Data sheet 3RP2505-1AW30
Timing relay, Multifunction 1 change-over contact, 13 functions 7
time ranges (0.05 s...100 h) 12...240 V AC/DC at 50/60 Hz AC with
LED, Screw terminal
Product brand name SIRIUS
Product designation timing relay
Design of the product 13 functions
Product type designation 3RP25
General technical data
Product component
● Relay output Yes
● semi-conductor output No
Product extension required remote control No
Product extension optional remote control No
Insulation voltage
● for overvoltage category III according to IEC
60664
— with degree of pollution 3 rated value 300 V
Test voltage for isolation test 2.5 kV
Degree of pollution 3
Surge voltage resistance rated value 4 000 V
Protection class IP IP20
Shock resistance
3RP2505-1AW30 Subject to change without notice
Page 1/8 11/27/2019 © Copyright Siemens
● acc. to IEC 60068-2-27 11g / 15 ms
Vibration resistance
● acc. to IEC 60068-2-6 10 ... 55 Hz / 0.35 mm
Mechanical service life (switching cycles)
● typical 10 000 000
Electrical endurance (switching cycles)
● at AC-15 at 230 V typical 100 000
Adjustable time 0.05 s ... 100 h
Relative setting accuracy relating to full-scale value 5%
Thermal current 5A
Minimum ON period 35 ms
Recovery time 250 ms
Reference code acc. to DIN 40719 extended K
according to IEC 204-2 acc. to IEC 750
Reference code acc. to DIN EN 81346-2 K
Reference code acc. to DIN EN 61346-2 K
Relative repeat accuracy 1%
Control circuit/ Control
Type of voltage of the control supply voltage AC/DC
Control supply voltage 1 at AC
● at 50 Hz 12 ... 240 V
● at 60 Hz 12 ... 240 V
Control supply voltage frequency 1 50 ... 60 Hz
Control supply voltage 1
● at DC 12 ... 240 V
Operating range factor control supply voltage rated
value at DC
● initial value 0.8
● Full-scale value 1.1
Operating range factor control supply voltage rated
value at AC at 50 Hz
● initial value 0.85
● Full-scale value 1.1
Operating range factor control supply voltage rated
value at AC at 60 Hz
● initial value 0.85
● Full-scale value 1.1
Inrush current peak
● at 24 V 0.4 A
● at 240 V 5A
Duration of inrush current peak
● at 24 V 0.3 ms
● at 240 V 0.5 ms
3RP2505-1AW30 Subject to change without notice
Page 2/8 11/27/2019 © Copyright Siemens
Switching Function
Switching function
● ON-delay Yes
● ON-delay/instantaneous contact No
● passing make contact Yes
● passing make contact/instantaneous contact No
● OFF delay No
Switching function
● flashing symmetrically starting with No
interval/instantaneous
● flashing symmetrically starting with interval Yes
● flashing symmetrically starting with No
pulse/instantaneous
● flashing symmetrically starting with pulse Yes
● flashing asymmetrically starting with interval No
● flashing asymmetrically starting with pulse No
Switching function
● star-delta circuit with delay time No
● star-delta circuit No
Switching function with control signal
● additive ON delay Yes
● passing break contact Yes
● passing break contact/instantaneous No
● OFF delay Yes
● OFF delay/instantaneous No
● pulse delayed Yes
● pulse delayed/instantaneous No
● pulse-shaping Yes
● pulse-shaping/instantaneous No
● additive ON delay/instantaneous No
● ON-delay/OFF-delay/instantaneous No
● passing make contact Yes
● passing make contact/instantaneous contact No
Switching function of interval relay with control signal
● retrotriggerable with deactivated control No
signal/instantaneous contact
● retrotriggerable with activated control signal Yes
● retrotriggerable with activated control No
signal/instantaneous contact
● retriggerable with deactivated control signal Yes
Design of the control terminal non-floating Yes
3RP2505-1AW30 Subject to change without notice
Page 3/8 11/27/2019 © Copyright Siemens
Short-circuit protection
Design of the fuse link
● for short-circuit protection of the auxiliary switch fuse gL/gG: 4 A
required
Auxiliary circuit
Material of switching contacts AgSnO2
Number of NC contacts
● delayed switching 0
Number of NO contacts
● delayed switching 0
Number of CO contacts
● delayed switching 1
Operating current of auxiliary contacts at AC-15
● at 24 V 3A
● at 250 V 3A
Operating current of auxiliary contacts at DC-13
● at 24 V 1A
● at 125 V 0.2 A
● at 250 V 0.1 A
Operating frequency with 3RT2 contactor maximum 5 000 1/h
Contact reliability of auxiliary contacts one incorrect switching operation of 100 million switching
operations (17 V, 5 mA)
Contact rating of auxiliary contacts according to UL R300 / B300
Influence of the surrounding temperature 1% in the whole temperature range to the set runtime
Power supply influence 1% in the whole voltage range to the set runtime
Switching capacity current with inductive load 0.01 ... 3 A
Inputs/ Outputs
Product function
● at the relay outputs Switchover delayed/without No
delay
● non-volatile No
Electromagnetic compatibility
EMI immunity
● acc. to IEC 61812-1 EN 61000-6-2
Conducted interference
● due to burst acc. to IEC 61000-4-4 2 kV network connection / 1 kV control connection
● due to conductor-earth surge acc. to IEC 2 kV
61000-4-5
● due to conductor-conductor surge acc. to IEC 1 kV
61000-4-5
Field-bound parasitic coupling acc. to IEC 61000-4-3 10 V/m
Electrostatic discharge acc. to IEC 61000-4-2 4 kV contact discharge / 8 kV air discharge
3RP2505-1AW30 Subject to change without notice
Page 4/8 11/27/2019 © Copyright Siemens
Safety related data
Protection against electrical shock finger-safe
Type of insulation Basic insulation
Category acc. to EN 954-1 none
Connections/ Terminals
Product function
● removable terminal for auxiliary and control Yes
circuit
Type of electrical connection
● for auxiliary and control current circuit screw-type terminals
Type of connectable conductor cross-sections
● solid 1x (0.5 ... 4.0 mm²), 2x (0.5 ... 2.5 mm²)
● finely stranded with core end processing 1x (0.5 ... 4 mm²), 2x (0.5 ... 1.5 mm²)
● at AWG conductors solid 1x (20 ... 12), 2x (20 ... 14)
● at AWG conductors stranded 1x (20 ... 12), 2x (20 ... 14)
Connectable conductor cross-section
● solid 0.5 ... 4 mm²
● finely stranded with core end processing 0.5 ... 4 mm²
AWG number as coded connectable conductor cross
section
● solid 20 ... 12
● stranded 20 ... 14
Tightening torque 0.6 ... 0.8 N·m
Design of the thread of the connection screw M3
Installation/ mounting/ dimensions
Mounting position any
Mounting type screw and snap-on mounting onto 35 mm standard mounting rail
Height 100 mm
Width 17.5 mm
Depth 90 mm
Required spacing
● with side-by-side mounting
— forwards 0 mm
— Backwards 0 mm
— upwards 0 mm
— downwards 0 mm
— at the side 0 mm
● for grounded parts
— forwards 0 mm
— Backwards 0 mm
— upwards 0 mm
— at the side 0 mm
3RP2505-1AW30 Subject to change without notice
Page 5/8 11/27/2019 © Copyright Siemens
— downwards 0 mm
● for live parts
— forwards 0 mm
— Backwards 0 mm
— upwards 0 mm
— downwards 0 mm
— at the side 0 mm
Ambient conditions
Installation altitude at height above sea level
● maximum 2 000 m
Relative humidity
● during operation 10 ... 95 %
Certificates/ approvals
General Product Approval EMC Declaration of
Conformity
Declaration of Test Certific- Marine / Shipping
Conformity ates
Miscellaneous Type Test Certific-
ates/Test Report
Marine / Ship- other
ping
Confirmation
Further information
Information- and Downloadcenter (Catalogs, Brochures,…)
www.siemens.com/sirius/catalogs
Industry Mall (Online ordering system)
https://mall.industry.siemens.com/mall/en/en/Catalog/product?mlfb=3RP2505-1AW30
Cax online generator
http://support.automation.siemens.com/WW/CAXorder/default.aspx?lang=en&mlfb=3RP2505-1AW30
Service&Support (Manuals, Certificates, Characteristics, FAQs,...)
https://support.industry.siemens.com/cs/ww/en/ps/3RP2505-1AW30
3RP2505-1AW30 Subject to change without notice
Page 6/8 11/27/2019 © Copyright Siemens
Image database (product images, 2D dimension drawings, 3D models, device circuit diagrams, EPLAN macros, ...)
http://www.automation.siemens.com/bilddb/cax_de.aspx?mlfb=3RP2505-1AW30&lang=en
91.6
17.5 86.5
S IRIU S
3 RP2 5 0 5 - 1 AW3 0
A2 ( - ) A2 ( - )
1 2 ...2 4 0 V
AC/ DC
A1 ( + ) B1 ( + )
3 RP2 5 0 5 - 1 AW3 0 50
100
1 6 NC 1 8 NO
15C
3 RP2 5 0 5 - 1 AW3 0
3RP2505-1AW30 Subject to change without notice
Page 7/8 11/27/2019 © Copyright Siemens
15 C
A1
B1
3 4 7
-K
1 2 5 6
18 NO
16 NC
A2
A2
last modified: 11/27/2019
3RP2505-1AW30 Subject to change without notice
Page 8/8 11/27/2019 © Copyright Siemens
