Cosmo

Light-Up Folding Scooter.

A guide for your ride.

Model: JCOSMO-BLK
Remember to be
safe and,
most importantly,
have fun!
What’s in the Box
1. Handlebar 6. Knob
2. Stem Clamp 7. Deck
3. LED Light-Up Stem 8. Rear Foot Brake
4. Folding Lever 9. Rear Wheel
5. Front Wheel

5 9

Specs & Features

• Weight Limit: 132 lb
• Product Weight: 6 lb
• Recommended Age: 5+
• Wheel Size: 4” (100mm)
• Unfolded Dims: 24.5” × 10” × 33.5”
• Folded Dims: 24.5” × 10.5” × 7.75”
• Deck Size: 17.5” × 3.5”
• Height Adjustable Handlebar: 29”-33.5”
• 3 AA Batteries Required (Not Included)
• LED Light-Up Wheels, Deck & Stem
• Easy Folding Technology
1. Get Started

1.1 Assembly

Tighten using
Bolt and Nut

Quick Note: Place the Nut on the right side when facing the front of the Cosmo.

1.2 Unfolding / Folding the Cosmo

Loosen Knob Open the Locking Lever

Pull up on the Folding Lever

• Pull Stem up. Once you hear it click, it’s fully unfolded.
• Close the Locking Lever and tighten the Knob.
• Reverse these steps to fold the Cosmo.

*Adults must assist children in the initial assembly and adjustment procedures to fold/
unfold product as well as adjusting handlebar to height.
1.3 Adjusting the Handlebar
Open the Stem Clamp Lift (or lower) Handlebar

Press in

When you hear it click, tighten & close Stem Clamp to lock. Make sure the
Handlebar is secure.

CAUTION: The stem pin will not keep the stem secure, please make sure
the Stem Clamp is tightened and closed prior to riding.

1.4 Using the Brake

Press down to come to a complete stop.

1.5 Changing the Batteries

Battery Door

Power Button

BATTERY DOOR
1. Open the Battery Door with a screwdriver.
2. Place 3 AA batteries inside.
3. Close the Battery Door with that same screwdriver.
4. You’re all set!
2. Make Moves

2.1 Riding the Cosmo

• Place one foot in front.
• Place the other foot in back, at a 70-90° angle.
• Turn the handlebar to the left or right to make turns.

2.2 LED Lights

LED LIGHT FUNCTIONS

1. Press the Power Button to turn on the LED Lights.
2. You can cycle through 7 different light functions by pressing on the
Power Button (the 8th time will turn off the lights).
3. To skip the cycle and turn off the lights hold the Power Button
for 3 seconds.

Quick Note: Remember to turn off the lights when you’re done riding the
Cosmo to save battery life!

*Please Note: Images may not reflect exact appearance of actual product.
 Care & Maintenance
CLEANING THE COSMO
To clean the Cosmo, carefully wipe with a damp cloth, then dry with a dry
cloth. Do not use water to clean the Cosmo, this may damage the frame.
STORAGE
• Store the Cosmo indoors in a dry place.
• Cover the Cosmo to protect against dust.
A FEW MUST-DO’S
• Keep away from fire and excessive heat.
• Avoid intense physical impact and / or severe vibration.
• Please ride the Cosmo on a smooth, flat surface.
• Protect from water or moisture.
• Contact Jetson Customer Care if there are any issues with the Cosmo.

MODIFICATIONS
Do not attempt to disassemble, modify, repair, or replace the product or
any components of the unit without instruction from Jetson Customer Care.
This will void any warranty, and can lead to malfunctions which may
cause injury.

ADDITIONAL OPERATION CAUTIONS

Do not lift the product off the ground while it is on and the wheels are in
motion. This can result in freely spinning wheels, which may cause injury
to yourself or others nearby. Do not jump on or off the product, and do not
jump while using it. Always keep your feet firmly planted on the mat sensors
while in operation. Always check the battery charge before using.

DISPOSAL OF USED BATTERY

Battery may contain hazardous substances which could endanger the environment
and human health. This symbol marked on the battery and/ or packaging indicates
that used battery shall not be treated as municipal waste. Batteries should be disposed
of at an appropriate collection point for recycling. By ensuring the used batteries are
disposed of correctly, you will help preventing potential negative consequences for the
environment and human health. The recycling of materials will help to conserve natural
resources.
For more information about recycling of used batteries, please contact your local
municipality waste disposal service.
Safety Warnings
• Before use, please read the user manual and safety warnings carefully, and make sure you understand
and accept all the safety instructions. The user will be responsible for any loss or damage caused by
improper use.
• Before each cycle of operation, the operator shall perform the preoperation checks specified by the
manufacturer: That all guards and pads originally supplied by the manufacturer are in proper place and
in serviceable condition; That the braking system is functioning properly; That any and all axle guards,
chain guards, or other covers or guards supplied by the manufacturer are in place and in serviceable
condition; That tires are in good condition, inflated properly, and have sufficient tread remaining; The
area that the product is to be operated should be safe and suitable for safe operation.
• Components shall be maintained and repaired in accordance with the manufacturer’s specifications
and using only the manufacturer’s authorized replacement parts with installation performed by dealers
or other skilled persons.
• Warning against recharging non-rechargeable batteries.
• Don’t allow hands, feet, hair, body parts, clothing, or similar articles to come in contact with moving
parts, wheels, or drive train, while the motor is running.
• This product should not be used by children or persons with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have been given supervision or
instruction (IEC 60335-1/A2:2006).
• Unsupervised children should not play with the product (IEC 60335-1/A2:2006).
• Adult supervision is required.
• The rider should not exceed 132lb.
• Units shall not be operated to perform racing, stunt riding, or other maneuvers, which may cause loss
of control, or may cause uncontrolled operator/passenger actions or reactions.
• Never use near motor vehicles.
• Avoid sharp bumps, drainage grates, and sudden surface changes. Scooter may suddenly stop.
• Avoid streets and surfaces with water, sand, gravel, dirt, leaves, and other debris. Wet weather impairs
traction, braking, and visibility.
• Avoid riding around flammable gas, steam, liquid, or dust that could cause fire.
• Operators shall adhere to all of the manufacturer’s recommendations and
instructions, as well as comply with all laws and ordinances: Units without headlights shall be operated
only with adequate daylight conditions of visibility, and; Owners shall be encouraged to highlight (for
conspicuity) using lighting, reflectors, and for low-riding units, signal flags on flexible poles.
• Persons with the following conditions shall be cautioned not to operate: Those with heart conditions;
Pregnant women; Persons with head, back, or neck ailments, or prior surgeries to those areas of the
body; and persons with any mental or physical conditions that may make them susceptible to injury or
impair their physical dexterity or mental capabilities to recognize, understand, and perform all of the
safety instructions and to be able to assume the hazards inherent in unit use.
• Do not ride at night.
• Do not ride after drinking or taking prescription medication.
• Do not carry items when riding.
• Never operate the product barefooted.
• Always wear shoes and keep shoelaces tied.
• Make sure your feet are always placed securely on the deck.
• Operators always shall use appropriate protective clothing, including but not
limited to a helmet, with appropriate certification, and any other equipment
recommended by the manufacturer: Always wear protective equipment such as helmet, knee pads, and
elbow pads.
• Always give way to pedestrians.
• Be alert to things in front and far away from you.
• Do not allow distractions when riding, such as answering the phone or engaging in any
other activities.
• The product cannot be ridden by more than one person.
• When you ride the product along with other riders, always keep a safe distance to avoid a collision.
• When turning, be sure to maintain your balance.
• Riding with improperly adjusted brakes is dangerous and can result in serious
injury or death.
• The brake may become hot while operating, do not touch the brake with your bare skin.
• Applying brakes too hard or too suddenly can lock up a wheel, which could
cause you to lose control and fall. Sudden or excessive application of the brake
may result in injury or death.
• If the brake loosens, please adjust with the hexagon wrench, or please contact Jetson Customer Care.
• Replace worn or broken parts immediately.
• Check whether all safety labels are in place and understood before riding.
• The owner shall allow the use and operation of the unit after a demonstration
that such operators can understand and operate all components of the unit
before use.
• Do not ride without proper training. Do not ride at high speeds, on uneven
terrain, or on slopes. Do not perform stunts or turn abruptly.
• Recommended for indoor use.
• Prolonged exposure to UV rays, rain and the elements may damage the enclosure materials, store
indoors when not in use.

California Proposition 65
WARNING:
This product can expose you to a chemical such as Chromium that is known to
the state of California to cause cancer or birth defects or other reproductive harm. For more
information go to www.p65warnings.ca.gov/product

NOTICE OF COMPLIANCE
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device
may not cause harmful interference, and (2) this device must accept any interference received, including interference
that may cause undesired operation.
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/ TV technician for help.
Shielded cables must be used with this unit to ensure compliance with the Class B FCC limits.
Enjoying the ride?
Leave a review on ridejetson.com/reviews or share your photos with us online
using the #RideJetson hashtag!

Questions? Let us know.

support.ridejetson.com

Hours of Operation: 7 Days a Week, 10am-6pm

www.ridejetson.com

Follow us @ridejetson
#MakeMoves

Imported by Jetson Electric Bikes LLC.

86 34th Street 4th Floor, Brooklyn NY 11232

Date Code: 02/2021

Made in China