Scribd
Upload
50 views

Edfa Network Management S ND Debugging Tutorial

This document provides instructions for debugging and managing EDFA network equipment using serial port connections, web interfaces, and management platforms. It discusses: 1. Debugging the serial port of an EDFA unit and using software to view and modify unit name and model. 2. Network management of high-power optical fiber amplifiers by connecting via Ethernet and accessing the web interface to view status, settings, and alarms. 3. Using an HFC network management platform to add EDFA units, view status including power and temperature, and adjust output light power levels or enable/disable remotely.

Uploaded by

Juan Felipe Martínez Herrera
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
50 views

Edfa Network Management S ND Debugging Tutorial

This document provides instructions for debugging and managing EDFA network equipment using serial port connections, web interfaces, and management platforms. It discusses: 1. Debugging the serial port of an EDFA unit and using software to view and modify unit name and model. 2. Network management of high-power optical fiber amplifiers by connecting via Ethernet and accessing the web interface to view status, settings, and alarms. 3. Using an HFC network management platform to add EDFA units, view status including power and temperature, and adjust output light power levels or enable/disable remotely.

Uploaded by

Juan Felipe Martínez Herrera
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 24

EDFA network

management software
and debugging tutorial
I. Debugging Network HFC network
1 of EDFA serial 2 management 3 management
port. debugging of platform.
high-power
optical fiber
amplifier.
01 Debugging of EDFA serial port
1.As shown in the figure, use rs232-9 pin serial port
line to connect EDFA with the computer.

www.shunv-catv.com 3
2.As shown in the figure, open EDFA, open computer client SSCOM software,
select ComNum, click OpenCom and select Baud rate:19200.
3.Enter in the space
4.The company name and product model can be modified
according to the following instructions:
In the following options, the parameters that customers are
allowed to modify are:
1> Name | N:(27character) | Set Factory name |
2> Model | T:(27character) | Set model |
Please note: other parameters are not allowed to change,
otherwise the consequence is at your own risk.
02 Network management debugging
of high-power optical fiber amplifier
1. Connect the RJ45 network pipeline to the computer,
as shown in the figure
2.Set the IP address of the computer: 192.168.0.2
Subnet mask: 255.255.255.0
3. Use Internet explorer to log in EDFA network management:

1> open Internet explorer and type 192.168.0.101


2> enter user name: admin
3> in the device working status bar:
A. The working voltage output by the power supply of the
equipment can be observed, so as to know whether the power
supply works normally.
B. It can be observed whether the input and output optical power
of EDFA is normal.
C. The working current of the pump can be observed to know
whether the working current of the pump is normal.
D. Machine model, machine serial number and machine
operating temperature can be observed.
4> in the device Settings bar, has two functions:
A. Adjust the optical power output of EDFA, input the output
value to be changed in the setting output, and click the
submit button.
B. Remotely open or close the EDFA output optical power,
select ON or OFF, and click the submit button.
5> alarm status and alarm setting status:
Please check the alarm setting state. The setting range may
not be enough in the alarm setting state. You can change the
alarm setting state to adjust the alarm state.
6> network Settings: you can change the EDFA IP address,
gateway, subnet mask, etc
7> change login name and password:
If you forget your login and password, use super login and password:
Super login user name: super
Super login password: super
8> restore network administrator Settings and restart
network administrator:

Warning!Disable all Settings on this page. The Settings on this


page are those used by the manufacturer for debugging.
03 HFC network management platform
1. Double-click Manager3 to open the integrated large-scale
network management platform, and click OK to log in.
2. Right-click and select New-- IP Transponder,AddNew Transponder,
Enter EDFA's default IP address and default Communuty. Click OK
3. Double-click hf-oa to open the network management of EDFA
1.> can observe the working voltage output by the power supply of the equipment, so as to know whether the power
supply works normally. 2. > can observe whether the input and output light power of EDFA is normal.
3. > can observe the working current of the pump and know whether the working current of the pump is normal.
4.> can observe machine model, machine serial number, machine operating temperature and so on.
4.EDFA output light power adjustment and remote open and
close function of EDFA:

1>Double-click "--OnOFFControl" to enter the light power output of EDFA, input


the output value to be changed in the setting output, and click "submit".
2>remote open or close EDFA output light power, select ON or OFF, click the
submit button.
Thanks for your support

You might also like