA function addition Key CD 1
IR MB201 ID ONLINE ID Online function Key CD 1
DX CL RETAKE ANALYSIS Retake Analysis Key CD 1
DX CL DICOM COMMITMENT DICOM Commitment Push Key CD 1

n Available Item
Product Code Description Q’ty Remarks
IR 346 BARCODE NB Barcode Reader 1

IR 346 MCR ISO B Magnetic Card Reader (ISO) 1

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Spec-1
 Spec-2
1.3 Dimensions/Weight

Dimensions (height × width × depth) Weight

PC 92.6 × 314 × 340 (mm) Approx. 6.8 kg
LCD Unit 270 × 346 × 73 (mm) Approx. 3.8 kg

1.4 Equipment Disposal

When disposing of the CL, be sure to completely discard any private information stored
on it.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Spec-2
 Spec-3
BLANK PAGE

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Spec-3
 MT-I

FCR-MB 201 Console

Service Manual

Machine Troubleshooting (MT)

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual MT-I
 MT-II
Control Sheet
Issue date Revision number Reason Pages affected
10/29/2010 01 New release (FM5797) All pages

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual MT-II
Appendix A CL Error Message Table Appx MT A-1

Appendix A CL Error Message Table

Event Event Source Description Causes Remedies Remarks
10900 IIPInputEz %1 : Registry Value The acquisition/setup key or registration information is Check the registry key.
Get/Set Error%n abnormal.
[Key] %2%n
[Exp] %3%n
%4%n
%5
10901 IIPInputEz %1 : Database Connection This error is attributable to an abnormal character Check Directory.ini or database file name.
Error%n string in Directory.ini, an incorrect database file name,
[DB] %2%n or a damaged database.
[Exp] %3%n
%4%n
%5
10902 IIPInputEz %1 : Database Data This error is attributable to an abnormal database Check the database table/field name.
Get/Set Error%n acquisition/setup key or database.
[DB] %2%n
[Table] %3%n
[Field] %4%n
[Exp] %5
10903 IIPInputEz %1 : Dicom Data Object Get/Set The DDO acquisition/setup tag is abnormal. Check the DDO tag.
Error%n
[Tag] %2%n
[Exp] %3%n
%4%n
%5
10904 IIPInputEz %1 : Other Error%n [Procedure] Unknown error.
%2%n [ErrorCode] %3%n
[Exp] %4%n
%5
11900 IIPInputEz %1 : Registry Value The acquisition/setup key or registration information is Check the registry key.
Get/Set Error%n abnormal.
[Key] %2%n
[Exp] %3%n
%4%n
%5
11900 IIPPortable %1 : Registry Value Get/Set Error The registry was damaged. Restart. If the same symptom recurs, reinstall the
[Key] %2 system.
[Exp] %3
%4
%5

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-1
Appendix A CL Error Message Table Appx MT A-2
Event Event Source Description Causes Remedies Remarks
11901 IIPInputEz %1 : Database Connection This error is attributable to an abnormal character Check Directory.ini or database file name.
Error%n string in Directory.ini, an incorrect database file name,
[DB] %2%n or a damaged database.
[Exp] %3%n
%4%n
%5
11901 IIPPortable %1 : Database Connection Error Failed in accessing the image database. Restart. If the same symptom recurs, reinstall the
[DB] %2 system and perform “Initialization of image database”.
[Exp] %3 (Image data will be fully deleted.)
%4
%5
11902 IIPInputEz %1 : Database Data Get/Set This error is attributable to an abnormal acquisition/ Check the database table/field name.
Error%n setup key or database.
[DB] %2%n
[Table] %3%n
[Field] %4%n
[Exp] %5
11902 IIPPortable %1 : Database Data Get/Set Error Failed in accessing the image database. Restart. If the same symptom recurs, reinstall the
[DB] %2 system and perform “Initialization of image database”.
[Table]%3 (Image data will be fully deleted.)
[Field]%4
[Exp]%5
11903 IIPInputEz %1 : Dicom Data Object Get/Set The DDO acquisition/setup tag is abnormal. Check the DDO tag.
Error%n
[Tag] %2%n
[Exp] %3%n
%4%n
%5
11903 IIPPortable %1 : DDO Data Get/Set Error The DDO file was damaged. Restart. If the same symptom recurs, reinstall the
[Tag] %2 system and perform “Initialization of image database”.
%3 (Image data will be fully deleted.)
%4
%5
11904 IIPInputEz %1 : Other Error%n [Procedure] Unknown error.
%2%n [ErrorCode] %3%n
[Exp] %4%n
%5
11904 IIPPortable %1 : Other Error Program error or unstable system status. Check POCKET id Console connection status and
[Procedure] %2 restart. If the same symptom recurs, reinstall the
[Error Code]%3 system and perform “Initialization of image database”.
[Exp]%4 (Image data will be fully deleted.)
%5

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-2
Appendix A CL Error Message Table Appx MT A-3
Event Event Source Description Causes Remedies Remarks
12001 FF32 [%1] Failed in reading a bitmap file. Check to see if the filename is correct or available “%1”: Instance name
It failed in CreateFile(%2). It is conceivable that there was no such file, free disk hard disk space is sufficient. Proceed with processing. “%2”: Error code
%3 space was not sufficient or the system was unstable. “%3”: Bitmap file name/
Icon file name
12002 FF32 [%1] Failed in creating a file map object. Proceed with processing. “%1”: Instance name
It failed in CreateFileMapping(%2). It is conceivable that available resources were “%2”: Error code
%3 insufficient or the system was unstable. “%3”: Bitmap file name/
Icon file name
12003 FF32 [%1] Failed in mapping a file. It is conceivable that Proceed with processing. “%1”: Instance name
It failed in MapViewOfFile(%2). available resources were insufficient or the system “%2”: Error code
%3 was unstable. “%3”: Bitmap file name/
Icon file name
12004 FF32 [%1] Failed in creating a device context. Proceed with processing. “%1”: Instance name
It failed in CreateCompatibleDC. It is conceivable that available resources were “%2”: Error code
[%2] insufficient or the system was unstable.
12005 FF32 [%1] Failed in creating a DIB section. Proceed with processing. “%1”: Instance name
It failed in CreateDIBSection(%2). It is conceivable that available resources were “%2”: Error code
%3 insufficient or the system was unstable. “%3”: Bitmap file name/
Icon file name
12006 FF32 [%1] Failed in creating a bitmap picture object. Proceed with processing. “%1”: Instance name
It failed in It is conceivable that available resources were “%2”: Error code
OleCreatePictureIndirect(%2). insufficient or the system was unstable. “%3”: Bitmap file name/
%3 Icon file name
12008 FF32 [%1] Failed in reading an icon file. Check to see if the filename is correct or available “%1”: Instance name
It failed in Extract Icon. It is conceivable that there was no such file, free disk hard disk space is sufficient. Proceed with processing. “%2”: Error code
%2 space was not sufficient or the system was unstable.
12009 FF32 [%1] Failed in creating an picture object for an icon. It is Proceed with processing. “%1”: Instance name
It failed in conceivable that available resources were insufficient “%2”: Error code
OleCreatePictureIndirect(%2). or the system was unstable. “%3”: Bitmap file name/
%3 Icon file name
12011 FF32 [%1] The file path was illegal. Check to see if the filename is correct. Proceed with “%1”: Instance name
It is a filepath error. %2 processing. “%2”: Error code
12012 FF32 [%1] Failed in acquiring memory. Check to see if the filename is correct. Proceed with “%1”: Instance name
Memory allocation failed(%2). It is conceivable that available resources were processing. “%2”: Error code
%3 insufficient or the system was unstable. “%3”: Bitmap file name/
Icon file name
12014 FF32 [%1] An invalid input value was specified. Proceed with processing. “%1”: Instance name
(function name),
occurred error,
error code

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-3
Appendix A CL Error Message Table Appx MT A-4
Event Event Source Description Causes Remedies Remarks
12015 FF32 [%1] An invalid input value was specified. Proceed with processing. “%1”: Instance name
%2 (function name),
occurred error,
error code
“%2”: Error details
12016 FF32 [%1] An invalid input value was specified. Proceed with processing. “%1”: Instance name
%2 (function name),
%3 occurred error,
error code
“%2”: Error details (1/2)
“%3”: Error details (2/2)
12900 IIPInputEz %1 : Registry Value The acquisition/setup key or registration information is Check the registry key.
Get/Set Error%n abnormal.
[Key] %2%n
[Exp] %3%n
%4%n
%5
12900 IIPPortable %1 : Registry Value Get/Set Error A registry was damaged. Restart. If the same symptom recurs, reinstall the
[Key] %2 system.
[Exp] %3
%4
%5
12901 IIPInputEz %1 : Database Connection This error is attributable to an abnormal character Check Directory.ini or database file name.
Error%n string in Directory.ini, an incorrect database file name,
[DB] %2%n or a damaged database.
[Exp] %3%n
%4%n
%5
12901 IIPPortable %1 : Database Connection Error Failed in accessing the image database. Restart. If the same symptom recurs, reinstall the
[DB] %2 system and perform “Initialization of image database”.
[Exp] %3 (Image data will be fully deleted.)
%4
%5
12902 IIPInputEz %1 : Database Data This error is attributable to an abnormal acquisition/ Check the database table/field name.
Get/Set Error%n setup key or database.
[DB] %2%n
[Table] %3%n
[Field] %4%n
[Exp] %5
12902 IIPPortable %1 : Database Data Get/Set Error Failed in accessing the image database. Restart. If the same symptom recurs, reinstall the
[DB] %2 system and perform “Initialization of image database”.
[Table]%3 (Image data will be fully deleted.)
[Field]%4
[Exp]%5

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-4
Appendix A CL Error Message Table Appx MT A-5
Event Event Source Description Causes Remedies Remarks
12903 IIPInputEz %1 : Dicom Data Object The DDO acquisition/setup tag is abnormal. Check the DDO tag.
Get/Set Error%n
[Tag] %2%n
[Exp] %3%n
%4%n
%5
12903 IIPPortable %1 : DDO Data Get/Set Error The DDO file was damaged. Restart. If the same symptom recurs, reinstall the
[Tag] %2 system and perform “Initialization of image database”.
%3 (Image data will be fully deleted.)
%4
%5
12904 IIPInputEz %1 : Unknown Error%n Unknown error. Check the POCKET id Console connection status.
[Procedure] %2%n
[ErrorCode] %3%n
[Exp] %4%n
%5
12904 IIPPortable %1 : Other Error A general-purpose information event log. Check the POCKET id Console connection status.
[Procedure] %2
[Error Code]%3
[Exp]%4
%5
13000 FFIdDepartSelect It failed that [%1] connects The requesting department database was not found in Reinstall.
departDB the path indicated by the connection character string.
The requesting department table did not exist.
13000 FFIdFilmMark It failed that [%1] gets the The “Font” key was not found in the registry. Reinstall the IIP because the displayed characters
FontName can be corrupted.
13000 FFIdMenuChange It failed that [%1] gets the The “Font” key was not found in the registry. Reinstall the IIP because the displayed characters
FontName can be corrupted.
13000 FFIdMenuItem It failed that [%1] gets the The “Font” key was not found in the registry. Reinstall the IIP because the displayed characters
FontName can be corrupted.
13000 FFIdParamedicSelect It failed that [%1] connects The technician’s database was not found in the pass Reinstall.
paramedicDB indicated by the connection character string or the
technician's table did not exist.
13000 FFIdPatInfoInput It failed that [%1] gets the ID# The “LangStrDB” key was not found in Directory.ini Reinstall.
caption or the ID “30700” was not registered in the character
string database.
13001 FF32LIB Image Database Access Failure. The image database was not successfully accessed Restart.
ErrNo:%1 NativeErrNo:%2 (ADO error).
SQLState:%3 Source:%4
Description:%5

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-5
Appendix A CL Error Message Table Appx MT A-6
Event Event Source Description Causes Remedies Remarks
13001 FFCustomMsgBox MessageBox DataBase The message database was not successfully Reinstall or check whether the message database
Connection Error. connected. It is conceivable that the database did exists and the contents of Directory.ini are correct.
not exist or that the specified data source name was
invalid.
13001 FFCustomMsgBox MessageBox DataBase The connection to the message database was not Perform a reinstallation or check whether the
Connection Error. successfully established. message database exists and the contents of
[%1] The database did not exist or the specified data Directory.ini are correct.
source name was invalid.
13001 FFIdDepartSelect It failed that [%1] gets the The “LangStrDB” key was not found in Directory.ini Reinstall.
DepartLabel caption or the ID “30800” was not registered in the character
string database.
13001 FFIdFilmMark It failed that [%1] gets the The “FontSizeSS”/“FontSizeS”/“FontSizeM” Reinstall the IIP because the displayed characters
FontSize /“FontSizeL”/“FontSizeLL” key was not found in the can be corrupted.
registry.
13001 FFIdMenuChange It failed that [%1] gets the The “FontSizeSS”/“FontSizeS”/“FontSizeM” Reinstall the IIP because the displayed characters
FontSize /“FontSizeL”/“FontSizeLL” key was not found in the can be corrupted.
registry.
13001 FFIdMenuItem It failed that [%1] gets the The “FontSizeSS”/“FontSizeS”/“FontSizeM” Reinstall the IIP because the displayed characters
FontSize /“FontSizeL”/“FontSizeLL” key was not found in the can be corrupted.
registry.
13001 FFIdParamedicSelect It failed that [%1] gets the The “LangStrDB” key was not found in Directory.ini Reinstall.
ParamedicLabel caption or the ID “30800” was not registered in the character
string database.
13001 FFIdPatInfoInput It failed that [%1] gets the EXAM# The “LangStrDB” key was not found in Directory.ini Reinstall.
caption or the ID “30701” was not registered in the character
string database.
13001 FFIipInput It failed that [%1] gets the The “Font” key was not found in the registry. Reinstall the IIP because the displayed characters
FontName can be corrupted.
13001 FFImageDBCTL Image Database Access Error. The image database was not successfully accessed Restart.
ErroNo:%1 (ADO error).
Source:%2
Description:%3
13001 FFImageDBCTL Image Database Access Failure. The image database was not successfully accessed Restart.
ErrNo:%1 NativeErrNo:%2 (ADO error).
SQLState:%3 Source:%4
Description:%5
13001 FFIpcInf [%1] Initialization was unsuccessful. Restart. “%1”: Instance name
It failed in CoInitialize(%2). It is conceivable that the system was unstable. “%2”: Error code
13001 FFLogFile [%1] Log file creation was unsuccessful. Check for a free disk space or restart. “%1”: Instance name
It failed in CreateFile(%2). The problem might have been caused, for instance, “%2”: Error code
by an invalid filename selection, inadequate disk “%3”: File name/mutex
space, or system instability. name

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-6
Appendix A CL Error Message Table Appx MT A-7
Event Event Source Description Causes Remedies Remarks
13001 FF32LIB FF32lib Database Access Failed in accessing the database. Restart.
Failure.%nFunction:%1
Command:%2%nErrNo:%3
NativeErrNo:%4
SQLState:%5%n
Source:%6%n
Description:%7
13001 FFNetDB FFNetDB Database Access Failed in accessing the database. Restart.
Failure.%nFunction:%1
Command:%2%nErrNo:%3
NativeErrNo:%4
SQLState:%5%n
Source:%6%n
Description:%7
13002 FFCustomMsgBox MessageBox Data Get Error. The specified message was not databased. Perform a reinstallation or replace the message
It is conceivable that the message was not registered database with the latest one.
in the message database or that the specified ID was
incorrect (program defect).
13002 FFIdDepartSelect It failed that [%1] gets the The “Font” key was not found in the registry. Reinstall the IIP because the displayed characters
FontName can be corrupted.
13002 FFIdFilmMark It failed that [%1] gets the Clear The “LangStrDB” key was not found in Directory.ini Reinstall.
Caption or the ID “34800” was not registered in the character
string database.
13002 FFIdMcrControl Driver initialize error[%1] The magnetic card was not connected. Connect the magnetic card reader.
13002 FFIdMenuChange It failed that [%1] gets the The “Multibyte” key was not found in the registry. Reinstall.
multibyte flag
13002 FFIdMenuItem It failed that [%1] gets the The “Multibyte” key was not found in the registry. Reinstall.
multibyte flag
13002 FFIdParamedicSelect It failed that [%1] gets the The “Font” key was not found in the registry. Reinstall the IIP because the displayed characters
FontName can be corrupted.
13002 FFIdPatInfoInput It failed that [%1] gets the The “LangStrDB” key was not found in Directory.ini Reinstall.
PatNameSbcs caption or the ID “30702” was not registered in the character
string database.
13002 FFIdRuMainControl Driver initialize error[%1] The magnetic card reader was not connected. There are no operational problems.
13002 FFIipInput It failed that [%1] gets the The “FontSizeSS”/“FontSizeS”/“FontSizeM” Reinstall the IIP because the displayed characters
FontSize /“FontSizeL”/“FontSizeLL” key was not found in the can be corrupted.
registry.
13002 FFImageDBCTL [%1] The image database was not successfully accessed. Restart.
%2
13002 FFImageDBCTL Image Database Access Failure. The image database was not successfully accessed. Restart.
InstanceName[%1]%2

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-7
Appendix A CL Error Message Table Appx MT A-8
Event Event Source Description Causes Remedies Remarks
13002 FFIpcInf [%1] A log save control was not successfully created. Restart. If the same symptom recurs, perform a “%1”: Instance name
It failed in CoCreateInstance(%2). The problem is attributable to system instability or reinstallation. “%2”: Error code
LogFileCom create failure. unregistered control.
13002 FFLogFile [%1] File map object creation was unsuccessful. Restart. “%1”: Instance name
It failed in CreateFileMapping(%2). The problem is attributable to resource inadequacy or “%2”: Error code
system instability.
13002 FF32LIB FF32lib Database Access Failure. Failed in accessing the database. Restart.
InstanceName[%1]%n%2%nFunct
ion:%3 Command:%4
13002 FFNetDB FFNetDB Database Access Failed in accessing the database. Restart.
Failure.
InstanceName[%1]%n%2%nFunct
ion:%3 Command:%4
13003 FF32LIB Image Database Access Failure. The image database was not successfully accessed. Restart.
InstanceName[%1]%2
%3
13003 FFCustomMsgBox Same MessageBox Existed. The specified message box is already open. Close the message box.
[%1]
13003 FFIdDepartSelect It failed that [%1] gets the The “FontSizeSS”/“FontSizeS”/“FontSizeM” Reinstall the IIP because the displayed characters
FontSize /“FontSizeL”/“FontSizeLL” key was not found in the can be corrupted.
registry.
13003 FFIdFilmMark It failed that [%1] gets the The “LangStrDB” key was not found in Directory.ini. Reinstall.
connection string of strDB
13003 FFIdMenuChange [%1] failed in the initialization for The “DisplayDataDB” key was not found in Directory. Reinstall.
the display group data acquisition ini or the connection character string was not properly
registered in the display group table.
13003 FFIdMenuItem Image Folder Path Get Error The “Bitmap” key was not found in Directory.ini. Reinstall.
13003 FFIdParamedicSelect It failed that [%1] gets the The “FontSizeSS”/“FontSizeS”/“FontSizeM” Reinstall the IIP because the displayed characters
FontSize /“FontSizeL”/“FontSizeLL” key was not found in the can be corrupted.
registry.
13003 FFIdPatInfoInput It failed that [%1] gets the The “LangStrDB” key was not found in Directory.ini Reinstall.
PatNameDbcs caption or the ID “30703” was not registered in the character
string database.
13003 FFIipInput It failed that [%1] gets the The “Multibyte” key was not found in the registry. Reinstall.
multibyte flag
13003 FFImageDBCTL [%1] The image database was not successfully accessed. Restart.
%2
%3
13003 FFImageDBCTL Image Database Access Failure. The image database was not successfully accessed. Restart.
InstanceName[%1]%2%3

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-8
Appendix A CL Error Message Table Appx MT A-9
Event Event Source Description Causes Remedies Remarks
13003 FFIpcInf [%1] Memory allocation was not successfully achieved for Restart. “%1”: Instance name
Memory allocation failed. main thread creation.
The problem is attributable to resource inadequacy or
system instability.
13003 FFLogFile [%1] File mapping was unsuccessful. Restart. “%1”: Instance name
It failed in MapViewOfFile(%2). The problem is attributable to resource inadequacy or “%2”: Error code
system instability.
13003 FF32LIB FF32lib Database Access Failure. Failed in accessing the database. Restart. “%1”: Instance name
InstanceName[%1]%n%2 “%2”: Error code
%n%3
13003 FFNetDB FFNetDB Database Access Failed in accessing the database. Restart. “%1”: Instance name
Failure. “%2”: Error code
InstanceName[%1]%n%2
%n%3
13004 FFCustomMsgBox MessageBox Dialog Create Error. The message box could not be created. Restart.
[%1] This error occurred due to insufficient resources or
system instability.
13004 FFIdDepartSelect It failed that [%1] gets the depart The “FieldDepartList” key was not found in the system Reinstall.
field list setup database.
13004 FFIdFilmMark It failed that [%1] connects to The connection character string was not properly Reinstall.
strDB registered for the “LangStrDB” key in Directory.ini.
13004 FFIdMcrControl Magnetic card data acquisition The magnetic card was found damaged. Have a normal magnetic card be read.
error[%1]
13004 FFIdMenuChange [%1] failed in the display group The “DisplayDataDB” key was not found in Directory. Reinstall.
data acquisition ini or the connection character string was not properly
registered in the display group table.
13004 FFIdMenuItem [Miss]Image Get Error Id_MissExposure_I.bmp was not found in the path to Reinstall the IIP because the button cannot be
an image folder or the image format was illegal. displayed normally.
13004 FFIdParamedicSelect It failed that [%1] gets the The “FieldParamedicList” key was not found in the Reinstall.
paramedic field list system setup database.
13004 FFIdPatInfoInput It failed that [%1] gets the Sex The “LangStrDB” key was not found in Directory.ini Reinstall.
caption or the ID “30704” was not registered in the character
string database.
13004 FFIdRuMainControl Magnetic card data acquisition The magnetic card is damaged. Have a normal magnetic card be read.
error[%1]
13004 FFIipInput It failed that [%1] gets the The “LangStrDB” key was not found in Directory.ini. Reinstall.
connection string of STR DB
13004 FFIpcInf [%1] A pipe has already been An attempt was made to duplicate a pipe. There are no operational problems. “%1”: Instance name
made(%2). “%2”: Error code

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-9
Appendix A CL Error Message Table Appx MT A-10
Event Event Source Description Causes Remedies Remarks
13004 FFLogFile [%1] It failed in CreateMutex(%2). Mutex creation was unsuccessful. Restart. “%1”: Instance name
%3 The problem is attributable to resource inadequacy or “%2”: Error code
system instability. “%3”: file name/mutex
name
13005 FFCustomMsgBox MessageBox Dialog Show Error. The message box could not be opened. Restart.
[%1] This error occurred due to insufficient resources or
system instability.
13005 FFIdConnectionWatch EX Recv Error The connection to the RU was closed or a connection Restore the RU connection to normal.
Message [%1] Error Code [%2] error occurred.
13005 FFIdFilmMark It failed that [%1] gets the The “FilmMarkDB” key was not found in Directory.ini. Reinstall.
connection string of FilmMarkDB
13005 FFldMcrControl Magnetic card variation error[%1] The magnetic card was not of the specified type. Have the specified type of magnetic card be read.
13005 FFIdMenuChange [%1] failed in the liberating The connection to the display group table was not Restart. If the same symptom recurs, reinstall.
processing of the display group successfully closed.
data acquisition
13005 FFIdPatInfoInput It failed that [%1] gets the SexMale The “LangStrDB” key was not found in Directory.ini Reinstall.
caption or the ID “30705” was not registered in the character
string database.
13005 FFIdRuMainControl Magnetic card variation error[%1] The employed magnetic card type was different than Have the specified type of magnetic card be read.
specified.
13005 FFIdRuMainControl Recv error[%1] The connection to the RU was closed or an error Check the connection to the RU.
occurred in the connection.
13005 FFIdRUMainControlEx Recv Error The connection to the RU was closed or a connection Restore the RU connection to normal.
Message [%1] Error Code [%2] error occurred.
13005 FFIipInput It failed that [%1] connects to STR The connection character string was not properly Reinstall.
DB registered for the “LangStrDB” key in Directory.ini.
13005 FFIpcInf [%1] Main thread creation was not successful. Restart. “%1”: Instance name
It failed in _beginthread(%2). The problem is attributable to resource inadequacy or “%2”: Error code
system instability.
13006 FFCustomMsgBox List For Modeless MessageBox The modeless message box management table was Restart.
Management New Error. not successfully created.
The problem is attributable to resource inadequacy or
system instability.
13006 FFCustomMsgBox List For Modeless MessageBox The modeless message box management table was Restart.
Management New Error. not successfully created.
[%1] This error occurred due to insufficient resources or
system instability.
13006 FFIdFilmMark It failed that [%1] connects to The connection character string was not properly Reinstall.
FilmMarkDB registered for the “FilmMarkDB” key in Directory.ini.
13006 FFIdMcrControl Magnetic card variation check The card format was incorrect or an attempt was Have the specified hospital card be read.
error[%1] made to read an unspecified hospital card.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-10
Appendix A CL Error Message Table Appx MT A-11
Event Event Source Description Causes Remedies Remarks
13006 FFIdMenuChange [%1] Failed in the initialization for The “DisplayDataDB” key was not found in Directory. Reinstall.
the display menu data acquisition ini.
13006 FFIdPatInfoInput It failed that [%1] gets the The “LangStrDB” key was not found in Directory.ini Reinstall.
SexFemale caption or the ID “30706” was not registered in the character
string database.
13006 FFIdRuMainControl Magnetic card variation check The card format was wrong or an attempt was made Have the specified hospital card be read.
error[%1] to cause an unspecified hospital card to be read.
13006 FFIipInput It failed that [%1] gets the The “SysConfigDB“ key was not found in Directory.ini. Reinstall.
connection string of SYS DB
13006 FFIpcInf [%1] It failed in The specified pipe was not successfully connected. Make a change so as to let the program initiate a “%1”: Instance name
WaitNamedPipe(%2). It is conceivable that the pipe was not created or was retransmission, or restart. “%2”: Error code
unconnectable or that the system was unstable.
13007 FFIdDepartSelect It failed that [%1] gets the The “LangStrDB” key was not found in Directory.ini. Reinstall.
connection string of strDB
13007 FFIdMcrControl DataFormatDB access error[%1] “McrDataFormatDB” key was not found in Directory.ini Reinstall.
or McrDataFormat.mdb did not exist in the specified
path.
13007 FFIdMenuChange [%1] failed in the acquisition of The connection character string was not properly Reinstall.
number of records of display menu registered in the display group table.
data
13007 FFIdParamedicSelect It failed that [%1] gets the The “LangStrDB” key was not found in Directory.ini. Reinstall.
connection string of strDB
13007 FFIdPatInfoInput It failed that [%1] gets the The “LangStrDB” key was not found in Directory.ini Reinstall.
SexOther caption or the ID “30707” was not registered in the character
string database.
13007 FFIdRuMainControl DataFormatDB access error[%1] The “McrDataFormatDB” key was not found in Reinstall.
Directory.ini or McrDataFormat.mdb did not exist in
the path.
13007 FFIipInput It failed that [%1] connects to SYS The connection character string was not properly Reinstall.
DB registered for the “SysConfigDB“ key in Directory.ini.
13007 FFIpcInf [%1] The specified pipe was not successfully connected. The problem is attributable to the program. Check the “%1”: Instance name
It failed in CreateFile(%2). It is conceivable that the pipe was closed or that the program or restart. “%2”: Error code
system was unstable.
13007 FFIpcInf [%1] The connection to the specified pipe was not The problem is attributable to the program. Check the
It failed in CreateFile(%2). [Send established. This error occurred because the pipe was program or restart.
Msg:%3] closed or the system was unstable.
13008 FFCustomMsgBox An exception error occurred. An exception occurred (the system was unstable). Restart.
[%1]
%2
13008 FFIdConnectionWatch Ex Message Send Error [%1] Error A connection error occurred. Restore the RU connection to normal.
Code [%2]

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-11
Appendix A CL Error Message Table Appx MT A-12
Event Event Source Description Causes Remedies Remarks
13008 FFIdDepartSelect It failed that [%1] connects to The connection character string was not properly Reinstall.
strDB registered for the “LangStrDB” key in Directory.ini.
13008 FFIdFilmMark It failed that [%1] get the folder The “Bitmap” key was not found in Directory.ini. Reinstall.
path to Bitmap
13008 FFIdMenuChange [%1] failed in the display menu Not properly registered to the display group table. Reinstall.
data acquisition
13008 FFIdParamedicSelect It failed that [%1] connects to The connection character string was not properly Reinstall.
strDB registered for the “LangStrDB” key in Directory.ini.
13008 FFIdPatInfoInput It failed that [%1] gets the The “LangStrDB” key was not found in Directory.ini Reinstall.
DateOfBirth caption or the ID “30708” was not registered in the character
string database.
13008 FFIdRuMainControl DataFormatDB close error[%1] The database was faulty. Reinstall.
13008 FFIdRUMainControlEx Message Send Error [%1] A connection error occurred. Restore the RU connection to normal.
WSAGetLastError = [%2]
13008 FFIipInput It failed that [%1] calls the The message database did not exist or the program Reinstall.
CUSTOM MESSAGE BOX (%2) was faulty.
13008 FFIpcInf [%1] A message was not successfully transmitted. It is The problem is attributable to the program. Check the “%1”: Instance name
It failed in WriteFile(%2). conceivable that the pipe was closed or that the program or restart. “%2”: Error code
system was unstable.
13008 FFIpcInf [%1] The message transmission was not successfully It is conceivable that the program may be faulty.
It failed in WriteFile(%2). [Send completed. This error occurred due to a closed pipe Check the program or restart.
Msg:%3] or system instability.
13009 FFCustomMsgBox Common function error occurred. The common function returned an error. Restart.
[%1]
%2
13009 FFIdConnectionWatch LogFile Name Make The “Log” key was not found in Directory.ini. Reinstall.
error(%1).%n[%2]
13009 FFIdConnectionWatchEx Log File Name Make Error[%1] The “Log” key was not found in Directory.ini. Register the “Log” key in Directory.ini.
Error Code [%2]
13009 FFIdDepartSelect It failed that [%1] gets the The “SysConfigDB” key was not found in Directory.ini. Reinstall.
connection string of sysDB
13009 FFIdFilmMark It failed that [%1] get the bitmap to Id_UpScroll_U.bmp/“Id_UpScroll_D.bmp”/ Reinstall the IIP because the button cannot be
Previous Page “Id_UpScroll_X.bmp” was not found in the path to an displayed normally.
image folder or the image format was illegal.
13009 FFIdMcrControl DataFormatDB close error[%1] The database was faulty. Reinstall.
13009 FFIdMenuChange [%1] Failed in the liberating The connection to the display menu table was not Restart. If the problem frequently occurs, initialize the
processing of the display menu successfully closed. image database.
data acquisition
13009 FFIdParamedicSelect Is failed that [%1] gets the The “SysConfigDB” key was not found in Directory.ini. Reinstall.
connection string of sysDB

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-12
Appendix A CL Error Message Table Appx MT A-13
Event Event Source Description Causes Remedies Remarks
13009 FFIdPatInfoInput It failed that [%1] gets the The “Font” key was not found in the registry. Reinstall the IIP because the displayed characters
FontName can be corrupted.
13009 FFIdRuMainControl LogFile Name Make error[%1] The “Log” key was not found in Directory.ini. Reinstall.
13009 FFIdRUMainControlEx Log File Name Make Error[%1] The “Log” key was not found in Directory.ini. Register the “Log” key in Directory.ini.
Error Code [%2]
13009 FFIpcInf [%1] Memory allocation was not successfully achieved for Restart. “%1”: Instance name
Memory allocation failed. reception thread creation. “%2”: Error code
The problem is attributable to resource inadequacy or
system instability.
13010 FFIdConnectionWatch DB Connect error(%1).%n[%2] The “SysConfigDB” key was not found in Directory.ini Reinstall.
or SysConfig.mdb did not exist in the path.
13010 FFIdConnectionWatchEx DB Connect Error [%1] Error Code “SysConfigDB” key was not found in Directory.ini or Properly register the “SysConfigDB” key in Directory.
[%2] SysConfig.mdb did not exist in the specified path. ini.
13010 FFIdDepartSelect It failed that [%1] connects to The connection character string was not properly Reinstall.
sysDB registered for the “SysConfigDB” key in Directory.ini.
13010 FFIdFilmMark It failed that [%1] get the bitmap to Id_DownScroll_U.bmp/“Id_DownScroll_D.bmp” Reinstall the IIP because the button cannot be
Next Page /“Id_DownScroll_X.bmp” was not found in the path to displayed normally.
an image folder or the image format was illegal.
13010 FFIdMcrControl Patient info data error[%1] %n(%2) The patient information contained in the magnetic Check the data contained in the magnetic card.
card was incorrect.
13010 FFIdMenuChange [%1] Failed in the termination of The connection to the display menu table was not Restart. If the problem frequently occurs, initialize the
the display menu data acquisition successfully closed. image database.
13010 FFIdParamedicSelect It failed that [%1] connects to The connection character string was not properly Reinstall.
sysDB registered for the “SysConfigDB” key in Directory.ini.
13010 FFIdPatInfoInput It failed that [%1] gets the The “FontSizeSS”/“FontSizeS”/“FontSizeM” Reinstall the IIP because the displayed characters
FontSize /“FontSizeL”/“FontSizeLL” key was not found in the can be corrupted.
registry.
13010 FFIdRuMainControl DB Connect error[%1] The “SysConfigDB” key was not found in Directory.ini Reinstall.
or SysConfig.mdb did not exist in the path.
13010 FFIdRuMainControl Patient info data error[%1] The patient information carried by the magnetic card Check the data stored in the magnetic card.
was incorrect.
13010 FFIdRUMainControlEx DB Connect Error “SysConfigDB” key was not found in Directory.ini or Properly register the “SysConfigDB” key in Directory.
[%1] Error Code [%2] SysConfig.mdb did not exist in the specified path. ini.
13010 FFIpcInf [%1] Pipe creation was not successful. Restart. “%1”: Instance name
It failed in CreateNamedPipe(%2). It is conceivable that the system was unstable. “%2”: Error code
13010 FFIpcInf [%1] It failed in The pipe was not successfully created. Restart.
CreateNamedPipe(%2). [Pipe:%3] The system was unstable.
13011 FFIdConnectionWatch DB Read The “EchoInterval”, “ComBreakTimeout1” Reinstall.
error(%1).%n[%2] “PartFrupStatus”, or “EnableLog FrupConnect” key
was not found in SysConfig.mdb.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-13
Appendix A CL Error Message Table Appx MT A-14
Event Event Source Description Causes Remedies Remarks
13011 FFIdConnectionWatchEx DB Read error[%1] The “EchoInterval”, “ComBreakTimeout1” Ensure that the “EchoInterval”, “ComBreakTimeout1”,
Error Code [%2] “PortFrupStatus”, or “EnableLogFrupConnect” key “PortFrupStatus”, and “EnableLogFrupConnect” keys
was not found in SysConfig.mdb. are all registered in SysConfig.mdb.
13011 FFIdDepartSelect It's failed that [%1] gets the DepartDB did not exist in Directory.ini. Reinstall.
connection string of departDB
13011 FFIdFilmMark It failed that [%1] get the bitmap to Id_Clear_U.bmp/“Id_Clear_D.bmp”/“Id_Clear_ X.bmp” Reinstall the IIP because the button cannot be
Clear was not found in the path to an image folder or the displayed normally.
image format was illegal.
13011 FFIdParamedicSelect It failed that [%1] gets the ParamedicDB did not exist in Directory.ini. Reinstall.
connection string of paramedicDB
13011 FFIdPatInfoInput It failed that [%1] gets the max The “IdLength” key was not found in the system setup Reinstall.
length of ID# database.
13011 FFIdRuMainControl DB Read error[%1] The “PortFrupMain”, “AckTimeout”, or Reinstall.
“EnableLogFrupMain” key was not found in
SysConfig.mdb.
13011 FFIdRUMainControlEx DB Read error[%1] The “PortFrupMain”, “AckTimeout”, or Ensure that the “PortFrupMain”, “AckTimeout”, and
Error Code [%2] “EnableLogFrupMain” key was not found in “EnableLogFrupMain” keys are all registered in
SysConfig.mdb. SysConfig.mdb.
13011 FFIipInput It failed that [%1] gets the window The “ScallHight”/“ScallWidth” key was not registered Reinstall.
size in the registry.
13011 FFIpcInf [%1] Pipe connection was not successfully awaited. It is Restart. “%1”: Instance name
It failed in conceivable that the system was unstable. “%2”: Error code
ConnectNamedPipe(%2).
13011 FFIpcInf [%1] The pipe connection request was not successfully Restart.
It failed in enqueued. The system was unstable.
ConnectNamedPipe(%2).
[Pipe:%3]
13011 FFCustomMsgBox ActiveX Data Objects(ADO) Error. An ADO error was detected. Restart.
ErrorNo:%1
Source:%2
Description:%3
13012 FFIdPatInfoInput It failed that [%1] gets the max The “ExaminationNoLength” key was not found in the Reinstall.
length of EXAM# system setup database.
13012 FFIpcInf [%1] Reception thread creation was not successful. The Restart. “%1”: Instance name
It failed in _beginthread(%2). problem is attributable to resource inadequacy or “%2”: Error code
system instability.
13012 FFIpcInf [%1] The reception thread was not successfully created. Restart.
It failed in _beginthread(%2). This error occurred due to insufficient resources or
[Pipe:%3] system instability.
13013 FFIdMenuChange It failed that [%1] get the folder The “Bitmap” key was not found in Directory.ini. Reinstall.
path to Bitmap

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-14
Appendix A CL Error Message Table Appx MT A-15
Event Event Source Description Causes Remedies Remarks
13013 FFIdPatInfoInput It failed that [%1] gets the padding The “IdPadding” key was not found in the system Reinstall.
type of ID# setup database.
13013 FFIdRUMainControlEx Configration error[%1] SysConfig.mdb was abnormal.
WSAGetLastError = [%2]
13013 FFIpcInf [%1] Message reception was not successful. Restart. “%1”: Instance name
It failed in ReadFile(%2). It is conceivable that the system was unstable. “%2”: Error code
13013 FFIpcInf [%1] The message reception was not successfully Restart.
It failed in ReadFile(%2). [Pipe:%3] completed. The system was unstable.
13014 FFIdConnectionWatch Ack Messeage Time The connection to the RU was closed or an error Check the connection to the RU.
Out(%1).%n[%2] occurred in the connection.
13014 FFIdConnectionWatchEx Ack Message Time The connection to the RU was closed or a connection Restore the RU connection to normal.
Out[%1] error occurred.
Error Code [%2]
13014 FFIdMenuChange It failed that [%1] get the bitmap to Id_PrevPage_U.bmp/“Id_PrevPage_ D.bmp”/“Id Reinstall the IIP because the button cannot be
Previous Page _PrevPage_X.bmp” was not found in the path to an displayed normally.
image folder or the image format was illegal.
13014 FFIdPatInfoInput It failed that [%1] gets the padding The “ExaminationNoPadding” key was not found in Reinstall.
type of EXAM# the system setup database.
13014 FFIdRuMainControl Ack Messeage Time Out[%1] The connection to the RU was closed or an error Check the connection to the RU.
occurred in the connection.
13014 FFIdRUMainControlEx Ack Message Time The connection to the RU was closed or a connection Restore the RU connection to normal.
Out[%1] error occurred.
WSAGetLastError = [%2]
13014 FFIipInput [%1] No RU Used Although the FRUP option was selected, NetConfig Check the settings.
did not have any RU connection setting. There was a
conflict between the option setup and Config setup.
13014 FFIpcInf [%1] An illegal parameter was encountered (program “%1”: Instance name
It is a parameter error. defect).
13015 FFIdMenuChange It failed that [%1] get the bitmap to Id_NextPage_U.bmp/“Id_NextPage_ D.bmp”/“Id Reinstall the IIP because the button cannot be
Next Page _NextPage_X.bmp” was not found in the path to an displayed normally.
image folder or the image format was illegal.
13015 FFIdPatInfoInput It failed that [%1] gets the The “Multibyte” key was not found in the registry. Reinstall.
multibyte flag
13015 FFIpcInf [%1] An exception occurred (the system was unstable). Restart.
Exception Information.
%2
13016 FFIdPatInfoInput It failed that [%1] gets the date The “DateFormat” key was not found in the system Reinstall.
format type setup database.
13017 FFIdConnectionWatchEx RU Host Unknown Error[%1] The RU was not properly set for the IIP. Check the setup.
Error Code [%2]

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-15
Appendix A CL Error Message Table Appx MT A-16
Event Event Source Description Causes Remedies Remarks
13017 FFIdPatInfoInput It failed that [%1] gets the The “LangStrDB” key was not found in Directory.ini. Reinstall.
connection string of strDB
13017 FFIdRUMainControlEx RU Host Unknown Error[%1] The RU was not properly set for the IIP. Check the setup.
Error Code [%2]
13018 FFIdPatInfoInput It failed that [%1] connects to The connection character string was not properly Reinstall.
strDB registered for the “LangStrDB” key in Directory.ini.
13019 FFIdPatInfoInput It failed that [%1] gets the The “SysConfigDB” key was not found in Directory.ini. Reinstall.
connection string of sysDB
13020 FFIdPatInfoInput It failed that [%1] connects to The connection character string was not properly Reinstall.
sysDB registered for the “SysConfigDB” key in Directory.ini.
13020 FFIipInput RU Error DB Connect Error in [%1] The connection character string was not properly Reinstall.
registered for the “RuErrorDataDB” key in Directory.ini
or the RU error information database did not exist.
13021 FFIipInput RU Error Data Get Error in [%1] The window number sent from the RU was not found Ensure that the RU version agrees with the RU error
in the RU error information database. information database version.
13022 FFIdPatInfoInput It failed that [%1] gets System ID The system setup database was damaged. Reinstall.
13022 FFIipInput RU Status DB Connection String The connection character string was not properly Reinstall.
Get Error in [%1] registered for the “RuStatusDataDB” key in Directory.
ini.
13023 FFIdPatInfoInput %1 (%2) : Patient Information The patient information contained illegal information. Correct the patient information setup.
Check Error%n Item [%3]%n
Error [%4]
13023 FFIipInput RU Status DB Connect Error in The connection character string was not properly Reinstall.
[%1] registered for the “RuErrorDataDB” key in Directory.ini
or the RU error information database did not exist.
13024 FFIdPatInfoInput %1 (%2) : Bitmap Image Get “Id_LocalSearch_U.bmp”, “Id_LocalSearch_D.bmp”, Place “Id_LocalSearch_U.bmp”, “Id_LocalSearch_D.
Error%n or “Id_LocalSearch_X.bmp” was not found in the path bmp”, and “Id_LocalSearch_X.bmp” in the path to the
BMP File [%3] to the folder in which images were positioned. folder in which images are positioned.
13024 FFIipInput RU Status Data Get Error in [%1] The window number sent from the RU was not found Ensure that the RU version agrees with the RU error
in the RU error information database. information database version.
13025 FFIdPatInfoInput %1 (%2) : Patient Info Get The patient information database was damaged. Repair the patient information database.
Error%n
Error [%3]%n
RetCode [%4]
13026 FFIdPatInfoInput %1 (%2) : Patient Info Set Error%n The patient information to be registered contained Enter correct patient information or repair the patient
Error [%3]%n illegal information or the patient information database information database.
RetCode [%4] was damaged.
13027 FFIdPatInfoInput %1 (%2) : Patient Info Not No matching patient information was found.
Correspond%n
RetCode [%3]%n

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-16
Appendix A CL Error Message Table Appx MT A-17
Event Event Source Description Causes Remedies Remarks
13027 FFIipInput %1%n%2%n%3%n%4%n%5%n Control information No particular remedy needs be taken.
%6%n%7%0
13030 FFIipInput %1%n%2%n%3%n%4%n%5%n The connection character string was not properly Reinstall.
%6%n%7%0 registered for the “RuStatusDataDB” key in Directory.
ini.
13031 FFIipInput [%s] %s (%s): Log Output The system setup database was damaged. Reinstall.
Directory Get Error
13032 FFIipInput [%s] %s (%s): MCR Control The card reader unit was not connected. There are no particular problems except that the
Initialize Error magnetic card reader is not available.
13033 FFIipInput [%s] %s (%s): LR button cannot The range was changed by the Service Utility. No particular remedy needs be taken.
be concave set
13034 FFIipInput [%s] %s (%s): TB button cannot The range was changed by the Service Utility. No particular remedy needs be taken.
be concave set
13035 FFIipInput [%s] %s (%s): TBLR button cannot The range was changed by the Service Utility. No particular remedy needs be taken.
be concave set
13036 FFIipInput [%s] %s (%s): Rotation button The range was changed by the Service Utility. No particular remedy needs be taken.
cannot be concave set
13037 FFIipInput [%s] %s (%s): Message Table The “MsgTableName” key was not found in the Reinstall.
Name Get Error system setup database.
13038 FFIipInput [%s] %s (%s): StrDB Connection The “LangStrDB” key was not found in Directory.ini. Reinstall.
String Get
Error
13039 FFIipInput [%s] %s (%s): StrDB Connect The connection character string was not properly Reinstall.
Error registered for the “LangStrDB” key in Directory.ini.
13040 FFIipInput [%s] %s (%s): SysDB Connection The “SysConfigDB” key was not found in Directory.ini. Reinstall.
String Get
Error
13041 FFIipInput [%s] %s (%s): SysDB Connect The connection character string was not properly Reinstall.
Error registered for the “SysConfigDB” key in Directory.ini.
13042 FFIipInput [%s] %s (%s): ImageDB The “ImageDB“ key was not found in Directory.ini. Reinstall.
Connection Character String Get
Error
13043 FFIipInput [%s] %s (%s): Failed ImageDB The connection character string was not properly Reinstall.
Connection registered for the “ImageDB” key in Directory.ini.
13044 FFIipInput [%s] %s (%s): Failed ImageDB The image database was not successfully accessed. Reinstall.
Open Recordset
13045 FFIipInput [%s] %s (%s): Failed ImageDB The image database was not successfully accessed. Check whether the SQL service manager is normally
Close Recordset operating. If the same symptom occurs while the
SQL service manager is normally operating, initialize
the image database (the entire image data is then
deleted).

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-17
Appendix A CL Error Message Table Appx MT A-18
Event Event Source Description Causes Remedies Remarks
13046 FFIipInput [%s] %s (%s): ImageDB Data Get The image database was not successfully accessed. Check whether the SQL service manager is normally
Error operating. If the same symptom occurs while the
SQL service manager is normally operating, initialize
the image database (the entire image data is then
deleted).
13047 FFIipInput [%s] %s (%s): ImageDB Data Set The image database was not successfully accessed. Check whether the SQL service manager is normally
Error operating. If the same symptom occurs while the
SQL service manager is normally operating, initialize
the image database (the entire image data is then
deleted).
13048 FFIipInput [%s] %s (%s): ImageDB Data The image database was not successfully accessed. Check whether the SQL service manager is normally
Delete Error operating. If the same symptom occurs while the
SQL service manager is normally operating, initialize
the image database (the entire image data is then
deleted).
13049 FFIipInput [%s] %s (%s): Failed The image database was not successfully accessed. Check whether the SQL service manager is normally
ImageDBFlag Connection operating. If the same symptom occurs while the
SQL service manager is normally operating, initialize
the image database (the entire image data is then
deleted).
13050 FFIipInput [%s] %s (%s): Failed The image database was not successfully accessed. Check whether the SQL service manager is normally
ImageDBFlag Close operating. If the same symptom occurs while the
SQL service manager is normally operating, initialize
the image database (the entire image data is then
deleted).
13051 FFIipInput [%s] %s (%s): ImageDBFlag Data The image database was not successfully accessed. Check whether the SQL service manager is normally
Set Error operating. If the same symptom occurs while the
SQL service manager is normally operating, initialize
the image database (the entire image data is then
deleted).
13052 FFIipInput [%s] %s (%s): Failed MenuDB The initialization process for menu database access Reinstall.
Initialize was not successfully performed.
13053 FFIipInput [%s] %s (%s): Menu Data in Menu information was not successfully acquired from Reinstall.
ImageDB Get Error the menu database.
13054 FFIipInput [%s] %s (%s): Menu Parameter Menu parameter information was not successfully Reinstall.
Data in ImageDB Get Error acquired from the menu database.
13055 FFIipInput [%s] %s (%s): Failed MenuDB The termination process for menu database access Reinstall.
Termination was not successfully performed.
13056 FFIipInput [%s] %s (%s): NetDB Connection The “NetConfigDB” key was not found in Directory.ini. Reinstall.
Character String Get Error
13057 FFIipInput [%s] %s (%s): Failed NetDB The connection character string was not properly Reinstall.
Connection registered for the “NetConfigDB” key in Directory.ini.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-18
Appendix A CL Error Message Table Appx MT A-19
Event Event Source Description Causes Remedies Remarks
13058 FFIipInput [%s] %s (%s): NetDB Data Get The network setup database was damaged. Reinstall.
Error
13059 FFIipInput [%s] %s (%s): Failed Create New New DICOM data was not successfully created. Restart. If the problem frequently occurs, initialize the
DICOM Data image database.
13060 FFIipInput [%s] %s (%s): DICOM Data Get DICOM data was not successfully acquired. Restart. If the problem frequently occurs, initialize the
Error image database.
13061 FFIipInput [%s] %s (%s): DICOM Data Set DICOM data was not successfully set up. Restart. If the problem frequently occurs, initialize the
Error image database.
13062 FFIipInput [%s] %s (%s): DICOM Data Delete DICOM data was not successfully deleted. Restart. If the problem frequently occurs, initialize the
Error image database.
13063 FFIipInput [%s] %s (%s): DICOM Data Load DICOM data was not successfully loaded. Restart. If the problem frequently occurs, initialize the
Error image database.
13064 FFIipInput [%s] %s (%s): DICOM Data Save DICOM data was not successfully saved. Restart. If the problem frequently occurs, initialize the
Error image database.
13065 FFIipInput [%s] %s (%s): DICOM Data Free DICOM data was not successfully freed. Restart. If the problem frequently occurs, initialize the
Error image database.
13066 FFIipInput [%s] %s (%s): Failed in Padding The “IdPadding” key was not found in the system Reinstall.
Acquisition[Id#] setup database.
13067 FFIipInput [%s] %s (%s): Failed in Padding The “ExaminationNoPadding” key was not found in Reinstall.
Acquisition[Exam#] the system setup database.
13068 FFIipInput [%s] %s (%s): Failed in Format The “DateFormat” key was not found in the system Reinstall.
Acquisition[Date Of Birth] setup database.
13069 FFIipInput [%s] %s (%s): Cannot Access The requesting department database was not found in Reinstall.
Data Base[Departmdb] the path indicated by the connection character string.
The requesting department table did not exist.
13070 FFIipInput [%s] %s (%s): Displayed Item Is The “FieldDepartList” key was not found in the system Reinstall.
Not Understood[Depart List] setup database.
13072 FFIipInput [%s] %s (%s): Failed in Connected The “DepartDB” key was not found in Directory.ini. Reinstall.
String Acquisition[Depart]
13073 FFIipInput [%s] %s (%s): Cannot Access The technician’s database was not found in the path Reinstall.
Data Base[Paramedicmdb] indicated by the connection character string. The
technician’s table did not exist.
13074 FFIipInput [%s] %s (%s): Displayed Item Is The “FieldParamedicList” key was not found in the Reinstall.
Not Understood[Paramedic List] system setup database.
13076 FFIipInput [%s] %s (%s): Failed in Connected The “ParamedicDB” key was not found in Directory. Reinstall.
String Acquisition[Paramedic] ini.
13077 FFIipInput [%s] %s (%s): Failed in Window The registry was damaged. Reinstall.
Size Acquisition
13078 FFIipInput [%s] %s (%s): Failed in The “ExposureListErase” key was not found in the Reinstall.
ExposureList Erase system setup database.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-19
Appendix A CL Error Message Table Appx MT A-20
Event Event Source Description Causes Remedies Remarks
13079 FFIipInput [%s] %s (%s): Config Directory The “Config” key was not found in Directory.ini. Reinstall.
Character String Get Error
13080 FFIipInput [%s] %s (%s): ImageDBFlag Data The image database was damaged. Check whether the SQL service manager is normally
Get Error operating. If the same symptom occurs while the
SQL service manager is normally operating, initialize
the image database (the entire image data is then
deleted).
13081 FFIipInput [%s] %s (%s): StrDB Message The character string database was damaged. Reinstall.
String Get Error
13082 FFIipInput [%s] %s (%s): IP-Address(RU) The network setup database was damaged. Restart.
Get Error
13083 FFIipInput [%s] %s (%s): Initialize Timeout The system was unstable. Restart.
<InImg>
13084 FFIipInput [%s] %s (%s): Terminate Error The system was unstable. Restart.
<InImg>
13085 FFIipInput [%s] %s (%s): Terminate Timeout The system was unstable. Restart.
<InImg>
13086 FFIipInput [%s] %s (%s): Input The system was unstable. Restart.
Method Error <InImg>
13087 FFIipInput [%s] %s (%s): Original Image The system was unstable. Restart.
Input Failure <InImg>
13088 FFIipInput [%s] %s (%s): Image Processing The system was unstable. Restart.
Trouble <InImg>
13089 FFIipInput [%s] %s (%s): Menu Read Error The image database/information file was damaged. Reinstall.
<IdExposureList>
13090 FFIdDepartSelect %1 (%2) : Invalid Depart Code%n Directory.ini was damaged. Reinstall.
Code [%3]
13090 FFIdParamedicSelect %1 (%2) : Invalid Paramedic Directory.ini was damaged. Reinstall.
Code%n
Code [%3]
13090 FFIdIndividualSelect %1 (%2) : Invalid Directory.ini was damaged. Repair Directory.ini.
Depart/Paramedic Code%n
Code [%3]
13091 FFIdDepartSelect %1 (%2) : Invalid Depart Name The database was damaged. Reinstall.
(SBCS)%n
Name (SBCS) [%3]
13091 FFIdParamedicSelect %1 (%2) : Invalid Paramedic The database was damaged. Reinstall.
Name (SBCS)%n
Name (SBCS) [%3]

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-20
Appendix A CL Error Message Table Appx MT A-21
Event Event Source Description Causes Remedies Remarks
13091 FFIdIndividualSelect %1 (%2) : Invalid The database was damaged. Repair the database.
Depart/Paramedic
Name (SBCS)%n
Name (SBCS) [%3]
13094 FFIipInput [%s] %s (%s): Message Send The system was unstable. Restart.
Error <IpcInfCom>
13096 FFIipInput [%s] %s (%s): Request Command It is conceivable that there was a problem on the RU Check the RU status.
Not Executed <RU> side. (Although a command was requested, it was not
executed.)
13098 FF32LIB FF32lib A WIN32 system library An error occurred when calling up the WIN32 API. Restart.
error occurred. [%1]%n%2
13098 FFIipInput [%s] %s (%s): Reconnect Error The line was abnormal. Check the line.
<RU>
13098 FFIdPatInfoInput %1 (%2) : %n A general-use message for the input of patient If it is referring to an error, follow the custom message
[%3]%n information (serves as an error message and also as box that opens.
%4%n information).
%5
13098 FFNetDB FF32lib A WIN32 system library An error occurred when calling up the WIN32 API. Restart.
error occurred. [%1]%n%2
13099 FFIipInput [%s] %s (%s): Disconnect Error The line was abnormal. Check the line.
<RU>
13099 FF32LIB FF32lib An unknown error An exception error occurred. Restart.
occurred. [%1]%n%2
13099 FFNetDB FFNetDB An unknown error An exception error occurred. Restart.
occurred. [%1]%n%2
13100 FFIipInput [%s] %s (%s): Failed in Display The “DisplayDataDB” key was not found in Directory. Reinstall.
Group Acquisition[Initialize] ini or the connection character string was not properly
registered in the display group table.
13101 FFIipInput [%s] %s (%s): Failed in Display The “DisplayDataDB” key was not found in Directory. Reinstall.
Group Acquisition ini or the connection character string was not properly
registered in the display group table.
13101 IdMassOrder [%s] %s (%s): Failed in Display The “DisplayDataDB” key was not found in Directory. Reinstall.
frmMassOrder Group Acquisition ini or the connection character string was not properly
frmMassOrderConfig registered in the display group table.
13103 FFIipInput [%s] %s (%s): Failed in Display The “DisplayDataDB” key was not found in Directory. Reinstall.
Menu Acquisition[Initialize] ini.
13104 FFIipInput [%s] %s (%s): Failed in Display The menu database was damaged. Reinstall.
Menu Acquisition[Record]
13104 IdMassOrder [%s] %s (%s): Failed in Display The menu database was damaged. Reinstall.
frmMassOrder Menu Acquisition[Record]
frmMassOrderConfig

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-21
Appendix A CL Error Message Table Appx MT A-22
Event Event Source Description Causes Remedies Remarks
13108 FFIipInput [%s] %s (%s): Failed in Exposure The menu database was damaged. Reinstall.
Menu Acquisition
13109 FFIipInput [%s] %s (%s): Next Set Number The registry was damaged. Reinstall.
Data Get Error
13110 FFIipInput [%s] %s (%s): Next Set Number The registry was damaged. Reinstall.
Data Set Error
13111 FFIipInput [%s] %s (%s): System ID Data The system setup database was damaged. Reinstall.
Get Error
13112 FFIipInput [%s] %s (%s): Auto Distribution The system setup database was damaged. Reinstall.
Data Get Error
13113 FFIipInput [%s] %s (%s): Enable Selector The system setup database was damaged. Reinstall.
Data Get Error
13114 FFIipInput [%s] %s (%s): Auto Menu Select The system setup database was damaged. Reinstall.
Data Get Error
13115 FFIipInput [%s] %s (%s): Next Set Number The system setup database was damaged. Reinstall.
Min Data Get Error
13116 FFIipInput [%s] %s (%s): Next Set Number The system setup database was damaged. Reinstall.
Max Data Get Error
13120 FFIipInput [%s] %s (%s): Failed in Getting The database was not found or the associated key did Reinstall.
ID-Online Port# not exist.
13121 FFIipInput [%s] %s (%s): Failed in ID- Online The database was not found or the associated key did Reinstall.
Device Name not exist.
13122 FFIipInput [%s] %s (%s): RU Status DB Directory.ini was damaged. Reinstall.
Connection String Get Error
13123 FFIipInput [%s] %s (%s): Failed in selectable The “SelectableDirection” key was not found in the Reinstall.
direction system setup database or its value was incorrect.
13124 FFIipInput [%s] %s (%s): Failed in Selectable The “SelectableFormat” key was not found in the Reinstall.
Image Format Acquisition system setup database or its value was incorrect.
13125 FFIipInput [%s] %s (%s): FilmMarkDB The “FilmMarkDB“ key was not found in Directory.ini. Reinstall.
Connection String Get
Error
13126 FFIipInput [%s] %s (%s): FilmMarkDB The connection character string was not properly Reinstall.
Connect Error registered for the “FilmMarkDB“ key in Directory.ini.
13128 FFIipInput [%s] %s (%s): Failed in Limit Film The “LimitFilmCopy” key was not found in the system Reinstall.
Copy Acquisition setup database or its value was
incorrect.
13131 FFIipInput [%s] %s (%s): Failed in Selectable The “SelectableEdrMode” key was not found in the Reinstall.
EDR Mode Acquisition system setup database or its value was incorrect.
13132 FFIipInput [%s] %s (%s): Failed in Selectable The “SelectableFunction” key was not found in the Reinstall.
Function Acquisition system setup database or its value was incorrect.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-22
Appendix A CL Error Message Table Appx MT A-23
Event Event Source Description Causes Remedies Remarks
13134 FFIipInput [%s] %s (%s): Failed in Selectable The “SelectableFilingMode” key was not found in the Reinstall.
EDR Mode Acquisition system setup database or its value was incorrect.
13135 FFIipInput [%s] %s (%s): NetDB Data Get The connection character string for the network Reinstall.
Error setup database was not successfully acquired or the
network setup database did not exist.
13136 FFIipInput [%s] %s (%s): Failed in Enable The “EnableDistributionCode” key was not found in Reinstall.
DistributionCode Acquisition the system setup database or its value was incorrect.
13137 FFIipInput [%s] %s (%s): Failed in Enable The “EnableFileString” key was not found in the Reinstall.
FileString Acquisition system setup database or its value was incorrect.
13138 FFIipInput [%s] %s (%s): Failed in Enable The “EnableFunction” key was not found in the Reinstall.
Function Acquisition system setup database or its value was incorrect.
13157 FFIipInput [%s] %s (%s): Finish Mode Get The system setup database was damaged. Reinstall.
Error
13158 FFIipInput [%s] %s (%s): RU Error DB The “RuErrorDataDB” key was not found in Directory. Reinstall.
Connection String Get ini.
Error
13159 FFIipInput [%s] %s (%s): RU Error DB Table The “MsgTableName” key was not found in the Reinstall.
Name Get Error system setup database.
13160 FFIipInput [%s] %s (%s): Call Error [RU Error The specified ID was not registered in “RuErrorDataDB Reinstall.
CUSTOM MESSAGE BOX] “ or the custom message box was not successfully
called.
13161 FFIipInput [%s] %s (%s): Failed Display The program was faulty or the image file was Restart. If the problem frequently occurs, initialize the
Thumbnail Image damaged. image database.
13162 FFIipInput [%s] %s (%s): Ip Size Unit (Inch/ The system setup database was damaged. Reinstall.
Metric) Get Error
13165 FFIipInput [%s] %s (%s): Image Size Code RU-dependent symptom. Check the RU status.
Specify Error
13166 FFIipInput [%s] %s (%s): Pantomo Setting The system setup database was damaged. Repair the system setup database.
Get Error
13167 FFIipInput [%s] %s (%s): RU Error Info Get The RU error database was damaged. Reinstall the RU software.
Error
13168 FFIipInput [%s] %s (%s): RU Status Info Get The RU status information database was damaged. Reinstall the RU software.
Error
13177 FFIipInput [%s] %s (%s): Default Menu Code The system setup database was damaged. Reinstall.
Get Error
13178 FFIipInput [%s] %s (%s): Next Multi Frame The registry was damaged. Reinstall.
Pair Code Data Get Error
13179 FFIipInput [%s] %s (%s): Next Multi Frame The registry was damaged. Reinstall.
Pair Code Data Set Error

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-23
Appendix A CL Error Message Table Appx MT A-24
Event Event Source Description Causes Remedies Remarks
13180 FFIipInput [%s] %s (%s): Series Generation The system setup database was damaged. Reinstall.
Type Data Get Error
13181 FFIipInput [%s] %s (%s): Multi Frame UID The system setup database was damaged. Reinstall.
Information Get Error
13182 FFIipInput [%s] %s (%s): Failed in Getting The database did not exist or the associated key was Reinstall.
XCON Port# not found.
13183 FFIipInput [%s] %s (%s): Failed in XCON The database did not exist or the associated key was Reinstall.
Device Name not found.
13184 FFIipInput [%s] %s (%s): MCR Type Get The system setup database was damaged. Reinstall.
Error
13185 FFIipInput [%s] %s (%s): MCR Variation Get The system setup database was damaged. Reinstall.
Error
13186 FFIipInput [%s] %s (%s): Custom Card Use The system setup database was damaged. Reinstall.
Get Error
13187 FFIipInput [%s] %s (%s): Font Name Get The “Font” key was not found in the registry. Reinstall the IIP because the displayed characters
Error can be corrupted.
13188 FFIipInput [%s] %s (%s): Font Size Get Error The “FontSizeSS”/“FontSizeS”/“FontSizeM” Displayed characters can be corrupted. Reinstall the
/“FontSizeL”/“FontSizeLL” key was not found in the IIP as necessary.
registry.
13189 FFIipInput [%s] %s (%s): Multibyte Flag Get The “Multibyte” key was not found in the registry. Reinstall.
Error
13190 FFIipInput [%s] %s (%s): Failed in Caption The “LangStrDB” key was not found in Directory.ini Reinstall.
Acquisition[Id#] or the ID “30700” was not registered in the character
string database.
13191 FFIipInput [%s] %s (%s): Failed in Caption The “LangStrDB” key was not found in Directory.ini Reinstall.
Acquisition[Exam#] or the ID “30701” was not registered in the character
string database.
13192 FFIipInput [%s] %s (%s): Failed in Caption The “LangStrDB” key was not found in Directory.ini Reinstall.
Acquisition[SBCS Patient Name] or the ID “30702” was not registered in the character
string database.
13193 FFIipInput [%s] %s (%s): Failed in Caption The “LangStrDB” key was not found in Directory.ini Reinstall.
Acquisition[DBCS Patient Name] or the ID “30703” was not registered in the character
string database.
13194 FFIipInput [%s] %s (%s): Failed in Caption The “LangStrDB” key was not found in Directory.ini Reinstall.
Acquisition[Sex] or the ID “30704” was not registered in the character
string database.
13195 FFIipInput [%s] %s (%s): Failed in Caption The “LangStrDB” key was not found in Directory.ini Reinstall.
Acquisition[Sex M] or the ID “30705” was not registered in the character
string database.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-24
Appendix A CL Error Message Table Appx MT A-25
Event Event Source Description Causes Remedies Remarks
13196 FFIipInput [%s] %s (%s): Failed in Caption The “LangStrDB” key was not found in Directory.ini Reinstall.
Acquisition[Sex F] or the ID “30706” was not registered in the character
string database.
13197 FFIipInput [%s] %s (%s): Failed in Caption The “LangStrDB” key was not found in Directory.ini Reinstall.
Acquisition[Sex O] or the ID “30707” was not registered in the character
string database.
13198 FFIipInput [%s] %s (%s): Failed in Caption The “LangStrDB” key was not found in Directory.ini Reinstall.
Acquisition[Date Of Birth] or the ID “30708” was not registered in the character
string database.
13199 FFIipInput [%s] %s (%s): Failed in Limitation The “IdLength” key was not found in the system setup Reinstall.
No Acquisition[Id#] database.
13200 FFIipInput [%s] %s (%s): Failed in Limitation The “ExaminationNoLength” key was not found in the Reinstall.
No Acquisition[Exam#] system setup database.
13201 FFIipInput [%s] %s (%s): Failed in Caption The “LangStrDB” key was not found in Directory.ini Reinstall.
Acquisition[Depart] or the ID “30800” was not registered in the character
string database.
13202 FFIipInput [%s] %s (%s): Failed in Caption The “LangStrDB” key was not found in Directory.ini Reinstall.
Acquisition[Paramedic] or the ID “30800” was not registered in the character
string database.
13203 FFIipInput [%s] %s (%s): Image Folder Path The “Bitmap” key was not found in Directory.ini. Reinstall.
Get Error
13204 FFIipInput [%s] %s (%s): Id_Clear_U.bmp/“Id_Clear_D.bmp”/“Id_Clear_ X.bmp” Reinstall the IIP because the button cannot be
[Clear]Button Image Get Error was not found in the path to an image folder or the displayed normally.
image format was illegal.
13205 FFIipInput [%s] %s (%s): Id_Ok_U.bmp/“Id_Ok_D.bmp”/“Id_Ok_X.bmp” was Reinstall the IIP because the button cannot be
[Ok]Button Image Get Error not found in the path to an image folder or the image displayed normally.
format was illegal.
13206 FFIipInput [%s] %s (%s): [Cancel]Button Id_Cancel_U.bmp/“Id_Cancel_D.bmp”/“Id_Cancel_X. Reinstall the IIP because the button cannot be
Image Get Error bmp” was not found in the path to an image folder or displayed normally.
the image format was illegal.
13207 FFIipInput [%s] %s (%s): Id_Plus_U.bmp/“Id_Plus_D.bmp”/“Id_Plus_ X.bmp” Reinstall the IIP because the button cannot be
[Plus]Button Image Get Error was not found in the path to an image folder or the displayed normally.
image format was illegal.
13208 FFIipInput [%s] %s (%s): [Minus]Button Id_Minus_U.bmp/“Id_Minus_D.bmp”/“Id_Minus_ Reinstall the IIP because the button cannot be
Image Get Error X.bmp” was not found in the path to an image folder displayed normally.
or the image format was illegal.
13209 FFIipInput [%s] %s (%s): Id_NextPage_U.bmp/“Id_NextPage_ D.bmp”/“Id Reinstall the IIP because the button cannot be
[Next Page]Button Image Get _NextPage_X.bmp” was not found in the path to an displayed normally.
Error image folder or the image format was illegal.
13210 FFIipInput [%s] %s (%s): Id_PrevPage_U.bmp/“Id_PrevPage_ D.bmp”/“Id Reinstall the IIP because the button cannot be
[Previous Page]Button Image Get _PrevPage_X.bmp” was not found in the path to an displayed normally.
Error image folder or the image format was illegal.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-25
Appendix A CL Error Message Table Appx MT A-26
Event Event Source Description Causes Remedies Remarks
13211 FFIipInput [%s] %s (%s): RU Watch The line was abnormal. The program was faulty.
Connection Disconnected
13212 FFIipInput [%s] %s (%s): No ACK Returned The line was abnormal. The program was faulty.
in RU Watch Connection
13213 FFIipInput [%s] %s (%s): RU Control The line was abnormal. The program was faulty.
Connection Disconnected
13214 FFIipInput [%s] %s (%s): No ACK Returned The line was abnormal. The program was faulty.
in RU Control Connection
13217 FFIipInput [%s] %s (%s): Failed in Caption The “LangStrDB” key was not found in Directory.ini Reinstall.
Acquisition[Complete] or the ID “30202” was not registered in the character
string database.
13218 FFIipInput [%s] %s (%s): Failed in Caption The “LangStrDB” key was not found in Directory.ini Reinstall.
Acquisition[QA Unfinished] or the ID “30201” was not registered in the character
string database.
13219 FFIipInput [%s] %s (%s): Failed in Caption The “LangStrDB” key was not found in Directory.ini Reinstall.
Acquisition[Interrupt] or the ID “30200” was not registered in the character
string database.
13220 FFIipInput [%s] %s (%s): Failed in Caption The “LangStrDB” key was not found in Directory.ini Reinstall.
Acquisition[Cancel] or the ID “30203” was not registered in the character
string database.
13221 FFIipInput [%s] %s (%s): Failed in Caption The “LangStrDB” key was not found in Directory.ini Reinstall.
Acquisition[New Study] or the ID “30500” was not registered in the character
string database.
13222 FFIipInput [%s] %s (%s): Failed in Caption The “LangStrDB” key was not found in Directory.ini Reinstall.
Acquisition[Registered] or the ID “30501” was not registered in the character
string database.
13223 FFIipInput [%s] %s (%s): Failed in Caption The “LangStrDB” key was not found in Directory.ini Reinstall.
Acquisition[QA Waiting] or the ID “30502” was not registered in the character
string database.
13224 FFIipInput [%s] %s (%s): Failed in Caption The “LangStrDB” key was not found in Directory.ini Reinstall.
Acquisition[Output Waiting] or the ID “30503” was not registered in the character
string database.
13225 FFIipInput [%s] %s (%s): Failed in Caption The “LangStrDB” key was not found in Directory.ini Reinstall.
Acquisition[Outputted] or the ID “30504” was not registered in the character
string database.
13226 FFIipInput [%s] %s (%s): Failed in Caption The “LangStrDB” key was not found in Directory.ini Reinstall.
Acquisition[All] or the ID “30505” was not registered in the character
string database.
13227 FFIipInput [%s] %s (%s): Failed in Caption The “LangStrDB” key was not found in Directory.ini Reinstall.
Acquisition[Today] or the ID “30506” was not registered in the character
string database.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-26
Appendix A CL Error Message Table Appx MT A-27
Event Event Source Description Causes Remedies Remarks
13228 FFIipInput [%s] %s (%s): Failed in Image The “LangStrDB” key was not found in Directory.ini Reinstall.
Acquisition[System] or the ID “30507” was not registered in the character
string database.
13229 FFIipInput [%s] %s (%s): Failed in Caption The “LangStrDB” key was not found in Directory.ini Reinstall.
Acquisition[StudyReseve] or the ID “30600” was not registered in the character
string database.
13230 FFIipInput [%s] %s (%s): Failed in Caption The “LangStrDB” key was not found in Directory.ini Reinstall.
Acquisition[StudyStart] or the ID “30601” was not registered in the character
string database.
13231 FFIipInput [%s] %s (%s): Failed in Image The bmp file path/bmp file was abnormal. Reinstall.
Acquisition[Priority]
13232 FFIipInput [%s] %s (%s): Failed in Image The bmp file path/bmp file was abnormal. Reinstall.
Acquisition[End]
13233 FFIipInput [%s] %s (%s): Failed in Image The bmp file path/bmp file was abnormal. Reinstall.
Acquisition[Change]
13234 FFIipInput [%s] %s (%s): The bmp file path/bmp file was abnormal. Reinstall.
[New]Button Image Get Error
13235 FFIipInput [%s] %s (%s): [Repeat]Button The bmp file path/bmp file was abnormal. Reinstall.
Image Get Error
13236 FFIipInput [%s] %s (%s): The bmp file path/bmp file was abnormal. Reinstall.
[Again]Button Image Get Error
13237 FFIipInput [%s] %s (%s): The bmp file path/bmp file was abnormal. Reinstall.
[Add]Button Image Get Error
13238 FFIipInput [%s] %s (%s): [Delete]Button The bmp file path/bmp file was abnormal. Reinstall.
Image Get Error
13239 FFIipInput [%s] %s (%s): The bmp file path/bmp file was abnormal. Reinstall.
[Prev]Button Image Get Error
13240 FFIipInput [%s] %s (%s): The bmp file path/bmp file was abnormal. Reinstall.
[Next]Button Image Get Error
13241 FFIipInput [%s] %s (%s): The bmp file path/bmp file was abnormal. Reinstall.
[Monitor Mode]Button Image Get
Error
13242 FFIipInput [%s] %s (%s): The bmp file path/bmp file was abnormal. Reinstall.
[QA]Button Image Get Error
13243 FFIipInput [%s] %s (%s): [Change]Button The bmp file path/bmp file was abnormal. Reinstall.
Image Get Error
13244 FFIipInput [%s] %s (%s): The bmp file path/bmp file was abnormal. Reinstall.
[AP/PA]Button Image Get
Error

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-27
Appendix A CL Error Message Table Appx MT A-28
Event Event Source Description Causes Remedies Remarks
13245 FFIipInput [%s] %s (%s): The bmp file path/bmp file was abnormal. Reinstall.
[EDR Mode]Button Image Get
Error
13246 FFIipInput [%s] %s (%s): The bmp file path/bmp file was abnormal. Reinstall.
[Film Format]Button Image Get
Error
13247 FFIipInput [%s] %s (%s): The bmp file path/bmp file was abnormal. Reinstall.
[Detail]Button Image Get Error
13248 FFIipInput [%s] %s (%s): The character string database was damaged. Reinstall.
[New]Button ToolTipText Get Error
13249 FFIipInput [%s] %s (%s): [Repeat]Button The character string database was damaged. Reinstall.
ToolTipText Get Error
13250 FFIipInput [%s] %s (%s): The character string database was damaged. Reinstall.
[Again]Button ToolTipText Get
Error
13251 FFIipInput [%s] %s (%s): The character string database was damaged. Reinstall.
[Add]Button ToolTipText Get Error
13252 FFIipInput [%s] %s (%s): [Delete]Button The character string database was damaged. Reinstall.
ToolTipText Get Error
13253 FFIipInput [%s] %s (%s): The character string database was damaged. Reinstall.
[Prev]Button ToolTipText Get Error
13254 FFIipInput [%s] %s (%s): The character string database was damaged. Reinstall.
[Next]Button ToolTipText Get Error
13255 FFIipInput [%s] %s (%s): The character string database was damaged. Reinstall.
[Monitor Mode]Button ToolTipText
Get Error
13256 FFIipInput [%s] %s (%s): The character string database was damaged. Reinstall.
[QA]Button ToolTipText Get Error
13257 FFIipInput [%s] %s (%s): [Change]Button The character string database was damaged. Reinstall.
ToolTipText Get Error
13258 FFIipInput [%s] %s (%s): The character string database was damaged. Reinstall.
[AP/PA]Button ToolTipText Get
Error
13259 FFIipInput [%s] %s (%s): The character string database was damaged. Reinstall.
[EDR Mode]Button ToolTipText
Get Error
13260 FFIipInput [%s] %s (%s): The character string database was damaged. Reinstall.
[Film Format]Button ToolTipText
Get Error

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-28
Appendix A CL Error Message Table Appx MT A-29
Event Event Source Description Causes Remedies Remarks
13261 FFIipInput [%s] %s (%s): The character string database was damaged. Reinstall.
[Detail]Button ToolTipText Get
Error
13262 FFIipInput [%s] %s (%s): Failed in Image The bmp file path/bmp file was abnormal. Reinstall.
Acquisition[New]
13263 FFIipInput [%s] %s (%s): Failed in Image Id_NormalImage_U.bmp/“Id_NormalImage_ D.bmp” Reinstall the IIP because the button cannot be
Acquisition[Normal] /“Id_NormalImage_X.bmp” was not found in the path displayed normally.
to an image folder or the image format was illegal.
13264 FFIipInput [%s] %s (%s): Failed in Image Id_LR_Reverse_U.bmp/“Id_LR_Reverse_ D.bmp” Reinstall the IIP because the button cannot be
Acquisition[LR] /“Id_LR_Reverse_X.bmp” was not found in the path to displayed normally.
an image folder or the image format was illegal.
13265 FFIipInput [%s] %s (%s): Failed in Image Id_TB_Reverse_U.bmp/“Id_TB_Reverse_ D.bmp” Reinstall the IIP because the button cannot be
Acquisition[TB] /“Id_TB_Reverse_X.bmp” was not found in the path to displayed normally.
an image folder or the image format was illegal.
13266 FFIipInput [%s] %s (%s): Failed in Image Id_Rotation180_U.bmp/“Id_Rotation180_D.bmp” Reinstall the IIP because the button cannot be
Acquisition[TB LR] /“Id_Rotation180_X.bmp” was not found in the path to displayed normally.
an image folder or the image format was illegal.
13267 FFIipInput [%s] %s (%s): Failed in Image Id_Rotation90_U.bmp/“Id_Rotation90_D.bmp”/ Reinstall the IIP because the button cannot be
Acquisition[Rotation] “Id_Rotation90_X.bmp” was not found in the path to displayed normally.
an image folder or the image format was illegal.
13268 FFIipInput [%s] %s (%s): Failed in Image Id_Single_U.bmp/“Id_Single_D.bmp”/“Id_ Single_X. Reinstall the IIP because the button cannot be
Acquisition[Single] bmp” was not found in the path to an image folder or displayed normally.
the image format was illegal.
13269 FFIipInput [%s] %s (%s): Failed in Image Id_Twin_U.bmp/“Id_Twin_D.bmp”/“Id_Twin_ X.bmp” Reinstall the IIP because the button cannot be
Acquisition[Twin] was not found in the path to an image folder or the displayed normally.
image format was illegal.
13270 FFIipInput [%s] %s (%s): An Illegal Film Mark The film mark database was damaged. Reinstall.
Character Was Detected
13271 FFIipInput [%s] %s (%s): Failed in Caption The “LangStrDB” key was not found in Directory.ini Reinstall.
Acquisition[FIX] or the ID “33502” was not registered in the character
string database.
13272 FFIipInput [%s] %s (%s): Failed in Caption The “LangStrDB” key was not found in Directory.ini Reinstall.
Acquisition[Skfix] or the ID “33503” was not registered in the character
string database.
13273 FFIipInput [%s] %s (%s): Failed in Caption The “LangStrDB” key was not found in Directory.ini Reinstall.
Acquisition[SEMI- X] or the ID “33504” was not registered in the character
string database.
13274 FFIipInput [%s] %s (%s): Failed in Caption The “LangStrDB” key was not found in Directory.ini Reinstall.
Acquisition [DensityAverage] or the ID “33505” was not registered in the character
string database.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-29
Appendix A CL Error Message Table Appx MT A-30
Event Event Source Description Causes Remedies Remarks
13275 FFIipInput [%s] %s (%s): Id_Utility_U.bmp/“Id_Utility_D.bmp”/“Id_Utility_ Reinstall the IIP because the button cannot be
[Utility]Button Image Get Error X.bmp” was not found in the path to an image folder displayed nor
or the image format was illegal. mally.
13276 FFIipInput [%s] %s (%s): Failed in Caption The “LangStrDB” key was not found in Directory.ini Reinstall.
Acquisition[Alarm Stop] or the ID “32700” was not registered in the character
string database.
13277 FFIipInput [%s] %s (%s): Failed in Caption The character string database was damaged. Reinstall.
Acquisition[Exit]
13278 FFIipInput [%s] %s (%s): Failed in Caption The character string database was damaged. Reinstall.
Acquisition[User Utility]
13279 FFIipInput [%s] %s (%s): Failed in Caption The character string database was damaged. Reinstall.
Acquisition[List Setting]
13280 FFIipInput [%s] %s (%s): Failed in Caption The character string database was damaged. Reinstall.
Acquisition[Version]
13281 FFIipInput [%s] %s (%s): Failed in Caption The character string database was damaged. Reinstall.
Acquisition[CANCEL]
13282 FFIipInput [%s] %s (%s): The bmp file path/bmp file was abnormal. Reinstall.
[Clear]Button Image Get Error
13283 FFIipInput [%s] %s (%s): The character string database was damaged. Reinstall.
[Clear]Button ToolTipText Get
Error
13284 FFIipInput [%s] %s (%s): Failed in Caption The “LangStrDB” key was not found in Directory.ini Reinstall.
Acquisition[CANCEL] or the ID “35000” was not registered in the character
string database.
13285 FFIipInput [%s] %s (%s): Failed in Caption The “LangStrDB” key was not found in Directory.ini Reinstall.
Acquisition[DUST] or the ID “35001” was not registered in the character
string database.
13286 FFIipInput [%s] %s (%s): Tooltip Text Get The character string database was damaged. Reinstall.
Error
13287 FFIipInput [%s] %s (%s): Failed in Caption The character string database was damaged. Reinstall.
Acquisition[TitleBar]
13288 FFIipInput [%s] %s (%s): Failed in Caption The character string database was damaged. Reinstall.
Acquisition[Option]
13289 FFIipInput [%s] %s (%s): Version Info Get The registry was damaged. Reinstall.
Error
13290 FFIipInput [%s] %s (%s): Option List Get The registry was damaged. Reinstall.
Error
13291 FFIipInput [%s] %s (%s): Id_RuProcess_I.bmp was not found in the path to an Reinstall the IIP because the button cannot be
[Cassette Acceptable] Image Get image folder or the image format was illegal. displayed normally.
Error

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-30
Appendix A CL Error Message Table Appx MT A-31
Event Event Source Description Causes Remedies Remarks
13292 FFIipInput [%s] %s (%s): Id_RuProcessN_I.bmp was not found in the path to Reinstall the IIP because the button cannot be
[Cassette Unacceptable] Image an image folder or the image format was illegal. displayed normally.
Get Error
13293 FFIipInput [%s] %s (%s): The bmp file path/bmp file was abnormal. Reinstall.
[Miss]Image Get Error
13294 FFIipInput [%s] %s (%s): Id_ApPa_U.bmp/“Id_ApPa_D.bmp”/ Reinstall the IIP because the button cannot be
[Image Style]Button Image Get “Id_ ApPa_ X.bmp” was not found in the path to an displayed normally.
Error image folder or the image format was illegal.
13295 FFIipInput [%s] %s (%s): Id_Edr_U.bmp/“Id_Edr_D.bmp”/ Reinstall the IIP because the button cannot be
[EDR]Button Image Get Error “Id_Edr_ X.bmp” was not found in the path to an displayed normally.
image folder or the image format was illegal.
13296 FFIipInput [%s] %s (%s): [Function]Button Id_Edr_U.bmp/“Id_Edr_D.bmp”/“Id_Edr_X.bmp” was Reinstall the IIP because the button cannot be
Image Get Error not found in the path to an image folder or the image displayed normally.
format was illegal.
13297 FFIipInput [%s] %s (%s): Id_FilmCount_U.bmp/“Id_FilmCount_ D.bmp” Reinstall the IIP because the button cannot be
[Film Count]Button Image Get /“Id_FilmCount_X.bmp” was not found in the path to displayed normally.
Error an image folder or the image format was illegal.
13298 FFIipInput [%s] %s (%s): Id_IpSize_U.bmp/“Id_IpSize_D.bmp”/ Reinstall the IIP because the button cannot be
[Ip Size]Button Image Get Error “Id_ IpSize_X.bmp” was not found in the path to an displayed normally.
image folder or the image format was illegal.
13299 FFIipInput [%s] %s (%s): Id_FilmFormat_U.bmp/“Id_FilmFormat_ D.bmp” Reinstall the IIP because the button cannot be
[Image Format]Button Image Get /“Id_FilmFormat_X.bmp” was not found in the path to displayed normally.
Error an image folder or the image format was illegal.
13300 FFIipInput [%s] %s (%s): Id_FilingMode_U.bmp/“Id_FilingMode_ D.bmp” Reinstall the IIP because the button cannot be
[Filing]Button Image Get Error /“Id_FilingMode_X.bmp” was not found in the path to displayed normally.
an image folder or the image format was illegal.
13301 FFIipInput [%s] %s (%s): Id_FilmMark_U.bmp/“Id_FilmMark_D.bmp”/“Id_ Reinstall the IIP because the button cannot be
[Film Mark]Button Image Get Error FilmMark_X.bmp” was not found in the path to an displayed normally.
image folder or the image format was illegal.
13302 FFIipInput [%s] %s (%s): Id_DistributionCode_U.bmp/“Id_DistributionCode_D. Reinstall the IIP because the button cannot be
[Distribution Code]Button Image bmp”/“Id_DistributionCode_ X.bmp” was not found in displayed normally.
Get Error the path to an image folder or the image format was
illegal.
13303 FFIipInput [%s] %s (%s): [CSSS]Button Id_CsCs_U.bmp/“Id_CsCs_D.bmp”/“Id_CsCs_ Reinstall the IIP because the button cannot be
Image Get Error X.bmp” was not found in the path to an image folder displayed normally.
or the image format was illegal.
13304 FFIipInput [%s] %s (%s): Image Data The line was abnormal. Check the line.
Connection Disconnected
13309 FFIipInput [%s] %s (%s): Failed in Patient The patient information contained an illegal character Ensure that the patient information does not contain
Information string. any illegal character string.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-31
Appendix A CL Error Message Table Appx MT A-32
Event Event Source Description Causes Remedies Remarks
13345 FFIdDepartSelect %1 (%2) : Database Data Get The database was damaged. Reinstall.
Error%n
Database [%3]%n
Table [%4]%n
Key [%5]
13345 FFIdFilmMark %1 (%2) : Database Data Get The database was damaged. Reinstall.
Error%n
Database [%3]%n
Table [%4]%n
Key [%5]
13345 FFIdMcrControl IdMcrControl (threadMcrRead) : The database was faulty. Reinstall.
Database Data Get Error
13345 FFIdParamedicSelect %1 (%2) : Database Data Get The database was damaged. Reinstall.
Error%n
Database [%3]%n
Table [%4]%n
Key [%5]
13345 FFIdPatInfoInput %1 (%2) : Database Data Get The database was damaged. Reinstall.
Error%n
Database [%3]%n
Table [%4]%n
Key [%5]
13345 FFIipInput %1 (%2) : Database Data Get The database was damaged. Reinstall.
Error%n
Database [%3]%n
Table [%4]%n
Key [%5]
13345 FFIdIndividualSelect %1 (%2) : Database Data Get The database was damaged. Repair the database.
Error%n
Database [%3]%n
Table [%4]%n
Key [%5]
13345 IdMassOrder %1 (%2) : Database Data Get The database was damaged. Reinstall.
frmMassOrder Error%n
frmMassOrderConfig Database [%3]%n
Table [%4]%n
Key [%5]
13346 FFIipInput %1 (%2) : Patient Information The patient information contained illegal information. Correct the patient information setup.
Check Error%n Item [%3]%n
Error [%4]
13346 IdMassOrder %1 (%2) : Patient Information The patient information contained illegal information. Correct the patient information setup.
frmMassOrder Check Error%n Item [%3]%n
frmMassOrderConfig Error [%4]

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-32
Appendix A CL Error Message Table Appx MT A-33
Event Event Source Description Causes Remedies Remarks
13347 FFIipInput %1 (%2) : Caption Get Error%n The character string database was damaged. Reinstall.
CaptionId [%3]
13347 IdMassOrder %1 (%2) : Caption Get Error%n The character string database was damaged. Reinstall.
frmMassOrder CaptionId [%3]
frmMassOrderConfig
13348 FFIdDepartSelect %1 (%2) : Registry Data Get The registry was damaged. Reinstall.
Error%n
Value [%3]
13348 FFIdFilmMark %1 (%2) : Registry Data Get The registry was damaged. Reinstall.
Error%n
Value [%3]
13348 FFIdMenuChange %1 (%2) : Registry Data Get The registry was damaged. Reinstall.
Error%n
Value [%3]
13348 FFIdParamedicSelect %1 (%2) : Registry Data Get The registry was damaged. Reinstall.
Error%n
Value [%3]
13348 FFIdPatInfoInput %1 (%2) : Registry Data Get The registry was damaged. Reinstall.
Error%n
Value [%3]
13348 FFIipInput %1 (%2) : Registry Data Get The registry was damaged. Reinstall.
Error%n
Value [%3]
13348 FFIdIndividualSelect %1 (%2) : Registry Data Get The registry was damaged. Repair the registry.
Error%n
13348 IdMassOrder %1 (%2) : Registry Data Get The registry was damaged. Reinstall.
frmMassOrder Error%n
frmMassOrderConfig Value [%3]
13349 FFIdDepartSelect %1 (%2) : INI File Data Get Directory.ini was damaged. Reinstall.
Error%n
Key [%3]
13349 FFIdFilmMark %1 (%2) : INI File Data Get Directory.ini was damaged. Reinstall.
Error%n
Key [%3]
13349 FFIdMenuChange %1 (%2) : INI File Data Get Directory.ini was damaged. Reinstall.
Error%n
Key [%3]
13349 FFIdParamedicSelect %1 (%2) : INI File Data Get Directory.ini was damaged. Reinstall.
Error%n
Key [%3]

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-33
Appendix A CL Error Message Table Appx MT A-34
Event Event Source Description Causes Remedies Remarks
13349 FFIdPatInfoInput %1 (%2) : INI File Data Get Directory.ini was damaged. Reinstall.
Error%n
Key [%3]
13349 FFIipInput %1 (%2) : INI File Data Get Directory.ini was damaged. Reinstall.
Error%n
Key [%3]
13349 FFIdIndividualSelect %1 (%2) : INI File Data Get Registry.ini was damaged. Repair Registry.ini.
Error%n
Key [%3]
13349 IdMassOrder %1 (%2) : INI File Data Get Directory.ini was damaged. Reinstall.
frmMassOrder Error%n
frmMassOrderConfig Key [%3]
13350 FFIdFilmMark %1 (%2) : Bitmap Image Get The bmp file path or bmp file was abnormal. Reinstall.
Error%n
BMP File [%3]
13350 FFIdMenuChange %1 (%2) : Bitmap Image Get The bmp file path or bmp file was abnormal. Reinstall.
Error%n
BMP File [%3]
13350 FFIipInput %1 (%2) : Bitmap Image Get The bmp file path or bmp file was abnormal. Reinstall.
Error%n
BMP File [%3]
13350 IdMassOrder %1 (%2) : Bitmap Image Get The bmp file path or bmp file was abnormal. Reinstall.
frmMassOrder Error%n
frmMassOrderConfig BMP File [%3]
13352 FFIipInput %1 (%2) : Dicom MWM & PPS The DICOM MWM & PPS option was not installed. Install the DICOM MWM & PPS option.
Option Not Install
13353 FFIipInput %1 (%2) : Dicom MWM Option The DICOM MWM option was not installed. Install the DICOM MWM option.
Not Install
13362 FFIipInput %1 (%2) : Not Entry Host Name The host name for the local enclosure was not With the service utility, register the host information
successfully acquired. about the PPS local enclosure.
13370 FFIipInput %1 (%2) : PPS Request Failure [IN The equipment connection was faulty or the remote Retry.
PROGRESS] equipment power was OFF.
13371 FFIipInput %1 (%2) : PPS Request Failure The equipment connection was faulty or the remote Retry.
[COMPLETED] equipment power was OFF.
13372 FFIipInput %1 (%2) : PPS Request Failure The equipment connection was faulty or the remote Retry.
[DISCONTINUED] equipment power was OFF.
13382 FFIipInput %1 (%2) : Study List Refresh Retry.
Exception%nError [%3]
13386 FFIipInput %1 (%2) : Failed in data The serial cable was broken or the connected Reinstall.
reception%n[Online Time Out] equipment did not respond.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-34
Appendix A CL Error Message Table Appx MT A-35
Event Event Source Description Causes Remedies Remarks
13389 FFIdDepartSelect %1 (%2) : Database Connection The database was damaged. Reinstall.
Error%n Database [%3]%n
13389 FFIdFilmMark %1 (%2) : Database Connection The database was damaged. Reinstall.
Error%n Database [%3]%n
13389 FFIdParamedicSelect %1 (%2) : Database Connection The database was damaged. Reinstall.
Error%n Database [%3]%n
13389 FFIdPatInfoInput %1 (%2) : Database Connection The database was damaged. Reinstall.
Error%n Database [%3]%n
13389 FFIipInput %1 (%2) : Database Connection The database was damaged. Reinstall.
Error%n Database [%3]%
13389 FFIdIndividualSelect %1 (%2) : Database Connection The database was damaged. Repair the database.
Error%n Database [%3]%n
13392 FFIipInput %1 (%2) : BCR Control Initialize The barcode reader was not connected. Connect the barcode reader.
Error
13420 FFIipInput %1 (%2) : Failed in Menu A problem occurred in the 550X unit when a cleared Check the 550X unit.
Clear.%nInternal Error in Builtin menu was reported.
[%3]
13421 FFIipInput %1 (%2) : Menu Clear Command A timeout occurred because the 550X unit did not Check the 550X unit (power supply, cable, etc.).
Time out [%3] respond to a report about a cleared menu.
13423 FFIipInput %1 (%2) : Failed in Ip A problem occurred in the 550X unit during the IP Check the 550X unit.
Shelter.%nFatal Error [%3] evacuation sequence.
13424 FFIipInput %1 (%2) : Failed in Ip A problem occurred in the 550X unit during the IP Check the 550X unit. Solve the problem with a UTL or
Shelter.%nIntervention Error in evacuation sequence. the like.
Builtin [%3]
13425 FFIipInput %1 (%2) : Failed in Ip A problem occurred in the 550X unit during the IP Check the 550X unit.
Shelter.%nInternal Error in Builtin evacuation sequence.
[%3]
13426 FFIipInput %1 (%2) : Ip Shelter Command A timeout occurred because the 550X unit did not Check the 550X unit (power supply, cable, etc.).
Time out [%3] respond to an IP evacuation request.
13428 FFIipInput %1 (%2) : Failed in Menu A line abnormality was encountered. Check the line.
Fixed.%nConnection Error to
Builtin [%3]
13429 FFIipInput %1 (%2) : Failed in Menu A problem occurred in the 550X unit when a finalized Check the 550X unit.
Fixed.%nInternal Error in Builtin menu was reported.
[%3]
13430 FFIipInput %1 (%2) : Menu Fixed Command A timeout occurred because the 550X unit did not Check the 550X unit (power supply, cable, etc.).
Time out [%3] respond to a report about a finalized menu.
13432 FFIipInput %1 (%2) : Failed in Ip A line abnormality was encountered. Check the line.
Size%nConnection Error to Builtin
[%3]

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-35
Appendix A CL Error Message Table Appx MT A-36
Event Event Source Description Causes Remedies Remarks
13435 FFIipInput %1 (%2) : Failed in Ip A problem occurred in the 550X unit when a size Check the 550X unit.
Size.%nInternal Error in Builtin notification request was issued.
[%3]
13436 FFIipInput %1 (%2) : Ip Size Command Time A timeout occurred because the 550X unit did not Check the 550X unit (power supply, cable, etc.).
out [%3] respond to a size notification request.
13438 FFIipInput %1 (%2) : Failed in Ip Set.%nFatal A problem occurred in the 550X unit during the IP Check the 550X unit.
Error [%3] setup sequence.
13439 FFIipInput %1 (%2) : Failed in Ip A problem occurred in the 550X unit during the IP Check the 550X unit. Solve the problem with a UTL or
Set.%nIntervention Error in Builtin setup sequence. the like.
[%3]
13440 FFIipInput %1 (%2) : Failed in Ip A problem occurred in the 550X unit during the IP Check the 550X unit.
Set.%nInternal Error in Builtin [%3] setup sequence.
13441 FFIipInput %1 (%2) : Ip Set Command Time A timeout occurred because the 550X unit did not Check the 550X unit (power supply, cable, etc.).
out [%3] respond to an IP setup request.
13442 FFIipInput %1 (%2) : Ip Delete Command A timeout occurred because the 550X unit did not Check the 550X unit (power supply, cable, etc.).
Time out [%3] issue an IP deletion request.
13443 FFIipInput %1 (%2) : Cannot Change Patient An attempt was made to change the patient Change the information after completion of image
Info information during an image input sequence (patient input.
EditMode [%3] information change button: inactive).
13444 FFIipInput %1 (%2) : Cannot End An attempt was made to terminate a study during an Terminate the study after completion of image input.
Examination ExamEndMode [%3] image input sequence (study end button: inactive).
13447 FFIipInput %1 : IipInput.exe [Starts] IipInput.exe is started (information).
13448 FFIipInput %1 : IipInput.exe [Normal IipInput.exe is terminated (information).
Termination]
13449 FFIipInput %1 : IipInput.exe [Forced IipInput.exe is terminated (information).
Termination]
13451 FFIipInput %1 (%2) : Failed in Line error. Check the 550X unit (power supply, cable, etc.).
Get Ip Information
Response.%nConnection Error to
Builtin [%3]
13452 FFIipInput %1 (%2) : Get Ip Information A timeout occurred when an attempt was made to Check the 550X unit (power supply, cable, etc.).
Response Time out [%3] respond to an ID information request from the 550X
unit.
13457 FFIipInput %1 (%2) : Image Processing This error occurs if the image processing parameter
Information <InImg> file does not exist.
13458 FFIipInput %1 (%2) : Failed in Connection Setup error. Change IIP's SysConfig setup or RU's connection
Between Reader and style.
Console.%nIIP[%3]%nRU
[-%4]
13459 FFIipInput %1 (%2) : Wait Timeout for X-Cont The XCON shot result reception timeout value for Review the XCON shot result reception timeout value
Shot Result built-in type exposures was found improper. for built-in type exposures.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-36
Appendix A CL Error Message Table Appx MT A-37
Event Event Source Description Causes Remedies Remarks
13462 FFIipInput %1 (%2) : Ordering Exposure The exposure menu received as the ordering Register the exposure menu with the user utility.
Menu Not Entry [%3] information was not registered.
13470 FFIipInput %1 (%2) : Exposure Menu The exposure menu received as the ordering Register the exposure menu with the user utility.
Register Error. information was not registered.
13471 FFIipInput %1 (%2) : All Exposure Menu The exposure menu received as the ordering Register the exposure menu with the user utility.
Register Error. information was not registered.
13472 FFIipInput %1 (%2) : Selected Menu is Done. The exposure process for the selected exposure Select a menu for which an exposure process has not
XCON Result Information is menu was already performed. The result data been performed.
annulled. [%3] received from the XCON will be discarded.
13473 FFIipInput %1 (%2) : Menu is not Selected. No exposure menu was selected. The result data Select a menu for which an exposure process has not
XCON Result Information is received from the XCON will be discarded. been performed.
annulled. [%3]
13474 FFIipInput %1 (%2) : Exceeded the Limitation The XCON parameter was improperly set. Reregister the XCON parameter with the user utility.
Value of XCON Exposure Data.
[%3 = %4]
13475 FFIipInput %1 (%2) : Failed in Ordering The patient exposure order information sent from the
Data.[RIS] RIS was abnormal.
13477 FFIipInput %1 (%2) : Exposure Menu The exposure menu specified by the received Register the exposure menu with the user utility.
Register Error. ordering information was not registered.
13478 FFIipInput %1 (%2) : All Exposure Menu The exposure menu specified by the received Register the exposure menu with the user utility.
Register Error. ordering information was not registered.
13479 FFIipInput %1 (%2) : Failed in Examination The order exposure study termination signal was Check the RIS settings.
End Command.[Ris] received from the RIS although an order exposure
was not received.
13480 FFIipInput %1 (%2) : Failed in The problem is attributable to a disconnected line or Check the equipment and cables.
Communication with RIS. invalid parameter.
[%3]%n[%4]
13483 FFIipInput %1 (%2) : Menu is not Selected. An ID acquisition request was received from built- Make a menu selection and then press the OK button
Failed in Getting ID Information in type equipment although no exposure menu was on the built-in type Console.
selected.
13484 FFIipInput %1 (%2) : Failed in the System Inappropriate installation. Reinstall the system to secure matching between DX
Start. option and menu database.
[Error: OpDcmStandardDx or
MenuData.mdb]
13489 FFIipInput %1 (%2) : Patient Info Set Error%n Patient information to be registered included illegal Enter correct patient information or repair patient
Error [%3]%n information items or patient information database was information database.
RetCode [%4] damaged.
13490 FFIipInput %1 (%2) : UserName Check Illegal information was input as the username. Call upon the user to input a correct username.
Error%n
Item [%3]%n
Error [%4]

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-37
Appendix A CL Error Message Table Appx MT A-38
Event Event Source Description Causes Remedies Remarks
13491 FFIipInput User Login [UserName:%1] The user logged in the system.
13492 FFIipInput User Logout [UserName:%1 The user logged off the system.
13493 FFIipInput %1 (%2) : MCR-Data Send Failed in transferring magnetic card information to the Repeat the same operation. If the symptom remains
Error.[RIS] FRIS. uncorrected, check the barcode information.
13494 FFIipInput %1 (%2) : BCR-Data Send Failed in transferring barcode information to the FRIS. Repeat the same operation. If the symptom remains
Error.[RIS] uncorrected, check the barcode information.
13495 FFIipInput [%1] Failed in setting MCR data Failed in setting magnetic card information. Repeat the same operation. If the symptom remains
[%2] uncorrected, check the magnetic card information.
13496 FFIipInput [%1] Failed in setting BCR data Failed in setting barcode information. Repeat the same operation. If the symptom remains
[%2] uncorrected, check the barcode information.
13497 FFIipInput %1 (%2) : Failed in deleting Program error.
multibyte data
13901 IIPInputEz %1 : Registry Value The acquisition/setup key or registration information Check the registry key.
Get/Set Error%n was abnormal.
[Key] %2%n
[Exp] %3%n
%4%n
%5
13902 IIPInputEz %1 : Database Connection This error is attributable to an abnormal character Check Directory.ini or database file name.
Error%n string in Directory.ini, an incorrect database file name,
[DB] %2%n or a damaged database.
[Exp] %3%n
%4%n
%5
13903 IIPInputEz %1 : Database Data The acquisition/setup key or database was abnormal. Check the database table/field name.
Get/Set Error%n
[DB] %2%n
[Table] %3%n
[Field] %4%n
[Exp] %5
13903 IIPInputEz %1 : Dicom Data Object Get/Set The DDO acquisition/setup tag was abnormal. Check the DDO tag.
Error%n
[Tag] %2%n
[Exp] %3%n
%4%n
%5
13904 IIPInputEz %1 : Other Error%n [Procedure] Unknown error.
%2%n [ErrorCode] %3%n
[Exp] %4%n
%5
13998 FFIipInput %1 (%2) : [%3] General information event log.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-38
Appendix A CL Error Message Table Appx MT A-39
Event Event Source Description Causes Remedies Remarks
13998 FFIipInput SendToCommPort, COMM Port The data transmission port is defective. Check connection and settings of the port.
Send Error
13998 FFIipInput m_hQUEMutex, Create Mutex An exclusive processing error occurred. Restart.
Error
13998 FFIipInput CommOpen, COMM Port Open A failure resulted in an attempt to establish connection Check connection and settings of the port.
Error to the data transmission port.
13998 FFIipInput CommOpen, COMM Port Param Settings of the data transmission port are defective. Check settings for connection to the port.
Set Error
13998 FFIipInput tControlMain, _beginthreadex A failure occurred in an attempt to start the main Restart.
Create Error thread.
13998 FFIipInput End_ControlProc, COMM Port A failure occurred in an attempt to close the port. No particular remedial measures need to be taken as
Close Error the CR Console is in process of shutdown.
13998 FFIipInput MakeSendMessage, Message The received data is defective. Check the connected cable and device.
Code Convert Error
13998 FFIipInput lFocus, DicomDataFormatError The “Focus” data received is defective. Check the equipment targeted for connection or
restart it.
13998 FFIipInput lTubeVoltage, The “Tube Voltage” data received is defective. Check the equipment targeted for connection or
DicomDataFormatError restart it.
13998 FFIipInput lExposureTime, The “Exposure Time” data received is defective. Check the equipment targeted for connection or
DicomDataFormatError restart it.
13998 FFIipInput lmAs, DicomDataFormatError The “mAs” data received is defective. Check the equipment targeted for connection or
restart it.
13998 FFIipInput csGrid, DicomDataFormatError The “Grid” data received is defective. Check the equipment targeted for connection or
restart it.
13998 FFIipInput lGlandulardose, The “Glandular Dose” data received is defective. Check the equipment targeted for connection or
DicomDataFormatError restart it.
13998 FFIipInput csFilterMaterial, The “Filter Material” data received is defective. Check the equipment targeted for connection or
DicomDataFormatError restart it.
13998 FFIipInput BodyPartThickness, The “Body Part Thickness” data received is defective. Check the equipment targeted for connection or
DicomDataFormatError restart it.
13998 FFIipInput csActualStereoAngle, The “Actual Stereo Angle” data received is defective. Check the equipment targeted for connection or
DicomDataFormatError restart it.
13998 FFIipInput csTubeHeadAngle, The “Tube Head Angle” data received is defective. Check the equipment targeted for connection or
DicomDataFormatError restart it.
13998 FFIipInput lmAsActualValue, The “Actual Value” data received is defective. Check the equipment targeted for connection or
DicomDataFormatError restart it.
13998 FFIipInput SetAllMammoXcon, An attempt to generate a DICOM file resulted in a Restart the CR Console.
DicomDataCreateError failure.
13998 FFIipInput SaveResExpParamData, An attempt to store a DICOM file resulted in a failure. Restart.
DicomFile Save Error

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-39
Appendix A CL Error Message Table Appx MT A-40
Event Event Source Description Causes Remedies Remarks
13998 FFIipInput SaveResExpParamData, Not Use An attempt to obtain information on the folder targeted Restart.
Dicom Directory for storing a DICOM file resulted in a failure.
13998 FFIipInput tComRecvMain, Sub Tread Create A attempt to create a data reception thread resulted in Restart.
Error a failure.
13998 FFIipInput MainTH_MainPrc, Received from An attempt to obtain an area resulted in a failure. Restart.
Port [Alloc Error]
13998 FFIipInput MainTH_MainPrc, Received Buffer The received data is defective. Check the equipment targeted for connection or
Claer restart it.
13998 FFIipInput RespOperation, QUE Break by The received data is defective. Check the equipment targeted for connection or
Interrupt Data from XCON restart it.
13998 FFIipInput RespOperation, response data The received data is defective. Check the equipment targeted for connection or
Format error restart it.
13998 FFIipInput RespOperation, response data A checksum error was found in the received data. Check the equipment targeted for connection or
Checksum error restart it.
13998 FFIipInput RespOperation, Alloc Error for An attempt to obtain an area resulted in a failure. Restart.
Dicom Data
13998 FFIipInput RespOperation, Alloc Error for An attempt to obtain an area resulted in a failure. Restart.
XConError
13998 FFIipInput RespOperation, XConError data The received data is defective. Restart.
Iregular Format
13998 FFIipInput ACKOperation, No Target [ACK] Illegal ACK data was received. Nothing particular.
Receive
13998 FFIipInput SendToCommPort, Send Error Data transmission resulted in a failure. Check the equipment targeted for connection or
restart it.
13998 FFIipInput RetryOperation, Retry Send Error Data retransmission processing resulted in a failure. Check the equipment targeted for connection or
restart it.
13998 FFIipInput RetryOperation, Comm Send An attempt to retransmit data resulted in a failure. Check the equipment targeted for connection or
Retry Over restart it.
13998 FFIipInput RetryOperation, Response A timeout error occurred while in wait of data Check the equipment targeted for connection or
Timeout reception. restart it.
13998 FFIipInput RespOperation, Compression The compression force data was abnormal. Nothing particular.
Force data Format error
13998 FFIipInput RespOperation, Compression A compression force data checksum error occurred. Nothing particular.
Force data Checksum error
13998 FFIipInput RespOperation, Delete Dicom File Deletion of a stored DicomFile resulted in a failure. Restart.
Error
13998 FFIipInput RetryOperation, Delete Dicom File Deletion of a stored DicomFile resulted in a failure. Restart.
Error
13998 FFIipInput RespOperation, Send AskParam AskParam command transmission failed. Check the equipment targeted for connection or
Error restart it.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-40
Appendix A CL Error Message Table Appx MT A-41
Event Event Source Description Causes Remedies Remarks
13998 FFIipInput FFGetPASSecurityFuncIDList The PAS security function ID list is empty. Restart.
Error nCount=%1
13998 FFIipInput ConfigData Is Illegal [DAPDataBit] Illegal IdVacDap configuration settings and Set the DAPDataBit value to 0:7bit or 1:8bit.
DAPDataBit value.
13998 FFIipInput DAPDataBit Nothing Illegal IdVacDap configuration settings and Set the DAPDataBit value to 0:7bit or 1:8bit.
undetermined DAPDataBit value.
13998 FFIipInput ConfigData Is Illegal [DAPStopBit] Illegal IdVacDap configuration settings and Set the DAPStopBit value to 0:1bit or 1:1.5bit or 2:2bit.
DAPStopBit value.
13998 FFIipInput DAPStopBit Nothing Illegal IdVacDap configuration settings and Set the DAPStopBit value to 0:1bit or 1:1.5bit or 2:2bit.
undetermined DAPStopBit value.
13998 FFIipInput ConfigData Is Illegal [DAPParity] Illegal IdVacDap configuration settings and DAPParity Set the DAPParity value to 0:none or 1:odd or 2:even.
value.
13998 FFIipInput DAPParity Nothing Illegal IdVacDap configuration settings and Set the DAPParity value to 0:none or 1:odd or 2:even.
undetermined DAPParity value.
13998 FFIipInput ConfigData Is Illegal Illegal IdVacDap configuration settings and Set the DAPBaudrate value to 0:1200 or 1:2400 or
[DAPBaudrate] DAPBaudrate value. 2:4800.
13998 FFIipInput DAPBaudrate Nothing Illegal IdVacDap configuration settings and Set the DAPBaudrate value to 0:1200 or 1:2400 or
undetermined DAPBaudrate value. 2:4800.
13998 FFIipInput ConfigData Is Illegal Illegal IdVacDap configuration settings and Set 1<=DAPWaitTime>=30.
[DAPWaitTime] DAPWaitTime value.
13998 FFIipInput DAPWaitTime Nothing Illegal IdVacDap configuration settings and Set 1<=DAPWaitTime>=30.
undetermined DAPWaitTime value.
13998 FFIipInput ConfigData Is Illegal Illegal IdVacDap configuration settings and Set 1<=DAPTrialCount>=255.
[DAPTrialCount] DAPTrialCount value.
13998 FFIipInput DAPTrialCount Nothing Illegal IdVacDap configuration settings and Set 1<=DAPTrialCount>=255.
undetermined DAPTrialCount value.
13998 FFIipInput COMM Port Send Error A communication port transmission error. Check status of connected devices.
13998 FFIipInput Bad Directory Failure to acquire ConfigDB due to the Check ConfigDB.
13998 FFIipInput Not Found INI Key Failure to acquire ConfigDB due to the Check ConfigDB.
13998 FFIipInput DAPComPort Nothing Failure to acquire ConfigDB due to the Check ConfigDB.
13998 FFIipInput Not Fonud INI Key Failure to acquire ConfigDB due to the Check ConfigDB.
13998 FFIipInput Bad DSN Failure to acquire ConfigDB due to the Check ConfigDB.
13998 FFIipInput ComPortNo Error Failure to acquire ConfigDB due to the Check ConfigDB.
13998 FFIipInput DAPAddress Nothing Failure to acquire ConfigDB due to the Check ConfigDB.
13998 FFIipInput ConfigData Is Illegal [DAPAddress] Failure to acquire ConfigDB due to the Check ConfigDB.
13998 FFIipInput Not Read MDB Data Failure to acquire ConfigDB due to the Check ConfigDB.
13998 FFIipInput Create Mutex Error A mutex error occurred. Check to see if the system is up and running double.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-41
Appendix A CL Error Message Table Appx MT A-42
Event Event Source Description Causes Remedies Remarks
13998 FFIipInput COMM Port Open Error Failure to open a communication port. Check status of
connected devices.
13998 FFIipInput COMM Port Param Set Error Failure to set up communication port parameters. Check status of connected devices.
13998 FFIipInput _beginthreadex Create Failed Failure to create a thread. Check the machine load.
13998 FFIipInput COMM Port Close Error Failure to close a communication port. Check status of connected devices.
13998 FFIipInput Sub Thead Create Failed Failure to create a sub-thread. Check the machine load.
13998 FFIipInput Memory Alloc Error Memory allocation failure. Check the memory condition.
13998 FFIipInput Read Buffer Over Flow A read buffer overflow error. Restart. If the same error recurs even after restarting
the system, check the PC’s specification.
13998 FFIipInput Received UnKnown Code from An unknown code was received from the Restart. If the same error recurs even after restarting
CommPort communication port. the system, check the PC’s specification.
13998 FFIipInput Response Timeout A response timeout. Check status of connected devices.
13998 FFIipInput CreateError Failure to create a timer. Restart. If the same error recurs even after restarting
the system, check the PC’s specification.
13999 FFIipInput SetWSExposureDistance-010 Failure to set up a value to DDO. Restart.
14000 FFIipInput GetWSExposureDistance-010 Failure to acquire a value from DDO. Restart.
14001 FFIipInput SetCasetteThickness-010 Failure to set up a value to DDO. Restart.
14002 FFIipInput GetCasetteThickness-010 Failure to acquire a value from DDO. Restart.
14003 FFIipInput ProcImageCombine-600 Failure to acquire a value from DDO. Restart.
14004 FFIipInput Initialize-22-04 Failure to initialize the authentication dialog. Restart.
14006 FFIipInput UserControl_Terminate-1 Failure to close the authentication dialog. Restart.
14900 IIPInputEz %1 : Registry Value Get/Set An acquisition/setup key error. A registry information Check the registry key.
Error%n error.
[Key] %2%n
[Exp] %3%n
%4%n
%5
14900 IIPPortable %1 : Registry Value Get/Set Error A registry was damaged. ooo
[Key] %2
[Exp] %3
%4
%5
14901 IIPInputEz %1 : Database Connection Incorrect Directory.ini file character strings. Check the Directory.ini file. Also check the database
Error%n An incorrect database filename. Damaged database. filename.
[DB] %2%n
[Exp] %3%n
%4%n
%5

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-42
Appendix A CL Error Message Table Appx MT A-43
Event Event Source Description Causes Remedies Remarks
14901 IIPPortable %1 : Database Connection Error Failed in accessing the image database. There is no particular problem with operations.
[DB] %2
[Exp] %3
%4
%5
14902 IIPInputEz %1 : Database Data An acquisition/setup key error. A database error. Check the database table/filed name.
Get/Set Error%n
[DB] %2%n
[Table] %3%n
[Field] %4%n
[Exp] %5
14902 IIPPortable %1 : Database Data Get/Set Error Failed in accessing the image database. There is no particular problem with operations.
[DB] %2
[Table]%3
[Field]%4
[Exp]%5
14903 IIPInputEz %1 : DDO Data Get/Set A DDO acquisition/setup tag error. Check the DDO tag.
Error%n
[Tag] %2%n
%3%n
%4%n
%5
14903 IIPPortable %1 : DDO Data Get/Set Error The DDO file was damaged. There is no particular problem with operations.
[Tag] %2
%3
%4
%5
14904 IIPInputEz %1 : Other Error%n Other error. 78
[Procedure] %2%n
[ErrorCode] %3%n
[Exp] %4%n
%5
14904 IIPPortable %1: Other Error A general-purpose information event log. There is no particular problem with operations.
[Procedure] %2
[Error Code]%3
[Exp]%4
%5
19001 FFDICOMCommit SCU Initialization failed. DPM thread generation was unsuccessful. Restart.
[DPM Invoke fail] The system was unstable.
19001 FFDICOMCommit SCU Initialization failed. DPC thread generation was unsuccessful. Restart.
[DPC Invoke fail] The system was unstable.
19001 FFDICOMCommit SCU Initialization failed. [Insufficient Instance generation was unsuccessful. Restart.
memory] The system was unstable.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-43
Appendix A CL Error Message Table Appx MT A-44
Event Event Source Description Causes Remedies Remarks
19001 FFDICOMEchoSCU Initialization failed. DPM thread generation was unsuccessful. Restart.
[DPM Invoke fail] The system was unstable.
19001 FFDICOMEchoSCU Initialization failed. [Insufficient Instance generation was unsuccessful. Restart.
memory] The system was unstable.
19001 FFDICOMMPPSSCU Initialization failed. DPM thread generation was unsuccessful. Restart.
[DPM Invoke fail] The system was unstable.
19001 FFDICOMMPPSSCU Initialization failed. [Insufficient Instance generation was unsuccessful. Restart.
memory] The system was unstable.
19001 FFDICOMMWLSCU Initialization failed. DPM thread generation was unsuccessful. Restart.
[DPM Invoke fail] The system was unstable.
19001 FFDICOMMWLSCU Initialization failed. [Insufficient Instance generation was unsuccessful. Restart.
memory] The system was unstable.
19001 FFDICOMPrintSCU Initialization failed. DPM thread generation was unsuccessful. Restart.
[DPM Invoke fail] The system was unstable.
19001 FFDICOMPrintSCU Initialization failed. [Insufficient Instance generation was unsuccessful. Restart.
memory] The system was unstable.
19001 FFDICOMStoreSCP Initialization failed. DPM thread generation was unsuccessful. Restart.
[DPM Invoke fail] The system was unstable.
19001 FFDICOMStoreSCP Initialization failed. DPC thread generation was unsuccessful. Restart.
[DPC Invoke fail] The system was unstable.
19001 FFDICOMStoreSCP Initialization failed. [Insufficient Instance generation was unsuccessful. Restart.
memory] The system was unstable.
19001 FFDICOMStoreSCU Initialization failed. DPM thread generation was unsuccessful. Restart.
[DPM Invoke fail] The system was unstable.
19001 FFDICOMStoreSCU Initialization failed. [Insufficient Instance generation was unsuccessful. Restart.
memory] The system was unstable.
19002 FFDICOMCommit SCU Method Invoke failed. [PushPrc] A message was not successfully transmitted. Restart.
The system was unstable.
19002 FFDICOMCommit SCU Method Invoke failed. A message was not successfully transmitted. Restart.
[DiscontinueRequest] The system was unstable.
19002 FFDICOMEchoSCU Method Invoke failed. [EchoPrc] A message was not successfully transmitted. Restart.
The system was unstable.
19002 FFDICOMMPPSSCU Method Invoke failed. [CreatePrc] A message was not successfully transmitted. Restart.
The system was unstable.
19002 FFDICOMMPPSSCU Method Invoke failed. [SetPrc] A message was not successfully transmitted. Restart.
The system was unstable.
19002 FFDICOMMWLSCU Method Invoke failed. [FindPrc] A message was not successfully transmitted. Restart.
The system was unstable.
19002 FFDICOMMWLSCU Method Invoke failed. [CancelPrc] A message was not successfully transmitted. Restart.
The system was unstable.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-44
Appendix A CL Error Message Table Appx MT A-45
Event Event Source Description Causes Remedies Remarks
19002 FFDICOMPrintSCU Method Invoke failed. [PrintPrc] A message was not successfully transmitted. Restart.
The system was unstable.
19002 FFDICOMPrintSCU Method Invoke failed. [GetPrc] A message was not successfully transmitted. Restart.
The system was unstable.
19002 FFDICOMPrintSCU Method Invoke failed. A message was not successfully transmitted. Restart.
[DiscontinueRequest] The system was unstable.
19002 FFDICOMQRSCU Method lnvoke failed. [FindPrc] A message was not successfully transmitted. Restart.
The system was unstable.
19002 FFDICOMQRSCU Method lnvoke failed. [MovePrc] A message was not successfully transmitted. Restart.
The system was unstable.
19002 FFDICOMQRSCU Method lnvoke failed. [CancelPrc] A message was not successfully transmitted. Restart.
The system was unstable.
19002 FFDICOMQRSCU Method lnvoke failed. [FreePrc] A message was not successfully transmitted. Restart.
The system was unstable.
19002 FFDICOMStoreSCU Method Invoke failed. [StorePrc] A message was not successfully transmitted. Restart.
The system was unstable.
19003 FFDICOMCommit SCU File I/O failed. [Communication log A communication log file was not successfully opened. Although the communication log cannot be obtained,
file name] execution is possible.
19003 FFDICOMEchoSCU File I/O failed. [Communication log A communication log file was not successfully opened. Although the communication log cannot be obtained,
file name] execution is possible.
19003 FFDICOMMPPSSCU File I/O failed. [Communication log A communication log file was not successfully opened. Although the communication log cannot be obtained,
file name] execution is possible.
19003 FFDICOMMWLSCU File I/O failed. [Communication log A communication log file was not successfully opened. Although the communication log cannot be obtained,
file name] execution is possible.
19003 FFDICOMPrintSCU File I/O failed. [Communication log A communication log file was not successfully opened. Although the communication log cannot be obtained,
file name] execution is possible.
19003 FFDICOMStoreSCP File I/O failed. [Communication log An adequate disk space was not available. Check the available disk space.
file name]
19003 FFDICOMStoreSCP File I/O failed. [Communication log An image-related file was not successfully accessed. Restart. If the same symptom frequently occurs,
file name] The problem is attributable to a disk. replace the disk.
19003 FFDICOMStoreSCP File I/O failed. [Communication log A communication log file was not successfully opened. Although the communication log cannot be obtained,
file name] execution is possible.
19003 FFDICOMStoreSCU File I/O failed. [Communication log A communication log file was not successfully opened. Although the communication log cannot be obtained,
file name] execution is possible.
19900 IIPInputEz %1 : Registry Value The acquisition/setup key or registration information Check the registry key.
Get/Set Error%n was abnormal.
[Key] %2%n
[Exp] %3%n
%4%n
%5

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-45
Appendix A CL Error Message Table Appx MT A-46
Event Event Source Description Causes Remedies Remarks
19901 IIPInputEz %1 : Database Connection This error is attributable to an abnormal character Check Directory.ini or database file name.
Error%n string in Directory.ini, an incorrect database file name,
[DB] %2%n or a damaged database.
[Exp] %3%n
%4%n
%5
19902 IIPInputEz %1 : Database Data The acquisition/setup key or database was abnormal. Check the database table/field name.
Get/Set Error%n
[DB] %2%n
[Table] %3%n
[Field] %4%n
[Exp] %5
19903 IIPInputEz %1 : Dicom Data Object Get/Set The DDO acquisition/setup tag was abnormal. Check the DDO tag.
Error%n
[Tag] %2%n
[Exp] %3%n
%4%n
%5
19904 IIPInputEz %1 : Other Error%n [Procedure] Unknown error.
%2%n [ErrorCode] %3%n
[Exp] %4%n
%5
20001 FFCtrlProc It failed in CreateProcess. A subprocess was not successfully started up. The Restart. If the same symptom occurs after a restart, A subsystem name
It has the possibility that an system was unstable or a necessary executable file reinstall. is placed in the “%1”
executive file doesn’t exist. The was not found. position.
start treatment can’t be continued.
/CtrlProc:RunProc()
%1
20002 FFCtrlProc Process start information is An illegal parameter was used for process startup. Restart. If the same symptom occurs after a restart,
unusual. The start treatment can’t It is conceivable that the contents of the process reinstall.
be continued. /CtrlProc:RunProc() information database were wrong.
20003 FFCtrlProc It failed in the completion A process end request message was not successfully Restart.
message preparation treatment. created. It is conceivable that the available resource
The treatment can’t be continued. was not adequate or that the system was unstable.
/CtrlProc:EndProc()
20004 FFCtrlProc It failed in the completion A process end request message was not successfully Restart.
message transmitting treatment. transmitted. It is conceivable that the transmission
The treatment can’t be continued. destination process was down or that the transmission
/CtrlProc:EndProc() destination was wrong.
20005 FFCtrlProc It failed in the switching message A window show/hide message was not successfully Restart.
preparation treatment. The created. It is conceivable that the available resource
treatment can’t be continued. was not adequate or that the system was unstable.
/CtrlProc:ChangeProc()

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-46
Appendix A CL Error Message Table Appx MT A-47
Event Event Source Description Causes Remedies Remarks
20006 FFCtrlProc It failed in the switching message A window show/hide message was not successfully Restart. If the same symptom occurs after a restart,
transmitting treatment. The transmitted. It is conceivable that the transmission reinstall.
treatment can’t be continued. destination process was down or that the transmission
/CtrlProc:ChangeProc() destination was wrong.
20007 FFCtrlProc It failed in CreateProcess. A window show/hide message was not successfully Restart. If the same symptom occurs after a restart,
It has the possibility that an transmitted. It is conceivable that the transmission reinstall.
executive file doesn’t exist. The destination process was down or that the transmission
start treatment can’t be continued. destination was wrong.
/CtrlProc:SetInitProcEnd()
20102 FFCustomMsgBox [20102] Setup not completed. It is conceivable that the application key was not Install the application key. Main
installed.
20104 FFCustomMsgBox [20104] Failed in securing system It is conceivable that the file was damaged or deleted. Restart. If the same symptom occurs after a restart, Main
settings. reinstall.
20104 FFIIPMAIN It failed in the acquisition of the The configuration information was not successfully Restart. If the same symptom recurs, perform a
configuration information. The acquired. This error occurred due to an improper reinstallation.
initialization treatment can’t be installation or system instability.
continued. /MainProcess:Main()
20105 FFCustomMsgBox [20105] Failed in accessing the It is conceivable that the file was damaged or deleted. Restart. If the same symptom occurs after a restart, Main
process control database. reinstall.
20105 FFIIPMAIN It failed in the acquisition of the Data was not successfully acquired from the process Restart. If the same symptom recurs, perform a
process information data base. information database. reinstallation.
The initialization treatment can’ This error occurred due to an improper installation or
t be continued. /MainProcess: system instability.
Main()
20106 FFCustomMsgBox [20106] Failed in accessing the It is conceivable that the file was damaged or deleted. Restart. If the same symptom occurs after a restart, Main
message distribution control reinstall.
database.
20106 FFIIPMAIN It failed in opening of the message The message database was not successfully opened. Restart. If the same symptom recurs, perform a
data base. This error occurred due to an improper installation or reinstallation.
The initialization treatment can’ system instability.
t be continued. /MainProcess:
Main()
20108 FFCustomMsgBox [20108] Failed in process A subprocess was not successfully started up for View the event logs around to examine the cause. Main
activation. some reason.
20108 FFIIPMAIN It failed in the start of the sub- The subprocess was not successfully started. This Restart. If the same symptom recurs, perform a
process. error occurred due to an improper installation or reinstallation.
The initialization treatment can’ system instability.
t be continued. /MainProcess:
Main()

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-47
Appendix A CL Error Message Table Appx MT A-48
Event Event Source Description Causes Remedies Remarks
20110 FFCustomMsgBox [20110] Failed in initialization The subprocess was not successfully started. It is Check for error messages and warnings issued before Main
processing. conceivable that the system was unstable. This error the occurrence of this error and then take a remedial
may also occur as a consequence of the occurrence action.
of another error. Or, restart. If the same symptom recurs, perform a
reinstallation.
20110 FFIIPMAIN It failed in the start of the sub- The subprocess was not successfully started. This Restart. If the same symptom recurs, perform a
process. error occurred due to an improper installation or reinstallation.
The initialization treatment can’t system instability.
be continued.
/MainProcess:
m_ProcessControl_
OnRunProcComplete()
20111 — — The MAC address could not be acquired. Reinstall the network driver (delete it and then
reinstall). Or, manually acquire the MAC address with
the Service Utility’s MAC address acquisition function.
20118 FFCustomMsgBox [20118] Failed in process An error occurred for some reason during subprocess No particular remedy needs be taken. Main
termination. end processing.
20118 FFIIPMAIN It failed in the completion of the The subprocess was not successfully terminated. The Restart.
sub-process. system was unstable.
/MainProcess:
ProcessEndRequirement()
20124 FFCustomMsgBox [20124] Failed in process A subprocess was not successfully controlled for View the event logs around to examine the cause. Main
switchover. some reason.
20124 FFIIPMAIN It failed in switching of the A subprocess changeover was not successfully Restart.
process. /MainProcess:xxxxx effected. The target subprocess was not active or the
system was unstable.
21001 FFCustomMsgBox [21001] Failed in connecting to the The problem is attributable, for instance, to an inactive Check whether the SQL service manager is normally List
image database. SQL service manager or uninitialized image database. operating. If the symptom occurs while the SQL
service manager is normally operating, initialize
the image database (the entire image data is then
deleted).
21002 FFCustomMsgBox [21002] Failed in accessing the The problem is attributable, for instance, to an inactive Check whether the SQL service manager is normally List
image database. SQL service manager or uninitialized image database. operating. If the symptom occurs while the SQL
service manager is normally operating, initialize
the image database (the entire image data is then
deleted).
21003 FFCustomMsgBox [21003] Failed in obtaining The problem is attributable, for instance, to an inactive Check whether the SQL service manager is normally List
information from the image SQL service manager or uninitialized image database. operating. If the symptom occurs while the SQL
database. service manager is normally operating, initialize
the image database (the entire image data is then
deleted).

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-48
Appendix A CL Error Message Table Appx MT A-49
Event Event Source Description Causes Remedies Remarks
21004 FFCustomMsgBox [21004] Failed in accessing the The problem is attributable, for instance, to an inactive Check whether the SQL service manager is normally List
image database. SQL service manager or uninitialized image database. operating. If the symptom occurs while the SQL
service manager is normally operating, initialize
the image database (the entire image data is then
deleted).
21005 FFCustomMsgBox [21005] Failed in setting The problem is attributable, for instance, to an inactive Check whether the SQL service manager is normally List
information to the image database. SQL service manager or uninitialized image database. operating. If the symptom occurs while the SQL
service manager is normally operating, initialize
the image database (the entire image data is then
deleted).
21006 FFCustomMsgBox [21006] Failed in deleting the The problem is attributable, for instance, to an inactive Check whether the SQL service manager is normally List
study information. SQL service manager or uninitialized image database. operating. If the symptom occurs while the SQL
service manager is normally operating, initialize
the image database (the entire image data is then
deleted).
21007 FFCustomMsgBox [21007] Failed in connecting to the It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a List
system setting database. or deleted. reinstallation.
21008 FFCustomMsgBox [21008] Failed in accessing the It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a List
system setting database. or deleted. reinstallation.
21009 FFCustomMsgBox [21009] Failed in obtaining It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a List
information from the system or deleted. reinstallation.
setting database.
21010 FFCustomMsgBox [21010] Failed in connecting to the It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a List
character database. or deleted. reinstallation.
21011 FFCustomMsgBox [21011] Failed in accessing the It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a List
character database. or deleted. reinstallation.
21012 FFCustomMsgBox [21012] Failed in obtaining It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a List
information from the character or deleted. reinstallation.
database.
21013 FFCustomMsgBox [21013] Failed in accessing the It is conceivable that the file was damaged or deleted. Restart. If the same symptom recurs, perform a List
definition file. reinstallation.
21014 FFCustomMsgBox [21014] Failed in opening the It is conceivable that the registry information was Restart. If the same symptom recurs, perform a List
registry information. damaged or deleted. reinstallation.
21015 FFCustomMsgBox [21015] Failed in retrieving the It is conceivable that the registry information was Restart. If the same symptom recurs, perform a List
registry information. damaged or deleted. reinstallation.
21016 FFCustomMsgBox [21016] Failed in writing the It is conceivable that the registry information was Restart. If the same symptom recurs, perform a List
registry information. damaged or deleted. reinstallation.
21017 FFCustomMsgBox [21017] Failed in closing the It is conceivable that the registry information was Restart. If the same symptom recurs, perform a List
registry information. damaged or deleted. reinstallation.
21018 FFCustomMsgBox [21018] Failed in receiving The system was unstable. Restart. If the same symptom recurs, perform a List
message. reinstallation.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-49
Appendix A CL Error Message Table Appx MT A-50
Event Event Source Description Causes Remedies Remarks
21019 FFCustomMsgBox [21019] Failed in canceling the The selected image was being output or already No particular response is required. List
output processing. deleted.
21020 FFCustomMsgBox [21020] Failed in output. The selected image was being output or already No particular response is required. List
deleted.
21021 FFCustomMsgBox [21021] Failed in receiving the The system was unstable. No particular response is required. List
message.
21022 FFCustomMsgBox [21022] Failed in initializing The system was unstable. Restart. If the same symptom recurs, perform a List
process for message reinstallation.
communication.
21023 FFCustomMsgBox [21023] Failed in terminating The system was unstable. Restart. If the same symptom recurs, perform a List
process for message reinstallation.
communication.
21024 FFCustomMsgBox [21024] Failed in obtaining It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a List
information from the host setting or deleted. reinstallation.
database.
21025 FFCustomMsgBox [21025] Failed in editing the host The system was unstable. Restart. If the same symptom recurs, perform a List
setting database. reinstallation.
21030 FFCustomMsgBox [21030] Failed in study start. Connection equipment was not operative or the Check the connected equipment or network. List
network was unstable.
21031 FFCustomMsgBox [21031] Failed in QA start. Connection equipment was not operative or the Check the connected equipment or network. List
network was unstable.
21032 FFCustomMsgBox [21032] Failed in study re-start. Connection equipment was not operative or the Check the connected equipment or network. List
network was unstable.
21033 FFCustomMsgBox [21033] Failed in obtaining study Connection equipment was not operative or the Check the connected equipment or network. List
information from host %s. network was unstable.
21034 FFCustomMsgBox [21034] Failed in locking the study. Connection equipment was not operative or the Check the connected equipment or network. List
network was unstable.
21035 FFCustomMsgBox [21035] Failed in study completion Connection equipment was not operative or the Check the connected equipment or network. List
processing. network was unstable.
21036 FFCustomMsgBox [21036] The target study exists but Connection equipment was not operative or the Check the connected equipment or network. List
is not displayed on the list. network was unstable.
21037 FFCustomMsgBox [21037] The target study could not The specified study may have been deleted. No particular measures need to be taken. List
be found.
21038 FFCustomMsgBox [21038] The input format for date The input format was incorrect. No particular measures need to be taken. List
is wrong.
21039 FFCustomMsgBox [21039] The input format for time The input format was incorrect. No particular measures need to be taken. List
is wrong.
21040 FFCustomMsgBox [21040] Searched word is illegal. The input word was incorrect. No particular measures need to be taken. List
21041 FFCustomMsgBox [21041] Multiple target studies Two or more relevant studies existed. No particular measures need to be taken. List
exist. The study cannot be started.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-50
Appendix A CL Error Message Table Appx MT A-51
Event Event Source Description Causes Remedies Remarks
21051 FFCustomMsgBox [21051] An unknown study was - Software version A06 or earlier was used for MWM - Upgrade the software to version A07 or later.
received from the RIS. connection. - Check the RIS side setup information and the like.
- Illegal data was contained in the study information
received from the RIS.
21052 FFMWMHelper [MWMHelper]%1 This is an information log. There is no particular problem with operations.
21053 FFMWMHelper [MWMHelper]%1 A warning condition is encountered. There is no particular problem with operations.
For details, refer to the contents of the event log.
21054 FFMWMHelper [MWMHelper]%1 An error occurred. Restart.
A study received by means of MWM didn’t include
StudyInstanceUID (0020,000D). Request the MWM
Server to send StudyInstanceUID.
21101 FFCustomMsgBox [21101] An error of unknown The system was unstable. Restart. If the same symptom recurs, perform a List
cause occurred. reinstallation.
21102 FFCustomMsgBox [21102] Failed in obtaining study A specified study has already been deleted. No particular response is required. List
information.
21103 FFCustomMsgBox [21103] Unable to specify a target Destination for move was specified incorrectly. No particular response is required. List
destination for move.
21104 FFCustomMsgBox [21104] Unable to specify a target Destination for move was specified incorrectly. No particular response is required. List
destination for move.
21105 FFCustomMsgBox [21105] Unable to move an image. Destination for move was specified incorrectly. No particular response is required. List
21106 FFCustomMsgBox [21106] A study information display The study information included illegal data. Check study data setting. List
error occurred.
21129 FFCustomMsgBox [21129] The hard disk was full. - The free hard disk space was insufficient. - Delete unnecessary images. If any images are left Main
- The shuttering process was used with software without being output, output them.
version A07 or earlier. Or, a forced termination - Upgrade the software to version A08 or later and
procedure was performed during a startup or freeze then initialize the image database.
(when version A07 or earlier was used).
21201 FFCustomMsgBox [21201] An error of unknown The system was unstable. Restart. If the same symptom recurs, perform a List
cause occurred. reinstallation.
21202 FFCustomMsgBox [21202] Initialization has not been The system was unstable. Restart. If the same symptom recurs, perform a List
completed. reinstallation.
21203 FFCustomMsgBox [21203] Radiographer information It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a List
database is abnormal. or deleted. reinstallation.
21204 FFCustomMsgBox [21204] Failed in obtaining the The system was unstable. Restart. If the same symptom recurs, perform a List
registry information. reinstallation.
21205 FFCustomMsgBox [21205] Failed in setting registry The system was unstable. Restart. If the same symptom recurs, perform a List
values. reinstallation.
21206 FFCustomMsgBox [21206] Failed in clearing a The system was unstable. Restart. If the same symptom recurs, perform a List
displayed image. reinstallation.
21207 FFCustomMsgBox [21207] Failed in connecting to the Connection equipment was not operative or the Check other connected equipment or network. List
database. network was unstable.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-51
Appendix A CL Error Message Table Appx MT A-52
Event Event Source Description Causes Remedies Remarks
21208 FFCustomMsgBox [21208] Failed in connecting to the Connection equipment was not operative or the Check other connected equipment or network. List
database. network was unstable.
21209 FFCustomMsgBox [21209] Failed in setting the study The system was unstable. Restart. If the same symptom recurs, perform a List
information sharing host. reinstallation.
21210 FFCustomMsgBox [21210] Failed in obtaining It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a List
the study information from the or deleted. reinstallation.
database.
21211 FFCustomMsgBox [21211] An error of unknown cause It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a List
occurred in obtaining radiographer or deleted. reinstallation.
information.
21212 FFCustomMsgBox [21212] An error of unknown The system was unstable. Restart. If the same symptom recurs, perform a List
cause occurred. reinstallation.
21213 FFCustomMsgBox [21213] An error of unknown The system was unstable. Restart. If the same symptom recurs, perform a List
cause occurred. Study information reinstallation.
cannot be obtained.
21214 FFCustomMsgBox [21214] Failed in starting remote The system was unstable. Restart. If the same symptom recurs, perform a List
search/acquisition processing. reinstallation.
22100 FFIIPListMoveImage Warning. A warning was issued. For details, see the contents of There is no particular problem with operations.
%1 the event log.
22103 FFIIPMAIN It failed in the acquisition of the The version information was not successfully Reinstall.
configuration information. The acquired. It is conceivable that the Version.env file did
initialization treatment can’t be not exist in the specified directory or that the contents
continued. /MainProcess:Main() of the file were damaged.
22128 FFIIPMAIN An error occurred in logfile backup A log file backup was not successfully made. It Reinstall. (Although there are no operational
treatment. /MainProcess:xxxxx is conceivable that the specified pathname was problems, various communication logs cannot be
incorrect. saved.)
22200 FFIIPListMoveImage Error. An error occurred. For details, see the contents of the Since the process was aborted due to an error
%1 event log. occurrence, it is conceivable that a data inconsistency
may exist. Verify the data consistency.
22201 FFIIPListMoveImage Initialize Error. The initialization process failed. Restart.
%1
22201 FFPDIWizardCom %1%n%2%n An attempt to obtain the registry information failed. Restart.
Failed in obtaining the registry
information.
22202 FFIIPListMoveImage FFGetString Error. The FFGetString function returned an error. Restart.
%1
22202 FFPDIWizardCom %1%n%2%n An attempt to read the Directory.ini file failed. Make sure that the Directory.ini file is correct and
Failed in reading of the restart.
configuration file (Directory. ini).
22203 FFIIPListMoveImage DB Connect Error. The database connection was not successfully Restart.
%1 established.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-52
Appendix A CL Error Message Table Appx MT A-53
Event Event Source Description Causes Remedies Remarks
22203 FFPDIWizardCom %1%n%2%n The SysConfig.mdb file may have been damaged. Check the SysConfig.mdb file.
Failed in accessing the system
setting database.
22204 FFIIPListMoveImage DB Get Error. Data could not be acquired from the database. Restart.
%
22204 FFPDIWizardCom %1%n%2%n The LangStr.mdb file may have been damaged. Check the LangStr.mdb file.
Failed in accessing the character
database.
22205 FFIIPListMoveImage SetDB Error. Data could not be set up for the database. Restart.
%1
22205 FFPDIWizardCom %1%n%2%n The SQL server service manager has not been Make sure that the SQL server has been started.
Failed in accessing the image started, because, for example, a necessary file was
database. not installed.
22206 FFIIPListMoveImage Dicom Data Object Get Error. Data could not be acquired from the Dicom Data Restart.
%1 Object.
22206 FFPDIWizardCom %1%n%2%n An error occurred in the image processing server. Restart.
An error occurred in an
imageprocessing server.
22207 FFIIPListMoveImage Dicom Data Object Set Error. Data could not be set up for the Dicom Data Object. Restart.
%1
22207 FFPDIWizardCom %1%n%2%n An error occurred in the PDI control library. Restart.
An error occurred in a PDIcontrol
library.
22208 FFIIPListMoveImage Dicom Data Object Set Error. An exception error occurred. Restart.
%1
22208 FFPDIWizardCom %1%n%2%n A error occurred in the DICOM object. Restart.
An error occurred in the
DicomDataObject.
22209 FFPDIWizardCom %1%n%2%n An error occurred in a function that was called up. Restart.
An error occurred in the called
function.
22211 FFPDIWizardCom %1%n An exceptional error occurred. Restart.
An exception error occurred.
23000 FFMWMStudyList RegCreatekey() returned with The RegCreateKey function returned an error. Restart.
Error at %1.
[%2]
23000 FFStudyList, RegCreatekey() returned with The user authority may not have been granted or Use the normal startup procedure or perform
FFOutputList Error at %1.%n[%2] installation may have been ended abnormally. reinstallation.
23000 FFIIPListCustomize RegCreatekey() returned with The user authority may not have been granted or Use the normal startup procedure or perform
Error at %1.%n[%2] installation may have been ended abnormally. reinstallation.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-53
Appendix A CL Error Message Table Appx MT A-54
Event Event Source Description Causes Remedies Remarks
23000 FFIIPListSearch RegCreatekey() returned with The user authority may not have been granted or Use the normal startup procedure or perform
Error at %1.%n[%2] installation may have been ended abnormally. reinstallation.
23000 FFIIPListMoveImage Information. Information log. There are no operational problems.
%1
23000 FFMWMStudyList Study couldn’t be started Failed in starting a study automatically for any reason. There are no operational problems.
automatically. %1.
[%2]
23001 FFMWMStudyList RegOpenkey() returned with Error The RegOpenKey function returned an error. Restart.
at %1.
[%2]
23001 FFStudyList, RegOpenkey() returned with Error The user authority may not have been granted or Use the normal startup procedure or perform
FFOutputList at %1.%n[%2] installation may have been ended abnormally. reinstallation.
23001 FFIIPListCustomize RegOpenkey() returned with Error The user authority may not have been granted or Use the normal startup procedure or perform
at %1.%n[%2] installation may have been ended abnormally. reinstallation.
23001 FFIIPListSearch RegOpenkey() returned with Error The user authority may not have been granted or Use the normal startup procedure or perform
at %1.%n[%2] installation may have been ended abnormally. reinstallation.
23001 FFMWMStudyList RegOpenkey() returned with Error Failed in opening the registry (an error occurred with Restart.
at %1. the program or the system was unstable).
[%2]
23001 FFMediaList RegOpenKey()returnedwithError The RegOpenKey function returned an error. Restart.
at %1.
[%2]
23002 FFMWMStudyList RegClosekey() returned with Error The RegOpenKey function returned an error. Restart.
at %1.
[%2]
23002 FFStudyList, RegClosekey() returned with Error The user authority may not have been granted. Use the normal startup procedure.
FFOutputList at %1.%n[%2]
23002 FFIIPListCustomize RegClosekey() returned with Error The user authority may not have been granted. Use the normal startup procedure.
at %1.%n[%2]
23002 FFIIPListSearch RegClosekey() returned with Error The user authority may not have been granted. Use the normal startup procedure.
at %1.%n[%2]
23002 FFMWMStudyList RegClosekey() returned with Error Failed in closing the registry (an error occurred with Restart.
at %1. the program or the system was unstable).
[%2]
23002 FFMediaList RegCloseKey() returned withError The RegCloseKey function returned an error. Restart.
at %1.
[%2]
23003 FFMWMStudyList RegQueryNumericValue() The RegOpenKey function returned an error. Restart.
returned with Error at %1.
[%2]

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-54
Appendix A CL Error Message Table Appx MT A-55
Event Event Source Description Causes Remedies Remarks
23003 FFStudyList, RegQueryNumericValue() The user authority may not have been granted. Use the normal startup procedure.
FFOutputList returned with Error at %1.%n[%2]
23003 FFIIPListCustomize RegQueryNumericValue() The user authority may not have been granted. Use the normal startup procedure.
returned with Error at %1.%n[%2]
23003 FFIIPListSearch RegQueryNumericValue() The user authority may not have been granted. Use the normal startup procedure.
returned with Error at %1.%n[%2]
23003 FFMWMStudyList RegQueryNumericValue() Failed in acquiring data from the registry or the Restart.
returned with Error at %1. program may not have been installed properly.
[%2]
23003 FFMediaList RegQueryNumericValue()returned The RegQueryNumericValue function returned an Restart.
with Error at %1. error.
[%2]
23004 FFMWMStudyList RegSetNumericValue() returned The RegOpenKey function returned an error. Restart.
with Error at %1.
[%2]
23004 FFStudyList, RegSetNumericValue() returned The user authority may not have been granted. Use the normal startup procedure.
FFOutputList with Error at %1.%n[%2]
23004 FFIIPListCustomize RegSetNumericValue() returned The user authority may not have been granted. Use the normal startup procedure.
with Error at %1.%n[%2]
23004 FFIIPListSearch RegSetNumericValue() returned The user authority may not have been granted. Use the normal startup procedure.
with Error at %1.%n[%2]
23004 FFMWMStudyList RegSetNumericValue() returned Failed in writing data in the registry (an error occurred Restart.
with Error at %1. with the program or the system was unstable).
[%2]
23004 FFMediaList RegSetNumericValue()returned The RegSetNumericValue function returned an error. Restart.
with Error at %1.
[%2]
23005 FFIIPListCustomize FFGetString() returned with Error The problem is attributable to a damaged Directory.ini Ensure that the Directory.ini file is normal, and then
at %1.%n[%2] file. restart.
23005 FFIIPListSearch FFGetString() returned with Error The problem is attributable to a damaged Directory.ini Ensure that the Directory.ini file is normal, and then
at %1.%n[%2] file. restart.
23005 FFMWMStudyList FFGetString() returned with Error The FFGetString function returned an error. Restart.
at %1. [%2]
23005 FFMWMStudyList FFGetString() returned with Error The FFGetString function failed. Perform a reinstallation or restart.
at %1. This problem is attributable to an improper installation.
[%2]
23005 FFStudyList, FFOutputList FFGetString() returned with Error The problem is attributable to a damaged Directory.ini Ensure that the Directory.ini file is normal, and then
at %1.%n[%2] file. restart.
23005 FFMediaList FFGetString() returned with Error The FFGetString function returned an error. Restart.
at %1.
[%2]

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-55
Appendix A CL Error Message Table Appx MT A-56
Event Event Source Description Causes Remedies Remarks
23006 FFIIPListCustomize FFStrDBConnect() returned with The problem is attributable to a damaged Directory.ini Ensure that the Directory.ini file is normal, and then
Error at %1.%n[%2] file or missing LangStr.mdb file. restart. Or, check the LangStr.mdb file.
23006 FFIIPListSearch FFStrDBConnect() returned with The problem is attributable to a damaged Directory.ini Ensure that the Directory.ini file is normal, and then
Error at %1.%n[%2] file or missing LangStr.mdb file. restart. Or, check the LangStr.mdb file.
23006 FFMWMStudyList FFStrDBConnect() returned with The FFStrDBConnect function failed. Perform a reinstallation or restart.
Error at %1. [%2] The problem is due to an improper installation or
system instability.
23006 FFMWMStudyList FFStrDBConnect() returned with The FFStrDBConnect function returned an error. Restart.
Error at %1.
[%2]
23006 FFStudyList, FFOutputList FFStrDBConnect() returned with The problem is attributable to a damaged Directory.ini Ensure that the Directory.ini file is normal, and then
Error at %1.%n[%2] file or missing LangStr.mdb file. restart. Or, check the LangStr.mdb file.
23006 FFMediaList FFStrDBConnect() returned with The FFStrDBConnect function returned an error. Restart.
Error at %1.
[%2]
23007 FFMWMStudyList FFStrDBClose() returned with The FFStrDBClose function returned an error. Restart.
Error at %1.
[%2]
23007 FFIIPListCustomize FFStrDBClose() returned with The LangStr.mdb file was damaged. Check the LangStr.mdb file.
Error at %1.%n[%2]
23007 FFIIPListSearch FFStrDBClose() returned with The LangStr.mdb file was damaged. Check the LangStr.mdb file.
Error at %1.%n[%2]
23007 FFMWMStudyList FFStrDBClose() returned with The FFStrDBClose function failed. Restart.
Error at %1.
[%2]
23007 FFStudyList, FFOutputList FFStrDBClose() returned with The LangStr.mdb file was damaged. Check the LangStr.mdb file.
Error at %1.%n[%2]
23007 FFMediaList FFStrDBClose() returned with The FFStrDBClose function returned an error. Restart.
Error at %1.
[%2]
23008 FFIIPListCustomize FFStrDBReadString() returned The LangStr.mdb file was damaged. Check the LangStr.mdb file.
with Error at %1.%n[%2]
23008 FFIIPListSearch FFStrDBReadString() returned The LangStr.mdb file was damaged. Check the LangStr.mdb file.
with Error at %1.%n[%2]
23008 FFMWMStudyList FFStrDBReadString() returned The FFStrDBReadString function returned an error. Restart.
with Error at %1. [%2]
23008 FFMWMStudyList FFStrDBReadString() returned The FFStrDBReadString function failed. Perform a reinstall or restart.
with Error at %1. [%2] The problem is attributable to an improper installation.
23008 FFStudyList, FFOutputList FFStrDBReadString() returned The LangStr.mdb file was damaged. Check the LangStr.mdb file.
with Error at %1.%n[%2]

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-56
Appendix A CL Error Message Table Appx MT A-57
Event Event Source Description Causes Remedies Remarks
23008 FFMediaList FFStrDBReadString() returned The FFStrDBReadString function returned an error. Restart.
with Error at %1.
[%2]
23009 FFIIPListCustomize FFRegGetKeySZ() returned with The problem is attributable to an unprivileged user. Use the normal startup procedure.
Error at %1.%n[%2]
23009 FFIIPListSearch FFRegGetKeySZ() returned with The problem is attributable to an unprivileged user. Use the normal startup procedure.
Error at %1.%n[%2]
23009 FFMWMStudyList FFRegGetKeySZ() returned with The FFRegGetKeySZ function returned an error. Restart.
Error at %1.
[%2]
23009 FFMWMStudyList FFRegGetKeySZ() returned with The FFRegGetKeySZ function failed. Perform a reinstall or restart.
Error at %1. This error is attributable to an improper installation.
[%2]
23009 FFStudyList, FFOutputList FFRegGetKeySZ() returned with The problem is attributable to an unprivileged user. Use the normal startup procedure.
Error at %1.%n[%2]
23009 FFMediaList FFRegGetKeySZ() returned with The FFRegGetKeySZ function returned an error. Restart.
Error at %1.
[%2]
2300A FFMWMStudyList FFRegGetKeyDWORD() returned The FFRegGetKeyDWORD function failed. This error Perform a reinstallation or restart.
with Error at %1. [%2] is attributable to an improper IIP installation.
23010 FFIIPListCustomize FFRegGetKeyDWORD() returned The problem is attributable to an unprivileged user. Use the normal startup procedure.
with Error at %1.%n[%2]
23010 FFIIPListSearch FFRegGetKeyDWORD() returned The problem is attributable to an unprivileged user. Use the normal startup procedure.
with Error at %1.%n[%2]
23010 FFMWMStudyList FFRegGetKeyDWORD() returned The FFRegGetKeyDWORD function returned an Restart.
with Error at %1. [%2] error.
23010 FFStudyList, FFOutputList FFRegGetKeyDWORD() returned The problem is attributable to an unprivileged user. Use the normal startup procedure.
with Error at %1.%n[%2]
23010 FFMediaList FFRegGetKeyDWORD() returned The FFRegGetKeyDWORD function returned an Restart.
with Error at %1. error.
[%2]
23011 FFStudyList, FFOutputList FFSysDBConnect() returned with It is conceivable that the Directory.ini file was Ensure that the Directory.ini file is normal, and then
Error at %1.%n[%2] damaged or the Hosts.mdb file did not exist. restart. Or, check the SysConfig.mdb file.
23011 FFIIPListCustomize FFHostDBInitialize() returned with It is conceivable that the Directory.ini file was Ensure that the Directory.ini file is correct, and then
Error at %1.%n[%2] damaged or the Hosts.mdb file did not exist. restart the system or check the SysConfig.mdb file.
23011 FFMWMStudyList FFHostDBInitialize() returned with FFHostDBInitialize() sent back an error. Restart the system.
Error at
%1. [%2]
23011 FFMediaList FFHostDBInitialize() returned with FFHostDBInitialize() returned an error. Restart.
Error at %1.
[%2]

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-57
Appendix A CL Error Message Table Appx MT A-58
Event Event Source Description Causes Remedies Remarks
23012 FFStudyList, FFOutputList FFSysDBClose() returned with This error is attributable to a damaged Directory.ini Check the SysConfig.mdb file.
Error at %1.%n[%2] file.
23012 FFIIPListCustomize FFHostDBGetQueryHost() It is conceivable that the Hosts.mdb file was damaged. Check the Hosts.mdb file.
returned with Error at %1.%n[%2]
23012 FFMWMStudyList FFHostDBGetQueryHost() FFHostDBGetQueryHost() sent back an error. Restart the system.
returned with Error at
%1. [%2]
23012 FFMediaList FFHostDBGetQueryHost() FFHostDBGetQueryHost() returned an error. Restart.
returned with Error at %1.
[%2]
23013 FFStudyList, FFOutputList FFSysDBReadszValue() returned This error is attributable to a damaged Directory.ini Check the SysConfig.mdb file.
with Error at %1.%n[%2] file.
23013 FFIIPListCustomize FFHostDBSetQueryHost() It is conceivable that the Hosts.mdb file was damaged. Check the Hosts.mdb file.
returned with Error at %1.%n[%2]
23013 FFMWMStudyList FFHostDBSetQueryHost() FFHostDBSetQueryHost() sent back an error. Restart the system.
returned with Error at
%1. [%2]
23013 FFMediaList FFHostDBSetQueryHost() FFHostDBSetQueryHost() returned an error. Restart.
returned with Error at %1.
[%2]
23014 FFStudyList, FFOutputList FFSysDBReadnValue() returned This error is attributable to a damaged Directory.ini Check the SysConfig.mdb file.
with Error at %1.%n[%2] file.
23014 FFMediaList FFSysDBReadnValue() returned It is conceivable that the SysConfig.mdb file was Restart.
with Error at %1.%n damaged.
[%2]
23014 FFMWMStudyList Failed WorkListDB Open It is conceivable that the SQL Server Service Manager Ensure that the SQL Sever is running.
Recordset at %1.%n is not running or necessary files are not installed.
[%2]
23015 FFStudyList, FFOutputList Failed ImageDB Connection at The SQL Server Service Manager starts running or Ensure that the SQL Server is running.
%1.%n[%2] necessary files are not installed.
23015 FFMediaList Failed ImageDB Connection at It is conceivable that the SQL Server Service Manager Ensure that the SQL Server is running.
%1.%n is not running or necessary files are not installed.
[%2]
23015 FFMWMStudyList Failed WorkListDB Close It is conceivable that the SQL Server Service Manager Ensure that the SQL Sever is running.
Recordset at %1.%n is not running or necessary files are not installed.
[%2]
23016 FFStudyList, FFOutputList Failed ImageDB Disconnection at The SQL Server Service Manager starts running or Ensure that the SQL Server is running.
%1.%n[%2] necessary files are not installed.
23016 FFMWMStudyList Failed ReleasePossession at Release of the possessive right failed. Ensure that the SQL Sever is running.
%1.%n
[%2]

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-58
Appendix A CL Error Message Table Appx MT A-59
Event Event Source Description Causes Remedies Remarks
23017 FFStudyList, FFOutputList Failed ImageDB Open Recordset The SQL Server Service Manager starts running or Ensure that the SQL Server is running.
at %1.%n[%2] necessary files are not installed.
23018 FFStudyList, FFOutputList Failed ImageDB Update The SQL Server Service Manager starts running or Ensure that the SQL Server is running.
Recordset at %1.%n[%2] necessary files are not installed.
23019 FFStudyList, FFOutputList Failed ImageDB Close Recordset The SQL Server Service Manager starts running or Ensure that the SQL Server is running.
at %1.%n[%2] necessary files are not installed.
23020 FFStudyList Failed Get HostName as Failed in acquiring a host name. Check the network/network settings.
%1.%n[%2] The network may have been set up incorrectly.
23020 FFMediaList Failed Get HostName as Failed in acquiring a host name. Check the network/network settings.
%1.%n[%2] The network may have been set up incorrectly.
23021 FFStudyList Failed HostDB Data at %1.%n[%2] Failed in acquiring data from the Hosts.mdb file. The Check the Hosts.mdb file.
database may have been damaged.
23021 FFMediaList Failed HostDB Data at %1.%n Failed in acquiring data from the Hosts.mdb file. The Check the Hosts.mdb file.
[%2] database may have been damaged.
23022 FFStudyList Failed GetPossession at Failed in acquiring property. Check the network/equipment.
%1.%n[%2] It is conceivable that any other equipment has already
acquired property, network disconnected or power not
turned ON.
23022 FFStudyList Failed GetPossession at %1.%n Failed in acquiring property. Check the network/equipment.
[%2] It is conceivable that any other equipment has already
acquired property, network disconnected or power not
turned ON.
23023 FFMediaList Error Occurred.%n An error occurred for any reason. Restart.
23023 FFStudyList Failed DDOChangeOrDelivery at A failure occurred in file change or delivery processing Restart the system.
%1.%n[%2] at film division/extension (12on1) output.
23024 FFStudyList Failed DicomQ/R at %1.%n[%2] A failure occurred when performing DICOM Q/R Check the network/network settings, and then restart
processing. the system as necessary.
23025 FFStudyList FFNetDBConnect() returned with An attempt to establish connection to the network Check NetConfig.mdb and restart the system.
Error at %1.%n [%2] setup database resulted in a failure.
23026 FFStudyList Failed DicomQ/R Initialize at A failure occurred in initialization of DICOM Q/R Restart the system.
%1.%n[%2] processing.
23027 FFStudyList Failed MultiPrintDDOUpdate at A failure occurred in file change processing at film Restart the system.
%1.%n[%2] division/extension (12on1) output.
23028 FFStudyList Failed MultiPrintDelivery A failure occurred in delivery processing at film Restart the system.
%1.%n[%2] division/extension (12on1) output.
23029 FFStudyList Failed FFNetDBGet %1.%n[%2] An attempt to acquire data from the network setup Check NetConfig.mdb and restart the system.
database resulted in a failure.
23031 FFStudyList ctl_ListPatient_ExecutePDI ()() A PDI processing error occurred. Restart.
returned with Error at %1.%n

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-59
Appendix A CL Error Message Table Appx MT A-60
Event Event Source Description Causes Remedies Remarks
23099 FFIIPListCustomize An unknown error An unknown error occurred. Restart.
occurred.%n[%1]
23099 FFIIPListSearch An unknown error An unknown error occurred. Restart.
occurred.%n[%1]
23099 FFMWMStudyList An unknown error occurred. [%1] An exception error occurred. Restart.
23099 FFMWMStudyList An unknown error occurred. [%1] An unknown error occurred. This error is attributable Restart.
to system instability.
23099 FFStudyList, FFOutputList An unknown error An unknown error occurred. Restart.
occurred.%n[%1]
23099 FFMediaList An unknown error occurred. An exception error occurred. Restart.
[%1]
23108 FFIIPMAIN It failed in the start of the sub- A subprocess was not successfully started up. It Restart. If the same symptom occurs after a restart,
process. is conceivable that installation was not properly reinstall.
The initialization treatment can’ completed or that the system was unstable.
t be continued. /MainProcess:
Main()
23118 FFIIPMAIN It failed in the completion of the A subprocess was not successfully ended. Restart.
sub-process. It is conceivable that the system was unstable.
/MainProcess:
ProcessEndRequirement()
23124 FFIIPMAIN It failed in switching of the Subprocess switching was not successfully performed. Restart.
process. /MainProcess:xxxxx It is conceivable that the target subprocess was not
running or that the system was unstable.
24001 FFCustomMsgBox [24001] Selected study information This dialog box opens for confirmation only. No particular response is required. List
will be fully deleted.
24002 FFCustomMsgBox [24002] No items displayed. There were no items to be displayed in the list. Select at least one display item. List
24003 FFCustomMsgBox [24003] The item width is too The maximum display width was exceeded by the Enter a smaller value. List
large. specified value.
24004 FFCustomMsgBox [24004] Cancels the selected This dialog box opens for confirmation only. List
output request.
24005 FFCustomMsgBox [24005] The search target string No data matched the entered search criteria. List
“%S” was not found.
24057 FFCustomMsgBox [24057 ] Unable to receive The system was unstable. Restart. If the same symptom recurs, perform a List
information from the RIS trigger reinstallation.
transmitter.
24062 FFCustomMsgBox [24062] Failed in changing the The system was unstable. Restart. If the same symptom recurs, perform a Worklist
host setting. reinstallation.
29001 FFCustomMsgBox [29001] Unexpected operational It is highly probable that the program was faulty. List
message received from the output
process.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-60
Appendix A CL Error Message Table Appx MT A-61
Event Event Source Description Causes Remedies Remarks
29002 FFCustomMsgBox [29002] Unexpected command It is highly probable that the program was faulty. List
message received from the output
process.
29010 FFIIPEvtMonitoringCtrl [%1]%nThe error occurred in The Win32 API function returned an error. Restart. Worklist
Win32 API.%n%2
29011 FFIIPEvtMonitoringCtrl [%1]%nThe exception error An exception error occurred. Restart.
occurred.%n%2
29107 FFIIPMAIN It failed in the preparation of the The pipe for inter-process communication was not Restart.
pipe. The treatment can’t be successfully created.
continued. /MainProcess:Main() It is conceivable that the system was unstable.
29112 FFIIPMAIN It failed in the indication of The routine transition instruction message was not Restart. If the same symptom occurs after a restart,
the routine mode transition. / successfully issued. reinstall.
MainProcess: It is conceivable that the subprocess was not running
m_ProcessControl or that the pipe was not created.
_OnRunProcComplete()
29114 FFIIPMAIN An unusual message was The received message was unusual. Restart. If the same symptom occurs after a restart,
received. This message is ignored. It is conceivable that the message was not registered reinstall.
/MainProcess: in the message information database or that the
m_ProcessComControl system was unstable.
_OnRecvNotification()
29115 FFIIPMAIN An unusual send cause was A message was received from an unknown source. It Restart. If the same symptom occurs after a restart,
received. This send cause is is conceivable that the transmission source was not reinstall.
ignored. registered in the message information database or
/MainProcess: that a wrong transmission source was selected.
m_ProcessComControl
_OnRecvNotification()
29116 FFIIPMAIN The form of the place of the An unknown transmission destination was specified Restart. If the same symptom occurs after a restart,
transmission isn’t right. for the received message. reinstall.
/MainProcess: It is conceivable that the transmission destination was
SendMessage() not registered in the message information database or
that a wrong transmission destination was selected.
29117 FFIIPMAIN It failed in the message delivery. A message delivery was not successful. Restart. If the same symptom occurs after a restart,
/MainProcess: It is conceivable that the subprocess at the reinstall.
SendMessage() transmission destination was not running.
29119 FFIIPMAIN It failed in the process completion An end notice was not successfully sent to the Restart.
notice. subprocess. It is conceivable that the subprocess was
/MainProcess:ProcessEnd- not running or that the system was unstable.
AnswerMessage()
29122 FFIIPMAIN It failed in the unusual occurrence An error notice was not successfully sent to the Restart.
notice. subprocess. It is conceivable that the subprocess was
/MainProcess: not running or that the system was unstable.
ErrorNoticeMessage()

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-61
Appendix A CL Error Message Table Appx MT A-62
Event Event Source Description Causes Remedies Remarks
29123 FFIIPMAIN It failed in the pipe close. An inter-process communication pipe was not Restart.
/MainProcess: successfully closed. It is conceivable that the system
EndMainProcess() was unstable.
29125 FFIIPMAIN It failed in close of the message The message database was not successfully closed. Restart.
data base. /MainProcess:xxxxx It is conceivable that the system was unstable.
29126 FFIIPMAIN It failed in reading of the registry Data was not successfully acquired from the registry. Reinstall.
information. /MainProcess:xxxxx It is conceivable that installation was not properly
completed.
29127 FFIIPMAIN It failed in writing of the registry Data was not successfully written into the registry. It is Restart.
information. /MainProcess:xxxxx conceivable that the system was unstable.
29128 FFIIPMAIN Trash Folder is not found. %IipApplication%\Trash cannot be found. Restart. If the same error recurs even after restarting The Trash folder could
the system, reinstall it. not be found.
29129 FFIIPMAIN Tempolary file(s) could not delete. Folder file included in %IipApplication%\ Restart. If the same error recurs even after restarting The Trash folder could
Trash cannot be deleted. the system, reinstall it. not be deleted.
29130 FFCustomMsgBox [29130] The system is now starting This dialog box opens for confirmation only. It appears
up. when the system returns from a user utility to an
application.
30001 FFCustomMsgBox [30001] Failed in obtaining the It is conceivable that the file was damaged or deleted. Restart. If the same symptom recurs, perform a
connection characters to the reinstallation.
character database.
30002 FFCustomMsgBox [30002] Failed in connecting to the It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
character database. or deleted. reinstallation.
30003 FFCustomMsgBox [30003] Failed in obtaining the It is conceivable that the file was damaged or deleted. Restart. If the same symptom recurs, perform a
connection characters to the reinstallation.
system setting database.
30004 FFCustomMsgBox [30004] Failed in connecting to the It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
system setting database. or deleted. reinstallation.
30005 FFCustomMsgBox [30005] Failed in obtaining the It is conceivable that the file was damaged or deleted. Restart. If the same symptom recurs, perform a
connection characters to the reinstallation.
image database.
30013 FFCustomMsgBox [30013] Failed in saving listed It is conceivable that the file was damaged or deleted. Restart. If the same symptom recurs, perform a
(worklist) display settings. reinstallation.
30019 FFCustomMsgBox [30019] Failed in obtaining the It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
connection characters to the or deleted. reinstallation.
network setting database.
30027 FFCustomMsgBox [30027] Failed in initializing the list It is conceivable that the registry information was Restart. If the same symptom recurs, perform a
(worklist). damaged or deleted. reinstallation.
obtained.
30045 FFCustomMsgBox [30045] IP address on the Image It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
Reader not obtained. or improperly set. reinstallation.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-62
Appendix A CL Error Message Table Appx MT A-63
Event Event Source Description Causes Remedies Remarks
30057 FFCustomMsgBox [30057] Failed in receiving the The system was unstable. Restart. If the same symptom recurs, perform a
message. reinstallation.
30085 FFCustomMsgBox [30085] Failed in obtaining the It is conceivable that the file was damaged or deleted. Restart. If the same symptom recurs, perform a
connection characters to the reinstallation.
Image Reader status information
database.
30105 FFCustomMsgBox [30105] Failed in list initialization The system was unstable. Restart. If the same symptom recurs, perform a
(waiting for study). reinstallation.
30106 FFCustomMsgBox [30106] Failed in list initialization The system was unstable. Restart. If the same symptom recurs, perform a
(waiting for QA). reinstallation.
30107 FFCustomMsgBox [30107] Failed in list initialization The system was unstable. Restart. If the same symptom recurs, perform a
(waiting for output). reinstallation.
30108 FFCustomMsgBox [30108] Failed in list initialization The system was unstable. Restart. If the same symptom recurs, perform a
(already output). reinstallation.
30109 FFCustomMsgBox [30109] Failed in list initialization The system was unstable. Restart. If the same symptom recurs, perform a
(all). reinstallation.
30110 FFCustomMsgBox [30110] Failed in list initialization The system was unstable. Restart. If the same symptom recurs, perform a
(today). reinstallation.
30117 FFCustomMsgBox [30117] Failed in list refreshment The system was unstable. Restart. If the same symptom recurs, perform a
(worklist). reinstallation.
30121 FFCustomMsgBox [30121] Failed in obtaining It is conceivable that the file was damaged or deleted. Restart. If the same symptom recurs, perform a
the connection characters to reinstallation.
the Image Reader information
database.
30122 FFCustomMsgBox [30122] Failed in accessing It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
the Image Reader information or deleted. reinstallation.
database.
30125 FFCustomMsgBox [30125] Failed in obtaining the It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
system setting information (IP size or deleted. reinstallation.
series).
30129 FFCustomMsgBox [30129] Failed in obtaining It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
the system setting information or deleted. reinstallation.
(Pantomography processing).
30147 FFCustomMsgBox [30147] Failed in obtaining It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
the system setting information or deleted. reinstallation.
(Magnetic card type).
30148 FFCustomMsgBox [30148] Failed in obtaining It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
the system setting information or deleted. reinstallation.
(Magnetic card type).

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-63
Appendix A CL Error Message Table Appx MT A-64
Event Event Source Description Causes Remedies Remarks
30149 FFCustomMsgBox [30149] Failed in obtaining It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
the system setting information or deleted. reinstallation.
(Hospital card used).
30150 FFCustomMsgBox [30150] Failed in accessing the It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
system setting database. or deleted. reinstallation.
30151 FFCustomMsgBox [30151] Failed in initialization - The connection to the network was not established. - Connect to the network.
processing. - Node setup was not completed for “THIS HOST (IIP)” - Set a dummy node for “THIS HOST (IIP)”
under “Network Config”. (e.g., DICOM Print).
- The system was unstable. - Restart. If the same symptom recurs, perform a
reinstallation.
30152 FFCustomMsgBox [30152] Failed in obtaining the It is conceivable that the file was damaged or deleted. Restart. If the same symptom recurs, perform a
pass information (image data reinstallation.
folder).
30153 FFCustomMsgBox [30153] The shutdown process The system was unstable. Restart. If the same symptom recurs, perform a
resulted in a failure. reinstallation.
30155 FFCustomMsgBox [30155] Failed in list initialization It is conceivable that the file was damaged or deleted. Restart. If the same symptom recurs, perform a
(waiting for study). reinstallation.
30157 FFCustomMsgBox [30157] Database access was The problem is attributable, for instance, to an inactive Check whether the SQL service manager is normally
unsuccessful. SQL service manager or uninitialized image database. operating. If the symptom occurs while the SQL
service manager is normally operating, initialize
the image database (the entire image data is then
deleted).
30200 FFCustomMsgBox [30200] Failed in RIS activation. There may be a problem with the RIS module or RIS Verify the settings and then restart.
setup. If the same symptom recurs, perform a reinstallation.
30201 FFCustomMsgBox [30201] A communication error There may be a problem with the RIS module or RIS Verify the settings and then restart.
with RIS occurred. setup. If the same symptom recurs, perform a reinstallation.
30202 FFCustomMsgBox [30202] A communication error There may be a problem with the RIS module or RIS Verify the settings and then restart.
with RIS occurred. setup. If the same symptom recurs, perform a reinstallation.
30204 FFCustomMsgBox [30204] Because of improperly Failed in installation. Reinstall.
performed installation processing,
the system cannot be started.
30205 FFCustomMsgBox [30205] Failed in search The system was unstable. Restart. If the same symptom recurs, perform a
processing. reinstallation.
30206 FFCustomMsgBox [30206] Failed in initializing The system was unstable. Restart. If the same symptom recurs, perform a
patient-incidental information. reinstallation.
30213 FFCustomMsgBox [30213] Failed in displaying the The system was unstable. Restart. If the same symptom recurs, perform a ID input section
preview screen. reinstallation.
30507 FFCustomMsgBox [30201] A communication error Linkage application was not operative. Restart. If the same error recurs , contact our
with Ascent View occurred. maintenance personnel.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-64
Appendix A CL Error Message Table Appx MT A-65
Event Event Source Description Causes Remedies Remarks
31001 FFCustomMsgBox [31001] Failed in obtaining the It is conceivable that the registry information was Restart. If the same symptom recurs, perform a
registry information damaged or deleted. reinstallation.
(font name).
31002 FFCustomMsgBox [31002] Failed in obtaining the It is conceivable that the registry information was Restart. If the same symptom recurs, perform a
registry information damaged or deleted. reinstallation.
(font size).
31003 FFCustomMsgBox [31003] Failed in obtaining the It is conceivable that the registry information was Restart. If the same symptom recurs, perform a
registry information (multi-byte damaged or deleted. reinstallation.
language information).
31004 FFCustomMsgBox [31004] Failed in obtaining the It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
used language in system setting. or deleted. reinstallation.
31005 FFCustomMsgBox [31005] Failed in obtaining the It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
connection characters to the or deleted. reinstallation.
character database.
31006 FFCustomMsgBox [31006] Failed in connecting to the It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
character database. or deleted. reinstallation.
31007 FFCustomMsgBox [31007] Failed in obtaining the It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
connection characters to the or deleted. reinstallation.
system setting database.
31008 FFCustomMsgBox [31008] Failed in connecting to the It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
system setting database. or deleted. reinstallation.
31010 FFCustomMsgBox [31010] Failed in connecting to the The problem is attributable, for instance, to an inactive Check whether the SQL service manager is normally
image database. SQL service manager or uninitialized image database. operating. If the symptom occurs while the SQL
service manager is normally operating, initialize
the image database (the entire image data is then
deleted).
31011 FFCustomMsgBox [31011] Failed in acquiring - The problem is attributable, for instance, to an - Check whether the SQL service manager is normally
information from the image inactive SQL service manager or uninitialized image operating. If the symptom occurs while the SQL
database. database. service manager is normally operating, initialize
- Software version A07 or earlier was used. the image database (the entire image data is then
deleted).
- Upgrade the software to version A08 or later.
31012 FFCustomMsgBox [31012] Failed in accessing the The problem is attributable, for instance, to an inactive Check whether the SQL service manager is normally
image database. SQL service manager or uninitialized image database. operating. If the symptom occurs while the SQL
service manager is normally operating, initialize
the image database (the entire image data is then
deleted).
31013 FFCustomMsgBox [31013] Failed in obtaining the The problem is attributable, for instance, to an inactive Check whether the SQL service manager is normally
information from the image SQL service manager or uninitialized image database. operating. If the symptom occurs while the SQL
database. service manager is normally operating, initialize
the image database (the entire image data is then
deleted).

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-65
Appendix A CL Error Message Table Appx MT A-66
Event Event Source Description Causes Remedies Remarks
31014 FFCustomMsgBox [31014] Failed in setting The problem is attributable, for instance, to an inactive Check whether the SQL service manager is normally
information to the image database. SQL service manager or uninitialized image database. operating. If the symptom occurs while the SQL
service manager is normally operating, initialize
the image database (the entire image data is then
deleted).
31015 FFCustomMsgBox [31015] Failed in deleting the The problem is attributable, for instance, to an inactive Check whether the SQL service manager is normally
information from the image SQL service manager or uninitialized image database. operating. If the symptom occurs while the SQL
database. service manager is normally operating, initialize
the image database (the entire image data is then
deleted).
31016 FFCustomMsgBox [31016] Failed in connecting to the The problem is attributable, for instance, to an inactive Check whether the SQL service manager is normally
flag database. SQL service manager or uninitialized image database. operating. If the symptom occurs while the SQL
service manager is normally operating, initialize
the image database (the entire image data is then
deleted).
31017 FFCustomMsgBox [31017] Failed in accessing the The problem is attributable, for instance, to an inactive Check whether the SQL service manager is normally
flag database. SQL service manager or uninitialized image database. operating. If the symptom occurs while the SQL
service manager is normally operating, initialize
the image database (the entire image data is then
deleted).
31018 FFCustomMsgBox [31018] Failed in setting The problem is attributable, for instance, to an inactive Check whether the SQL service manager is normally
information to the flag database. SQL service manager or uninitialized image database. operating. If the symptom occurs while the SQL
service manager is normally operating, initialize
the image database (the entire image data is then
deleted).
31019 FFCustomMsgBox [31019] Failed in initialization It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
process for menu setting or deleted. reinstallation.
database.
31020 FFCustomMsgBox [31020] Failed in obtaining the It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
menu information from the menu or deleted. reinstallation.
setting database.
31021 FFCustomMsgBox [31021] Failed in obtaining the It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
menu parameter information from or deleted. reinstallation.
the menu setting database.
31022 FFCustomMsgBox [31022] Failed in terminating the It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
menu setting database. or deleted. reinstallation.
31023 FFCustomMsgBox [31023] Failed in obtaining the It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
connection characters to the or deleted. reinstallation.
network setting database.
31024 FFCustomMsgBox [31024] Failed in connecting to the It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
network setting database. or deleted. reinstallation.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-66
Appendix A CL Error Message Table Appx MT A-67
Event Event Source Description Causes Remedies Remarks
31025 FFCustomMsgBox [31025] Failed in obtaining the It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
information from the network or deleted. reinstallation.
setting database.
31026 FFCustomMsgBox [31026] Failed in issuing the The system was unstable. Restart. If the same symptom recurs, perform a
image information. reinstallation.
31027 FFCustomMsgBox [31027] Failed in obtaining the The system was unstable. Restart. If the same symptom recurs, perform a
image information. reinstallation.
Use the DICOM MWM C-FIND Tag Setting of CL
Service Utility to see if Distribution Code (ID:141) is
checked or not.
If checked, uncheck it.
31028 FFCustomMsgBox [31028] Failed in setting the image The system was unstable. Restart. If the same symptom recurs, perform a
information. reinstallation.
31029 FFCustomMsgBox [31029] Failed in deleting the The system was unstable. Restart. If the same symptom recurs, perform a
image information. reinstallation.
31030 FFCustomMsgBox [31030] Failed in reading the An image-related file was not successfully accessed. Restart. If the same symptom frequently occurs,
image information file. The problem is attributable to a disk. replace the disk.
31031 FFCustomMsgBox [31031] Failed in writing the image An image-related file was not successfully accessed. Restart. If the same symptom frequently occurs,
information file. The problem is attributable to a disk. replace the disk.
31032 FFCustomMsgBox [31032] Failed in releasing the The system was unstable. Restart. If the same symptom recurs, perform a
image information. reinstallation.
31033 FFCustomMsgBox [31033] Failed in obtaining the It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
caption information (ID#). or deleted. reinstallation.
31034 FFCustomMsgBox [31034] Failed in obtaining the It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
caption information (study#). or deleted. reinstallation.
31035 FFCustomMsgBox [31035] Failed in obtaining the It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
caption information (patient or deleted. reinstallation.
name).
31036 FFCustomMsgBox [31036] Failed in obtaining the It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
caption information (Kanji-patient or deleted. reinstallation.
name).
31037 FFCustomMsgBox [31037] Failed in obtaining the It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
caption information (sex). or deleted. reinstallation.
31038 FFCustomMsgBox [31038] Failed in obtaining the It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
caption information (sex: M). or deleted. reinstallation.
31039 FFCustomMsgBox [31039] Failed in obtaining the It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
caption information (sex: F). or deleted. reinstallation.
31040 FFCustomMsgBox [31040] Failed in obtaining the It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
caption information (sex: O). or deleted. reinstallation.
31041 FFCustomMsgBox [31041] Failed in obtaining the It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
caption information (data of birth). or deleted. reinstallation.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-67
Appendix A CL Error Message Table Appx MT A-68
Event Event Source Description Causes Remedies Remarks
31042 FFCustomMsgBox [31042] Failed in obtaining the It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
system setting information (ID# or deleted. reinstallation.
input character limitation).
31043 FFCustomMsgBox [31043] Failed in obtaining the It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
system setting information (Study or deleted. reinstallation.
# input character limitation).
31044 FFCustomMsgBox [31044] Failed in obtaining the It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
system setting information (ID # or deleted. reinstallation.
pudding format).
31045 FFCustomMsgBox [31045] Failed in obtaining the It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
system setting information (Study or deleted. reinstallation.
# pudding format).
31047 FFCustomMsgBox [31047] Failed in obtaining the It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
system setting information (date of or deleted. reinstallation.
birth format).
31051 FFCustomMsgBox [31051] Invalid character is input A 2-byte character, @, or other unacceptable Make a proper entry.
in ID #. character was contained.
31052 FFCustomMsgBox [31052] Invalid character is input A 2-byte character, @, or other unacceptable Make a proper entry.
in Study #. character was contained.
31053 FFCustomMsgBox [31053] Invalid character is input A 2-byte character, @, or other unacceptable Make a proper entry.
in patient name. character was contained.
31054 FFCustomMsgBox [31054] Invalid character is input A 1-byte character or other unacceptable character Make a proper entry.
in kanji-patient name. was contained.
31055 FFCustomMsgBox [31055] Invalid character is input A character other than “M”, “F”, and “O” was Make a proper entry.
in sex. contained.
31056 FFCustomMsgBox [31056] Invalid format for date of The entry did not agree with a preselected birth date Make a proper entry.
birth is input. format.
31057 FFCustomMsgBox [31057] Failed in accessing the It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
requesting department database. or deleted. reinstallation.
31058 FFCustomMsgBox [31058] Failed in obtaining the It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
caption information (requesting or deleted. reinstallation.
dep.).
31059 FFCustomMsgBox [31059] Failed in obtaining the It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
item information for displaying in or deleted. reinstallation.
the requesting dep. Selection list.
31060 FFCustomMsgBox [31060] Failed in obtaining It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
the requesting department or deleted. reinstallation.
information.
31061 FFCustomMsgBox [31061] Failed in obtaining the It is conceivable that the file was damaged or deleted. Restart. If the same symptom recurs, perform a
connection characters to the reinstallation.
requesting department database.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-68
Appendix A CL Error Message Table Appx MT A-69
Event Event Source Description Causes Remedies Remarks
31062 FFCustomMsgBox [31062] Failed in accessing the It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
technician information database. or deleted. reinstallation.
31063 FFCustomMsgBox [31063] Failed in caption It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
information (technician). or deleted. reinstallation.
31064 FFCustomMsgBox [31064] Failed in obtaining the It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
item information for displaying in or deleted. reinstallation.
the technician selection list.
31065 FFCustomMsgBox [31065] Failed in obtaining the It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
technician information. or deleted. reinstallation.
31066 FFCustomMsgBox [31066] Failed in obtaining the It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
connection characters to the or deleted. reinstallation.
technician database.
31067 FFCustomMsgBox [31067] Failed in obtaining the It is conceivable that the registry information was Restart. If the same symptom recurs, perform a
registry information (window size). damaged or deleted. reinstallation.
31068 FFCustomMsgBox [31068] No patient information is Nothing was entered in the patient information input Enter at least the patient’s sex.
input. field.
31069 FFCustomMsgBox [31069] Failed in obtaining It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
the system setting information or deleted. reinstallation.
(succeeded from exposure menu
reservation list).
31070 FFCustomMsgBox [31070] Multiple studies cannot be An attempt was made to start an examination process Start an examination process with one examination
executed. with more than one examination item selected from item selected.
an examination waiting list.
31071 FFCustomMsgBox [31071] No list is selected. An attempt was made to start execution with no Select at least one examination item.
examination item selected.
31072 FFCustomMsgBox [31072] Invalid character is input An unacceptable character was contained. Make a proper entry.
for film annotation.
31074 FFCustomMsgBox [31074] Failed in obtaining the The problem is attributable, for instance, to an inactive Check whether the SQL service manager is normally
information from the flag database. SQL service manager or uninitialized image database. operating. If the symptom occurs while the SQL
service manager is normally operating, initialize
the image database (the entire image data is then
deleted).
31076 FFCustomMsgBox [31076] Failed in obtaining the It is conceivable that the bitmap file was damaged or Restart. If the same symptom recurs, perform a
button image (Clear button). deleted. reinstallation.
31077 FFCustomMsgBox [31077] Failed in obtaining the It is conceivable that the bitmap file was damaged or Restart. If the same symptom recurs, perform a
button image (OK button). deleted. reinstallation.
31078 FFCustomMsgBox [31078] Failed in obtaining the It is conceivable that the bitmap file was damaged or Restart. If the same symptom recurs, perform a
button image (Cancel button). deleted. reinstallation.
31079 FFCustomMsgBox [31079] Failed in obtaining the It is conceivable that the bitmap file was damaged or Restart. If the same symptom recurs, perform a
button image (increment button). deleted. reinstallation.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-69
Appendix A CL Error Message Table Appx MT A-70
Event Event Source Description Causes Remedies Remarks
31080 FFCustomMsgBox [31080] Failed in obtaining the It is conceivable that the bitmap file was damaged or Restart. If the same symptom recurs, perform a
button image (decrement button). deleted. reinstallation.
31081 FFCustomMsgBox [31081] Failed in obtaining the It is conceivable that the bitmap file was damaged or Restart. If the same symptom recurs, perform a
button image (Next page button). deleted. reinstallation.
31082 FFCustomMsgBox [31082] Failed in obtaining the It is conceivable that the bitmap file was damaged or Restart. If the same symptom recurs, perform a
button image (previous page deleted. reinstallation.
button).
31097 FFCustomMsgBox [31097] Failed in obtaining the It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
information from the character or deleted. reinstallation.
database.
31099 FFCustomMsgBox [31099] An error of unknown It is highly probable that the program was faulty.
cause occurred.
31100 FFCustomMsgBox [31100] The image display process It is conceivable that the image data or image Restart. If the same symptom recurs, perform a
resulted in a failure while operating information file was damaged. reinstallation.
in the image input subsystem.
31101 FFCustomMsgBox [31101] Failed in obtaining the It is conceivable that the file was damaged or deleted. Restart. If the same symptom recurs, perform a
pass information (log saving reinstallation.
folder).
31103 FFCustomMsgBox [31103] Failed in calling up the The system was unstable. Restart. If the same symptom recurs, perform a
patient information. reinstallation.
31105 FFCustomMsgBox [31105] Failed in terminating the The system was unstable. Restart. If the same symptom recurs, perform a
image input subsystem. reinstallation.
31106 FFCustomMsgBox [31106] Failed in terminating the The system was unstable. Restart. If the same symptom recurs, perform a
image input subsystem. reinstallation.
31107 FFCustomMsgBox [31107] Failed in image inputting The system was unstable. Restart. If the same symptom recurs, perform a
process in the image input sub- reinstallation.
system.
31108 FFCustomMsgBox [31108] Failed in image inputting The system was unstable. Restart. If the same symptom recurs, perform a
process in the image input sub- reinstallation.
system.
31109 FFCustomMsgBox [31109] Failed in image inputting The system was unstable. Restart. If the same symptom recurs, perform a
process in the image input sub- reinstallation.
system.
31110 FFCustomMsgBox [31110] Failed in calling up the The system was unstable. Restart. If the same symptom recurs, perform a
exposure menu. reinstallation.
31111 FFCustomMsgBox [31111] Failed in study terminating The system was unstable. Restart. If the same symptom recurs, perform a
process. reinstallation.
31112 FFCustomMsgBox [31112] Failed in image inputting The system was unstable. Restart. If the same symptom recurs, perform a
process. reinstallation.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-70
Appendix A CL Error Message Table Appx MT A-71
Event Event Source Description Causes Remedies Remarks
31113 FFCustomMsgBox [31113] Failed in image inputting - Software version A07 or earlier was used. - Upgrade the software to version A08 or later.
process. - The system was unstable. - Restart. If the same symptom recurs, perform a
reinstallation.
31114 FFCustomMsgBox [31114] Failed in specifying the The system was unstable. Restart. If the same symptom recurs, perform a
urgent processing. reinstallation.
31116 FFCustomMsgBox [31116] Communication line for It is highly probable that the RU or line was faulty. Check the RU and line.
monitoring the connection status
with the Image Reader(%s) has
broken.
31117 FFCustomMsgBox [31117] No connection monitoring It is highly probable that the RU or line was faulty. Check the RU and line.
response from the Image
Reader(%s).
31118 FFCustomMsgBox [31118] Control line with the Image It is highly probable that the RU or line was faulty. Check the RU and line.
Reader(%s) has broken.
31119 FFCustomMsgBox [31119] No command response It is highly probable that the RU or line was faulty. Check the RU and line.
from the Image Reader(%s).
31120 FFCustomMsgBox [31120] Failed in Image Reader It is highly probable that the RU or line was faulty. Check the RU and line.
status control.
31121 FFCustomMsgBox [31121] Command requested to It is highly probable that the RU or line was faulty. Check the RU and line.
the Image Reader has not been
executed.
31122 FFCustomMsgBox [31122] Failed in obtaining the It is highly probable that the RU or line was faulty. Check the RU and line.
information (status) from the
Image Reader.
31123 FFCustomMsgBox [31123] Failed in obtaining the It is highly probable that the RU or line was faulty. Check the RU and line.
information (machine code) from
the Image Reader.
31124 FFCustomMsgBox [31124] Failed in obtaining the It is highly probable that the RU or line was faulty. Check the RU and line.
information (FRUP version) from
the Image Reader.
31125 FFCustomMsgBox [31125] Failed in re-connecting It is highly probable that the RU or line was faulty. Check the RU and line.
with the Image Reader.
31126 FFCustomMsgBox [31126] Failed in breaking It is highly probable that the RU or line was faulty. Check the RU and line.
connection with the Image Reader.
31127 FFCustomMsgBox [31127] Failed in obtaining the It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
caption information (Study with QA or deleted. reinstallation.
completed).
31128 FFCustomMsgBox [31128] Failed in obtaining the It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
caption (only exposure competed). or deleted. reinstallation.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-71
Appendix A CL Error Message Table Appx MT A-72
Event Event Source Description Causes Remedies Remarks
31129 FFCustomMsgBox [31129] Failed in obtaining It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
the caption information (Study or deleted. reinstallation.
interrupt button).
31130 FFCustomMsgBox [31130] Failed in obtaining the It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
caption information (Cancel or deleted. reinstallation.
button).
31131 FFCustomMsgBox [31131] Failed in obtaining It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
the caption information (Study or deleted. reinstallation.
reception tab).
31132 FFCustomMsgBox [31132] Failed in obtaining the It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
caption information (waiting for or deleted. reinstallation.
study tab).
31133 FFCustomMsgBox [31133] Failed in obtaining the It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
caption information (waiting for QA or deleted. reinstallation.
tab).
31134 FFCustomMsgBox [31134] Failed in obtaining the It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
caption information (Waiting for or deleted. reinstallation.
output tab).
31135 FFCustomMsgBox [31135] Failed in obtaining the It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
caption information (Already or deleted. reinstallation.
output tab).
31136 FFCustomMsgBox [31136] Failed in obtaining the It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
caption information or deleted. reinstallation.
(All tab).
31137 FFCustomMsgBox [31137] Failed in obtaining the It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
caption information (Today tab). or deleted. reinstallation.
31138 FFCustomMsgBox [31138] Failed in obtaining the It is conceivable that the bitmap file was damaged or Restart. If the same symptom recurs, perform a
button image (System button). deleted. reinstallation.
31139 FFCustomMsgBox [31139] Failed in obtaining It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
the caption information (Study or deleted. reinstallation.
reservation button).
31140 FFCustomMsgBox [31140] Failed in obtaining the It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
caption information (Study start or deleted. reinstallation.
button).
31141 FFCustomMsgBox [31141] Patient information is An unacceptable character was contained. Make a proper entry.
illegal.
31142 FFCustomMsgBox [31142] Failed in obtaining the It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
display group data. or deleted. reinstallation.
31143 FFCustomMsgBox [31143] Failed in obtaining the It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
display group data. or deleted. reinstallation.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-72
Appendix A CL Error Message Table Appx MT A-73
Event Event Source Description Causes Remedies Remarks
31144 FFCustomMsgBox [31144] Failed in obtaining the It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
display group data. or deleted. reinstallation.
31145 FFCustomMsgBox [31145] Failed in obtaining the It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
display group data. or deleted. reinstallation.
31146 FFCustomMsgBox [31146] Failed in obtaining the It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
display group data. or deleted. reinstallation.
31147 FFCustomMsgBox [31147] Failed in obtaining the It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
display group data. or deleted. reinstallation.
31148 FFCustomMsgBox [31148] Failed in obtaining the It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
display group data. or deleted. reinstallation.
31149 FFCustomMsgBox [31149] Failed in obtaining the It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
display group data. or deleted. reinstallation.
31152 FFCustomMsgBox [31152] Failed in obtaining the The system was unstable. Restart. If the same symptom recurs, perform a
exposure menu information. reinstallation.
31153 FFCustomMsgBox [31153] Failed in obtaining the It is conceivable that the bitmap file was damaged or Restart. If the same symptom recurs, perform a
button image (Urgent button). deleted. reinstallation.
31154 FFCustomMsgBox [31154] Failed in obtaining the It is conceivable that the bitmap file was damaged or Restart. If the same symptom recurs, perform a
button image (Study completed deleted. reinstallation.
button).
31155 FFCustomMsgBox [31155] Failed in obtaining the It is conceivable that the bitmap file was damaged or Restart. If the same symptom recurs, perform a
button image (Update button). deleted. reinstallation.
31158 FFCustomMsgBox [31158] Failed in obtaining the It is conceivable that the bitmap file was damaged or Restart. If the same symptom recurs, perform a
button image (New button). deleted. reinstallation.
31159 FFCustomMsgBox [31159] Failed in obtaining the It is conceivable that the bitmap file was damaged or Restart. If the same symptom recurs, perform a
button image (Repeat button). deleted. reinstallation.
31160 FFCustomMsgBox [31160] Failed in obtaining the It is conceivable that the bitmap file was damaged or Restart. If the same symptom recurs, perform a
button image (Re-shoot button). deleted. reinstallation.
31161 FFCustomMsgBox [31161] Failed in obtaining the It is conceivable that the bitmap file was damaged or Restart. If the same symptom recurs, perform a
button image (Add button). deleted. reinstallation.
31162 FFCustomMsgBox [31162] Failed in obtaining the It is conceivable that the bitmap file was damaged or Restart. If the same symptom recurs, perform a
button image (Delete button). deleted. reinstallation.
31163 FFCustomMsgBox [31163] Failed in obtaining the It is conceivable that the bitmap file was damaged or Restart. If the same symptom recurs, perform a
button image (Before scroll deleted. reinstallation.
button).
31164 FFCustomMsgBox [31164] Failed in obtaining the It is conceivable that the bitmap file was damaged or Restart. If the same symptom recurs, perform a
button image (After Scroll button). deleted. reinstallation.
31165 FFCustomMsgBox [31165] Failed in obtaining the It is conceivable that the bitmap file was damaged or Restart. If the same symptom recurs, perform a
button image (Monitor mode deleted. reinstallation.
button).

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-73
Appendix A CL Error Message Table Appx MT A-74
Event Event Source Description Causes Remedies Remarks
31166 FFCustomMsgBox [31166] Failed in obtaining the It is conceivable that the bitmap file was damaged or Restart. If the same symptom recurs, perform a
button image (QA button). deleted. reinstallation.
31167 FFCustomMsgBox [31167] Failed in obtaining the It is conceivable that the bitmap file was damaged or Restart. If the same symptom recurs, perform a
button image (Change button). deleted. reinstallation.
31168 FFCustomMsgBox [31168] Failed in obtaining the It is conceivable that the bitmap file was damaged or Restart. If the same symptom recurs, perform a
button image (Rotation/Inversion deleted. reinstallation.
button).
31169 FFCustomMsgBox [31169] Failed in obtaining the It is conceivable that the bitmap file was damaged or Restart. If the same symptom recurs, perform a
button image (EDR mode button). deleted. reinstallation.
31170 FFCustomMsgBox [31170] Failed in obtaining the It is conceivable that the bitmap file was damaged or Restart. If the same symptom recurs, perform a
button image (Image format deleted. reinstallation.
button).
31171 FFCustomMsgBox [31171] Failed in obtaining the It is conceivable that the bitmap file was damaged or Restart. If the same symptom recurs, perform a
button image (Change menu deleted. reinstallation.
parameter button).
31172 FFCustomMsgBox [31172] Failed in obtaining the tool It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
tip (New button). or deleted. reinstallation.
31173 FFCustomMsgBox [31173] Failed in obtaining the tool It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
tip (Repeat button). or deleted. reinstallation.
31174 FFCustomMsgBox [31174] Failed in obtaining the tool It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
tip (Re-shoot button). or deleted. reinstallation.
31175 FFCustomMsgBox [31175] Failed in obtaining the tool It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
tip (Add button). or deleted. reinstallation.
31176 FFCustomMsgBox [31176] Failed in obtaining the tool It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
tip (Delete button). or deleted. reinstallation.
31177 FFCustomMsgBox [31177] Failed in obtaining the tool It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
tip (Before scroll button). or deleted. reinstallation.
31178 FFCustomMsgBox [31178] Failed in obtaining the tool It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
tip (After scroll button). or deleted. reinstallation.
31179 FFCustomMsgBox [31179] Failed in obtaining the tool It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
tip (Monitor mode button). or deleted. reinstallation.
31180 FFCustomMsgBox [31180] Failed in obtaining the tool It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
tip (QA button ). or deleted. reinstallation.
31181 FFCustomMsgBox [31181] Failed in obtaining the tool It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
tip (Change button). or deleted. reinstallation.
31182 FFCustomMsgBox [31182] Failed in obtaining the tool It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
tip (Rotation/Inversion button). or deleted. reinstallation.
31183 FFCustomMsgBox [31183] Failed in obtaining the tool It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
tip (EDR mode button). or deleted. reinstallation.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-74
Appendix A CL Error Message Table Appx MT A-75
Event Event Source Description Causes Remedies Remarks
31184 FFCustomMsgBox [31184] Failed in obtaining the tool It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
tip (Image format button). or deleted. reinstallation.
31185 FFCustomMsgBox [31185] Failed in obtaining the It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
tool tip (Change menu parameter or deleted. reinstallation.
button).
31186 FFCustomMsgBox [31186] Failed in obtaining the It is conceivable that the registry information was Restart. If the same symptom recurs, perform a
registry information (Set No.). damaged or deleted. reinstallation.
31187 FFCustomMsgBox [31187] Failed in setting the tool It is conceivable that the registry information was Restart. If the same symptom recurs, perform a
tip (Before scroll button). damaged or deleted. reinstallation.
31188 FFCustomMsgBox [31188] Failed in obtaining the It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
system setting information (System or deleted. reinstallation.
ID).
31189 FFCustomMsgBox [31189] Failed in obtaining It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
the system setting information or deleted. reinstallation.
(Auto-distribution instruction
information).
31191 FFCustomMsgBox [31191] Failed in obtaining It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
the system setting information or deleted. reinstallation.
(Selector auto-switchover
information).
31192 FFCustomMsgBox [31192] Failed in obtaining the It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
system setting information (Menu or deleted. reinstallation.
auto-sequence information).
31193 FFCustomMsgBox [31193] Failed in obtaining the It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
system setting information (Set or deleted. reinstallation.
No. minimum value information).
31194 FFCustomMsgBox [31194] Failed in obtaining the It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
system setting information (Set or deleted. reinstallation.
No. maximum value information).
31196 FFCustomMsgBox [31196] Failed in obtaining the It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
system setting information (Series or deleted. reinstallation.
information issuing method).
31197 FFCustomMsgBox [31197] No matching work ID The contents of the image file did not agree with those Initialize the image database.
exists. of the image database.
31198 FFCustomMsgBox [31198] Failed in distribution The system was unstable. Restart. If the same symptom recurs, perform a
process. reinstallation.
31201 FFIIPInImgCtrl Data error. [Detailed error Abnormal data was entered from the RU or the 5000 Check the RU and the 5000 Series equipment.
information 31201 2 items] Series equipment. Perform an image input process again or restart.
31201 FFIIPInImgCtrl Image sizecode error. Illegal image size code when a request was issued for Check the RU and the 5000 Series equipment.
image input. Perform an image input process again or restart.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-75
Appendix A CL Error Message Table Appx MT A-76
Event Event Source Description Causes Remedies Remarks
31201 FFIIPInImgCtrl InImgReadProc method parameter Illegal image input request method parameters. Check the RU and the 5000 Series equipment.
error. Perform an image input process again or restart.
31201 FFInImgMonitorCtrl Data error.%n[%1] Input data was incorrect. Restart the system.
31202 FFCustomMsgBox [31202] Failed in obtaining the It is conceivable that the database file was damaged Check the RU and the 5000 Series equipment.
system setting information (Patient or deleted. Perform an image input process again or restart.
information online serial port No.).
31202 FFIIPInImgCtrl Initialize error. [Detailed error An abnormality occurred in the initialization process. Restart the system. If the same symptom occurs after
information 31202 14 items] The common probable causes are as follows: a restart, perform a reinstallation and initialize the
image database.
• Installation was not normally ended.
• The parameter file was incorrect.
31202 FFIIPInImgCtrl Create Instance error. Failed in creating Control Instance. Restart the system. If the same symptom occurs after
a restart, perform a reinstallation and initialize the
image database.
31202 FFIIPInImgCtrl Directory path get error. Failed in acquiring each directory path name. Restart the system. If the same symptom occurs after
a restart, perform a reinstallation and initialize the
image database.
31202 FFIIPInImgCtrl Thread make error.(Read) Failed in creating image input thread. Restart the system. If the same symptom occurs after
a restart, perform a reinstallation and initialize the
image database.
31202 FFIIPInImgCtrl Thread make error.(Disp) Failed in creating image display thread. Restart the system. If the same symptom occurs after
a restart, perform a reinstallation and initialize the
image database.
31202 FFIIPInImgCtrl EDR parameter file load error. Failed in memory loading of the EDR processing Restart the system. If the same symptom occurs after
parameter file. a restart, perform a reinstallation and initialize the
image database.
31202 FFIIPInImgCtrl Image parameter file load error. Failed in memory loading of the image processing Restart the system. If the same symptom occurs after
parameter file. a restart, perform a reinstallation and initialize the
image database.
31202 FFIIPInImgCtrl GetMessage(THREAD_ Failed in acquiring the image input/display thread Restart the system. If the same symptom occurs after
END) error. startup completion event. a restart, perform a reinstallation and initialize the
image database.
31202 FFIIPInImgCtrl DICOM SCP control run error. Failed in DICOM SCP control startup. Restart the system. If the same symptom occurs after
a restart, perform a reinstallation and initialize the
image database.
31202 FFIIPInImgCtrl GetMessage(DICOM_ Failed in acquiring the DICOM SCP control startup Restart the system. If the same symptom occurs after
RUN_COMPLETE) error. completion event. a restart, perform a reinstallation and initialize the
image database.
31202 FFIIPInImgCtrl PostThreadMessage(IMG_END_ Failed in requesting for terminating image input Restart the system. If the same symptom occurs after
REQ) error. thread. a restart, perform a reinstallation and initialize the
image database.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-76
Appendix A CL Error Message Table Appx MT A-77
Event Event Source Description Causes Remedies Remarks
31202 FFIIPInImgCtrl PostThreadMessage(DISP_END_ Failed in requesting for terminating image display Restart the system. If the same symptom occurs after
REQ) error. thread. a restart, perform a reinstallation and initialize the
image database.
31202 FFIIPInImgCtrl GetMessage(THREAD_ Failed in acquiring the image input/display thread Restart the system. If the same symptom occurs after
COMPLETE) error. termination completion event. a restart, perform a reinstallation and initialize the
image database.
31202 FFIIPInImgCtrl GetMessage(DICOM_END_COM Failed in acquiring the DICOM SCP control Restart the system. If the same symptom occurs after
PLETE) error. termination completion event. a restart, perform a reinstallation and initialize the
image database.
31202 FFIIPInImgCtrl DICOM SCP control (EndPrc Failed in requesting for terminating DICOM SCP Restart the system. If the same symptom occurs after
method) error. control. a restart, perform a reinstallation and initialize the
image database.
31202 FFInImgMonitorCtrl Initialize error.%n[%1] Failed in initialization processing. Restart the system.
31203 FFCustomMsgBox [31203] Failed in obtaining the It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
system setting information (Patient or deleted. reinstallation.
information online device name.).
31203 FFInImgMonitorDispCtrl Method process error.%n An error was detected during method processing. Restart the system.
[%1]
31204 FFInImgMonitorDispCtrl Windows API access error. The system was unstable. Restart the system.
%n[%1]
31205 FFInImgMonitorDispCtrl Parameter error.%n[%1] An abnormal parameter was detected. Restart the system.
31206 FFInImgMonitorDispCtrl Memory access error. %n[%1] System memory was insufficient. Restart the system.
31207 FFInImgMonitorDispCtrl Function error.%n[%1] An error was detected during internal processing. Restart the system.
31207 FFCustomMsgBox [31207] Failed in setting the Image The system was unstable. Restart. If the same symptom recurs, perform a
Reader machine code. reinstallation.
31208 FFCustomMsgBox [31208] Failed in obtaining the It is conceivable that the bitmap file was damaged or Restart. If the same symptom recurs, perform a
button image (New button). deleted. reinstallation.
31208 FFInImgMonitorDispCtrl File access error.%n[%1] The system was unstable. Restart the system.
31210 FFCustomMsgBox [31210] Failed in obtaining the It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
system setting information (Image or deleted. reinstallation.
rotation/inversion selectable
range).
31211 FFCustomMsgBox [31211] Failed in obtaining the It is conceivable that the bitmap file was damaged or Restart. If the same symptom recurs, perform a
button image (frontal image deleted. reinstallation.
button).
31212 FFCustomMsgBox [31212] Failed in obtaining the It is conceivable that the bitmap file was damaged or Restart. If the same symptom recurs, perform a
button image (Left-right invert deleted. reinstallation.
button).
31213 FFCustomMsgBox [31213] Failed in obtaining the It is conceivable that the bitmap file was damaged or Restart. If the same symptom recurs, perform a
button image (Up-side-down invert deleted. reinstallation.
button).

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-77
Appendix A CL Error Message Table Appx MT A-78
Event Event Source Description Causes Remedies Remarks
31214 FFCustomMsgBox [31214] Failed in obtaining the It is conceivable that the bitmap file was damaged or Restart. If the same symptom recurs, perform a
button image (180 degree rotation deleted. reinstallation.
button).
31215 FFCustomMsgBox [31215] Failed in obtaining the It is conceivable that the bitmap file was damaged or Restart. If the same symptom recurs, perform a
button image deleted. reinstallation.
(90 degree rotation button).
31218 FFCustomMsgBox [31218] Failed in obtaining the It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
system setting information (Image or deleted. reinstallation.
format selectable range).
31219 FFCustomMsgBox [31219] Failed in obtaining the It is conceivable that the bitmap file was damaged or Restart. If the same symptom recurs, perform a
button image (SINGLE button). deleted. reinstallation.
31220 FFCustomMsgBox [31220] Failed in obtaining the It is conceivable that the bitmap file was damaged or Restart. If the same symptom recurs, perform a
button image (TWIN button). deleted. reinstallation.
31225 FFCustomMsgBox [31225] Failed in obtaining the It is conceivable that the file was damaged or deleted. Restart. If the same symptom recurs, perform a
connection characters to the film reinstallation.
annotation database.
31226 FFCustomMsgBox [31226] Failed in connecting It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
characters to the film annotation or deleted. reinstallation.
database.
31227 FFCustomMsgBox [31227] Failed in obtaining It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
the information from the film or deleted. reinstallation.
annotation database.
31232 FFCustomMsgBox [31232] Failed in obtaining the It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
system setting information (upper or deleted. reinstallation.
limit of No. of output film).
31235 FFCustomMsgBox [31235] Failed in obtaining the It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
caption information (CS). or deleted. reinstallation.
31236 FFCustomMsgBox [31236] Failed in obtaining the It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
caption information (SS). or deleted. reinstallation.
31241 FFCustomMsgBox [31241] Failed in creating - Software version A06 or earlier was used to enter - Upgrade the software to version A07 or later.
thumbnail images with the image an image from the 5000 plus Series. - Restart. If the same symptom recurs, perform a
input subsystem. - The system was unstable. reinstallation.
31242 FFCustomMsgBox [31242] Failed in processing in The system was unstable. Restart. If the same symptom recurs, perform a
image input subsystem. reinstallation.
31243 FFCustomMsgBox [31243] Image format information A value in the image file conflicted with a system Since a standard setting will be used as a substitute
is illegal. setting. to continue with the process, no particular response is
required.
31244 FFCustomMsgBox [31244] Annotation information is A value in the image file conflicted with a system Since a standard setting will be used as a substitute
illegal. setting. to continue with the process, no particular response is
required.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-78
Appendix A CL Error Message Table Appx MT A-79
Event Event Source Description Causes Remedies Remarks
31245 FFCustomMsgBox [31245] No. of output film A value in the image file conflicted with a system Since a standard setting will be used as a substitute
information is illegal. setting. to continue with the process, no particular response is
required.
31246 FFCustomMsgBox [31246] Distribution code A value in the image file conflicted with a system Since a standard setting will be used as a substitute
information is illegal. setting. to continue with the process, no particular response is
required.
31247 FFCustomMsgBox [31247] Image reading sensitivity A value in the image file conflicted with a system Since a standard setting will be used as a substitute
is illegal. setting. to continue with the process, no particular response is
required.
31248 FFCustomMsgBox [31248] Average output density is A value in the image file conflicted with a system Since a standard setting will be used as a substitute
illegal. setting. to continue with the process, no particular response is
required.
31249 FFCustomMsgBox [31249] EDR mode is illegal. A value in the image file conflicted with a system Since a standard setting will be used as a substitute
setting. to continue with the process, no particular response is
required.
31250 FFCustomMsgBox [31250] Image filing mode is A value in the image file conflicted with a system Since a standard setting will be used as a substitute
illegal. setting. to continue with the process, no particular response is
required.
31251 FFCustomMsgBox [31251] Function mode is illegal. A value in the image file conflicted with a system Since a standard setting will be used as a substitute
setting. to continue with the process, no particular response is
required.
31252 FFCustomMsgBox [31252] IP logical size information A value in the image file conflicted with a system Since a standard setting will be used as a substitute
is illegal. setting. to continue with the process, no particular response is
required.
31253 FFCustomMsgBox [31253] Contrast shift is illegal. A value in the image file conflicted with a system Since a standard setting will be used as a substitute
setting. to continue with the process, no particular response is
required.
31254 FFCustomMsgBox [31254] Sensitivity shift information A value in the image file conflicted with a system Since a standard setting will be used as a substitute
is illegal. setting. to continue with the process, no particular response is
required.
31255 FFCustomMsgBox [31255] There is a discrepancy A value in the image file conflicted with a system Since a standard setting will be used as a substitute
between system setting and image setting. to continue with the process, no particular response is
information. required.
31256 FFCustomMsgBox [31256] There is a discrepancy A value in the image file conflicted with a system Since a standard setting will be used as a substitute
between system setting and image setting. to continue with the process, no particular response is
information. required.
31257 FFCustomMsgBox [31257] There is a discrepancy A value in the image file conflicted with a system Since a standard setting will be used as a substitute
between system setting and image setting. to continue with the process, no particular response is
information. required.
31258 FFCustomMsgBox [31258] There is a discrepancy A value in the image file conflicted with a system Since a standard setting will be used as a substitute
between system setting and image setting. to continue with the process, no particular response is
information. required.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-79
Appendix A CL Error Message Table Appx MT A-80
Event Event Source Description Causes Remedies Remarks
31259 FFCustomMsgBox [31259] Failed in obtaining the It is conceivable that the image information was Delete the associated examination.
image invert/rotate information. damaged. If the same symptom frequently recurs, perform a
reinstallation.
31260 FFCustomMsgBox [31260] Failed in setting the image A value in the image file conflicted with a system Since a standard setting will be used as a substitute
format information. setting. to continue with the process, no particular response is
required.
31261 FFCustomMsgBox [31261]Failed in obtaining the It is conceivable that the image information was Delete the associated examination.
image format information. damaged. If the same symptom frequently recurs, perform a
reinstallation.
31262 FFCustomMsgBox [31262] Film annotation is illegal. The registered film mark contained an unacceptable Correct the film mark setup with a user utility.
character.
31265 FFCustomMsgBox [31265] Failed in obtaining the It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
caption information (FIX). or deleted. reinstallation.
31266 FFCustomMsgBox [31266] Failed in obtaining the It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
caption information or deleted. reinstallation.
(S value).
31267 FFCustomMsgBox [31267] Failed in obtaining the It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
caption information (SEMI-X). or deleted. reinstallation.
31268 FFCustomMsgBox [31268] Failed in obtaining the It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
caption information (Density Ave) or deleted. reinstallation.
31269 FFCustomMsgBox [31269] Failed in obtaining the It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
caption information (Density or deleted. reinstallation.
Average).
31270 FFCustomMsgBox [31270] Input value is illegal. The entered value contained an unacceptable Make a proper entry.
character or was out of range or otherwise abnormal.
31272 FFCustomMsgBox [31272] Failed in obtaining It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
the system setting information or deleted. reinstallation.
(Function selectable range).
31273 FFCustomMsgBox [31273] Failed in setting the The system was unstable. Restart. If the same symptom recurs, perform a
function information. reinstallation.
31274 FFCustomMsgBox [31274] Failed in setting the No. of The system was unstable. Restart. If the same symptom recurs, perform a
output film. reinstallation.
31277 FFCustomMsgBox [31277] Failed in setting the The system was unstable. Restart. If the same symptom recurs, perform a
contrast shift. reinstallation.
31278 FFCustomMsgBox [31278] Failed in setting the The system was unstable. Restart. If the same symptom recurs, perform a
sensitivity shift. reinstallation.
31279 FFCustomMsgBox [31279] Failed in setting the EDR The system was unstable. Restart. If the same symptom recurs, perform a
mode information. reinstallation.
31280 FFCustomMsgBox [31280] Failed in setting the FIX The system was unstable. Restart. If the same symptom recurs, perform a
mode S value. reinstallation.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-80
Appendix A CL Error Message Table Appx MT A-81
Event Event Source Description Causes Remedies Remarks
31281 FFCustomMsgBox [31281] Failed in setting the The system was unstable. Restart. If the same symptom recurs, perform a
SEMI-X mode average output reinstallation.
density.
31282 FFCustomMsgBox [31282] Failed in QA starting The system was unstable. Restart. If the same symptom recurs, perform a
process. reinstallation.
31284 FFCustomMsgBox [31284] Failed in obtaining the It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
system setting information (Filing or deleted. reinstallation.
mode selectable range).
31285 FFCustomMsgBox [31285] Failed in setting the image The system was unstable. Restart. If the same symptom recurs, perform a
filing information. reinstallation.
31288 FFCustomMsgBox [31288] Failed in obtaining The system was unstable. Restart. If the same symptom recurs, perform a
the distribution destination reinstallation.
information.
31290 FFCustomMsgBox [31290] Failed in obtaining IP The system was unstable. Restart. If the same symptom recurs, perform a
logical size information. reinstallation.
31291 FFCustomMsgBox [31291] Failed in obtaining It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
the system setting information or deleted. reinstallation.
(Distribution code change).
31292 FFCustomMsgBox [31292] Failed in obtaining the It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
system setting information (Film or deleted. reinstallation.
annotation change).
31293 FFCustomMsgBox [31293] Failed in obtaining It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
the system setting information or deleted. reinstallation.
(Function change).
31294 FFCustomMsgBox [31294] Failed in terminating The system was unstable. Restart. If the same symptom recurs, perform a
process. reinstallation.
31295 FFCustomMsgBox [31295] Failed in terminating The system was unstable. Restart. If the same symptom recurs, perform a
process. reinstallation.
31296 FFCustomMsgBox [31296] Failed in updating the list The system was unstable. Restart. If the same symptom recurs, perform a
display. reinstallation.
31303 FFCustomMsgBox [31303] No list (Waiting for study) It is highly probable that the program was faulty.
is selected.
31304 FFCustomMsgBox [31304] No list (Waiting for QA) is It is highly probable that the program was faulty.
selected.
31305 FFCustomMsgBox [31305] No list (Waiting for output) It is highly probable that the program was faulty.
is selected.
31306 FFCustomMsgBox [31306] No list (Already output) is It is highly probable that the program was faulty.
selected.
31307 FFCustomMsgBox [31307] No list (All) is selected. It is highly probable that the program was faulty.
31308 FFCustomMsgBox [31308] No list (Today) is selected. It is highly probable that the program was faulty.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-81
Appendix A CL Error Message Table Appx MT A-82
Event Event Source Description Causes Remedies Remarks
31309 FFCustomMsgBox [31309] Failed in updating the list The system was unstable. Restart. If the same symptom recurs, perform a
(Waiting for study) display. reinstallation.
31310 FFCustomMsgBox [31310] Failed in updating the list The system was unstable. Restart. If the same symptom recurs, perform a
(Waiting for QA) display. reinstallation.
31311 FFCustomMsgBox [31311] Failed in updating the list The system was unstable. Restart. If the same symptom recurs, perform a
(Waiting for output) display. reinstallation.
31312 FFCustomMsgBox [31312] Failed in updating the list The system was unstable. Restart. If the same symptom recurs, perform a
(Already output) display. reinstallation.
31313 FFCustomMsgBox [31313] Failed in updating the list The system was unstable. Restart. If the same symptom recurs, perform a
(All) display. reinstallation.
31314 FFCustomMsgBox [31314] Failed in updating the list The system was unstable. Restart. If the same symptom recurs, perform a
(Today) display. reinstallation.
31315 FFCustomMsgBox [31315] No. of selected study is It is highly probable that the program was faulty.
illegal. Study cannot be started.
31316 FFCustomMsgBox [31316] Failed in study starting The system was unstable. Restart. If the same symptom recurs, perform a
process. reinstallation.
31317 FFCustomMsgBox [31317] No. of selected studies is It is highly probable that the program was faulty.
illegal. QA cannot be started.
31318 FFCustomMsgBox [31318] Failed in QA starting The system was unstable. Restart. If the same symptom recurs, perform a
process. reinstallation.
31319 FFCustomMsgBox [31319] Failed in QA starting The system was unstable. Restart. If the same symptom recurs, perform a
process. reinstallation.
31320 FFCustomMsgBox [31320] Failed in obtaining It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
the system setting information or deleted. reinstallation.
(Operational mode after studying).
31321 FFCustomMsgBox [31321] Failed in obtaining the It is conceivable that the bitmap file was damaged or Restart. If the same symptom recurs, perform a
button image (Utility button). deleted. reinstallation.
31322 FFCustomMsgBox [31322] Failed in obtaining the The system was unstable. Restart. If the same symptom recurs, perform a
patient information. reinstallation.
31323 FFCustomMsgBox [31323] Date of birth could not be Illegal birth date information was set. Delete the associated examination. If the same
converted to the displaying format. symptom recurs after deletion, perform a reinstallation.
31324 FFCustomMsgBox [31324] Failed in obtaining the It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
caption information (Stop alarm or deleted. reinstallation.
button).
31329 FFCustomMsgBox [31329] Message from the Image The RU software version conflicted with the message Confirm software version and setups on the RU side.
Reader could not be displayed. file version on the IIP side or the RU message file was
damaged or otherwise abnormal.
31330 FFCustomMsgBox [31330] Failed in the obtaining It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
the caption information (System or deleted. reinstallation.
Terminating button).

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-82
Appendix A CL Error Message Table Appx MT A-83
Event Event Source Description Causes Remedies Remarks
31331 FFCustomMsgBox [31331] Failed in obtaining the It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
caption information (User Utility or deleted. reinstallation.
button).
31332 FFCustomMsgBox [31332] Failed in obtaining the It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
caption information (Study list or deleted. reinstallation.
setting button).
31333 FFCustomMsgBox [31333] Failed in obtaining the It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
caption information (Version or deleted. reinstallation.
displaying button).
31334 FFCustomMsgBox [31334] Failed in obtaining the It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
caption information (Cancel or deleted. reinstallation.
button).
31335 FFCustomMsgBox [31335] Failed in obtaining the It is conceivable that the bitmap file was damaged or Restart. If the same symptom recurs, perform a
button image (Clear button). deleted. reinstallation.
31336 FFCustomMsgBox [31336] Failed in obtaining the tool It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
tip information (Clear button). or deleted. reinstallation.
31337 FFCustomMsgBox [31337] Failed in displaying the The thumbnail image file was damaged, deleted, or There are no processing problems except for the
thumbnail images. otherwise abnormal. inability to display thumbnail images. If the same
symptom frequently occurs, initialize the image
database.
31339 FFCustomMsgBox [31339] Failed in executing the The RU is not ready for performing the method. Check the RU.
dust removing process starting
method of the Image Reader.
31340 FFCustomMsgBox [31340] Failed in obtaining the It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
caption information (Cancel or deleted. reinstallation.
button).
31341 FFCustomMsgBox [31341] Failed in obtaining the It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
caption information (Cancel or deleted. reinstallation.
button).
31343 FFCustomMsgBox [31343] Failed in inputting images. It is conceivable that there was a problem with the RU Check the RU and line.
or line.
31344 FFCustomMsgBox [31344] Image size could not be It is conceivable that there was a problem with the Check the RU.
detected. RU.
31346 FFCustomMsgBox [31346] Failed in obtaining the The RU software version conflicted with the message Check the software version and setup on the RU side.
Image Reader error information. file version on the IIP side or the RU message file was
damaged or otherwise abnormal.
31347 FFCustomMsgBox [31347] Failed in obtaining the The RU software version conflicted with the message Check the software version and setup on the RU side.
Image Reader status information. file version on the IIP side or the RU message file was
damaged or otherwise abnormal.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-83
Appendix A CL Error Message Table Appx MT A-84
Event Event Source Description Causes Remedies Remarks
31348 FFCustomMsgBox [31348] Failed in thumbnail image The thumbnail image file was damaged, deleted, or There are no processing problems except for the
creation process. otherwise abnormal. inability to display thumbnail images. If the same
symptom frequently occurs, initialize the image
database.
31349 FFCustomMsgBox [31349] Failed in displaying the list It is conceivable that the system was unstable or that If the same symptom recurs after a restart, perform a
(Waiting for study). the program was faulty. reinstallation.
31350 FFCustomMsgBox [31350] Failed in displaying the list It is conceivable that the system was unstable or that If the same symptom recurs after a restart, perform a
(Waiting for QA). the program was faulty. reinstallation.
31351 FFCustomMsgBox [31351] Failed in displaying the list It is conceivable that the system was unstable or that If the same symptom recurs after a restart, perform a
(Waiting for output). the program was faulty. reinstallation.
31352 FFCustomMsgBox [31352] Failed in displaying the list It is conceivable that the system was unstable or that If the same symptom recurs after a restart, perform a
(Already output). the program was faulty. reinstallation.
31353 FFCustomMsgBox [31353] Failed in displaying the list It is conceivable that the system was unstable or that If the same symptom recurs after a restart, perform a
(All). the program was faulty. reinstallation.
31354 FFCustomMsgBox [31354] Failed in displaying the list It is conceivable that the system was unstable or that If the same symptom recurs after a restart, perform a
(Today). the program was faulty. reinstallation.
31355 FFCustomMsgBox [31355] Failed in customizing the It is conceivable that the system was unstable or that If the same symptom recurs after a restart, perform a
list display. the program was faulty. reinstallation.
31356 FFCustomMsgBox [31356] Failed in obtaining the It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
system setting information (Default or deleted. reinstallation.
menu code).
31358 FFCustomMsgBox [31358] Failed in obtaining the tool It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
tip text. or deleted. reinstallation.
31359 FFCustomMsgBox [31359] Failed in obtaining the It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
caption information (Title bar). or deleted. reinstallation.
31360 FFCustomMsgBox [31360] Failed in obtaining the It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
caption information (Option label). or deleted. reinstallation.
31361 FFCustomMsgBox [31361] Failed in obtaining the It is conceivable that the file was damaged or deleted. Restart. If the same symptom recurs, perform a
version information. reinstallation.
31362 FFCustomMsgBox [31362] Option list could not be It is conceivable that the registry information was Restart. If the same symptom recurs, perform a
obtained. damaged or deleted. reinstallation.
31363 FFCustomMsgBox [31363] Failed in obtaining the It is conceivable that the registry information was Restart. If the same symptom recurs, perform a
registry information (Next multiple damaged or deleted. reinstallation.
frame set No.).
31364 FFCustomMsgBox [31364] Failed in setting the It is conceivable that the registry information was Restart. If the same symptom recurs, perform a
registry information (Next multi- damaged or deleted. reinstallation.
frame set No.).
31365 FFCustomMsgBox [31365] Failed in obtaining the It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
system setting information (Series or deleted. reinstallation.
issuing type).

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-84
Appendix A CL Error Message Table Appx MT A-85
Event Event Source Description Causes Remedies Remarks
31366 FFCustomMsgBox [31366] Failed in obtaining the The system was unstable. Restart. If the same symptom recurs, perform a
multi-frame UID information. reinstallation.
31367 FFCustomMsgBox [31367] Failed in obtaining the It is conceivable that the bitmap file was damaged or Restart. If the same symptom recurs, perform a
cassette insertion enabled image. deleted. reinstallation.
31368 FFCustomMsgBox [31368] Failed in obtaining the It is conceivable that the bitmap file was damaged or Restart. If the same symptom recurs, perform a
cassette insertion disabled image. deleted. reinstallation.
31369 FFCustomMsgBox [31369] Failed in obtaining the It is conceivable that the bitmap file was damaged or Restart. If the same symptom recurs, perform a
image icon (Mis-exposure). deleted. reinstallation.
31370 FFCustomMsgBox [31370] Failed in obtaining the It is conceivable that the bitmap file was damaged or Restart. If the same symptom recurs, perform a
button image (Image style button). deleted. reinstallation.
31371 FFCustomMsgBox [31371] Failed in obtaining the It is conceivable that the bitmap file was damaged or Restart. If the same symptom recurs, perform a
button image (EDR button). deleted. reinstallation.
31372 FFCustomMsgBox [31372] Failed in obtaining the It is conceivable that the bitmap file was damaged or Restart. If the same symptom recurs, perform a
button image (Function button). deleted. reinstallation.
31373 FFCustomMsgBox [31373] Failed in obtaining the It is conceivable that the bitmap file was damaged or Restart. If the same symptom recurs, perform a
button image (No. of output film deleted. reinstallation.
button).
31374 FFCustomMsgBox [31374] Failed in obtaining the It is conceivable that the bitmap file was damaged or Restart. If the same symptom recurs, perform a
button image (IP size button). deleted. reinstallation.
31375 FFCustomMsgBox [31375] Failed in obtaining the It is conceivable that the bitmap file was damaged or Restart. If the same symptom recurs, perform a
button image (Film format button). deleted. reinstallation.
31376 FFCustomMsgBox [31376] Failed in obtaining the It is conceivable that the bitmap file was damaged or Restart. If the same symptom recurs, perform a
button image (Filing button). deleted. reinstallation.
31377 FFCustomMsgBox [31377] Failed in obtaining the It is conceivable that the bitmap file was damaged or Restart. If the same symptom recurs, perform a
button image (Film annotation deleted. reinstallation.
button).
31378 FFCustomMsgBox [31378] Failed in obtaining the It is conceivable that the bitmap file was damaged or Restart. If the same symptom recurs, perform a
button image (Distribution code deleted. reinstallation.
button).
31379 FFCustomMsgBox [31379] Failed in obtaining the It is conceivable that the bitmap file was damaged or Restart. If the same symptom recurs, perform a
button image (CS/SS button). deleted. reinstallation.
31380 FFCustomMsgBox [31380] Failed in obtaining the It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
system setting information (Serial or deleted. reinstallation.
port No. for connecting to XCON).
31381 FFCustomMsgBox [31381] Failed in obtaining the It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
XCON device name. or deleted. reinstallation.
31382 FFCustomMsgBox [31382] Image data line to the The line was abnormal. Check the line.
Image Reader(%s) has broken.
31386 FFCustomMsgBox [31386] Failed in obtaining the It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
caption information. or deleted. reinstallation.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-85
Appendix A CL Error Message Table Appx MT A-86
Event Event Source Description Causes Remedies Remarks
31387 FFCustomMsgBox [31387] Failed in reading the bit- It is conceivable that the bitmap file was damaged or Restart. If the same symptom recurs, perform a
map file. deleted. reinstallation.
31388 FFCustomMsgBox [31388] Failed in obtaining the font It is conceivable that the registry information was Restart. If the same symptom recurs, perform a
information. damaged or deleted. reinstallation.
31390 FFCustomMsgBox [31390] The information about a The entered information or its format was in error.
requesting department was illegal.
31391 FFCustomMsgBox [31391] The information about a The entered information or its format was in error.
paramedic was illegal.
31392 FFCustomMsgBox [31392] A patient information Nothing matched the entered patient information. Check the patient information.
search was unsuccessful.
31393 FFCustomMsgBox [31393] Failed in setting up This error is attributable to an RIS problem or RIS Check RIS-side status or RIS setup.
connection status with the RIS. setup problem.
31394 FFCustomMsgBox [31394] The line connected to the This error is attributable to an RIS problem or RIS Check the RIS status and RIS setup.
RIS was faulty. setup problem.
31400 FFCustomMsgBox [31400]The selected menu did not This error is attributable to an RIS problem or RIS Check the RIS status and RIS setup.
exist. setup problem.
31401 FFCustomMsgBox [31401] Path information (image It is conceivable that the file was damaged or deleted. Restart. If the same symptom recurs, perform a
data folder) acquisition was not reinstallation.
successful.
31402 FFCustomMsgBox [31402] Parameter icon image It is conceivable that the bitmap file was damaged or Restart. If the same symptom recurs, perform a
acquisition was not successful. deleted. reinstallation.
31403 FFCustomMsgBox [31403] Caption information It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
acquisition was not successful. or deleted. reinstallation.
31404 FFCustomMsgBox [31404] Failed in communicating This error is attributable to a problem with the Check the connected equipment, connection setup,
with other connected device. connected equipment or connection setup. and others.
31405 FFCustomMsgBox [31405] Failed in evacuating the The connected equipment may be faulty. Check the connected equipment.
IP.
31406 FFCustomMsgBox [31406] Failed in setting the IP. The connected equipment may be faulty. Check the connected equipment.
31407 FFCustomMsgBox [31407] Failed in setting the The connected equipment may be faulty. Check the connected equipment.
exposure size.
31408 FFCustomMsgBox [31408] Failed in setting the The connected equipment may be faulty. Check the connected equipment.
reference position for exposure.
31409 FFCustomMsgBox [31409] No response comes from The connected equipment may be faulty. Check the connected equipment.
other connected device.
31410 FFCustomMsgBox [31410] There is no answer from The connected equipment may be faulty. Check the connected equipment.
the device that ID information is
shared.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-86
Appendix A CL Error Message Table Appx MT A-87
Event Event Source Description Causes Remedies Remarks
31411 FFCustomMsgBox [31411] A Study can’t register This error is attributable to an improperly registered Check the menu registration information.
because the exposure menu menu.
registerd in IDT isn't registered in
IIP.
31412 FFCustomMsgBox [31412] An image data line with The connected equipment may be faulty. Check the connected equipment.
the reader is cut off.
31413 FFCustomMsgBox [31413] There are some The connection setup may be improper. Check the connection setup.
inconsistency in the IIP-RU
connection setting of the system
configuration.
31414 FFCustomMsgBox [31414] Failed in obtaining the The database file may be damaged or deleted. Restart. If the same symptom recurs, perform a
caption information (RIS tab). reinstallation.
31415 FFCustomMsgBox [31415] A communication error The connected equipment may be faulty. Check the connected equipment.
with RIS occurred.
31416 FFCustomMsgBox [31416] Some exposure menus This error is attributable to an improperly set menu Check the settings.
couldn’t be registered. parameter or other setup failure.
31417 FFCustomMsgBox [31417] An exposure menu couldn’ This error is attributable to an improperly set menu Check the settings.
t be registered. parameter or other setup failure.
31418 FFCustomMsgBox [31418] Failed in the reference of The connection setup may be faulty. Check the connection setup.
the reader device.
31419 FFCustomMsgBox [31419] The exposure condition The XCON settings (limit values) were inconsistent There is no practical problem because the limit values
values to be sent to the X-ray with the exposure condition preset values for the are transferred to the XCON.
apparatus was over the limit. menus.
31420 FFCustomMsgBox [31420] A failure occurred in the It is conceivable that the connected equipment may Check the connected equipment.
communication with the RIS. be faulty.
31422 FFCustomMsgBox [31422] Failed in registering the The patient information database operation was Restart. If the same symptom recurs, perform a
study to the patient information wrong. reinstallation.
database.
31423 FFCustomMsgBox [31423] Failed in image stitching The system was unstable. Restart. If the same symptom recurs, perform a
processing. reinstallation.
Ensure that only period is used as a symbol
representing a decimal point for values to be set in “OS
Settings - Regional Options”. If any symbol other than
a period is used, correct it appropriately.
For details of how to perform settings, see the section
concerned in “RI: Reinstalling the Software”.
31424 FFCustomMsgBox [31424] Failed in saving the The system was unstable. Restart. If the same symptom recurs, perform a
exposure result information. reinstallation.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-87
Appendix A CL Error Message Table Appx MT A-88
Event Event Source Description Causes Remedies Remarks
31425 FFCustomMsgBox [31425] Failed in setting actual Invalid characters were used for the performed No remedial action is needed because the process
exposure result value. procedure step description, protocol name, or filter will be continuously performed with the invalid settings
type. The radiation source-to-detector distance or replaced with the standard ones.
radiation time did not consist of numerals only.
The film output count or film size ID was out of range.
31426 FFCustomMsgBox [31426] Failed in acquiring Settings may have been corrupted. Restart the system. If the same symptom recurs,
coloring information. perform a reinstallation.
31427 FFCustomMsgBox [31427] Failed in image distribution The system was unstable. Restart the system. If the same symptom recurs,
processing. perform a reinstallation.
31428 FFCustomMsgBox [31428] Failed in displaying the The system was unstable. Restart the system. If the same symptom recurs,
study information list. perform a reinstallation.
31429 FFCustomMsgBox [31429] Failed in setting patient The system was unstable. Restart the system. If the same symptom recurs,
information. perform a reinstallation.
31430 FFCustomMsgBox [31430] Failed in acquiring patient The system was unstable. Restart the system. If the same symptom recurs,
information. perform a reinstallation.
31431 FFCustomMsgBox [31431] Failed in acquiring image The bitmap file may have been damaged or deleted. Restart the system. If the same symptom recurs,
(background). perform a reinstallation.
31441 FFCustomMsgBox [31441] Failed in acquiring It is conceivable that the file was damaged or deleted. Restart. If the same symptom recurs, perform a
parameters used for displaying It is also conceivable that the database file was reinstallation.
mammography images. damaged or deleted.
31444 FFCustomMsgBox [31444] Illegal information Polling to the shared folder with the receipt computer It is conceivable that the content of the study received
received from the outside. resulted in a failure. from the receipt computer does not match the CR
Console setting.
Check the connection setting and the system setting.
31445 FFCustomMsgBox [31445] Illegal information The patient cannot be registered because of a format Check to see that characters prohibited to use on
received from the outside. error that occurred with the text received from the the CR Console are not included in the transmitted
Fujitsu receipt computer. information. Retransmit then the study from the
receipt computer, as necessary.
31446 FFCustomMsgBox [31446] An error occurred for A study transmitted from the receipt computer cannot Check to see that characters prohibited to use on
connection with the equipment. be registered. the CR Console are not included in the transmitted
information. Retransmit then the study from the
receipt computer, as necessary.
31456 FFCustomMsgBox [31456] Failed in obtaining the The database file may have been damaged or Restart. If the same symptom recurs, perform a ID input section
caption information deleted. reinstallation.
(Preview confirmation message).
31457 FFCustomMsgBox [31457] Failed in obtaining the first The database file may have been damaged or Restart. If the same symptom recurs, perform a ID input section
page of the exposure guidance. deleted. reinstallation.
31458 FFCustomMsgBox [31458] Failed in starting up the The file may have been damaged or deleted. Restart. If the same symptom recurs, perform a ID input section
exposure guidance. reinstallation.
31459 FFCustomMsgBox [31459] Failed in initializing the The system was unstable. Restart. If the same symptom recurs, perform a ID input section
exposure guidance. reinstallation.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-88
Appendix A CL Error Message Table Appx MT A-89
Event Event Source Description Causes Remedies Remarks
31460 FFCustomMsgBox [31460] Failed in initialization of A connected device may have a problem. Check status of the connected device. ID input section
dose-area product meter.
31461 FFCustomMsgBox [31461] Failed in initialization of A connected device may have a problem. Check status of the connected device, and press the ID input section
dose-area product meter. “Retry” button as required.
31462 FFCustomMsgBox [31462] Failed in dose acquisition A connected device may have a problem. Check status of the connected device. ID input section
from dose-area product meter.
31850 FFCustomMsgBox [31850] Failed in communicating It is conceivable that the connected equipment may Check status of the connected equipment.
with X-ray equipment. have a problem or the network may be unstable.
31851 FFCustomMsgBox [31851] Failed in registering a The system is unstable. Restart the system. If the same symptom recurs,
reserved study. reinstall the system.
31852 FFCustomMsgBox [31852] Failed in starting a The system is unstable. Restart the system. If the same symptom recurs,
reserved study. reinstall the system.
31853 FFCustomMsgBox [31853] An error occurred with The system is unstable. Restart the system. If the same symptom recurs,
connection to the equipment. reinstall the system.
31854 FFCustomMsgBox [31854] Failed in searching a The system is unstable. Restart the system. If the same symptom recurs,
reserved study. reinstall the system.
31855 FFCustomMsgBox [31855] Received illegal It is conceivable that the connected equipment may Check information transmitted from the connected
information from the outside. have transmitted illegal information. equipment.
31856 FFCustomMsgBox [31856] Received illegal It is conceivable that the connected equipment may Check information transmitted from the connected
information from the outside. have transmitted illegal information. equipment.
32001 FFCustomMsgBox [32001] The card type is not The employed card type did not agree with the card Check both the system settings and employed card
acceptable. type defined by the system setup data. type.
32001 FFIIPInImgCtrl Initialize warning. [Detailed error A warning-level error occurred in an image database Check whether the SQL service manager is normally
information 32001 35 items] initialization process. The common probable causes operating. If the same symptom occurs while the
are as follows: SQL service manager is normally operating, initialize
the image database (the entire image data is then
• An abnormality occurred when the image database
deleted).
was accessed.
• An abnormality occurred when an information file
was accessed.
• An abnormality occurred when an image file was
created or referenced for image file recovery.
• The contents of the image database or information
file were illegal.
• An unrecoverable image file was encountered.
32001 FFIIPInImgCtrl DICOM SCP was Not found in DICOM SCP is not defined in the NetConfigDB. Check whether the SQL service manager is normally
NetConfigDB. operating. If the same symptom occurs while the
SQL service manager is normally operating, initialize
the image database (the entire image data is then
deleted).

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-89
Appendix A CL Error Message Table Appx MT A-90
Event Event Source Description Causes Remedies Remarks
32001 FFIIPInImgCtrl DICOM SCP control status error. Failed in starting the DICOM SCP control. Check whether the SQL service manager is normally
operating. If the same symptom occurs while the
SQL service manager is normally operating, initialize
the image database (the entire image data is then
deleted).
32001 FFIIPInImgCtrl DDO file load error. Failed in reading the information file (DDO). Check whether the SQL service manager is normally
operating. If the same symptom occurs while the
SQL service manager is normally operating, initialize
the image database (the entire image data is then
deleted).
32001 FFIIPInImgCtrl DDO file save error. Failed in storing the information file. (DDO). Check whether the SQL service manager is normally
operating. If the same symptom occurs while the
SQL service manager is normally operating, initialize
the image database (the entire image data is then
deleted).
32001 FFIIPInImgCtrl Size code was not found in DDO. There is no size code in the information file (DDO). Check whether the SQL service manager is normally
operating. If the same symptom occurs while the
SQL service manager is normally operating, initialize
the image database (the entire image data is then
deleted).
32001 FFIIPInImgCtrl RecordID was not found in DDO. There is no record ID in the information file (DDO). Check whether the SQL service manager is normally
operating. If the same symptom occurs while the
SQL service manager is normally operating, initialize
the image database (the entire image data is then
deleted).
32001 FFIIPInImgCtrl HQ file was not found in DDO. There is no HQ image file in the information file (DDO). Check whether the SQL service manager is normally
operating. If the same symptom occurs while the
SQL service manager is normally operating, initialize
the image database (the entire image data is then
deleted).
32001 FFIIPInImgCtrl Std file was not found in DDO. There is no standard image file name in the Check whether the SQL service manager is normally
information file (DDO). operating. If the same symptom occurs while the
SQL service manager is normally operating, initialize
the image database (the entire image data is then
deleted).
32001 FFIIPInImgCtrl Image size was not found in DDO. There is no image size in the information file (DDO). Check whether the SQL service manager is normally
operating. If the same symptom occurs while the
SQL service manager is normally operating, initialize
the image database (the entire image data is then
deleted).

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-90
Appendix A CL Error Message Table Appx MT A-91
Event Event Source Description Causes Remedies Remarks
32001 FFIIPInImgCtrl Image sizecode error. Illegal image size cede. Check whether the SQL service manager is normally
operating. If the same symptom occurs while the
SQL service manager is normally operating, initialize
the image database (the entire image data is then
deleted).
32001 FFIIPInImgCtrl Std file make error. Standard image generation processing error. Check whether the SQL service manager is normally
operating. If the same symptom occurs while the
SQL service manager is normally operating, initialize
the image database (the entire image data is then
deleted).
32001 FFIIPInImgCtrl Thumb file make error. Thumbnail image generation processing error. Check whether the SQL service manager is normally
operating. If the same symptom occurs while the
SQL service manager is normally operating, initialize
the image database (the entire image data is then
deleted).
32001 FFIIPInImgCtrl FoeEDR file make error. Reduced image generation processing error. Check whether the SQL service manager is normally
operating. If the same symptom occurs while the
SQL service manager is normally operating, initialize
the image database (the entire image data is then
deleted).
32001 FFIIPInImgCtrl Moire control error. Standard image generation processing error. Check whether the SQL service manager is normally
operating. If the same symptom occurs while the
SQL service manager is normally operating, initialize
the image database (the entire image data is then
deleted).
32001 FFIIPInImgCtrl Thumb control error. Thumbnail image generation processing error. Check whether the SQL service manager is normally
operating. If the same symptom occurs while the
SQL service manager is normally operating, initialize
the image database (the entire image data is then
deleted).
32001 FFIIPInImgCtrl ForEDR control error. Reduced image generation processing error. Check whether the SQL service manager is normally
operating. If the same symptom occurs while the
SQL service manager is normally operating, initialize
the image database (the entire image data is then
deleted).
32001 FFIIPInImgCtrl EDR process error. EDR processing error. Check whether the SQL service manager is normally
operating. If the same symptom occurs while the
SQL service manager is normally operating, initialize
the image database (the entire image data is then
deleted).

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-91
Appendix A CL Error Message Table Appx MT A-92
Event Event Source Description Causes Remedies Remarks
32001 FFIIPInImgCtrl Jpeg control error. JPEG processing error. Check whether the SQL service manager is normally
operating. If the same symptom occurs while the
SQL service manager is normally operating, initialize
the image database (the entire image data is then
deleted).
32001 FFIIPInImgCtrl InfoFileURL was not found in The InfoFileURL field cannot be found in the image Check whether the SQL service manager is normally
ImageDB. DB. operating. If the same symptom occurs while the
SQL service manager is normally operating, initialize
the image database (the entire image data is then
deleted).
32001 FFIIPInImgCtrl InfoFile was “EMPTY” in The InfoFileURL field in the image DB is “EMPTY”. Check whether the SQL service manager is normally
ImageDB. operating. If the same symptom occurs while the
SQL service manager is normally operating, initialize
the image database (the entire image data is then
deleted).
32001 FFIIPInImgCtrl StdImageFileURL was not found The StdImageFileURL field cannot be found in the Check whether the SQL service manager is normally
in ImageDB. image DB. operating. If the same symptom occurs while the
SQL service manager is normally operating, initialize
the image database (the entire image data is then
deleted).
32001 FFIIPInImgCtrl ThmImageFileURL was not found The ThmImageFileURL field cannot be found in the Check whether the SQL service manager is normally
in ImageDB. image DB. operating. If the same symptom occurs while the
SQL service manager is normally operating, initialize
the image database (the entire image data is then
deleted).
32001 FFIIPInImgCtrl MaskImageFileURL was not found The MaskImageFileURL field cannot be found in the Check whether the SQL service manager is normally
in ImageDB. image DB. operating. If the same symptom occurs while the
SQL service manager is normally operating, initialize
the image database (the entire image data is then
deleted).
32001 FFIIPInImgCtrl EDRBackupFileURL was not The EDRBackupFileURL field cannot be found in the Check whether the SQL service manager is normally
found in ImageDB. image DB. operating. If the same symptom occurs while the
SQL service manager is normally operating, initialize
the image database (the entire image data is then
deleted).
32001 FFIIPInImgCtrl StdImageFileURL set error in Failed in registering the standard image file name in Check whether the SQL service manager is normally
ImageDB. the image DB. operating. If the same symptom occurs while the
SQL service manager is normally operating, initialize
the image database (the entire image data is then
deleted).

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-92
Appendix A CL Error Message Table Appx MT A-93
Event Event Source Description Causes Remedies Remarks
32001 FFIIPInImgCtrl ThmImageFileURL set error in Failed in registering the thumbnail image file name in Check whether the SQL service manager is normally
ImageDB. the image DB. operating. If the same symptom occurs while the
SQL service manager is normally operating, initialize
the image database (the entire image data is then
deleted).
32001 FFIIPInImgCtrl MaskImageFileURL set error in Failed in registering the reduced image file name in Check whether the SQL service manager is normally
ImageDB. the image DB. operating. If the same symptom occurs while the
SQL service manager is normally operating, initialize
the image database (the entire image data is then
deleted).
32001 FFIIPInImgCtrl ImageDB access(get_Fields) Image DB access error. Check whether the SQL service manager is normally
error. operating. If the same symptom occurs while the
SQL service manager is normally operating, initialize
the image database (the entire image data is then
deleted).
32001 FFIIPInImgCtrl ImageDB access error. Image DB access error. Check whether the SQL service manager is normally
operating. If the same symptom occurs while the
SQL service manager is normally operating, initialize
the image database (the entire image data is then
deleted).
32001 FFIIPInImgCtrl UpdateCloseRec error. Image DB access error. Check whether the SQL service manager is normally
operating. If the same symptom occurs while the
SQL service manager is normally operating, initialize
the image database (the entire image data is then
deleted).
32001 FFIIPInImgCtrl Create file error. Failed in creating a file. Check whether the SQL service manager is normally
operating. If the same symptom occurs while the
SQL service manager is normally operating, initialize
the image database (the entire image data is then
deleted).
32001 FFIIPInImgCtrl File open error. Failed in opening a file. Check whether the SQL service manager is normally
operating. If the same symptom occurs while the
SQL service manager is normally operating, initialize
the image database (the entire image data is then
deleted).
32001 FFIIPInImgCtrl File close error. Failed in closing a file. Check whether the SQL service manager is normally
operating. If the same symptom occurs while the
SQL service manager is normally operating, initialize
the image database (the entire image data is then
deleted).

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-93
Appendix A CL Error Message Table Appx MT A-94
Event Event Source Description Causes Remedies Remarks
32001 FFIIPInImgCtrl File read error. Failed in reading a file. Check whether the SQL service manager is normally
operating. If the same symptom occurs while the
SQL service manager is normally operating, initialize
the image database (the entire image data is then
deleted).
32001 FFIIPInImgCtrl File write error. Failed in writing a file. Check whether the SQL service manager is normally
operating. If the same symptom occurs while the
SQL service manager is normally operating, initialize
the image database (the entire image data is then
deleted).
32001 FFInImgMonitorCtrl Initialize warning.%n[%1] A warning-level error occurred during initialization Nothing particular. (Processing was continued.)
processing.
32001 FFInImgMonitorDispCtrl Initialize warning.%n[%1] A warning-level error occurred during initialization Nothing particular. (Processing was continued.)
processing.
32002 FFCustomMsgBox [32002] Failed in reading the card. A simple read error occurred or the problem might Read the card again. If the same symptom recurs,
have been caused by damaged contents of a card or check the contents of the card and the magnetic card
a broken magnetic card reader. reader.
32002 FFIIPInImgCtrl Data not found.(warning) [Detailed A warning-level error was found in information file Nothing in particular. (The data found abnormal was
error information 32002 1 item] data. replaced by the default value to continue with the
process.)
32002 FFIIPInImgCtrl Data not found. There is no data in the information file (DDO). Nothing in particular. (The data found abnormal was
replaced by the default value to continue with the
process.)
32002 FFInImgMonitorCtrl Data not found.(warning) %n[%1] A warning-level error was detected in the information Nothing particular. (The error data was replaced by
file data. the default value and processing was continued.)
32002 FFInImgMonitorDispCtrl Data not found.(warning) %n[%1] A warning-level error was detected in the information Nothing particular. (The error data was replaced by
file data. the default value and processing was continued.)
32003 FFInImgMonitorCtrl Status warning. [Detailed error A process request was issued while an initialization or Nothing in particular. (The process request was
information 32003 1 item] termination process was being performed. rejected.)
32003 FFIIPInImgCtrl Status error.(IDInfoChange Image display request method execution timing error Nothing in particular. (Processing requested was
method) after ID information was changed. rejected.)
32003 FFInImgMonitorCtrl Status warning.%n[%1] A warning-level error occurred during method Nothing particular. (The error data was replaced by
processing. the default value and processing was continued.)
32003 FFInImgMonitorDispCtrl Status warning.%n[%1] A warning-level error occurred during method Nothing particular. (The error data was replaced by
processing. the default value and processing was continued.)
32012 FFCustomMsgBox [32012] Illegal information has The problem was caused, for instance, by an invalid Check the contents of the card.
been detected in the patient character contained in the contents of the card.
information.
32015 FFCustomMsgBox [32015] Failed in reading the IP#. The problem was caused, for instance, by an Check the contents of the barcode.
incompatible barcode format.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-94
Appendix A CL Error Message Table Appx MT A-95
Event Event Source Description Causes Remedies Remarks
32042 FFCustomMsgBox [32042] Failed in calculating EI or • The input parameter (DDO file) is invalid. • Reperform exposure.
DI. • The ExposureIndex.prm file is illegal • Correct the ExposureIndex.prm file.
(reading error or correction error).
34001 FFCustomMsgBox [34001] The same patient The card read was about the patient whose This dialog box merely opens to attract the
information has been input. examination was being conducted. user’s attention. No particular response is required.
34002 FFCustomMsgBox [34002] A certain examination The last examination was ended abruptly during an Check information sent by the connected device.
finished before the completion of image read process (due, for instance, to a power
an image read. failure).
34084 FFCustomMsgBox [34084] Illegal information was Illegal information was received from the RIS. Correct the information properly and then restart the
transmitted from the RIS. Information of the started study includes the one that study from the RIS.
is not allowed for the CR Console.
34085 FFCustomMsgBox [34085] Communication with the A connected device may have a problem or the Reconnect. If the same symptom recurs, check status
RIS was disabled. network can be unstable. of the connected device.
34091 FFCustomMsgBox [34091] An unknown error An error of unknown cause occurred with the Restart.
occurred in an attempt to connect connection to the Toshiba RIS.
to the RIS.
34092 FFCustomMsgBox [34092] A failure occurred when The system was unstable. Restart.
starting the ordered study.
34094 FFCustomMsgBox [34094] A failure occurred when An attempt to inform the RIS of the changed Determine the same technologist both for the RIS and
notifying the RIS of the changed technologist resulted in a failure. the CR Console.
technologist.
34095 FFCustomMsgBox [34095] A failure occurred in Communication with the RIS at startup of an ordered Stop the study exposure started via the Toshiba RIS
communication with the RIS at study resulted in a failure. and then restart it.
startup of a study.
34096 FFCustomMsgBox [34096] A failure occurred in Communication with the RIS at the end of an order Confirm the actual exposure result. If information
communication with the RIS when study resulted in a failure. of the actual exposure result is not reflected
finishing a study. appropriately on the data, input it on the RIS screen.
If the same symptom remains, restart the relevant
system.
34097 FFCustomMsgBox [34097] A failure occurred when The system was unstable. Match technologist registration information of this
changing the RIS user. equipment with that of the connected device.
34098 FFCustomMsgBox [34098] Failed in communicating Display of RIS view screen was disabled. Restart the relevant system. If the same symptom
with other connected device. remains, check settings for connection of the
connected device.
34107 FFCustomMsgBox [34107] Do you wish to delete When rotating a marker-specified image, determine When the [Yes] button is pressed, the markers are ID input section
markers and execute the whether or not to delete the markers. deleted and the image with no markers is rotated.
operation? When the [No] button is pressed, the image is rotated
without deleting the markers.
34109 FFCustomMsgBox [34109] Images were input during This error message is issued if the 3rd image is input Re-perform image stitching. ID input section
the preview display. while 2 stitched images are being previewed.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-95
Appendix A CL Error Message Table Appx MT A-96
Event Event Source Description Causes Remedies Remarks
34112 FFCustomMsgBox [34112] One of the target menus Image stitching was performed while 1 of the 2 Re-perform image stitching after the completion of ID input section
for stitching is in progress. menus targeted for stitching processing was being image input in the menu that is in process.
processed.
34310 FFCustomMsgBox [34310] Patient information of the Patient information of the same patient ID number has Pressing the “YES” button will overwrite the patient ID input section
same patient ID number has been been changed. information to continue necessary processing. Press
changed. the “NO” button to continue processing without
overwriting the patient information. To suspend
processing, press the “Cancel” button.
34842 FFCustomMsgBox [34842] Incorrect password. Input password data is incorrect. Input a correct password.
39001 FFIIPInImgCtrl Memory allocate error. [E1027] Sufficient memory was not available to the system. Restart.
39001 FFIIPInImgCtrl Socket recv buffer. Failed in acquiring the socket reception buffer. Restart.
39001 FFIIPInImgCtrl Pantomo work buffer. Failed in acquiring the pantomography reading buffer. Restart.
39001 FFIIPInImgCtrl ImgReadProcess memory allocate Failed in memory acquisition. Restart.
error.
39001 FFIIPInImgCtrl Memory allocate error. Failed in memory acquisition. Restart.
39001 FFIIPInImgCtrl Memory Exception error. An exception generated when acquiring memory. Restart.
39001 FFIIPInImgCtrl Disp Qeue param. Failed in acquiring an image display queue. Restart.
39001 FFIIPInImgCtrl Read qeue param. Failed in acquiring an image reading queue. Restart.
39001 FFIIPInImgCtrl ReadThread main param. Failed in acquiring image input thread parameters. Restart.
39001 FFIIPInImgCtrl JpegThread main param. Failed in acquiring JPEG compression thread Restart.
parameters.
39001 FFIIPInImgCtrl Image Data area. Failed in acquiring image reading date area. Restart.
39001 FFIIPInImgCtrl Image Time area. Failed in acquiring image reading time area. Restart.
39001 FFIIPInImgCtrl DICOMDataObj set data area. Failed in acquiring information file (DDO) setup Restart.
memory area.
39001 FFIIPInImgCtrl EDR data. Failed in acquiring EDR image separation processing Restart.
area.
39001 FFIIPInImgCtrl EDR out data. Failed in acquiring EDR image separation processing Restart.
area.
39001 FFIIPInImgCtrl Disp image data. Image display area. Restart.
39001 FFIIPInImgCtrl SkGp Image area. Failed in acquiring image area after normalization Restart.
processing.
39001 FFIIPInImgCtrl GammaTable(LUT) area. Failed in acquiring the γ processing table. Restart.
39001 FFIIPInImgCtrl Beta param area. Failed in acquiring the β processing parameter area. Restart.
39001 FFIIPInImgCtrl DRC param area. Failed in acquiring the DRC processing parameter Restart.
area.
39001 FFIIPInImgCtrl MFP-DRC param area. Failed in acquiring the MFP-DRC processing Restart.
parameter area.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-96
Appendix A CL Error Message Table Appx MT A-97
Event Event Source Description Causes Remedies Remarks
39001 FFIIPInImgCtrl MFP-USM param area. Failed in acquiring the MFP-USM processing Restart.
parameter area.
39001 FFRUInpImgMgr Initialization failed. %n[%1] The initialization process was not successfully Restart.
performed.
39001 FFInImgMonitorCtrl Memory allocate error. %n[%1] System memory was insufficient. Restart.
39002 FFIIPInImgCtrl Message post/get error. [Detailed The system was unstable. Restart.
error information 39002 5 items]
39002 FFIIPInImgCtrl PostThreadMessage (%s) error. Failed in (%s) message transmission while in image Restart.
input processing.
39002 FFIIPInImgCtrl PostMessage error. Failed in message transmission while in image input Restart.
processing.
39002 FFIIPInImgCtrl GetMessage (%s) error. Failed in (%s) message reception while in image input Restart.
processing.
39002 FFIIPInImgCtrl GetMessage error. Failed in message reception while in image input Restart.
processing.
39002 FFIIPInImgCtrl Post/Get Message error. Failed in message transmission/reception while in Restart.
image input processing.
39002 FFRUInpImgMgr Finalize Failed. %n[%1] The finalization process was not successfully Restart.
performed.
39002 FFInImgMonitorCtrl Message post/get error. %n[%1] The system was unstable. Restart.
39003 FFIIPInImgCtrl IIPInImg control error. [Detailed An abnormality was found in the IIP input image Restart.
error information 39003 19 items ] process.
39003 FFIIPInImgCtrl Get DispatchID error. Property = Failed in setting DICOM SCP control properties (%s). Restart.
%s
39003 FFIIPInImgCtrl Invoke error. Property = %s Failed in setting DICOM SCP control properties (%s). Restart.
39003 FFIIPInImgCtrl Get DispatchID error. Property = Failed in viewing DICOM SCP control properties (%s). Restart.
%s
39003 FFIIPInImgCtrl Invoke error. Property = %s Failed in viewing DICOM SCP control properties (%s). Restart.
39003 FFIIPInImgCtrl Get DispatchID error. Method = Failed in performing the DICOM SCP control method Restart.
%s (%s).
39003 FFIIPInImgCtrl Invoke error. Method = %s Failed in performing the DICOM SCP control method Restart.
(%s).
39003 FFIIPInImgCtrl DispQeue was full. Failed in registering an image display queue. Restart.
39003 FFIIPInImgCtrl DispQeue status error. Failed in registering an image display queue (illegal Restart.
status).
39003 FFIIPInImgCtrl Thumbnail image disp error. Failed in displaying a pre-reading image. Restart.
39003 FFIIPInImgCtrl EDR/ID image disp error. Failed in displaying a processed image. Restart.
39003 FFIIPInImgCtrl Data not found. The relevant menu code cannot be found in the image Restart.
processing parameters.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-97
Appendix A CL Error Message Table Appx MT A-98
Event Event Source Description Causes Remedies Remarks
39003 FFIIPInImgCtrl Image File Path get error. Failed in acquiring the directory path name of the Restart.
image file.
39003 FFIIPInImgCtrl File name set error.(%s) Failed in setting the (%s) file name in the information Restart.
file (DDO).
39003 FFIIPInImgCtrl JPEG Thread error. Failed in creating a JPEG compression thread. Restart.
39003 FFIIPInImgCtrl Image process error(%s). Failed in starting the image processing control. Restart.
39003 FFIIPInImgCtrl Input image control error. Internal discrepancy found during input image Restart.
processing.
39003 FFIIPInImgCtrl File type error. Internal discrepancy found during input image Restart.
processing.
39003 FFIIPInImgCtrl Img type error. Internal discrepancy found during input image Restart.
processing.
39003 FFIIPInImgCtrl Exception error. An exception found during input image processing. Restart.
39003 FFRUInpImgMgr Invalid Status. %n[%1] The status was invalid. Restart.
39004 FFIIPInImgCtrl CR-Image control error. [Detailed An abnormal end was found in an image file creation Restart.
error information 39004 13 items] process or image display process.
The problem is attributable to a disk.
39004 FFIIPInImgCtrl Disp control(%s Method) error. Image display processing error (method name: %s). Restart.
39004 FFIIPInImgCtrl EDR control (%s) error. Error occurred during EDR processing (processing Restart.
ID:%s).
39004 FFIIPInImgCtrl EDR process error. Error occurred during EDR processing. Restart.
39004 FFIIPInImgCtrl ForEDR control error. Error occurred during reduced image creation Restart.
processing.
39004 FFIIPInImgCtrl HQ file create error.(%s) Failed in creating an HQ image file (file ID). Restart.
39004 FFIIPInImgCtrl Image Jpeg-compress error. Error occurred during JPEG compression processing. Restart.
39004 FFIIPInImgCtrl Image process error.(%s) Failed in starting the image processing control. Restart.
(Internal processing name: %s)
39004 FFIIPInImgCtrl Image sizecode error. Illegal image size code. Restart.
39004 FFIIPInImgCtrl ImageDB/DDO access error.(%s) Error occurred in access to the image DB or Restart.
information file (DDO).
39004 FFIIPInImgCtrl Jpeg control (%s) error. Error occurred during JPEG processing (processing Restart.
ID: %s).
39004 FFIIPInImgCtrl Miore control error. Error occurred during standard image creating Restart.
processing.
39004 FFIIPInImgCtrl SkGp control (%s) error. Error occurred during normalization processing. Restart.
(Processing ID:%s)
39004 FFIIPInImgCtrl Thumbnail control error. Error occurred during thumbnail image creating Restart.
processing.
39004 FFRUInpImgMgr Thread Invoke failed. %n[%1] Thread creation was not successfully completed. Restart.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-98
Appendix A CL Error Message Table Appx MT A-99
Event Event Source Description Causes Remedies Remarks
39004 FFInImgMonitorCtrl CR-Image control error. %n[%1] An error was detected during image processing. Restart.
39005 FFIIPInImgCtrl Pipe error. [Detailed error The system remains unstable. Restart.
information 39005 1 item ]
39005 FFIIPInImgCtrl Pipe create error.(%s) Failed in creating a pipe. (Pipe type: %s) Restart.
39005 FFRUInpImgMgr Socket Access Failed. %n[%1] A socket communication error occurred. Check the network status and then restart the system.
39005 FFInImgMonitorCtrl Pipe error. %n[%1] The system was unstable. Restart.
39006 FFIIPInImgCtrl File error. [Detailed error The system remains unstable. Restart.
information 39006 7 items]
39006 FFIIPInImgCtrl File error. Failed in accessing the file. Restart.
39006 FFIIPInImgCtrl File error(%s). Failed in accessing the file. (Processing type.) Restart.
39006 FFIIPInImgCtrl Create file error. Failed in file creation processing. Restart.
39006 FFIIPInImgCtrl CreateFileMapping error. Failed in file mapping processing. Restart.
39006 FFIIPInImgCtrl MapViewOfFile error. Failed in file mapping processing. Restart.
39006 FFIIPInImgCtrl EDRImageFile mapping error. Failed in mapping the reduced image file before EDR Restart.
processing.
39006 FFIIPInImgCtrl File mapping error. Failed in file mapping processing. Restart.
39006 FFRUInpImgMgr System Function Call Failed. An error was returned by a system call (Win32 API, Restart.
%n[%1] etc.).
39006 FFInImgMonitorCtrl File error.%n[%1] The system was unstable. Restart.
39007 FFIIPInImgCtrl Data not found.(error) [Detailed The data in the image database or information file Make an exposure again. If the error recurs, initialize
error information 39007 3 items] was abnormal. the image database (the entire image data is then
deleted).
39007 FFIIPInImgCtrl Data not found. / DDO Data not The relevant VR cannot be found in the information Make an exposure again. If the error recurs, initialize
found. file (DDO). the image database (the entire image data is then
deleted).
39007 FFIIPInImgCtrl Data not found.(%s) / DDO Data The relevant data cannot be found in the information Make an exposure again. If the error recurs, initialize
not found.(%s) file (DDO). the image database (the entire image data is then
deleted).
39007 FFIIPInImgCtrl %s GetVR error. Failed in acquiring VR shown by %s. Make an exposure again. If the error recurs, initialize
the image database (the entire image data is then
deleted).
39007 FFRUInpImgMgr Invalid Receive Data. %n[%1] Invalid data was received from the RU. Check the connection to the RU.
39007 FFInImgMonitorCtrl Data not found.(error) %n[%1] There is an error in the image database/information Restart.
file data.
39008 FFIIPInImgCtrl DB access error. [Detailed error An abnormality occurred when a database was Restart. If the same symptom frequently occurs,
information 39008 19 items] accessed. perform a reinstallation.
39008 FFIIPInImgCtrl ImageDB key get error. Image DB key name acquisition error. Restart. If the same symptom recurs, perform a
reinstallation.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-99
Appendix A CL Error Message Table Appx MT A-100
Event Event Source Description Causes Remedies Remarks
39008 FFIIPInImgCtrl ImageDB connect error. Image DB connection error. Restart. If the same symptom recurs, perform a
reinstallation.
39008 FFIIPInImgCtrl ImageDB OpenRecordset error. Image DB open error. Restart. If the same symptom recurs, perform a
reinstallation.
39008 FFIIPInImgCtrl ImageDB get_Fields error. Image DB viewing error. Restart. If the same symptom recurs, perform a
reinstallation.
39008 FFIIPInImgCtrl ImageDB get_Item error. Image DB viewing error. Restart. If the same symptom recurs, perform a
reinstallation.
39008 FFIIPInImgCtrl ImageDB get_Value error. Image DB viewing error. Restart. If the same symptom recurs, perform a
reinstallation.
39008 FFIIPInImgCtrl ImageDB put_Value error. Image DB setup error. Restart. If the same symptom recurs, perform a
Data:%s reinstallation.
39008 FFIIPInImgCtrl ImageDB SetValue error.(%s) Image DB setup error. Restart. If the same symptom recurs, perform a
reinstallation.
39008 FFIIPInImgCtrl ImageDB (%s) set error. Image DB setup error. Restart. If the same symptom recurs, perform a
reinstallation.
39008 FFIIPInImgCtrl DICOM&ImageDB data set error. Image DB setup error. Restart. If the same symptom recurs, perform a
reinstallation.
39008 FFIIPInImgCtrl ImageDB UpdateRecordset error. Image DB update error. Restart. If the same symptom recurs, perform a
reinstallation.
39008 FFIIPInImgCtrl ImageDB CloseRecordset error. Image DB close error. Restart. If the same symptom recurs, perform a
reinstallation.
39008 FFIIPInImgCtrl ImageDB close error. Image DB close error. Restart. If the same symptom recurs, perform a
reinstallation.
39008 FFIIPInImgCtrl ImageDB: ReceiveFlag set error. ReceiveFlag setup error. Restart. If the same symptom recurs, perform a
reinstallation.
39008 FFIIPInImgCtrl ImageDB access error. Image DB access error. Restart. If the same symptom recurs, perform a
reinstallation.
39008 FFIIPInImgCtrl ImageDB access(%s) error. Image DB access error. Restart. If the same symptom recurs, perform a
reinstallation.
39008 FFIIPInImgCtrl ImageDB access error.(%s) Image DB access error. Restart. If the same symptom recurs, perform a
reinstallation.
39008 FFIIPInImgCtrl SysConfig DB access error. SysConfig DB access error. Restart. If the same symptom recurs, perform a
reinstallation.
39008 FFIIPInImgCtrl Net Config DB access error. NetConfig DB access error. Restart. If the same symptom recurs, perform a
reinstallation.
39008 FFIIPInImgMgr Insufficient memory. %n[%1] The available memory was insufficient. Restart.
39008 FFInImgMonitorCtrl DB access error.%n[%1] An error occurred with accessing to several Restart.
databases.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-100
Appendix A CL Error Message Table Appx MT A-101
Event Event Source Description Causes Remedies Remarks
39009 FFIIPInImgCtrl Socket access error. [Detailed The problem is attributable to a disconnected RU or Check the connection to the RU.
error information 39009 5 items] the like.
39009 FFIIPInImgCtrl Socket error. Error occurred during socket generation termination Check the connection to the RU.
processing.
39009 FFIIPInImgCtrl Socket connect error. Error occurred during socket connection processing. Check the connection to the RU.
39009 FFIIPInImgCtrl Socket close error. Error occurred during socket disconnection Check the connection to the RU.
processing.
39009 FFIIPInImgCtrl Socket recv error. Error occurred while receiving data from the socket. Check the connection to the RU.
39009 FFIIPInImgCtrl Socket recv time out. Timeout detected while receiving data from the Check the connection to the RU.
socket.
39009 FFIIPInImgMgr Create Dicom Data Object Failed. Data object creation was not successfully completed. Restart.
%n[%1]
39010 FFIIPInImgCtrl DICOMDataObj data area. An exception occurred when accessing to the Restart. If the same symptom recurs, perform a
information file (DDO). reinstallation.
39010 FFIIPInImgCtrl Exception error. Exception handling was done. Restart. If the same symptom frequently occurs,
[Detailed error information 39010 perform a reinstallation.
5 items]
39010 FFIIPInImgCtrl Exception error. Property = %s An exception occurred when setting DICOM SCP Restart. If the same symptom recurs, perform a
control properties (%s). reinstallation.
39010 FFIIPInImgCtrl Exception error. Method = %s An exception occurred when performing the DICOM Restart. If the same symptom recurs, perform a
SCP control method (%s). reinstallation.
39010 FFIIPInImgCtrl Exception error. / Exception An exception occurred. (Processing type.) Restart. If the same symptom recurs, perform a
error.(%s) reinstallation.
39010 FFIIPInImgCtrl Memory Exception error. An exception occurred while acquiring memory. Restart. If the same symptom recurs, perform a
reinstallation.
39010 FFIIPInImgMgr Input Image Operation is Busy. The disk was full or the connection limit was exceeded This is not an operating error. Wait a while and then
%n[%1] by the input request (busy state). input again.
39010 FFInImgMonitorCtrl Exception error.%n[%1] An exceptional error occurred. Restart.
39010 FFInImgMonitorDispCtrl Exception error.%n[%1] An exceptional error occurred. Restart.
39035 FFCustomMsgBox [39035] Unable to obtain study Information coming from the RIS may not include Include study UID in the information that comes from
UID from the list (worklist). study UID. the RIS.
39044 FFCustomMsgBox [39044] No list has been selected. There may be a problem on the connection device Check the connection device status.
side.
39045 FFCustomMsgBox [39045] Failed in image input A failure occurred in an attempt to acquire an image Restart the system. If the same failure recurs, restart
processing. from the Image Reader. both the Image Reader and the system.
Restarting the Image Reader disables image
retransmission from it to the system.
If the same error recurs even after restarting the
Image Reader, perform a reinstallation.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-101
Appendix A CL Error Message Table Appx MT A-102
Event Event Source Description Causes Remedies Remarks
39901 FFInitializingStudy [%1] An exception error occurred. Restart.
An exception error occurred(%2).
39902 FFInitializingStudy [%1] An error occurred. Restart.
%2.
40001 FFCustomMsgBox [40001] An error of unknown The system was unstable. Restart. If the same symptom recurs, perform a
cause occurred. reinstallation.
40002 FFQAMsgBox A communication error with Ascent Linkage application was not operative. Restart. If the same symptom recurs, perform a
View occurred. reinstallation.
40200 FFQAMsgBox Process Communication Control The method return value for the inter-process Restart.
Error. communication control resulted in an error.
[File Name] [Function Name]
[Error Code]
40201 FFQAMsgBox Journal Proc Failure. The method return value for the log save control Restart.
[File Name] [Function Name] resulted in an error.
[Error Code]
40202 FFQAMsgBox CustomMessageCtrl Access The return value for the custom message box control Restart.
Failure. resulted in an error.
[File Name] [Function Name]
[Error Code]
40203 FFQAMsgBox Image DB Access Control Error. The method return value for the image database Restart.
[File Name] [Function Name] access control resulted in an error.
[Error Code]
40204 FFQAMsgBox Media DB Access Control Error. The method return value for the media database Restart.
[File Name] [Function Name] access control resulted in an error.
[Error Code]
40205 FFQAMsgBox Process Communication API Error. The method return value for the inter-process Restart.
[File Name] [Function Name] communication API resulted in an error.
[Error Code]
40206 FFQAMsgBox SysConfig DB Access Error. An error occurred with connection/disconnection/value Restart.
[File Name] [Function Name] acquisition/value setup for the system setup database
[Error Code] access API.
40207 FFQAMsgBox LangStr DB Access Error. An error occurred with connection/disconnection of Restart.
[File Name] [Function Name] the character string database access API.
[Error Code]
40208 FFQAMsgBox LangMsgBox DB Access Error. An error occurred with connection/disconnection of Restart.
[File Name] [Function Name] the message box database access API.
[Error Code]
40209 FFQAMsgBox Flag DB Access Error. An error occurred with connection/value acquisition/ Restart.
[File Name] [Function Name] value setup/disconnection of the flag database
[Error Code] access.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-102
Appendix A CL Error Message Table Appx MT A-103
Event Event Source Description Causes Remedies Remarks
40210 FFQAMsgBox Return value of a ImgDeliveryCom The method return value for the image distribution Restart.
makes an error. instruction component resulted in an error.
[File Name] [Function Name]
[Error Code]
40211 FFQAMsgBox NetConfig DB Access Error. An error occurred with connection/disconnection/ Restart.
[File Name] [Function Name] value acquisition/value setup for the network setup
[Error Code] database (irreplaceable).
41001 FFCustomMsgBox [41001] The device is not ready. No floppy disk was set in position. Set media that is appropriate for the device.
41002 FFCustomMsgBox [41002] Remaining capacity is The file to be copied was too large to fit onto the Switch to larger-capacity media.
insufficient. media at the receiving end.
41003 FFCustomMsgBox [41003] Destination for file copy is An invalid pathname was specified as the file copy Check the system setup.
illegal. destination.
41004 FFCustomMsgBox [41004] E-mail program cannot be Outlook was not properly set up. Exit IIP and then complete Outlook setup.
started.
41005 FFCustomMsgBox [41005] No data cannot be written The disk was write-protected or damaged. Check the disk.
on the disk.
41106 FFCustomMsgBox [41106] Hard Disk Full. The hard disk was full. Exit QA, delete unnecessary images from the list, and
retry the distribution.
41107 FFCustomMsgBox [41107] Hard Disk Full. The hard disk was full. Exit QA, delete unnecessary images from the list, and
retry the distribution.
41108 FFCustomMsgBox [41108] Failed in reading the LUT No JPEG image gradation correction file is available Check the correction file.
file for JPEG Image. or the format is illegal.
41109 FFCustomMsgBox [41109] A menu of a different A menu of a different modality was selected. Select a menu of the same modality.
modality has been selected.
41110 FFCustomMsgBox [41110] Failed in access to the The system was unstable. Restart. If the same symptom recurs, perform a
image database. reinstallation.
41111 FFCustomMsgBox [41111] Failed in access to the It is conceivable that the shared host has not been Check targets involved in the shared host.
image database. started.
41112 FFCustomMsgBox [41112] Failed in access to the It is conceivable that QA processing was performed Check other equipment or perform another study.
image database. on other equipment.
41113 FFCustomMsgBox [41113] Failed in access to the It is conceivable that the shared host has not been Check targets involved in the shared host.
image file. started.
41114 FFCustomMsgBox [41114] Failed in saving the It is conceivable that the shared host has not been Check targets involved in the shared host.
information. started.
41115 FFCustomMsgBox [41115] Failed in access to the It is conceivable that the shared host has not been Check targets involved in the shared host.
image file. started.
41116 FFCustomMsgBox [41116] Failed in saving the It is conceivable that the shared host has not been Check targets involved in the shared host.
information. started.
41117 FFCustomMsgBox [41117] Failed in saving the It is conceivable that the shared host has not been Check targets involved in the shared host.
information. started.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-103
Appendix A CL Error Message Table Appx MT A-104
Event Event Source Description Causes Remedies Remarks
41118 FFCustomMsgBox [41118] Failed in image output It is conceivable that the shared host has not been Check targets involved in the shared host.
processing. started.
41119 FFCustomMsgBox [41119] Failed in QA startup The system was unstable. Restart. If the same symptom recurs, perform a
processing. reinstallation.
41120 FFCustomMsgBox [41120] Failed in access to the It is conceivable that the shared host has not been Check targets involved in the shared host.
image file. started.
41130 FFCustomMsgBox [41130] Failed in replacing an No extension menus have been registered. Check menu registration information.
image.
41131 FFCustomMsgBox [41131] Study information cannot It is conceivable that system settings for the study # Check the settings.
be modified. and ID # have been changed.
41140 FFCustomMsgBox [41140] The function cannot be A function that was called up did not match the Check the customized settings.
implemented. optional system settings.
41141 FFCustomMsgBox [41141] An error occurred. The system was unstable. Reinstall the program if the same symptom recurs
after restarting the equipment.
41150 FFCustomMsgBox [41150] Failed in file output A failure occurred in accessing the transmission file. Restart. If the same symptom recurs, perform a
processing. The system may have been unstable. reinstallation.
41151 FFCustomMsgBox [41151] There is no free space on The hard disk was full. Exit QA processing, delete unnecessary images from
the hard disk. the list, and retry output processing.
41152 FFCustomMsgBox [41152] Free space is insufficient The hard disk was full. Exit QA processing, delete unnecessary images from
on the destination for output. the list, and retry output processing.
41200 FFQAMsgBox HDD FULL. The hard disk was full. Increase the free hard disk space and then retry
[File Name] [Function Name] operation.
[Error Code]
41201 FFQAMsgBox The specified path does not exist. The specified path was not found. Check path settings.
[File Name] [Function Name]
[Error Code]
41202 FFQAMsgBox Media are not ready. No media was ready. Check the media status.
[File Name] [Function Name]
[Error Code]
41203 FFQAMsgBox The capacity of copy place media The capacity of the media targeted for copy was Replace the media for anyone of larger capacity.
is insufficient. insufficient.
[File Name] [Function Name]
[Error Code]
41210 FFQAMsgBox Return value of a ImgDeliveryCom The method return value for the image distribution Check the destination for image distribution and then
makes an error. instruction component resulted in an error. (Processing retry.
[File Name] [Function Name] other than image distribution can be continued.)
[Error Code]
42200 FFQAMsgBox Can’t Get Bitmap (Processing Failed in acquiring a bitmap (replaceable). Reinstall the program.
continuation).
[File Name] [Function Name]
[Error Code]

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-104
Appendix A CL Error Message Table Appx MT A-105
Event Event Source Description Causes Remedies Remarks
42201 FFQAMsgBox CustomMessageCtrl Access The return value for the custom message box control Reinstall the program.
Failure(Processing continuation). resulted in an error.
[File Name] [Function Name]
[Error Code]
42202 FFQAMsgBox SysConfig DB Access An error occurred when obtaining a system setup Reinstall the program.
Failure(Processing continuation). database access API value or the obtained value was
[File Name] [Function Name] illegal (replaceable).
[Error Code]
42203 FFQAMsgBox LangStr DB Access An error occurred when obtaining a character string Reinstall the program.
Failure(Processing continuation). database access API value (replaceable).
[File Name] [Function Name]
[Error Code]
42204 FFQAMsgBox LangMsgBox DB Access The return value for the message box database Reinstall the program.
Failure(Processing continuation). access API resulted in an error.
[File Name] [Function Name]
[Error Code]
42205 FFQAMsgBox FF32 Access Failure (Probably The return value for the FF32 library (FF32.dll) Reinstall the program.
acquisition of Registry goes resulted in an error.
wrong.)
[File Name] [Function Name] * When acquiring an optional key registry, no error will
[Error Code] be registered even if no key is available.
42206 FFQAMsgBox Tag Information Access No tag information was set up though it must have Use default information for processing. There is no
Failure(Processing continuation). been set up beforehand (replaceable). operational problem.
[File Name] [Function Name]
[Error Code]
42207 FFQAMsgBox NetConfig DB Access An error occurred when obtaining a network setup Reinstall the program.
Failure(Processing continuation). database value or obtained value was not correct
[File Name] [Function Name] (replaceable).
[Error Code]
42209 FFQAMsgBox FF32 Access Failure (Processing Failed in obtaining/setting an FF32 library value Reinstall the program.
continuation). (replaceable).
[File Name] [Function Name]
[Error Code]
42210 FFQAMsgBox Invalid function ID Number. An illegal function ID (disregard). There is no operational problem.
(Processing continuation).
[File Name] [Function Name]
[Error Code]
42211 FFQAMsgBox Data is not found in No custom setup database registered (processing can Register custom setup database using the
CustomScreenDB. be continued). customization setting displayed on the User Utility
[File Name] [Function Name] window.
[Error Code]

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-105
Appendix A CL Error Message Table Appx MT A-106
Event Event Source Description Causes Remedies Remarks
42212 FFQAMsgBox LogFile Access Failure. Failed in accessing the log file. Reinstall the program.
[File Name] [Function Name]
[Error Code]
42214 FFQAMsgBox The amount of adjustments is 0. The amount of position adjustment is set to 0 (zero). Manually adjust the positioning amount from the
[File Name] [Function Name] trimming dialog.
[Error Code]
42299 FFQAMsgBox Data resource access error. A clustering resource access error (processing can be Check network connection status.
[File Name] [Function Name] continued).
[Error Code]
43010 FFIIPInImgCtrl Can’t Get FontSize Information. The font size was not registered in the registry. Reinstall the IIP because the displayed characters
can be corrupted.
43010 FFQAManagerCom Can’t Get FontSize Information. The font size was not registered in the registry. Reinstall the IIP because the displayed characters
can be corrupted.
43020 FFIIPInImgCtrl Can’t Get Caption Information. The character string database did not exist or was Reinstall the IIP because the displayed characters
damaged. can be corrupted.
43060 FFQAManagerCom [Control: %1, The character string database did not exist or was Reinstall the IIP because the displayed characters
Function: %2 , Code: %3] damaged. can be corrupted.
43061 FFQAManagerCom [Control: %1, The character string database did not exist or was Reinstall the IIP because the displayed characters
Function: %2 , Code: %3] damaged. can be corrupted.
43062 FFQAManagerCom [Control: %1, The character string database did not exist or was Reinstall the IIP because the displayed characters
Function: %2 , Code: %3] damaged. can be corrupted.
43063 FFQAManagerCom [Control: %1, The character string database did not exist or was Reinstall the IIP because the displayed characters
Function: %2 , Code: %3] damaged. can be corrupted.
43064 FFQAManagerCom [Control: %1, The character string database did not exist or was Reinstall the IIP because the displayed characters
Function: %2 , Code: %3] damaged. can be corrupted.
43110 FFIIPInImgCtrl Can’t Access Local Configuration The language setup data was not obtained. Reinstall the IIP because the displayed characters
Data. can be corrupted.
43201 FFIIPQACtrl Focus Set Failure. The focus cannot be determined properly. There is no particular problem with operations.
(The focus cannot be determined properly because
the annotation character input dialog has been
inactivated.) After shutting the magnification function,
input of annotation characters becomes possible.
43301 FFQAManagerCom [Control: %1, The screen size was not obtained. Reinstall the IIP because the displayed characters
Function: %2 , Code: %3] can be corrupted.
43310 FFQAManagerCom [Control: %1, The language setup data was not obtained. Reinstall the IIP because the displayed characters
Function: %2 , Code: %3] can be corrupted.
44200 FFQAMsgBox Journal Proc Failure. The method return value for the log storage control Restart the system.
[File Name] [Function Name] resulted in an error.
[Error Code]

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-106
Appendix A CL Error Message Table Appx MT A-107
Event Event Source Description Causes Remedies Remarks
44201 FFQAMsgBox An unexpected Method call. An unexpected method call (called up at an Restart the system.
[File Name] [Function Name] impossible timing, being possible though to continue
[Error Code] processing).
44262 FFCustomMsgBox [44262] The maximum settable Automatic marker setting was attempted on an image Delete unnecessary markers so that there are 4 or QA section
number of automatic markers where the number of automatic markers allowed for less, and reperform the setting.
exceeded. one exposure menu was exceeded.
44263 FFCustomMsgBox [44263] Do you wish to delete The image was rotated/flipped with markers Press the [Yes] button to delete the markers so that QA section
markers and execute the determined on it. the image is rotated/flipped appropriately. Press the
operation? [No] button to rotate/flip the image without deleting the
markers.
44266 FFCustomMsgBox [44266] Markers are not being The setting of automatic markers was attempted on Press the [Yes] button to delete the already registered QA section
selected. an image with an exposure menu where automatic automatic markers. Press the [No] button not to make
markers are already-registered, though no markers any changes in the setting of the automatic markers.
have been determined on the same image.
44267 FFCustomMsgBox [44267] Automatic markers will be The setting of automatic markers was performed for Press the [Yes] button to determine image makers for QA section
registered. an exposure menu for which no automatic markers the exposure menu as the automatic markers. Press
have been determined. the [No] button not to perform the setting of automatic
markers.
44268 FFCustomMsgBox [44268] Automatic markers will be The setting of automatic markers was performed for Press the [Yes] button to delete already registered QA section
registered. an exposure menu for which automatic markers have automatic markers and determine image markers
already been determined. as the automatic markers. Press the [No] button not
to make any changes in the setting of the automatic
markers.
44269 FFCustomMsgBox [44269] Automatic markers cannot Automatic marker setting was performed on an image Perform automatic marker setting on images input QA section
be set up. retrieved from media. from the Image Reader.
44270 FFCustomMsgBox [44270] Automatic markers cannot Automatic marker setting was performed on an image Perform automatic marker setting on images input QA section
be set up. retrieved from external device. from the Image Reader.
44354 FFCustomMsgBox [44354] Invalid character has been The entered data was abnormal due, for instance, to Make a proper entry.
input in ID #. the inclusion of an unacceptable character.
44355 FFCustomMsgBox [44355] Invalid character has been The entered data was abnormal due, for instance, to Make a proper entry.
input in Study #. the inclusion of an unacceptable character.
44356 FFCustomMsgBox [44356] Invalid character has been The entered data was abnormal due, for instance, to Make a proper entry.
input in patient name. the inclusion of an unacceptable character.
44357 FFCustomMsgBox [44357] Invalid character has been The entered data was abnormal due, for instance, to Make a proper entry.
input in kanji-patient name. the inclusion of an unacceptable character.
44358 FFCustomMsgBox [44358] Invalid character has been The entered data was abnormal due, for instance, to Make a proper entry.
input in the sex (gender). the inclusion of an unacceptable character.
44359 FFCustomMsgBox [44359] Format of date of birth is The entry did not agree with the date format defined Make a proper entry.
not applicable. by system setup.
44360 FFCustomMsgBox [44360] The same study No. An attempt was made to enter an examination number Enter another number.
already exists. that was already used.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-107
Appendix A CL Error Message Table Appx MT A-108
Event Event Source Description Causes Remedies Remarks
44361 FFCustomMsgBox [44361] Anatomical region has not An anatomical region name was not entered. Make a proper entry.
been input.
44362 FFCustomMsgBox [44362] Invalid character has been The entered data was abnormal due, for instance, to Make a proper entry.
input in the anatomical region. the inclusion of an unacceptable character.
44363 FFCustomMsgBox [44363] Invalid character has The entered data was abnormal due, for instance, to Make a proper entry.
been input in the kanji-anatomical the inclusion of an unacceptable character.
region.
44364 FFCustomMsgBox [44364] No menu name has been A menu name was not entered. Make a proper entry.
input.
44365 FFCustomMsgBox [44365] Invalid character has been The entered data was abnormal due, for instance, to Make a proper entry.
input in the menu name. the inclusion of an unacceptable character.
44366 FFCustomMsgBox [44366] Invalid character has been The entered data was abnormal due, for instance, to Make a proper entry.
input in the kanji-menu name. the inclusion of an unacceptable character.
44367 FFCustomMsgBox [44367] Invalid character has The entered data was abnormal due, for instance, to Make a proper entry.
been input in the film annotation the inclusion of an unacceptable character.
characters.
44368 FFCustomMsgBox [44368] No patient information has The patient information was not entered. Make a proper entry.
been input.
44369 FFCustomMsgBox [44369] The Study ID contained The entered data was abnormal due, for instance, to Make a proper entry.
an invalid character. the inclusion of an unacceptable character.
44392 FFCustomMsgBox [44392] The maximum number of The 5th View Modifier was selected. Select View Modifiers so that the total number is 4 or QA section
View Modifiers settable exceeded. less.
44393 FFCustomMsgBox [44393] View modifier code It is not allowed to set up view code modifier for an Change system configuration of the exposure QA section
sequence items cannot be image with no view code information. menu so that view code information can be set up
changed. appropriately and then re-input an image.
44394 FFCustomMsgBox [44394] Information that System configuration of the view code modifier set up  Press [OK] to cancel inconsistent information and to QA section
contradicts with the system for the image was changed. display the view code modifier change window.
configuration exists in the View  Press [Cancel] not to change the view code modifier.
Modifier Code Sequences
specified on images.
44551 FFCustomMsgBox [44551] Film format will be This window opens for confirmation only.
changed.
44603 FFCustomMsgBox [44603] Failed in automatic An error occurred while in automatic image stitching Check order and orientation of images. QA section
linkage of stitching images. processing.
44604 FFCustomMsgBox [44604] Automatic stitching will The automatic image stitching button was pressed.  Press [OK] to perform automatic image stitching QA section
be performed and the data will be processing. When doing so, results of fine adjustment
stored. processing will be discarded.
 Press [Cancel] to return to the current dialog box.
44732 FFCustomMsgBox [32042] Failed in calculating EI or • The input parameter (DDO file) is invalid. • Reperform exposure.
DI. • The ExposureIndex.prm file is illegal • Correct the ExposureIndex.prm file.
(reading error or correction error).

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-108
Appendix A CL Error Message Table Appx MT A-109
Event Event Source Description Causes Remedies Remarks
49200 FFQAMsgBox FF32 Error. The return value for the FF32 library (FF32.dll) Restart the system.
[File Name] [Function Name] resulted in an error (irreplaceable).
[Error Code]
49201 FFQAMsgBox Method Argument Error. A method argument type error (for instance, there Restart the system.
[File Name] [Function Name] were no objects).
[Error Code]
49202 FFQAMsgBox Can’t get Tag Information. No tag information was set up though it must have Restart the system.
[File Name] [Function Name] been set up beforehand (irreplaceable).
[Error Code]
49203 FFQAMsgBox Memory or Resource cannot be Failed in acquiring memory/handle resources. Restart the system.
gained.
[File Name] [Function Name]
[Error Code]
49204 FFQAMsgBox Windows API error occurred. Windows API return value resulted in an error. Restart the system.
[File Name] [Function Name]
[Error Code]
49298 FFQAMsgBox Secondary detection code Error. An error occurred with the return value of the Restart the system.
[File Name] [Function Name] secondary detection code.
[Error Code]
49299 FFQAMsgBox Exception Error occurred. An exceptional error (an error detected with Try/ Restart the system.
[File Name] [Function Name] Catch, OnErrorGoto).
[Error Code]
50000 FFFinpSend Memory Error.%n%1 The system was abnormal (memory allocation was Restart.
not accomplished).
50000 FFOutImgPrc Initialize Error.%n%1 An error occurred during initialization processing. Restart. If the same symptom frequently occurs,
perform a reinstallation and then initialize the image
database.
50000 FFOutImgPrc2 Initialize Error.%n%1 An error occurred during initialization processing. Restart. If the same symptom frequently occurs,
perform a reinstallation and then initialize the image
database.
50001 FFCustomMsgBox [50001] Failed in initialization • Output option setup was not completed. • Perform output option setup.
process. • The system was unstable. • Restart. If the same symptom recurs, perform a
reinstallation.
50001 FFFinpSend Dicom Data Object Load The DicomDataObject file for output was not found. Perform a reinstallation.
Error.%n%1
50001 FFIIPOUTPUT Initialize Error.%n[%1] Initialization process error. Restart. If the same symptom frequently occurs,
perform a reinstallation.
• Output control was not exercised.
• The error check method was not successfully called.
• A certain other program error occurred.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-109
Appendix A CL Error Message Table Appx MT A-110
Event Event Source Description Causes Remedies Remarks
50001 FFOutImgPrc DB Connect Error.%n%1 An abnormality occurred in the connection to a Check whether the SQL service manager is normally
database. operating. If the same symptom occurs while the
SQL service manager is normally operating, initialize
the image database (the entire image data is then
deleted).
50001 Spooler Initialize Error.%n[%1] Initialization process error. Restart. If the same symptom frequently occurs, Output section container.
perform a reinstallation.
• No output control was exercised.
• An error check method call was unsuccessful.
• Other program error.
50001 FFOutImgPrc2 DB Connect Error.%n%1 An abnormality occurred in the connection to a Check whether the SQL service manager is normally
database. operating. If the same symptom occurs while the
SQL service manager is normally operating, initialize
the image database (the entire image data is then
deleted).
50002 FFCustomMsgBox [50002] Failed in output process. The system was unstable. Restart. If the same symptom recurs after a restart,
perform a reinstallation.
50002 FFFinpSend File Open Error.%n%1 There is no output raw data file. Reinstall.
50002 FFIIPOUTPUT State Change State transition notification process error. Restart.
Error.%n[%1]
• The output destination was not successfully
reregistered.
• The state transition notification call was not
successful.
• An unknown program error occurred.
50002 FFOutImgPrc DB Information Error.%n%1 The database information was abnormal. Restart. If the same symptom frequently occurs,
perform a reinstallation and then initialize the image
database.
50002 Spooler State Change Error.%n[%1] State change notification process error. Restart. Output section container.
• An output destination was not successfully
registered.
• A state change notification call was not successful.
• Other program error.
• Line establishment message transmission error [not
used].
• Line abnormality message transmission error [not
used].
50002 FFOutImgPrc2 DB Information Error.%n%1 The database information was abnormal. Restart. If the same symptom frequently occurs,
perform a reinstallation and then initialize the image
database.
50003 FFCustomMsgBox [50003] Failed in output process. The system was unstable. Restart. If the same symptom recurs after a restart,
perform a reinstallation.
50003 FFFinpSend File Read Error.%n%1 The output raw data file is abnormal. Reinstall.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-110
Appendix A CL Error Message Table Appx MT A-111
Event Event Source Description Causes Remedies Remarks
50003 FFIIPOUTPUT Routine Change Error.%n[%1] Routine change process error. Restart.

• The resumption request was not successfully made.

50003 FFOutImgPrc System Error.%n%1 The system was abnormal. Restart. If the same symptom frequently occurs,
perform a reinstallation and then initialize the image
database.
50003 Spooler Routine Change Error.%n[%1] Routine change process error. Restart. Output section container.
• A resumption request was not successfully made.
50003 FFOutImgPrc2 System Error.%n%1 The system was abnormal. Restart. If the same symptom frequently occurs,
perform a reinstallation and then initialize the image
database.
50004 FFCustomMsgBox [50004] Failed in output process. - An exposure menu name with an apostrophe was - Upgrade the software to version A08 or later.
used with software version A07 or earlier. - Restart. If the same symptom recurs, perform a
- The system was unstable. reinstallation.
50004 FFFinpSend FinpSend Error.%n%1 An abnormality occurred in the output sequence. Restart. If the same symptom frequently occurs,
perform a reinstallation and then initialize the image
database.
50004 FFIIPOUTPUT Spool Error.%n[%1] Spool process error. Restart.
• The spool request call was not successfully made.
• The reoutput request was not successfully made.
• The study termination notification was not
successfully made.
• The spool request response status was invalid.
• An unknown program error occurred.
50004 FFOutImgPrc I/F Timing Error.%n%1 An interface abnormality was encountered. Restart.
50004 Spooler Spool Error.%n[%1] Spool process error. Restart. Output section container.
• A spool request call was not successfully made.
• A reoutput request was not successfully made.
• An examination end notification was not successful.
• The spool request response state was illegal.
• Other program error.
50004 FFOutImgPrc2 I/F Timing Error.%n%1 An interface abnormality was encountered. Restart.
50005 FFCustomMsgBox [50005] Failed in output process. The system was unstable. Restart. If the same symptom recurs after a restart,
perform a reinstallation.
50005 FFIIPOUTPUT ExeOutput Error.%n[%1] Forced-output process error. Restart.
• The spool forced output request call was not
successfully made.
• The queue forced output response message was
not successfully transmitted.
• An unknown program error occurred.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-111
Appendix A CL Error Message Table Appx MT A-112
Event Event Source Description Causes Remedies Remarks
50005 FFOutImgPrc CreateFileMapping Error.%n%1 File mapping was unachievable. Restart.
50005 Spooler ExeOutput Error.%n[%1] Forced output process error. Restart. Output section container.
• A spool forced output request was not successfully
called.
• A queue forced output response message was not
successfully transmitted.
• Other program error.
50005 FFOutImgPrc2 CreateFileMapping Error.%n%1 File mapping was unachievable. Restart.
50006 FFCustomMsgBox [50006] Failed in output process. The system was unstable. Restart. If the same symptom recurs after a restart,
perform a reinstallation.
50006 FFIIPOUTPUT Image Proc Error.%n[%1] Image processing error. Restart.
• The image processing request call was not
successfully made.
• The image processing setup completion call was not
successfully made.
• The image processing completion notification call
was not successfully made.
• The image processing job acquisition request was
not successfully made.
• An unknown program error occurred.
50006 FFOutImgPrc File Open Error.%n%1 The file could not be opened. Check the file.
50006 FFOutImgPrc2 File Open Error.%n%1 The file could not be opened. Check the file.
50007 FFCustomMsgBox [50007] Failed in terminating The system was unstable. Restart. If the same symptom recurs after a restart,
process. perform a reinstallation.
50007 FFIIPOUTPUT Output Proc Error.%n[%1] Output processing error. Restart.
• The output destination information was not
successfully acquired.
• The output request call was not successfully made.
• The output completion notification was not
successfully made.
• An unknown program error occurred.
50007 FFOutImgPrc File Read/Write Error.%n%1 A file write/read was unsuccessful. If the problem frequently occurs, replace the disk or
The problem is attributable to a disk. take some other remedial action.
50007 Spooler Terminate Error.%n[%1] Termination process error. Restart. Output section container.

• Other program error.

50007 FFOutImgPrc2 File Read/Write Error.%n%1 A file write/read was unsuccessful. If the problem frequently occurs, replace the disk or
The problem is attributable to a disk. take some other remedial action.
50008 FFCustomMsgBox [50008] Failed in image processing The system was unstable. Restart. If the same symptom recurs after a restart,
for output. perform a reinstallation.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-112
Appendix A CL Error Message Table Appx MT A-113
Event Event Source Description Causes Remedies Remarks
50008 FFIIPOUTPUT Commit Proc Error.%n[%1] Commitment processing error. Restart.
• The commitment destination information was not
successfully acquired.
• The commitment request call was not successfully
made.
• The commitment completion notification was not
successfully made.
• An unknown program error occurred.
50008 FFOutImgPrc CreateDispatch Error.%n%1 The control was not successfully initialized. Check that the control is registered.
50008 Spooler Image Proc Error.%n[%1] Image process error. Restart. Output section container.
• An image process request was not successfully
called.
• An image process setup completion call was not
successfully made.
• An image process completion notification was not
successfully called.
• An image process job acquisition request was not
successfully issued.
• Other program error.
50008 FFOutImgPrc2 CreateDispatch Error.%n%1 The control was not successfully initialized. Check that the control is registered.
50009 FFCustomMsgBox [50009] Failed in output process. The system was unstable. Restart. If the same symptom recurs after a restart,
perform a reinstallation.
50009 FFIIPOUTPUT Queue Resume Error.%n[%1] Queue resumption process error. Restart.
• The queue resumption request call was not
successfully made.
• The queue resumption response message was not
successfully transmitted.
• An unknown program error occurred.
50009 FFOutImgPrc Memory Get Error.%n%1 The system was abnormal (memory allocation was Restart.
not achieved).
50009 Spooler Output Proc Error.%n[%1] Output process error. Restart. Output section container.
• Output destination information was not successfully
acquired.
• An output request was not successfully called.
• An output completion notification was not successful.
• Other program error.
50009 FFOutImgPrc2 Memory Get Error.%n%1 The system was abnormal (memory allocation was Restart.
not achieved).

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-113
Appendix A CL Error Message Table Appx MT A-114
Event Event Source Description Causes Remedies Remarks
50010 FFIIPOUTPUT Queue Delete Queue deletion process error. Restart.
Error.%n[%1]
• The queue deletion request was not successfully
made.
• The queue deletion response message was not
successfully transmitted.
• An unknown program error occurred.
50010 FFOutImgPrc Memory(DDO) Get Error.%n%1 The system was abnormal (memory allocation was Restart.
not achieved).
50010 Spooler Queue Resume Error.%n[%1] Queue resumption process error. Restart. Output section container.
• A queue resumption request was not successfully
called.
• A queue resumption response message was not
successfully transmitted.
• Other program error.
50010 FFOutImgPrc2 Memory(DDO) Get Error.%n%1 The system was abnormal (memory allocation was Restart.
not achieved).
50011 FFIIPOUTPUT Unit Suspend Equipment output suspension process error. Restart.
Error.%n[%1]
• The equipment output suspension request call was
not successfully made.
• The equipment output suspension response
message was not successfully transmitted.
• An unknown program error occurred.
50011 FFOutImgPrc Memory(VR) Get Error.%n%1 The system was abnormal (memory allocation was Restart.
not achieved).
50011 Spooler Queue Delete Queue deletion process error. Restart. Output section container.
Error.%n[%1]
• A queue deletion request was not successfully
issued.
• A queue deletion response message was not
successfully transmitted.
• Other program error.
50011 FFOutImgPrc2 Memory(VR) Get Error.%n%1 The system was abnormal (memory allocation was Restart.
not achieved).
50012 FFIIPOUTPUT Unit Resume Error.%n[%1] Equipment output resumption error. Restart.
• The equipment output resumption request call was
not successfully made.
• The equipment output resumption response
message was not successfully transmitted.
• An unknown program error occurred.
50012 FFOutImgPrc Dicom Data Object Error.%n%1 Dicom Data Object was abnormal. Restart. If the same symptom frequently occurs,
perform a reinstallation and then initialize the image
database.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-114
Appendix A CL Error Message Table Appx MT A-115
Event Event Source Description Causes Remedies Remarks
50012 Spooler Unit Suspend Error.%n[%1] Unit output suspension process error. Restart. Output section container.
• A unit output suspension request was not
successfully called.
• A unit output suspension response message was
not successfully transmitted.
• Other program error.
50012 FFOutImgPrc2 Dicom Data Object Error.%n%1 Dicom Data Object was abnormal. Restart. If the same symptom frequently occurs,
perform a reinstallation and then initialize the image
database.
50013 FFOutImgPrc Dicom Data Object No Data.%n%1 Dicom Data Object did not contain any data. Restart. If the same symptom frequently occurs,
perform a reinstallation and then initialize the image
database.
50013 Spooler Unit Resume Error.%n[%1] Unit output resumption process error. Restart. Output section container.
• A unit output resumption request was not
successfully called.
• A unit output resumption response message was not
successfully transmitted.
• Other program error.
50013 FFOutImgPrc2 Dicom Data Object No Data.%n%1 Dicom Data Object did not contain any data. Restart. If the same symptom frequently occurs,
perform a reinstallation and then initialize the image
database.
50015 FFIIPOUTPUT Terminate Error.%n[%1] Termination process error. Restart.

• An unknown program error occurred.

50020 FFOutImgPrc Data Error.%n%1 A data abnormality was encountered. Restart. If the same symptom frequently occurs,
perform a reinstallation and then initialize the image
database.
50020 FFOutImgPrc2 Data Error.%n%1 A data abnormality was encountered. Restart. If the same symptom frequently occurs,
perform a reinstallation and then initialize the image
database.
50021 FFOutImgPrc Output Job DB Error.%n%1 The output database was abnormal. Restart. If the same symptom frequently occurs,
perform a reinstallation and then initialize the image
database.
50021 FFOutImgPrc2 Output Job DB Error.%n%1 The output database was abnormal. Restart. If the same symptom frequently occurs,
perform a reinstallation and then initialize the image
database.
50022 FFOutImgPrc Memory Over.%n%1 A memory area abnormality was encountered. Restart.
50022 FFOutImgPrc2 Memory Over.%n%1 A memory area abnormality was encountered. Restart.
50030 FFOutImgPrc OutImgPrc Error.%n%1 An abnormality occurred. Restart.
50030 FFOutImgPrc2 OutImgPrc Error.%n%1 An abnormality occurred. Restart.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-115
Appendix A CL Error Message Table Appx MT A-116
Event Event Source Description Causes Remedies Remarks
50100 FFOutImgPrc IFormatCom Error.%n%1 The format calculation object was abnormal. Restart. If the same symptom frequently occurs,
perform a reinstallation and then initialize the image
database.
50100 Spooler Spooler Error.%n%1 Common error message. Restart. If the same symptom frequently occurs, Spooler
perform a reinstallation and then initialize the image
• Queue information class related message.
database.
An output job file was not successfully accessed.
Output job information was not successfully
accessed.
Film information was not successfully acquired.
Information was not successfully acquired.
The job status was not successfully acquired
(program error).
Job information was not successfully freed.
• Unit information class related message. Unit
information was not successfully freed.
• Spooler class related message.
The film count was not successfully checked.
The image count/image information area was not
successfully acquired.
Unit information was not successfully acquired.
• Other program error
50100 FFOutImgPrc2 IFormatCom Error.%n%1 The format calculation object was abnormal. Restart. If the same symptom frequently occurs,
perform a reinstallation and then initialize the image
database.
50101 FFOutImgPrc IRawMakeCom Error.%n%1 The raw data creation object was abnormal. Restart. If the same symptom frequently occurs,
perform a reinstallation and then initialize the image
database.
50101 Spooler RunProc Error.%n%1 Initialization process error. Restart. If the same symptom frequently occurs, Spooler
perform a reinstallation and then initialize the image
• The spooler control state was abnormal.
database.
• A spool start process was in error.
• A database connection was not successfully closed.
• Other program error.
50101 FFOutImgPrc2 IRawMakeCom Error.%n%1 The raw data creation object was abnormal. Restart. If the same symptom frequently occurs,
perform a reinstallation and then initialize the image
database.
50102 FFOutImgPrc FFNetDB Error.%n%1 An abnormality occurred at the time of network setup Restart. If the same symptom frequently occurs,
data acquisition. perform a reinstallation.
(It is conceivable that the network setup database
was abnormal.)

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-116
Appendix A CL Error Message Table Appx MT A-117
Event Event Source Description Causes Remedies Remarks
50102 Spooler OutputRegisterProc Error.%n%1 Output destination registration process error. Restart. If the same symptom frequently occurs, Spooler
perform a reinstallation and then initialize the image
• The spooler control state was abnormal.
database.
• An illegal parameter was encountered.
• An output destination registration request message
was not successfully issued.
• An output destination was not successfully
registered.
• Other program error.
50102 FFOutImgPrc2 FFNetDB Error.%n%1 An abnormality occurred at the time of network setup Restart. If the same symptom frequently occurs,
data acquisition. perform a reinstallation.
(It is conceivable that the network setup database
was abnormal.)
50103 FFOutImgPrc ImgJpegCtrl Error.%n%1 The decompression object was abnormal. Restart. If the same symptom frequently occurs,
perform a reinstallation and then initialize the image
database.
50103 Spooler StateChangeProc Error.%n%1 Local printer/Dicom printer state change notification Restart. If the same symptom frequently occurs, Spooler
process error. perform a reinstallation and then initialize the image
database.
• The spooler control state was abnormal.
• An illegal parameter was encountered.
• A printer state change notification message was not
successfully issued.
• The unit status was not successfully acquired.
• Other program error.
50103 FFOutImgPrc2 ImgJpegCtrl Error.%n%1 The decompression object was abnormal. Restart. If the same symptom frequently occurs,
perform a reinstallation and then initialize the image
database.
50104 FFOutImgPrc IFMImgSkGpCtrl Error.%n%1 The normalization process object was abnormal. Restart. If the same symptom frequently occurs,
perform a reinstallation and then initialize the image
database.
50104 Spooler ErrorCheckProc Error.%n%1 Data integrity check process error. Restart. If the same symptom frequently occurs, Spooler
perform a reinstallation and then initialize the image
• The spooler control state was abnormal.
database.
• A data integrity check request message was not
successfully issued.
• Other program error.
50104 FFOutImgPrc2 IFMImgSkGpCtrl Error.%n%1 The normalization process object was abnormal. Restart. If the same symptom frequently occurs,
perform a reinstallation and then initialize the image
database.
50105 FFOutImgPrc IFMImgVRSCtrl Error.%n%1 The zoom object (VRS method) was abnormal. Restart. If the same symptom frequently occurs,
perform a reinstallation and then initialize the image
database.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-117
Appendix A CL Error Message Table Appx MT A-118
Event Event Source Description Causes Remedies Remarks
50105 Spooler RestoreJob Error.%n%1 Job restoration error. Restart. If the same symptom frequently occurs, Spooler
perform a reinstallation and then initialize the image
• The spooler control state was abnormal.
database.
• An unprocessed job restoration request message
was not successfully issued.
• Other program error.
50105 FFOutImgPrc2 IFMImgVRSCtrl Error.%n%1 The zoom object (VRS method) was abnormal. Restart. If the same symptom frequently occurs,
perform a reinstallation and then initialize the image
database.
50106 FFOutImgPrc IRotateCom Error.%n%1 The rotation object was abnormal. Restart. If the same symptom frequently occurs,
perform a reinstallation and then initialize the image
database.
50106 Spooler SpoolProc Error.%n%1 Spool process error. Restart. If the same symptom frequently occurs, Spooler
perform a reinstallation and then initialize the image
• The spooler control state was abnormal.
database.
• A parameter error occurred.
• A spool request message was not successfully
issued.
• DDO file information was not successfully acquired.
• Other program error.
50106 FFOutImgPrc2 IRotateCom Error.%n%1 The rotation object was abnormal. Restart. If the same symptom frequently occurs,
perform a reinstallation and then initialize the image
database.
50107 FFOutImgPrc IFMImgParamCtrl Error.%n%1 The image process management parameter object Restart. If the same symptom frequently occurs,
was abnormal. perform a reinstallation and then initialize the image
database.
50107 Spooler ReoutputProc Error.%n%1 Reoutput start process error. Restart. If the same symptom frequently occurs, Spooler
perform a reinstallation and then initialize the image
• The spooler control state was abnormal.
database.
• An illegal parameter was encountered.
• A reoutput start message was not successfully
issued.
• Other program error.
50107 FFOutImgPrc2 IFMImgParamCtrl Error.%n%1 The image process management parameter object Restart. If the same symptom frequently occurs,
was abnormal. perform a reinstallation and then initialize the image
database.
50108 FFOutImgPrc IFMImgHandCtrl Error.%n%1 The CR image process object was abnormal. Restart. If the same symptom frequently occurs,
perform a reinstallation and then initialize the image
database.
50108 Spooler StudyReqEndProc Error.%n%1 Study termination request processing error. Restart. If the same symptom frequently occurs, Spooler
perform a reinstallation and then initialize the image
• Spooler control status error.
database.
• Illegal parameters.
• Failed in issuing study termination request message.
• Other program errors.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-118
Appendix A CL Error Message Table Appx MT A-119
Event Event Source Description Causes Remedies Remarks
50108 FFOutImgPrc2 IFMImgHandCtrl Error.%n%1 The CR image process object was abnormal. Restart. If the same symptom frequently occurs,
perform a reinstallation and then initialize the image
database.
50109 FFOutImgPrc IFMImgFCmpCtrl Error.%n%1 FCR compression (compression/decompression (Fuji’ Restart. If the same symptom frequently occurs,
s unique method)) was abnormal. perform a reinstallation and then initialize the image
database.
50109 Spooler ExeOutputJob Error.%n%1 Forced output request process error. Restart. If the same symptom frequently occurs, Spooler
perform a reinstallation and then initialize the image
• The spooler control state was abnormal.
database.
• An illegal parameter was encountered.
• A forced output request message was not
successfully issued.
• The requested output image data did not exist.
• Other program error.
50109 FFOutImgPrc2 IFMImgFCmpCtrl Error.%n%1 FCR compression (compression/decompression (Fuji’ Restart. If the same symptom frequently occurs,
s unique method)) was abnormal. perform a reinstallation and then initialize the image
database.
50110 FFOutImgPrc IDataToPrintCom Error.%n%1 Data conversion (for DICOM) was abnormal. Restart. If the same symptom frequently occurs,
perform a reinstallation and then initialize the image
database.
50110 Spooler GetImageProcJob Error.%n%1 Image processing job acquisition process error. Restart. If the same symptom frequently occurs, Spooler
perform a reinstallation and then initialize the image
• The spooler control state was abnormal.
database.
• An image processing job acquisition request
message was not successfully issued.
• Data was not databased.
• Other program error.
50110 FFOutImgPrc2 IDataToPrintCom Error.%n%1 Data conversion (for DICOM) was abnormal. Restart. If the same symptom frequently occurs,
perform a reinstallation and then initialize the image
database.
50111 FFOutImgPrc IDataToStorageCom Error.%n%1 Data conversion (for DICOM Storage) was abnormal. Restart. If the same symptom frequently occurs,
perform a reinstallation and then initialize the image
database.
50111 Spooler SetImageProcComplete Image processing completion notification process Restart. If the same symptom frequently occurs, Spooler
Error.%n%1 error. perform a reinstallation and then initialize the image
database.
• The spooler control state was abnormal.
• An illegal parameter was encountered.
• An image processing completion notification
message was not successfully issued.
• Other program error.
50111 FFOutImgPrc2 IDataToStorageCom Error.%n%1 Data conversion (for DICOM Storage) was abnormal. Restart. If the same symptom frequently occurs,
perform a reinstallation and then initialize the image
database.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-119
Appendix A CL Error Message Table Appx MT A-120
Event Event Source Description Causes Remedies Remarks
50112 FFOutImgPrc IFMImgMoireCtrl Error.%n%1 Moire elimination was abnormal. Restart. If the same symptom frequently occurs,
perform a reinstallation and then initialize the image
database.
50112 FFQCMsgBox Custom DB Access Error. [File Access error to ReaderQC.mdb. Restart.
Name]
[Function Name]
[50112]
50112 Spooler GetOutputProcJob Error.%n%1 Output job acquisition response process error. Restart. If the same symptom frequently occurs, Spooler
perform a reinstallation and then initialize the image
• The spooler control state was abnormal.
database.
• An output job acquisition response message was
not successfully issued.
• Data was not databased.
• Other program error.
50112 FFOutImgPrc2 IFMImgMoireCtrl Error.%n%1 Moire elimination was abnormal. Restart. If the same symptom frequently occurs,
perform a reinstallation and then initialize the image
database.
50113 FFOutImgPrc IFilmCharMakeCom Error.%n%1 The film annotation character generation object was Restart. If the same symptom frequently occurs,
abnormal. perform a reinstallation and then initialize the image
database.
50113 Spooler SetOutputProcComplete Output completion notification process error. Restart. If the same symptom frequently occurs, Spooler
Error.%n%1 perform a reinstallation and then initialize the image
• The spooler control state was abnormal.
database.
• An illegal parameter was encountered.
• An output completion notification message was not
successfully issued.
• Data was not databased.
• Other program error.
50113 FFOutImgPrc2 IFilmCharMakeCom Error.%n%1 The film annotation character generation object was Restart. If the same symptom frequently occurs,
abnormal. perform a reinstallation and then initialize the image
database.
50114 FFOutImgPrc MaskProcExec Error.%n%1 The blackening process was abnormal. Restart. If the same symptom frequently occurs,
perform a reinstallation and then initialize the image
database.
50114 Spooler GetCommitProcJob Error.%n%1 Commitment job acquisition response process error. Restart. If the same symptom frequently occurs,
perform a reinstallation and then initialize the image
• The spooler control status was abnormal.
database.
• The commitment jog acquisition response message
was not successfully issued.
• The data was not found in the database.
• An unknown program error occurred.
50114 FFOutImgPrc2 MaskProcExec Error.%n%1 The blackening process was abnormal. Restart. If the same symptom frequently occurs, Output image process
perform a reinstallation and then initialize the image control
database.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-120
Appendix A CL Error Message Table Appx MT A-121
Event Event Source Description Causes Remedies Remarks
50115 FFOutImgPrc RecognizeProcExec Error.%n%1 The blackening automatic recognition process was Restart. If the same symptom frequently occurs,
abnormal. perform a reinstallation and then initialize the image
database.
50115 Spooler QueueResume Error.%n%1 Queue output resumption request process error. Restart. If the same symptom frequently occurs, Spooler
perform a reinstallation and then initialize the image
• The spooler control state was abnormal.
database.
• An illegal parameter was encountered.
• A queue output resumption request message was
not successfully issued.
• Other program error.
50115 Spooler SetCommitProcComplete Commitment completion notification process error. Restart. If the same symptom frequently occurs,
Error.%n%1 perform a reinstallation and then initialize the image
• The spooler control status was abnormal.
database.
• An illegal parameter was encountered.
• The commitment completion notification message
was not successfully issued.
• The queue was not found.
• The data was not found in the database.
• An unknown program error occurred.
50115 FFOutImgPrc2 RecognizeProcExec Error.%n%1 The blackening automatic recognition process was Restart. If the same symptom frequently occurs, Output image process
abnormal. perform a reinstallation and then initialize the image control
database.
50116 FFOutImgPrc ExecMarker Error.%n%1 The marker imbedding process was abnormal. Restart. If the same symptom frequently occurs,
perform a reinstallation and then initialize the image
database.
50116 Spooler QueueDelete Error.%n%1 Queue deletion request process error. Restart. If the same symptom frequently occurs, Spooler
perform a reinstallation and then initialize the image
• The spooler control state was abnormal.
database.
• An illegal parameter was encountered.
• A queue deletion request message was not
successfully issued.
• Output job file information was not successfully
accessed.
• Queue deletion was not successful.
• Database access was not successful.
• Other program error.
50116 FFOutImgPrc2 ExecMarker Error.%n%1 The marker imbedding process was abnormal. Restart. If the same symptom frequently occurs,
perform a reinstallation and then initialize the image
database.
50117 FFOutImgPrc ExecMarker Warning.%n%1 Information for software development personnel. There is no problem with operations.
50117 FFOutImgPrc LUTProcExec Error.%n% An error occurred in a display gradation correction Restart. If the same symptom frequently occurs,
process. perform a reinstallation and then initialize the image
database.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-121
Appendix A CL Error Message Table Appx MT A-122
Event Event Source Description Causes Remedies Remarks
50117 Spooler QueueResume Error.%n%1 Queue output resumption request process error. Restart. If the same symptom frequently occurs,
perform a reinstallation and then initialize the image
• The spooler control status was abnormal.
database.
• An illegal parameter was encountered.
• The queue output resumption request message was
not successfully issued.
• An unknown program error occurred.
50117 Spooler UnitSuspend Error.%n%1 Unit suspension request process error. Restart. If the same symptom frequently occurs, Spooler
perform a reinstallation and then initialize the image
• The spooler control state was abnormal.
database.
• An illegal parameter was encountered.
• A unit suspension request message was not
successfully issued.
• Other program error.
50117 FFOutImgPrc2 LUTProcExec Error.%n% An error occurred in a display gradation correction Restart. If the same symptom frequently occurs,
process. perform a reinstallation and then initialize the image
database.
50118 FFOutImgPrc ExecMarker Information.%n%1 Information for software development personnel. There is no problem with operations.
50118 FFOutImgPrc MPMCode Error.%n%1 An error occurred in an output information conversion Restart. If the same symptom frequently occurs,
process. perform a reinstallation and then initialize the image
database.
50118 Spooler QueueDelete Error.%n%1 Queue deletion request process error. Restart. If the same symptom frequently occurs,
perform a reinstallation and then initialize the image
• The spooler control status was abnormal.
database.
• An illegal parameter was encountered.
• Failed in issuing a queue deletion request message.
• Failed in accessing the output job file information.
• Failed in deleting the queue.
• Failed in accessing the database.
• An unknown program error occurred.
50118 Spooler UnitResume Error.%n%1 Unit resumption request process error. Restart. If the same symptom frequently occurs, Spooler
perform a reinstallation and then initialize the image
• The spooler control state was abnormal.
database.
• An illegal parameter was encountered.
• A unit resumption request message was not
successfully issued.
• Other program error.
50118 FFOutImgPrc2 MPMCode Error.%n%1 An error occurred in an output information conversion Restart. If the same symptom frequently occurs,
process. perform a reinstallation and then initialize the image
database.
50119 Spooler SuspendProc Error.%n%1 Suspension request process error. Restart. If the same symptom frequently occurs, Spooler
perform a reinstallation and then initialize the image
• The spooler control state was abnormal.
database.
• A suspension request message was not successfully
issued.
• Other program error.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-122
Appendix A CL Error Message Table Appx MT A-123
Event Event Source Description Causes Remedies Remarks
50119 Spooler UnitSuspend Error.%n%1 Equipment suspension request process error. Restart. If the same symptom frequently occurs,
perform a reinstallation and then initialize the image
• The spooler control status was abnormal.
database.
• An illegal parameter was encountered.
• The equipment suspension request message was
not successfully issued.
• An unknown program error occurred.
50119 FFOutlmgPrc Trimming Error.%n%1 An error occurred while in trimming processing. Restart. If the same symptom frequently occurs,
perform a reinstallation and then initialize the image
database.
50119 FFOutlmgPrc2 Trimming Error.%n%1 An error occurred while in trimming processing. Restart. If the same symptom frequently occurs,
perform a reinstallation and then initialize the image
database.
50120 Spooler ResumeProc Error.%n%1 Resumption request process error. Restart. If the same symptom frequently occurs, Spooler
perform a reinstallation and then initialize the image
• The spooler control state was abnormal.
database.
• A resumption request message was not successfully
issued.
• Other program error.
50120 Spooler UnitResume Error.%n%1 Equipment resumption request process error. Restart. If the same symptom frequently occurs,
perform a reinstallation and then initialize the image
• The spooler control status was abnormal.
database.
• An illegal parameter was encountered.
• The equipment resumption request message was
not successfully issued.
• An unknown program error occurred.
50120 FFOutlmgPrc AnnotationProc Error.%n%1 An error occurred while in annotation information Restart. If the same symptom frequently occurs,
embedding processing. perform a reinstallation and then initialize the image
database.
50120 FFOutlmgPrc2 AnnotationProc Error.%n%1 An error occurred while in annotation information Restart. If the same symptom frequently occurs,
embedding processing. perform a reinstallation and then initialize the image
database.
50121 Spooler EndProc Error.%n%1 End request process error. Restart. If the same symptom frequently occurs, Spooler
perform a reinstallation and then initialize the image
• The spooler control state was abnormal.
database.
• An end request message was not successfully
issued.
• Other program error.
50121 Spooler SuspendProc Error.%n%1 Suspension request process error. Restart. If the same symptom frequently occurs,
perform a reinstallation and then initialize the image
• The spooler control status was abnormal.
database.
• The suspension request message was not
successfully issued.
• An unknown program error occurred.
50121 FFOutlmgPrc FNCProc Error.%n%1 An error occurred during FNC processing. Restart. If the same symptom recurs, perform
reinstallation and initialize the image database.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-123
Appendix A CL Error Message Table Appx MT A-124
Event Event Source Description Causes Remedies Remarks
50121 FFOutlmgPrc2 FNCProc Error.%n%1 An error occurred during FNC processing. Restart. If the same symptom recurs, perform
reinstallation and initialize the image database.
50122 Spooler ResumeProc Error.%n%1 Resumption request process error. Restart. If the same symptom frequently occurs,
perform a reinstallation and then initialize the image
• The spooler control status was abnormal.
database.
• The resumption request message was not
successfully issued.
• An unknown program error occurred.
50122 FFOutlmgPrc MaskProcExec Warning.%n%1 Sk and Gp values do not exist for Auto blackening Although there is no problem with operations, check
process. the data appropriately.
50122 FFOutlmgPrc2 MaskProcExec Warning.%n%1 Sk and Gp values do not exist for Auto blackening Although there is no problem with operations, check
process. the data appropriately.
50123 Spooler EndProc Error.%n%1 Termination request process error. Restart. If the same symptom frequently occurs,
perform a reinstallation and then initialize the image
• The spooler control status was abnormal.
database.
• The termination request message was not
successfully issued.
• An unknown program error occurred.
50123 FFOutlmgPrc IIPHand Error.%n%1 Processing of output image failed. Restart. If the same symptom frequently occurs,
perform a reinstallation and then initialize the image
database.
50123 FFOutlmgPrc2 IIPHand Error.%n%1 Processing of output image failed. Restart. If the same symptom frequently occurs,
perform a reinstallation and then initialize the image
database.
50400 FFQCAutoCalcCom File %1, Spot %2, Fatal Error (exceptional error)
Code %3.
50500 FFQCAutoCalcCom File %1, Spot %2, Fatal Error (exceptional error)
Code %3.
50600 FFIipMedia Logical Program Error. %n Program error. Restart.
50601 FFIipMedia Catch Exception Error. %n An unexpected exception error occurred. Restart.
50602 FFIipMedia Out Of Memory Error. %n Failed in securing necessary memory. Restart.
50603 FFIipMedia Data Base Error. %n An error occurred in the database. Restart.
50604 FFIipMedia Not Initialize. %n Initialization not performed. Restart.
50605 FFIipMedia File I/O Error. %n An error occurred while in file read processing. Check to see if the image file is correct.
50606 FFIipMedia Create Instance Error. %n Failed in creating COM component instance. Restart.
50607 FFIipMedia Pipe Create Error. %n Failed in creating a pipe. Restart.
50608 FFIipMedia Pipe Create Error. %n Failed in closing a pipe. Restart.
50609 FFIipMedia The Demand Is Already The relevant request cannot be accepted because Wait for a while and then re-implement as there is a
Performing. %n it is now being implemented or other request is now process that is being now implemented.
being implemented.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-124
Appendix A CL Error Message Table Appx MT A-125
Event Event Source Description Causes Remedies Remarks
50610 FFIipMedia Send Message Error. %n Failed in transmitting a message (Send message Restart.
failure).
50611 FFIipMedia Unjust Event Reception. %n An illegal event, such as inconsistency in AE name, Make sure that the network setting is correct.
was received.
50612 FFIipMedia Not FCR Image. %n The selected study couldn’t be acquired because it Make sure that the image file is correct.
didn’t include FCR images.
50613 FFIipMedia AEMedia no entry. %n No media that is for the determined AE is registered. Make sure that the network setting is correct.
50614 FFIipMedia Resource Access Error. %n A resource access error. Restart.
50615 FFIipMedia Media Process End. %n The media control process ended. Nothing particular.
50616 FFIipMedia UPSEvent Pipe Create Failure. Failed in creating a named pipe for detection of power Restart.
%n rupture.
50617 FFIipMedia Attribute Error. %n The attribute caused an error to occur. Make sure that the network setting is correct.
50618 FFIipMedia Picture storage demand start Failed in starting a request for image storage. Make sure that the image file is correct.
failure. %n
50619 FFIipMedia Picture get demand start failure. Failed in starting a request for image acquisition. Make sure that the image file is correct.
%n
50620 FFIipMedia Send Message Error. %n Message transmission error. Restart.
50621 FFIipMedia Get Host Name Error. %n An error occurred when acquiring a host name. Restart.
50622 FFIipMedia Resistry Error. %n Failed in operating a registry. Restart.
50623 FFIipMedia DVDform.exe not exist. %n The DVDForm.exe file did not exist. Check the format function system setting.
50624 FFIipMedia DVDform.exe Start Error. %n Failed in starting the DVDForm.exe file. Check the format function system setting.
50625 FFIipMedia DVDform.exe. Operation Error. An error occurred while operating the DVDForm.exe Check the format function system setting.
%n file.
50626 FFIipMedia Format end Error. %n A format end detection error. Check the format function system setting.
50627 FFIipMedia Media Format Error. %n A media format failure. Nothing particular.
50628 FFIipMedia Media Drive Type Error. %n The media drive type was not correct. Make sure that the network setting is correct.
50629 FFIipMedia BatFile not exist. %n The bat file did not exist. Restart.
50630 FFIipMedia MediaDB Restore Error. %n An error occurred while in bat restore processing. Restart.
50631 FFIipMedia MediaDB Store Error. %n An error occurred while in bat store processing. Restart.
50632 FFIipMedia Message Box Error. %n An error occurred in the custom message box. Nothing particular.
50633 FFIipMedia File Format Error. %n The file format is not correct. Nothing particular.
50634 FFIipMedia Can’t Terminate by Storrtrv busy. The Terminate process was disabled because the Wait for a while and then re-implement because there
%n thread was in operation or in process of finishing. is a process in operation.
50635 FFIipMedia DDOFile Invalid. %n An illegal image information file. Nothing particular.
50636 FFIipMedia Reconstruction is Error. %n An error occurred during data reconstruction Nothing particular.
processing.
50637 FFIipMedia Program Error. %n Program error. Restart.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-125
Appendix A CL Error Message Table Appx MT A-126
Event Event Source Description Causes Remedies Remarks
50638 FFIipMedia File I/O Error. %n File I/O error. Restart.
50639 FFIipMedia Memory not allocated. %n Memory securing error. Restart.
50640 FFIipMedia Other Error. %n Other errors. Restart.
50641 FFIipMedia ddo error. %n Failed in image information processing. Nothing particular.
50642 FFIipMedia Drive not Exist. %n The specified drive did not exist. Make sure that the network setting is correct.
50643 FFIipMedia Disk not Exist. %n There was no disk in the specified drive. Make sure that the network setting is correct.
50644 FFIipMedia Not Removable. %n The specified drive was not for removable media. Make sure that the network setting is correct.
50645 FFIipMedia Eject FALSE. %n Media ejection failed. Nothing particular.
50646 FFIipMedia Lock FALSE. %n Media lock failed. Nothing particular.
50647 FFIipMedia Unlock FALSE. %n Media unlock failed. Nothing particular.
50648 FFIipMedia Cannot get Freespace. %n Failed in securing free space. Nothing particular.
50649 FFIipMedia SaveDCMFile FALSE. %n Failed in creating a DICOM format file. Nothing particular.
50650 FFIipMedia SaveDDOFile FALSE. %n Failed in creating an image information file. Nothing particular.
50651 FFIipMedia Set invalid value. %n No parameter values have been set up. Restart.
50652 FFIipMedia Cannot make DICOMDIR. %n Failed in creating DICOMDIR. Replace the media.
50653 FFIipMedia Cannot create file. %n CreateFile method error. Restart.
50654 FFIipMedia Cannot mapping file. %n CreateFileMapping method error. Restart.
50655 FFIipMedia Cannot mapview of file. %n MapViewOfFile method error. Restart.
50656 FFIipMedia Cannot flushview of file. %n MapViewOfFile method error. Restart.
50657 FFIipMedia Not Found consistflag. %n The file consistency flag was not found in DICOMDIR. Make sure that the image file is correct.
50658 FFIipMedia Drive not Ready. %n The drive was not ready for use. Nothing particular.
50659 FFIipMedia File not Found. %n The file did not exist. Nothing particular.
50660 FFIipMedia Load DICOMDIR no use. %n Failed in reading the media management file. Make sure that the image file is correct.
50661 FFIipMedia Initialize failed. %n Failed in initialization processing. Restart.
50662 FFIipMedia Data not found. %n No data available. Make sure that the image file is correct.
50663 FFIipMedia DeleteFile failed. %n Failed in deleting the file. Make sure that the image file is correct.
50664 FFIipMedia Memory not allocated. %n Failed in securing memory. Restart.
50665 FFIipMedia File I/O Error. %n A failure occurred in file reading processing. Restart.
50666 FFIipMedia Buffer Error. %n Failed in securing buffer. Restart.
50667 FFIipMedia Get filesize failed. %n Failed in acquiring the file size. Restart.
50668 FFIipMedia Not set path. %n No paths have been set. Make sure that the network setting is correct.
50669 FFIipMedia Incorrect image information. %n Image information was not correct. Make sure that the image file is correct.
50670 FFIipMedia FFGetString failed. %n A failure occurred with the FFGetString function. Restart.
50671 FFIipMedia DB COM create failed. % A failure occurred in creation of a database instance. Restart.
50672 FFIipMedia DB COM connect failed. %n A failure occurred in connection of the database. Restart.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-126
Appendix A CL Error Message Table Appx MT A-127
Event Event Source Description Causes Remedies Remarks
50673 FFIipMedia DB COM close failed. %n A failure occurred when releasing the database. Restart.
50674 FFIipMedia ADO queryinterface failed. %n A failure occurred in acquisition of the ADO interface. Restart.
50675 FFIipMedia DB COM openrecordset failed. %n Failed in acquiring a record set. Restart.
50676 FFIipMedia DB COM updaterecordset failed. Failed in updating the record. Restart.
%n
50677 FFIipMedia DB COM closerecordset failed. Failed in releasing the record set. Restart.
%n
50678 FFIipMedia DB COM deleterecordset failed. Failed in deleting the record. Restart.
%n
50679 FFIipMedia ADO setrecord failed. %n Failed in setting up the ADO interface record. Restart.
50680 FFIipMedia FFDicom2Internal failed. %n A failure occurred with the FFDicom2Internal function. Restart.
50681 FFIipMedia FFInternal2Output failed. %n A failure occurred with the FFInternal2Output function. Restart.
50700 FFIIPDicomQR Unknown Error. %n[Module] An error of unknown cause occurred. Restart the system.
%1%n[Function] %2
%n[SpotCode]%3 %n[Ret]%4
%n[Description]%5
50700 FFCustomMsgBox [50700] An unknown error The system was unstable. Restart. If the same symptom recurs, perform a
occurred. reinstallation.
50701 FFIIPDicomQR Logical Program Error. Exception An exceptional error occurred. It is difficult to continue Restart the system.
has Occurred. %n[Module] %1 processing because it is a serious error.
%n[Function] %2 %n[SpotCode]
%3 %n[Ret]%4 %n[Description]
%5
50701 FFCustomMsgBox [50701] Failed in initialization The system was unstable. Restart. If the same symptom recurs, perform a
processing. reinstallation.
50702 FFIIPDicomQR Logical Program Error. Not The error that occurred is unsupported though it is Restart the system.
Supported Case. %n[Module] %1 within the supposed range. Processing cannot be
%n[Function] %2 %n[SpotCode] continued because it is a serious error.
%3 %n[Ret]%4 %n[Description]
%5
50703 FFIIPDicomQR Initialization Error. %n[Module] %1 An initialization processing error. Restart the system.
%n[Function] %2 %n[SpotCode]
%3 %n[Ret]%4 %n[Description]
%5
50704 FFIIPDicomQR UnInitialization Error. A shutdown processing error. Restart the system.
%n[Module] %1 %n[Function] %2
%n[SpotCode] %3 %n[Ret]%4
%n[Description] %5

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-127
Appendix A CL Error Message Table Appx MT A-128
Event Event Source Description Causes Remedies Remarks
50705 FFIIPDicomQR System Configuration A system setup acquisition error. Shut down the system to make sure that system
Information Acquisition Error. settings are correct.
%n[Module] %1 %n[Function] %2
%n[SpotCode] %3 %n[Ret]%4
%n[Description] %5
50706 FFIIPDicomQR Network Configuration A network setting acquisition error. Shut down the system to make sure that system
Information Acquisition Error. settings are correct.
%n[Module] %1 %n[Function] %2
%n[SpotCode] %3 %n[Ret]%4
%n[Description] %5
50707 FFIIPDicomQR Resource (Message/String/ A resource (message, character string, BMP, etc.) Restart the system.
Bitmap etc.) Acquisition Error. acquisition error.
%n[Module] %1 %n[Function] %2
%n[SpotCode] %3 %n[Ret]%4
%n[Description] %5
50708 FFIIPDicomQR Registry Information Acquisition A registry setting acquisition error. Restart the system.
Error. %n[Module] %1
%n[Function] %2 %n[SpotCode]
%3 %n[Ret]%4 %n[Description]
%5
50709 FFIIPDicomQR InterProcess Message An error occurred during an inter-process message Restart the system.
Communication Error. communication.
%n[Module] %1 %n[Function] %2
%n[SpotCode] %3 %n[Ret]%4
%n[Description] %5
50710 FFIIPDicomQR Database Access Error. A database access error. Restart the system.
%n[Module] %1 %n[Function] %2
%n[SpotCode] %3 %n[Ret]%4
%n[Description] %5
50711 FFIIPDicomQR DDO Access Error. %n[Module] A DDO file access error. Restart the system.
%1 %n[Function] %2
%n[SpotCode] %3 %n[Ret]%4
%n[Description] %5
50720 FFIIPDicomQR Query Processing Error. A search processing error occurred. Processing Restart the system.
%n[Module] %1 %n[Function] %2 cannot be continued because it is a serious error.
%n[SpotCode] %3 %n[Ret]%4
%n[Description] %5
50721 FFIIPDicomQR Queried Information Display Error. A search result display error occurred. Processing Restart the system.
%n[Module] %1 %n[Function] %2 cannot be continued because it is a serious error.
%n[SpotCode] %3 %n[Ret]%4
%n[Description] %5

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-128
Appendix A CL Error Message Table Appx MT A-129
Event Event Source Description Causes Remedies Remarks
50740 FFIIPDicomQR Retrieve Processing Error. An acquisition processing error. Processing cannot be Restart the system.
%n[Module] %1 %n[Function] %2 continued because it is a serious error.
%n[SpotCode] %3 %n[Ret]%4
%n[Description] %5
50741 FFIIPDicomQR Retrieved Image Display Error. An acquired image display error occurred. Processing Restart the system.
%n[Module] %1 %n[Function] %2 cannot be continued because it is a serious error.
%n[SpotCode] %3
n[Ret]%4 %n[Description] %5
50742 FFIIPDicomQR Retrieved Image Output Error. An image delivery processing error occurred. Restart the system.
%n[Module] %1 %n[Function] %2 Processing cannot be continued because it is a
%n[SpotCode] %3 %n[Ret]%4 serious error.
%n[Description] %5
50809 FFCustomMsgBox [50809] An unknown anomaly was The system was unstable. Restart. If the same symptom recurs, perform a
encountered. reinstallation.
50900 FFIIPImgProcServer Error.%n%1 An error occurred while creating a PDI image. Restart. Image processing server
51001 FFIIPOUTPUT Initialize Warning.%n[%1] Initialization process warning. Check the network settings. If any setting is incorrect,
perform a reinstallation.
• The output equipment execution was not
successfully started.
• The output equipment name (AE name/ host
name) was not successfully acquired (there was
an inconsistency between the option and network
settings).
• The FFNET database was not successfully
accessed.
51001 Spooler Initialize Warning.%n[%1] Initialization process warning. Restart. If the same symptom frequently occurs, Output section container.
perform a reinstallation.
• An output device execution was not successfully
started.
• An output device name (AE name/host name) was
not successfully acquired.
• FFNETDB access was unsuccessful.
51002 FFIIPOUTPUT State Change Warning.%n[%1] State transition notification process warning. Restart.
• The response to an acquisition request was not
successfully made.
51002 Spooler State Change Warning.%n[%1] State change notification process warning. Restart. Output section container.
• An acquisition request was not successfully
answered.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-129
Appendix A CL Error Message Table Appx MT A-130
Event Event Source Description Causes Remedies Remarks
51007 Spooler Terminate Warning.%n[%1] Termination process warning. Restart. Output section container.
• A process status flag was not successfully set.
• A process termination response message was not
successfully transmitted.
• An abnormality occurrence notification message
was not successfully transmitted.
• A message box was not successfully displayed.
• A spooler termination request was not successfully
called.
• A spooler control end request was not successfully
called.
• The spooler control end response state was
abnormal.
• An image process control end request was not
successfully issued.
• An output device control end request was not
successfully issued.
• The output device control end response state was
abnormal.
51010 FFCustomMsgBox [51010] Specified device does not The setup data was incorrect or the equipment not Reset the data or check the equipment.
exist. started.
51011 FFCustomMsgBox [51011] Failed in reading of the The setup file format was incorrect or the file could Check settings.
configuration file (TagLookup.ini). not be read.
51012 FFCustomMsgBox [51012] Failed in reading of the The setup file format was incorrect or the file could Check settings.
gray level correction file. not be read.
51013 FFCustomMsgBox [51013] Failed in output process. The system was unstable. Restart. If the same symptom recurs, perform a
reinstallation.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-130
Appendix A CL Error Message Table Appx MT A-131
Event Event Source Description Causes Remedies Remarks
51015 FFIIPOUTPUT Terminate Warning.%n[%1] Termination process warning. Restart.
• The process status flag was not successfully set.
• The process termination response message was not
successfully transmitted.
• The abnormality occurrence notification message
was not successfully transmitted.
• The message box was not successfully opened.
• The spooler termination request call was not
successfully made.
• The spooler control termination request call was not
successfully made.
• The spooler control termination response status was
abnormal.
• The image processing control termination request
was not successfully made.
• The output equipment control termination request
was not successfully made.
• The output equipment control termination response
status was abnormal.
51300 FFCustomMsgBox [51300] The measurement The measurement process could not be performed Make sure that the images are entered.
process cannot be performed. because there was no image.
51301 FFCustomMsgBox [51301] The hard disk is full. The remaining free space is insufficient. Increase the free space and then perform the output
process again.
51302 FFCustomMsgBox [51302] Failed in the image output The image output process could not be performed Start up the host at the output destination and then
process. because the host at the output destination was not perform the output process again.
running.
51303 FFCustomMsgBox [51303] The measurement The measurement process could not be performed To perform the measurement process, use images
process cannot be performed. because images derived from different image readers that are derived from the same image reader.
are contained in a single study.
51304 FFCustomMsgBox [51304] The measurement All the images necessary for measurement process Make sure that the images are entered.
process cannot be performed. execution were not entered.
51305 FFCustomMsgBox [51305] The measurement The measurement process can be performed only Check the 1-Shot Phantom image size and make an
process cannot be performed. when the 1-Shot Phantom image size is 2430cm or exposure again.
larger.
51306 FFCustomMsgBox [51306] The entered value is The entered monitor dosage value was out of range. Enter another value.
illegal.
51307 FFCustomMsgBox [51307] The entered value is The artifact setting was out of range. Enter another value.
illegal.
51308 FFCustomMsgBox [51308] The entered value is The burger phantom setting was out of range. Enter another value.
illegal.
51309 FFCustomMsgBox [51309] The entered value is The wire mesh setting was out of range. Enter another value.
illegal.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-131
Appendix A CL Error Message Table Appx MT A-132
Event Event Source Description Causes Remedies Remarks
51310 FFCustomMsgBox [51310] The data save process The save process could not be performed because Make sure that the images are entered.
cannot be performed. there was no image.
51311 FFCustomMsgBox [51311] The measurement process The phantom position was invalid. Ensure that the phantom is properly positioned for the
cannot be performed. IP, and then make an exposure again.
51312 FFCustomMsgBox [51312] Failed in the image output The selected image was not found. Select an image that can be output.
process.
51313 FFCustomMsgBox [51313] The entered value is The S-value setting was out of range. Enter another value.
illegal.
51314 FFCustomMsgBox [51314] The entered value is The shading setting was out of range. Enter another value.
illegal.
51315 FFCustomMsgBox [51315] The entered value is The image noise setting was out of range. Enter another value.
illegal.
51316 FFCustomMsgBox [51316] The entered value is The sharpness setting was out of range. Enter another value.
illegal.
51317 FFCustomMsgBox [51317] The entered value is The jitter setting was out of range. Enter another value.
illegal.
51318 FFCustomMsgBox [51318] The entered value is The linearity setting was out of range. Enter another value.
illegal.
51319 FFCustomMsgBox [51319] The entered value is The setting for accuracy of measurement was out of Enter another value.
illegal. range.
51320 FFCustomMsgBox [51320] Failed in accessing the The image file was not found. Make sure that the images are entered.
image file.
51321 FFCustomMsgBox [51321] Failed in accessing the The database could not be accessed. Restart.
database. [ReaderQC]
51322 FFCustomMsgBox [51322] Failed in the data save The output file was not successfully created. Perform the log output process again.
process.
51323 FFCustomMsgBox [51323] An error of unknown Restart. If the same symptom recurs, perform a
cause occurred. reinstallation.
51324 FFCustomMsgBox [51324] The measurement The measurement process could not be performed Check the menu for a mixture of high- and standard-
process cannot be performed. because images differing in reading pixel density pixel density images, and then make an exposure
coexisted. again.
51325 FFCustomMsgBox [51325] The image is illegal. The 1-Shot Phantom image was invalid. Ensure that the phantom is properly positioned for the
IP, and then make an exposure again.
51326 FFCustomMsgBox [51326] The measurement The image reader name was not set for the image file. Ensure that the name is properly set.
process cannot be performed.
51359 FFCustomMsgBox [51359] Failed in acquiring data Failed in reading the INF file. Reregister the study menu and make an exposure
from the .INF file. again.
51501 FFCustomMsgBox [51501] Failed in initialization An abnormality occurred during the initialization of the Processes other than FINP input can be performed.
processing. FINP input subsystem.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-132
Appendix A CL Error Message Table Appx MT A-133
Event Event Source Description Causes Remedies Remarks
51502 FFCustomMsgBox [51502] Descrepancy in settings. The PRINT attribute output destination was not Specify the PRINT attribute output destination.
specified.
51701 FFIIPDicomQR Failed in Query Processing. Necessary processing failed. Continue processing. If the same error still occurs, Change of an existing
%n[Module] %1 %n[Function] %2 restart the system. log
%n[SpotCode] %3 %n[Ret]%4
%n[Description] %5
51702 FFCustomMsgBox [51702] Failed in displaying the The search result includes illegal data. Stop acquiring studies that include illegal information.
study information list.
51710 FFCustomMsgBox [51710] Input information includes Input information includes illegal data. Input correct data.
illegal characters.
51711 FFCustomMsgBox [51711] Input information exceeds Input information includes illegal data. Input correct data.
the limit number of characters.
51712 FFCustomMsgBox [51712] The hit rate of searching The number of hit studies is many. Narrow down the search conditions accordingly.
for studies exceeded the limit
value. Search processing is
suspended.
51713 FFCustomMsgBox [51713] Failed in searching study The system was unstable. Restart. If the same symptom recurs, perform a
information. reinstallation.
51714 FFCustomMsgBox [51714] A network error occurred The network settings were inappropriate. Check settings of network and other connected
while in search of study equipment.
information.
51715 FFCustomMsgBox [51715] A timeout error occurred The network settings were inappropriate. Check settings of network and other connected
while in search of study equipment.
information. No responses come
from equipment targeted for
search.
51717 FFCustomMsgBox [51717] Information of equipment The network settings were inappropriate. Check settings of network and other connected
targeted for search cannot be equipment.
found. Network settings may not
be correct.
51718 FFCustomMsgBox [51718] A communication error The network settings were inappropriate. Check settings of network and other connected
occurred while in search of study equipment.
information.
51720 FFIIPDicomQR Query Processing Error. A search processing error occurred. Processing can If the same error still recurs, restart the system.
%n[Module] %1 %n[Function] %2 be continued after the error is notified to the user as it
%n[SpotCode] %3 %n[Ret]%4 is insignificant.
%n[Description] %5
51721 FFIIPDicomQR Queried Information Display Error. A search result display error occurred. Processing can If the same error still recurs, restart the system.
%n[Module] %1 %n[Function] %2 be continued after the error is notified to the user as it
%n[SpotCode] %3 %n[Ret]%4 is insignificant.
%n[Description] %5

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-133
Appendix A CL Error Message Table Appx MT A-134
Event Event Source Description Causes Remedies Remarks
51721 FFCustomMsgBox [51721] Study acquisition The system was unstable. Restart. If the same symptom recurs, perform a
processing has failed. Images that reinstallation.
are unable to be displayed may
exist within the study.
51722 FFCustomMsgBox [51722] Failed in processing to Free space on the hard disk is insufficient. Increase free space on the hard disk appropriately.
acquire studies. Free hard disk
space is not sufficient.
51722 FFIIPDicomQR Failed in Query Processing. A query processing error occurred. Processing can be Continue processing. If the same error still recurs, Change of an existing
%n[Module] %1 %n[Function] %2 continued after the error is notified to the user as it is restart the system. log
%n[SpotCode] %3 %n[Ret]%4 insignificant.
%n[Description] %5
51723 FFCustomMsgBox [51723] Failed in processing to An acquired study includes illegal data. Stop acquiring studies that include illegal information.
acquire studies. Studies include
images that cannot be displayed.
51725 FFCustomMsgBox [51725] Information of equipment Network settings were inappropriate. Check settings of network and other connected
targeted for image acquisition equipment.
cannot be found. Network settings
may not be correct.
51726 FFCustomMsgBox [51726] A communication error Network settings were inappropriate. Check settings of network and other connected
occurred in an attempt to acquire equipment.
studies.
51727 FFCustomMsgBox [51727] A timeout error occurred Network settings were inappropriate. Check settings of network and other connected
while in process of study equipment.
acquisition. No responses come
from the equipment targeted for
study acquisition.
51729 FFCustomMsgBox [51729] Input information is not Input information includes illegal data. Input correct information.
correct.
51730 FFCustomMsgBox [51730] An attempt is made to Acquired study information includes illegal data. Stop acquiring studies that include illegal information.
acquire a study generated by an
unknown modality.
51731 FFCustomMsgBox [51731] A study generated by an Acquired information includes illegal data. Stop acquiring studies that include illegal information.
unknown modality was acquired.
51732 FFCustomMsgBox [51732] The hit rate of searching The number of hit studies is many. Narrow down the search conditions accordingly.
for studies exceeded the listed
limit value.
51740 FFIIPDicomQR Retrieve Processing Error. A study acquisition error occurred. Processing can be If the same error still recurs, restart the system.
%n[Module] %1 %n[Function] %2 continued after the error is notified to the user as it is
%n[SpotCode] %3 %n[Ret]%4 insignificant.
%n[Description] %5

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-134
Appendix A CL Error Message Table Appx MT A-135
Event Event Source Description Causes Remedies Remarks
51741 FFIIPDicomQR Retrieved Image Display Error. An error occurred when displaying acquired images. If the same error still recurs, restart the system.
%n[Module] %1 %n[Function] %2 Processing can be continued after the error is notified
%n[SpotCode] %3 %n[Ret]%4 to the user as it is insignificant.
%n[Description] %5
51742 FFIIPDicomQR Retrieved Image Output Error. A delivery processing error occurred. Processing can If the same error still recurs, restart the system.
%n[Module] %1 %n[Function] %2 be continued after the error is notified to the user as it
%n[SpotCode] %3 %n[Ret]%4 is insignificant.
%n[Description] %5
51743 FFIIPDicomQR Failed in Retrieve Processing. An acquisition error occurred. Processing can be Continue processing. If the same error still recurs, Change of an existing
%n[Module] %1 %n[Function] %2 continued after the error is notified to the user as it is restart the system. log
%n[SpotCode] %3 %n[Ret]%4 insignificant.
%n[Description] %5
51805 FFCustomMsgBox [51805] Failed in image display Acquired studies include illegal data. Stop acquiring studies that include illegal information.
processing. Some images cannot
be displayed.
51806 FFCustomMsgBox [51806] Failed in image distribution Acquired studies include illegal data. Stop acquiring studies that include illegal information.
processing.
51810 FFCustomMsgBox [51810] Information on the device Network settings were inappropriate. Check settings of network and other connected
targeted for image printout was equipment.
not found. Network settings may
possibly be incorrect.
52000 FFFinpSend Warning.%n%1 Information for development personnel. There is no problem with operations.
52000 FFOutImgPrc Warning.%n%1 Information for development personnel. There is no problem with operations.
52000 FFOutImgPrc2 Warning.%n%1 Information for development personnel. There is no problem with operations.
52002 FFEifPrinter SMCU Driver error. An error occurred in the SMCU driver. Restart.
[%1] The problem might have been caused, for instance,
by data incompleteness or system instability.
52003 FFEifPrinter EIFIMG Driver error. An error occurred in the EIFIMG driver. It is Restart.
[%1] conceivable that the system was unstable.
52004 FFEifPrinter Received unexpected command. An unknown command was received from the printer. Check the log of communications with the connected
[%1] printer or restart the printer/IIP.
52006 FFEifPrinter File Error. The raw data file for output was not found. Since the problem is attributable to a program error,
[%1] try performing a reinstall.
52100 FFQCMsgBox Custom DB Access Error. [File The bitmap was not successfully acquired. Check that the bitmap file is installed.
Name]
[Function Name] [50112]

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-135
Appendix A CL Error Message Table Appx MT A-136
Event Event Source Description Causes Remedies Remarks
52100 Spooler Spooler Warning.%n%1 Common warning message. Restart. If the same symptom frequently occurs, Spooler
perform a reinstallation and then initialize the image
• Queue information class related message. Image
database.
information (SOPInstanceUID) was not successfully
acquired. The job status was not successfully
acquired.
• Spooler class related message.
A database connection was not successfully closed.
• Illegal image display format data.
52101 Spooler RunProc Warning.%n%1 Initialization process warning. Restart. If the same symptom frequently occurs, Spooler
perform a reinstallation and then initialize the image
• A character string database connection was not
database.
successfully opened.
52102 FFQCMsgBox SysConfig DB Access Failure An error/invalid value was encountered when Restart.
(Processing continuation). an attempt was made to acquire a system setup
[File Name] database access API value.
[Function Name] [52102]
52103 FFQCMsgBox LangStr DB Access Failure An error occurred when an attempt was made to Restart.
(Processing continuation). acquire a character string database access API value.
[File Name]
[Function Name] [52103]
52103 Spooler StateChangeProc Warning.%n%1 Local printer/Dicom printer state change notification Restart. If the same symptom frequently occurs, Spooler
process warning. perform a reinstallation and then initialize the image
database.
• A unit state character string was not successfully
acquired.
52105 FFQCMsgBox [52105] Failed to access the The FF32 library (FF32dll) return value was in error. It is probable that the installation was not properly
definition file (ID change required). completed. Perform a reinstallation.
* For option key registry acquisition, no error occurs
even if the key is missing.
52105 Spooler RestoreJob Warning.%n%1 Job restoration warning. Restart. If the same symptom frequently occurs, Spooler
perform a reinstallation and then initialize the image
• An output job file was not successfully accessed.
database.
52108 FFQCMsgBox Custom DB Access Failure An attempt to set/acquire a value from ReaderQC. Restart.
(Processing continuation) [File mdb failed.
Name]
[Function Name] [52108]
52108 Spooler StudyReqEndProc Warning.%n%1 Examination end request process warning. Restart. If the same symptom frequently occurs, Spooler
perform a reinstallation and then initialize the image
• A database was not successfully accessed.
database.
• DDO file information was not successfully acquired.
52109 FFQCMsgBox FF32 DB Access Failure Registry setup/acquisition failed (replaceable). It is probable that the registry information was not
(Processing continuation) [File properly installed. Perform a reinstallation.
Name]
[Function Name] [52109]

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-136
Appendix A CL Error Message Table Appx MT A-137
Event Event Source Description Causes Remedies Remarks
52109 Spooler ExeOutputJob Warning.%n%1 Forced output request process warning. Restart. If the same symptom frequently occurs, Spooler
perform a reinstallation and then initialize the image
• DDO file information was not successfully acquired.
database.
52110 FFQCMsgBox FF32 DB Access Failure An image file access error occurred. Since the image is valid, make an exposure again.
(Processing continuation) [File
Name]
[Function Name] [52110]
52110 Spooler GetImageProcJob Warning.%n%1 Image processing job acquisition process warning. Restart. If the same symptom frequently occurs, Spooler
perform a reinstallation and then initialize the image
• An output unit type parameter error occurred.
database.
52112 Spooler GetOutputProcJob Output job acquisition response process Restart. If the same symptom frequently occurs, Spooler
Warning.%n%1 warning. perform a reinstallation and then initialize the image
database.
• An output unit type parameter error was
encountered.
52114 Spooler GetCommitProcJob Commitment job acquisition response process Restart. If the same symptom frequently occurs,
Warning.%n%1 warning. perform a reinstallation and then initialize the image
database.
• A commitment equipment type parameter error
occurred.
52116 Spooler QueueDelete Warning.%n%1 Queue deletion request process warning. Restart. If the same symptom frequently occurs, Spooler
perform a reinstallation and then initialize the image
• An image database flag was not successfully set.
database.
• The DDO file was not successfully deleted.
52117 Spooler UnitSuspend Warning.%n%1 Unit suspension request process warning. Restart. If the same symptom frequently occurs, Spooler
perform a reinstallation and then initialize the image
• A unit status character string was not successfully
database.
acquired.
52118 Spooler QueueDelete Warning.%n%1 Queue deletion request process warning. Restart. If the same symptom frequently occurs,
perform a reinstallation and then initialize the image
• The image database flag was not successfully set.
database.
• The DDO file was not successfully deleted.
52118 Spooler UnitResume Warning.%n%1 Unit resumption request process warning. Restart. If the same symptom frequently occurs, Spooler
perform a reinstallation and then initialize the image
• A unit status acquisition error occurred.
database.
52119 Spooler UnitSuspend Warning.%n%1 Equipment suspension request process warning. Restart. If the same symptom frequently occurs,
perform a reinstallation and then initialize the image
• The equipment status character string was not
database.
successfully acquired.
52120 Spooler UnitResume Warning.%n%1 Equipment resumption request process warning. Restart. If the same symptom frequently occurs,
perform a reinstallation and then initialize the image
• An equipment status acquisition error occurred.
database.
52400 FFQCAAutocalccom File %1, Spot %2, Code %3. Warning information. Perform reexposure and then measurement
processing because the image is illegal.
52500 FFQCAAutocalccom File %1, Spot %2, Code %3. Fatal error (exceptional error).

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-137
Appendix A CL Error Message Table Appx MT A-138
Event Event Source Description Causes Remedies Remarks
52720 FFIIPDicomQR Query Processing Error. A search processing error occurred. Processing can If the same error still recurs, restart the system.
%n[Module] %1 %n[Function] %2 be continued as it is insignificant.
%n[SpotCode] %3 %n[Ret]%4
%n[Description] %5
52721 FFIIPDicomQR Queried Information Display Error. A search result display error occurred. Processing can If the same error still recurs, restart the system.
%n[Module] %1 %n[Function] %2 be continued as it is insignificant.
%n[SpotCode] %3 %n[Ret]%4
%n[Description] %5
52740 FFIIPDicomQR Retrieve Processing Error. A study acquisition error occurred. Processing can be If the same error still recurs, restart the system.
%n[Module] %1 %n[Function] %2 continued as it is insignificant.
%n[SpotCode] %3 %n[Ret]%4
%n[Description] %5
52741 FFIIPDicomQR Retrieved Image Display Error. An error occurred when displaying an acquired study. If the same error still recurs, restart the system.
%n[Module] %1 %n[Function] %2 Processing can be continued as it is insignificant.
%n[SpotCode] %3 %n[Ret]%4
%n[Description] %5
52742 FFIIPDicomQR Retrieved Image Output Error. A delivery processing error occurred. Processing can If the same error still recurs, restart the system.
%n[Module] %1 %n[Function] %2 be continued as it is insignificant.
%n[SpotCode] %3 %n[Ret]%4
%n[Description] %5
52750 FFIIPDicomQR Logical Program Error. %nNetwork A timeout error occurred. Shut down the system to ensure that network
Warning (Timeout). %n%1 %n %2 settings are correct. Make sure that other connected
equipment is operating properly.
52751 FFIIPDicomQR Network Warning(Over Number Of The number for hit results exceeded the upper limit. Suspend search processing. Narrow down the search
Result). %n%1 %n %2 conditions to retry search processing.
52760 FFTsSearchCondition Disk Full Error. %n The hard disk is full. Restart the system.
52761 FFTsSearchCondition DB Operation Status Warning. %n A warning given when the database operation result Restart the system.
status is illegal.
52770 FFMaSearchCOM Disk Full Error. %n The hard disk is full. Restart the system.
52771 FFMaSearchCOM Network Error. %n A network error occurred. Restart the system.
52772 FFMaSearchCOM Network Error. %n The number for hit results exceeded the upper limit. Restart the system.
52800 FFIIPDicomQR Network Warning(Timeout). %n%1 A timeout error occurred. Shut down the system to ensure that network
%n %2 settings are correct. Make sure that other connected
equipment is operating properly.
52801 FFIIPDicomQR Network Warning(DiskFull). %n%1 The hard disk is full. Suspend acquisition of studies. Increase free space
%n %2 on the hard disk and then retry acquisition.
52802 FFIIPDicomQR Warning(Retrieve Image Nothing). The acquired study does not include images. Make sure that other connected equipment retains
%n%1 %n %2 correct study information.
52810 FFTsImgRetInd Disk Full Error. %n The hard disk is full. Restart the system.
52820 FFMaRetrieve Disk Full Error. %n The hard disk is full. Restart the system.
52821 FFMaRetrieve Storage SCP not found. %n No Storage SCP is set up. Restart the system.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-138
Appendix A CL Error Message Table Appx MT A-139
Event Event Source Description Causes Remedies Remarks
52822 FFMaRetrieve Cannot Get NetWork Setting. %n Necessary network settings cannot be acquired. Restart the system.
52823 FFMaRetrieve Integration Warning in DataBase. There is a problem with consistency of the database. Restart the system.
%n
52824 FFMaRetrieve DICOM Data Warning. %n A DICOM data-related warning. Restart the system.
52825 FFMaRetrieve Local Retrieve Warning. %n A warning given when images cannot be acquired Restart the system.
locally.
52826 FFMaRetrieve Input Image Warning A warning given when an SH image is input. Restart the system.
(DensityCode = SH). %n
52850 FFMaCommon Disk Full Error. %n The hard disk is full. Restart the system.
52851 FFMaCommon Debug Log OutPut. %n Event log output number for debugging purposes. Restart the system.
52852 FFMaCommon Disk Full Error. %n The hard disk is full. Restart the system.
52860 FFMaCommonImage Disk Full Error. %n The hard disk is full. Restart the system.
52870 FFTsCommon Disk Full Error. %n The hard disk is full. Restart the system.
52871 FFTsCommon Catch DB exception. %n An exceptional access to the database. Restart the system.
52900 FFIIPImgProcServer Warning.%n%1 There is a defect in the specified data. Check to see that the system configuration is correct. Image processing server
52901 FFIIPImgProcServer Dicom Data Object Error.%n%1 Image information processing failed while creating a Restart. Image processing server
PDI image.
52902 FFIIPImgProcServer JOB Error.%n%1 An attempt to create JOB information resulted in a Restart. Image processing server
failure while creating a PDI image.
52903 FFIIPImgProcServer I/F Error.%n%1 An error occurred when a request was issued to Restart. Image processing server
create a PDI image.
53106 Spooler SpoolProc Infomation.%n%1 Information in a spool process. Restart. If the same symptom frequently occurs, Spooler
perform a reinstallation and then initialize the image
• Unit type mismatch notification.
database.
53820 FFMaRetrieve Retrieve Process Start. %n Process startup. Restart the system.
53821 FFMaRetrieve Retrieve Process End. %n Process shutdown. Restart the system.
53823 FFMaRetrieve Image is Already Exists in Information given when the same image is input. Restart the system.
ImageDB. %n
53827 FFMaRetrieve 12Bits Image Cannot Retrieve. Discard the retrieved image as no 12-bit image can There is no problem with operations. Select another
This Image Is Deleted. be acquired. image that is not 12-bit.
53870 FFTsCommon Retry is success. %n Database retry information. Restart the system.
54100 FFQCMsgBox Journal Proc Failure. Writing error. Check to see the media has not been prohibited for
[File Name] writing.
[Function Name] [54100]
54600 FFIipMedia HDD Disk Full Error. %n The HDD disk was full. Secure sufficient HDD space by, for example, deleting
unnecessary images.
54601 FFIipMedia Network Error. %n An error occurred on the network. Make sure that the network setting is correct.
54602 FFIipMedia Not Mount. %n No destination has been mounted for data storage. Mount the drive.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-139
Appendix A CL Error Message Table Appx MT A-140
Event Event Source Description Causes Remedies Remarks
54603 FFIipMedia Media Ctrl(Format or Mount or Media control (either of formatting, mounting and Retry after a while because either of formatting,
Unmount)Run. %n unmounting) was in process. mounting and unmounting is in process.
54604 FFIipMedia Media Read Only. %n The media was for read only. Nothing particular.
54605 FFIipMedia Media Unformat. %n The media was not formatted. Nothing particular.
54606 FFIipMedia Media Storage Is Operating. %n Media storage was in process. Retry after a while because there is a process in
operation.
54607 FFIipMedia Message reception from other A message received from other equipment units. Nothing particular.
cases. %n
54608 FFIipMedia ReceptionMessage is Abnormal. The received message was not normal. Restart.
%n
54609 FFIipMedia Next Transaction by Timeout. %n The next processing started as a timeout occurred. Nothing particular.
54610 FFIipMedia Media Is Already Mount. %n The media has already been mounted. Nothing particular.
54611 FFIipMedia Set Default by acquisition failure. Default was set because a failure occurred during Nothing particular.
%n data acquisition from Directory.ini.
54612 FFIipMedia Media White Protect. %n The media was write-protected. Nothing particular.
54613 FFIipMedia DICOMDIR Read Only. %n The DICOMDIR file was for read only. Nothing particular.
54614 FFIipMedia Can’t Format by DICOMDIRfile. Formatting was not possible because there was the Nothing particular.
%n DICOMDIR file.
54615 FFIipMedia Not Browseable Media. %n It was not browseable media. Nothing particular.
54616 FFIipMedia Not Writeable Media. %n It was not writable media. Nothing particular.
54617 FFIipMedia No DICOMDIR Other Exist. %n There was no DICOMDIR file but were other files. Nothing particular.
54618 FFIipMedia DICOMDIR is mismatching. %n The DICOM DIR file was mismatching. Reconstruct the media.
54619 FFIipMedia Media no exist. %n No media existed. Nothing particular.
54620 FFIipMedia Mount User Cancel. %n The user canceled mounting processing. Nothing particular.
54621 FFIipMedia Version is Different. %n The database version was different from that of the Nothing particular.
version file.
54622 FFIipMedia Media Diskfull. %n The media disk was full. Replace the media.
54623 FFIipMedia Image not exist in media. %n Images for the requested study did not exist in the Nothing particular.
media.
54624 FFIipMedia Image can’t get Exist by Error. %n Images that couldn’t be acquired due to an error Nothing particular.
existed in the acquired study.
54625 FFIipMedia Allcancel by Electric Power Stop. Processing discontinued due to power rupture. Restart.
%n
54626 FFIipMedia DICOMDIR not Exist. %n The DICOMDIR file did not exist. Make sure that the image file is correct.
54627 FFIipMedia DICOMDIR is protected. %n The management file was for read only or write- Nothing particular.
protected.
54628 FFIipMedia Unsuitable right format. %n The media was unformatted or improperly formatted. Nothing particular.
54629 FFIipMedia Cancellation demand. %n Processing canceled as it was requested. Nothing particular.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-140
Appendix A CL Error Message Table Appx MT A-141
Event Event Source Description Causes Remedies Remarks
54630 FFIipMedia Reconstruction is not need. %n The management file needs not to be reconstructed. Nothing particular.
54631 FFIipMedia Disk Limit. %n The free disk space available was not sufficient. Secure sufficient HDD space by, for example, deleting
unnecessary images.
54632 FFIipMedia Other File Exists (May I format?). Files other than DICOMDIR existed. (Are you sure to Nothing particular.
%n format?)
54633 FFIipMedia Push the O.K. button after Insert the media and press the OK button. Nothing particular.
inserting media. %n
54634 FFIipMedia Finish Reconstruct. %n Reconstruction finished. Nothing particular.
54635 FFIipMedia Auto Mount Finished. %n Auto mounting finished. Nothing particular.
54635 UserUtility\ [54635] Delete image data in the This warning is always called when the USB initialize Warning for delete image
frmMediaStorage.frm USB memory ? button is clicked. data
54636 UserUtility\ [54636] No delete file. Display when initialized twice (re-initialized an already Initialize the USB flash drive completely with the
frmMediaStorage.frm initialized USB media). software which comes with USB flash drive.
Or USB media is not used in the media storage of
console.
54640 FFIipMedia Other Information. %n, Other information. Nothing particular.
54640 SKBLauncher Not Found USB Drive The USBPwd button is clicked while the USB flash Connect USB flash drive.
drive is not connected.
54640 SKBLauncher Failed GetRecordCount Failed in connecting to a MediaDB at the time of Restart.
initialization.
54640 SKBLauncher Failed Connect MediaDB Failed in disconnecting from the MediaDB at the time Restart.
of initialization.
54640 SKBLauncher Not Found SysConfig.mdb The SysConfig.mdb file could not be found at the time Check the system configuration setting.
of initialization.
54640 SKBLauncher Failed DB Connect Failed in connecting to a SysConfig.mdb file at the Check the system configuration setting.
time of initialization.
54640 SKBLauncher Not Found KEY Filed in searching data in the SysConfig.mdb file at the Check the system configuration setting.
time of initialization.
54640 SKBLauncher Not Found NetConfig.mdb The NetConfig.mdb file could not be found at the time Check the network setting.
of initialization.
54640 SKBLauncher Failed DB Connect Failed in connecting to a NetConfig.mdb file at the Check the network setting.
time of initialization.
54640 SKBLauncher Failed FFGetHostname Failed in acquiring a host name at the time of Check the network setting.
initialization.
54640 SKBLauncher Set MediaStorage Failed The media setting is not made in the Service Utility at Check the network setting.
the time of initialization.
54640 SKBLauncher Abnormal Termination Failed in terminating the connection with NetConfig. Check the network setting.
FFNetDBGetMediaByHostName mdb file.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-141
Appendix A CL Error Message Table Appx MT A-142
Event Event Source Description Causes Remedies Remarks
54640 SKBLauncherDlg Error Information The Bitmap folder path could not be found in the Reinstall.
(1) SKBLauncher Directry.ini file.
(2) CSKBLauncherDlg::SetBitmap()
(3) SetBitmap-1
(4) Not Found Bitmap Path
54640 SKBLauncherDlg Error Information One of the following file did not exist in the Bitmap Put the following files in the Bitmap folder described in
(1) SKBLauncher folder described in the Directory.ini file. the Directory.ini file.
(2) CSKBLauncherDlg::SetBitmap() • SKB_SKBOn_UP.bmp • SKB_SKBOn_UP.bmp
(3) SetBitmap-2 • SKB_SKBOn_DOWN.bmp • SKB_SKBOn_DOWN.bmp
(4) SKBOnButton Bitmap Set Error
54640 SKBLauncherDlg Error Information One of the following file did not exist in the Bitmap Put the following files in the Bitmap folder described in
(1) SKBLauncher folder described in the Directory.ini file. the Directory.ini file.
(2) CSKBLauncherDlg::SetBitmap() • SKB_SKBOff_UP.bmp • SKB_SKBOff_UP.bmp
(3) SetBitmap-3 • SKB_SKBOff_DOWN.bmp • SKB_SKBOff_DOWN.bmp
(4) SKBOffButton Bitmap Set Error
54640 SKBLauncherDlg Error Information One of the following file did not exist in the Bitmap Put the following files in the Bitmap folder described in
(1) SKBLauncher folder described in the Directory.ini file. the Directory.ini file.
(2) CSKBLauncherDlg::SetBitmap() • SKB_USBPwd_UP.bmp • SKB_USBPwd_UP.bmp
(3) SetBitmap-4 • SKB_USBPwd_DOWN.bmp • SKB_USBPwd_DOWN.bmp
(4) USBPwdButton Bitmap Set
Error
54640 SKBLauncherDlg Error Information One of the following file did not exist in the Bitmap Put the following files in the Bitmap folder described in
(1) SKBLauncher folder described in the Directory.ini file. the Directory.ini file.
(2) CSKBLauncherDlg::SetBitmap() • SKB_Open_UP.bmp • SKB_Open_UP.bmp
(3) SetBitmap-5 • SKB_Open_DOWN.bmp • SKB_Open_DOWN.bmp
(4) SKBOpenButton Bitmap Set
Error
54640 SKBLauncherDlg Error Information The Bitmap folder path could not be found in the Enter the Bitmap folder path in the Directry.ini file.
(1) SKBLauncher Directry.ini file.
(2) CSKBLauncherDlg::GetBmpPath()
(3) GetBmpPath-1
(4) Not Found Bmp folder
54640 SKBLauncherDlg Error Information One of the following file did not exist in the Bitmap Put the following files in the Bitmap folder described in
(1) SKBLauncher folder described in the Directory.ini file. the Directory.ini file.
(2) CSKBLauncherDlg::GetBmpPath() • SKBOffU.bmp • SKBOffU.bmp
(3) GetBmpPath-2 • SKBOffD.bmp • SKBOffD.bmp
(4) Not Found SKBOffU.bmp or
SKBOffD.bmp
54640 SKBLauncherDlg Error Information One of the following file did not exist in the Bitmap Put the following files in the Bitmap folder described in
(1) SKBLauncher folder described in the Directory.ini file. the Directory.ini file.
(2) CSKBLauncherDlg:: • SKBOnU.bmp • SKBOnU.bmp
GetBmpPath() • SKBOnD.bmp • SKBOnD.bmp
(3) GetBmpPath-3
(4) Not Found SKBOnU.bmp or
SKBOnD.bmp

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-142
Appendix A CL Error Message Table Appx MT A-143
Event Event Source Description Causes Remedies Remarks
54640 SKBLauncherDlg Error Information The SysConfig.mdb file path could not be found in the Enter the SysConfig.mdb file path in the Directry.ini
(1) SKBLauncher Directry.ini file. file.
(2) CSKBLauncherDlg::GetPath()
(3) GetPath-1
(4) Not Found SysConfig.mdb
54640 SKBLauncherDlg Error Information Failed in connecting to the SysConfig.mdb file. Reinstall.
(1) SKBLauncher
(2) CSKBLauncherDlg::GetPath()
(3) GetPath-2
(4) Failed DB Connect
54640 SKBLauncherDlg Error Information Data was not successfully acquired from the Reinstall.
(1) SKBLauncher SysConfig.mdb file.
(2) CSKBLauncherDlg::GetPath()
(3) GetPath-3
(4) Not Found KEY
54640 SKBLauncherDlg Error Information Drive for the USB flash drive could not be found. Reconnect the USB flash drive.
(1) SKBLauncher
(2) CSKBLauncherDlg::BootEXE()
(3) BootEXE-1
(4) Not Found USB Drive
54640 SKBLauncherDlg Error Information The NetConfig.mdb file path could not be found in the Enter the NetConfig.mdb file path in the Directry.ini
(1) SKBLauncher Directry.ini file. file.
(2) CSKBLauncherDlg::GetWorkFo
lderPath()
(3) GetWorkFolderPath-1
(4) Not Found NetConfig.mdb
54640 SKBLauncherDlg Error Information Failed in connecting to the NetConfig.mdb file. Reinstall.
(1) SKBLauncher
(2) CSKBLauncherDlg::
GetWorkFolderPath()
(3) GetWorkFolderPath-2
(4) Failed DB Connect
54640 SKBLauncherDlg Error Information Failed in acquiring a host name. Reinstall.
(1) SKBLauncher
(2) CSKBLauncherDlg::
GetWorkFolderPath()
(3) GetWorkFolderPath-3
(4) Failed FFGetHostname
54640 SKBLauncherDlg Error Information The FFNetDBGetMediaByHostName function finished Reinstall.
(1) SKBLauncher normally, but the applicable record did not exist (the
(2) CSKBLauncherDlg:: media setting was not made). The AEName and
GetWorkFolderPath() DriveName were empty.
(3) GetWorkFolderPath-4
(4) Set MediaStorage Failed

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-143
Appendix A CL Error Message Table Appx MT A-144
Event Event Source Description Causes Remedies Remarks
54640 SKBLauncherDlg Error Information The FFNetDBGetMediaByHostName function was Reinstall.
(1) SKBLauncher terminated abnormally.
(2) CSKBLauncherDlg::
GetWorkFolderPath()
(3) GetWorkFolderPath-5
(4)Abnormal Termination FFNetDB
GetMedia By HostName
54640 SKBLauncherDlg Error Information Failed in getting the total record count registered in the Reinstall.
(1) SKBLauncher Image table.
(2) CSKBLauncherDlg::
CheckHandlingBeginning()
(3) CheckHandlingBeginning-1
(4) Failed GetRecordCount
54640 SKBLauncherDlg Error Information Failed in connecting to the MediaDB. Reinstall.
(1) SKBLauncher
(2) CSKBLauncherDlg::
CheckHandlingBeginning()
(3) CheckHandlingBeginning-2
(4) Failed Connect MediaDB
54640 SKBLauncherDlg Error Information The Bitmap folder path could not be found in the Enter the Bitmap folder path in the Directry.ini file.
(1) SKBLauncher Directry.ini file.
(2) CSKBLauncherDlg::SetBitmap()
(3) SetBitmap-1
(4) Not Found Bitmap Path
54640 SKBLauncherDlg Error Information One of the following file did not exist in the Bitmap Put the following files in the Bitmap folder described in
(1) SKBLauncher folder described in the Directory.ini file. the Directory.ini file.
(2) CSKBLauncherDlg::SetBitmap() • SKB_SKBOn_UP.bmp • SKB_SKBOn_UP.bmp
(3) SetBitmap-2 • SKB_SKBOn_DOWN.bmp • SKB_SKBOn_DOWN.bmp
(4) SKBOnButton Bitmap Set Error
54640 SKBLauncherDlg Error Information One of the following file did not exist in the Bitmap Put the following files in the Bitmap folder described in
(1) SKBLauncher folder described in the Directory.ini file. the Directory.ini file.
(2) CSKBLauncherDlg::SetBitmap() • SKB_SKBOff_UP.bmp • SKB_SKBOff_UP.bmp
(3) SetBitmap-3 • SKB_SKBOff_DOWN.bmp • SKB_SKBOff_DOWN.bmp
(4) SKBOffButton Bitmap Set Error
54640 SKBLauncherDlg Error Information One of the following file did not exist in the Bitmap Put the following files in the Bitmap folder described in
(1) SKBLauncher folder described in the Directory.ini file. the Directory.ini file.
(2) CSKBLauncherDlg::SetBitmap() • SKB_USBPwd_UP.bmp • SKB_USBPwd_UP.bmp
(3) SetBitmap-4 • SKB_USBPwd_DOWN.bmp • SKB_USBPwd_DOWN.bmp
(4) USBPwdButton Bitmap Set
Error

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-144
Appendix A CL Error Message Table Appx MT A-145
Event Event Source Description Causes Remedies Remarks
54640 SKBLauncherDlg Error Information One of the following file did not exist in the Bitmap Put the following files in the Bitmap folder described in
(1) SKBLauncher folder described in the Directory.ini file. the Directory.ini file.
(2) CSKBLauncherDlg::SetBitmap() • SKB_Open_UP.bmp • SKB_Open_UP.bmp
(3) SetBitmap-5 • SKB_Open_DOWN.bmp • SKB_Open_DOWN.bmp
(4) SKBOpenButton Bitmap Set
Error
54640 USBLauncherDlg.cpp Error Information A USBPathSet.ini file was not successfully opened. Put the USBPathSet.ini file on “C:\Program Files\
(1) USBLauncher FujiFilm\IIP\Config\USBPathSet.ini”, and enter the
(2) CUSBLauncherDlg:: path for the EXE file.
GetWorkFolderPath()
(3) GetUSBWorkFolderPath-1
(4) Failed File Open USBPathSet.
ini
54640 USBLauncherDlg.cpp Error Information Drive for the USB flash drive could not be found. Reconnect the USB flash drive.
(1) SKBLauncher
(2) CSKBLauncherDlg::BootEXE()
(3) BootEXE-1
(4) Not Found USB Drive
54640 USBLauncherDlg.cpp Error Information The Bitmap folder path could not be found in the Enter the Bitmap folder path in the Directry.ini file.
(1) USBLauncher Directry.ini file.
(2) CUSBLauncherDlg::SetBitmap()
(3) SetBitmap-1
(4) Not Found Bitmap Path
54640 USBLauncherDlg.cpp Error Information One of the following file did not exist in the Bitmap Put the following files in the Bitmap folder described in
(1) USBLauncher folder described in the Directory.ini file. the Directory.ini file.
(2) CUSBLauncherDlg:: • USBPwd_UP.bmp • USBPwd_UP.bmp
GetWorkFolderPath() • USBPwd_DOWN.bmp • USBPwd_DOWN.bmp
(3) GetUSBWorkFolderPath-2
(4) USBPwdButton Bitmap Set
Error
54640 FFIipMedia [0] MediaCommonCOM The media removal button was clicked while the USB No remedy is required since this is only for
[1] MediaDevEject flash drive being inserted to the USB port. information.
[2] MediaDevEject-3
[3] [DriveLetter] Drive is not CD/
DVD Drive
54640 SKBLauncherDlg.cpp [0] SKBLauncher An exceptional error such as insufficient memory Restart the PC. If this occurs again, contact the head
[1] CSKBLauncherDlg::BootEXE() occurred. office.
[2] BootEXE-2
[3] Exception error
54640 SKBLauncherDlg.cpp [0] SKBLauncher An exceptional error such as insufficient memory Restart the PC. If this occurs again, contact the head
[1] CSKBLauncherDlg::IsUnLockUSB() occurred. office.
[2] IsUnLockUSB-1
[3] Exception error

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-145
Appendix A CL Error Message Table Appx MT A-146
Event Event Source Description Causes Remedies Remarks
54640 SKBLauncherDlg.cpp [0] SKBLauncher An exceptional error such as insufficient memory Restart the PC. If this occurs again, contact the head
[1] CSKBLauncherDlg::DeleteAll occurred. office.
XMLFile()
[2] DeleteAllXMLFile-1
[3] Exception error
54640 SKBLauncherDlg.cpp [0] SKBLauncher An exceptional error such as insufficient memory Restart the PC. If this occurs again, contact the head
[1] CSKBLauncherDlg::ChangeDrive() occurred. office.
[2] ChangeDrive-1
[3] Exception error
54640 SKBLauncherDlg.cpp [0] SKBLauncher Failed in reading in the bitmap of the [RisOrderUSB] Contact the head office.
[1] CSKBLauncherDlg::SetBitmap() button.
[2] SetBitmap-6
[3] SKBRisUSBPwd Bitmap Set
Error
54640 SKBLauncherDlg.cpp [0] SKBLauncher Failed in reading in the bitmap of the [Safely remove] Contact the head office.
[1] CSKBLauncherDlg::SetBitmap() button for the USB flash drive.
[2] SetBitmap-7
[3] SKBHotPlug Bitmap Set Error
59001 FFEifPrinter System call has failed. [%1] An error returned upon a WIN32 API function call. It is Restart.
conceivable that the system was unstable.
59005 FFEifPrinter Unable to setup timers. [%1] An unknown timer event occurred. It is conceivable Restart.
that the system was unstable.
59100 FFQCMsgBox FF32 Error. An FF32 library (FF32.dll) return value error It is possible that the registry information has not been
[File Name] (irreplaceable). installed correctly. Perform a reinstallation.
[Function Name] [59100]
59102 FFQCMshBox Cant get Tag Information. [File No value is set up for the tag information even though Perform reexposure because the image is illegal.
Name] it must have been set up accordingly (irreplaceable).
[Function Name] [59102]
59103 FFQCMsgBox Memory or Resource cannot be Failed in obtaining memory/handle resource. Increase available resources and then retry.
gained.
[File Name]
[Function Name] [59103]
59198 FFQCMsgBox Secondary detection code Error. A secondary detection code return value error.
[File Name]
[Function Name] [59198]
59701 FFIIPDicomQR Logical Program Error. Exception An exceptional error occurred. Processing can be If the same error still recurs, restart the system.
has Occurred. %n[Module] %1 continued because it is insignificant.
%n[Function] %2 %n[SpotCode]
%3 %n[Ret]%4 %n[Description]
%5

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-146
Appendix A CL Error Message Table Appx MT A-147
Event Event Source Description Causes Remedies Remarks
59702 FFIIPDicomQR Logical Program Error. Not The error that occurred is unsupported though it is If the same error still recurs, restart the system.
Supported Case. %n[Module] %1 within the supposed range. Processing cannot be
%n[Function] %2 %n[SpotCode] continued because it is insignificant.
%3 %n[Ret]%4 %n[Description]
%5
59751 FFIIPDicomQR Catch Exception Error. %n%1 %n An exceptional error occurred unexpectedly. Restart the system.
%2
59761 FFTsSearchCondition Catch Exception Error. %n An exceptional error occurred unexpectedly. Restart the system.
59762 FFTsSearchCondition Out Of Memory Error. %n An error occurred, which disabled the memory to be Restart the system.
secured appropriately.
59763 FFTsSearchCondition Free Memory Error. %n An error occurred, which disabled the memory to be Restart the system.
released appropriately.
59771 FFMaSearchCOM Catch Exception Error. %n An unexceptional error occurred unexpectedly. Restart the system.
59772 FFMaSearchCOM Out Of Memory Error. %n An error occurred, which disabled the memory to be Restart the system.
secured appropriately.
59773 FFMaSearchCOM Free Memory Error. %n An error occurred, which disabled the memory to be Restart the system.
released appropriately.
59774 FFMaSearchCOM Data Base Error. %n A database error occurred. Restart the system if the relevant processing has
been completed.
If the relevant processing remains unprocessed,
there may be an illegal study in the server targeted
for search of data. In this case, no particular remedial
measures need to be taken.
59801 FFIIPDicomQR Catch Exception Error. %n%1 %n An exceptional error occurred unexpectedly. Restart the system.
%2
59802 FFIIPDicomQR Invalid Propaty Error. %n%1 %n Illegal properties (AddIndicationMethod only). Restart the system.
%2
59811 FFTsImgRetInd Catch Exception Error. %n An exceptional error occurred unexpectedly. Restart the system.
59812 FFTsImgRetInd Out Of Memory Error. %n An error occurred, which disabled the memory to be Restart the system.
secured appropriately.
59813 FFTsImgRetInd Free Memory Error. %n An error occurred, which disabled the memory to be Restart the system.
released appropriately.
59821 FFMaRetrieve Catch Exception Error. %n An exceptional error occurred unexpectedly. Restart the system.
59822 FFMaRetrieve Out Of Memory Error. %n An error occurred, which disabled the memory to be Restart the system.
secured appropriately.
59823 FFMaRetrieve Free Memory Error. %n An error occurred, which disabled the memory to be Restart the system.
released appropriately.
59824 FFMaRetrieve Process Communication Error. %n An error occurred in the communication control. Restart the system.
59825 FFMaRetrieve Retrieve Process Exists. %n A process was started double. Restart the system.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-147
Appendix A CL Error Message Table Appx MT A-148
Event Event Source Description Causes Remedies Remarks
59826 FFMaRetrieve Image is Already Exists in Image input is disabled because the same image Restart the system.
ImageDB. %n already exists in the image database.
59827 FFMaRetrieve File Error. %n A file error occurred. Restart the system.
59828 FFMaRetrieve NetWork Error. %n The association was disconnected due to a network Restart the system.
error.
59829 FFMaRetrieve Cannot Get NetWork Setting. %n Necessary network settings cannot be acquired. Restart the system.
59830 FFMaRetrieve DICOM Retrieve Timeout. %n A timeout error occurred in an attempt to acquire a Restart the system.
study.
59831 FFMaRetrieve DICOM Retrieve is Not Able to DICOM acquisition processing is not available at Restart the system.
Use Now. %n present.
59832 FFMaRetrieve Processing Image is Deleted. %n Processing is disabled because the image was Restart the system.
deleted.
59851 FFMaCommon Catch Exception Error. %n An exceptional error occurred unexpectedly. Restart the system.
59852 FFMaCommon Out Of Memory Error. %n An error occurred, which disabled the memory to be Restart the system.
secured appropriately.
59853 FFMaCommon Free Memory Error. %n An error occurred, which disabled the memory to be Restart the system.
released appropriately.
59855 FFMaCommon Catch Exception Error. %n An exceptional error occurred unexpectedly. Restart the system.
59856 FFMaCommon Out Of Memory Error. %n An error occurred, which disabled the memory to be Restart the system.
secured appropriately.
59857 FFMaCommon Free Memory Error. %n An error occurred, which disabled the memory to be Restart the system.
released appropriately.
59861 FFMaCommonImage Catch Exception Error. %n An exceptional error occurred unexpectedly. Restart the system.
59862 FFMaCommonImage Out Of Memory Error. %n An error occurred, which disabled the memory to be Restart the system.
secured appropriately.
59863 FFMaCommonImage Free Memory Error. %n An error occurred, which disabled the memory to be Restart the system.
released appropriately.
59871 FFTsCommon Catch Exception Error. %n An exceptional error occurred unexpectedly. Restart the system.
59872 FFTsCommon Out Of Memory Error. %n An error occurred, which disabled the memory to be Restart the system.
secured appropriately.
59873 FFTsCommon Free Memory Error. %n An error occurred, which disabled the memory to be Restart the system.
released appropriately.
59900 FFIIPImgProcServer Exception Error.%n%1 An exceptional error occurred Reinstall the system. Image processing server
60000 FFCustomMsgBox [60000] Failed in accessing the - An apostrophe was used for exposure menu name - Upgrade the software to version A08 or later.
database. setup with the user utility when the employed - Restart. If the same symptom recurs, perform a
software version was A07 or earlier. reinstallation.
- It is conceivable that the database file is damaged
or deleted.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-148
Appendix A CL Error Message Table Appx MT A-149
Event Event Source Description Causes Remedies Remarks
60002 FFCustomMsgBox [60002] User Utility will be There is no alternative but to exit the program due to Restart. If the same symptom recurs, perform a
terminated. the occurrence of an abnormality. reinstallation.
60050 FFCustomMsgBox [60050] Failed in accessing the It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
character string database. or deleted. reinstallation.
60051 FFCustomMsgBox [60051] Failed in accessing the It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
system setting database. or deleted. reinstallation.
60052 FFCustomMsgBox [60052] Failed in obtaining the It is conceivable that the registry information was Restart. If the same symptom recurs, perform a
registry information. damaged or deleted. reinstallation.
60053 FFCustomMsgBox [60053] Value of registry It is conceivable that the registry information was Restart. If the same symptom recurs, perform a
information is abnormal. damaged or deleted. reinstallation.
60054 FFCustomMsgBox [60054] Failed in obtaining the It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
information from the character or deleted. reinstallation.
string database.
60055 FFCustomMsgBox [60055] Failed in obtaining the It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
information from the system or deleted. reinstallation.
setting database.
60056 FFCustomMsgBox [60056] Failed in obtaining the The setup file format was incorrect or the file could Check settings.
information from the system not be read.
setting file.
60057 FFCustomMsgBox [60057] Failed in setting The setup file format was incorrect or the file could Check settings.
information to the system setting not be read.
file.
60080 FFCustomMsgBox [60080] Failed in obtaining the It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
display group information. or deleted. reinstallation.
60081 FFCustomMsgBox [60081] Failed in obtaining the It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
menu information. or deleted. reinstallation.
60100 FFCustomMsgBox [60100] Failed in obtaining the It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
MPM code. or deleted. reinstallation.
60114 FFCustomMsgBox [60114] Failed in obtaining the It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
XCON parameter. or deleted. reinstallation.
60183 FFCustomMsgBox [60183] Failed in accessing the It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
technician information database. or deleted. reinstallation.
60184 FFCustomMsgBox [60184] Failed in accessing the It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
technician information database. or deleted. reinstallation.
60185 FFCustomMsgBox [60185] Failed in obtaining the It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
information from the system or deleted. reinstallation.
setting database.
60203 FFCustomMsgBox [60203] Failed in accessing the It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
requesting department information or deleted. reinstallation.
database.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-149
Appendix A CL Error Message Table Appx MT A-150
Event Event Source Description Causes Remedies Remarks
60204 FFCustomMsgBox [60204] Failed in accessing the It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
requesting department information or deleted. reinstallation.
database.
60205 FFCustomMsgBox [60205] Failed in obtaining the It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
information from the system or deleted. reinstallation.
setting database.
60215 FFCustomMsgBox [60215] Failed in accessing the It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
film annotation database. or deleted. reinstallation.
60216 FFCustomMsgBox [60216] Failed in accessing the It is conceivable that the database file was damaged Restart. If the same symptom recurs, perform a
film annotation database. or deleted. reinstallation.
60251 FFCustomMsgBox [60251] Image processing The image processing parameter data is abnormal. Check the image processing parameters.
parameter data is abnormal.
60260 FFCustomMsgBox [60260] System has not been It is conceivable that the IIP executable file was Reinstall.
rebooted. damaged or deleted.
60300 FFCustomMsgBox [60300] The option and the The menu data and the option do not agree with each Install a menu that is suited to the option.
database do not agree with each other.
other.
60301 FFCustomMsgBox [60301] Data storage resulted in a The database file may have been damaged or Restart. If the same symptom recurs, perform a
failure. deleted. reinstallation.
60302 FFCustomMsgBox [60302] Failed in deleting image The database file may have been damaged or Reinstall. If the same symptom recurs, perform a
data. deleted. reinstallation.
61060 FFCustomMsgBox [61060] Wrong password has An incorrect password was entered. The password is fixed at “**** ”.
been input.
61082 FFCustomMsgBox [61082] No menu has been An attempt was made to start an editing or like Complete a menu selection before initiating an editing
selected. operation without selecting any menu. or like operation.
61083 FFCustomMsgBox [61083] Already registered for The menu could not be deleted because it was Clear the registration for display and then delete the
displaying and cannot be deleted. registered for display. menu.
61084 FFCustomMsgBox [61084] Already registered to The menu could not be deleted because it was Remove the target menu from the examination menu
the study menu and cannot be registered for the examination menu. in advance.
deleted.
61085 FFCustomMsgBox [61085] No menu was registered A certain display group was empty because no menu No empty display group is allowed to exist. Register
for a certain display group. was registered for it. one or more menus for the display group or delete the
display group.
61090 FFCustomMsgBox [61090] Invalid character has been The entered data was abnormal due, for instance, to Make a proper entry.
input in the display group name. the inclusion of an unacceptable character.
61093 FFCustomMsgBox [61093] Display group will be This window opens for confirmation only.
deleted.
61094 FFCustomMsgBox [61094] Display group name is The entered data was abnormal due, for instance, Make a proper entry.
illegal. to its excessive length or the inclusion of an
unacceptable character.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-150
Appendix A CL Error Message Table Appx MT A-151
Event Event Source Description Causes Remedies Remarks
61103 FFCustomMsgBox [61103] Same extension menu The entered data value was already registered or Enter another value.
code already exists. otherwise unacceptable.
61106 FFCustomMsgBox [61106] Same ANK exposure The entered data value was already registered or Enter another value.
menu name already exists. otherwise unacceptable.
61109 FFCustomMsgBox [61109] Same kanji-exposure The entered data value was already registered or Enter another value.
menu name already exists. otherwise unacceptable.
61110 FFCustomMsgBox [61110] Extension menu code is The entered data was abnormal due, for instance, Make a proper entry.
illegal. to its excessive length or the inclusion of an
unacceptable character.
61111 FFCustomMsgBox [61111] ANK exposure menu name The entered data was abnormal due, for instance, Make a proper entry.
is illegal. to its excessive length or the inclusion of an
unacceptable character.
61112 FFCustomMsgBox [61112] Kanji-exposure menu The entered data was abnormal due, for instance, Make a proper entry.
name is illegal. to its excessive length or the inclusion of an
unacceptable character.
61122 FFCustomMsgBox [61122] MPM code is illegal. The entered data was abnormal due, for instance, Make a proper entry.
to its excessive length or the inclusion of an
unacceptable character.
61125 FFCustomMsgBox [61125] Same film annotation The entered data value was already registered or Enter another value.
already exists. otherwise unacceptable.
61130 FFCustomMsgBox [61130] Device code is illegal. The entered data was abnormal due, for instance, Make a proper entry.
to its excessive length or the inclusion of an
unacceptable character.
61131 FFCustomMsgBox [61131] Film-related code is illegal. The entered data was abnormal due, for instance, Make a proper entry.
to its excessive length or the inclusion of an
unacceptable character.
61132 FFCustomMsgBox [61132] Auto-exposure mechanism The entered data was abnormal due, for instance, Make a proper entry.
is illegal. to its excessive length or the inclusion of an
unacceptable character.
61142 FFCustomMsgBox [61142] Same study menu code The entered data value was already registered or Enter another value.
already exists. otherwise unacceptable.
61145 FFCustomMsgBox [61145] Same ANK study menu The entered data value was already registered or Enter another value.
name already exists. otherwise unacceptable.
61148 FFCustomMsgBox [61148] Same kanji-study menu The entered data value was already registered or Enter another value.
name already exists. otherwise unacceptable.
61149 FFCustomMsgBox [61149] No exposure menu has An attempt was made to start an editing or like Complete a menu selection before initiating an editing
been selected. operation without selecting any menu. or like operation.
61151 FFCustomMsgBox [61151] Exposure menu cannot be The maximum permissible number of menu Delete any unnecessary menu.
registered. registrations was exceeded.
61152 FFCustomMsgBox [61152] Same exposure menu has The entered data value was already registered or Enter another value.
already been registered. otherwise unacceptable.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-151
Appendix A CL Error Message Table Appx MT A-152
Event Event Source Description Causes Remedies Remarks
61153 FFCustomMsgBox [61153] Study menu code is The entered data was abnormal due, for instance, Make a proper entry.
illegal. to its excessive length or the inclusion of an
unacceptable character.
61154 FFCustomMsgBox [61154] ANK study menu code is The entered data was abnormal due, for instance, Make a proper entry.
illegal. to its excessive length or the inclusion of an
unacceptable character.
61155 FFCustomMsgBox [61155] Kanji-study menu code is The entered data was abnormal due, for instance, Make a proper entry.
illegal. to its excessive length or the inclusion of an
unacceptable character.
61171 FFCustomMsgBox [61171] No technician code has An attempt was made to register data with an input Enter a value.
been input. field left blank.
61172 FFCustomMsgBox [61172] Technician code is illegal. The entered data was abnormal due, for instance, Make a proper entry.
to its excessive length or the inclusion of an
unacceptable character.
61173 FFCustomMsgBox [61173] Invalid character has been An unacceptable character was contained. Make a proper entry.
input in the technician code.
61174 FFCustomMsgBox [61174] Same technician code The entered data value was already registered or Enter another value.
already exists. otherwise unacceptable.
61175 FFCustomMsgBox [61175] No ANK technician name An attempt was made to register data with an input Enter a value.
has been input. field left blank.
61176 FFCustomMsgBox [61176] ANK technician name is The entered data was too long. Make a proper entry.
too long.
61177 FFCustomMsgBox [61177] Invalid character has been An unacceptable character was contained. Make a proper entry.
input in the ANK technician name.
61178 FFCustomMsgBox [61178] Same ANK technician The entered data value was already registered or Enter another value.
name already exists. otherwise unacceptable.
61179 FFCustomMsgBox [61179] No kanji-technician name An attempt was made to register data with an input Enter a value.
has been input. field left blank.
61180 FFCustomMsgBox [61180] Kanji-technician name is The entered data was too long. Make a proper entry.
too long.
61181 FFCustomMsgBox [61181] Invalid character has been An unacceptable character was contained. Make a proper entry.
input in the kanji-technician name.
61182 FFCustomMsgBox [61182] Same kanji-technician The entered data value was already registered or Enter another value.
name already exists. otherwise unacceptable.
61191 FFCustomMsgBox [61191] No requesting department An attempt was made to register data with an input Enter a value.
code has been input. field left blank.
61192 FFCustomMsgBox [61192] Requesting department The entered data was too long. Make a proper entry.
code is too long.
61193 FFCustomMsgBox [61193] Invalid character has been An unacceptable character was contained. Make a proper entry.
input in the requesting department
code.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-152
Appendix A CL Error Message Table Appx MT A-153
Event Event Source Description Causes Remedies Remarks
61194 FFCustomMsgBox [61194] Same requesting The entered data value was already registered or Enter another value.
department code already exists. otherwise unacceptable.
61195 FFCustomMsgBox [61195] No ANK requesting An attempt was made to register data with an input Enter a value.
department name has been input. field left blank.
61196 FFCustomMsgBox [61196] ANK requesting The entered data was too long. Make a proper entry.
department name is too long.
61197 FFCustomMsgBox [61197] Invalid character has An unacceptable character was contained. Make a proper entry.
been input in the ANK requesting
department name.
61198 FFCustomMsgBox [61198] Same ANK requesting The entered data value was already registered or Enter another value.
department name already exists. otherwise unacceptable.
61199 FFCustomMsgBox [61199] No kanji-requesting An attempt was made to register data with an input Enter a value.
department name has been input. field left blank.
61200 FFCustomMsgBox [61200] Kanji-requesting The entered data was too long. Make a proper entry.
department name is too long.
61201 FFCustomMsgBox [61201] Invalid character has The entered data value was already registered or Make a proper entry.
been input in the Kanji-requesting otherwise unacceptable.
department name.
61202 FFCustomMsgBox [61202] Same kanji-requesting The entered data value was already registered or Enter another value.
department name already exists. otherwise unacceptable.
61211 FFCustomMsgBox [61211] No film annotation An attempt was made to register data with an input Enter a value.
characters have been input. field left blank.
61212 FFCustomMsgBox [61212] Film annotation characters The entered data was too long. Make a proper entry.
are too long.
61213 FFCustomMsgBox [61213] Invalid character has An unacceptable character was contained. Make a proper entry.
been input in the film annotation
characters.
61214 FFCustomMsgBox [61214] Same film annotation The entered data value was already registered or Enter another value.
already exists. otherwise unacceptable.
61224 FFCustomMsgBox [61224] Drive is not ready. No FD was inserted into the FDD. Insert an FD.
61234 FFCustomMsgBox [61234] Drive is not ready. No FD was inserted into the FDD. Insert an FD.
61235 FFCustomMsgBox [61235] Wrong disk A wrong FD was inserted into the FDD. Insert a correct FD.
61236 FFCustomMsgBox [61236] Wrong disk A wrong FD was inserted into the FDD. Insert a correct FD.
61300 FFCustomMsgBox [61300] Backup processing The database file may have been damaged or Restart. If the same symptom recurs, perform a
resulted in a failure. deleted. reinstallation.
61301 FFCustomMsgBox [61301] Restore processing The database file may have been damaged or Restart. If the same symptom recurs, perform a
resulted in a failure. deleted. reinstallation.
61302 FFCustomMsgBox [61302] An error of unknown Some errors can be occurred when the USB media is If write protection is enabled for the USB flash drive,
cause occurred. initialized. disable it and reconnect the USB flash drive.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-153
Appendix A CL Error Message Table Appx MT A-154
Event Event Source Description Causes Remedies Remarks
61303 FFCustomMsgBox [61303] Failed in importing the The problem is attributable, for instance, to a Prepare a consumables database again.
consumables database. damaged file.
61340 FFCustomMsgBox [61340] A file backed up with An attempt was made to restore a backup made by To restore to the IIP, use a backup file generated by
another application cannot be the Viewer for use with the IIP or to restore a backup the IIP. To restore to the Viewer, use a backup file
restored. made by the IIP for use with the Viewer. generated by the Viewer.
61341 FFCustomMsgBox [61341] This is not a contrast A file other than Supply.mdb was selected for an Select a Supply.mdb file.
medium database file. import.
61342 FFCustomMsgBox [61342] No backup files exist. Specified drive or folder can be incorrect. Specify a correct destination for data backup.
64220 FFCustomMsgBox [64220] Backup is interrupted. This window opens for confirmation only.
64221 FFCustomMsgBox [64221] Backup is completed. This window opens for confirmation only.
64222 FFCustomMsgBox [64222] Backup is being prepared. This window opens for confirmation only.
64223 FFCustomMsgBox [64223] Insert FD. This window opens for confirmation only.
64230 FFCustomMsgBox [64230] Restoring is interrupted. This window opens for confirmation only.
64231 FFCustomMsgBox [64231] Restoring is completed. This window opens for confirmation only.
64232 FFCustomMsgBox [64232] Being restored. This window opens for confirmation only.
64233 FFCustomMsgBox [64233] Insert FD. This window opens for confirmation only.
64237 FFCustomMsgBox [64237] Insert FD. This window opens for confirmation only.
64250 FFCustomMsgBox [64250] Parameter Batch Updating This window opens for confirmation only.
64313 FFCustomMsgBox [64313] Unable to obtain system The setup file format is not correct or cannot be read. Check settings.
configuration of the target
destination for image data transfer.
64314 FFCustomMsgBox [64314] Unable to obtain system The setup file format is not correct or cannot be read. Check settings.
configuration.
64460 FFCustomMsgBox [64460] File extension is not The MPM code has reached its limit. Allot existing MPM code or use extended MPM code.
possible because the MPM code
has reached its limit for extension.
64591 UserUtility\frmMediaStorage. [64591] Writing data onto media The USB flash drive might have been write-protected Release the write-protection and execute the process
frm was disabled. at the time of initialization. again.
64595 FFCustomMsgBox [64595] Failed in launching Ascent The linking application is not installed correctly. Reinstall the linking application.
View setting window.
70000 FFCustomMsgBox [70000] Failed in conversion It is possible that the RetakeAnalyisData.mdb file is Open the RetakeAnalysisData.mdb file properties to
of mis-exposure image log write-protected. check to see if it is write-protected.
information.
70001 FFCustomMsgBox [70001] Failed in deletion of log It is possible that the RetakeAnalyisData.mdb file is Open the RetakeAnalysisData.mdb file properties to
files. write-protected. check to see if it is write-protected.
70002 FFCustomMsgBox [70002] Failed in accessing the It is possible that the file is damaged or deleted. Restart the system. If the same symptom recurs,
definition file. perform a reinstallation.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-154
Appendix A CL Error Message Table Appx MT A-155
Event Event Source Description Causes Remedies Remarks
70005 FFCustomMsgBox [70005] Connection to the It is possible that the database file is damaged or Restart the system. If the same symptom recurs,
system setting database resulted deleted. perform a reinstallation.
unsuccessful.
70006 FFCustomMsgBox [70006] Failed in acquiring It is possible that the database file is damaged or Restart the system. If the same symptom recurs,
information from the system deleted. perform a reinstallation.
setting database.
70007 FFCustomMsgBox [70007] Connection to the It is possible that the database file is damaged or Restart the system. If the same symptom recurs,
character string database resulted deleted. perform a reinstallation.
unsuccessful.
70008 FFCustomMsgBox [70008] Failed in acquiring It is possible that the database file is damaged or Restart the system. If the same symptom recurs,
information from the character deleted. perform a reinstallation.
string database.
70009 FFCustomMsgBox [70009] Failed in acquiring registry It is possible that the registry information is damaged Restart the system. If the same symptom recurs,
information. or deleted. perform a reinstallation.
70010 FFCustomMsgBox [70010] Failed in writing registry It is possible that the registry information is damaged Restart the system. If the same symptom recurs,
information. or deleted. perform a reinstallation.
70011 FFCustomMsgBox [70011] Failed in acquiring It is possible that the database file is damaged or Restart the system. If the same symptom recurs,
technologist information. deleted. perform a reinstallation.
70012 FFCustomMsgBox [70012] Failed in acquiring It is possible that the database file is damaged or Restart the system. If the same symptom recurs,
classifications of mis-exposure deleted. perform a reinstallation.
images.
70013 FFCustomMsgBox [70013] Failed in acquiring It is possible that the database file is damaged or Restart the system. If the same symptom recurs,
comments on mis-exposure deleted. perform a reinstallation.
images.
70014 FFCustomMsgBox [70014] Connection to the log It is possible that the database file is damaged or Restart the system. If the same symptom recurs,
information database resulted deleted. perform a reinstallation.
unsuccessful.
70015 FFCustomMsgBox [70015] Failed in acquiring It is possible that the database file is damaged or Restart the system. If the same symptom recurs,
information for setup of mis- deleted. perform a reinstallation.
exposure image analysis.
70016 FFCustomMsgBox [70016] Failed in reading image It is possible that the image file is damaged or Although the image file in question is not displayed,
files. deleted. there are no problems with other operations.
70017 FFCustomMsgBox [70017] Failed in displaying An error occurred while in image processing. Restart the system. If the same symptom recurs,
images. perform a reinstallation.
70019 FFCustomMsgBox [70019] Failed in conversion of The date display format may have been input Input in a correct format.
date format. incorrectly.
70020 FFCustomMsgBox [70020] Failed in storage of the This error is displayed when a failure occurred in data Retry data store. If the same symptom recurs, change
mis-exposure image log list. storage. the destination for storage accordingly.
70021 FFCustomMsgBox [70021] Failed in storage of the This error is displayed when a failure occurred in data Retry data storage. If the same symptom recurs,
calculation result. storage. change the destination for storage accordingly.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-155
Appendix A CL Error Message Table Appx MT A-156
Event Event Source Description Causes Remedies Remarks
70022 FFCustomMsgBox [70022] An error occurred while an It is possible that the image display control or image Restart the system. If the same symptom recurs,
image is being displayed. file has a problem. perform a reinstallation.
70023 FFCustomMsgBox [70023] An unknown error The system was unstable. Restart the system. If the same symptom recurs,
occurred. perform a reinstallation.
70024 FFCustomMsgBox [70024] Connection to the It is possible that the database file is damaged or Restart the system. If the same symptom recurs,
database of regions to be exposed deleted. perform a reinstallation.
resulted unsuccessful.
70025 FFCustomMsgBox [70025] Connection to the It is possible that the database file is damaged or Restart the system. If the same symptom recurs,
database of causes of mis- deleted. perform a reinstallation.
exposure images resulted
unsuccessful.
70026 FFCustomMsgBox [70026] Failed in calculation of the The system was unstable. Restart the system. If the same symptom recurs,
mis-exposure image log. perform a reinstallation.
70027 FFCustomMsgBox [70027] Failed in displaying The system was unstable. Restart the system. If the same symptom recurs,
calculation result of the mis- perform a reinstallation.
exposure image log.
70028 FFCustomMsgBox [70028] Connection to the It is possible that the database file is damaged or Restart the system. If the same symptom recurs,
network setting database resulted deleted. perform a reinstallation.
unsuccessful.
70029 FFCustomMsgBox [70029] Failed in acquiring It is possible that the database file is damaged or Restart the system. If the same symptom recurs,
necessary data from the network deleted. perform a reinstallation.
setting database.
70030 FFCustomMsgBox [70030] Failed in displaying the The system was unstable. Restart the system. If the same symptom recurs,
list. perform a reinstallation.
70031 FFCustomMsgBox [70031] Free hard disk space for The size of the file copied is too large to be Replace for media of large capacity, if available.
writing data is insufficient. accommodated in the media.
70032 FFCustomMsgBox [70032] Failed in deleting the mis- It is possible that the file is damaged or deleted. Restart the system. If the same symptom recurs,
exposure image log. perform a reinstallation.
70033 FFCustomMsgBox [70033] Failed in deleting the It is possible that the file is damaged or deleted. Restart the system. If the same symptom recurs,
exposure result log. perform a reinstallation.
70034 FFCustomMsgBox [70034] Failed in deleting an It is possible that the file is damaged or deleted. Restart the system. If the same symptom recurs,
image file. perform a reinstallation.
70035 FFCustomMsgBox [70035] Failed in writing image It is possible that the database file is damaged or Restart the system. If the same symptom recurs,
data in the system setting deleted. perform a reinstallation.
database.
70036 FFCustomMsgBox [70036] Failed in writing image It is possible that the database file is damaged or Restart the system. If the same symptom recurs,
data in the display setting deleted. perform a reinstallation.
database.
70037 FFCustomMsgBox [70037] Failed in relocating the The system was unstable. Restart the system. If the same symptom recurs,
tree structure. perform a reinstallation.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-156
Appendix A CL Error Message Table Appx MT A-157
Event Event Source Description Causes Remedies Remarks
70038 FFCustomMsgBox [70038] Failed in reducing the tree The system was unstable. Restart the system. If the same symptom recurs,
structure. perform a reinstallation.
70039 FFCustomMsgBox [70039] Transition to the main The system was unstable. Restart the system. If the same symptom recurs,
window resulted unsuccessful. perform a reinstallation.
70040 FFCustomMsgBox [70040] Failed in accessing the It is possible that the database file is damaged or Restart the system. If the same symptom recurs,
menu database. deleted. perform a reinstallation.
70041 FFCustomMsgBox [70041] Failed in accessing the It is possible that the database file is damaged or Restart the system. If the same symptom recurs,
log information database. deleted. perform a reinstallation.
70042 FFCustomMsgBox [70042] Failed in accessing the It is possible that the database file is damaged or Restart the system. If the same symptom recurs,
system setup database. deleted. perform a reinstallation.
70043 FFCustomMsgBox [70043] Failed in storage of image It is possible that the file is damaged or deleted. It is Retry file storage. If the same symptom recurs,
data. also possible that the target media for file storage has perform a reinstallation.
problems.
94001 FFCustomMsgBox [94001] The scanner cleaning This window opens for confirmation only.
process was completed.
94002 FFCustomMsgBox [94002] The scanner cleaning Dust removal was unaccomplished due to a problem Check the RU status.
process could not be performed. on the RU side.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-157
Appendix A CL Error Message Table Appx MT A-158
BLANK PAGE

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-158
Appendix A CL Error Message Table Appx MT A-159
BLANK PAGE

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-159
Appendix A CL Error Message Table Appx MT A-160
BLANK PAGE

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx MT A-160
 SP-I

FCR-MB 201 Console

Service Manual

Service Parts (SP)

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual SP-I
 SP-II
Control Sheet
Issue date Revision number Reason Pages affected
10/29/2010 01 New release (FM5797) All pages

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual SP-II
 SP-1

1. Service Parts List n REF.NO.

A number for indicating each part in the Service Parts Exploded Views.
1.1 How to Use Service Parts List
n PART NUMBER
n RANK
A code number that is unique to each part. The rightmost letter of the code number has
m Parts handling ID symbols used to identify the parts requiring special operation the following meaning.
The ID symbols are assigned to applicable parts. Parts without the R mark are replaced
and handled in a regular manner. m For hardware
Symbol Description The letter denotes the version number of a part. If parts have different version numbers,
R Repairable parts they are upward-compatible.

Q, T Symbol for use other than in Japan m For software

The letter denotes the software specifications.
m Export regulation mark
This + mark is assigned to the parts subject to Export regulations. Parts without the +
mark are not subject to Export regulations. n PART NAME
Symbol Description
This represents the general name of a part.
+ Parts subject to Export regulations

m Fault rankings used for estimating the recommended stock quality n QTY.
All parts are assigned a symbol letter from A to E.
QTY. represents the quantity of parts used in a unit or assembly.
Symbol Description
A Consumable parts or parts that will be replaced at short intervals
Parts that may become faulty accidentally and have a relatively high failure
n REMARKS
B
rate
Unique name of a part or its relevant information or note is described in this column.
Parts that have a sufficiently long MTBF, but are expected to have a high
C
failure rate
D Parts that have a sufficiently long MTBF, but are expected to become faulty n SERIAL NUMBER
Parts that are necessary for fault analysis or parts that may be needed in
E The units may contain different parts depending on their shipment control number.
case of faults such as man-induced damage
SERIAL NUMBER indicates the shipment control number to which the parts are
applicable. If this column is blank, the parts are applicable to all the relevant units.
m RANK column description
The symbols for Fault Ranking, Parts Handling, and Export regulation are assigned in
order named. Thus, one to three letters are put in the RANK column.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual SP-1
 SP-2
n Recommended quantities of spare parts
It is recommended as a rough guide to hold in stock a specified quantity of parts
according to the rank (A to E) assigned to the parts. Parts to be replaced at periodic
intervals must be held in stock separately.
Adjust the quantity of parts stock depending on the number of working units (N) as
prescribed below.
Q: Quantity used in a single system

mN=1
Rank A = 1 + Q × 0.3
Rank C = 1 + Q × 0.05
Rank D = 1 + Q × 0.02

m 2 ≤ N ≤ 10
Rank A = 2 + N × Q × 0.3
Rank C = 2 + N × Q × 0.05
Rank D = 1 + N × Q × 0.02

m 11 ≤ N ≤ 300
Rank A = 3 + N × Q × 0.3
Rank C = 3 + N × Q × 0.05
Rank D = 2 + N × Q × 0.02

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual SP-2
 SP-3
1.2 Service Parts List

2
6

10 8, 9
4
3

CLP501001.ai

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual SP-3
 SP-4
PART SERIAL
RANK REF. PART NAME QTY. REMARKS
NUMBER NUMBER
C 1 814Y100414 PC 1 Main unit PC (substitution PC for repairing the main unit) Dell Optiplex 780SFF
CR 2 849Y100089 Monitor display 1 15-inch touch panel LCD (including a stylus pen) CDL1587A-2A/R
E 3 114Y2191001A Software 1 Main unit software
E 4 853Y100009 HUB Unit 1 HUB Unit FS705TX V2
E 5 136N100043 LAN Cable 2 RU-HUB-CL connection cable
E 6 138S0493 Ferrite core 2 Ferrite core (TFT - 112514N)
E 7 852N0036C Reading unit 1 BCR (available items)
E 8 852N0039A Reading unit 1 MCR-JIS (available items)
E 9 852N0040A Reading unit 1 MCR-ISO (available items)
E 10 352N100288 Panel 1 Stylus pen

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual SP-4
 SP-5
BLANK PAGE

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual SP-5
 SP-6
BLANK PAGE

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual SP-6
 PM-I

FCR-MB 201 Console

Service Manual

Preventive Maintenance (PM)

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual PM-I
 PM-II
Control Sheet
Issue date Revision number Reason Pages affected
10/29/2010 01 New release (FM5797) All pages

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual PM-II
 PM-1

1. Preventive Maintenance Items n List of preventive maintenance items

(estimated periodical maintenance cycle : 1 year)
Reference Required Replacement
While the FCR-MB 201 Console is being used, maintenance of the items listed in the section
Maintenance item
time part
Remarks
table on the right should be performed periodically while observing the warnings and
2. Checking for a Fatal Error
cautions set forth below.
2.1 Confirming the Event Log

WARNING 3. Hardware Cleaning

3.1 LCD Cleaning
To avoid electrical shock, turn OFF the equipment power before performing
maintenance work. 4. Functional Checks
Confirmation of Image Input to Storage
4.1
onto HDD
uuWARNING/CAUTIONuu 4.2 Image Output to Film [Option]

Observe the warnings and cautions set forth in the chapter titled “Safety 4.3 Image Transfer
Precautions.” 5. Backup of Settings and Verification of Date and Time
5.1 Backup of Setup Files
5.2 Verification of Date and Time
uuCAUTIONuu
When servicing the inside of the PC, be sure to wear an antistatic wristband to
ground your body.
If your body is not grounded, the static buildup on your body may damage
electronic parts on the circuit boards.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual PM-1
 PM-2

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual PM-2
 PM-3

3. Hardware Cleaning

3.1 LCD Cleaning

1. With a “Cleaner Torch”, remove dust from the LCD.

2. If there is any stubborn dirt on the panel surface, wipe it clean with a cloth
(e.g., gauze) well wrung out in water.

uuCAUTIONuu
If you vigorously scrub the LCD panel surface, the protective sheet may become
damaged. Therefore, do not apply any undue force to the LCD panel surface when
you wipe it clean.
If the LCD panel surface is heavily soiled and cannot be cleaned with a moistened
cloth, clean it with the monitor cleaner kit.
The monitor cleaner kit is of a chemical type. Therefore, if the monitor cleaner kit
is repeatedly used for cleaning purposes, the LCD panel surface will be adversely
affected. When using the monitor cleaner kit, read its operation manual and
exercise utmost care.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual PM-3
 PM-4

4. Functional Checks

4.1 Confirmation of Image Input to Storage onto HDD

See the following to perform the specified procedure.
“4.1 Checking Connection Between CL and RU, CL and X-CON” under “Installation
(IN)”

4.2 Image Output to Film

See the following to perform the specified procedure.
“4.5 Checking the Output Image” under “Installation (IN)”

4.3 Image Transfer

See the following to perform the specified procedure.
“3.2 Image Transfer to Other Connected Equipment” in “Appendix 12 DICOM CR
Storage” under “Installation – Appendix (Appx IN)”

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual PM-4
 PM-5

5. Backup of Settings and Verification of

Date and Time

5.1 Backup of Setup Files

See the following to perform the specified procedure.
“5.1 Backing Up the CL Setup Files” under “Installation (IN)”

5.2 Verification of Date and Time

See the following to perform the specified procedure.
“3.1.2 OS Setups” under “Installation (IN)”

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual PM-5
 PM-6
BLANK PAGE

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual PM-6
 IN-I

FCR-MB 201 Console

Service Manual

Installation (IN)

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual IN-I
 IN-II
Control Sheet
Issue date Revision number Reason Pages affected
10/29/2010 01 New release (FM5797) All pages

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual IN-II
 IN-1

1. Installation Procedure Overview 1. Check the CL accessories. “2. CL Hardware Setup”

➤ IMPORTANT
2. Set up the software related to the CL and “3. CL Software Setup”
Be sure that the following equipment is completely installed and set up. RU. The major procedures are indicated
Ÿ FCR-MB 201 Reader Unit below:
See Chapters 1 to 5 of “Installation” of the RU Service Manual.  Make preparations for CL-AP startup
Ÿ Other equipment (e.g., driver, option key, and AP key
installation).
See the installation instructions set forth in the respective service manuals.
 Set up the software for RU operations
(e.g., RU-AP installation).
 Set up the CL system information
➤ IMPORTANT
(e.g., hospital name).
Be sure to prepare the following before installation.  Perform CL-Config setup that is
 CD that stores CL AP key, which is distributed for service use needed for the connection of the other
 USB keyboard (JIG) equipment
 USB Mouse (JIG)
 USB flash drive (Specified *1)
 DVD/CD drive (JIG. Must be dual-layer compatible) 3. Verify the connection between the CL and “4. Checkout Procedures”
RU as well as the connections to the other
*1 Use the USB flash drive with the specification below. equipment. Also, generate film printouts to
 USB2.0 compatible check for an improper format, unevenness
 It can be installed without special driver/software. on printed films, sensitivity, density and
 It's capacity is more than 2GB. abnormal output characters.
 Password security function is available.
 No dedicated drive for security software exists.
 Password entering is required every time you connect/remove it. 4. Back up the CL and RU setup files. Also, “5. Setup File Backup, Image
check the RU error mode, and delete an Database Initialization and
u NOTES u error log after completion of the check. Error Log Verification/Deletion”
Listed below are the abbreviations adopted in this chapter.
Ÿ Application : AP
Ÿ FCR-MB 201 Console : CL
Ÿ FCR-MB 201 Reader Unit : RU
Ÿ CL configuration data : CL-Config
Ÿ RU configuration data : RU-Config
Ÿ X-Ray Controller : X-CON

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual IN-1
 IN-2

2. CL Hardware Setup 2.1 Checking the Accessories

u NOTE u Check that the following component items are fully supplied.

For installation in a hospital, see only “2.3 Connecting to Other Equipment”.

n Accessories box
 CL-AP (2 CDs)
 Standard Key Software (CD)
2.1 Checking the Accessories  Operating System Disk
 DRIVERS AND UTILITIES Disk
 USB Keyboard
2.2 Installing the Available Items
 USB Mouse

2.3 Connecting to Do not perform this procedure if n Others (separately packed items, options, available items, etc.)
Other Equipment other equipment is not used.
Description Product Code Qty. Remarks*
DICOM print key CD DX CL DICOM PRINT 1 O
Detail QA key CD IR MB201 DELUX-QA 1 O
Image composition key CD DX CL IM COMPOSITION 1 O
Annotation key CD IR MB201 ANNOTATION FOR LITE 1 O
DICOM Commitment Push key CD DX CL DICOM COMMITMENT 1 O
Shadow-masking CD key DX CL SHUTTER-PROC 1 O
Grid Pattern Removal processing key CD DX CL GPR 1 O
Image Reader QC function key CD IR MB201 QC TEST SOFT 1 O
DICOM worklist (MWM) key CD DX CL DICOM ORDER MWM 1 O
DICOM worklist (MWM) key CD
DX CL DICOM ID MWM 1 O
(patient information only)
DICOM PPS key CD DX CL DICOM MPPS 1 O
ID Online key CD IR MB201 ID ONLINE 1 O
RETAKE ANALYSIS key CD DX CL RETAKE ANALYSIS 1 O
Barcode reader IR 346 BARCODE NB 1 A
Magnetic card reader (JIS) IR 346 MCR JIS B 1 A
Magnetic card reader (ISO) IR 346 MCR ISO B 1 A

*A: Available Item, O: Option

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual IN-2
 IN-3
2.2 Installing the Available Items 2.3 Connecting to Other Equipment
1. Mount the available items on the PC.
Connect the following equipment to the FCR-MB 201 Console.
FCR-MB 201
LCD unit
l Synapse server (DICOM connection)
Power supply cable USB port
of the LCD unit See “1. Hardware Setup” under “Appendix 12 DICOM CR Storage” of “Appx IN”.

l Other manufacturer’s equipment (DICOM CR Storage connection)

AC power supply
See “1. Hardware Setup” under “Appendix 13 DICOM CR Storage: Transfer of
in FCR-MB 201 Video connector
Processed Images” of “Appx IN”.
main unit

PC
l DRYPIX (DICOM Print)

Power supply cable Barcode reader See “1. Hardware Setup” under “Appendix 14 DICOM Print” of “Appx IN”.
of the PC (Available item)
l RIS server (DICOM MWM/PPS connection)
Magnetic card reader See “1. Hardware Setup” under “Appendix 15 RIS:DOCOM MWM/DICOM PPS”
X-CON
(Available item) of “Appx IN”.

l IDC4 (ID Online)

Serial port JIG
(Keyboard, Mouse, See “1. Hardware Setup” under “Appendix 18 IDC4:ID Online” of “Appx IN”.
USB port DVD/CD drive, etc.)
l Synapse Server (Web Query)
See “1. Hardware Setup” under “Appendix 20 Synapse Server (Web Query)” of
MBCL730001.ai
“Appx IN”.

l DAP (Dose-area Product Meter)

See “1. Hardware Setup” under “Appendix 22 DAP (Dose-area Product Meter)”
of “Appx IN”.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual IN-3
 IN-4

3. CL Software Setup 3.1 CL-AP Startup

Start up the CL-AP following the workflow below:
3.1 CL-AP Startup
3.1.1 OS Startup

3.1.2 OS Setups
3.2 Setup for the CL with
the Service Utility 3.1.3 Touch Panel Monitor Setups /
Operational Verification

3.3 Setup for Addition of 3.1.4 Option Key Installation

Descriptive Characters to Icons
[Applicable only in Japan]
3.1.5 AP Key Installation

3.1.6 CL Startup Verification

3.4 CL Settings for
Connection to Other Equipment

➥ REFERENCES

3.5 Barcode Reader/Magnetic Card The following CL-PC setups and software installation steps are completed at factory prior
Reader Connection to shipment:
Ÿ CL IP address (172.16.1.20)
Ÿ Subnet mask (255.255.0.0)
3.6 Setup for RU Connection Ÿ CL host name (TAxxxxxxxx: 8 lowest digits of a manufacturer’s serial number in the
xxxxxxxx position)
Ÿ Administrator password setup (**** )
Ÿ Display setup (screen saver, screen resolution, etc.)
Ÿ MS-IME setup (only for units used in Japan)
Ÿ CL-AP (including Database Management System) installation
Ÿ Standard Key Software installation
Ÿ AP key installation
Ÿ RU PC-TOOL installation of FCR-MB 201 Reader Unit
Ÿ Image database initialization
Ÿ FCR-MB 201 Reader Unit setup (CL and RU setup is completed)
Ÿ DRYPIX setup (CL)
Ÿ Media Storage setup
Ÿ Wake on LAN setting

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual IN-4
 IN-5
3.1.1 OS Startup 2. Enter the user name and password, clock [Log-in].
Ÿ User name : 11111
1. Turn ON the Mobile X-ray Unit power. Ÿ Password : ****
 The CL opening window appears on the display. The Log-in window opens.  The Registration window opens.

CLP74010.EPS

u NOTE u OE000099.EPS

If the current date of PC is older than the previous startup date, the following window 3. Make sure that the CL-AP is up and running properly.
is displayed.
Click “OK”, and set the correct date at the “Date/Time Properties” window.
4. Click in the menu.

5. Hold down the <Shift> key and click .

CLP401002.EPS
 The system returns to the desktop screen.

When the window is displayed, there may be out of battery.

u NOTE u
Check it the date by following procedure.
1. Set the current date and time. For technologist registration, the user will do it after completing the installation work.
2. Shut down the PC. If you are asked to do it by the user, perform it after completing the installation work.
3. After several minutes, turn ON the Mobile X-ray Unit power.
4. Confirm the setting of date. If the setting of date does not recover, change the battery
of the PC.

➥ REFERENCES
When you turn ON the Mobile X-ray Unit power, the Image Reader automatically
starts by the setting Wake On LAN.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual IN-5
 IN-6
3.1.2 OS Setups
Set the date, the time, and the time zone.

1. Select “Control Panel” from the menu.

 The “Control Panel” window opens.

2. Double-click .

 The “Date and Time” window opens.

3. Verify the date and time.

If the date and time indicated are incorrect, correct them accordingly and
then click .

DXL74001.ai

4. Click .

 The system returns to the “Control Panel” window.

5. Close the “Control Panel” window.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual IN-6
 IN-7
3.1.3 Touch Panel Monitor Setups / Operational Verification n Checking the contrast and brightness settings
Set the touch panel monitor and verify its operation. Check the contrast and brightness of the display.

u NOTE u
n Verifying Touch Panel
The shapes and names of the icons may differ depending on the version of Intel GMA.
Verify the following operation of the touch panel. When a different version of Intel GMA is installed, perform necessary operations reading
the names in the following procedures for it accordingly.

1. Touch at the upper right corner of the window.

1. Select “Control Panel” from the menu.
 The luncher window opens.
 The “Control Panel” window opens.

2. Touch on the luncher.

 Soft keyboard opens.

2. Double-click .

 The “Intel(R) Graphics Media Accelerator Driver” window opens.

3. Double touch on soft keyboard.

3. Select “Color Enhancement”.

 The Windows Start menu opens.

4. Check the set up data is as follows.

4. Touch the date at the lower right corner of the window.
Ÿ gamma : 1.0
 The “Date/Time Properties” window opens.
○ gamma correction Ÿ brightness : 0
Ÿ contrast : 50
5. Touch “OK”. ○ color “All Colors” selected
 The system returns to the desktop screen.

5. Close the “Intel(R) Graphics Media Accelerator Driver” window.

 The system returns to the “Control Panel” window.

6. Close the “Control Panel” window.

 The system returns to the desktop screen.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual IN-7
 IN-8
3.1.4 Option Key Installation The installation procedure is described below.
The same installation procedure applies to all the option keys.
The following option keys are available. Install necessary option keys in compliance with For the option key uninstallation procedure, see “Appendix 8 Uninstalling the APs”
the CL installation specifications. under “Appx IN”.

Function Product Code Description

1. Connect the USB CD/DVD drive (JIG) to a USB port of the Mobile X-ray Unit.
Print output DX CL DICOM PRINT DICOM Print function
Image storage
DX CL DICOM COMMITMENT
Function assuring that an image has surely 2. Insert an option key CD into the DVD/CD drive.
assurance been stored in the archiver unit.  The installation start window automatically opens in several seconds.
QA function IR MB201 DELUX-QA QA QA function addition * 1
u NOTE u
DX CL IM COMPOSITION Image composition In case the installation start window does not open automatically, double-click the
IR MB201 ANNOTATION Annotation function execution file (Filename extension: exe) in the CD.
Image processing FOR LITE
DX CL SHUTTER-PROC Shuttering processing
DX CL GPR Grid Pattern Removal processing function
DX CL DICOM ORDER MWM DICOM worklist function
CLP74011.EPS
DICOM worklist function
Acquisition of DX CL DICOM ID MWM
(acquiring only patient information)
patient information
DX CL DICOM MPPS DICOM PPS function *2 3. Click .

IR MB201 ID ONLINE ID Online function

 A window opens to indicate the completion of installation.
Function for storage/calculation of The indication varies
DX CL RETAKE ANALYSIS
Other exposure/mis-exposure image information. with the option key
IR MB201 QC TEST SOFT Image Reader QC function for installation.

*1 When “IR MB201 DELUX-QA” is installed, all the QA functions are made available.
If it is not installed, only a limited number of QA functions available.
*2 This option can be used only by combining it with “DX CL DICOM ORDER MWM” or
“DX CL DICOM ID MWM”.
CLP74009.EPS

4. Click .

 The system returns to the desktop screen.

5. Remove the CD from the DVD/CD drive.

6. To install other optional keys, replace the CD and repeat steps 2. to 4.

above.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual IN-8
 IN-9
3.1.5 AP Key Installation 3.1.6 CL Startup Verification
Verify the normal startup of the CL.
u NOTE u After the completion of startup verification, exit the AP.
Install the AP key after all optional keys have been installed accordingly.
This is because once an optional key is installed, the AP key becomes invalidated 1. From the menu, sequentially select “All Programs”, “Fuji Film”
requiring thus the AP key to be reinstalled. and “FCR”.
 The CL opening window appears on the display. After about two minutes, the Log-in
1. Insert the AP key CD into the DVD/CD drive. window opens.
 After a while, the installation start window automatically opens.
2. Enter the user name and password, clock [Log-in].
u NOTE u Ÿ User name : 11111
In case the installation start window does not open automatically, double-click the Ÿ Password : ****
execution file (Filename extension: exe) in the CD.  The CL-AP starts up.

IN000007.EPS

2.
OE000099.EPS

Click . u NOTE u
If the above window does not open or an error display appears, note the displayed
 A window opens to indicate the completion of installation. error code and the applicable remedy, and then make necessary corrections to
achieve AP startup.
See “1. Error Code Table” in “Machine Troubleshooting (MT)”.

3. Click in the menu.

00000419.EPS

 The exit window opens.

3. Click .
4. Hold down the <Shift> key and click .
 The system returns to the desktop screen.
 The CL-AP exits and the system returns to the desktop screen.

4. Remove the CD from the DVD/CD drive. ➥ REFERENCE

To shut down both the CL-AP and Windows, click [OK] without pressing the <Shift>
key.
To shut down the CL-AP only, click [OK] while holding down the <Shift> key.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual IN-9
 IN-10
3.2 Setup for the CL with the Service Utility 3.2.1 Starting the Service Utility

Follow the workflow below to perform settings for the CL using the Service Utility. 1. Click and then sequentially choose “All Programs”, “Fuji Film”,
and “FCR”.
3.2.1 Starting the Service Utility
 The CL-AP starts up.

3.2.2 CL System Information Setup 2. Within a few seconds after the initial window opens,
sequentially click the upper left and upper right corners of the window.
Click the upper left corner and then the upper right corner.
3.2.3 Optimizing the Monitor Display

3.2.4 Changing the Menu Database

MU000022.EPS

 The window for entering the password opens.

MU000035.EPS

➥ REFERENCE
If you cannot complete step 2 from the initial window within a 3-second period and
allow the AP to start up, perform the following steps to start the Service Utility:
1. To exit the AP, choose “Shut Down” from the menu.
2. Click while holding down the <Shift> key.
3. From the “Start” menu, sequentially choose “All Programs”, “Fuji Film”, and “FCR”.
4. When the initial window opens, sequentially click its upper left and upper right
corners within a period of 3 seconds.

3. Enter “**** ”, and click .

 The Service Utility starts. The “IIP Service Utility” window opens.

00000404.EPS

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual IN-10
 IN-11
3.2.2 CL System Information Setup 4. Enter setup data as directed below.

Complete setup concerning CL system information and IDT functionality as directed in ¦ Make a date format selection by double-clicking for
this section.
.

n Setting the system information  0: Japanese date (S62.10.07) [Default]

 1: ANSI long date (1987.OCT.07)
1. From the “IIP Service Utility” window, click [Setup Configuration Item].  2: ANSI short date (1987.10.07)
 The “Setup Configuration Item” window opens.  3: American long date (OCT.07.1987)
 4: American short date (10.07.1987)
2. Click the sign within in the “Setup Configuration  5: European long date (07.OCT.1987)
Item” window.  6: European short date (07.10.1987)
u NOTE u
3. Click . Use “System Common Date Format” to specify the date format. If you change the
 The CL system information setup items appear. date format, the following items of information are changed to match the newly
selected format.
Items for CL system setup
 Date output on film
 Format for birth date input
 Date displayed by CL-AP
 Other date indications

¦ Make a hospital name entry (one-byte characters) by

double-clicking for .

u NOTE u
Use “Institute/Site Name Strings” to enter a hospital name string of one-byte
characters for use in the CL system.
The default hospital name is “FCR HOSPITAL”. Change this entry to a hospital name
00000132.EPS string of one-byte characters as defined by a specific hospital.
You can enter a string of up to 60 characters.

¦ Set the IP size unit system (inch or metric) for .

u NOTE u
Select this key to specify whether to display 35×43cm (14"×17") and 35×35cm (14"×
14") images in the inch or metric system.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual IN-11
 IN-12
¦ Use to specify the language to be used. n Setting the IDT functionality

 0: Japanese [Default]  7: Finnish  14:Polish 1. From the “Setup Configuration Item” window, click .
 1: English  8: Danish  15:Hungarian
 The IDT function setup items appear in the right-hand area of the window.
 2: German  9: Norwegian  16:Czech
 3: French  10: Korean  17:Russian IDT/Console function setup items
 4: Spanish  11: Chinese Simplified  19:Turkish
 5: Italian  12: Chinese Traditional
 6: Swedish  13: Portuguese

¦ Double-click for to enter a hospital name

(consisting of two-byte characters).

u NOTE u
Use “Institute/Site Name in Two-Byte Characters” to enter a hospital name string of
two-byte characters for use in the CL system.
The default hospital name is “ ”. Change this entry
00000160.EPS

to a hospital name string of two-byte characters as defined by a specific hospital.

You can enter a string of up to 15 two-byte characters. 2. Edit the IDT functionality setup as needed.

For details of the setup items, see “3.7 Configuration Details — 5. CSL/IDT
¦ Change as needed. FUNCTION” under “Maintenance Utility (MU)”.

 0: 1-1 [Default] 3. From the “Config (F)” menu, choose “Save”.

 1: N-N  A window opens, prompting you to confirm the setup data to be saved.
 2: N-N (Not Use IP Barcode)

5. Change the other items of system information as needed.

4. Click .

For details of other setup items, see “3.4 Configuration Details — 1. IMAGE  The system saves the setup data.
MODALITY” under “Maintenance Utility (MU)”.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual IN-12
 IN-13
n Setting the X-CON 2. Set up the following X-CON-related configuration items.

1. From the “Setup Configuration Item” window, click . Item Configuration Item Remarks X-CON
42 Timeout value Default: 3 r
 The IDT function setup items appear in the right-hand area of the window.
43 Image display caption Default: XCON ™
IDT/Console function setup items Xcon Port setting Setup not required to change.
44 –
(Default: 0)
45 Operating condition reception setting Default: Receives. ™
46 Exposure condition transmission setting Default: Transfers ™
47 Minimum tube voltage Default: 25kV ™
48 Maximum tube voltage Default: 130kV ™
49 Minimum tube current Default: 5mA ™
50 Maximum tube current Default: 450mA ™
51 Minimum irradiation time Default: 5msec ™
52 Maximum irradiation time Default: 5400msec ™
00000160.EPS 53 Minimum reserve setting Default: 0 r
54 Maximum reserve setting Default: 8000 r
Whether mAs value is recalculated or not
107 Default: Yes ™
at PPS
111 X-CON serial transfer rate Default: 4800bit r
112 Timeout value Default: 20 r
113 Timeout value Default: 20 r
Setting for output when there are no
120 Default: 1:Doesn't Output Anything ™
actual X-CON result values
142 X-CON serial transfer parity setting Default: 2 r
172 Limit value (minimum) of the Exposure uAs Default: 0 r
173 Limit value (maximum) of the Exposure uAs Default: 999999 r
™: Essential r: Changed as required.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual IN-13
 IN-14
3. Click and set up the following Printer-related configuration items.
No. Config item Meaning
Specifying whether to output film annotation
characters 2 (exposure unit information) or
Accession number.
0 : Film char 2 [default]
33 Print Film Char 2/Examination number
Outputs film annotation characters 2
(exposure unit information).
1 : Accession Number
Outputs the Accession number.

4. From the “Config (F)” menu, choose “Save”.

 A window opens, prompting you to confirm the setup data to be saved.

5. Click .

 The system saves the setup data.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual IN-14
 IN-15
n Removable Media (USB flash drive) Setting 4. Click the sign within in the “Setup Configuration
Item” window.
1. From the “Setup Configuration Item” window, click .
 The CL system information setup items appear.
5. Select the AE name (ex. IIP-MEDIA) of “MEDIA” from “THIS HOST (IIP)”.
Items for CL system setup

6. Confirm the settings displayed in the right of the window.

II

00000132.EPS

III IV
2.
CLP74008.eps

Connect the removable media (USB flash drive) to the USB port of the
I. Confirm AE name (ex. IIP-MEDIA).
Mobile X-ray Unit.
II. The Drive is set to “E:\MEDIA”.
III. The Service Class is set to “PrivateUnstandardizedCRStorage”.
3. Confirm that the following config is coincident with the software name of IV. The Transfer Syntax is set to “JPEGLossless”.
the removable media (USB flash drive) connected to the Mobile X-ray Unit.
For details on the connection, see “2.1 Setup of Removable Media Information
No Config item Meaning on the DICOM Media Storage Function” under “Appendix 16 Removable Media
E:\IMATION_DISK_MANAGER_V_a.exe (DICOM Media Storage)” of “Appx IN”.
69 USB Memory Security SoftPath
[default]

For details on the connection, see “2.3 Setting the path regarding the security 7. For any setup data changed, select “Save” from the “Config (F)” menu.
software” under “Appendix 16 Removable Media (DICOM Media Storage)” of  A window opens, prompting you to confirm the setup data to be saved.
“Appx IN”.

8. Click .

 The system saves the setup data.

9. From the “Config (F)” menu, choose “Close”.

 The system returns to the “IIP Service Utility” window.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual IN-15
 IN-16
3.2.3 Optimizing the Monitor Display 3.2.4 Changing the Menu Database
Set the LUT file as follows to optimize the image display of the monitor that is being used.
To change an exposure menu or image processing parameter, the menu database must
be replaced following individual procedures.
1. Click [LUT] on the “IIP Service Utility” window.
u NOTE u
Pay attention to the fact that exposure menu settings will revert to the default if a menu
database is replaced.

1. Set the CL-AP CD (2 of 2) into the DVD/CD drive.

 The “IIP Setup Tool” main menu automatically opens.
➥ REFERENCE
IN000115.EPS
When the window does not open, directly double-click the executable file, “Setup.
bat” in the CD.
2. Select the monitor names (model) and click .

MBCL03060001.ai

Select 2. Enter “3” and press the <Enter> key.

IN000129.eps
 The following window opens.
 The system returns to the “IIP Service Utility” window.

MBCL03060003.ai

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual IN-16
 IN-17
3. Enter “1” and press the <Enter> key. 6. Enter “1” and press the <Enter> key.
 A menu list of languages that can be installed opens.  A window opens, where whether or not to use FNC parameter (Flexible Noise
Control Processing) is to be specified.

IN0000955.EPS

7. Select an FNC parameter and press the <Enter> key.

 The message “Menu Database installation completed.” appears completing thus
changing the menu database.

8. Enter “0” and press the <Enter> key.

 The “IIP Setup Tool” exits, returning you to the desktop screen.

00000313.EPS 9. Remove the CD from the DVD/CD drive.

4. Enter the item number of the language you wish to install and press the
<Enter> key.
 The following window opens.

CLP30312.EPS

5. Enter “1” and press the <Enter> key.

 The following window opens.

MBCL070001.ai

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual IN-17
 IN-18
3.3 Setup for Addition of Descriptive Characters to 3.4 CL Settings for Connection to Other Equipment
Icons [Applicable only in Japan]
Perform necessary settings for connecting the equipment shown in the table below to the
FCR-MB 201 Console.

Connected equipment Function Ref.

HI-C655/QA-WS DICOM CR Storage Appx IN12
Other maker’s equipment DICOM CR Storage : Transfer of Processed Images Appx IN13
DRYPIX DICOM Print Appx IN14
RIS DICOM MWM / DICOM PPS Appx IN15
Removable Media Storage DICOM Media Storage Appx IN16
IDC4 ID Online Appx IN18
Synapse Server Web Query function Appx IN20
Archiver DICOM Commitment Push Appx IN21
DAP Measures Dose-area Appx IN22

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual IN-18
 IN-19
3.5 Barcode Reader/Magnetic Card Reader Connection

When using the barcode reader or magnetic card reader, perform the following connection
and setup.

l Barcode reader connection and setup

For details on the connection, see “Appendix 3 Connecting the Barcode Reader
[Available Item]” of “Appx IN”.

l Magnetic card reader connection and setup

For details on the connection, see “Appendix 4 Setting Up the Magnetic Card
[Available Item]” of “Appx IN”.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual IN-19
 IN-20
3.6 Setup for RU Connection 3.6.1 Changing the CL IP Address
This section describes the CL setup procedures for image transfer from RU to CL. The When installing the CL at an IP address setting other than 172.16.1.20, change the CL’s
setup steps to be performed are outlined below: IP address by performing the procedure specified below:

3.6.1 Changing the CL IP Address See “Appendix 7 Changing the CL IP Addresses” in “Installation – Appendix (Appx
IN)”.

u NOTE u
3.6.2 Checking Setup with
Service Utility When changing the IP address, pay attention to the netmask setting. It may be necessary
to change the netmask size depending on the IP address to be set.

3.6.3 RU Setup

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual IN-20
 IN-21
3.6.2 Checking Setup with Service Utility n Checking the equipment information (CONNECTING EQUIPMENT)
Check the RU network information and equipment information (CONNECTING
1. In the “Setup Configuration Item” window, click
EQUIPMENT) that is registered as the CL Service Utility. .

n Checking Network Information

1. Start up the CL Service Utility.

See “1. Starting/Exiting the Service Utility” in “Maintenance Utility (MU)”.

2. Click [Setup Configuration Item].

IN000083.EPS

2. Check the “Modify” window for RU information registered in the READER

00000404.EPS
settings of CONNECTING EQUIPMENT.

3. Click and then . u NOTE u

Even if you modify the RU settings registered in ALL OTHER NODES, the displayed
list will not be modified. Make sure to perform modification in the “Modify” window of
CONNECTING EQUIPMENT.

3. From “Config(F)” menu, select “Close” and then close “Setup Configuration
Item” window.

u NOTE u
When a window to save settings is displayed, to save modification, click “Yes”.

IN000071.EPS

4. Check the RU information registered as NETWORK CONFIG.

u NOTE u
Be sure to check the “IP Address” and the “HostName” of RU. CLP804001.EPS

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual IN-21
 IN-22
3.6.3 RU Setup

n Network setup for RU main unit

From the RU operation panel, set the following items of information:
Ÿ RU IP Address : RU main unit IP address.
Ÿ FTP-Serv. IP Address : FTP server IP address. The CL’s IP address should basically
be set.
Ÿ Netmask Address : Netmask.
Ÿ Gateway IP Address : Gateway’s IP address. To be set as needed.
For the setup procedure, see “Installation (IN)” of the RU Service Manuals, as
required.

n Setting up the RU PC-TOOL

Ÿ When changing the IP address of RU, use RU PC-TOOL to perform the application
installation and configuration setup procedures with RU.
Ÿ When changing the IP address of CL, use RU PC-TOOL to change the configuration
setup.

For the installation and configuration setup procedures, see “Installation (IN)” of the
RU Service Manuals, as required.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual IN-22
 IN-23

4. Checkout Procedures 4.1 Checking Connection Between CL and RU, CL and X-CON
1. Turn ON the RU power. If it is already ON, you do not have to do anything
4.1 Checking Connection Between here.
CL and RU, CL and X-CON
2. From the menu, sequentially select “All Programs”, “Fuji Film”
and “FCR”.
4.2 Checking the Data Exchange
 After about one minutes, the Log-in window opens.

4.3 Checking Output for Media

4.4 Checking the Connection

between the CL and Other CLP74010.EPS

Equipment
3. Enter the user name and password, clock [Log-in].
Ÿ User name : 11111
Ÿ Password : ****
4.5 Checking the Output Image As output image check, check the format, the
uneven image, and the film character format.  The CL-AP starts up.
 After a while, the RU initialization process begins.
The Registration window opens in about two minute.

OE000099.EPS

4. Check if an error message box is not displayed in the right of the window (or
X-CON Offline display is not in the box).

5. Set the patient's data and the exposure menu in the input window of the
patient information.
For details of input operation of patient information, see CL instructions.

6. Check both the CL-AP window lamp and the RU panel’s cassette insertion
lamp go on. Set a cassette in the cassette setting unit.
 When a certain period of time elapses after the start of an IP read process, the read
image appears on the CL monitor.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual IN-23
 IN-24
4.2 Checking the Data Exchange

Check to see that data can be exchanged with the X-CON as per configuration settings
(CSL/IDT FUNCTION).

¦ If “45. Xcon Performed Info. Reception” in Configuration “CSL/IDT FUNCTION”

is enabled:

When X-CON’s actual values, including tube voltage, tube current and irradiation
time, are received, a mark confirming the reception is displayed at the right top of the
exposure menu on the window.
Reception confirmation mark

OE000052.EPS

After the completion of exposures, X-CON’s actual values, including tube voltage,
tube current and irradiation time, will be transferred to RIS or the like via the CL (the
values can be verified also on film).

¦ If “46. Xcon Exposure Info. Transfer” in Configuration “CSL/IDT FUNCTION” is

enabled:

Setup items of the exposure menu, such as tube voltage, tube current and irradiation
time, will be reflected on the X-CON during exposures.

u NOTES u
 When your Image Reader is a cassette type machine, make sure to register the used
IP after completing the exposure processing. After receiving the actual exposure result
data, a mark appears at the moment when the used IP is registered. Proceeding to the
next exposure process without registering the IP will cause it to be considered as a split
exposure, disabling then the correct exposure parameters to be displayed.
 To have a study be suspended, ensure that IP registration has been performed with
respect to all the exposure menus already subjected to exposure, otherwise information
on X-ray exposure parameters will be cancelled.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual IN-24
 IN-25
4.3 Checking Output for Media
4. Click .
➤ IMPORTANT
Be sure to remove the DVD/CD drive.
 The Log-in window opens.
If you connect the USB flash drive, with DVD/CD drive still connected, USB flash drive is
recognized as other than “E:/”.

u NOTES u
Ÿ Here is describing about Swivel Flash Drive 2G (model number: UFDSWV2G). Read the
contents that match the USB flash drive being used as needed. Also, note that software
in the USB flash drive may differ even among Imation USB flash drive products.
Ÿ Depending on the model of the USB flash drive, the security region setting function may MBCL07040002.ai

not be available. Be sure to set a password at least.

For details of how to perform settings the USB flash drive, see “Appendix 17
Setting up the USB Flash Drive” under “Installation – Appendix (Appx IN)”. 5. Enter the password and click .

1. Connect a USB flash drive to USB port. ➥ REFERENCES

u NOTE u Ÿ The default password in service use is “**** ”.
Be sure to use a specified USB flash drive.
Ÿ To use software keyboard, click in the launcher to display it.

2. Click at the upper right corner of the window.  A message to indicate that you got able to access the flash drive is displayed.

 The luncher opens.

6. Click .

3. Click .  The CL-AP window opens.

 The window of the security software (Imation Lock) opens. 7. Click the “Media” tab.
 The media list is displayed.

MBCL07040001.ai

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual IN-25
 IN-26

8. Click , and click . 4.4 Checking the Connection between

the CL and Other Equipment
 The window opens for checking drive name and volume label.
Check the connection to the following equipment.

9. Click . m Synapse Server (DICOM Connection)

See “3. Connection Checkout”, under “Appendix 12 DICOM CR Storage” in
“Installation – Appendix (Appx IN)”.
10. Output the images that have been read by “4.1 Checking Connection
Between CL and RU” to the USB flash drive and then check that the study m Other maker’s equipment (DICOM CR Storage Connection)
saved in the media list is displayed.
See “3. Connection Checkout”, under “Appendix 13 DICOM CR Storage :
For details of output operation to media, see the CL Operation Manual. Transfer of Processed Images” in “Installation – Appendix (Appx IN)”.

m DRYPIX (DICOM Print)

See “3. Verifying the Connection”, under “Appendix 14 DICOM Print” in
“Installation – Appendix (Appx IN)”.

m RIS Server (DICOM MWM/PPS Connection)

See “3. Verifying the Connection”, under “Appendix 15 RIS : DICOM MWM /
DICOM PPS” in “Installation – Appendix (Appx IN)”.

m IDC4 (ID Online)

See “3. Verifying the Connection”, under “Appendix 18 IDC4 : ID Online” in
“Installation – Appendix (Appx IN)”.

m Synapse Server (Web Query)

See “3. Connection Checkout” under “Appendix 20 Synapse Server (Web
Query)” of “Appx IN”.

m Archiver
See “3. Verifying the Connection”, under “Appendix 18 Archiver: Storage
Commitment Push” in “Installation – Appendix (Appx IN)”.

m DAP (Dose-area Product Meter)

See “3. Verification” under “Appendix 22 DAP (Dose-area Product Meter)” in
“Installation – Appendix (Appx IN)”.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual IN-26
 IN-27
4.5 Checking the Output Image n Checking the format

Run the following checks on the output image. 1. Check that the white clear portion of the resulting output film does not
 Format check
exceed 2 mm in width (when an 100% image output is generated).
 Irregularity, sensitivity and density checks
Measure
 Film annotation character format Image frame
n Preparations

1. Have on the hand the IP to be used. Subject this IP to primary erasure.

For details on the primary erasure procedure, see “2.4 Performing the Image
Erasure Process Only (Primary Erasure)”, in the RU Operation Manual.

u NOTES u
White clear portion
 Check the output image with all IP sizes that are used in the hospital.
 Use the Type VI IPs.
 Make sure that no important image data (e.g., patient images) is exposed on the
IPs to be checked. 00000212.EPS

u NOTE u
2. Expose the IP to 1 mR of radiation. If the image is not generated at a magnification setting of 100%, calculate as follows
➥ REFERENCE to check the white clear portion.

If the IPs cannot exactly be exposed to 1 mR of radiation, use the following IP reduction ratio*
2× mm
exposure conditions as a guide. Note, however, that the following conditions are 100
used as a guide for standard IP setup. * The reduction ratio is printed at the bottom of a film output image.
Distance : 1.8 m
Voltage : 80 kV If any abnormality is encountered, see “Troubleshooting” of the RU Service
Manual.
Current : 50 mA
Time : 0.013 sec

3. Select “IMAGE Format” from “Test” as the exposure menu.

4. Set a cassette in the cassette setting unit.

 The image is read and transferred to the CL.

5. Click at the upper right corner of the CL window.

 The image printout process starts.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual IN-27
 IN-28
n Checking irregularities n Checking the film annotation character format

1. Check that the output film and the image displayed on the CL monitor are 1. Check to see that the film annotation character format information entered
both free from peculiar irregularities. from the CL is properly printed out onto the film.
If any abnormality is found, see “Troubleshooting” of the RU Service Manual. Also, check for blurred, chipped, or otherwise abnormal character printings.

2. Check that the system sensitivity value and film density value displayed on ➥ REFERENCE
the output film are approximately 200 and 1.2, respectively. The example in the figure below represents a printout that would be generated when the
If any abnormality is found, see “Troubleshooting” of the RU Service Manual. default film annotation character format is used (image size: 35 × 35cm (14" × 14"); print
format: TWIN).
When the default settings are used, character strings (1) through (19) are printed out.
(1) Hospital name (institution name)

FUJIF LM HOSPITAL 04001676 A0000 A020

(12) IP number
(2) EDR mode + menu code
(3) System ID + image number

(4) Patient ID
(13) Image processing conditions (5) Patient name (10) Film mark
(7) Gender
(8) Age or birth date
G 1.0G#0.7+0.50R5Q0.5 R->L G1.0G#0.7+0.50R5Q1.0
SKULL, GENERAL Surgi
L 4.0S200C 1.2 1.0AP 0000000001 MARY ADAMS [F] 23
1992. 11. 27 [17:43] SCALE:50% RT-04
01

(8) Requesting department (9) Group process information

(19)�
Technologist's (14) Exposure menu name (11) Reduction ratio
� code (17) Exposure time
(16) Image reversal mark (6) Exposure date
(15) Normalization conditions + corrections 00000034.EPS

If any abnormality is found, see “8. Print Output Function” in “Maintenance

Utility (MU)”.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual IN-28
 IN-29
n Exiting the CL-AP

1. Click .

2. Click , and then the shut down window opens.

Click while holding down the <Shift> key.

 The CL-AP exits, the system returns to the desktop window.

➥ REFERENCE
If you click [Shut Down] without holding down the <Shift> key, both the CL-AP and
Windows shut down.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual IN-29
 IN-30

5. Setup File Backup,

Image Database Initialization and
Error Log Verification/Deletion
This section explains about the procedures for backing up the CL and RU setup files,
initializing various image databases and verifying/deleting the error log.

When making backups, have the following item on hand.

 Storage media (ex. USB flash drive)

u NOTE u
Never turn OFF the CL or RU power during a backup process.
If the power turns OFF, the machine may fail to start up.

5.1 Backing Up the CL Setup Files

5.2 Initializing Various Image Databases

5.3 Backing Up the RU Setup Files

5.4 Verifying and Deleting the RU Error Log

5.5 Turning OFF the Mobile X-ray Unit power

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual IN-30
 IN-31
5.1 Backing Up the CL Setup Files 6. Click .

1. Connect the storage media (such as a USB flash drive) to a USB port of  The setup file backup process begins.
the Mobile X-ray Unit. u NOTES u
 No message appears to indicate the end of the backup process.
2. Start up the CL Service Utility and then click [Configuration Restore/Backup]. During the backup process, the mouse cursor changes to the mark. You may
 The “Configuration Restore/Backup” window opens.
understand that the backup process is completed when the mark changes back
to the mouse cursor.
3. Click [.....] in the [Configuration Backup] area.
The mark does not appear unless the mouse cursor is positioned in the
Configuration Restore/Backup window.
 Before removing the media, verify that the media access lamp is extinguished.

7. Remove the media from the USB port.

8. Click .

 The system returns to the “IIP Service Utility” window.

00000417.EPS

 A window opens, prompting you to select a storage directory.

4. Click the downward arrow mark for

, and then choose the drive for the media.

5. Click .

 The system returned to the “Configuration Restore/Backup” window.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual IN-31
 IN-32
5.2 Initializing Various Image Databases 4. Press the <Enter> key.
 The system returns to the “DataBase Utility” window.
Initialize the image database, output queue and patient database as follows.
u NOTE u
When the following message appears, the image database is not initialized.
5.2.1 Initializing Image Databases
It failed in initialized DB.
1. Click [Database Utility].
 The “DataBase Utility” window opens. Check that the SQL Server is running and that no image is placed on the image
output queue.
 To start the SQL Server
I. Restart the PC.
II. Select “Control Panel” from the menu and double-click “Administrative
Tool”.
III. Double-click “Computer Management”.
00000130.EPS IV. Select “Computer Management” – “Services and Applications” – “SQL Server
Configuration Manager” – “SQL Server 2005 Services”.

2. Click
V. Confirm that SQL Server (MSSQLSERVER) is “running”.

 A confirmation window opens.  If the image output queue is not empty

 Delete the images from the image output queue.
For the procedure for deleting the images from the image output queue, see
“5.2.2 Clearing the Image Output Queue”.

DCL44011.ai

3. Click .

 The image database initialization process ends in about 20 seconds, and the
following message is displayed.

00000184.EPS

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual IN-32
 IN-33
5.2.2 Clearing the Image Output Queue 5.2.3 Initializing the Patient Database

1. Click 1. Click

 A confirmation window opens.  A confirmation window opens.

MBCL07050001.ai MBCL07050002.ai

2. Click . 2. Click .

 The command prompt window opens to display the following message:  The command prompt window opens to display the following message:

00000347.EPS

3. Press the <Enter> key.

 The images are then deleted from the output queue and you are returned to the
“DataBase Utility” window.
00000557.EPS

4. Click . 3. Press the <Enter> key.

 The patient database is then initialized and you are returned to the “DataBase Utility”
 The system returns to the main menu. window.

4. Click .

 The system returns to the main menu.

5. Close the “Service Utility” window.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual IN-33
 IN-34
5.3 Backing Up the RU Setup File 3. From [LIST OF EXISTING RU], select a target RU for backup.
Con igu at on( )

This section explains about the procedure for making a backup by saving the RU [Select]
EACH RU SETTING
CONNECTION TEST
RU NAME L EXISTING RU

RU IP ADDR

machine-specific data onto a storage media (such as a USB flash drive) after the RU NAME IP ADDRESS RU TYPE VERSION
completion of setup. BACKUP RESTORE
ru7 172.16.1.110 FCR-MB201 V1.0

1.
ALL RUs SETTING

Connect the removable media (USB flash drive) to the USB port of the MBRU3160001.ai

Mobile X-ray Unit.

4. Click [FTP].
2. Open the Windows start menu window, designate “C:\Program Files\ Con iguration(C)

[Click]
FujiFilm\FCR\TOOL\RuPcTool\RuPCTool.exe” in the “Start Search” column,
EACH RU SETTING
CONNECTION TEST
RU NAME L ST OF EXISTING RU

R DR

and press the [Enter] key.

BACKUP RESTORE

ALL RUs SETTING

FRCH316A02.EPS

For details about FTP, see the RU Service Manual.

See the RU Service Manual.
#1
[Designate]
5. From the “BACKUP” pull-down menu, select the items you want to back up.
 CONFIGURATION
 LOG ALL
#2
[Press]  SCN ALL DATA
Enter Key

ERROR LOG
CONFIGURATION
RU PC-TOOL Ver.4.0.1 Con iguration(C)

TRACE LOG
EACH RU SETTING

Configuration(C) CONNECTION TEST

RU NAME L ST OF EXISTING RU

EACH RU SETTING
RU IP ADDR
[Select]
CONNECTION TEST HISTORY LOG
LIST OF EXISTING RU
RU NAME ru0
RU NAME IP ADDRESS RU TYPE VERSION NEW
BA RESTORE
LOG ALL
RU IP ADDR 172 16 1 11 ru0 172.16.1.11 FCR-MB201 V1.0
ALL RUs SETTING
SCN ALL DATA
MUTL PING MON FTP DELETE
SCN LIGHT COLLECTING DATA
INSTALL VERSION UP EDIT HISTORY EDIT CONFIGURATION SCN OPTICAL DATA
EDIT CL NAME FRCH316A04.EPS
BACKUP RESTORE
ERROR LOG

EXECUTE EXECUTE

I/O TRACE EXPERT ERROR DB

ALL RUs SETTING

UNINSTALL VERSION UP

MBRU7080004.ai

 The RU PC-TOOL starts.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual IN-34
 IN-35
6. Click [EXECUTE]. 8. Verify that the selected location is displayed, and then click [OK].

#1
Con iguration(C)

EACH RU SETTING
CONNECTION TEST
RU NAME LIST OF EXIST NG RU

RU IP ADDR
[Click] [Verify]
The selected location
BACKUP REST

is displayed.
ALL RUs SETTING

FRCH316A03.EPS

#2
7. Select a backup destination folder. [Click]

#1
[Click] FRCH316A10.EPS

9. Reconfirm the location for data backup, and then click [OK].

#2
[Click]
#1
[Confirm]
#2 FRCH316A06.EPS

[Select]
10. When a message appears to indicate the completion of backup, click [OK].
[Click]

FRCH316A09.EPS

FRCH316A05.EPS
11. Click the mark at the upper right corner of the window.
 The system returns to the desktop window.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual IN-35
 IN-36
5.4 Verifying and Deleting the RU Error Log 3. Click [UPDATE].

5.4.1 Verifying the RU Error Log

By illustrating a case of viewing the latest error log, the procedure is described below.

1. Select an RU under “LIST OF EXISTING RUs” in the main menu of the RU

PC-TOOL.
Con igu at on(C)

[Select]
EACH RU SETTING
CONNECTION TEST
RU NAME OF EXIST NG RU

RU IP ADDR

RU NAME IP ADDRESS RU TYPE VERSION

BACKUP RESTORE
ru7 172.16.1.110 FCR-MB201 V1.0 The latest error log is added to the end of the list.
ALL RUs SETTING

MBRU3160001.ai

2. Click [ERROR DB].

Con iguration(C)

EACH RU SETTING
CONNECTION TEST
RU NAME LIST OF EXIST NG RU

RU IP ADDR

BACKUP RESTORE

ALL RUs SETTING FRCH4434.EPS

FRCH4433.EPS

 The “ERROR DB” window opens.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual IN-36
 IN-37
5.4.2 Deleting the RU Error Log 5.5 Turning OFF the Mobile X-ray Unit

1. Start up the RU PC-TOOL, and in the “ERROR DB” window that opens, click
1. Shut down the CL system.
the [CLEAR] button.
2. Turn OFF the Mobile X-ray Unit power.
2. Exit the RU PC-TOOL.
u NOTE u
Continue to perform the procedures set forth in Chapter 5, Installing the RU software, in
“Installation” of the RU Service Manual.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual IN-37
 IN-38

6. Connecting with On-Site Network l Wireless LAN security settings

Make the following settings in order to prevent the study data and patient information
Use wireless LAN in case that you can not wire connection to transfer images from CL to from leaking.
on-site network. Use the USB-connected wireless LAN that is purchased by user. When
Ÿ Encrypting data
you set the wireless LAN adopter, see instructions of them.
Be sure to configure this setting in accordance with the functions of the wireless LAN
access point of the site. The encryption stronger than WPA is recommended (WEP is
6.1 Wireless LAN Settings not recommended due to its weakness).
Ÿ Enabling the MAC address filtering
l CL requirements
If possible, register the MAC address of the wireless LAN adopter that can be connected
CL main unit must have been set up accordingly. to and reject the unregistered wireless LAN adopter.

l Wireless LAN adopter to be connected Ÿ SSID

If possible, use the stealth mode to prevent careless access from the outside.
Use a USB wireless LAN adopter.
Recommended product : Buffalo Technology WLI-UC-AG300N You can set the security automatically by using AOSS between wireless LAN access point
u NOTE u and wireless LAN adopter manufactured by Buffalo Technology. However, AOSS may
It is not recommended to use wireless network and wired network at the same time to affect the existing connected devices; therefore, use AOSS after thoroughly examining
connect to the on-site network. the network environment.

l Setting up the network address uuCAUTIONuu

When using the wireless LAN, assign a network address (segment) that is different from Make sure to set the security when you set the wireless LAN. There is a risk
the one for wired LAN. Also, set a large value for the Interface metric on the wired LAN. that patient information may be leaked from communicating study data if it is
This setting make the connection to the wireless LAN prioritized when connecting the on- intercepted.
site network.

➥ REFERENCE ➤ IMPORTANT
The example of settings when the network address of the CL is 172.16.xxx.yyy and one Ÿ When setting wireless LAN, avoid interference with other wireless LAN and select
for on-site network is 192.168.xxx.yyy is shown below. appropriate channels. If interference occurs, the communication quality will be low and
bad communication may happen.
<Wired LAN> Ÿ Exterior use of communication method 802.11a is prohibited by the Radio Law. It should
IP address : 172.16.1.20 be interior-use only.
Subnet mask : 255.255.0.0
Interface metric : 50
u NOTE u
<Wireless LAN> When you distribute images through wireless LAN, perform settings to make images
IP address : 192.168.1.20 compressed for their output on Service Utility. This is to reduce communication load even
Subnet mask : 255.255.0.0 if the wireless LAN connection is unstable.
Interface metric : (auto)

For the IP address setup procedure, see “Appendix 7 Changing the CL IP Address ”
under “Installation – Appendix (Appx IN)”.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual IN-38
 Appx IN-I

FCR-MB 201 Console

Service Manual

Installation – Appendix (Appx IN)

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx IN-I
 Appx IN-II
Control Sheet
Issue date Revision number Reason Pages affected
10/29/2010 01 New release (FM5797) All pages

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx IN-II
 Appx IN-III
BLANK PAGE

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx IN-III
 Appx IN-IV
BLANK PAGE

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx IN-IV
 Appx IN1-1

Appendix 1 Setting the Touch Panel 5. Touch all the displayed on the panel.

Adjust the touch panel using the software installed on the PC.  A confirmation window opens.

1. Select “Control Panel” from the menu.

 The “Control Panel” window opens.

2. Double-click .

MBCL03040005.ai

 The “UPDD Console” window opens.

6. Touch within a period of 15 seconds.

3. Click at the left-hand side of the window,  The system returns to the “UPDD Console” window.
and place a checkmark to “Silent touch”.
7. Close the “UPDD Console” window.
 The system returns to the “Control Panel” window.
4. Click at the lower left corner of the window.

8. Close the “Control Panel” window.

 The system returns to the desktop screen.

MBCL03040004.ai

 A window for calibration opens.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx IN1-1
 Appx IN1-2
BLANK PAGE

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx IN1-2
 Appx IN1-3
BLANK PAGE

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx IN1-3
 Appx IN1-4
BLANK PAGE

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx IN1-4
 Appx IN2-1

Appendix 2 Setting the RU-Config

Used to edit the configuration information for the RU.
However, the configuration information (such as IP address of the RU) that is set in
Machine Maintenance Utility cannot be set with EDIT CONFIGURATION.
The set information is written into the flash ROM of the RU.

uuCAUTIONuu
The LED panel on the RU lights up while updating the FLASH ROM in the RU.
During that time, never turn OFF the power.
Otherwise, the contents of the FLASH ROM in the RU would be collapsed and RU
would not start up.

u NOTES u
Ÿ Verify that Explorer or other application is not running. If any applications are running,
exit them.
Ÿ Start the setting work with the CL-AP shut down accordingly.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx IN2-1
 Appx IN2-2
1. Turn ON the Mobile X-ray Unit power. 3. Select an RU from “LIST OF EXISTING RU”.
Con igu at on( )

[Select]
EACH RU SETTING

2.
CONNECTION TEST
L EXISTING RU

Open the Windows start menu window, designate

RU NAME
RU IP ADDR

“C:\Program Files\FujiFilm\FCR\TOOL\RuPcTool\RuPCTool.exe” in RU NAME IP ADDRESS RU TYPE VERSION

BACKUP RESTORE
ru7 172.16.1.110 FCR-MB201 V1.0
the “Start Search” column, and press the <Enter> key.
ALL RUs SETTING

MBRU3160001.ai

4. Click [EDIT CONFIGURATION].

#1 Con igu at on( )

EACH RU SETTING
CONNECTION TEST

[Designate]
RU NAME L ST OF EXISTING RU

RU IP ADDR

BACKUP RESTORE

#2 ALL RUs SETTING

[Press]
Enter Key

The "EDIT CONFIGURATION" window appears.

RU PC-TOOL Ver.4.0.1
Configuration(C)

EACH RU SETTING
CONNECTION TEST
RU NAME ru0 LIST OF EXISTING RU
RU NAME IP ADDRESS RU TYPE VERSION NEW
RU IP ADDR 172 16 1 11 ru0 172.16.1.11 FCR-MB201 V1.0
MUTL PING MON FTP DELETE

INSTALL VERSION UP EDIT HISTORY EDIT CONFIGURATION

EDIT CL NAME
BACKUP RESTORE
ERROR LOG FRCH4492.EPS

EXECUTE EXECUTE

I/O TRACE EXPERT

➥ REFERENCE
ERROR DB

Clicking on [EDIT CONFIGURATION], “Under Maintenance” appears on the

ALL RUs SETTING
UNINSTALL VERSION UP operation panel of the RU.
MBRU7080004.ai

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx IN2-2
 Appx IN2-3
5. Set the respective CONFIGURATION items. Item name Function
Sets the identification code (1-digit alphanumeric character) with
u NOTE u EQUIPMENT CODE which the user identifies the RU which has read the image when
I
Check to make sure that the setting of the IP type (GENERATION SETTING) (A-Z) a plurality of RU's are used. The identification code is printed on
coincides with the IP type to be used at the user’s site. If the IP type set in the the output film.
configuration information differs from the IP to be used at the user's site, such Sets the erasure mode which can be selected by the “Mode
problems may occur that sufficient IP image erasure cannot be done or it takes long change” button of the RU.
The setting is effective only when “HOSPITAL” was selected in
to process.
RANGE OF ERASE setting “SCREEN TYPE” at the time of installation.
II
MODE - ERASE 1, ERASE 2 (default):
I Can select secondary erasure or primary erasure.
- ERASE 1:
II
Can select only primary erasure.
Sets the period of time since “primary erasure” or “secondary
erasure” is selected by the “Mode change” button of the RU until
III III
ERASE MODE TIME
“Image reading” is automatically restored in the unit of second.
OUT (0-999[s])
IV When “0” is set, the mode is kept changed to “primary erasure”
or “secondary erasure”.
Determines whether the alarm sounds when a cassette is set.
ALARM
IV - ON (default): Alarm sounds.
V (CASSETTE SET)
- OFF: Alarm does not sound.
Selects the kind of IP (inch or metric) to be used in the machine.
INCH OR METRIC
V - INCH (default): Select when inch IP's are to be used.
VI SETTING
- METRIC: Select when metric IP’s are to be used.
Selects the IP type to be used in the machine.
GENERATION - VI (default): VI-type IP is to be used.
VII VI - VN: VN-type IP is to be used.
SETTING
*No setting required on this device.
FRCH4495.EPS
Determines whether or not the patient’s name registered in the
➥ REFERENCE CR Console is to be displayed on the operation panel.
This is effective only when “CLINIC” is selected in “SCREEN
When an overexposed IP is detected, it is written into the error log and an error DISPLAY
TYPE” setting for installation.
message appears. The set item is displayed only when “USE” is selected in “selection VII PATIENT&MENU
- ON (default): The patient’s name is displayed.
NAME
as to whether or not the LINAC CASSETTE is to be used” when the software is - OFF: The patient's name is not displayed.
installed or updated in version.
*Always set to “OFF” in the machine.

- LOG&MESSAGE (default):
Write into the log file and display of an error message
WARNING OF - LOG ONLY:
VIII
VIII OVERXRAY Write of an error log
- NONE:
Nothing is done.
FRCH44A1.EPS

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx IN2-3
 Appx IN2-4
6. Move down the slide bar. Item name Function

Determines the menu (user utility) items to be displayed when

the "Utility" button on the operation panel is pressed.
[Move] - FULL:
Set this when the “SCREEN TYPE” setting is “HOSPITAL”.
Displays the entire menu of the user utility.
- SCANNER CLEANING:
Set this when the “SCREEN TYPE” setting is “CLINIC”.
II UTILITY MENU
Displays scanner cleaning only.
- :
Set this when the “SCREEN TYPE” setting is “CLINIC” at the
FRCH44A0.EPS
time of installation.
Displays scanner cleaning only.
7. Set each item of CONFIGURATION. Do not set this when only the configuration setting is to be
changed.
I
Determines whether the warning on the laser life is to be only
written into the error log or written into the error log and displayed
in the error message.
II III WARNING OF LD LIFE - LOG ONLY (default):
Only write into the error log
- LOG & MESSAGE:
III Write into the error log and display of the error message.
Determines whether the warning on the erasure lamp life is to
be only written into the error log or written into the error log and
IV displayed in the error message.
WARNING OF LAMP
IV - LOG ONLY (default):
LIFE
Only write into the error log
V - LOG & MESSAGE:
Write into the error log and display of the error message.
Determines whether the warning on the part life is to be only
VI
written into the error log or written into the error log and displayed
in the error message.
WARNING OF PARTS
V - LOG ONLY (default):
FRCH4496.EPS
LIFE
Only write into the error log
Item name Function - LOG & MESSAGE:
Write into the error log and display of the error message.
Determines whether or not the name of the CL name is
displayed, which is the destination of transfer of the read image Determines whether the warning on the S value is to be only
during image reading. written into the error log or written into the error log and displayed
This is effective only when “HOSPITAL” is selected in “SCREEN in the error message.
WARNING OF S
I DISPLAY CL NAME TYPE” setting for installation. VI - LOG ONLY (default):
VALUE
- OFF (default): Only write into the error log
The CL name of the image destination is not displayed. - LOG & MESSAGE:
- ON: Write into the error log and display of the error message.
The CL name of the image destination is displayed.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx IN2-4
 Appx IN2-5
8. Set each item of CONFIGURATION. (continuation of step 7) 9. Click [SET].
I

II

III
MBRU4040003.ai

[Click]
Item name Function
Set the timing when you can press the QUIT STUDY button on FRCH4494.EPS

the console after reading the image.

- IMAGE TRANSFER END: uuCAUTIONuu
THE TIMING FOR You can press the QUIT STUDY button when the read image
I ACTIVATING “QUIT data is transferred to the console. Do not take the procedures 7 and 8 during the installation of the RU software. If the
STUDY” BUTTON (1:1) - UNLOCK CASSETTE: RU power is turned OFF and then ON before the installation of the RU software is
You can press the QUIT STUDY button when the cassette hold completed, the software cannot be installed normally.
is released.
* Always select “IMAGE TRANSFER END”.
Set the timing to display the alarm for cleaning the erase lamp. 10. Click in the upper right corner of the main window of RU PC-TOOL.
- NO DISP (default): Con iguration(C)

EACH RU SETTING

The error message will not be displayed.

CONNECTION TEST
RU NAME L ST OF EXISTING RU

RU IP ADDR

- 45,000:
The alarm is displayed after the erase lamp is lighted up BACKUP RESTORE

45,000 times.
- 22,500:
ALL RUs SETTING

WARNING OF LAMP
II The alarm is displayed after the erase lamp is lighted up
FRCH4408.EPS

CLEANING
22,500 times.
- 90,000: 11. Shut down the PC, and turn OFF the Mobile X-ray Unit power.
The alarm is displayed after the erase lamp is lighted up
90,000 times.
- FREE INPUT: 12. Turn ON the Mobile X-ray Unit power.
Enter a value for
“WARNING OF LAMP CLEANING (FREE INTPUT)”
Enter a value for the timing to clean the erasure lamp (only
WARNING OF LAMP when “FREE INTPUT” is selected at “WARNING OF LAMP
III CLEANING CLEANING”).
(FREE INPUT)
* Enter the value within the range from “xxxx” to “yyyyyy”.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx IN2-5
 Appx IN2-6
BLANK PAGE

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx IN2-6
 Appx IN2-7
BLANK PAGE

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx IN2-7
 Appx IN2-8
BLANK PAGE

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx IN2-8
 Appx IN3-1

Appendix 3 Connecting the Barcode Reader n Installing the driver software

[Available Item] 1. Open the Windows desktop screen.

This appendix explains about the procedures for connecting and setting up the barcode 2. Select “Control Panel” from the menu.
reader.
 The “Control Panel” window opens.
1. Connecting the Barcode Reader to the CL
n Connecting the Barcode Reader
3. Double-click .

1. Connect a barcode reader to the USB port.

Cable  The “Device Manager” window opens.

USB port 4. In the “Device Manager” window, right-click “Human Interface Devices” and
then “USB Human Interface Device” to select “Update Drivers...”.
Barcode reader
CL
00000037.EPS

u NOTES u
Ÿ After the barcode reader has been connected to the USB port, be sure to restart
the OS. Although a window opens immediately after reader connection to indicate
that driver software installation has been completed, you cannot immediately use
the reader because it is not recognized by the CL-AP yet.
Ÿ Because the CL system barcode reader sound needs to be produced only when a
barcode is read successfully, it has been designed so that the PC itself produces a
sound. For this reason, the sound produced by the barcode reader, not only when
a barcode is read successfully but also when it is read unsuccessfully, is disabled
for machines when they are shipped from factory.

MBCL08030001.ai

 The “Update Driver Software - USB Human Interface Device” window opens.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx IN3-1
 Appx IN3-2
5. Select “Browse my computer for driver software”. 7. Select a driver you wish to install and click .

MT0000055.ai

MT000057.ai
 “Windows Security” window opens.
 The “Browse for driver software on your computer” window opens.

8. Select “Install this driver software anyway”.

6. Select “Let me pick from a list of device drivers on my computer”.

MT000059.ai

 A window opens to indicate that installation processing has ended.

9. Click [Close].
 You are then returned to the “Device Manager” window.
MT000058.ai

 The “Select the device driver you want to install for this hardware.” window opens.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx IN3-2
 Appx IN3-3
10. Verify that the proper USB drivers are installed.

Normal installation of drivers

MBCL08030002.ai

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx IN3-3
 Appx IN3-4

2. Settings Required When Using the IP Barcode

In service setup set whether the IP barcode sequential reading is enabled or not.

1. Start the Service Utility mode.

For details on the startup procedure, see “1. Starting/Exiting the Service Utility”
under “MU: Maintenance Utility”.

2. Click in the “Service Utility” window.

 The “Setup Configuration Item” window opens.

3. Click the sign within .

4. Click .
 The IDT functionality and magnetic card setup items appear in the right-hand area of
the window.

5. Follow the item no. “81. Enable Continuous Barcode Read” to set up the
sequential reading of IP barcode.
No. Name Meaning
Enable Continuous Specify whether or not that same barcodes sequentially
Barcode Read registered.
❍ Yes
81
Enable
¤ No
Disable

¤ : Default setting

6. From the “Config (F)” menu, choose “Save”.

 A window opens, prompting you to confirm the setup data to be saved.

7. Click .

 The system saves the setup data.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx IN3-4
 Appx IN3-5

3. Settings Required When 6. From the “Config (F)” menu, choose “Save”.
 A window opens, prompting you to confirm the setup data to be saved.
Using the Study List Search Function
Based on the Hospital Barcode 7. Click .

 The system saves the setup data.

3.1 Setting the Search Key
Select whether to use Accession Number or Patient ID Number as the key used to search
for a study.

1. Start the Service Utility mode.

For details on the startup procedure, see “1. Starting/Exiting the Service Utility”
under “Maintenance Utility (MU)”.

2. Click in the “Service Utility” window.

 The “Setup Configuration Item” window opens.

3. Click the sign within .

4. Click .
 The IDT functionality and magnetic card setup items appear in the right-hand area of
the window.

5. Use the CSL/IDT FUNCTION setup item no. “84 Barcode Type for Search on
List” to set up the search key.
No. Name Meaning
Barcode Type for Search key used for barcode-based searches.
Search on List ¤ 0:Accession Number
84 Accession Number
❍ 1:Patient ID
Patient ID

¤ : Default setting

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx IN3-5
 Appx IN3-6
3.2 Setting the Barcode Type
Barcode types that can be read on the CL are CodeBar (NW-7) and Code39.
When using a barcode type other than these, register such barcode type using the
Service Utility mode.

For details on how to set up the necessary procedure, see “11. Setting the Barcode
— Barcode Setting” under “Maintenance Utility (MU)”.

u NOTE u
Depending on the barcode type, settings must be performed for the barcode reader to be
employed.
See the barcode reader Operation Manual to set up a barcode type good for code
reading.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx IN3-6
 Appx IN3-7
BLANK PAGE

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx IN3-7
 Appx IN3-8
BLANK PAGE

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx IN3-8
 Appx IN4-1

Appendix 4 Setting Up the Magnetic Card 1. Connecting the CL to the Reader

[Available Item]
n Connecting the Barcode Reader
u NOTE u Connect the reader to the USB port.
When using a JIS type reader, use a JIS type magnetic card.
When using an ISO type reader, use an ISO type magnetic card. 1. Connect the reader to the USB port.

Dedicated cable
The magnetic card reader (hereinafter abbreviated as the reader) connection and setup supplied with the
procedures are described herein.
reader
Two types of readers can be connected to the USB port: JIS type and ISO type. The
USB port
choice between these two types depends on the user's operating environment.

JIS type ISO type CL

Direction Reader
of magnetic
card insertion
00000030.EPS

u NOTE u
Lamp Lamp
(left-hand side) After the reader has been connected to the USB port, be sure to restart the OS. Although
(right-hand side)
Reading surface a window opens immediately after reader connection to indicate that driver software
Reading surface installation has been completed, you cannot immediately use the reader because it is not
recognized by the CL-AP yet.
00000029.EPS

n Installing the driver software

1. Open the Windows desktop screen.

2. Select “Control Panel” from the menu.

 The “Control Panel” window opens.

3. Double-click .

 The “Device Manager” window opens.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx IN4-1
 Appx IN4-2
4. In the “Device Manager” window, right-click “Human Interface Devices” and 6. Select “Let me pick from a list of device drivers on my computer”.
then “USB Human Interface Device” to select “Update Drivers...”.

MT000058.ai

 The “Select the device driver you want to install for this hardware.” window opens.
MBCL08030001.ai

 The “Update Driver Software - USB Human Interface Device” window opens. 7. Select a driver you wish to install and click .

5. Select “Browse my computer for driver software”.

MT0000054.ai

 “Windows Security” window opens.

MT000057.ai

 The “Browse for driver software on your computer” window opens.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx IN4-2
 Appx IN4-3
8. Select “Install this driver software anyway”.

MT000059.ai

 A window opens to indicate that installation processing has ended.

9. Click [Close].
 You are then returned to the “Device Manager” window.

10. Verify that the proper USB drivers are installed.

Normal installation of drivers

MBCL08040001.ai

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx IN4-3
 Appx IN4-4

2. Setting the Reader and Magnetic Card n Setting the magnetic card type

l When using a magnetic card reader in Fuji format

Perform the following procedures to set the reader type and magnetic card type.

1. From , select a magnetic card type.

n Setting the reader type
ISO magnetic card JIS magnetic card
1. Start the Service Utility mode of the CL. - 0: FUJI [default] - 0: FUJI [default]
For details on the startup procedure, see “1. Starting/Exiting the Service Utility” - 6: FJ51 - 1: FJ01
under “Maintenance Utility (MU)”. - 2: FJ02
- 3: FJ03
- 4: FJ04
2. Click in the “Service Utility” window. - 5: FJ05

For detailed format descriptions, see “4. ID Card Data Format [Reference]”.
 The “Setup Configuration Item” window opens.
➥ REFERENCE
3. Click the sign within . Even if “Yes” is set for , a magnetic card in Fuji format can be
used (recognized by the system code).
4. Click .
 The IDT functionality and magnetic card setup items appear in the right-hand area of
the window. 2. From the “Config (F)” menu, choose “Save”.
 A window opens, prompting you to confirm the setup data to be saved.

5. With , set the reader type.

3. Click .

 The system saves the setup data.

4. From the “Config (F)” menu, choose “Close”.

 The system returns to the "IIP Service Utility" window.

5. Click .

 The system returns to the desktop screen.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx IN4-4
 Appx IN4-5
 When using a hospital card (in a hospital’s unique format) 6. Click “Card Format”.

1. From the “Setup Configuration Item” window, change the

setting to "Yes”.

2. From the “Config (F)” menu, choose “Save”.

 A window opens, prompting you to confirm the setup data to be saved.

3. Click .
MT000060.ai
 The system saves the setup data.
 The “Magnetic Card Format” window opens.

4. From the “Config (F)” menu, choose “Close”.

 The system returns to the “IIP Service Utility” window.

5. Click .

 The “Magnetic Card Format” window opens.

00000431.ai

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx IN4-5
 Appx IN4-6
7. Determine “Data Length”, “Header String” and “Header Offset” values in 9. In accordance with the magnetic card data format used in the hospital, set
accordance with the magnetic card data format adopted at the hospital. “Data Type”, “Format”, “Card Offset”, “Data Length”, and “Destination”.

For data format details, see “4. ID Card Data Format [Reference]”.

Ÿ Data Length : The length of the overall data registered on the magnetic card.
Ÿ Header String : The header character string of the data. I
Ÿ Header Offset : The header character string start position.
➥ REFERENCE
II
This setting is to cope with the problem of cancellation of significant digits occurring
when reading a hospital card, which causes the relevant patient information to be
different from the original.
This setting checks the Data Length and Header String of a hospital card, causing
thus an error to be indicated in the event of a problem of cancellation of signification
digits, which consequently prevents a data mis-reading error to occur. Note that III
when both the Data Length and Header String boxes are blank, this setting will not
be performed.

8. To add a new item, click .

00000432.eps

➥ REFERENCES For detailed data format descriptions, see “4. ID Card Data Format [Reference].”

I. Click the downward arrow mark to select a Data Type setting.

Ÿ When changing an item setting, select an item and then click .
II. Click the downward arrow mark to select a Format setting.
Ÿ To delete an existing setup item, select it and then click .

 The “Data Type” window opens. u NOTE u

Selectable only when “Patient Sex”, “Patient Birth Date”, or “Year or Month of Patient
Birth Date” is selected as a Data Type setting.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx IN4-6
 Appx IN4-7
III.Enter the Card Offset, Data Length , and Destination (storage offset)
settings.
10. Click .

 The system returns to the “Magnetic Card Format” window.If the entered settings
Ÿ Card Offset
are incorrect, an error message appears.If an error message appears, repeat steps
Specify the data start position on the card.
7-I and beyond.
Setup must be performed with the position next to “STX” (the character “F” when
the FUJI card is used) regarded as “0”.
Do not select the “SI/SO” or “Kanji IN/OUT” code portion as the start position.
11. To add any other item, repeat steps 6. through 8.
Ÿ Data Length
Enter the number of characters existing before the card offset position to specify
12. Click .

the length of the data to be read.  The system returns to the “IIP Service Utility” window.
Ensure that the data length does not include the “SI/SO" or “Kanji IN/OUT” code
portion.
For kanji data, use an even number to specify the data length.
13. Click .

u NOTE u  The system returns to the desktop screen.

Be sure that the patient ID number, examination number, and accession number
data lengths do not exceed the effective number of digits specified for the “SYSTEM
CONFIG” –“CSL/IDT FUNCTION” examination number character string length,
patient ID character string length, and accession number character string
length. If such a limit is exceeded, an error occurs.
Also, note that the padding process is performed as defined by “CSL/IDT
FUNCTION” of “SYSTEM CONFIG” when the effective number of digits is not
reached.

➥ REFERENCES
The data length cannot be specified for the following data types.
Ÿ Patient Birthday Date (Day)
Ÿ Patient Birthday Date (Month)
Ÿ Patient Birthday Date (Year)
Ÿ Patient Birthday Date
Ÿ Patient Sex

Ÿ Destination (storage offset)

Specify the location at which the read data is to be stored.
If, for instance, a setting of 2 is entered, the third character and thereafter will be
stored.
A setting of 0 should normally be used.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx IN4-7
 Appx IN4-8

3. Hospital Card Data Format Setup Example n Setup procedure

[Reference] 1. Start the CL service utility and then click [Magnetic Card Setting] – [Card
Format].”

This section explains about the setup procedure to be performed when using the  The “Magnetic Card Format” window opens.
magnetic card reader to load the following JIS-format-defined hospital card data into the
CL.
As a patient ID number (10-digit), a 5-digit number consisting of the third to seventh digits
is used.

n Hospital card information and detailed format descriptions

Patient name (16-digit 1-byte code katakana)

Sex (1-digit)
 The hospital card
Patient ID number (10-digit)
 records the items of
Birth date (4-digit year/2-digit month/2-digit
 information shown
day of the month) at left in descending
 Alphanumeric department name (10-digit) order. 00000467.eps

 Kanji name (7-digit 2-byte code kanji)

Detailed format description 2. Since the hospital card is JIS-formatted, verify that “0: JIS” is entered in the

Digit 1 2 3 4 5 6 — 15 16 17 18 19 20 21 22 — 29 30 field.
S S If the entry is not “0: JIS”, change it to the JIS format.
S O O
Content

Patient name Sex Patient ID number

T ⁄ ⁄ See “2. Setting the Reader and Magnetic Card”.
(1-byte code katakana, 16-digit) (1-digit) (10-digit)
X S S
I I

3. Make sure that the “Data Length” and “Header String” boxes are blank and
0 is set to the “Header Offset” box.
Digit 31 32 33 34 35 36 37 38 39 40 41 42 43 44 — 47 48 49 50
To check the card reading data, the “Data Length” is set to 70 in this example.
Birth date
Content

Alphanumeric
Day of department name (10-digit)
Month
Year (4-digit)   the month
(2-digit)
(2-digit)

(The symbol “” is a period.)

Digit 51 52 53 54 55 56 57 58 59 — 64 65 66 67 68 69 70 71 72

E E L
Content

S Undefined
S $ B Kanji name (14-digit) T R
I (2-digit)
C X C

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx IN4-8
 Appx IN4-9

4. With , clear all the current settings. 5. Click and perform “Patient Name” setup as indicated in the
window shown below:
Current settings

00000468.EPS

00000469.eps

u NOTES u
Ÿ When performing patient name setup for 1-byte code katakana (Japanese
language version), choose “Patient Name (SBCS)”.
Choosing “Patient Name (SBCS)” automatically adds the “SI/SO” code to both
ends of data.
Ÿ Since the code next to “STX” is regarded as “0” for counting purposes, enter “1” in
the “Card Offset” field.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx IN4-9
 Appx IN4-10

6. Click and perform “Sex” setup as indicated in the window 7. Click and perform “Patient ID” number setup as indicated in the
shown below: window shown below:

00000470.eps 00000271.eps

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx IN4-10
 Appx IN4-11
u NOTE u 8. Set the remaining items in accordance with the following table:
Since the third to seventh digits of a hospital card patient ID number are to be
Card Data
loaded, pay due attention to the “Card Offset”, “Data Length”, and “Destination” Date Type Format Destination
Offset Length
settings.
Birth date/ Patient Birthday
2000 29 4 0*
m Card Offset year (4) Date(Year)
Since the patient ID number data begins with the 21st digit and does not use the Birth date/ Patient Birthday
two highest digits, enter “21”. 10 34 2 5*
month (2) Date(Month)
m Data Length Birth date/
Patient Birthday
Since five digits are to be used, enter “5”. day of the - 37 2* 8*
Date(Date)
month (2)
m Destination Alphanumeric
Since data loading begins with the third digit of the patient ID area, enter “2”. Requesting
department - 39 10 0
Service(SBCS)
name (10)
Card Kanji name Patient Name
18 19 20 21 22 23 24 25 26 27 28 29 - 53 14 0
Offset (14) (SBCS)
Digit 20 21 22 23 24 25 26 27 28 29 30 31 Settings marked * cannot be changed.

Sex 1 1 5 2 4 4 9 3 5 1 Birthdate/  The resultant settings are shown below:

Content year
(1-digit) Patient ID number (10-digit) (4-digit)

Not used Data to be Not used

loaded into CL

00000607.ai

9. In the “Magnetic Card Format” window, click .

 The system returns to the “IIP Service Utility” window.

10. Click “Cancel”.

 The system then returns to the “IIP Service Utility” window.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx IN4-11
 Appx IN4-12

4. ID Card Data Format [Reference]  Extended Format (FJ01)

To use Kanji characters for the patient name, use the Extended Format.
Its system code is FJ01.
Two types of data formats are available for the ID card: JIS-II type and JIS-I type (ISO).
The system codes are defined as follows depending on how the area of Extended
Digit 1 2 3 4 5 6 7 8 9 — 24 25 26 27
Specification is used.
S S
Ÿ JIS-II type : FUJI, FJ01, FJ02, FJ03, FJ04, FJ05 S O O
System code Patient name
Ÿ JIS-I type (ISO) : FUJI, FJ51 Content T
(FJ01)
⁄
(20 digits)
⁄
X S S
I I
n JIS-II Type

 Fuji Standard Format (FUJI) Digit 28 29 — 36 37 38 39 40 41 42 43 44 45 46 47 48

It is FUJIFILM’s standard format, whose system code is FUJI. Since undefined regions Birth date
cannot be used, they must be filled with space (20H). Number
Sex
Content Male/Female
Note that kanji characters cannot be used for patient names. (10 digits)
Year  Month  Day (M) (F)

Digit 1 2 3 4 5 6 7 8 9 — 24 25 26 27
(The symbol “” is a period.)
S S
S O O Digit 49 50 51 52 53 54 55 56 57 58 — 69 70 71 72
System code Patient name
Content T ⁄ ⁄
(FUJI) (20 digits)
X S S
I I
E E L
Distribution code S Name in Kanji
Content S $ B T R
(4 lower digits) I (14 digits)
C X C

Digit 28 29 — 36 37 38 39 40 41 42 43 44 45 46 47 48

Birth date
Sex
Number
Content Male/Female
(10 digits)
Year  Month  Day (M) (F)

(The symbol “” is a period.)

Digit 49 50 51 52 53 54 55 56 57 58 — 69 70 71 72

E L
Undefined (22 digits)
Content T R
(space: 20H)
X C

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx IN4-12
 Appx IN4-13
 Extended Format (FJ02)  Extended Format (FJ03)
To use the department name in alphanumeric characters and distribution code, use the To use the test number and alphanumeric department name, use the Extended Format.
Extended Format. Its system code is FJ02. Its system code is FJ03.

Digit 1 2 3 4 5 6 7 8 9 — 24 25 26 27 Digit 1 2 3 4 5 6 7 8 9 — 24 25 26 27

S S S S
S O O S O O
System code Patient name System code Patient name
Content T ⁄ ⁄ Content T ⁄ ⁄
(FJ02) (20 digits) (FJ03) (20 digits)
X S S X S S
I I I I

Digit 28 29 — 36 37 38 39 40 41 42 43 44 45 46 47 48 Digit 28 29 — 36 37 38 39 40 41 42 43 44 45 46 47 48

Birth date Birth date

Sex Sex
Number Number
Content Male/Female Content Male/Female
(10 digits) (10 digits)
Year  Month  Day (M) (F) Year  Month  Day (M) (F)

(The symbol “” is a period.) (The symbol “” is a period.)

Digit 49 50 — 55 56 57 58 — 63 64 65 — 69 70 71 72 Digit 49 50 — 55 56 57 58 — 65 66 67 68 69 70 71 72

Alphanumeric L
E L E
department Distribution code Undefined Alphanumeric department Undefined R
Content T R Content Examination number (10 digits) T
name (8 digits) (6 digits) name (8 digits) (4 digits) C
X C X
(8 digits)

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx IN4-13
 Appx IN4-14
 Extended Format (FJ04)  Extended Format (FJ05)
To use the department name in alphanumeric characters and distribution code, use the To use the test number and alphanumeric department name, use the Extended Format.
Extended Format. Its system code is FJ04. Its system code is FJ05.

Digit 1 2 3 4 5 6 7 8 9 — 24 25 26 27 Digit 1 2 3 4 5 6 7 8 9 — 24 25 26 27

S S S S
S O O S O O
System code Patient name System code Patient name
Content T ⁄ ⁄ Content T ⁄ ⁄
(FJ04) (20 digits) (FJ05) (20 digits)
X S S X S S
I I I I

Digit 28 29 — 36 37 38 39 40 41 42 43 44 45 46 47 48 Digit 28 29 — 36 37 38 39 40 41 42 43 44 45 46 47 48

Birth date Birth date

Sex Sex
Number Number
Content Male/Female Content Male/Female
(10 digits) (10 digits)
Year  Month  Day (M) (F) Year  Month  Day (M) (F)

(The symbol “” is a period.) (The symbol “” is a period.)

Digit 49 50 — 55 56 57 58 — 65 66 67 68 69 70 71 72 Digit 50 51 — 56 57 58 59 60 61 62 63 64 — 69 70 71 72

S
E L O E E L
Distribution code Examination number Undefined Alphanumeric department Department name in Kanji
Content T R Content ⁄ S $ B B T R
(8 digits) (10 digits) (4 digits) name (8 digits) (8 digits)
X C S C X C
I

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx IN4-14
 Appx IN4-15
n JIS-I Type (ISO)  Extended Format (FJ51)
In the ISO specification format, to use the alphanumeric department name, distribution
 Fuji Standard (ISO) Format code, test number, use the Extended Format. Its system code is FJ51.
A standard-specification card that is not particularly specified should comply with this
format. This format is supported by all FCR systems. Digit 1 2 3 4 5 6 7 8 9 — 25 26 27 28

Digit 1 2 3 4 5 6 7 8 9 — 25 26 27 28 S

Space

Space
System code Patient name
Content T
(FJ51) (20 digits)
X
S

Space

Space
System code Patient name
Content T F
(FUJI) (20 digits)
X

Digit 29 30 — 37 38 39 40 41 42 43 44 45 46 47 48 49

Birth date
Digit 28 29 — 37 38 39 40 41 42 43 44 45 46 47 48 49 Sex
Number
Content Male/Female
(10 digits)
Birth date Year  Month  Day (M) (F)
Sex
Number
Content Male/Female
(10 digits)
Year  Month  Day (M) (F) (The symbol “” is a period.)

(The symbol “” is a period.) Digit 50 51 — 56 57 58 59 — 64 65 66 67 — 74 75 76 77 78 79

Digit 50 51 52 — 76 77 78 79 Alphanumeric department E L

Distribution code Examination number Space
Content name T R
(8 digits) (10 digits) (2 digits)
(8 digits) X C
E L
Undefined
Content T R
(28 digits)
X C

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx IN4-15
 Appx IN4-16
n Data Definition  Patient Name
Ÿ For JIS
u NOTES u This indicates a patient name by not greater than 20 Roman characters or Katakana
m Exercise care not to confuse the JIS and ISO cards, since they contain different graphic characters, excluding @ and *.
character codes. To switch between alphabet and Katakana modes, use SI/SO code.
m Undefined regions in the recorded information must be filled with space code (JIS: Any SI/SO code of not greater than 20 characters of the patient name is substituted by
20H/ISO: 00H) if: space code (20H) and handled as part of the 20-character patient name.
Ÿ Some of the information to be recorded into the ID card cannot be entered; and
Ÿ The number of characters actually entered is smaller than the number of characters Ÿ For ISO
specified in this specification. This indicates a patient name by not greater than 20 Roman characters or Roman
special characters, excluding @ and *.
 STX: Start Code For Roman special characters, set MAG CARD of the IDT management information to
1, and set Roman special character codes and characters used in “Setting Character
This code indicates the start of text that has been written.
Code for Reading ISO Card.”

 System Code: Identification Code

 Number: Patient Number
Four-character code that identifies whether the ID card is for FCR use or not.
This indicates a patient number for identifying the patient by graphic characters in
alphabetic mode, excluding @ and *.
Identification code Format type
If the patient number falls short of ten digits, enter characters from the right-most location,
FUJI Standard format and fill the rest with space code (JIS: 20H/ISO: 00H).
FU** (*: numeral) Extension format
28 29 30 31 32 33 34 35 36 37
Other Hospital individual format
1 2 3 4 5
 SI/SO: Extended Code
Space code (JIS: 20H/ISO: 00H)
u NOTE u
This code exists only in JIS.

SI and SO are used in pair as a special character to extend graphic characters.

Ÿ From SI to next SO: Graphic characters for alphabets
Ÿ From SO to next SI: Graphic characters for Katakana

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx IN4-16
 Appx IN4-17
 Birth Date: Patient Birth Date  Distribution Code (8 digits)
This indicates the patient’s birth date in the dominical year. The distribution code is used to set a destination of image data transfer.
If the distribution code falls short of eight digits, enter characters from the right-most
Ÿ Year : Four digits from 0 to 9.
location, and fill the rest with space code (JIS: 20H/ISO: 00H).
Ÿ Month : Two digits from 0 to 9.
Correspondence between the transfer destination and distribution code value may be set
Ÿ Day : Two digits from 0 to 9.
arbitrarily by the user.
If the number of digits for the birth date falls short of its effective number of digits, enter When this code is not used, fill it with space code (JIS: 20H/ISO: 00H).
numbers from the right-most location, and fill the rest with zero (JIS: 30H/ISO: 10H).
38 39 40 41 42 43 44 45 46 47 1 2 3 4 5

1 9 9 3 0 3 3 1 Space code (JIS: 20H/ISO: 00H)

Fill 0.  Examination Number (10 digits)

The examination number represents the data transferred mainly from the hospital
information system to identify the distinction between examinations conducted. If the
Year Month Day
examination number falls short of ten digits, enter characters from the right-most location,
and fill the rest with space code (JIS: 20H/ISO: 00H).
u NOTE u
“•” in the 42nd and 45th digits denotes a period (JIS:2EH/ISO:0EH). This code is not used for control purposes.
When this code is not used, fill it with space code (JIS: 20H/ISO: 00H).
 Sex: Patient Sex
The sex of a patient is denoted by one alphabetic character. 1 2 0 4 5

Ÿ Male : M Space code (JIS: 20H/ISO: 00H)

Ÿ Female : F
 ETX: End Code
This code indicates the end of text.

 LRC: LRC Code

LRC denotes a horizontal redundancy code for a horizontal parity check bit of information
characters recorded.
Horizontal parity check is performed from the start code to the end code.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx IN4-17
 Appx IN4-18
BLANK PAGE

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx IN4-18
 Appx IN4-19
BLANK PAGE

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx IN4-19
 Appx IN4-20
BLANK PAGE

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx IN4-20
 Appx IN5-1

Appendix 5 Procedures for Changing n Changing the CL-PC IP address

the CL and RU IP Addresses 1. Select “Control Panel” from the menu.

 The “Control Panel” window opens.

This appendix explains about the procedures for changing the CL and RU IP addresses.
The IP addresses need to be changed in the following cases:

When the CL and RU IP addresses need to be changed for

hospital network management purposes 2. Double-click .

1. Incorporating into the Network  The “Network and Sharing Center” window opens.

In compliance with the hospital network specifications, connect the CL and RU network
cables to the hospital’s network. 3. Click “View status”.

2. Changing the Software Settings

Change the IP addresses for the CL and RU as summarized herein:
RU IP address : 172.16.1.10  200.150.100.50
CL IP address : 172.16.1.20  200.150.100.10
To perform necessary procedures, observe the workflow below:

n Changing the CL-PC IP address

MBCL08050001.ai

n Changing the RU’s address  The “Local Area Connection Status” window opens.

n Changing a setting from the CL’s Service Utility

4. Click .

n Verifying the connection after  The “Local Area Connection Properties” window opens.
IP address changes

5. Choose and then click .

 The “Internet Protocol Version 4 (TCP/IPv4) Properties” window opens.

6. Choose .

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx IN5-1
 Appx IN5-2
7. Perform the following setup steps: n Changing the RU’s IP Address
I
u NOTE u
When the IP address of RU is changed, RU software installation is necessary. After the
IP address is changed, be sure to follow the procedures in the RU service manual for RU
software installation.
II 00000430.ai

I. Enter a new CL IP address (e.g., 200.150.100.10).

II. Enter a subnet mask.
1. Change the RU IP address.
For detail on the procedures for changing the RU IP address, see “Appendix 5

8. Click .
Changing the RU’s IP Address” under “Installation (IN)” of “FCR-MB 201 Reader
Unit Service Manual”.
 You are returned to the “Local Area Connection Properties” window.

9. Click .

 The system returns to the “Local Area Connection Status” window.

10. Click [Cancel].

 The system returns to the “Network and Sharing Center” window.

11. Close the “Network and Sharing Center”window.

 The system returns to the desktop screen.
 REFERENCE
When a window appears prompting you to restart the system, click [Yes].
Once the OS has started, the CL-AP will start up automatically.

10. Click .

 A menu opens.

11. Click .

12. Hold down the <Shift> key and click .

 The CL-AP exits and the system returns to the desktop screen.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx IN5-2
 Appx IN5-3
n Changing a setting from the CL’s Service Utility 4. Click [Setup Configuration Item].

1. From the menu, sequentially select “All Programs”, “Fuji Film”,

and “FCR”.
 The CL-AP starts up.

2. Within a period of 3 seconds after the initial window opens, sequentially

click the upper left and upper right corners of the window.
Click the upper left corner and then the upper right corner.

00000159.eps

MU000022.EPS
 The “Setup Configuration Item” window opens.
 The “Enter Password” window opens.
5. Click the sign within .

6. Click the sign within and then select .

 The “HostName” window opens in the right-hand area of the window.

7.
00000119.ai

Enter a new RU IP address (e.g., 200.150.100.50) in the

➥ REFERENCE
field.
If you cannot complete step 2. from the initial window within a 3-second period and
allow the AP to start up, perform the following steps to start the Service Utility:
8. Click .
1. To exit the AP, choose “Shut Down” from the menu.
2. Click while holding down the <Shift> key.
9. From the “Config (F)” menu, choose “Save”.
3. From the “Start” menu, sequentially choose “All Programs”, “Fuji Film”, and “FCR”.
 A window opens, prompting you to confirm the setup data to be saved.
4. When the initial window opens, sequentially click its upper left and upper right
corners within a period of 3 seconds.
10. Click .

 The system saves the setup data.

3. Enter a password (“**** ”) and click .
11. From the “Config (F)” menu, choose “Close”.
 The Service Utility starts up, and then the “IIP Service Utility” window opens.  The system returns to the “IIP Service Utility” window.

12. Click [Exit Service Utility].

 The system returns to the desktop screen.
014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx IN5-3
 Appx IN5-4
n Verifying the connection after IP address changes 6. Click .

1. From the menu, sequentially select “All Programs”, “Fuji Film”,

and “FCR”.
7. Hold down the <Shift> key and click .
 The CL-AP starts up in about one minute.
The RU initialization message appears on the CL monitor. The RU becomes  The CL-AP exits and the system returns to the desktop screen.
available in about two minutes.

CLP74006.EPS

2. From the CL user window (Registration), set patient data and exposure
menu, and then click .
 Both the CL-AP window lamp and the RU panel’s cassette insertion lamp go on.

3. Set the cassette in the RU’s cassette setting unit and make sure that images
are transferred to the CL.

➥ REFERENCE
Be sure not to incorrectly enter an IP address for “NETWORK CONFIG” – “ALL
OTHER NODES” – “ru0” settings, otherwise an image transfer error will be indicated.

4. Click at the lower right corner of the window.

5. Click .
 A menu opens.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx IN5-4
 Appx IN6-1

Appendix 6 Changing the RU Host Name n Changing the CL Service Utility settings

1. Start the Service Utility and then click [Setup Configuration Item].
Use RU PC-Tool to change the RU host name.
 The “Setup Configuration Item” window opens.

n Changing the RU host name

2. Within the tree in the left-hand area of the window, click the mark to
the left of , and then click the mark to the left of
1. Change the RU host name.
.
For detail on the procedures for changing the RU host name, see “Appendix 7
Installing the RU Software” under “Installation (IN)” of “FCR-MB 201 Reader Unit
Service Manual”. 3. Choose (the RU’s previously selected host name).

4. Change the entry in the upper right corner of the window

to a new RU host name (RU1).

5. Click .

6. From the tree in the left-hand area of the window, choose

, and then set the RU under “READER”
Function in the right-hand area of the window to “RU1 (new host name)”.
u NOTE u
Even if you change the RU settings registered in ALL OTHER NODES, it will not be
reflected to the “CONNECTING EQUIPMENT” window. Make sure to click “Modify”
to set the new RU.

7. Click .

8. From the “Config (F)” menu, choose “Save”.

 A window opens, prompting you to confirm the setup data to be saved.

9. Click .
 The system saves the setup data.

10. Select “Close” from the “Config (F)” menu.

 The system returns to the “IIP Service Utility” window.

The original network setup is then restored.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx IN6-1
 Appx IN6-2
BLANK PAGE

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx IN6-2
 Appx IN6-3
BLANK PAGE

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx IN6-3
 Appx IN6-4
BLANK PAGE

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx IN6-4
 Appx IN7-1

Appendix 7 Changing the CL IP Address 4. Click .

To connect a multiple number of CLs within the same network, the CL IP address must be  The ”Local Area Connection Properties“ window opens.
changed from the default setup value (172.16.1.20) to another.
In addition, the sub-net mask must also be changed from the default setup value 5. Select and then click .
(255.255.0.0) to another, for which the procedures described below should be followed.
 The ”Internet Protocol Version 4 (TCP/IPv4) Properties“ window opens.
u NOTE u
For a changed CL IP address, the FTP server IP address determined on the RU side and 6. Select .
the CL IP address must be change as well.

7. Change the IP address and sub-net mask.

1. Select “Control Panel” from the menu. I

 The “Control Panel” window opens.

2. Double-click . II IN000094.ai

I. IP address
II. Sub-net mask
 The “Network and Sharing Center” window opens.
8. Make the following settings.
3. Click “View status”. l when changing the Interface metric value

Click .

 The “Advanced TCP/IP Settings” window opens.

MBCL08070001.ai

MBCL08050001.ai l when not changing the Interface metric value

 The “Local Area Connection Status” window opens.
Go to the step 11.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx IN7-1
 Appx IN7-2
9. Remove the checkmark from “Automatic metric”, and set up a value for 14. Close the “Network and Sharing Center” window.
Interface metric.  The system returns to the desktop screen.
 REFERENCE
When a window appears prompting you to restart the system, click [Yes]. Once the
OS has started, the CL-AP will start up automatically.

This completes to change the CL IP address and sub-net mask.

MBCL08070002.ai

10. Click .

 The system returns to the “Internet Protocol Version 4 (TCP/IPv4) Properties” window.

11. Click .

 You are returned to the ”Local Area Connection Properties“ window.

12. Click .

 The system returns to the “Local Area Connection Status” window.

13. Click [Cancel].

 The system returns to the “Network and Sharing Center” window.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx IN7-2
 Appx IN7-3
BLANK PAGE

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx IN7-3
 Appx IN7-4
BLANK PAGE

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx IN7-4
 Appx IN8-1

Appendix 8 Uninstalling the APs

This appendix describes the procedures for uninstalling the following APs:
Ÿ CL-AP
Ÿ SQL Server
Ÿ Option keys
Ÿ Console software (Built_inConsole)
Ÿ FRIS Modules
 Synapse Client (Synapse Workstation)

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx IN8-1
 Appx IN8-2

1. CL-AP 4. Click .

 The uninstallation window opens.

1. Insert the CL-AP CD (2 of 2) into the DVD/CD drive. u NOTES u
 The “IIP Setup Tool” main menu automatically opens.  The message “Prepare Installation” appears here.
Note that the uninstallation process then starts, and not the installation process as
the message indicates.
 Click [OK] if a window like that shown below opens.

MBCL03060001.ai

➥ REFERENCE
When the “IIP Setup Tool” main menu does not open, start explorer and run the 00001475.ai

“Setup.bat” in the CD.

 Uninstallation ends in several seconds.

2. Enter “5” and then press the <Enter> key. 6. Close the “Programs and Features” window and the “IIP Setup Tool” main
 The “Programs and Features” window opens. menu window.

3. Select the CL-AP (displayed as “IIP” in the window) and click “Uninstall/
Change”.
 A confirmation window opens.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx IN8-2
 Appx IN8-3

2. SQL Server 7. Click in the upper left-hand area of the “Administrative Tools” window.

 The “Control Panel” window opens.

1. Select “Control Panel” from the menu.

 The “Control Panel” window opens.

8. Double-Click .

2. Double-Click .  The “Programs and Features” window opens.

 The “Administrative Tools” window opens. 9. Select “Microsoft SQL Server 2005” and then click “Uninstall/Change”.
 The “Microsoft SQL Server 2005 Uninstall” window opens.
3. Double-Click .
10. Select “MSSQLSERVER: Database Engine” and then click [Next].
 The “Computer Management” window opens.

4. Within the tree in the left-hand area of the window, select

─ ─

5. Within the tree in the right-hand area of the window,

right-click , select “Stop”.

00000486.ai

 A confirmation window opens.

11. Click “Finish”.

 The installation shield starts running to initiate an SQL Server uninstallation. After a
00000485.ai
while,Uninstallation ends. The system then returns to the “Programs and Features”
window.
6. Close the “Computer Management” window.
 The “Administrative Tools” window opens. 12. Close the “Programs and Features” window and then the “Control
Panel” window.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx IN8-3
 Appx IN8-4

3. Option Keys 4. Enter the uninstallation command in the “Open (O)” box and click .

The option key CD is required for uninstalling an option key. D:\option key's executable file name (xxxxxx.exe) /u

u NOTE u
 NOTE 
In the underlined portion, enter the drive name of the DVD/CD drive.
When uninstalling an option key, be sure to perform the following procedure. If, for
instance, you directly remove an option key with Registry Editor or the like, the option ➥ REFERENCE
name may remain in a user window although the option function is removed.
 To confirm the executable file name of an option key, you should directly view the
contents of CD from Explorer or the like.
1. Insert the CD for the option key you wish to uninstall into the DVD/CD drive. Example: Executable option file name for DX CL DICOM PRINT
- OptionDcmPrint.exe

2. The installation window opens.  You can click the button to select the executable file for the option key
to be uninstalled.
Press the button to close this window.
 A window opens to indicate that uninstallation is completed.
 NOTE 
If the window does not open automatically, this step can be skipped. 5. Click .

3. From the menu, select “All Programs” ─ “Accessories” ─ “Run...”.

 The “Run...” window opens.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx IN8-4
 Appx IN8-5

4. Console Software (Built_inConsole) 4. Click .

 The install shield starts running and begins to uninstall the MSDE.
 NOTE  After a while, the “Shared Component” window opens.
After the console software is uninstalled, be sure to reinstall the console software.
The CL-AP does not start running when the console software is uninstalled.

1. Insert the CL-AP CD (2 of 2) into the DVD/CD drive.

 The “IIP Setup Tool” main menu automatically opens. RI000009.ai

5. Click .

 The “Application Removal” window opens.

MBCL03060001.ai 6. Click .
➥ REFERENCE  The “Application Removal” window opens.
When the “IIP Setup Tool” main menu does not open, start explorer and run the
“Setup.bat” in the CD.
7. Click .
 The system then returns to the “Programs and Features” window.
2. Enter “5” and then press the <Enter> key.
 The “Programs and Features” window opens.
8. Close the “Programs and Features” window and then the “Control Panel”
window.
3. Select “Built_inConsole” and then click “Uninstall/Change”.
 The “Application Removal” window opens.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx IN8-5
 Appx IN8-6

5. FRIS Modules [Applicable only in Japan]

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx IN8-6
 Appx IN8-7

6. Synapse Client Software (Synapse Workstation) 8. If the CL-AP exit after the PC restart, click the upperright and -left corners
of the window once each to have the Service Utility be displayed. Then shut
down the Service Utility.
1. Insert the CL-AP CD (2 of 2) into the DVD/CD drive. For how to start up Service Utility, see “1. Starting/Exiting the Service Utility”
 The “IIP Setup Tool” main menu automatically opens. under “Maintenance Utility (MU)”.

9. Open the “C:\WINDOWS\Download Program Files” folders.

10. Right-click “Synapse Medical Imaging Workstation” and select “Remove”.

MBCL03060001.ai

➥ REFERENCE
When the “IIP Setup Tool” main menu does not open, start explorer and run the
“Setup.bat” in the CD.

2. Enter “5” and then press the <Enter> key.

 The “Programs and Features” window opens.

3. Select “Synapse” and click “Change/Remove”.

 The “WARNING” window opens. CLP88501.ai

 The confirmation window opens.

4. Click .

 The same window opens again.

5. Click .

 After a while, the “Downloaded Program Files” window opens automatically. CLP88502.ai

6. Click the symbol at the upper right-corner of the window to close the 11. Click .
“Downloaded Program Files” window.
 The system returns to the desktop.
12. Close the “Downloaded Program Files”.
7. Restart the PC.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx IN8-7
 Appx IN8-8
BLANK PAGE

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx IN8-8
 Appx IN9-1

Appendix 9 Changing the CL Host Name n Uninstalling the SQL Server

For the procedure for uninstalling the SQL Server, see “Appendix 8 Uninstalling the
APs”.
u NOTES u
Ÿ When changing the CL’s host name, be sure to follow the sequence indicated below.
If you do not use the correct procedure to change the host name, the CL-AP may
become inoperative.
Ÿ Change host names of the CLs registered on the RU side, as necessary, so as to avoid
confusion with other CLs. (No operational problems occur even if they are not changed.)

n Uninstalling the SQL Server

n Confirming the Service Utility Settings

(Confirmation of media property setup)

n Changing the CL-PC host name

n Installing the SQL Server

n Rebuilding the image database

n Setting the Service Utility

n Initializing the image database Use this procedure only when

[as required] you want to remove images
from the HDD.
* If you wish to retain images,
do not perform this procedure.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx IN9-1
 Appx IN9-2
n Confirming the Service Utility Settings 5. Take notes of the following settings.
(Confirmation of media property setup) Ÿ Abstract Syntax Ÿ Role
Ÿ Transfer Syntax Ÿ MultiByte
u NOTE u Ÿ Timeout1 Ÿ Attribute
When you register MEDIA setup with a new host name, the existing settings are required. Ÿ Acceptable Density Ÿ Default Output Density
Make sure to take notes of all the settings. Ÿ Send Annotation Information

1. Start the Service Utility and then click [Setup Configuration Item].
 The “Setup Configuration Item” window opens.

2. Within the tree in the left-hand area of the window, select

─ ─
(the CL host name before the change)─
─ .

3. Take notes of settings of “Application Entity” and “Drive”.

CLP0809005.EPS
MBCL08090001.ai

4. Click [Modify]. 6. Click [Cancel].

 The “MEDIASetup” window opens.

7. From the “Config (F)” menu, select “Close”.
 The system returns to the “IIP Service Utility” window.

8. Click [Exit Service Utility].

 The system returns to the desktop screen.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx IN9-2
 Appx IN9-3
n Changing the CL-PC host name 5. Click .

 A window like that shown below opens.

1. Select “Control Panel” from the menu.

 The “Control Panel” window opens.

2. Double-click .

RI0000361.ai

 The “System” window opens.

6. Click .
3. Click .  The system returns to the “System Properties” window.

 The “System Properties” window opens.

7. Click .
4. Perform the following settings.  A window opens to prompt for a restart.
 Click the “Computer Name” tab.

8. Click .

RI0000359.ai

9. Within a period of 3 seconds after the initial window opens, sequentially

 Click . click the upper left corner and then the upper right corner.
 The “Computer Name/Domain Changes” window opens.  The “Enter Password” window opens.

 Change the host name of the “Computer name” field.

10. Click “Cancel”.

Change

RI0000360.ai

 NOTE 
For the changed host name, be sure to set it with 10 letters or less.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx IN9-3
 Appx IN9-4
n Installing the SQL Server n Rebuilding the image database
For the SQL Server installation procedure, see “5. Installing the Database
Management System” in “Checks, Replacement and Adjustment of Parts (MC)”. 1. Select “All Programs” ─ “Accessories” ─ “Run...” from the menu.

u NOTE u Use then the key to select necessary files located in the
When SQL Server and service pack are installed, the PC is forced to restart. After a directories below:
restart, the CL-AP automatically starts up; however, an error occurs because the image
database is not rebuilt. C:\Program Files\FujiFilm\IIP\Temp\AttachAll.bat
In this instance, just click [OK] to close the error window.
The system recovers from this error when you rebuild the image database. u NOTE u
Do not execute the above command from the MS-DOS prompt.

2. Click .

 The MS-DOS prompt window then opens, displaying the message “Press any key to
continue ...”.

00000484.EPS

3. Press the <Enter> key.

 The MS-DOS prompt window closes. The image database is thus completely rebuilt.
This makes it possible to use again HDD images that have been available before CL
host name change.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx IN9-4
 Appx IN9-5
n Setting the Service Utility l Deleting the MEDIA property
When you change the CL’s host name, the Service Utility’s network setup for this
equipment changes to that for other connected equipment. 1. Click [Setup Configuration Item].
Therefore, you have to restore the original network setup as directed below:  The “Setup Configuration Item” window opens.

l Changing the Host Name

2. Within the tree in the left-hand area of the window, select
1. Start the Service Utility and then click [Setup Configuration Item]. ─ ─
 The “Setup Configuration Item” window opens. (the CL host name before the change)─
─ .

2. Within the tree in the left-hand area of the window, click the mark to
the left of , and then click the mark to the left of
.
3. Click with is selected.

 MEDIA property is deleted and disappeared from the tree in the left-hand area of the
3. Choose (CL’s previous host name). window.

4. From the “Config” menu, choose “Save”.

4. Change the entry in the upper right corner of the  A window opens, prompting you to confirm the setup data to be saved.

window to a new host name.

5. Click .

5. Click .  The system saves the setup data.

6. From the “Config” menu, choose “Save”.

 A window opens, prompting you to confirm the setup data to be saved.

7. Click .

 The system saves the setup data.

8. From the “Config (F)” menu, select “Close”.

 The system returns to the “IIP Service Utility” window.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx IN9-5
 Appx IN9-6
l Registering the MEDIA property 6. Select the existing settings for items such as “Abstract Syntax”, “Role”,
and “Transfer Syntax”.
1. Within the tree in the left-hand area of the window, select
─ . u NOTE u
Be sure to enter the data that you took notes in the step 5 of ‘‘n Confirming the
Service Utility Settings (Confirmation of media property setup)’’.
2. Click .

 The “New Node” window opens.

3. Select “MEDIA”, click .

CLP0809001.EPS CLP0809003.EPS

 The “Application Entity List” window opens.

7. Click .

4. Enter the existing settings in “Application Entity Name” and “Drive”.

 The system returns to the “Application Entity List” window.
u NOTE u
Be sure to enter the data that you took notes in the step 3 of ‘‘ n Confirming the 8. Click .
Service Utility Settings (Confirmation of media property setup)’’.
 The system returns to the “Setup Configuration Item” window.

9. From the “Config” menu, choose “Save”.

 A window opens, prompting you to confirm the setup data to be saved.

10. Click .

MBCL08090002.ai
 The system saves the setup data.

11. From the “Config (F)” menu, select “Close”.

5. Click .
 The system returns to the “IIP Service Utility” window.
 The “MEDIASetup” window opens. 12. Click [Exit Service Utility].
 The system returns to the desktop screen.

The original network setup is then restored.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx IN9-6
 Appx IN9-7
l Changing the log information sharing function (Log Share) settings n Initializing the image database [as required]
When settings for the log information sharing function (Log Share) were performed for u NOTE u
the purpose of the IP use count calculation function or the RetakeAnalysis function, be If you wish to retain images stored in the HDD, do not initialize the image database.
sure to change Log Share settings for other CLs after host name of a CL unit has been Initializing the image database deletes all images from the HDD.
changed. The procedure to be performed is as described below.

➥ REFERENCE 1. Initialize the image database with the Service Utility.

Settings performed for this Equipment are changed automatically when a host name is For the image database initialization procedure, see “11. Initializing the Image
changed. Database” in “Checks, Replacement and Adjustment of Parts (MC)”.
 The CL host name change procedure is now completed.
1. Click [Setup Configuration Item].
 The “Setup Configuration Item” window opens.

2. Click .

3. Select host name and IP address of the CL that are to be changed.

4. Click .

 The “Log Share” window opens.

5. Enter the changed host name in the “HostName” box.

6. Click .

7. To change settings of other CLs, repeat steps 3 to 6, above, as required.

8. Save the setup data from the “Config (F)” menu.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx IN9-7
 Appx IN9-8
BLANK PAGE

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx IN9-8
 Appx IN10-1

Appendix 10 Upgrading the AP

This appendix describes the CL-AP upgrade procedures.

➤ IMPORTANT
Before upgrading the AP, verify that there are no patients reserved for exposure (no
patients are registered in the examination queue window).
Also, check that no image is left in the QA queue or output queue.

Upgrade the CL-AP by performing the following steps:

Description Reinstalling CL-AP

Step (correlating to the subsequent titles
prefixed by the n mark) V1.0  V1.0

1 n Exiting thePPS Monitor *1 m

2 n Uninstalling the CL-AP m
3 n Installing the CL-AP m
4 n Installing the PPS cache server *1 m
*1 Necessary only if DICOM PPS function is used.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx IN10-1
 Appx IN10-2
n Exiting the PPS Monitor n Uninstalling the CL-AP

u NOTE u u NOTE u
When PPS cache server is updated, setting content is not converted. For the institution that uses the exposure record file output function or the comment entry
Be sure to take notes of setting content before terminating PPS Monitor. function for mis-exposed image, perform the following procedures before uninstallation.
For details, see “2.6 The environment setting of PPS” in “Appendix 15 RIS:DICOM 1. Startup the CL-AP.
MWM / DICOM PPS”.
2. Select “Utilities” in the menu.

1. Simultaneously press the <Ctrl>, <Shift>, and <Esc> key. ➔ User utilities starts running.

 The “Windows Task Manager” window opens. 3. Save the mis-exposed image log or exposure result log by the exposure log
saving function.
2. Select the “Application” tab. 4. Shut down the user utilities while pressing down the <Shift> key.
➔ The system returns to the desktop screen.
3. Select the “PPS Monitor”, click “End Task”.
 Exiting the “PPS Monitor”.
1. Insert the CL-AP CD (2 of 2) into the DVD/CD drive.

4. Close the “Windows Task Manager” window.  The “IIP Setup Tool” main menu automatically opens

MBCL03060001.ai

➥ REFERENCE
When the “IIP Setup Tool” main menu does not open, start explorer and run the
“Setup.bat” in the CD.

2. Enter “5” and then press the <Enter> key.

 The “Programs and Features” window opens.

3. Select the CL-AP (displayed as “IIP” in the window) and click “Uninstall/
Change”.
 A confirmation window opens.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx IN10-2
 Appx IN10-3
4. Click . n Installing the CL-AP

 The uninstallation window opens.

1. From the IIP Setup Tool main menu, enter in “2” and then press the <Enter>
u NOTES u key.
Ÿ The message “Prepare Installation” appears here. Note that the uninstallation
process then starts, and not the installation process as the message indicates.
 Click [OK] if a window like that shown below opens.

MBCL03060001.ai

 The following window opens.

RI000228.ai

Ÿ When DICOM PPS function is used, the warning message is displayed that
indicates PPS Monitor is not terminated. If the warning is displayed, be sure to
cancel uninstallation of CL-AP, terminate PPS Monitor, and then install CL-AP
again.
CLP88002.EPS

Proper operation is not guaranteed if you selected “Ignore” and continued

uninstallation. 2. Enter “1” and then press the <Enter> key.
 The installer starts running and opens the “IIP Setup/Welcome to the ...” window.
 Uninstallation ends in several seconds.

5. Close the “Programs and Features” window.

 The system returns to the “IIP Setup Tool” main menu.
00000178.eps

3. Click .

 The “IIP Setup/Setup Type” window opens.

00000180.eps

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx IN10-3
 Appx IN10-4
4. Click . 6. Press the <Enter> key.
 In a few seconds, the following window opens.
 In a few seconds, the following window opens.

RI000026.EPS

u NOTE u
Although a message saying that “Image Database does not exist.” can appear, the
CL-AP installation processing will not be affected.

CLP8A004.ai

7. Press the <Enter> key.

CLP88005.EPS
 In a few seconds, the following window opens.

5. Press the <Enter> key.

 In a few seconds, the following window opens.

CLP88007.EPS

8. Press the <Enter> key.

 In a few seconds, the following window opens.

CLP88006.EPS

CLP88008.EPS

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx IN10-4
 Appx IN10-5
9. Press the <Enter> key.
 In a few seconds, the following window opens.

CLP88009.EPS

10. Press the <Enter> key.

 Upon completion of installation, the “IIP Setup/Completing the IIP...” window opens.

00000181.eps

11. Click .

 The system returns to the “IIP Setup Tool” main menu.

12. Enter “0” and then press the <Enter> key.

 The system returns to the desktop screen.

13. Remove the CD from the DVD/CD drive.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx IN10-5
 Appx IN10-6
n Installing the PPS cache server 2. Enter “17” and then press the <Enter> key.
 The “PPS_CS Setup” window opens.
l Installing the PPS cache server

u NOTE u
If PPS cache server is already installed, the PPS cache server has to be uninstalled.
For the procedure for uninstalling, see “2.1.2 DICOM PPS Option Key Installation” in
“Appendix 15 RIS:DICOM MWM / DICOM PPS”. CLP8A001.EPS

Also, be sure to take notes of setting content before terminating PPS Monitor because
setting content is not converted. 3. Click .
For details, see “2.6 The environment setting of PPS” in “Appendix 15 RIS:DICOM
 The following window opens.
MWM / DICOM PPS”.

1. Insert the CL-AP CD (2 of 2) into the DVD/CD drive.

 The “IIP Setup Tool” main menu automatically opens

CLP8A002.EPS

4. Click .

 The following window opens.

CLP8A003.EPS

5. Click .

 The system returns to the “IIP Setup Tool” main menu.

MBCL08200001.ai

➥ REFERENCE
When the “IIP Setup Tool” main menu does not open, start explorer and run the 6. Enter “0” and then press the <Enter> key.
“Setup.bat” in the CD.  The system returns to the desktop screen.

7. Remove the CD from the DVD/CD drive.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx IN10-6
 Appx IN10-7
BLANK PAGE

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx IN10-7
 Appx IN10-8
BLANK PAGE

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx IN10-8
 Appx IN11-1

Appendix 11 Setup for Security Enhancement n Replacing the default password with a new password

1. Simultaneously press the <Ctrl>, <Alt>, and <Delete> keys.

To provide CL security enhancement, complete the following three setup procedures.
 The “Windows Security” window opens.
Ÿ Replacing the default password with a new password
Ÿ Changing the setup so that the computer prompts for password input at logon
Ÿ Defining the minimum character count for the password
2. Click the [Change Password...] button.

 NOTE 
Settings performed for password change and prompt for password input at login will not
start up the CL automatically. To have it start up automatically, it is necessary to input the
user name and the password on the Windows initial screen.

DCL8A008.ai

 The “Change Password” window opens.

3. From the “Change Password” window, perform the following setup steps.

I
II
III

DCL8A0

I. Enter the currently used password (**** by default).

II. Enter a new password consisting of no more than seven characters.
III. Enter the new password again for confirmation.

4. Click .

 “Your password has been changed.” is displayed.

5. Click [OK].
 The system returns to the desktop screen.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx IN11-1
 Appx IN11-2
n Changing the setup so that the computer prompts for
password input at logon

1. From the menu, enter the “control userpassword2” in the Start

Search field and press the <Enter> key.

DCL8A006.ai

 The “User Accounts” window opens.

2. Place a checkmark to “Users must enter a user name and password to

use this computer.” ( ➔ ).

DCL8A007.ai

3. Click .

 The system returns to the desktop screen.

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx IN11-2
 Appx IN11-3
n Defining the minimum character count for the password 5. Click .

 The system returns to the “Local Security Settings” window.

1. Open “Control Panel”. Double-click and then .

6. Close the “Local Security Settings” window.

 The “Local Security Settings” window opens. 7. Close the “Administrative Tools” window.

DCL8A003.ai

2. Click the mark for and then click .

 The right-hand pane shows the password policy settings.

3. Double-click .

 The “Local Security Policy Setting” window opens.

4. Set the number of password characters to “7”.

DCL8A004.ai

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx IN11-3
 Appx IN11-4
BLANK PAGE

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual Appx IN11-4
 PC-I

FCR-MB 201 Console

Service Manual

Performance Check (PC)

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual PC-I
 PC-II
Control Sheet
Issue date Revision number Reason Pages affected
10/29/2010 01 New release (FM5797) All pages

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual PC-II
 PC-1

FCR-MB 201 Console Performance Checklist Ÿ CL startup verification

Ÿ CL setup for connection with other equipment
¨ OK ¨ NG
¨ OK ¨ NG
The purpose of this checklist is to document the steps performed and settings determined IP address : ( ________________________ )
during installation of the FCR-MB 201 Console in accordance with the instructions of Subnet mask : ( ________________________ )
the FCR-MB 201 Console Service Manual. This checklist is not intended to replace the Host name : ( ________________________ )
installation workflow described in the service manual but to be followed concurrently. Default gateway : ( ________________________ )
Check system connections and output images not only during installation but also after Ÿ Registered AE title
servicing to ensure correct operation of the system prior to its delivery to the customer. Printer : ( )
Storage (server) : ( )
Storage (viewer) : ( )
Installation information Software version : ( )
Ÿ Checking the work list ¨ OK ¨ NG
Equipment S/N : Software Ver. :
Site Name : Installed by :
3. Checkout Procedures
Site Number : Signature :
“4. Checkout Procedures” under “Installation (IN)”
Room Name : Date of Installation/Servicing :
Ÿ Checking the connection between CL and RU ¨ OK ¨ NG
Ÿ Checking the connection between CL and other equipment ¨ OK ¨ NG
X-CON connection ¨ (maker/model )
Checklist MWM/PPS connection ¨ (maker/model )
DAP connection ¨ (maker/model )
1. CL Hardware Setup
Ÿ Checking output images ¨ OK ¨ NG
“2. CL Hardware Setup” under “Installation (IN)”
Printer ¨ (maker/model )
Ÿ Checking the items supplied ¨ OK ¨ NG
Storage (server) ¨ (maker/model )
Equipment main unit ¨ Accessories ¨
Storage (viewer) ¨ (maker/model )

2. Software Setup 4. Setup File Backup and RU Error Log Verification/Deletion

“3. CL Software Setup” under “Installation (IN)” “5. Setup File Backup, Image Database Initialization and Error Log Verification/
Ÿ Setting/checking the PC system date and time ¨ OK ¨ NG Deletion” under “Installation (IN)”
Ÿ Installing the option key ¨ OK ¨ NG Ÿ Making backup copies of setup files ¨ OK ¨ NG
¨ DICOM PRINT ¨ DICOM ORDER MWM
¨ DICOM ID MWM ¨ DICOM MPPS 5. Overall Test ¨ OK ¨ NG
¨ DELUX-QA ¨ GPR
¨ SHUTTER-PROC ¨ IM COMPOSITION 6. Storing final Output Films at the Customer Site
¨ QC TEST SOFT ¨ ANNOTATION as the Records of the Performance Verification ¨ OK ¨ NG
¨ ID ONLINE ¨ RetakeAnalysis
¨ DICOM COMMITMENT

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual PC-1
 PC-2

FCR-MB 201 Console Config List Check No. Name Setup Value
38 Link User Account to Operator's Name
UID Issuance about a function (except Image Processing)
39
1. IMAGE MODALITY to change to the image themselves
40 Rotate the 2nd Stitching Image
Check No. Name Setup Value
41 Rotate the 3rd Stitching Image
1 System Common Date Format
42 Enable Stitching Edge Adjustment
2 Alert MSG Display When Deleting Image
43 Cut IP Edge for Stitching
3 Activate Error Recovery Retrial
45 UID Issuance after Modifying Trimming Parameter
4 Institute/Site Name Strings
46 UID Issuance after Modifying FNC Parameter
5 IP Size by inch or Metric
48 Apply GS Filter To 8 x 10 / 1824 Image
7 Language Setup for Screen Message
49 Kind of the image used for the displaying
8 Institute/Site Name in Two-Byte Characters
51 Use Reject Comment
9 UID Issuance after Modifying ID Information
52 Time Until Auto Log Off
10 UID Issuance after Modifying Normalized Parameter
55 Gradients(x10) of LUT used for Preview Image
11 UID Issuance after Modifying Image Processing Parameter
56 Use Password Security
12 UID Issuance Before Sending Processed Data
57 Password for PAS Security
13 DICOM Series Generation Logic
67 Use Service Utility Password
14 System Recognition ID (A to Z)
68 Software KeyBoard Program Path
15 User Utility Password Required or Not
69 USB Memory Security Soft Path
16 SOP Class UID for PPS When No FILE Attribute Output
72 Enable Exposure Index Function
17 Protocol Name for PPS
18 Display Performed Procedure on Worklist Tab
21 Connection Between Reader and Console
22 Long Type Character Format
23 Tag Mapped on Study Menu at MWM Use
24 Perform Mapping to Exposure Menu at MWM Use
Display Dialog When Failed in Mapping to Menu at MWM
25
Use
26 Use Study InstanceUID from RIS
27 StudyInstanceUID Generation Logic
29 Image Number Generation Logic
32 Kind of Print Image (Image Combining Process)
33 Kind of Transfer Image (Image Combining Process)
34 Enable Statistical Info.Output
36 Administrator Password
37 Enable Security Function

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual PC-2
 PC-3
2. QA FUNCTION 3. PRINTER
Check No. Name Setup Value Check No. Name Setup Value
1 Enable Image Proc. Param Update Flag 10 Black Margin Setup on Film Edge
3 Use Dialog for Choosing Folder to Save Jpeg Image 11 Trimming Range [mm]
4 Destination Path of JPEG File 13 Print Barcode
5 Filename Format of JPEG Information 14 Print EDR Mode
6 JPEG Image Processing Use CrtLut 15 Print Image Process Condition
7 Alert MSG Display When Output 16 Print L, S, CS, SS Condition
8 Display Save Button 17 Print Shot Time
9 Alert MSG Display When Save 18 Print Set Process
10 Alert MSG Display When Image Changed 19 Print Engineer ID
11 Enable Dicom File Storage 20 Print Menu Name
12 Transfer Syntax Used When Using Dicom File Storage 21 Print Compression Rate
13 Save Multibyte Code When Using Dicom File Storage Print Image Frame (3543film:14x17, 14x14, 18x43/
Save Annotation Information When Using Dicom File 23 3535film:14x14/2636film:10x14/2025film:8x10, 18x24
14 Single Format)
Storage
15 DCM File Image Processing Use CrtLut Print Image Frame (3543 film:18x43 LR/2on1 Format)LR/
24
2on1 Format)
20 Alert MSG Type When Patient Information will be Modified
Print Image Frame (3543 film:14x17, 18x43, 8x10 4on1
25
Format)
Print Image Frame (2636 film:18x24, 24x30/2025 film:18x24
27
Single Mammography Format)
Print Image Frame (2636 film:18x24 2on1 100%
28
Mammography Format)
29 No Print Scale (User Definition Rules)
30 Representation of Age
31 Print Reverse Mark
Print Film Character Field (14x17-S/4on1, 18x43-LR/2on1/
32 4on1, 8x10-4on1, 14x14-S,10x14-S, 18x24-LR/2on1,
8x10/18x24-S Format)
33 Print Film Char 2/Examination number
Size Selection of 3543, 3535, 2636, 2025 Film
34
Character(Single Format)
3543 Film Character Field Position & Rotation (14x17
35
Image)
3543 Film Character Field Position & Rotation (17x14
36
Image)

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual PC-3
 PC-4
Check No. Name Setup Value Check No. Name Setup Value
3543 Film Character Field Position & Rotation (18x43 2636 Film Character Field Position & Rotation (14x10
37 66
Image) Image)
3543,2025 Film Character Field Position & Rotation (3543 2636 Film Character Field Position & Rotation (2636
38 67
Film:8x10-4on1, 2025 Film:8x10-Single) film:18x24-LR)
2025 (Landscape)Film Character Field Position & Rotation 2636 Film Character Field Position & Rotation (2636
39 68
(8x10,18x24-Single) film:18x24-2on1)
Film Character Field position & rotation (User Definition 69 Print Image Frame (2636 film:18x24-LR, 2on1 Format)
40
Rules1) 70 Reduction Rate (2636 film:18x24-LR, 2on1 Format)
Film Character Field position & rotation (User Definition 71 Print Priority in Dicom Print
41
Rules2)
2530 Film Character Field Position Rotation (10x12,
Film Character Field position & rotation (User Definition 72
42 2430-Single)
Rules3)
2530(Landscape)Film Character Field Position Rotation
Film Character Field position & rotation (User Definition 73
43 (10x12, 2430-Single)
Rules4)
75 Lifesize Film Character Field Position & Rotation
Film Character Field position & rotation (User Definition
44 76 Overlap width(mm) of the Lifesize Film
Rules5)
Film Character Field position & rotation (User Definition 81 Reduction Rate (8x10,2on1 Film Format)
45
Rules6) Enable Image Frame (8x10,100%-Size Image 2on1 Film
82
46 Image Area Move to the Top of 3543 Film Format)

47 Patient's Name Length on Film Film Character Field Position & Rotation(8x10,100%-Size
83
Image 2on1 Film Format)
48 Patient's Name Length on Film (Multibyte)
Film Character Field Position & Rotation(8x14,100%-Size
49 Patient's Name Justify on Film 84
Image 2on1 Film Format)
50 Menu Name Length on Film Film Character Field Position & Rotation(7x8,100%-Size
85
51 Menu Name Length on Film (Multibyte) Image 4on1 Film Format)
52 Menu Name Justify on Film Film Character Field Position & Rotation(7x10,100%-Size
86
53 Department Name Length on Film Image 2on1 Film Format)

54 Department Name Length on Film (Multibyte) 88 15x30 ExFormat For 14x10 Film

55 Department Name Justify on Film 89 15x30 ExFormat For 10x8 Film

56 Enable Auto Edit Function of Film String Format File Setting of minimum scale to be cut off the ends of Lifi-size
90
Output (cm).
58 Font Size of Requesting Service
91 Type of processing multi-frame format.
59 Format Type of Operator's Name
60 Display Image Feature
3535 Film Character Field Position & Rotation (Single
63
Format)
64 Enable Reduce To 8x10 Film
2636 Film Character Field Position & Rotation (10x14
65
Image)

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual PC-4
 PC-5
4. CSL/IDT FUNCTION Check No. Name Setup Value
39 Ip Address of RIS Server (Type-IDC4)
Check No. Name Setup Value
40 Port Number for RIS Server (Type-IDC4)
1 AutoMenuSelect
42 Wait Time for Performed Exposure Info. from Xcon
2 Default Menu Code for Unregistrated Image
43 Xcon Status Display Strings
3 Enable Distribution Code
44 Xcon Serial_TX Control Port
4 Enable Film String
45 Xcon Performed Info. Reception
5 Enable Function Setup
46 Xcon Exposure Info.Transfer
6 Enable Pantomography Processing
47 Xcon Exposure Info. Limit Value (Minimum KVP [kV])
7 Enable Performance Data (RIS)
48 Xcon Exposure Info. Limit Value (Maximum KVP [kV])
9 Enable Requesting Dept. Name Field
Xcon Exposure Info. Limit Value (Minimum X-ray Tube
10 Enable Technologist Name Field 49
Current [mA])
11 Image Rotation/Reversal Range Xcon Exposure Info. Limit Value (Maximum X-ray Tube
50
12 EDR Mode Setup Current [mA])
13 Image Data Filing Mode Setup Xcon Exposure Info. Limit Value (Minimum Exposure Time
51
15 Examination No. Length [msec])

16 Examination No. Padding Method Xcon Exposure Info. Limit Value (Maximum Exposure Time
52
[msec])
17 Patient ID Length
53 Xcon Exposure Info. Limit Value (Minimum Reserve 1)
18 Patient ID Padding Method
54 Xcon Exposure Info. Limit Value (Maximum Reserve 1)
19 Reception No. Length
56 Enable Patient Info.DB Function
20 Reception No.Padding Method
57 Max. Number of Patient Info.
21 Exposure List Erasure Setup
64 MWM RIS Trigger Port
22 Requesting Dept. Name Field Setup
65 MWM RIS Trigger Timeout
23 Technician's Name Filed Setup
66 MWM Execute Study Type
26 MCR Customized Card
74 Search Order of Patient Info.
27 MCR Card Type (JIS/ISO)
75 Patient ID# is Unique
28 MCR Card Format Setup
76 PPS Exposure Status Sequence
29 Study Number Issuance Logic Setup
80 Enable Auto Menu Creation
30 Technician's Code Length
81 Enable Continuous Barcode Read
31 ID Online Acquisition Info. Code Setup
82 Selection Type of Requesting Service
33 ID Online Interface Format
83 Default Requesting Service
34 ID Online/Offline Switching Timeout
84 Barcode Type for Search on List
35 ID Online Requesting Timeout
87 PPS Edit Billing Supplies
36 ID Online Search Key
88 PPS Edit Exposure Result
37 ID Online Type
89 MWM Menu Name Mapping
38 Host Name of RIS Server (Type-IDC4)
90 PPS Exposure Status Mapping Tag

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual PC-5
 PC-6
Check No. Name Setup Value Check No. Name Setup Value
91 PPS Exposure Status Mapping Kind 186 Reverse Marker Position [%] (X\Y)
92 PPS N-SET Timming 187 Reverse Marker Color (Fore Color-Back Color)
93 Use Distribution Code Depart Name
94 Film Size Setup
95 Recept Computer Type 5. CONFIG OPTION
96 Kanji Patient's Name Auto Convert Check No. Name Setup Value
97 Recept Computer Info File Share Folder 2 Enable Timming Function
98 Recept Computer Info File Polling Interval ([sec]) 3 Enable Reader QC Function
99 Recept Computer Info File Type 4 Enable Display Previous Study Function
100 Recept Computer Info File Temporal Folder 5 Enable Synapse WebQuery
105 Do Next Study At Study Screen With End Button Click 7 Enable RetakeAnalysis Function
107 Enable mAs Value Recalculation 13 Enable Connecting DAP Directly

111 Xcon Serial_TX Baudrate

112 Xcon No-Response Timeout
113 Xcon Data Reception Timeout
6. CONFIG QC
115 Synapse Host for Web Query Check No. Name Setup Value
116 Web Query Root Path 1 Visible QCRecord Delete Button
120 Xcon No-Data Default Output 2 Destination Path of QC Record File
122 External Character Conversion
123 MWM Not Received Condition Delete Study
131 Enable MultipleStudy
134 MWM StudyInstanceUID Regeneration
140 Enable IP Use Count List
142 Xcon Serial_TX Parity
164 Use PPS Cache Server
165 Enable Auto Maker
172 Exposure uAs Min
173 Exposure uAs Max
177 DAP Serial_TX Parity
178 DAP Serial_TX Control port
179 DAP Message Trial Count
180 DAP Address
181 Wait Time for Response. From DAP
182 Dap Status Display Strings
185 Enable Display Reverse Marker

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual PC-6
 PC-7

FCR-MB 201 Console System Configuration List

Equipment Host Name IP address Function AE name Port No. Service Class Transfer Syntax
CL (This equipment) . . . CL
CL (This equipment) . . . DICOM PRINT
CL (This equipment) . . . DICOM Storage
CL (This equipment) . . . DICOM MWM
CL (This equipment) . . . DICOM PPS
CL (This equipment) . . . DICOM Media Storage
. . . FRUP
. . . DICOM PRINT
. . . DICOM PRINT
. . . DICOM PRINT
. . . DICOM Storage
. . . DICOM Storage
. . . DICOM Storage
. . . DICOM MWM
. . . DICOM PPS
. . .
. . .

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual PC-7
 PC-8
BLANK PAGE

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual PC-8
 PC-9
BLANK PAGE

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual PC-9
 PC-10
BLANK PAGE

014-238-01E
10.29.2010 FM5797
FCR-MB 201 Console Service Manual PC-10