0% found this document useful (0 votes)

25 views72 pages

PG Substructure

The document is an analysis report from STAAD.Pro software for the structural design of a two story residential house. It includes details of the structural model such as the number of joints and members. It then provides the design results for Beam 1, including reinforcement requirements, shear design, and a diagram of the beam reinforcement. Similar information is then presented for the design of Beam 2.

Uploaded by

Martin Gragasin

We take content rights seriously. If you suspect this is your content, claim it here.

Available Formats

Download as PDF, TXT or read online on Scribd

0% found this document useful (0 votes)

25 views72 pages

PG Substructure

Uploaded by

Martin Gragasin

We take content rights seriously. If you suspect this is your content, claim it here.

Available Formats

Download as PDF, TXT or read online on Scribd

You are on page 1/ 72

Saturday, February 03, 2024, 04:37 PM

PAGE NO. 1

****************************************************
* *
* STAAD.Pro V8i SELECTseries6 *
* Version 20.07.11.33 *
* Proprietary Program of *
* Bentley Systems, Inc. *
* Date= FEB 3, 2024 *
* Time= 16:36:24 *
* *
* USER ID: *
****************************************************

1. STAAD SPACE
INPUT FILE: C:\Users\fierr\Desktop\Fierre\PROJECTS\PABLO GUTIERREZ\STAAD FILES\SUBSTRUCTURE\PG-SUBSTRU.. .STD
2. START JOB INFORMATION
3. ENGINEER DATE 29-JAN-24
4. JOB NAME TWO (2) STORY RESIDENTIAL HOUSE WITH ROOF DECK
5. JOB CLIENT PABLO GUTIERREZ
6. JOB NO 1
7. ENGINEER NAME MFG
8. CHECKER NAME GAB
9. END JOB INFORMATION
10. SET ECHO OFF
**NOTE** about Floor/OneWay Loads/Weights.
Please note that depending on the shape of the floor you may
have to break up the FLOOR/ONEWAY LOAD into multiple commands.
For details please refer to Technical Reference Manual
Section 5.32.4.2 Note d and/or "5.32.4.3 Note f.

P R O B L E M S T A T I S T I C S
-----------------------------------

NUMBER OF JOINTS 36 NUMBER OF MEMBERS 44

NUMBER OF PLATES 0 NUMBER OF SOLIDS 0
NUMBER OF SURFACES 0 NUMBER OF SUPPORTS 18

SOLVER USED IS THE OUT-OF-CORE BASIC SOLVER

C:\Users\fierr\Desktop\Fierre\PROJECTS\PABLO GUTIERREZ\STAAD FILES\SUBSTRUCTURE\PG-SUBSTRUCTURE.anl Page 1 of 72

Saturday, February 03, 2024, 04:37 PM
STAAD SPACE -- PAGE NO. 2

ORIGINAL/FINAL BAND-WIDTH= 26/ 7/ 30 DOF

TOTAL PRIMARY LOAD CASES = 14, TOTAL DEGREES OF FREEDOM = 108
TOTAL LOAD COMBINATION CASES = 107 SO FAR.
SIZE OF STIFFNESS MATRIX = 4 DOUBLE KILO-WORDS
REQRD/AVAIL. DISK SPACE = 12.1/ 134913.3 MB

C:\Users\fierr\Desktop\Fierre\PROJECTS\PABLO GUTIERREZ\STAAD FILES\SUBSTRUCTURE\PG-SUBSTRUCTURE.anl Page 2 of 72

Saturday, February 03, 2024, 04:37 PM
STAAD SPACE -- PAGE NO. 3

ACI 318-11 BEAM NO. 1 DESIGN RESULTS

=============================================

LEN - 3100. MM FY - 420. FC - 21. MPA, SIZE - 250. X 400. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 48. 2 - 16MM 0. 3100. YES YES

|----------------------------------------------------------------|
| CRITICAL POS MOMENT= 48.43 KN-MET AT 0.MM, LOAD 39|
| REQD STEEL= 384.MM2, RHO=0.0044, RHOMX=0.0159 RHOMN=0.0033 |
| MAX/MIN/ACTUAL BAR SPACING= 275./ 41./ 138. MMS |
| REQD. DEVELOPMENT LENGTH = 530. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 31521.3 cm^4

2 352. 3 - 16MM 0. 1981. YES NO

|----------------------------------------------------------------|
| CRITICAL NEG MOMENT= 59.68 KN-MET AT 0.MM, LOAD 29|
| REQD STEEL= 479.MM2, RHO=0.0054, RHOMX=0.0159 RHOMN=0.0033 |
| MAX/MIN/ACTUAL BAR SPACING= 275./ 41./ 69. MMS |
| REQD. DEVELOPMENT LENGTH = 615. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 43579.4 cm^4

3 352. 3 - 16MM 1249. 3100. NO YES

|----------------------------------------------------------------|
| CRITICAL NEG MOMENT= 54.13 KN-MET AT 3100.MM, LOAD 27|
| REQD STEEL= 432.MM2, RHO=0.0049, RHOMX=0.0159 RHOMN=0.0033 |
| MAX/MIN/ACTUAL BAR SPACING= 275./ 41./ 69. MMS |
| REQD. DEVELOPMENT LENGTH = 615. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 43579.4 cm^4

REQUIRED REINF. STEEL SUMMARY :

-------------------------------
SECTION REINF STEEL(+VE/-VE) MOMENTS(+VE/-VE) LOAD(+VE/-VE)
( MM ) (SQ. MM ) (KNS-MET )

0. 391./ 489. 48./ 60. 39/ 29

258. 365./ 367. 45./ 46. 39/ 29
517. 344./ 270. 43./ 34. 27/ 41
775. 315./ 183. 39./ 23. 27/ 41
1033. 275./ 106. 35./ 14. 27/ 41
1292. 223./ 38. 28./ 5. 27/ 41
1550. 160./ 0. 20./ 0. 27/ 0
1808. 105./ 0. 14./ 0. 16/ 0

C:\Users\fierr\Desktop\Fierre\PROJECTS\PABLO GUTIERREZ\STAAD FILES\SUBSTRUCTURE\PG-SUBSTRUCTURE.anl Page 3 of 72

Saturday, February 03, 2024, 04:37 PM
STAAD SPACE -- PAGE NO. 4

2067. 136./ 18. 17./ 2. 29/ 39

2325. 163./ 101. 21./ 13. 29/ 39
2583. 183./ 196. 23./ 25. 41/ 27
2842. 209./ 312. 26./ 39. 41/ 27
3100. 228./ 441. 29./ 54. 41/ 27

B E A M N O. 1 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 35.09 KNS Vc= 68.38 KNS Vs= 0.00 KNS
Tu= 0.29 KN-MET Tc= 2.2 KN-MET Ts= 0.0 KN-MET LOAD 23
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 10 MM 2-LEGGED STIRRUPS AT 176. MM C/C FOR 1200. MM

AT END SUPPORT - Vu= 31.11 KNS Vc= 72.05 KNS Vs= 0.00 KNS
Tu= 0.28 KN-MET Tc= 2.3 KN-MET Ts= 0.0 KN-MET LOAD 18
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 10 MM 2-LEGGED STIRRUPS AT 176. MM C/C FOR 1200. MM

_1001J__ 3100X 250X 400_1004J

| |
||=========================================================================||
| 3No16|H 352. 0.TO 1981 | 3No16 H 352.1249.TO 3100 | | | | |
| 8*10c/c176 | | | | | | | | | 8*10c/c176| |
| 2No16|H 48. 0.TO 3100 | | | | | | | | | | |
||=========================================================================||
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________ _________
| | | | | | | | | | | |
| ooo | | ooo | | ooo | | ooo | | ooo | | ooo |
| 3#16 | | 3#16 | | 3#16 | | 3#16 | | 3#16 | | 3#16 |
| | | | | | | | | | | |
| 2#16 | | 2#16 | | 2#16 | | 2#16 | | 2#16 | | 2#16 |
| oo | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_________| |_________| |_________| |_________| |_________| |_________|

C:\Users\fierr\Desktop\Fierre\PROJECTS\PABLO GUTIERREZ\STAAD FILES\SUBSTRUCTURE\PG-SUBSTRUCTURE.anl Page 4 of 72

Saturday, February 03, 2024, 04:37 PM
STAAD SPACE -- PAGE NO. 5

ACI 318-11 BEAM NO. 2 DESIGN RESULTS

=============================================

LEN - 2000. MM FY - 420. FC - 21. MPA, SIZE - 250. X 400. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 48. 2 - 16MM 0. 1216. YES NO

|----------------------------------------------------------------|
| CRITICAL POS MOMENT= 37.14 KN-MET AT 0.MM, LOAD 39|
| REQD STEEL= 290.MM2, RHO=0.0033, RHOMX=0.0159 RHOMN=0.0033 |
| MAX/MIN/ACTUAL BAR SPACING= 275./ 41./ 138. MMS |
| REQD. DEVELOPMENT LENGTH = 530. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 31521.3 cm^4

2 48. 2 - 16MM 703. 2000. NO YES

|----------------------------------------------------------------|
| CRITICAL POS MOMENT= 31.81 KN-MET AT 2000.MM, LOAD 41|
| REQD STEEL= 289.MM2, RHO=0.0033, RHOMX=0.0159 RHOMN=0.0033 |
| MAX/MIN/ACTUAL BAR SPACING= 275./ 41./ 138. MMS |
| REQD. DEVELOPMENT LENGTH = 530. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 31521.3 cm^4

3 352. 3 - 16MM 0. 2000. YES YES

|----------------------------------------------------------------|
| CRITICAL NEG MOMENT= 69.65 KN-MET AT 2000.MM, LOAD 27|
| REQD STEEL= 566.MM2, RHO=0.0064, RHOMX=0.0159 RHOMN=0.0033 |
| MAX/MIN/ACTUAL BAR SPACING= 275./ 41./ 69. MMS |
| REQD. DEVELOPMENT LENGTH = 615. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 43579.4 cm^4

REQUIRED REINF. STEEL SUMMARY :

-------------------------------
SECTION REINF STEEL(+VE/-VE) MOMENTS(+VE/-VE) LOAD(+VE/-VE)
( MM ) (SQ. MM ) (KNS-MET )

0. 296./ 384. 37./ 48. 39/ 29

167. 243./ 310. 31./ 39. 39/ 29
333. 189./ 241. 24./ 30. 39/ 29
500. 133./ 177. 17./ 23. 39/ 29
667. 74./ 118. 10./ 15. 39/ 29
833. 14./ 65. 2./ 8. 39/ 29
1000. 0./ 61. 0./ 8. 0/ 27
1167. 44./ 133. 6./ 17. 41/ 27
1333. 89./ 211. 12./ 27. 41/ 27
1500. 133./ 294. 17./ 37. 41/ 27
1667. 174./ 383. 22./ 47. 41/ 27
1833. 214./ 477. 27./ 58. 41/ 27
2000. 252./ 579. 32./ 70. 41/ 27

B E A M N O. 2 D E S I G N R E S U L T S - SHEAR

C:\Users\fierr\Desktop\Fierre\PROJECTS\PABLO GUTIERREZ\STAAD FILES\SUBSTRUCTURE\PG-SUBSTRUCTURE.anl Page 5 of 72

Saturday, February 03, 2024, 04:37 PM
STAAD SPACE -- PAGE NO. 6

AT START SUPPORT - Vu= 38.13 KNS Vc= 66.90 KNS Vs= 0.00 KNS
Tu= 0.59 KN-MET Tc= 2.2 KN-MET Ts= 0.0 KN-MET LOAD 26
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 10 MM 2-LEGGED STIRRUPS AT 176. MM C/C FOR 650. MM

AT END SUPPORT - Vu= 28.50 KNS Vc= 66.09 KNS Vs= 0.00 KNS
Tu= 0.41 KN-MET Tc= 2.2 KN-MET Ts= 0.0 KN-MET LOAD 18
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 10 MM 2-LEGGED STIRRUPS AT 176. MM C/C FOR 650. MM

_1004J__ 2000X 250X 400_1007J

| |
||=========================================================================||
| 3No16 H|352. |0.TO 2000 | | | | | | |
| 5*10c/c176 | | | | | | 5*10c/c176 | |
| 2No16 H| 48. |0.TO 1216 2No16 H 48. 703.TO|2000 | | | | |
||=========================================================================||
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________ _________
| | | | | | | | | | | |
| ooo | | ooo | | ooo | | ooo | | ooo | | ooo |
| 3#16 | | 3#16 | | 3#16 | | 3#16 | | 3#16 | | 3#16 |
| | | | | | | | | | | |
| 2#16 | | 2#16 | | 2#16 | | 2#16 | | 2#16 | | 2#16 |
| oo | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_________| |_________| |_________| |_________| |_________| |_________|

ACI 318-11 BEAM NO. 3 DESIGN RESULTS

=============================================

LEN - 4175. MM FY - 420. FC - 21. MPA, SIZE - 250. X 400. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 48. 2 - 16MM 0. 4175. YES YES

|----------------------------------------------------------------|
| CRITICAL POS MOMENT= 32.40 KN-MET AT 2783.MM, LOAD 29|
| REQD STEEL= 289.MM2, RHO=0.0033, RHOMX=0.0159 RHOMN=0.0033 |
| MAX/MIN/ACTUAL BAR SPACING= 275./ 41./ 138. MMS |
| REQD. DEVELOPMENT LENGTH = 530. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 31521.3 cm^4

C:\Users\fierr\Desktop\Fierre\PROJECTS\PABLO GUTIERREZ\STAAD FILES\SUBSTRUCTURE\PG-SUBSTRUCTURE.anl Page 6 of 72

Saturday, February 03, 2024, 04:37 PM
STAAD SPACE -- PAGE NO. 7

2 352. 3 - 16MM 0. 1733. YES NO

|----------------------------------------------------------------|
| CRITICAL NEG MOMENT= 59.95 KN-MET AT 0.MM, LOAD 29|
| REQD STEEL= 482.MM2, RHO=0.0055, RHOMX=0.0159 RHOMN=0.0033 |
| MAX/MIN/ACTUAL BAR SPACING= 275./ 41./ 69. MMS |
| REQD. DEVELOPMENT LENGTH = 615. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 43579.4 cm^4

3 352. 2 - 16MM 2268. 4175. NO YES

|----------------------------------------------------------------|
| CRITICAL NEG MOMENT= 44.31 KN-MET AT 4175.MM, LOAD 27|
| REQD STEEL= 349.MM2, RHO=0.0040, RHOMX=0.0159 RHOMN=0.0033 |
| MAX/MIN/ACTUAL BAR SPACING= 275./ 41./ 138. MMS |
| REQD. DEVELOPMENT LENGTH = 530. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 31521.3 cm^4

REQUIRED REINF. STEEL SUMMARY :

-------------------------------
SECTION REINF STEEL(+VE/-VE) MOMENTS(+VE/-VE) LOAD(+VE/-VE)
( MM ) (SQ. MM ) (KNS-MET )

0. 51./ 492. 7./ 60. 39/ 29

348. 96./ 319. 12./ 40. 39/ 29
696. 131./ 170. 17./ 22. 39/ 29
1044. 172./ 63. 22./ 8. 27/ 41
1392. 201./ 0. 26./ 0. 27/ 0
1740. 207./ 0. 26./ 0. 27/ 0
2088. 228./ 0. 29./ 0. 16/ 0
2435. 242./ 0. 31./ 0. 29/ 0
2783. 257./ 0. 32./ 0. 29/ 0
3131. 251./ 35. 32./ 5. 29/ 39
3479. 226./ 117. 29./ 15. 29/ 39
3827. 191./ 218. 24./ 28. 41/ 27
4175. 165./ 356. 21./ 44. 41/ 27

B E A M N O. 3 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 44.54 KNS Vc= 69.01 KNS Vs= 0.00 KNS
Tu= 0.80 KN-MET Tc= 2.3 KN-MET Ts= 0.0 KN-MET LOAD 15
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 10 MM 2-LEGGED STIRRUPS AT 176. MM C/C FOR 1738. MM

C:\Users\fierr\Desktop\Fierre\PROJECTS\PABLO GUTIERREZ\STAAD FILES\SUBSTRUCTURE\PG-SUBSTRUCTURE.anl Page 7 of 72

Saturday, February 03, 2024, 04:37 PM
STAAD SPACE -- PAGE NO. 8

AT END SUPPORT - Vu= 32.60 KNS Vc= 74.26 KNS Vs= 0.00 KNS
Tu= 0.64 KN-MET Tc= 2.3 KN-MET Ts= 0.0 KN-MET LOAD 18
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 10 MM 2-LEGGED STIRRUPS AT 176. MM C/C FOR 1738. MM

_1007J__ 4175X 250X 400_1012J

| |
||============================== ==================================||
| 3No16 H 352.| 0.TO 1733| | 2No16 H 352.2268.TO 4175| | | |
| 11*10c/c176 | | | | | | | | | | 11*10c/c176 | |
| 2No16 H |48.| 0.TO 4175| | | | | | | | | | | |
||=========================================================================||
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________ _________
| | | | | | | | | | | |
| ooo | | ooo | | ooo | | oo | | oo | | oo |
| 3#16 | | 3#16 | | 3#16 | | 2#16 | | 2#16 | | 2#16 |
| | | | | | | | | | | |
| 2#16 | | 2#16 | | 2#16 | | 2#16 | | 2#16 | | 2#16 |
| oo | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_________| |_________| |_________| |_________| |_________| |_________|

ACI 318-11 BEAM NO. 8 DESIGN RESULTS

=============================================

LEN - 3250. MM FY - 420. FC - 21. MPA, SIZE - 250. X 400. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 48. 2 - 16MM 0. 3250. YES YES

|----------------------------------------------------------------|
| CRITICAL POS MOMENT= 29.39 KN-MET AT 1083.MM, LOAD 27|
| REQD STEEL= 289.MM2, RHO=0.0033, RHOMX=0.0159 RHOMN=0.0033 |
| MAX/MIN/ACTUAL BAR SPACING= 275./ 41./ 138. MMS |
| REQD. DEVELOPMENT LENGTH = 530. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 31521.3 cm^4

2 352. 2 - 16MM 0. 1501. YES NO

|----------------------------------------------------------------|
| CRITICAL NEG MOMENT= 33.54 KN-MET AT 0.MM, LOAD 29|
| REQD STEEL= 289.MM2, RHO=0.0033, RHOMX=0.0159 RHOMN=0.0033 |
| MAX/MIN/ACTUAL BAR SPACING= 275./ 41./ 138. MMS |
| REQD. DEVELOPMENT LENGTH = 530. MMS |
|----------------------------------------------------------------|

C:\Users\fierr\Desktop\Fierre\PROJECTS\PABLO GUTIERREZ\STAAD FILES\SUBSTRUCTURE\PG-SUBSTRUCTURE.anl Page 8 of 72

Saturday, February 03, 2024, 04:37 PM
STAAD SPACE -- PAGE NO. 9

Cracked Moment of Inertia Iz at above location = 31521.3 cm^4

3 352. 2 - 16MM 1613. 3250. NO YES

|----------------------------------------------------------------|
| CRITICAL NEG MOMENT= 35.00 KN-MET AT 3250.MM, LOAD 27|
| REQD STEEL= 289.MM2, RHO=0.0033, RHOMX=0.0159 RHOMN=0.0033 |
| MAX/MIN/ACTUAL BAR SPACING= 275./ 41./ 138. MMS |
| REQD. DEVELOPMENT LENGTH = 530. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 31521.3 cm^4

REQUIRED REINF. STEEL SUMMARY :

-------------------------------
SECTION REINF STEEL(+VE/-VE) MOMENTS(+VE/-VE) LOAD(+VE/-VE)
( MM ) (SQ. MM ) (KNS-MET )

0. 167./ 266. 21./ 34. 39/ 29

271. 184./ 172. 23./ 22. 27/ 41
542. 212./ 105. 27./ 14. 27/ 41
812. 229./ 47. 29./ 6. 27/ 41
1083. 232./ 0. 29./ 0. 27/ 0
1354. 220./ 0. 28./ 0. 27/ 0
1625. 190./ 0. 24./ 0. 27/ 0
1896. 165./ 0. 21./ 0. 16/ 0
2167. 124./ 0. 16./ 0. 16/ 0
2437. 105./ 10. 14./ 1. 29/ 39
2708. 76./ 76. 10./ 10. 41/ 27
2979. 59./ 172. 8./ 22. 41/ 27
3250. 37./ 278. 5./ 35. 41/ 27

B E A M N O. 8 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 34.26 KNS Vc= 70.74 KNS Vs= 0.00 KNS
Tu= 0.15 KN-MET Tc= 2.2 KN-MET Ts= 0.0 KN-MET LOAD 23
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 10 MM 2-LEGGED STIRRUPS AT 176. MM C/C FOR 1275. MM

AT END SUPPORT - Vu= 34.12 KNS Vc= 76.23 KNS Vs= 0.00 KNS
Tu= 0.10 KN-MET Tc= 2.3 KN-MET Ts= 0.0 KN-MET LOAD 15
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 10 MM 2-LEGGED STIRRUPS AT 176. MM C/C FOR 1275. MM

C:\Users\fierr\Desktop\Fierre\PROJECTS\PABLO GUTIERREZ\STAAD FILES\SUBSTRUCTURE\PG-SUBSTRUCTURE.anl Page 9 of 72

Saturday, February 03, 2024, 04:37 PM
STAAD SPACE -- PAGE NO. 10

_1002J__ 3249X 250X 400_1005J

| |
||================================== ======================================||
| 2No16|H 352. 0.TO 1501 | | |2No16 H 352.1613.TO|3250| | | |
| 9*10c/c176 | | | | | | | | | 9*10c/c176| |
| 2No16|H 48. 0.TO 3250 | | | | | | | | | | |
||=========================================================================||
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________ _________
| | | | | | | | | | | |
| oo | | oo | | oo | | oo | | oo | | oo |
| 2#16 | | 2#16 | | 2#16 | | 2#16 | | 2#16 | | 2#16 |
| | | | | | | | | | | |
| 2#16 | | 2#16 | | 2#16 | | 2#16 | | 2#16 | | 2#16 |
| oo | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_________| |_________| |_________| |_________| |_________| |_________|

ACI 318-11 BEAM NO. 9 DESIGN RESULTS

=============================================

LEN - 2150. MM FY - 420. FC - 21. MPA, SIZE - 250. X 400. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 48. 2 - 16MM 0. 654. YES NO

|----------------------------------------------------------------|
| CRITICAL POS MOMENT= 8.74 KN-MET AT 0.MM, LOAD 39|
| REQD STEEL= 88.MM2, RHO=0.0010, RHOMX=0.0159 RHOMN=0.0033 |
| MAX/MIN/ACTUAL BAR SPACING= 275./ 41./ 138. MMS |
| REQD. DEVELOPMENT LENGTH = 530. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 31521.3 cm^4

2 48. 2 - 16MM 1101. 2150. NO YES

|----------------------------------------------------------------|
| CRITICAL POS MOMENT= 4.79 KN-MET AT 2150.MM, LOAD 41|
| REQD STEEL= 48.MM2, RHO=0.0005, RHOMX=0.0159 RHOMN=0.0033 |
| MAX/MIN/ACTUAL BAR SPACING= 275./ 41./ 138. MMS |
| REQD. DEVELOPMENT LENGTH = 530. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 31521.3 cm^4

3 352. 2 - 16MM 0. 2150. YES YES

C:\Users\fierr\Desktop\Fierre\PROJECTS\PABLO GUTIERREZ\STAAD FILES\SUBSTRUCTURE\PG-SUBSTRUCTURE.anl Page 10 of 72

Saturday, February 03, 2024, 04:37 PM
STAAD SPACE -- PAGE NO. 11

|----------------------------------------------------------------|
| CRITICAL NEG MOMENT= 49.32 KN-MET AT 2150.MM, LOAD 27|
| REQD STEEL= 391.MM2, RHO=0.0044, RHOMX=0.0159 RHOMN=0.0033 |
| MAX/MIN/ACTUAL BAR SPACING= 275./ 41./ 138. MMS |
| REQD. DEVELOPMENT LENGTH = 530. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 31521.3 cm^4

REQUIRED REINF. STEEL SUMMARY :

-------------------------------
SECTION REINF STEEL(+VE/-VE) MOMENTS(+VE/-VE) LOAD(+VE/-VE)
( MM ) (SQ. MM ) (KNS-MET )

0. 67./ 220. 9./ 28. 39/ 29

179. 54./ 176. 7./ 22. 39/ 29
358. 38./ 137. 5./ 18. 39/ 29
537. 19./ 102. 2./ 13. 39/ 29
717. 0./ 72. 0./ 9. 0/ 29
896. 0./ 58. 0./ 7. 0/ 47
1075. 0./ 79. 0./ 10. 0/ 26
1254. 4./ 118. 0./ 15. 41/ 27
1433. 16./ 164. 2./ 21. 41/ 27
1612. 25./ 216. 3./ 27. 41/ 27
1792. 31./ 272. 4./ 34. 41/ 27
1971. 35./ 333. 5./ 42. 41/ 27
2150. 37./ 399. 5./ 49. 41/ 27

B E A M N O. 9 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 7.26 KNS Vc= 63.92 KNS Vs= 0.00 KNS
Tu= 3.09 KN-MET Tc= 2.2 KN-MET Ts= 4.1 KN-MET LOAD 30
STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 10 MM 2-LEGGED STIRRUPS AT 123. MM C/C FOR 725. MM
ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 1.06 SQ.CM.

AT END SUPPORT - Vu= 22.41 KNS Vc= 63.97 KNS Vs= 0.00 KNS
Tu= 3.09 KN-MET Tc= 2.2 KN-MET Ts= 4.1 KN-MET LOAD 30
STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 10 MM 2-LEGGED STIRRUPS AT 123. MM C/C FOR 725. MM
ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 1.06 SQ.CM.

C:\Users\fierr\Desktop\Fierre\PROJECTS\PABLO GUTIERREZ\STAAD FILES\SUBSTRUCTURE\PG-SUBSTRUCTURE.anl Page 11 of 72

Saturday, February 03, 2024, 04:37 PM
STAAD SPACE -- PAGE NO. 12

_1005J__ 2150X 250X 400_1008J

| |
||=========================================================================||
| 2No16|H 352. 0.TO 2150 | | | | | | | |
| 7*10c/c123 | | | | | | 7*10c/c123 | |
| 2No16|H 48. 0.TO |654 2No16|H 48.1101.TO 2150 | | | |
||====================== =====================================||
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________ _________
| | | | | | | | | | | |
| oo | | oo | | oo | | oo | | oo | | oo |
| 2#16 | | 2#16 | | 2#16 | | 2#16 | | 2#16 | | 2#16 |
| | | | | | | | | | | |
| 2#16 | | 2#16 | | | | 2#16 | | 2#16 | | 2#16 |
| oo | | oo | | | | oo | | oo | | oo |
| | | | | | | | | | | |
|_________| |_________| |_________| |_________| |_________| |_________|

ACI 318-11 BEAM NO. 10 DESIGN RESULTS

=============================================

LEN - 4250. MM FY - 420. FC - 21. MPA, SIZE - 250. X 400. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 48. 2 - 16MM 0. 3922. YES NO

|----------------------------------------------------------------|
| CRITICAL POS MOMENT= 36.32 KN-MET AT 2125.MM, LOAD 16|
| REQD STEEL= 289.MM2, RHO=0.0033, RHOMX=0.0159 RHOMN=0.0033 |
| MAX/MIN/ACTUAL BAR SPACING= 275./ 41./ 138. MMS |
| REQD. DEVELOPMENT LENGTH = 530. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 31521.3 cm^4

2 352. 2 - 16MM 0. 1397. YES NO

|----------------------------------------------------------------|
| CRITICAL NEG MOMENT= 47.42 KN-MET AT 0.MM, LOAD 29|
| REQD STEEL= 375.MM2, RHO=0.0043, RHOMX=0.0159 RHOMN=0.0033 |
| MAX/MIN/ACTUAL BAR SPACING= 275./ 41./ 138. MMS |
| REQD. DEVELOPMENT LENGTH = 530. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 31521.3 cm^4

3 352. 2 - 16MM 2676. 4250. NO YES

C:\Users\fierr\Desktop\Fierre\PROJECTS\PABLO GUTIERREZ\STAAD FILES\SUBSTRUCTURE\PG-SUBSTRUCTURE.anl Page 12 of 72

Saturday, February 03, 2024, 04:37 PM
STAAD SPACE -- PAGE NO. 13

|----------------------------------------------------------------|
| CRITICAL NEG MOMENT= 44.32 KN-MET AT 4250.MM, LOAD 27|
| REQD STEEL= 349.MM2, RHO=0.0040, RHOMX=0.0159 RHOMN=0.0033 |
| MAX/MIN/ACTUAL BAR SPACING= 275./ 41./ 138. MMS |
| REQD. DEVELOPMENT LENGTH = 530. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 31521.3 cm^4

REQUIRED REINF. STEEL SUMMARY :

-------------------------------
SECTION REINF STEEL(+VE/-VE) MOMENTS(+VE/-VE) LOAD(+VE/-VE)
( MM ) (SQ. MM ) (KNS-MET )

0. 0./ 383. 0./ 47. 0/ 29

354. 6./ 220. 1./ 28. 39/ 29
708. 69./ 80. 9./ 10. 39/ 29
1063. 151./ 0. 19./ 0. 27/ 0
1417. 212./ 0. 27./ 0. 27/ 0
1771. 271./ 0. 34./ 0. 16/ 0
2125. 289./ 0. 36./ 0. 16/ 0
2479. 263./ 0. 33./ 0. 16/ 0
2833. 198./ 0. 25./ 0. 16/ 0
3188. 127./ 0. 16./ 0. 29/ 0
3542. 50./ 70. 7./ 9. 41/ 27
3896. 0./ 203. 0./ 26. 0/ 27
4250. 0./ 356. 0./ 44. 0/ 27

B E A M N O. 10 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 48.59 KNS Vc= 69.16 KNS Vs= 0.00 KNS
Tu= 1.04 KN-MET Tc= 2.3 KN-MET Ts= 0.0 KN-MET LOAD 15
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 10 MM 2-LEGGED STIRRUPS AT 176. MM C/C FOR 1775. MM

AT END SUPPORT - Vu= 46.64 KNS Vc= 68.94 KNS Vs= 0.00 KNS
Tu= 1.04 KN-MET Tc= 2.3 KN-MET Ts= 0.0 KN-MET LOAD 15
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 10 MM 2-LEGGED STIRRUPS AT 176. MM C/C FOR 1775. MM

C:\Users\fierr\Desktop\Fierre\PROJECTS\PABLO GUTIERREZ\STAAD FILES\SUBSTRUCTURE\PG-SUBSTRUCTURE.anl Page 13 of 72

Saturday, February 03, 2024, 04:37 PM
STAAD SPACE -- PAGE NO. 14

_1008J__ 4250X 250X 400_1013J

| |
||======================= ============================||
| 2No16 H 352.| 0.TO 1397 2No16 H 352.2676.TO 4250 |
| 12*10c/c176 | | | | | | 12*10c/c176 |
| 2No16 H |48.| 0.TO 3922 | | | | | | |
||===================================================================== |
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________ _________
| | | | | | | | | | | |
| oo | | oo | | | | | | oo | | oo |
| 2#16 | | 2#16 | | | | | | 2#16 | | 2#16 |
| | | | | | | | | | | |
| 2#16 | | 2#16 | | 2#16 | | 2#16 | | 2#16 | | |
| oo | | oo | | oo | | oo | | oo | | |
| | | | | | | | | | | |
|_________| |_________| |_________| |_________| |_________| |_________|

ACI 318-11 BEAM NO. 15 DESIGN RESULTS

=============================================

LEN - 3100. MM FY - 420. FC - 21. MPA, SIZE - 250. X 400. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 48. 2 - 16MM 0. 3100. YES YES

|----------------------------------------------------------------|
| CRITICAL POS MOMENT= 35.21 KN-MET AT 0.MM, LOAD 38|
| REQD STEEL= 289.MM2, RHO=0.0033, RHOMX=0.0159 RHOMN=0.0033 |
| MAX/MIN/ACTUAL BAR SPACING= 275./ 41./ 138. MMS |
| REQD. DEVELOPMENT LENGTH = 530. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 31521.3 cm^4

2 352. 2 - 16MM 0. 1981. YES NO

|----------------------------------------------------------------|
| CRITICAL NEG MOMENT= 47.67 KN-MET AT 0.MM, LOAD 28|
| REQD STEEL= 377.MM2, RHO=0.0043, RHOMX=0.0159 RHOMN=0.0033 |
| MAX/MIN/ACTUAL BAR SPACING= 275./ 41./ 138. MMS |
| REQD. DEVELOPMENT LENGTH = 530. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 31521.3 cm^4

3 352. 2 - 16MM 1507. 3100. NO YES

C:\Users\fierr\Desktop\Fierre\PROJECTS\PABLO GUTIERREZ\STAAD FILES\SUBSTRUCTURE\PG-SUBSTRUCTURE.anl Page 14 of 72

Saturday, February 03, 2024, 04:37 PM
STAAD SPACE -- PAGE NO. 15

|----------------------------------------------------------------|
| CRITICAL NEG MOMENT= 43.49 KN-MET AT 3100.MM, LOAD 26|
| REQD STEEL= 343.MM2, RHO=0.0039, RHOMX=0.0159 RHOMN=0.0033 |
| MAX/MIN/ACTUAL BAR SPACING= 275./ 41./ 138. MMS |
| REQD. DEVELOPMENT LENGTH = 530. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 31521.3 cm^4

REQUIRED REINF. STEEL SUMMARY :

-------------------------------
SECTION REINF STEEL(+VE/-VE) MOMENTS(+VE/-VE) LOAD(+VE/-VE)
( MM ) (SQ. MM ) (KNS-MET )

0. 280./ 385. 35./ 48. 38/ 28

258. 270./ 281. 34./ 35. 38/ 28
517. 266./ 200. 33./ 25. 26/ 40
775. 253./ 129. 32./ 17. 26/ 40
1033. 230./ 67. 29./ 9. 26/ 40
1292. 196./ 14. 25./ 2. 26/ 40
1550. 149./ 0. 19./ 0. 26/ 0
1808. 105./ 0. 13./ 0. 16/ 0
2067. 118./ 0. 15./ 0. 28/ 0
2325. 130./ 65. 17./ 8. 28/ 38
2583. 135./ 142. 17./ 18. 40/ 26
2842. 146./ 241. 19./ 30. 40/ 26
3100. 151./ 349. 19./ 43. 40/ 26

B E A M N O. 15 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 26.50 KNS Vc= 70.54 KNS Vs= 0.00 KNS
Tu= 0.05 KN-MET Tc= 2.2 KN-MET Ts= 0.0 KN-MET LOAD 19
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 10 MM 2-LEGGED STIRRUPS AT 176. MM C/C FOR 1200. MM

AT END SUPPORT - Vu= 29.78 KNS Vc= 70.33 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 2.3 KN-MET Ts= 0.0 KN-MET LOAD 18
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 10 MM 2-LEGGED STIRRUPS AT 176. MM C/C FOR 1200. MM

C:\Users\fierr\Desktop\Fierre\PROJECTS\PABLO GUTIERREZ\STAAD FILES\SUBSTRUCTURE\PG-SUBSTRUCTURE.anl Page 15 of 72

Saturday, February 03, 2024, 04:37 PM
STAAD SPACE -- PAGE NO. 16

_1003J__ 3100X 250X 400_1006J

| |
||=========================================================================||
| 2No16|H 352. 0.TO 1981 | | 2No16|H 352.1507.TO 3100 | | | |
| 8*10c/c176 | | | | | | | | | 8*10c/c176| |
| 2No16|H 48. 0.TO 3100 | | | | | | | | | | |
||=========================================================================||
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________ _________
| | | | | | | | | | | |
| oo | | oo | | oo | | oo | | oo | | oo |
| 2#16 | | 2#16 | | 2#16 | | 2#16 | | 2#16 | | 2#16 |
| | | | | | | | | | | |
| 2#16 | | 2#16 | | 2#16 | | 2#16 | | 2#16 | | 2#16 |
| oo | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_________| |_________| |_________| |_________| |_________| |_________|

ACI 318-11 BEAM NO. 16 DESIGN RESULTS

=============================================

LEN - 2000. MM FY - 420. FC - 21. MPA, SIZE - 250. X 400. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 48. 2 - 16MM 0. 1047. YES NO

|----------------------------------------------------------------|
| CRITICAL POS MOMENT= 28.46 KN-MET AT 0.MM, LOAD 38|
| REQD STEEL= 289.MM2, RHO=0.0033, RHOMX=0.0159 RHOMN=0.0033 |
| MAX/MIN/ACTUAL BAR SPACING= 275./ 41./ 138. MMS |
| REQD. DEVELOPMENT LENGTH = 530. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 31521.3 cm^4

2 48. 2 - 16MM 759. 2000. NO YES

|----------------------------------------------------------------|
| CRITICAL POS MOMENT= 24.03 KN-MET AT 2000.MM, LOAD 40|
| REQD STEEL= 246.MM2, RHO=0.0028, RHOMX=0.0159 RHOMN=0.0033 |
| MAX/MIN/ACTUAL BAR SPACING= 275./ 41./ 138. MMS |
| REQD. DEVELOPMENT LENGTH = 530. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 31521.3 cm^4

3 352. 3 - 16MM 0. 2000. YES YES

C:\Users\fierr\Desktop\Fierre\PROJECTS\PABLO GUTIERREZ\STAAD FILES\SUBSTRUCTURE\PG-SUBSTRUCTURE.anl Page 16 of 72

Saturday, February 03, 2024, 04:37 PM
STAAD SPACE -- PAGE NO. 17

|----------------------------------------------------------------|
| CRITICAL NEG MOMENT= 63.68 KN-MET AT 2000.MM, LOAD 26|
| REQD STEEL= 514.MM2, RHO=0.0058, RHOMX=0.0159 RHOMN=0.0033 |
| MAX/MIN/ACTUAL BAR SPACING= 275./ 41./ 69. MMS |
| REQD. DEVELOPMENT LENGTH = 615. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 43579.4 cm^4

REQUIRED REINF. STEEL SUMMARY :

-------------------------------
SECTION REINF STEEL(+VE/-VE) MOMENTS(+VE/-VE) LOAD(+VE/-VE)
( MM ) (SQ. MM ) (KNS-MET )

0. 225./ 313. 28./ 39. 38/ 28

167. 183./ 251. 23./ 32. 38/ 28
333. 139./ 194. 18./ 25. 38/ 28
500. 93./ 142. 12./ 18. 38/ 28
667. 44./ 94. 6./ 12. 38/ 28
833. 0./ 51. 0./ 7. 0/ 28
1000. 0./ 73. 0./ 9. 0/ 26
1167. 37./ 135. 5./ 17. 40/ 26
1333. 71./ 203. 9./ 26. 40/ 26
1500. 104./ 275. 13./ 35. 40/ 26
1667. 134./ 353. 17./ 44. 40/ 26
1833. 163./ 436. 21./ 54. 40/ 26
2000. 189./ 525. 24./ 64. 40/ 26

B E A M N O. 16 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 7.41 KNS Vc= 65.43 KNS Vs= 0.00 KNS
Tu= 7.24 KN-MET Tc= 2.1 KN-MET Ts= 9.7 KN-MET LOAD 33
STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 10 MM 2-LEGGED STIRRUPS AT 123. MM C/C FOR 650. MM
ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 2.47 SQ.CM.

AT END SUPPORT - Vu= 16.31 KNS Vc= 65.43 KNS Vs= 0.00 KNS
Tu= 7.24 KN-MET Tc= 2.1 KN-MET Ts= 9.7 KN-MET LOAD 33
STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 10 MM 2-LEGGED STIRRUPS AT 123. MM C/C FOR 650. MM
ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 2.47 SQ.CM.

C:\Users\fierr\Desktop\Fierre\PROJECTS\PABLO GUTIERREZ\STAAD FILES\SUBSTRUCTURE\PG-SUBSTRUCTURE.anl Page 17 of 72

Saturday, February 03, 2024, 04:37 PM
STAAD SPACE -- PAGE NO. 18

_1006J__ 2000X 250X 400_1010J

| |
||=========================================================================||
| 3No16|H 352. 0.TO 2000 | | | | | | | | | |
| 7*10c/c123 | | | | | | | | 7*10c/c123 | |
| 2No16|H 48. 0.TO 1047 | 2No16 H 48. 759.TO 2000 | | | | | |
||=========================================================================||
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________ _________
| | | | | | | | | | | |
| ooo | | ooo | | ooo | | ooo | | ooo | | ooo |
| 3#16 | | 3#16 | | 3#16 | | 3#16 | | 3#16 | | 3#16 |
| | | | | | | | | | | |
| 2#16 | | 2#16 | | 2#16 | | 2#16 | | 2#16 | | 2#16 |
| oo | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_________| |_________| |_________| |_________| |_________| |_________|

ACI 318-11 BEAM NO. 17 DESIGN RESULTS

=============================================

LEN - 4175. MM FY - 420. FC - 21. MPA, SIZE - 250. X 400. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 48. 2 - 16MM 0. 3860. YES NO

|----------------------------------------------------------------|
| CRITICAL POS MOMENT= 29.46 KN-MET AT 1740.MM, LOAD 26|
| REQD STEEL= 289.MM2, RHO=0.0033, RHOMX=0.0159 RHOMN=0.0033 |
| MAX/MIN/ACTUAL BAR SPACING= 275./ 41./ 138. MMS |
| REQD. DEVELOPMENT LENGTH = 530. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 31521.3 cm^4

2 352. 3 - 16MM 0. 1733. YES NO

|----------------------------------------------------------------|
| CRITICAL NEG MOMENT= 50.69 KN-MET AT 0.MM, LOAD 28|
| REQD STEEL= 403.MM2, RHO=0.0046, RHOMX=0.0159 RHOMN=0.0033 |
| MAX/MIN/ACTUAL BAR SPACING= 275./ 41./ 69. MMS |
| REQD. DEVELOPMENT LENGTH = 615. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 43579.4 cm^4

3 352. 2 - 16MM 2616. 4175. NO YES

C:\Users\fierr\Desktop\Fierre\PROJECTS\PABLO GUTIERREZ\STAAD FILES\SUBSTRUCTURE\PG-SUBSTRUCTURE.anl Page 18 of 72

Saturday, February 03, 2024, 04:37 PM
STAAD SPACE -- PAGE NO. 19

|----------------------------------------------------------------|
| CRITICAL NEG MOMENT= 42.28 KN-MET AT 4175.MM, LOAD 26|
| REQD STEEL= 333.MM2, RHO=0.0038, RHOMX=0.0159 RHOMN=0.0033 |
| MAX/MIN/ACTUAL BAR SPACING= 275./ 41./ 138. MMS |
| REQD. DEVELOPMENT LENGTH = 530. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 31521.3 cm^4

REQUIRED REINF. STEEL SUMMARY :

-------------------------------
SECTION REINF STEEL(+VE/-VE) MOMENTS(+VE/-VE) LOAD(+VE/-VE)
( MM ) (SQ. MM ) (KNS-MET )

0. 0./ 411. 0./ 51. 0/ 28

348. 36./ 250. 5./ 32. 38/ 28
696. 95./ 114. 12./ 15. 38/ 28
1044. 163./ 26. 21./ 3. 26/ 40
1392. 212./ 0. 27./ 0. 26/ 0
1740. 233./ 0. 29./ 0. 26/ 0
2088. 229./ 0. 29./ 0. 16/ 0
2435. 211./ 0. 27./ 0. 16/ 0
2783. 162./ 0. 21./ 0. 28/ 0
3131. 116./ 0. 15./ 0. 28/ 0
3479. 52./ 66. 7./ 9. 40/ 26
3827. 0./ 193. 0./ 25. 0/ 26
4175. 0./ 339. 0./ 42. 0/ 26

B E A M N O. 17 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 49.01 KNS Vc= 69.08 KNS Vs= 0.00 KNS
Tu= 0.68 KN-MET Tc= 2.3 KN-MET Ts= 0.0 KN-MET LOAD 15
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 10 MM 2-LEGGED STIRRUPS AT 176. MM C/C FOR 1738. MM

AT END SUPPORT - Vu= 45.76 KNS Vc= 69.19 KNS Vs= 0.00 KNS
Tu= 0.68 KN-MET Tc= 2.3 KN-MET Ts= 0.0 KN-MET LOAD 15
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 10 MM 2-LEGGED STIRRUPS AT 176. MM C/C FOR 1738. MM

C:\Users\fierr\Desktop\Fierre\PROJECTS\PABLO GUTIERREZ\STAAD FILES\SUBSTRUCTURE\PG-SUBSTRUCTURE.anl Page 19 of 72

Saturday, February 03, 2024, 04:37 PM
STAAD SPACE -- PAGE NO. 20

_1010J__ 4175X 250X 400_1014J

| |
||============================== ============================||
| 3No16 H 352.| 0.TO 1733| | 2No16 H 352.2616.TO 4175 |
| 11*10c/c176 | | | | | | | | 11*10c/c176 |
| 2No16 H |48.| 0.TO 3860| | | | | | | | |
||===================================================================== |
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________ _________
| | | | | | | | | | | |
| ooo | | ooo | | ooo | | | | oo | | oo |
| 3#16 | | 3#16 | | 3#16 | | | | 2#16 | | 2#16 |
| | | | | | | | | | | |
| 2#16 | | 2#16 | | 2#16 | | 2#16 | | 2#16 | | |
| oo | | oo | | oo | | oo | | oo | | |
| | | | | | | | | | | |
|_________| |_________| |_________| |_________| |_________| |_________|

ACI 318-11 BEAM NO. 22 DESIGN RESULTS

=============================================

LEN - 3752. MM FY - 420. FC - 21. MPA, SIZE - 250. X 400. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 48. 2 - 16MM 0. 3752. YES YES

|----------------------------------------------------------------|
| CRITICAL POS MOMENT= 38.21 KN-MET AT 3752.MM, LOAD 45|
| REQD STEEL= 299.MM2, RHO=0.0034, RHOMX=0.0159 RHOMN=0.0033 |
| MAX/MIN/ACTUAL BAR SPACING= 275./ 41./ 138. MMS |
| REQD. DEVELOPMENT LENGTH = 530. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 31521.3 cm^4

2 352. 3 - 16MM 0. 1940. YES NO

|----------------------------------------------------------------|
| CRITICAL NEG MOMENT= 64.83 KN-MET AT 0.MM, LOAD 33|
| REQD STEEL= 524.MM2, RHO=0.0060, RHOMX=0.0159 RHOMN=0.0033 |
| MAX/MIN/ACTUAL BAR SPACING= 275./ 41./ 69. MMS |
| REQD. DEVELOPMENT LENGTH = 615. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 43579.4 cm^4

3 352. 3 - 16MM 1656. 3752. NO YES

C:\Users\fierr\Desktop\Fierre\PROJECTS\PABLO GUTIERREZ\STAAD FILES\SUBSTRUCTURE\PG-SUBSTRUCTURE.anl Page 20 of 72

Saturday, February 03, 2024, 04:37 PM
STAAD SPACE -- PAGE NO. 21

|----------------------------------------------------------------|
| CRITICAL NEG MOMENT= 66.44 KN-MET AT 3752.MM, LOAD 30|
| REQD STEEL= 538.MM2, RHO=0.0061, RHOMX=0.0159 RHOMN=0.0033 |
| MAX/MIN/ACTUAL BAR SPACING= 275./ 41./ 69. MMS |
| REQD. DEVELOPMENT LENGTH = 615. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 43579.4 cm^4

REQUIRED REINF. STEEL SUMMARY :

-------------------------------
SECTION REINF STEEL(+VE/-VE) MOMENTS(+VE/-VE) LOAD(+VE/-VE)
( MM ) (SQ. MM ) (KNS-MET )

0. 210./ 535. 27./ 65. 42/ 33

313. 217./ 376. 28./ 47. 30/ 45
625. 229./ 253. 29./ 32. 30/ 45
938. 227./ 143. 29./ 18. 30/ 45
1251. 210./ 47. 27./ 6. 30/ 45
1563. 175./ 0. 22./ 0. 30/ 0
1876. 150./ 0. 19./ 0. 16/ 0
2189. 198./ 0. 25./ 0. 33/ 0
2501. 233./ 50. 29./ 7. 33/ 42
2814. 252./ 135. 32./ 17. 33/ 42
3127. 278./ 255. 35./ 32. 45/ 30
3439. 296./ 393. 37./ 49. 45/ 30
3752. 305./ 550. 38./ 66. 45/ 30

B E A M N O. 22 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 28.23 KNS Vc= 74.16 KNS Vs= 0.00 KNS
Tu= 0.45 KN-MET Tc= 2.3 KN-MET Ts= 0.0 KN-MET LOAD 21
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 10 MM 2-LEGGED STIRRUPS AT 176. MM C/C FOR 1526. MM

AT END SUPPORT - Vu= 40.39 KNS Vc= 67.57 KNS Vs= 0.00 KNS
Tu= 0.64 KN-MET Tc= 2.3 KN-MET Ts= 0.0 KN-MET LOAD 15
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 10 MM 2-LEGGED STIRRUPS AT 176. MM C/C FOR 1526. MM

C:\Users\fierr\Desktop\Fierre\PROJECTS\PABLO GUTIERREZ\STAAD FILES\SUBSTRUCTURE\PG-SUBSTRUCTURE.anl Page 21 of 72

Saturday, February 03, 2024, 04:37 PM
STAAD SPACE -- PAGE NO. 22

_1001J__ 3752X 250X 400_1002J

| |
||=========================================================================||
| 3No16 H 352.| 0.TO 1940| | 3No16 H 352.1656.TO 3752| | | | | |
| 10*10c/c176 | | | | | | | | | | | | 10*10c/c176 | |
| 2No16 H |48.| 0.TO 3752| | | | | | | | | | | | | |
||=========================================================================||
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________ _________
| | | | | | | | | | | |
| ooo | | ooo | | ooo | | ooo | | ooo | | ooo |
| 3#16 | | 3#16 | | 3#16 | | 3#16 | | 3#16 | | 3#16 |
| | | | | | | | | | | |
| 2#16 | | 2#16 | | 2#16 | | 2#16 | | 2#16 | | 2#16 |
| oo | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_________| |_________| |_________| |_________| |_________| |_________|

ACI 318-11 BEAM NO. 23 DESIGN RESULTS

=============================================

LEN - 3752. MM FY - 420. FC - 21. MPA, SIZE - 250. X 400. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 48. 2 - 16MM 0. 3752. YES YES

|----------------------------------------------------------------|
| CRITICAL POS MOMENT= 32.15 KN-MET AT 3439.MM, LOAD 45|
| REQD STEEL= 289.MM2, RHO=0.0033, RHOMX=0.0159 RHOMN=0.0033 |
| MAX/MIN/ACTUAL BAR SPACING= 275./ 41./ 138. MMS |
| REQD. DEVELOPMENT LENGTH = 530. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 31521.3 cm^4

2 352. 3 - 16MM 0. 1940. YES NO

|----------------------------------------------------------------|
| CRITICAL NEG MOMENT= 63.45 KN-MET AT 0.MM, LOAD 33|
| REQD STEEL= 512.MM2, RHO=0.0058, RHOMX=0.0159 RHOMN=0.0033 |
| MAX/MIN/ACTUAL BAR SPACING= 275./ 41./ 69. MMS |
| REQD. DEVELOPMENT LENGTH = 615. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 43579.4 cm^4

3 352. 3 - 16MM 1656. 3752. NO YES

C:\Users\fierr\Desktop\Fierre\PROJECTS\PABLO GUTIERREZ\STAAD FILES\SUBSTRUCTURE\PG-SUBSTRUCTURE.anl Page 22 of 72

Saturday, February 03, 2024, 04:37 PM
STAAD SPACE -- PAGE NO. 23

|----------------------------------------------------------------|
| CRITICAL NEG MOMENT= 67.07 KN-MET AT 3752.MM, LOAD 30|
| REQD STEEL= 544.MM2, RHO=0.0062, RHOMX=0.0159 RHOMN=0.0033 |
| MAX/MIN/ACTUAL BAR SPACING= 275./ 41./ 69. MMS |
| REQD. DEVELOPMENT LENGTH = 615. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 43579.4 cm^4

REQUIRED REINF. STEEL SUMMARY :

-------------------------------
SECTION REINF STEEL(+VE/-VE) MOMENTS(+VE/-VE) LOAD(+VE/-VE)
( MM ) (SQ. MM ) (KNS-MET )

0. 173./ 523. 22./ 63. 42/ 33

313. 189./ 356. 24./ 44. 30/ 45
625. 218./ 232. 28./ 29. 30/ 45
938. 231./ 122. 29./ 16. 30/ 45
1251. 226./ 28. 29./ 4. 30/ 45
1563. 202./ 0. 26./ 0. 16/ 0
1876. 191./ 0. 24./ 0. 16/ 0
2189. 212./ 0. 27./ 0. 33/ 0
2501. 234./ 31. 30./ 4. 33/ 42
2814. 236./ 117. 30./ 15. 33/ 42
3127. 250./ 243. 32./ 31. 45/ 30
3439. 255./ 390. 32./ 48. 45/ 30
3752. 252./ 555. 32./ 67. 45/ 30

B E A M N O. 23 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 31.44 KNS Vc= 74.70 KNS Vs= 0.00 KNS
Tu= 0.48 KN-MET Tc= 2.3 KN-MET Ts= 0.0 KN-MET LOAD 21
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 10 MM 2-LEGGED STIRRUPS AT 176. MM C/C FOR 1526. MM

AT END SUPPORT - Vu= 44.75 KNS Vc= 67.41 KNS Vs= 0.00 KNS
Tu= 0.53 KN-MET Tc= 2.3 KN-MET Ts= 0.0 KN-MET LOAD 15
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 10 MM 2-LEGGED STIRRUPS AT 176. MM C/C FOR 1526. MM

C:\Users\fierr\Desktop\Fierre\PROJECTS\PABLO GUTIERREZ\STAAD FILES\SUBSTRUCTURE\PG-SUBSTRUCTURE.anl Page 23 of 72

Saturday, February 03, 2024, 04:37 PM
STAAD SPACE -- PAGE NO. 24

_1004J__ 3752X 250X 400_1005J

ACI 318-11 BEAM NO. 24 DESIGN RESULTS

=============================================

LEN - 3752. MM FY - 420. FC - 21. MPA, SIZE - 250. X 400. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 48. 2 - 16MM 0. 3752. YES YES

|----------------------------------------------------------------|
| CRITICAL POS MOMENT= 29.96 KN-MET AT 1251.MM, LOAD 30|
| REQD STEEL= 289.MM2, RHO=0.0033, RHOMX=0.0159 RHOMN=0.0033 |
| MAX/MIN/ACTUAL BAR SPACING= 275./ 41./ 138. MMS |
| REQD. DEVELOPMENT LENGTH = 530. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 31521.3 cm^4

2 352. 3 - 16MM 0. 1940. YES NO

|----------------------------------------------------------------|
| CRITICAL NEG MOMENT= 60.45 KN-MET AT 0.MM, LOAD 33|
| REQD STEEL= 486.MM2, RHO=0.0055, RHOMX=0.0159 RHOMN=0.0033 |
| MAX/MIN/ACTUAL BAR SPACING= 275./ 41./ 69. MMS |
| REQD. DEVELOPMENT LENGTH = 615. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 43579.4 cm^4

3 352. 3 - 16MM 1969. 3752. NO YES

C:\Users\fierr\Desktop\Fierre\PROJECTS\PABLO GUTIERREZ\STAAD FILES\SUBSTRUCTURE\PG-SUBSTRUCTURE.anl Page 24 of 72

Saturday, February 03, 2024, 04:37 PM
STAAD SPACE -- PAGE NO. 25

|----------------------------------------------------------------|
| CRITICAL NEG MOMENT= 51.41 KN-MET AT 3752.MM, LOAD 30|
| REQD STEEL= 409.MM2, RHO=0.0046, RHOMX=0.0159 RHOMN=0.0033 |
| MAX/MIN/ACTUAL BAR SPACING= 275./ 41./ 69. MMS |
| REQD. DEVELOPMENT LENGTH = 615. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 43579.4 cm^4

REQUIRED REINF. STEEL SUMMARY :

-------------------------------
SECTION REINF STEEL(+VE/-VE) MOMENTS(+VE/-VE) LOAD(+VE/-VE)
( MM ) (SQ. MM ) (KNS-MET )

0. 130./ 496. 17./ 60. 42/ 33

313. 158./ 336. 20./ 42. 42/ 33
625. 199./ 218. 25./ 28. 30/ 45
938. 227./ 116. 29./ 15. 30/ 45
1251. 237./ 30. 30./ 4. 30/ 45
1563. 225./ 0. 29./ 0. 30/ 0
1876. 220./ 0. 28./ 0. 16/ 0
2189. 195./ 0. 25./ 0. 33/ 0
2501. 211./ 0. 27./ 0. 33/ 0
2814. 206./ 49. 26./ 6. 33/ 42
3127. 198./ 145. 25./ 19. 45/ 30
3439. 195./ 273. 25./ 34. 45/ 30
3752. 184./ 417. 23./ 51. 45/ 30

B E A M N O. 24 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 33.17 KNS Vc= 74.09 KNS Vs= 0.00 KNS
Tu= 0.20 KN-MET Tc= 2.2 KN-MET Ts= 0.0 KN-MET LOAD 21
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 10 MM 2-LEGGED STIRRUPS AT 176. MM C/C FOR 1526. MM

AT END SUPPORT - Vu= 42.23 KNS Vc= 69.08 KNS Vs= 0.00 KNS
Tu= 0.26 KN-MET Tc= 2.3 KN-MET Ts= 0.0 KN-MET LOAD 15
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 10 MM 2-LEGGED STIRRUPS AT 176. MM C/C FOR 1526. MM

C:\Users\fierr\Desktop\Fierre\PROJECTS\PABLO GUTIERREZ\STAAD FILES\SUBSTRUCTURE\PG-SUBSTRUCTURE.anl Page 25 of 72

Saturday, February 03, 2024, 04:37 PM
STAAD SPACE -- PAGE NO. 26

_1007J__ 3752X 250X 400_1008J

| |
||=========================================================================||
| 3No16 H 352.| 0.TO 1940| | | | 3No16 H 352.1969.TO 3752 | | | |
| 10*10c/c176 | | | | | | | | | | | | 10*10c/c176 | |
| 2No16 H |48.| 0.TO 3752| | | | | | | | | | | | | |
||=========================================================================||
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________ _________
| | | | | | | | | | | |
| ooo | | ooo | | ooo | | ooo | | ooo | | ooo |
| 3#16 | | 3#16 | | 3#16 | | 3#16 | | 3#16 | | 3#16 |
| | | | | | | | | | | |
| 2#16 | | 2#16 | | 2#16 | | 2#16 | | 2#16 | | 2#16 |
| oo | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_________| |_________| |_________| |_________| |_________| |_________|

ACI 318-11 BEAM NO. 25 DESIGN RESULTS

=============================================

LEN - 3600. MM FY - 420. FC - 21. MPA, SIZE - 250. X 400. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 48. 2 - 16MM 0. 3600. YES YES

|----------------------------------------------------------------|
| CRITICAL POS MOMENT= 45.31 KN-MET AT 3600.MM, LOAD 45|
| REQD STEEL= 358.MM2, RHO=0.0041, RHOMX=0.0159 RHOMN=0.0033 |
| MAX/MIN/ACTUAL BAR SPACING= 275./ 41./ 138. MMS |
| REQD. DEVELOPMENT LENGTH = 530. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 31521.3 cm^4

2 352. 4 - 16MM 0. 2409. YES NO

|----------------------------------------------------------------|
| CRITICAL NEG MOMENT= 87.23 KN-MET AT 0.MM, LOAD 33|
| REQD STEEL= 726.MM2, RHO=0.0083, RHOMX=0.0159 RHOMN=0.0033 |
| MAX/MIN/ACTUAL BAR SPACING= 275./ 41./ 46. MMS |
| REQD. DEVELOPMENT LENGTH = 923. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 54298.1 cm^4

3 352. 3 - 16MM 1561. 3600. NO YES

C:\Users\fierr\Desktop\Fierre\PROJECTS\PABLO GUTIERREZ\STAAD FILES\SUBSTRUCTURE\PG-SUBSTRUCTURE.anl Page 26 of 72

Saturday, February 03, 2024, 04:37 PM
STAAD SPACE -- PAGE NO. 27

|----------------------------------------------------------------|
| CRITICAL NEG MOMENT= 62.31 KN-MET AT 3600.MM, LOAD 31|
| REQD STEEL= 502.MM2, RHO=0.0057, RHOMX=0.0159 RHOMN=0.0033 |
| MAX/MIN/ACTUAL BAR SPACING= 275./ 41./ 69. MMS |
| REQD. DEVELOPMENT LENGTH = 615. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 43579.4 cm^4

REQUIRED REINF. STEEL SUMMARY :

-------------------------------
SECTION REINF STEEL(+VE/-VE) MOMENTS(+VE/-VE) LOAD(+VE/-VE)
( MM ) (SQ. MM ) (KNS-MET )

0. 254./ 743. 32./ 87. 43/ 33

300. 254./ 554. 32./ 67. 43/ 33
600. 259./ 404. 33./ 50. 31/ 45
900. 252./ 273. 32./ 34. 31/ 45
1200. 231./ 156. 29./ 20. 31/ 45
1500. 193./ 54. 25./ 7. 31/ 45
1800. 138./ 0. 18./ 0. 31/ 0
2100. 139./ 0. 18./ 0. 33/ 0
2400. 195./ 33. 25./ 4. 33/ 43
2700. 237./ 117. 30./ 15. 45/ 31
3000. 288./ 233. 36./ 29. 45/ 31
3300. 330./ 364. 41./ 45. 45/ 31
3600. 365./ 513. 45./ 62. 45/ 31

B E A M N O. 25 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 29.30 KNS Vc= 70.98 KNS Vs= 0.00 KNS
Tu= 1.00 KN-MET Tc= 2.3 KN-MET Ts= 0.0 KN-MET LOAD 21
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 10 MM 2-LEGGED STIRRUPS AT 176. MM C/C FOR 1450. MM

AT END SUPPORT - Vu= 38.12 KNS Vc= 68.66 KNS Vs= 0.00 KNS
Tu= 1.21 KN-MET Tc= 2.3 KN-MET Ts= 0.0 KN-MET LOAD 15
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 10 MM 2-LEGGED STIRRUPS AT 176. MM C/C FOR 1450. MM

C:\Users\fierr\Desktop\Fierre\PROJECTS\PABLO GUTIERREZ\STAAD FILES\SUBSTRUCTURE\PG-SUBSTRUCTURE.anl Page 27 of 72

Saturday, February 03, 2024, 04:37 PM
STAAD SPACE -- PAGE NO. 28

_1012J__ 3600X 250X 400_1013J

| |
||=========================================================================||
| 4No16 H 352.| 0.TO 2409| | 3No16|H 352.1561.TO 3600 | | | | | |
| 10*10c/c176 | | | | | | | | | | | | 10*10c/c176 | |
| 2No16 H |48.| 0.TO 3600| | | | | | | | | | | | | |
||=========================================================================||
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________ _________
| | | | | | | | | | | |
| oooo | | oooo | | oooo | | oooo | | ooo | | ooo |
| 4#16 | | 4#16 | | 4#16 | | 3#16 | | 3#16 | | 3#16 |
| | | | | | | | | | | |
| 2#16 | | 2#16 | | 2#16 | | 2#16 | | 2#16 | | 2#16 |
| oo | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_________| |_________| |_________| |_________| |_________| |_________|

ACI 318-11 BEAM NO. 26 DESIGN RESULTS

=============================================

LEN - 3675. MM FY - 420. FC - 21. MPA, SIZE - 250. X 400. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 48. 3 - 16MM 0. 3675. YES YES

|----------------------------------------------------------------|
| CRITICAL POS MOMENT= 51.04 KN-MET AT 3675.MM, LOAD 45|
| REQD STEEL= 406.MM2, RHO=0.0046, RHOMX=0.0159 RHOMN=0.0033 |
| MAX/MIN/ACTUAL BAR SPACING= 275./ 41./ 69. MMS |
| REQD. DEVELOPMENT LENGTH = 615. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 43579.4 cm^4

2 352. 4 - 16MM 0. 2440. YES NO

|----------------------------------------------------------------|
| CRITICAL NEG MOMENT= 92.16 KN-MET AT 0.MM, LOAD 33|
| REQD STEEL= 772.MM2, RHO=0.0088, RHOMX=0.0159 RHOMN=0.0033 |
| MAX/MIN/ACTUAL BAR SPACING= 275./ 41./ 46. MMS |
| REQD. DEVELOPMENT LENGTH = 923. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 54298.1 cm^4

3 352. 2 - 16MM 1914. 3675. NO YES

C:\Users\fierr\Desktop\Fierre\PROJECTS\PABLO GUTIERREZ\STAAD FILES\SUBSTRUCTURE\PG-SUBSTRUCTURE.anl Page 28 of 72

Saturday, February 03, 2024, 04:37 PM
STAAD SPACE -- PAGE NO. 29

|----------------------------------------------------------------|
| CRITICAL NEG MOMENT= 39.27 KN-MET AT 3675.MM, LOAD 30|
| REQD STEEL= 308.MM2, RHO=0.0035, RHOMX=0.0159 RHOMN=0.0033 |
| MAX/MIN/ACTUAL BAR SPACING= 275./ 41./ 138. MMS |
| REQD. DEVELOPMENT LENGTH = 530. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 31521.3 cm^4

REQUIRED REINF. STEEL SUMMARY :

-------------------------------
SECTION REINF STEEL(+VE/-VE) MOMENTS(+VE/-VE) LOAD(+VE/-VE)
( MM ) (SQ. MM ) (KNS-MET )

0. 108./ 790. 14./ 92. 42/ 33

306. 132./ 583. 17./ 70. 42/ 33
612. 147./ 402. 19./ 50. 42/ 33
919. 157./ 248. 20./ 31. 30/ 45
1225. 169./ 129. 22./ 17. 30/ 45
1531. 164./ 24. 21./ 3. 30/ 45
1838. 147./ 0. 19./ 0. 16/ 0
2144. 189./ 0. 24./ 0. 33/ 0
2450. 257./ 0. 32./ 0. 33/ 0
2756. 310./ 49. 39./ 6. 33/ 42
3063. 350./ 121. 44./ 16. 33/ 42
3369. 378./ 203. 47./ 26. 33/ 42
3675. 414./ 314. 51./ 39. 45/ 30

B E A M N O. 26 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 40.00 KNS Vc= 69.72 KNS Vs= 0.00 KNS
Tu= 0.81 KN-MET Tc= 2.3 KN-MET Ts= 0.0 KN-MET LOAD 15
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 10 MM 2-LEGGED STIRRUPS AT 176. MM C/C FOR 1488. MM

AT END SUPPORT - Vu= 32.92 KNS Vc= 71.02 KNS Vs= 0.00 KNS
Tu= 0.73 KN-MET Tc= 2.3 KN-MET Ts= 0.0 KN-MET LOAD 24
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 10 MM 2-LEGGED STIRRUPS AT 176. MM C/C FOR 1488. MM

C:\Users\fierr\Desktop\Fierre\PROJECTS\PABLO GUTIERREZ\STAAD FILES\SUBSTRUCTURE\PG-SUBSTRUCTURE.anl Page 29 of 72

Saturday, February 03, 2024, 04:37 PM
STAAD SPACE -- PAGE NO. 30

_1002J__ 3675X 250X 400_1003J

| |
||=========================================================================||
| 4No16 H 352.| 0.TO 2440| | | | 2No16 H 352.1914.TO 3675 | | | |
| 10*10c/c176 | | | | | | | | | | | | 10*10c/c176 | |
| 3No16 H |48.| 0.TO 3675| | | | | | | | | | | | | |
||=========================================================================||
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________ _________
| | | | | | | | | | | |
| oooo | | oooo | | oooo | | oooo | | oo | | oo |
| 4#16 | | 4#16 | | 4#16 | | 2#16 | | 2#16 | | 2#16 |
| | | | | | | | | | | |
| 3#16 | | 3#16 | | 3#16 | | 3#16 | | 3#16 | | 3#16 |
| ooo | | ooo | | ooo | | ooo | | ooo | | ooo |
| | | | | | | | | | | |
|_________| |_________| |_________| |_________| |_________| |_________|

ACI 318-11 BEAM NO. 27 DESIGN RESULTS

=============================================

LEN - 3675. MM FY - 420. FC - 21. MPA, SIZE - 250. X 400. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 48. 2 - 16MM 0. 3675. YES YES

|----------------------------------------------------------------|
| CRITICAL POS MOMENT= 43.28 KN-MET AT 3675.MM, LOAD 45|
| REQD STEEL= 341.MM2, RHO=0.0039, RHOMX=0.0159 RHOMN=0.0033 |
| MAX/MIN/ACTUAL BAR SPACING= 275./ 41./ 138. MMS |
| REQD. DEVELOPMENT LENGTH = 530. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 31521.3 cm^4

2 352. 4 - 16MM 0. 2440. YES NO

|----------------------------------------------------------------|
| CRITICAL NEG MOMENT= 91.29 KN-MET AT 0.MM, LOAD 33|
| REQD STEEL= 764.MM2, RHO=0.0087, RHOMX=0.0159 RHOMN=0.0033 |
| MAX/MIN/ACTUAL BAR SPACING= 275./ 41./ 46. MMS |
| REQD. DEVELOPMENT LENGTH = 923. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 54298.1 cm^4

3 352. 2 - 16MM 1914. 3675. NO YES

C:\Users\fierr\Desktop\Fierre\PROJECTS\PABLO GUTIERREZ\STAAD FILES\SUBSTRUCTURE\PG-SUBSTRUCTURE.anl Page 30 of 72

Saturday, February 03, 2024, 04:37 PM
STAAD SPACE -- PAGE NO. 31

|----------------------------------------------------------------|
| CRITICAL NEG MOMENT= 37.77 KN-MET AT 3675.MM, LOAD 30|
| REQD STEEL= 296.MM2, RHO=0.0034, RHOMX=0.0159 RHOMN=0.0033 |
| MAX/MIN/ACTUAL BAR SPACING= 275./ 41./ 138. MMS |
| REQD. DEVELOPMENT LENGTH = 530. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 31521.3 cm^4

REQUIRED REINF. STEEL SUMMARY :

-------------------------------
SECTION REINF STEEL(+VE/-VE) MOMENTS(+VE/-VE) LOAD(+VE/-VE)
( MM ) (SQ. MM ) (KNS-MET )

0. 51./ 782. 7./ 91. 42/ 33

306. 88./ 568. 11./ 68. 42/ 33
612. 117./ 381. 15./ 47. 42/ 33
919. 141./ 225. 18./ 29. 30/ 45
1225. 168./ 109. 21./ 14. 30/ 45
1531. 175./ 9. 22./ 1. 30/ 45
1838. 180./ 0. 23./ 0. 16/ 0
2144. 198./ 0. 25./ 0. 33/ 0
2450. 253./ 0. 32./ 0. 33/ 0
2756. 289./ 31. 36./ 4. 33/ 42
3063. 311./ 102. 39./ 13. 33/ 42
3369. 325./ 188. 41./ 24. 45/ 30
3675. 348./ 301. 43./ 38. 45/ 30

B E A M N O. 27 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 44.69 KNS Vc= 68.68 KNS Vs= 0.00 KNS
Tu= 0.40 KN-MET Tc= 2.3 KN-MET Ts= 0.0 KN-MET LOAD 15
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 10 MM 2-LEGGED STIRRUPS AT 176. MM C/C FOR 1488. MM

AT END SUPPORT - Vu= 29.44 KNS Vc= 74.91 KNS Vs= 0.00 KNS
Tu= 0.36 KN-MET Tc= 2.3 KN-MET Ts= 0.0 KN-MET LOAD 20
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 10 MM 2-LEGGED STIRRUPS AT 176. MM C/C FOR 1488. MM

C:\Users\fierr\Desktop\Fierre\PROJECTS\PABLO GUTIERREZ\STAAD FILES\SUBSTRUCTURE\PG-SUBSTRUCTURE.anl Page 31 of 72

Saturday, February 03, 2024, 04:37 PM
STAAD SPACE -- PAGE NO. 32

_1005J__ 3675X 250X 400_1006J

| |
||=========================================================================||
| 4No16 H 352.| 0.TO 2440| | | | 2No16 H 352.1914.TO 3675 | | | |
| 10*10c/c176 | | | | | | | | | | | | 10*10c/c176 | |
| 2No16 H |48.| 0.TO 3675| | | | | | | | | | | | | |
||=========================================================================||
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________ _________
| | | | | | | | | | | |
| oooo | | oooo | | oooo | | oooo | | oo | | oo |
| 4#16 | | 4#16 | | 4#16 | | 2#16 | | 2#16 | | 2#16 |
| | | | | | | | | | | |
| 2#16 | | 2#16 | | 2#16 | | 2#16 | | 2#16 | | 2#16 |
| oo | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_________| |_________| |_________| |_________| |_________| |_________|

ACI 318-11 BEAM NO. 28 DESIGN RESULTS

=============================================

LEN - 1600. MM FY - 420. FC - 21. MPA, SIZE - 250. X 400. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 48. 2 - 16MM 0. 1047. YES NO

|----------------------------------------------------------------|
| CRITICAL POS MOMENT= 28.86 KN-MET AT 0.MM, LOAD 42|
| REQD STEEL= 289.MM2, RHO=0.0033, RHOMX=0.0159 RHOMN=0.0033 |
| MAX/MIN/ACTUAL BAR SPACING= 275./ 41./ 138. MMS |
| REQD. DEVELOPMENT LENGTH = 530. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 31521.3 cm^4

2 48. 3 - 16MM 412. 1600. NO YES

|----------------------------------------------------------------|
| CRITICAL POS MOMENT= 64.10 KN-MET AT 1600.MM, LOAD 45|
| REQD STEEL= 518.MM2, RHO=0.0059, RHOMX=0.0159 RHOMN=0.0033 |
| MAX/MIN/ACTUAL BAR SPACING= 275./ 41./ 69. MMS |
| REQD. DEVELOPMENT LENGTH = 615. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 43579.4 cm^4

3 352. 4 - 16MM 0. 1600. YES YES

C:\Users\fierr\Desktop\Fierre\PROJECTS\PABLO GUTIERREZ\STAAD FILES\SUBSTRUCTURE\PG-SUBSTRUCTURE.anl Page 32 of 72

Saturday, February 03, 2024, 04:37 PM
STAAD SPACE -- PAGE NO. 33

|----------------------------------------------------------------|
| CRITICAL NEG MOMENT= 90.67 KN-MET AT 0.MM, LOAD 33|
| REQD STEEL= 758.MM2, RHO=0.0086, RHOMX=0.0159 RHOMN=0.0033 |
| MAX/MIN/ACTUAL BAR SPACING= 275./ 41./ 46. MMS |
| REQD. DEVELOPMENT LENGTH = 923. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 54298.1 cm^4

REQUIRED REINF. STEEL SUMMARY :

-------------------------------
SECTION REINF STEEL(+VE/-VE) MOMENTS(+VE/-VE) LOAD(+VE/-VE)
( MM ) (SQ. MM ) (KNS-MET )

0. 228./ 776. 29./ 91. 42/ 33

133. 193./ 635. 25./ 76. 42/ 33
267. 157./ 503. 20./ 61. 42/ 33
400. 120./ 379. 15./ 47. 42/ 33
533. 81./ 262. 11./ 33. 42/ 33
667. 41./ 153. 5./ 20. 42/ 33
800. 0./ 50. 0./ 6. 0/ 33
933. 53./ 53. 7./ 7. 45/ 30
1067. 148./ 101. 19./ 13. 45/ 30
1200. 242./ 155. 31./ 20. 45/ 30
1333. 337./ 214. 42./ 27. 45/ 30
1467. 432./ 276. 53./ 35. 45/ 30
1600. 529./ 341. 64./ 42. 45/ 30

B E A M N O. 28 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 106.87 KNS Vc= 63.88 KNS Vs= 78.61 KNS
Tu= 2.31 KN-MET Tc= 2.1 KN-MET Ts= 3.1 KN-MET LOAD 33
STIRRUPS ARE REQUIRED FOR SHEAR AND TORSION.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 123. MM C/C FOR 450. MM
ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 0.79 SQ.CM.

AT END SUPPORT - Vu= 7.31 KNS Vc= 70.81 KNS Vs= 0.00 KNS
Tu= 8.87 KN-MET Tc= 2.2 KN-MET Ts= 11.8 KN-MET LOAD 28
STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 10 MM 2-LEGGED STIRRUPS AT 123. MM C/C FOR 450. MM
ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 3.03 SQ.CM.

C:\Users\fierr\Desktop\Fierre\PROJECTS\PABLO GUTIERREZ\STAAD FILES\SUBSTRUCTURE\PG-SUBSTRUCTURE.anl Page 33 of 72

Saturday, February 03, 2024, 04:37 PM
STAAD SPACE -- PAGE NO. 34

_1008J__ 1600X 250X 400_1009J

| |
||=========================================================================||
| 4No16 H 352.| 0.TO 1600| | | | | | |
| 5*12c/c123 | | | | | 5*10c/c123 | |
| 2No16 H 48.| 0.TON1047H 48. 412.TO 1600 | | | | | |
||=========================================================================||
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________ _________
| | | | | | | | | | | |
| oooo | | oooo | | oooo | | oooo | | oooo | | oooo |
| 4#16 | | 4#16 | | 4#16 | | 4#16 | | 4#16 | | 4#16 |
| | | | | | | | | | | |
| 2#16 | | 2#16 | | 3#16 | | 3#16 | | 3#16 | | 3#16 |
| oo | | oo | | ooo | | ooo | | ooo | | ooo |
| | | | | | | | | | | |
|_________| |_________| |_________| |_________| |_________| |_________|

ACI 318-11 BEAM NO. 29 DESIGN RESULTS

=============================================

LEN - 3600. MM FY - 420. FC - 21. MPA, SIZE - 300. X 350. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 48. 2 - 16MM 0. 3600. YES YES

|----------------------------------------------------------------|
| CRITICAL POS MOMENT= 27.61 KN-MET AT 3300.MM, LOAD 45|
| REQD STEEL= 297.MM2, RHO=0.0033, RHOMX=0.0159 RHOMN=0.0033 |
| MAX/MIN/ACTUAL BAR SPACING= 275./ 41./ 188. MMS |
| REQD. DEVELOPMENT LENGTH = 530. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 23325.3 cm^4

2 302. 4 - 16MM 0. 1730. YES NO

|----------------------------------------------------------------|
| CRITICAL NEG MOMENT= 72.04 KN-MET AT 0.MM, LOAD 33|
| REQD STEEL= 694.MM2, RHO=0.0077, RHOMX=0.0159 RHOMN=0.0033 |
| MAX/MIN/ACTUAL BAR SPACING= 275./ 41./ 63. MMS |
| REQD. DEVELOPMENT LENGTH = 677. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 40259.6 cm^4

3 302. 2 - 16MM 2020. 3600. NO YES

C:\Users\fierr\Desktop\Fierre\PROJECTS\PABLO GUTIERREZ\STAAD FILES\SUBSTRUCTURE\PG-SUBSTRUCTURE.anl Page 34 of 72

Saturday, February 03, 2024, 04:37 PM
STAAD SPACE -- PAGE NO. 35

|----------------------------------------------------------------|
| CRITICAL NEG MOMENT= 41.66 KN-MET AT 3600.MM, LOAD 31|
| REQD STEEL= 384.MM2, RHO=0.0042, RHOMX=0.0159 RHOMN=0.0033 |
| MAX/MIN/ACTUAL BAR SPACING= 275./ 41./ 188. MMS |
| REQD. DEVELOPMENT LENGTH = 530. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 23325.3 cm^4

REQUIRED REINF. STEEL SUMMARY :

-------------------------------
SECTION REINF STEEL(+VE/-VE) MOMENTS(+VE/-VE) LOAD(+VE/-VE)
( MM ) (SQ. MM ) (KNS-MET )

0. 10./ 712. 1./ 72. 43/ 33

300. 59./ 502. 7./ 52. 43/ 33
600. 98./ 320. 11./ 34. 43/ 33
900. 135./ 177. 15./ 19. 31/ 45
1200. 164./ 67. 18./ 7. 31/ 45
1500. 171./ 0. 19./ 0. 31/ 0
1800. 168./ 0. 18./ 0. 16/ 0
2100. 201./ 0. 22./ 0. 33/ 0
2400. 236./ 0. 26./ 0. 33/ 0
2700. 250./ 52. 27./ 6. 33/ 43
3000. 250./ 138. 27./ 15. 45/ 31
3300. 256./ 257. 28./ 28. 45/ 31
3600. 252./ 393. 27./ 42. 45/ 31

B E A M N O. 29 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 43.53 KNS Vc= 69.88 KNS Vs= 0.00 KNS
Tu= 0.22 KN-MET Tc= 2.5 KN-MET Ts= 0.0 KN-MET LOAD 15
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 10 MM 2-LEGGED STIRRUPS AT 151. MM C/C FOR 1500. MM

AT END SUPPORT - Vu= 36.56 KNS Vc= 71.21 KNS Vs= 0.00 KNS
Tu= 0.22 KN-MET Tc= 2.5 KN-MET Ts= 0.0 KN-MET LOAD 15
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 10 MM 2-LEGGED STIRRUPS AT 151. MM C/C FOR 1500. MM

C:\Users\fierr\Desktop\Fierre\PROJECTS\PABLO GUTIERREZ\STAAD FILES\SUBSTRUCTURE\PG-SUBSTRUCTURE.anl Page 35 of 72

Saturday, February 03, 2024, 04:37 PM
STAAD SPACE -- PAGE NO. 36

_1013J__ 3600X 300X 350_1014J

| |
||=================================== =================================||
| 4No16 H 302.| 0.TO 1730| | | |2No16 H|302.2020.TO|3600 | | |
| 11*10c/c151 | | | | | | | | | | | 11*10c/c151 | |
| 2No16 H |48.| 0.TO 3600| | | | | | | | | | | | |
||=========================================================================||
| |
|___________________________________________________________________________|
_____________ _____________ _____________ _____________
| | | | | | | |
| oooo | | oooo | | oo | | oo |
| 4#16 | | 4#16 | | 2#16 | | 2#16 |
| | | | | | | |
| 2#16 | | 2#16 | | 2#16 | | 2#16 |
| oo | | oo | | oo | | oo |
| | | | | | | |
|_____________| |_____________| |_____________| |_____________|

ACI 318-11 BEAM NO. 30 DESIGN RESULTS

=============================================

LEN - 1725. MM FY - 420. FC - 21. MPA, SIZE - 250. X 400. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 48. 2 - 16MM 0. 1725. YES YES

|----------------------------------------------------------------|
| CRITICAL POS MOMENT= 40.42 KN-MET AT 1725.MM, LOAD 45|
| REQD STEEL= 317.MM2, RHO=0.0036, RHOMX=0.0159 RHOMN=0.0033 |
| MAX/MIN/ACTUAL BAR SPACING= 275./ 41./ 138. MMS |
| REQD. DEVELOPMENT LENGTH = 530. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 31521.3 cm^4

2 352. 2 - 16MM 0. 1264. YES NO

|----------------------------------------------------------------|
| CRITICAL NEG MOMENT= 33.00 KN-MET AT 0.MM, LOAD 33|
| REQD STEEL= 289.MM2, RHO=0.0033, RHOMX=0.0159 RHOMN=0.0033 |
| MAX/MIN/ACTUAL BAR SPACING= 275./ 41./ 138. MMS |
| REQD. DEVELOPMENT LENGTH = 530. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 31521.3 cm^4

3 352. 2 - 16MM 102. 1725. NO YES

C:\Users\fierr\Desktop\Fierre\PROJECTS\PABLO GUTIERREZ\STAAD FILES\SUBSTRUCTURE\PG-SUBSTRUCTURE.anl Page 36 of 72

Saturday, February 03, 2024, 04:37 PM
STAAD SPACE -- PAGE NO. 37

|----------------------------------------------------------------|
| CRITICAL NEG MOMENT= 21.54 KN-MET AT 1725.MM, LOAD 30|
| REQD STEEL= 220.MM2, RHO=0.0025, RHOMX=0.0159 RHOMN=0.0033 |
| MAX/MIN/ACTUAL BAR SPACING= 275./ 41./ 138. MMS |
| REQD. DEVELOPMENT LENGTH = 530. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 31521.3 cm^4

REQUIRED REINF. STEEL SUMMARY :

-------------------------------
SECTION REINF STEEL(+VE/-VE) MOMENTS(+VE/-VE) LOAD(+VE/-VE)
( MM ) (SQ. MM ) (KNS-MET )

0. 92./ 262. 12./ 33. 42/ 33

144. 80./ 199. 10./ 25. 42/ 33
288. 67./ 139. 9./ 18. 42/ 33
431. 53./ 83. 7./ 11. 30/ 45
575. 38./ 32. 5./ 4. 30/ 45
719. 26./ 0. 3./ 0. 26/ 0
863. 70./ 4. 9./ 1. 33/ 43
1006. 116./ 27. 15./ 3. 33/ 42
1150. 161./ 51. 21./ 7. 33/ 42
1294. 203./ 77. 26./ 10. 33/ 42
1438. 244./ 105. 31./ 14. 33/ 42
1581. 284./ 135. 36./ 17. 33/ 42
1725. 324./ 169. 40./ 22. 45/ 30

B E A M N O. 30 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 11.03 KNS Vc= 117.47 KNS Vs= 0.00 KNS
Tu= 3.36 KN-MET Tc= 2.2 KN-MET Ts= 4.5 KN-MET LOAD 15
STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 10 MM 2-LEGGED STIRRUPS AT 123. MM C/C FOR 513. MM
ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 1.15 SQ.CM.

AT END SUPPORT - Vu= 6.81 KNS Vc= 69.98 KNS Vs= 0.00 KNS
Tu= 3.36 KN-MET Tc= 2.2 KN-MET Ts= 4.5 KN-MET LOAD 15
STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 10 MM 2-LEGGED STIRRUPS AT 123. MM C/C FOR 513. MM
ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 1.15 SQ.CM.

C:\Users\fierr\Desktop\Fierre\PROJECTS\PABLO GUTIERREZ\STAAD FILES\SUBSTRUCTURE\PG-SUBSTRUCTURE.anl Page 37 of 72

Saturday, February 03, 2024, 04:37 PM
STAAD SPACE -- PAGE NO. 38

_1010J__ 1725X 250X 400_1011J

| |
||=========================================================================||
| 2No16oH6352.52.0.TO.1264725 | | | | | | | |
| 6*10c/c123 | | | | | | | 6*10c/c123 | |
| 2No16 H 48.| 0.TO 1725| | | | | | | | |
||=========================================================================||
| |
|___________________________________________________________________________|
_________ _________ _________ _________
| | | | | | | |
| oo | | oo | | oo | | oo |
| 2#16 | | 2#16 | | 2#16 | | 2#16 |
| | | | | | | |
| 2#16 | | 2#16 | | 2#16 | | 2#16 |
| oo | | oo | | oo | | oo |
| | | | | | | |
|_________| |_________| |_________| |_________|

ACI 318-11 BEAM NO. 31 DESIGN RESULTS

=============================================

LEN - 1650. MM FY - 420. FC - 21. MPA, SIZE - 300. X 350. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 48. 2 - 16MM 0. 1163. YES NO

|----------------------------------------------------------------|
| CRITICAL POS MOMENT= 21.45 KN-MET AT 0.MM, LOAD 43|
| REQD STEEL= 256.MM2, RHO=0.0028, RHOMX=0.0159 RHOMN=0.0033 |
| MAX/MIN/ACTUAL BAR SPACING= 275./ 41./ 188. MMS |
| REQD. DEVELOPMENT LENGTH = 530. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 23325.3 cm^4

2 48. 3 - 16MM 677. 1650. NO YES

|----------------------------------------------------------------|
| CRITICAL POS MOMENT= 43.66 KN-MET AT 1650.MM, LOAD 45|
| REQD STEEL= 404.MM2, RHO=0.0045, RHOMX=0.0159 RHOMN=0.0033 |
| MAX/MIN/ACTUAL BAR SPACING= 275./ 41./ 94. MMS |
| REQD. DEVELOPMENT LENGTH = 530. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 32283.4 cm^4

3 302. 4 - 16MM 0. 1650. YES YES

C:\Users\fierr\Desktop\Fierre\PROJECTS\PABLO GUTIERREZ\STAAD FILES\SUBSTRUCTURE\PG-SUBSTRUCTURE.anl Page 38 of 72

Saturday, February 03, 2024, 04:37 PM
STAAD SPACE -- PAGE NO. 39

|----------------------------------------------------------------|
| CRITICAL NEG MOMENT= 72.34 KN-MET AT 0.MM, LOAD 33|
| REQD STEEL= 697.MM2, RHO=0.0077, RHOMX=0.0159 RHOMN=0.0033 |
| MAX/MIN/ACTUAL BAR SPACING= 275./ 41./ 63. MMS |
| REQD. DEVELOPMENT LENGTH = 677. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 40259.6 cm^4

REQUIRED REINF. STEEL SUMMARY :

-------------------------------
SECTION REINF STEEL(+VE/-VE) MOMENTS(+VE/-VE) LOAD(+VE/-VE)
( MM ) (SQ. MM ) (KNS-MET )

0. 197./ 715. 21./ 72. 43/ 33

138. 170./ 601. 19./ 62. 43/ 33
275. 142./ 491. 16./ 51. 43/ 33
413. 114./ 387. 13./ 41. 43/ 33
550. 84./ 287. 9./ 31. 43/ 33
688. 53./ 193. 6./ 21. 43/ 33
825. 21./ 103. 2./ 11. 43/ 33
963. 0./ 20. 0./ 2. 0/ 24
1100. 71./ 50. 8./ 6. 45/ 31
1238. 154./ 85. 17./ 9. 45/ 31
1375. 239./ 121. 26./ 13. 45/ 31
1513. 325./ 158. 35./ 17. 45/ 31
1650. 413./ 196. 44./ 21. 45/ 31

B E A M N O. 31 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 75.38 KNS Vc= 65.76 KNS Vs= 34.74 KNS
Tu= 0.59 KN-MET Tc= 2.3 KN-MET Ts= 0.0 KN-MET LOAD 33
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT IS REQUIRED FOR SHEAR.
PROVIDE 10 MM 2-LEGGED STIRRUPS AT 151. MM C/C FOR 525. MM

AT END SUPPORT - Vu= 26.70 KNS Vc= 70.61 KNS Vs= 0.00 KNS
Tu= 0.52 KN-MET Tc= 2.5 KN-MET Ts= 0.0 KN-MET LOAD 30
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 10 MM 2-LEGGED STIRRUPS AT 151. MM C/C FOR 525. MM

C:\Users\fierr\Desktop\Fierre\PROJECTS\PABLO GUTIERREZ\STAAD FILES\SUBSTRUCTURE\PG-SUBSTRUCTURE.anl Page 39 of 72

Saturday, February 03, 2024, 04:37 PM
STAAD SPACE -- PAGE NO. 40

_1014J__ 1650X 300X 350_1015J

| |
||=========================================================================||
| 4No16 H|302. |0.TO 1650 | | | | | | |
| 5*10c/c151 | | | | | | 5*10c/c151 | |
| 2No16 H| 48. |0.TO 1163 | 3No16 H 48. 677.TO 1650 | | | |
||=========================================================================||
| |
|___________________________________________________________________________|
_____________ _____________ _____________ _____________
| | | | | | | |
| oooo | | oooo | | oooo | | oooo |
| 4#16 | | 4#16 | | 4#16 | | 4#16 |
| | | | | | | |
| 2#16 | | 2#16 | | 3#16 | | 3#16 |
| oo | | oo | | ooo | | ooo |
| | | | | | | |
|_____________| |_____________| |_____________| |_____________|

ACI 318-11 BEAM NO. 34 DESIGN RESULTS

=============================================

LEN - 1725. MM FY - 420. FC - 21. MPA, SIZE - 250. X 400. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 48. 2 - 16MM 0. 490. YES NO

|----------------------------------------------------------------|
| CRITICAL POS MOMENT= 4.44 KN-MET AT 0.MM, LOAD 39|
| REQD STEEL= 45.MM2, RHO=0.0005, RHOMX=0.0159 RHOMN=0.0033 |
| MAX/MIN/ACTUAL BAR SPACING= 275./ 41./ 138. MMS |
| REQD. DEVELOPMENT LENGTH = 530. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 31521.3 cm^4

2 48. 2 - 16MM 646. 1725. NO YES

|----------------------------------------------------------------|
| CRITICAL POS MOMENT= 21.43 KN-MET AT 1725.MM, LOAD 41|
| REQD STEEL= 219.MM2, RHO=0.0025, RHOMX=0.0159 RHOMN=0.0033 |
| MAX/MIN/ACTUAL BAR SPACING= 275./ 41./ 138. MMS |
| REQD. DEVELOPMENT LENGTH = 530. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 31521.3 cm^4

3 352. 2 - 16MM 0. 1725. YES YES

C:\Users\fierr\Desktop\Fierre\PROJECTS\PABLO GUTIERREZ\STAAD FILES\SUBSTRUCTURE\PG-SUBSTRUCTURE.anl Page 40 of 72

Saturday, February 03, 2024, 04:37 PM
STAAD SPACE -- PAGE NO. 41

|----------------------------------------------------------------|
| CRITICAL NEG MOMENT= 45.06 KN-MET AT 0.MM, LOAD 29|
| REQD STEEL= 356.MM2, RHO=0.0040, RHOMX=0.0159 RHOMN=0.0033 |
| MAX/MIN/ACTUAL BAR SPACING= 275./ 41./ 138. MMS |
| REQD. DEVELOPMENT LENGTH = 530. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 31521.3 cm^4

REQUIRED REINF. STEEL SUMMARY :

-------------------------------
SECTION REINF STEEL(+VE/-VE) MOMENTS(+VE/-VE) LOAD(+VE/-VE)
( MM ) (SQ. MM ) (KNS-MET )

0. 34./ 363. 4./ 45. 39/ 29

144. 26./ 303. 3./ 38. 39/ 29
287. 16./ 246. 2./ 31. 39/ 29
431. 4./ 192. 1./ 24. 39/ 29
575. 0./ 141. 0./ 18. 0/ 29
719. 0./ 95. 0./ 12. 0/ 47
862. 0./ 75. 0./ 10. 0/ 47
1006. 7./ 77. 1./ 10. 40/ 26
1150. 42./ 94. 5./ 12. 41/ 27
1294. 75./ 114. 10./ 15. 41/ 27
1437. 107./ 136. 14./ 17. 41/ 27
1581. 138./ 160. 18./ 20. 41/ 27
1725. 168./ 186. 21./ 24. 41/ 27

B E A M N O. 34 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 22.95 KNS Vc= 66.79 KNS Vs= 0.00 KNS
Tu= 3.88 KN-MET Tc= 2.2 KN-MET Ts= 5.2 KN-MET LOAD 15
STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 10 MM 2-LEGGED STIRRUPS AT 123. MM C/C FOR 512. MM
ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 1.32 SQ.CM.

AT END SUPPORT - Vu= 5.11 KNS Vc= 66.79 KNS Vs= 0.00 KNS
Tu= 3.88 KN-MET Tc= 2.2 KN-MET Ts= 5.2 KN-MET LOAD 15
STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 10 MM 2-LEGGED STIRRUPS AT 123. MM C/C FOR 512. MM
ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 1.32 SQ.CM.

C:\Users\fierr\Desktop\Fierre\PROJECTS\PABLO GUTIERREZ\STAAD FILES\SUBSTRUCTURE\PG-SUBSTRUCTURE.anl Page 41 of 72

Saturday, February 03, 2024, 04:37 PM
STAAD SPACE -- PAGE NO. 42

_1013J__ 1724X 250X 400_1016J

| |
||=========================================================================||
| 2No16 H 352.| 0.TO 1725 | | | | | | | |
| 6*10c/c123 | | | | | | 6*10c/c123 | |
| 2No16 H 48.| 0.TO 490 2No16 H 48. 646.TO 1725 | | | | |
||==================== ===============================================||
| |
|___________________________________________________________________________|
_________ _________ _________ _________
| | | | | | | |
| oo | | oo | | oo | | oo |
| 2#16 | | 2#16 | | 2#16 | | 2#16 |
| | | | | | | |
| 2#16 | | | | 2#16 | | 2#16 |
| oo | | | | oo | | oo |
| | | | | | | |
|_________| |_________| |_________| |_________|

ACI 318-11 BEAM NO. 35 DESIGN RESULTS

=============================================

LEN - 1725. MM FY - 420. FC - 21. MPA, SIZE - 250. X 400. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 48. 2 - 16MM 0. 158. YES NO

|----------------------------------------------------------------|
| CRITICAL POS MOMENT= 1.09 KN-MET AT 0.MM, LOAD 38|
| REQD STEEL= 11.MM2, RHO=0.0001, RHOMX=0.0159 RHOMN=0.0033 |
| MAX/MIN/ACTUAL BAR SPACING= 275./ 41./ 138. MMS |
| REQD. DEVELOPMENT LENGTH = 530. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 31521.3 cm^4

2 48. 2 - 16MM 668. 1725. NO YES

|----------------------------------------------------------------|
| CRITICAL POS MOMENT= 19.81 KN-MET AT 1725.MM, LOAD 40|
| REQD STEEL= 202.MM2, RHO=0.0023, RHOMX=0.0159 RHOMN=0.0033 |
| MAX/MIN/ACTUAL BAR SPACING= 275./ 41./ 138. MMS |
| REQD. DEVELOPMENT LENGTH = 530. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 31521.3 cm^4

3 352. 2 - 16MM 0. 1725. YES YES

C:\Users\fierr\Desktop\Fierre\PROJECTS\PABLO GUTIERREZ\STAAD FILES\SUBSTRUCTURE\PG-SUBSTRUCTURE.anl Page 42 of 72

Saturday, February 03, 2024, 04:37 PM
STAAD SPACE -- PAGE NO. 43

|----------------------------------------------------------------|
| CRITICAL NEG MOMENT= 38.15 KN-MET AT 0.MM, LOAD 28|
| REQD STEEL= 299.MM2, RHO=0.0034, RHOMX=0.0159 RHOMN=0.0033 |
| MAX/MIN/ACTUAL BAR SPACING= 275./ 41./ 138. MMS |
| REQD. DEVELOPMENT LENGTH = 530. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 31521.3 cm^4

REQUIRED REINF. STEEL SUMMARY :

-------------------------------
SECTION REINF STEEL(+VE/-VE) MOMENTS(+VE/-VE) LOAD(+VE/-VE)
( MM ) (SQ. MM ) (KNS-MET )

0. 8./ 305. 1./ 38. 38/ 28

144. 0./ 257. 0./ 32. 38/ 28
287. 0./ 211. 0./ 27. 0/ 28
431. 0./ 166. 0./ 21. 0/ 28
575. 0./ 124. 0./ 16. 0/ 28
719. 0./ 84. 0./ 11. 0/ 28
862. 0./ 73. 0./ 9. 0/ 26
1006. 4./ 84. 1./ 11. 40/ 26
1150. 35./ 98. 5./ 13. 40/ 26
1294. 65./ 112. 8./ 14. 40/ 26
1437. 95./ 127. 12./ 16. 40/ 26
1581. 125./ 143. 16./ 18. 40/ 26
1725. 155./ 160. 20./ 20. 40/ 26

B E A M N O. 35 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 18.85 KNS Vc= 66.40 KNS Vs= 0.00 KNS
Tu= 4.97 KN-MET Tc= 2.2 KN-MET Ts= 6.6 KN-MET LOAD 33
STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 10 MM 2-LEGGED STIRRUPS AT 123. MM C/C FOR 512. MM
ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 1.70 SQ.CM.

AT END SUPPORT - Vu= 9.47 KNS Vc= 66.40 KNS Vs= 0.00 KNS
Tu= 4.97 KN-MET Tc= 2.2 KN-MET Ts= 6.6 KN-MET LOAD 33
STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 10 MM 2-LEGGED STIRRUPS AT 123. MM C/C FOR 512. MM
ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 1.70 SQ.CM.

C:\Users\fierr\Desktop\Fierre\PROJECTS\PABLO GUTIERREZ\STAAD FILES\SUBSTRUCTURE\PG-SUBSTRUCTURE.anl Page 43 of 72

Saturday, February 03, 2024, 04:37 PM
STAAD SPACE -- PAGE NO. 44

_1014J__ 1724X 250X 400_1017J

| |
||=========================================================================||
| 2No16 H 352. 0.TO 1725 | | | | | | | |
| 6*10c/c123 | | | | 6*10c/c123 | |
| 2No16 H 48. 0.TO 158 2No16 H 48. 668.TO 1725 | | | | |
||===== ==============================================||
| |
|___________________________________________________________________________|
_________ _________ _________ _________
| | | | | | | |
| oo | | oo | | oo | | oo |
| 2#16 | | 2#16 | | 2#16 | | 2#16 |
| | | | | | | |
| 2#16 | | | | 2#16 | | 2#16 |
| oo | | | | oo | | oo |
| | | | | | | |
|_________| |_________| |_________| |_________|

ACI 318-11 BEAM NO. 36 DESIGN RESULTS

=============================================

LEN - 1700. MM FY - 420. FC - 21. MPA, SIZE - 300. X 350. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 48. 2 - 16MM 642. 1700. NO YES

|----------------------------------------------------------------|
| CRITICAL POS MOMENT= 17.80 KN-MET AT 1700.MM, LOAD 40|
| REQD STEEL= 212.MM2, RHO=0.0023, RHOMX=0.0159 RHOMN=0.0033 |
| MAX/MIN/ACTUAL BAR SPACING= 275./ 41./ 188. MMS |
| REQD. DEVELOPMENT LENGTH = 530. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 23325.3 cm^4

2 302. 2 - 16MM 0. 1700. YES YES

|----------------------------------------------------------------|
| CRITICAL NEG MOMENT= 31.00 KN-MET AT 0.MM, LOAD 28|
| REQD STEEL= 297.MM2, RHO=0.0033, RHOMX=0.0159 RHOMN=0.0033 |
| MAX/MIN/ACTUAL BAR SPACING= 275./ 41./ 188. MMS |
| REQD. DEVELOPMENT LENGTH = 530. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 23325.3 cm^4

C:\Users\fierr\Desktop\Fierre\PROJECTS\PABLO GUTIERREZ\STAAD FILES\SUBSTRUCTURE\PG-SUBSTRUCTURE.anl Page 44 of 72

Saturday, February 03, 2024, 04:37 PM
STAAD SPACE -- PAGE NO. 45

REQUIRED REINF. STEEL SUMMARY :

-------------------------------
SECTION REINF STEEL(+VE/-VE) MOMENTS(+VE/-VE) LOAD(+VE/-VE)
( MM ) (SQ. MM ) (KNS-MET )

0. 0./ 288. 0./ 31. 0/ 28

142. 0./ 234. 0./ 25. 0/ 28
283. 0./ 183. 0./ 20. 0/ 28
425. 0./ 135. 0./ 15. 0/ 28
567. 0./ 91. 0./ 10. 0/ 28
708. 0./ 62. 0./ 7. 0/ 46
850. 0./ 66. 0./ 7. 0/ 26
992. 30./ 77. 3./ 8. 40/ 26
1133. 60./ 91. 7./ 10. 40/ 26
1275. 88./ 107. 10./ 12. 40/ 26
1417. 114./ 126. 13./ 14. 40/ 26
1558. 139./ 147. 15./ 16. 40/ 26
1700. 163./ 171. 18./ 19. 40/ 26

B E A M N O. 36 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 28.86 KNS Vc= 67.51 KNS Vs= 0.00 KNS
Tu= 0.17 KN-MET Tc= 2.4 KN-MET Ts= 0.0 KN-MET LOAD 23
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 10 MM 2-LEGGED STIRRUPS AT 151. MM C/C FOR 550. MM

AT END SUPPORT - Vu= 3.15 KNS Vc= 70.77 KNS Vs= 0.00 KNS
Tu= 0.01 KN-MET Tc= 2.4 KN-MET Ts= 0.0 KN-MET LOAD 15
STIRRUPS ARE NOT REQUIRED.

_1015J__ 1699X 300X 350_1018J

| |
||=========================================================================||
| 2No16 H 302. 0.TO 1700 | |
| 5*10c/c151 | |
| 2No16 H 48. 642.TO 1700 |
| ===============================================||
| |
|___________________________________________________________________________|
_____________ _____________ _____________ _____________
| | | | | | | |
| oo | | oo | | oo | | oo |
| 2#16 | | 2#16 | | 2#16 | | 2#16 |
| | | | | | | |
| | | | | 2#16 | | 2#16 |
| | | | | oo | | oo |
| | | | | | | |
|_____________| |_____________| |_____________| |_____________|

C:\Users\fierr\Desktop\Fierre\PROJECTS\PABLO GUTIERREZ\STAAD FILES\SUBSTRUCTURE\PG-SUBSTRUCTURE.anl Page 45 of 72

Saturday, February 03, 2024, 04:37 PM
STAAD SPACE -- PAGE NO. 46

ACI 318-11 BEAM NO. 40 DESIGN RESULTS

=============================================

LEN - 3700. MM FY - 420. FC - 21. MPA, SIZE - 300. X 350. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 48. 2 - 16MM 0. 3700. YES YES

|----------------------------------------------------------------|
| CRITICAL POS MOMENT= 19.88 KN-MET AT 1233.MM, LOAD 31|
| REQD STEEL= 237.MM2, RHO=0.0026, RHOMX=0.0159 RHOMN=0.0033 |
| MAX/MIN/ACTUAL BAR SPACING= 275./ 41./ 188. MMS |
| REQD. DEVELOPMENT LENGTH = 530. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 23325.3 cm^4

2 302. 2 - 16MM 0. 1763. YES NO

|----------------------------------------------------------------|
| CRITICAL NEG MOMENT= 39.77 KN-MET AT 0.MM, LOAD 33|
| REQD STEEL= 366.MM2, RHO=0.0040, RHOMX=0.0159 RHOMN=0.0033 |
| MAX/MIN/ACTUAL BAR SPACING= 275./ 41./ 188. MMS |
| REQD. DEVELOPMENT LENGTH = 530. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 23325.3 cm^4

3 302. 2 - 16MM 2091. 3700. NO YES

|----------------------------------------------------------------|
| CRITICAL NEG MOMENT= 28.20 KN-MET AT 3700.MM, LOAD 31|
| REQD STEEL= 297.MM2, RHO=0.0033, RHOMX=0.0159 RHOMN=0.0033 |
| MAX/MIN/ACTUAL BAR SPACING= 275./ 41./ 188. MMS |
| REQD. DEVELOPMENT LENGTH = 530. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 23325.3 cm^4

REQUIRED REINF. STEEL SUMMARY :

-------------------------------
SECTION REINF STEEL(+VE/-VE) MOMENTS(+VE/-VE) LOAD(+VE/-VE)
( MM ) (SQ. MM ) (KNS-MET )

0. 84./ 374. 9./ 40. 43/ 33

308. 115./ 260. 13./ 28. 43/ 33
617. 150./ 173. 16./ 19. 31/ 45
925. 174./ 101. 19./ 11. 31/ 45
1233. 182./ 40. 20./ 4. 31/ 45
1542. 176./ 0. 19./ 0. 31/ 0
1850. 155./ 0. 17./ 0. 31/ 0
2158. 134./ 0. 15./ 0. 15/ 0

C:\Users\fierr\Desktop\Fierre\PROJECTS\PABLO GUTIERREZ\STAAD FILES\SUBSTRUCTURE\PG-SUBSTRUCTURE.anl Page 46 of 72

Saturday, February 03, 2024, 04:37 PM
STAAD SPACE -- PAGE NO. 47

2467. 115./ 0. 13./ 0. 33/ 0

2775. 111./ 3. 12./ 0. 33/ 43
3083. 97./ 68. 11./ 8. 45/ 31
3392. 84./ 158. 9./ 17. 45/ 31
3700. 64./ 261. 7./ 28. 45/ 31

B E A M N O. 40 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 26.62 KNS Vc= 68.98 KNS Vs= 0.00 KNS
Tu= 0.17 KN-MET Tc= 2.5 KN-MET Ts= 0.0 KN-MET LOAD 25
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 10 MM 2-LEGGED STIRRUPS AT 151. MM C/C FOR 1550. MM

AT END SUPPORT - Vu= 31.34 KNS Vc= 69.32 KNS Vs= 0.00 KNS
Tu= 0.33 KN-MET Tc= 2.5 KN-MET Ts= 0.0 KN-MET LOAD 15
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 10 MM 2-LEGGED STIRRUPS AT 151. MM C/C FOR 1550. MM

_1016J__ 3700X 300X 350_1017J

| |
||=================================== =================================||
| 2No16 H 302.| 0.TO 1763| | | |2No16 H|302.2091.TO|3700 | | |
| 12*10c/c151 | | | | | | | | | | | 12*10c/c151 | |
| 2No16 H |48.| 0.TO 3700| | | | | | | | | | | | |
||=========================================================================||
| |
|___________________________________________________________________________|
_____________ _____________ _____________ _____________
| | | | | | | |
| oo | | oo | | oo | | oo |
| 2#16 | | 2#16 | | 2#16 | | 2#16 |
| | | | | | | |
| 2#16 | | 2#16 | | 2#16 | | 2#16 |
| oo | | oo | | oo | | oo |
| | | | | | | |
|_____________| |_____________| |_____________| |_____________|

C:\Users\fierr\Desktop\Fierre\PROJECTS\PABLO GUTIERREZ\STAAD FILES\SUBSTRUCTURE\PG-SUBSTRUCTURE.anl Page 47 of 72

Saturday, February 03, 2024, 04:37 PM
STAAD SPACE -- PAGE NO. 48

ACI 318-11 BEAM NO. 41 DESIGN RESULTS

=============================================

LEN - 1700. MM FY - 420. FC - 21. MPA, SIZE - 300. X 350. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 48. 2 - 16MM 0. 298. YES NO

|----------------------------------------------------------------|
| CRITICAL POS MOMENT= 0.92 KN-MET AT 0.MM, LOAD 43|
| REQD STEEL= 11.MM2, RHO=0.0001, RHOMX=0.0159 RHOMN=0.0033 |
| MAX/MIN/ACTUAL BAR SPACING= 275./ 41./ 188. MMS |
| REQD. DEVELOPMENT LENGTH = 530. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 23325.3 cm^4

2 48. 2 - 16MM 353. 1700. NO YES

|----------------------------------------------------------------|
| CRITICAL POS MOMENT= 35.40 KN-MET AT 1700.MM, LOAD 45|
| REQD STEEL= 324.MM2, RHO=0.0036, RHOMX=0.0159 RHOMN=0.0033 |
| MAX/MIN/ACTUAL BAR SPACING= 275./ 41./ 188. MMS |
| REQD. DEVELOPMENT LENGTH = 530. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 23325.3 cm^4

3 302. 2 - 16MM 0. 1700. YES YES

|----------------------------------------------------------------|
| CRITICAL NEG MOMENT= 40.10 KN-MET AT 0.MM, LOAD 33|
| REQD STEEL= 369.MM2, RHO=0.0041, RHOMX=0.0159 RHOMN=0.0033 |
| MAX/MIN/ACTUAL BAR SPACING= 275./ 41./ 188. MMS |
| REQD. DEVELOPMENT LENGTH = 530. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 23325.3 cm^4

REQUIRED REINF. STEEL SUMMARY :

-------------------------------
SECTION REINF STEEL(+VE/-VE) MOMENTS(+VE/-VE) LOAD(+VE/-VE)
( MM ) (SQ. MM ) (KNS-MET )

0. 8./ 378. 1./ 40. 43/ 33

142. 6./ 300. 1./ 32. 43/ 33
283. 2./ 226. 0./ 25. 43/ 33
425. 0./ 157. 0./ 17. 0/ 33
567. 0./ 92. 0./ 10. 0/ 33
708. 0./ 35. 0./ 4. 0/ 46
850. 32./ 39. 4./ 4. 45/ 31
992. 85./ 52. 9./ 6. 45/ 31
1133. 136./ 67. 15./ 7. 45/ 31
1275. 187./ 85. 20./ 9. 33/ 43
1417. 237./ 106. 26./ 12. 33/ 43
1558. 285./ 129. 31./ 14. 33/ 43
1700. 331./ 153. 35./ 17. 45/ 31

B E A M N O. 41 D E S I G N R E S U L T S - SHEAR

C:\Users\fierr\Desktop\Fierre\PROJECTS\PABLO GUTIERREZ\STAAD FILES\SUBSTRUCTURE\PG-SUBSTRUCTURE.anl Page 48 of 72

Saturday, February 03, 2024, 04:37 PM
STAAD SPACE -- PAGE NO. 49

AT START SUPPORT - Vu= 29.04 KNS Vc= 69.11 KNS Vs= 0.00 KNS
Tu= 0.16 KN-MET Tc= 2.4 KN-MET Ts= 0.0 KN-MET LOAD 25
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 10 MM 2-LEGGED STIRRUPS AT 151. MM C/C FOR 550. MM

AT END SUPPORT - Vu= 36.28 KNS Vc= 67.96 KNS Vs= 0.00 KNS
Tu= 0.18 KN-MET Tc= 2.4 KN-MET Ts= 0.0 KN-MET LOAD 33
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 10 MM 2-LEGGED STIRRUPS AT 151. MM C/C FOR 550. MM

_1017J__ 1700X 300X 350_1018J

| |
||=========================================================================||
| 2No16 H|302. |0.TO 1700 | | | | | | |
| 5*10c/c151 | | | | | | 5*10c/c151 | |
| 2No16 H| 48. 20.TO H2988. 353.TO 1700 | | | | | |
||============ ============================================================||
| |
|___________________________________________________________________________|
_____________ _____________ _____________ _____________
| | | | | | | |
| oo | | oo | | oo | | oo |
| 2#16 | | 2#16 | | 2#16 | | 2#16 |
| | | | | | | |
| 2#16 | | 2#16 | | 2#16 | | 2#16 |
| oo | | oo | | oo | | oo |
| | | | | | | |
|_____________| |_____________| |_____________| |_____________|

ACI 318-11 BEAM NO. 42 DESIGN RESULTS

=============================================

LEN - 4200. MM FY - 420. FC - 21. MPA, SIZE - 300. X 350. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 48. 2 - 16MM 0. 3880. YES NO

|----------------------------------------------------------------|
| CRITICAL POS MOMENT= 24.04 KN-MET AT 1400.MM, LOAD 26|
| REQD STEEL= 288.MM2, RHO=0.0032, RHOMX=0.0159 RHOMN=0.0033 |
| MAX/MIN/ACTUAL BAR SPACING= 275./ 41./ 188. MMS |
| REQD. DEVELOPMENT LENGTH = 530. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 23325.3 cm^4

C:\Users\fierr\Desktop\Fierre\PROJECTS\PABLO GUTIERREZ\STAAD FILES\SUBSTRUCTURE\PG-SUBSTRUCTURE.anl Page 49 of 72

Saturday, February 03, 2024, 04:37 PM
STAAD SPACE -- PAGE NO. 50

2 302. 2 - 16MM 0. 1230. YES NO

|----------------------------------------------------------------|
| CRITICAL NEG MOMENT= 25.12 KN-MET AT 0.MM, LOAD 28|
| REQD STEEL= 297.MM2, RHO=0.0033, RHOMX=0.0159 RHOMN=0.0033 |
| MAX/MIN/ACTUAL BAR SPACING= 275./ 41./ 188. MMS |
| REQD. DEVELOPMENT LENGTH = 530. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 23325.3 cm^4

3 302. 2 - 16MM 2795. 4200. NO YES

|----------------------------------------------------------------|
| CRITICAL NEG MOMENT= 33.67 KN-MET AT 4200.MM, LOAD 26|
| REQD STEEL= 307.MM2, RHO=0.0034, RHOMX=0.0159 RHOMN=0.0033 |
| MAX/MIN/ACTUAL BAR SPACING= 275./ 41./ 188. MMS |
| REQD. DEVELOPMENT LENGTH = 530. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 23325.3 cm^4

REQUIRED REINF. STEEL SUMMARY :

-------------------------------
SECTION REINF STEEL(+VE/-VE) MOMENTS(+VE/-VE) LOAD(+VE/-VE)
( MM ) (SQ. MM ) (KNS-MET )

0. 71./ 232. 8./ 25. 38/ 28

350. 117./ 124. 13./ 14. 38/ 28
700. 170./ 51. 19./ 6. 26/ 40
1050. 205./ 0. 22./ 0. 26/ 0
1400. 222./ 0. 24./ 0. 26/ 0
1750. 219./ 0. 24./ 0. 26/ 0
2100. 199./ 0. 22./ 0. 15/ 0
2450. 174./ 0. 19./ 0. 15/ 0
2800. 127./ 0. 14./ 0. 15/ 0
3150. 81./ 0. 9./ 0. 28/ 0
3500. 31./ 72. 3./ 8. 40/ 26
3850. 0./ 184. 0./ 20. 0/ 26
4200. 0./ 314. 0./ 34. 0/ 26

B E A M N O. 42 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 28.55 KNS Vc= 70.86 KNS Vs= 0.00 KNS
Tu= 0.39 KN-MET Tc= 2.5 KN-MET Ts= 0.0 KN-MET LOAD 23
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 10 MM 2-LEGGED STIRRUPS AT 151. MM C/C FOR 1800. MM

C:\Users\fierr\Desktop\Fierre\PROJECTS\PABLO GUTIERREZ\STAAD FILES\SUBSTRUCTURE\PG-SUBSTRUCTURE.anl Page 50 of 72

Saturday, February 03, 2024, 04:37 PM
STAAD SPACE -- PAGE NO. 51

AT END SUPPORT - Vu= 36.72 KNS Vc= 69.19 KNS Vs= 0.00 KNS
Tu= 0.50 KN-MET Tc= 2.5 KN-MET Ts= 0.0 KN-MET LOAD 15
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 10 MM 2-LEGGED STIRRUPS AT 151. MM C/C FOR 1800. MM

_1011J__ 4200X 300X 350_1015J

| |
||===================== =========================||
| 2No16 H 302.| 0.TO 1230 |2No16|H 302.2795.TO 4200 |
| 13*10c/c151 | | | | | | | 13*10c/c151 |
| 2No16 H 48.| 0.TO 3880 | | | | | | | |
||===================================================================== |
| |
|___________________________________________________________________________|
_____________ _____________ _____________ _____________
| | | | | | | |
| oo | | | | oo | | oo |
| 2#16 | | | | 2#16 | | 2#16 |
| | | | | | | |
| 2#16 | | 2#16 | | 2#16 | | |
| oo | | oo | | oo | | |
| | | | | | | |
|_____________| |_____________| |_____________| |_____________|

ACI 318-11 BEAM NO. 43 DESIGN RESULTS

=============================================

LEN - 1675. MM FY - 420. FC - 21. MPA, SIZE - 250. X 400. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 48. 2 - 16MM 0. 1675. YES YES

|----------------------------------------------------------------|
| CRITICAL POS MOMENT= 34.00 KN-MET AT 1675.MM, LOAD 45|
| REQD STEEL= 289.MM2, RHO=0.0033, RHOMX=0.0159 RHOMN=0.0033 |
| MAX/MIN/ACTUAL BAR SPACING= 275./ 41./ 138. MMS |
| REQD. DEVELOPMENT LENGTH = 530. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 31521.3 cm^4

2 352. 3 - 16MM 0. 1526. YES NO

|----------------------------------------------------------------|
| CRITICAL NEG MOMENT= 55.72 KN-MET AT 0.MM, LOAD 33|
| REQD STEEL= 445.MM2, RHO=0.0051, RHOMX=0.0159 RHOMN=0.0033 |
| MAX/MIN/ACTUAL BAR SPACING= 275./ 41./ 69. MMS |
| REQD. DEVELOPMENT LENGTH = 615. MMS |
|----------------------------------------------------------------|

C:\Users\fierr\Desktop\Fierre\PROJECTS\PABLO GUTIERREZ\STAAD FILES\SUBSTRUCTURE\PG-SUBSTRUCTURE.anl Page 51 of 72

Saturday, February 03, 2024, 04:37 PM
STAAD SPACE -- PAGE NO. 52

Cracked Moment of Inertia Iz at above location = 43579.4 cm^4

3 352. 2 - 16MM 358. 1675. NO YES

|----------------------------------------------------------------|
| CRITICAL NEG MOMENT= 19.10 KN-MET AT 1675.MM, LOAD 30|
| REQD STEEL= 195.MM2, RHO=0.0022, RHOMX=0.0159 RHOMN=0.0033 |
| MAX/MIN/ACTUAL BAR SPACING= 275./ 41./ 138. MMS |
| REQD. DEVELOPMENT LENGTH = 530. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 31521.3 cm^4

REQUIRED REINF. STEEL SUMMARY :

-------------------------------
SECTION REINF STEEL(+VE/-VE) MOMENTS(+VE/-VE) LOAD(+VE/-VE)
( MM ) (SQ. MM ) (KNS-MET )

0. 161./ 455. 21./ 56. 42/ 33

140. 149./ 367. 19./ 46. 42/ 33
279. 134./ 287. 17./ 36. 42/ 33
419. 120./ 217. 15./ 28. 30/ 45
558. 103./ 153. 13./ 20. 30/ 45
698. 81./ 93. 11./ 12. 30/ 45
838. 57./ 36. 7./ 5. 30/ 45
977. 34./ 0. 4./ 0. 16/ 0
1117. 78./ 10. 10./ 1. 33/ 42
1256. 128./ 41. 16./ 5. 33/ 42
1396. 175./ 75. 22./ 10. 33/ 42
1535. 222./ 110. 28./ 14. 33/ 42
1675. 270./ 149. 34./ 19. 45/ 30

B E A M N O. 43 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 11.63 KNS Vc= 87.39 KNS Vs= 0.00 KNS
Tu= 6.39 KN-MET Tc= 2.2 KN-MET Ts= 8.5 KN-MET LOAD 28
STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 10 MM 2-LEGGED STIRRUPS AT 123. MM C/C FOR 488. MM
ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 2.18 SQ.CM.

AT END SUPPORT - Vu= 9.50 KNS Vc= 91.59 KNS Vs= 0.00 KNS
Tu= 6.39 KN-MET Tc= 2.2 KN-MET Ts= 8.5 KN-MET LOAD 28
STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 10 MM 2-LEGGED STIRRUPS AT 123. MM C/C FOR 488. MM
ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 2.18 SQ.CM.

C:\Users\fierr\Desktop\Fierre\PROJECTS\PABLO GUTIERREZ\STAAD FILES\SUBSTRUCTURE\PG-SUBSTRUCTURE.anl Page 52 of 72

Saturday, February 03, 2024, 04:37 PM
STAAD SPACE -- PAGE NO. 53

_1009J__ 1675X 250X 400_1010J

| |
||=========================================================================||
| 3No16 H 352.| 0.TO6152652. 358.TO 1675 | | | | | |
| 5*10c/c123 | | | | | 5*10c/c123 | |
| 2No16 H 48.| 0.TO 1675| | | | | | |
||=========================================================================||
| |
|___________________________________________________________________________|
_________ _________ _________ _________
| | | | | | | |
| ooo | | ooo | | ooo | | oo |
| 3#16 | | 2#16 | | 2#16 | | 2#16 |
| | | | | | | |
| 2#16 | | 2#16 | | 2#16 | | 2#16 |
| oo | | oo | | oo | | oo |
| | | | | | | |
|_________| |_________| |_________| |_________|

END OF BEAM DESIGN******

C:\Users\fierr\Desktop\Fierre\PROJECTS\PABLO GUTIERREZ\STAAD FILES\SUBSTRUCTURE\PG-SUBSTRUCTURE.anl Page 53 of 72

Saturday, February 03, 2024, 04:37 PM
STAAD SPACE -- PAGE NO. 54

ACI 318-11 COLUMN NO. 4 DESIGN RESULTS

===============================================

FY - 420.0 FC - 21.0 MPA, RECT SIZE - 250.0 X 400.0 MMS, TIED

ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 1000.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI

----------------------------------------------------------

4 - 20 MM 1.257 15 END 0.650

(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 250.00 MM

COLUMN INTERACTION: MOMENT ABOUT Z -AXIS (KN-MET)

--------------------------------------------------------
P0 Pn max P-bal. M-bal. e-bal. (MM)
2290.36 1832.29 769.64 165.34 214.8
M0 P-tens. Des.Pn Des.Mn e/h
84.75 -527.79 431.64 30.06 0.04975
--------------------------------------------------------

COLUMN INTERACTION: MOMENT ABOUT Y -AXIS (KN-MET)

--------------------------------------------------------
P0 Pn max P-bal. M-bal. e-bal. (MM)
2290.36 1832.29 655.51 88.75 135.4
M0 P-tens. Des.Pn Des.Mn e/h
48.16 -527.79 431.64 20.25 0.03352
--------------------------------------------------------
Pn Mn Pn Mn (@ Z )
| 1691.34 93.31 845.67 161.21
P0 |* 1550.40 109.15 704.73 163.24
| * 1409.45 122.85 563.78 154.70
Pn,max|__* 1268.51 134.50 422.84 141.21
| * 1127.56 144.49 281.89 124.54
Pn | * 986.62 153.24 140.95 105.42
NOMINAL| * Pn Mn Pn Mn (@ Y )
AXIAL| * 1691.34 53.80 845.67 86.25
COMPRESSION| * 1550.40 63.04 704.73 88.15
Pb|-------*Mb 1409.45 70.36 563.78 85.16
| * 1268.51 76.46 422.84 78.01
___________|____*_______ 1127.56 80.94 281.89 69.17
| * M0 Mn, 986.62 83.92 140.95 59.08
| * BENDING
P-tens|* MOMENT
|

C:\Users\fierr\Desktop\Fierre\PROJECTS\PABLO GUTIERREZ\STAAD FILES\SUBSTRUCTURE\PG-SUBSTRUCTURE.anl Page 54 of 72

Saturday, February 03, 2024, 04:37 PM
STAAD SPACE -- PAGE NO. 55

ACI 318-11 COLUMN NO. 5 DESIGN RESULTS

===============================================

FY - 420.0 FC - 21.0 MPA, RECT SIZE - 250.0 X 400.0 MMS, TIED

ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 1000.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI

----------------------------------------------------------

4 - 20 MM 1.257 15 END 0.650

(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 250.00 MM

COLUMN INTERACTION: MOMENT ABOUT Z -AXIS (KN-MET)

--------------------------------------------------------
P0 Pn max P-bal. M-bal. e-bal. (MM)
2290.36 1832.29 769.64 165.34 214.8
M0 P-tens. Des.Pn Des.Mn e/h
84.75 -527.79 664.58 20.43 0.02196
--------------------------------------------------------

COLUMN INTERACTION: MOMENT ABOUT Y -AXIS (KN-MET)

--------------------------------------------------------
P0 Pn max P-bal. M-bal. e-bal. (MM)
2290.36 1832.29 655.51 88.75 135.4
M0 P-tens. Des.Pn Des.Mn e/h
48.16 -527.79 664.58 23.11 0.02484
--------------------------------------------------------
Pn Mn Pn Mn (@ Z )
| 1691.34 93.31 845.67 161.21
P0 |* 1550.40 109.15 704.73 163.24
| * 1409.45 122.85 563.78 154.70
Pn,max|__* 1268.51 134.50 422.84 141.21
| * 1127.56 144.49 281.89 124.54
Pn | * 986.62 153.24 140.95 105.42
NOMINAL| * Pn Mn Pn Mn (@ Y )
AXIAL| * 1691.34 53.80 845.67 86.25
COMPRESSION| * 1550.40 63.04 704.73 88.15
Pb|-------*Mb 1409.45 70.36 563.78 85.16
| * 1268.51 76.46 422.84 78.01
___________|____*_______ 1127.56 80.94 281.89 69.17
| * M0 Mn, 986.62 83.92 140.95 59.08
| * BENDING
P-tens|* MOMENT
|

C:\Users\fierr\Desktop\Fierre\PROJECTS\PABLO GUTIERREZ\STAAD FILES\SUBSTRUCTURE\PG-SUBSTRUCTURE.anl Page 55 of 72

Saturday, February 03, 2024, 04:37 PM
STAAD SPACE -- PAGE NO. 56

ACI 318-11 COLUMN NO. 6 DESIGN RESULTS

===============================================

FY - 420.0 FC - 21.0 MPA, RECT SIZE - 250.0 X 400.0 MMS, TIED

ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 1000.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI

----------------------------------------------------------

4 - 20 MM 1.257 15 END 0.650

(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 250.00 MM

COLUMN INTERACTION: MOMENT ABOUT Z -AXIS (KN-MET)

--------------------------------------------------------
P0 Pn max P-bal. M-bal. e-bal. (MM)
2290.36 1832.29 769.64 165.34 214.8
M0 P-tens. Des.Pn Des.Mn e/h
84.75 -527.79 779.17 33.48 0.03069
--------------------------------------------------------

COLUMN INTERACTION: MOMENT ABOUT Y -AXIS (KN-MET)

--------------------------------------------------------
P0 Pn max P-bal. M-bal. e-bal. (MM)
2290.36 1832.29 655.51 88.75 135.4
M0 P-tens. Des.Pn Des.Mn e/h
48.16 -527.79 779.17 26.13 0.02396
--------------------------------------------------------
Pn Mn Pn Mn (@ Z )
| 1691.34 93.31 845.67 161.21
P0 |* 1550.40 109.15 704.73 163.24
| * 1409.45 122.85 563.78 154.70
Pn,max|__* 1268.51 134.50 422.84 141.21
| * 1127.56 144.49 281.89 124.54
Pn | * 986.62 153.24 140.95 105.42
NOMINAL| * Pn Mn Pn Mn (@ Y )
AXIAL| * 1691.34 53.80 845.67 86.25
COMPRESSION| * 1550.40 63.04 704.73 88.15
Pb|-------*Mb 1409.45 70.36 563.78 85.16
| * 1268.51 76.46 422.84 78.01
___________|____*_______ 1127.56 80.94 281.89 69.17
| * M0 Mn, 986.62 83.92 140.95 59.08
| * BENDING
P-tens|* MOMENT
|

C:\Users\fierr\Desktop\Fierre\PROJECTS\PABLO GUTIERREZ\STAAD FILES\SUBSTRUCTURE\PG-SUBSTRUCTURE.anl Page 56 of 72

Saturday, February 03, 2024, 04:37 PM
STAAD SPACE -- PAGE NO. 57

ACI 318-11 COLUMN NO. 7 DESIGN RESULTS

===============================================

FY - 420.0 FC - 21.0 MPA, RECT SIZE - 250.0 X 400.0 MMS, TIED

ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 1000.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI

----------------------------------------------------------

4 - 20 MM 1.257 15 END 0.650

(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 250.00 MM

COLUMN INTERACTION: MOMENT ABOUT Z -AXIS (KN-MET)

--------------------------------------------------------
P0 Pn max P-bal. M-bal. e-bal. (MM)
2290.36 1832.29 769.64 165.34 214.8
M0 P-tens. Des.Pn Des.Mn e/h
84.75 -527.79 559.33 31.56 0.04031
--------------------------------------------------------

COLUMN INTERACTION: MOMENT ABOUT Y -AXIS (KN-MET)

--------------------------------------------------------
P0 Pn max P-bal. M-bal. e-bal. (MM)
2290.36 1832.29 655.51 88.75 135.4
M0 P-tens. Des.Pn Des.Mn e/h
48.16 -527.79 559.33 33.00 0.04214
--------------------------------------------------------
Pn Mn Pn Mn (@ Z )
| 1691.34 93.31 845.67 161.21
P0 |* 1550.40 109.15 704.73 163.24
| * 1409.45 122.85 563.78 154.70
Pn,max|__* 1268.51 134.50 422.84 141.21
| * 1127.56 144.49 281.89 124.54
Pn | * 986.62 153.24 140.95 105.42
NOMINAL| * Pn Mn Pn Mn (@ Y )
AXIAL| * 1691.34 53.80 845.67 86.25
COMPRESSION| * 1550.40 63.04 704.73 88.15
Pb|-------*Mb 1409.45 70.36 563.78 85.16
| * 1268.51 76.46 422.84 78.01
___________|____*_______ 1127.56 80.94 281.89 69.17
| * M0 Mn, 986.62 83.92 140.95 59.08
| * BENDING
P-tens|* MOMENT
|

C:\Users\fierr\Desktop\Fierre\PROJECTS\PABLO GUTIERREZ\STAAD FILES\SUBSTRUCTURE\PG-SUBSTRUCTURE.anl Page 57 of 72

Saturday, February 03, 2024, 04:37 PM
STAAD SPACE -- PAGE NO. 58

ACI 318-11 COLUMN NO. 11 DESIGN RESULTS

===============================================

FY - 420.0 FC - 21.0 MPA, RECT SIZE - 250.0 X 400.0 MMS, TIED

AREA OF STEEL REQUIRED = 1058.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI

----------------------------------------------------------

4 - 20 MM 1.257 45 STA 0.650

(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 250.00 MM

COLUMN INTERACTION: MOMENT ABOUT Z -AXIS (KN-MET)

--------------------------------------------------------
P0 Pn max P-bal. M-bal. e-bal. (MM)
2290.36 1832.29 769.64 165.34 214.8
M0 P-tens. Des.Pn Des.Mn e/h
84.75 -527.79 333.09 109.08 0.23391
--------------------------------------------------------

COLUMN INTERACTION: MOMENT ABOUT Y -AXIS (KN-MET)

--------------------------------------------------------
P0 Pn max P-bal. M-bal. e-bal. (MM)
2290.36 1832.29 655.51 88.75 135.4
M0 P-tens. Des.Pn Des.Mn e/h
48.16 -527.79 333.09 1.96 0.00420
--------------------------------------------------------
Pn Mn Pn Mn (@ Z )
| 1691.34 93.31 845.67 161.21
P0 |* 1550.40 109.15 704.73 163.24
| * 1409.45 122.85 563.78 154.70
Pn,max|__* 1268.51 134.50 422.84 141.21
| * 1127.56 144.49 281.89 124.54
Pn | * 986.62 153.24 140.95 105.42
NOMINAL| * Pn Mn Pn Mn (@ Y )
AXIAL| * 1691.34 53.80 845.67 86.25
COMPRESSION| * 1550.40 63.04 704.73 88.15
Pb|-------*Mb 1409.45 70.36 563.78 85.16
| * 1268.51 76.46 422.84 78.01
___________|____*_______ 1127.56 80.94 281.89 69.17
| * M0 Mn, 986.62 83.92 140.95 59.08
| * BENDING
P-tens|* MOMENT
|

C:\Users\fierr\Desktop\Fierre\PROJECTS\PABLO GUTIERREZ\STAAD FILES\SUBSTRUCTURE\PG-SUBSTRUCTURE.anl Page 58 of 72

Saturday, February 03, 2024, 04:37 PM
STAAD SPACE -- PAGE NO. 59

ACI 318-11 COLUMN NO. 12 DESIGN RESULTS

===============================================

FY - 420.0 FC - 21.0 MPA, RECT SIZE - 250.0 X 400.0 MMS, TIED

ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 1000.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI

----------------------------------------------------------

4 - 20 MM 1.257 15 END 0.650

(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 250.00 MM

COLUMN INTERACTION: MOMENT ABOUT Z -AXIS (KN-MET)

--------------------------------------------------------
P0 Pn max P-bal. M-bal. e-bal. (MM)
2290.36 1832.29 769.64 165.34 214.8
M0 P-tens. Des.Pn Des.Mn e/h
84.75 -527.79 848.44 0.87 0.00073
--------------------------------------------------------

COLUMN INTERACTION: MOMENT ABOUT Y -AXIS (KN-MET)

--------------------------------------------------------
P0 Pn max P-bal. M-bal. e-bal. (MM)
2290.36 1832.29 655.51 88.75 135.4
M0 P-tens. Des.Pn Des.Mn e/h
48.16 -527.79 848.44 14.77 0.01244
--------------------------------------------------------
Pn Mn Pn Mn (@ Z )
| 1691.34 93.31 845.67 161.21
P0 |* 1550.40 109.15 704.73 163.24
| * 1409.45 122.85 563.78 154.70
Pn,max|__* 1268.51 134.50 422.84 141.21
| * 1127.56 144.49 281.89 124.54
Pn | * 986.62 153.24 140.95 105.42
NOMINAL| * Pn Mn Pn Mn (@ Y )
AXIAL| * 1691.34 53.80 845.67 86.25
COMPRESSION| * 1550.40 63.04 704.73 88.15
Pb|-------*Mb 1409.45 70.36 563.78 85.16
| * 1268.51 76.46 422.84 78.01
___________|____*_______ 1127.56 80.94 281.89 69.17
| * M0 Mn, 986.62 83.92 140.95 59.08
| * BENDING
P-tens|* MOMENT
|

C:\Users\fierr\Desktop\Fierre\PROJECTS\PABLO GUTIERREZ\STAAD FILES\SUBSTRUCTURE\PG-SUBSTRUCTURE.anl Page 59 of 72

Saturday, February 03, 2024, 04:37 PM
STAAD SPACE -- PAGE NO. 60

ACI 318-11 COLUMN NO. 13 DESIGN RESULTS

===============================================

FY - 420.0 FC - 21.0 MPA, RECT SIZE - 250.0 X 400.0 MMS, TIED

ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 1000.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI

----------------------------------------------------------

4 - 20 MM 1.257 15 END 0.650

(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 250.00 MM

COLUMN INTERACTION: MOMENT ABOUT Z -AXIS (KN-MET)

--------------------------------------------------------
P0 Pn max P-bal. M-bal. e-bal. (MM)
2290.36 1832.29 769.64 165.34 214.8
M0 P-tens. Des.Pn Des.Mn e/h
84.75 -527.79 859.28 26.02 0.02163
--------------------------------------------------------

COLUMN INTERACTION: MOMENT ABOUT Y -AXIS (KN-MET)

--------------------------------------------------------
P0 Pn max P-bal. M-bal. e-bal. (MM)
2290.36 1832.29 655.51 88.75 135.4
M0 P-tens. Des.Pn Des.Mn e/h
48.16 -527.79 859.28 17.64 0.01466
--------------------------------------------------------
Pn Mn Pn Mn (@ Z )
| 1691.34 93.31 845.67 161.21
P0 |* 1550.40 109.15 704.73 163.24
| * 1409.45 122.85 563.78 154.70
Pn,max|__* 1268.51 134.50 422.84 141.21
| * 1127.56 144.49 281.89 124.54
Pn | * 986.62 153.24 140.95 105.42
NOMINAL| * Pn Mn Pn Mn (@ Y )
AXIAL| * 1691.34 53.80 845.67 86.25
COMPRESSION| * 1550.40 63.04 704.73 88.15
Pb|-------*Mb 1409.45 70.36 563.78 85.16
| * 1268.51 76.46 422.84 78.01
___________|____*_______ 1127.56 80.94 281.89 69.17
| * M0 Mn, 986.62 83.92 140.95 59.08
| * BENDING
P-tens|* MOMENT
|

C:\Users\fierr\Desktop\Fierre\PROJECTS\PABLO GUTIERREZ\STAAD FILES\SUBSTRUCTURE\PG-SUBSTRUCTURE.anl Page 60 of 72

Saturday, February 03, 2024, 04:37 PM
STAAD SPACE -- PAGE NO. 61

ACI 318-11 COLUMN NO. 14 DESIGN RESULTS

===============================================

FY - 420.0 FC - 21.0 MPA, RECT SIZE - 250.0 X 400.0 MMS, TIED

ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 1000.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI

----------------------------------------------------------

4 - 20 MM 1.257 15 END 0.650

(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 250.00 MM

COLUMN INTERACTION: MOMENT ABOUT Z -AXIS (KN-MET)

--------------------------------------------------------
P0 Pn max P-bal. M-bal. e-bal. (MM)
2290.36 1832.29 769.64 165.34 214.8
M0 P-tens. Des.Pn Des.Mn e/h
84.75 -527.79 809.54 0.71 0.00063
--------------------------------------------------------

COLUMN INTERACTION: MOMENT ABOUT Y -AXIS (KN-MET)

--------------------------------------------------------
P0 Pn max P-bal. M-bal. e-bal. (MM)
2290.36 1832.29 655.51 88.75 135.4
M0 P-tens. Des.Pn Des.Mn e/h
48.16 -527.79 809.54 20.95 0.01848
--------------------------------------------------------
Pn Mn Pn Mn (@ Z )
| 1691.34 93.31 845.67 161.21
P0 |* 1550.40 109.15 704.73 163.24
| * 1409.45 122.85 563.78 154.70
Pn,max|__* 1268.51 134.50 422.84 141.21
| * 1127.56 144.49 281.89 124.54
Pn | * 986.62 153.24 140.95 105.42
NOMINAL| * Pn Mn Pn Mn (@ Y )
AXIAL| * 1691.34 53.80 845.67 86.25
COMPRESSION| * 1550.40 63.04 704.73 88.15
Pb|-------*Mb 1409.45 70.36 563.78 85.16
| * 1268.51 76.46 422.84 78.01
___________|____*_______ 1127.56 80.94 281.89 69.17
| * M0 Mn, 986.62 83.92 140.95 59.08
| * BENDING
P-tens|* MOMENT
|

C:\Users\fierr\Desktop\Fierre\PROJECTS\PABLO GUTIERREZ\STAAD FILES\SUBSTRUCTURE\PG-SUBSTRUCTURE.anl Page 61 of 72

Saturday, February 03, 2024, 04:37 PM
STAAD SPACE -- PAGE NO. 62

ACI 318-11 COLUMN NO. 18 DESIGN RESULTS

===============================================

FY - 420.0 FC - 21.0 MPA, RECT SIZE - 250.0 X 400.0 MMS, TIED

ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 1000.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI

----------------------------------------------------------

4 - 20 MM 1.257 15 END 0.650

(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 250.00 MM

COLUMN INTERACTION: MOMENT ABOUT Z -AXIS (KN-MET)

--------------------------------------------------------
P0 Pn max P-bal. M-bal. e-bal. (MM)
2290.36 1832.29 769.64 165.34 214.8
M0 P-tens. Des.Pn Des.Mn e/h
84.75 -527.79 302.50 24.61 0.05810
--------------------------------------------------------

COLUMN INTERACTION: MOMENT ABOUT Y -AXIS (KN-MET)

--------------------------------------------------------
P0 Pn max P-bal. M-bal. e-bal. (MM)
2290.36 1832.29 655.51 88.75 135.4
M0 P-tens. Des.Pn Des.Mn e/h
48.16 -527.79 302.50 20.40 0.04817
--------------------------------------------------------
Pn Mn Pn Mn (@ Z )
| 1691.34 93.31 845.67 161.21
P0 |* 1550.40 109.15 704.73 163.24
| * 1409.45 122.85 563.78 154.70
Pn,max|__* 1268.51 134.50 422.84 141.21
| * 1127.56 144.49 281.89 124.54
Pn | * 986.62 153.24 140.95 105.42
NOMINAL| * Pn Mn Pn Mn (@ Y )
AXIAL| * 1691.34 53.80 845.67 86.25
COMPRESSION| * 1550.40 63.04 704.73 88.15
Pb|-------*Mb 1409.45 70.36 563.78 85.16
| * 1268.51 76.46 422.84 78.01
___________|____*_______ 1127.56 80.94 281.89 69.17
| * M0 Mn, 986.62 83.92 140.95 59.08
| * BENDING
P-tens|* MOMENT
|

C:\Users\fierr\Desktop\Fierre\PROJECTS\PABLO GUTIERREZ\STAAD FILES\SUBSTRUCTURE\PG-SUBSTRUCTURE.anl Page 62 of 72

Saturday, February 03, 2024, 04:37 PM
STAAD SPACE -- PAGE NO. 63

ACI 318-11 COLUMN NO. 19 DESIGN RESULTS

===============================================

FY - 420.0 FC - 21.0 MPA, RECT SIZE - 250.0 X 400.0 MMS, TIED

ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 1000.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI

----------------------------------------------------------

4 - 20 MM 1.257 15 END 0.650

(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 250.00 MM

COLUMN INTERACTION: MOMENT ABOUT Z -AXIS (KN-MET)

--------------------------------------------------------
P0 Pn max P-bal. M-bal. e-bal. (MM)
2290.36 1832.29 769.64 165.34 214.8
M0 P-tens. Des.Pn Des.Mn e/h
84.75 -527.79 415.05 26.12 0.04495
--------------------------------------------------------

COLUMN INTERACTION: MOMENT ABOUT Y -AXIS (KN-MET)

--------------------------------------------------------
P0 Pn max P-bal. M-bal. e-bal. (MM)
2290.36 1832.29 655.51 88.75 135.4
M0 P-tens. Des.Pn Des.Mn e/h
48.16 -527.79 415.05 20.63 0.03550
--------------------------------------------------------
Pn Mn Pn Mn (@ Z )
| 1691.34 93.31 845.67 161.21
P0 |* 1550.40 109.15 704.73 163.24
| * 1409.45 122.85 563.78 154.70
Pn,max|__* 1268.51 134.50 422.84 141.21
| * 1127.56 144.49 281.89 124.54
Pn | * 986.62 153.24 140.95 105.42
NOMINAL| * Pn Mn Pn Mn (@ Y )
AXIAL| * 1691.34 53.80 845.67 86.25
COMPRESSION| * 1550.40 63.04 704.73 88.15
Pb|-------*Mb 1409.45 70.36 563.78 85.16
| * 1268.51 76.46 422.84 78.01
___________|____*_______ 1127.56 80.94 281.89 69.17
| * M0 Mn, 986.62 83.92 140.95 59.08
| * BENDING
P-tens|* MOMENT
|

C:\Users\fierr\Desktop\Fierre\PROJECTS\PABLO GUTIERREZ\STAAD FILES\SUBSTRUCTURE\PG-SUBSTRUCTURE.anl Page 63 of 72

Saturday, February 03, 2024, 04:37 PM
STAAD SPACE -- PAGE NO. 64

ACI 318-11 COLUMN NO. 20 DESIGN RESULTS

===============================================

FY - 420.0 FC - 21.0 MPA, RECT SIZE - 250.0 X 400.0 MMS, TIED

ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 1000.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI

----------------------------------------------------------

4 - 20 MM 1.257 15 END 0.650

(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 250.00 MM

COLUMN INTERACTION: MOMENT ABOUT Z -AXIS (KN-MET)

--------------------------------------------------------
P0 Pn max P-bal. M-bal. e-bal. (MM)
2290.36 1832.29 769.64 165.34 214.8
M0 P-tens. Des.Pn Des.Mn e/h
84.75 -527.79 495.70 31.39 0.04524
--------------------------------------------------------

COLUMN INTERACTION: MOMENT ABOUT Y -AXIS (KN-MET)

--------------------------------------------------------
P0 Pn max P-bal. M-bal. e-bal. (MM)
2290.36 1832.29 655.51 88.75 135.4
M0 P-tens. Des.Pn Des.Mn e/h
48.16 -527.79 495.70 0.96 0.00138
--------------------------------------------------------
Pn Mn Pn Mn (@ Z )
| 1691.34 93.31 845.67 161.21
P0 |* 1550.40 109.15 704.73 163.24
| * 1409.45 122.85 563.78 154.70
Pn,max|__* 1268.51 134.50 422.84 141.21
| * 1127.56 144.49 281.89 124.54
Pn | * 986.62 153.24 140.95 105.42
NOMINAL| * Pn Mn Pn Mn (@ Y )
AXIAL| * 1691.34 53.80 845.67 86.25
COMPRESSION| * 1550.40 63.04 704.73 88.15
Pb|-------*Mb 1409.45 70.36 563.78 85.16
| * 1268.51 76.46 422.84 78.01
___________|____*_______ 1127.56 80.94 281.89 69.17
| * M0 Mn, 986.62 83.92 140.95 59.08
| * BENDING
P-tens|* MOMENT
|

C:\Users\fierr\Desktop\Fierre\PROJECTS\PABLO GUTIERREZ\STAAD FILES\SUBSTRUCTURE\PG-SUBSTRUCTURE.anl Page 64 of 72

Saturday, February 03, 2024, 04:37 PM
STAAD SPACE -- PAGE NO. 65

ACI 318-11 COLUMN NO. 21 DESIGN RESULTS

===============================================

FY - 420.0 FC - 21.0 MPA, RECT SIZE - 250.0 X 400.0 MMS, TIED

ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 1000.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI

----------------------------------------------------------

4 - 20 MM 1.257 15 END 0.650

(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 250.00 MM

COLUMN INTERACTION: MOMENT ABOUT Z -AXIS (KN-MET)

--------------------------------------------------------
P0 Pn max P-bal. M-bal. e-bal. (MM)
2290.36 1832.29 769.64 165.34 214.8
M0 P-tens. Des.Pn Des.Mn e/h
84.75 -527.79 560.81 26.76 0.03408
--------------------------------------------------------

COLUMN INTERACTION: MOMENT ABOUT Y -AXIS (KN-MET)

--------------------------------------------------------
P0 Pn max P-bal. M-bal. e-bal. (MM)
2290.36 1832.29 655.51 88.75 135.4
M0 P-tens. Des.Pn Des.Mn e/h
48.16 -527.79 560.81 20.29 0.02585
--------------------------------------------------------
Pn Mn Pn Mn (@ Z )
| 1691.34 93.31 845.67 161.21
P0 |* 1550.40 109.15 704.73 163.24
| * 1409.45 122.85 563.78 154.70
Pn,max|__* 1268.51 134.50 422.84 141.21
| * 1127.56 144.49 281.89 124.54
Pn | * 986.62 153.24 140.95 105.42
NOMINAL| * Pn Mn Pn Mn (@ Y )
AXIAL| * 1691.34 53.80 845.67 86.25
COMPRESSION| * 1550.40 63.04 704.73 88.15
Pb|-------*Mb 1409.45 70.36 563.78 85.16
| * 1268.51 76.46 422.84 78.01
___________|____*_______ 1127.56 80.94 281.89 69.17
| * M0 Mn, 986.62 83.92 140.95 59.08
| * BENDING
P-tens|* MOMENT
|

C:\Users\fierr\Desktop\Fierre\PROJECTS\PABLO GUTIERREZ\STAAD FILES\SUBSTRUCTURE\PG-SUBSTRUCTURE.anl Page 65 of 72

Saturday, February 03, 2024, 04:37 PM
STAAD SPACE -- PAGE NO. 66

ACI 318-11 COLUMN NO. 32 DESIGN RESULTS

===============================================

FY - 420.0 FC - 21.0 MPA, CIRC SIZE 300.0 MMS DIAMETER TIED

ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 706.9 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI

----------------------------------------------------------

6 - 16 MM 1.707 15 END 0.650

(EQUALLY SPACED)
TIE BAR NUMBER 12 SPACING 256.00 MM

COLUMN INTERACTION: MOMENT ABOUT Z/Y -AXIS (KN-MET)

--------------------------------------------------------
P0 Pn max P-bal. M-bal. e-bal. (MM)
1746.89 1397.51 483.19 63.27 130.9
M0 P-tens. Des.Pn Des.Mn e/h
46.00 -506.68 148.15 23.67 0.11296
--------------------------------------------------------
Pn Mn Pn Mn
| 1290.01 39.04 645.01 61.67
P0 |* 1182.51 45.28 537.50 62.87
| * 1075.01 50.44 430.00 62.70
Pn,max|__* 967.51 54.53 322.50 61.24
| * 860.01 57.54 215.00 59.44
Pn | * 752.51 59.92 107.50 53.19
NOMINAL| *
AXIAL| *
COMPRESSION| *
Pb|-------*Mb
| *
___________|____*_______
| * M0 Mn,
| * BENDING
P-tens|* MOMENT
|

ACI 318-11 COLUMN NO. 33 DESIGN RESULTS

===============================================

FY - 420.0 FC - 21.0 MPA, CIRC SIZE 300.0 MMS DIAMETER TIED

AREA OF STEEL REQUIRED = 747.9 SQ. MM

C:\Users\fierr\Desktop\Fierre\PROJECTS\PABLO GUTIERREZ\STAAD FILES\SUBSTRUCTURE\PG-SUBSTRUCTURE.anl Page 66 of 72

Saturday, February 03, 2024, 04:37 PM
STAAD SPACE -- PAGE NO. 67

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI

----------------------------------------------------------

6 - 16 MM 1.707 45 STA 0.900

(EQUALLY SPACED)
TIE BAR NUMBER 12 SPACING 256.00 MM

COLUMN INTERACTION: MOMENT ABOUT Z/Y -AXIS (KN-MET)

--------------------------------------------------------
P0 Pn max P-bal. M-bal. e-bal. (MM)
1746.89 1397.51 483.19 63.27 130.9
M0 P-tens. Des.Pn Des.Mn e/h
46.00 -506.68 -54.66 27.48 -.00750
--------------------------------------------------------
Pn Mn Pn Mn
| 1290.01 39.04 645.01 61.67
P0 |* 1182.51 45.28 537.50 62.87
| * 1075.01 50.44 430.00 62.70
Pn,max|__* 967.51 54.53 322.50 61.24
| * 860.01 57.54 215.00 59.44
Pn | * 752.51 59.92 107.50 53.19
NOMINAL| *
AXIAL| *
COMPRESSION| *
Pb|-------*Mb
| *
___________|____*_______
| * M0 Mn,
| * BENDING
P-tens|* MOMENT
|

ACI 318-11 COLUMN NO. 37 DESIGN RESULTS

===============================================

FY - 420.0 FC - 21.0 MPA, CIRC SIZE 300.0 MMS DIAMETER TIED

ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 706.9 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI

----------------------------------------------------------

6 - 16 MM 1.707 15 END 0.650

(EQUALLY SPACED)
TIE BAR NUMBER 12 SPACING 256.00 MM

COLUMN INTERACTION: MOMENT ABOUT Z/Y -AXIS (KN-MET)

C:\Users\fierr\Desktop\Fierre\PROJECTS\PABLO GUTIERREZ\STAAD FILES\SUBSTRUCTURE\PG-SUBSTRUCTURE.anl Page 67 of 72

Saturday, February 03, 2024, 04:37 PM
STAAD SPACE -- PAGE NO. 68

--------------------------------------------------------
P0 Pn max P-bal. M-bal. e-bal. (MM)
1746.89 1397.51 483.19 63.27 130.9
M0 P-tens. Des.Pn Des.Mn e/h
46.00 -506.68 110.28 16.48 0.00096
--------------------------------------------------------
Pn Mn Pn Mn
| 1290.01 39.04 645.01 61.67
P0 |* 1182.51 45.28 537.50 62.87
| * 1075.01 50.44 430.00 62.70
Pn,max|__* 967.51 54.53 322.50 61.24
| * 860.01 57.54 215.00 59.44
Pn | * 752.51 59.92 107.50 53.19
NOMINAL| *
AXIAL| *
COMPRESSION| *
Pb|-------*Mb
| *
___________|____*_______
| * M0 Mn,
| * BENDING
P-tens|* MOMENT
|

ACI 318-11 COLUMN NO. 38 DESIGN RESULTS

===============================================

FY - 420.0 FC - 21.0 MPA, CIRC SIZE 300.0 MMS DIAMETER TIED

ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 706.9 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI

----------------------------------------------------------

6 - 16 MM 1.707 15 END 0.650

(EQUALLY SPACED)
TIE BAR NUMBER 12 SPACING 256.00 MM

COLUMN INTERACTION: MOMENT ABOUT Z/Y -AXIS (KN-MET)

C:\Users\fierr\Desktop\Fierre\PROJECTS\PABLO GUTIERREZ\STAAD FILES\SUBSTRUCTURE\PG-SUBSTRUCTURE.anl Page 68 of 72

Saturday, February 03, 2024, 04:37 PM
STAAD SPACE -- PAGE NO. 69

Pn Mn Pn Mn
| 1290.01 39.04 645.01 61.67
P0 |* 1182.51 45.28 537.50 62.87
| * 1075.01 50.44 430.00 62.70
Pn,max|__* 967.51 54.53 322.50 61.24
| * 860.01 57.54 215.00 59.44
Pn | * 752.51 59.92 107.50 53.19
NOMINAL| *
AXIAL| *
COMPRESSION| *
Pb|-------*Mb
| *
___________|____*_______
| * M0 Mn,
| * BENDING
P-tens|* MOMENT
|

ACI 318-11 COLUMN NO. 39 DESIGN RESULTS

===============================================

FY - 420.0 FC - 21.0 MPA, CIRC SIZE 300.0 MMS DIAMETER TIED

ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 706.9 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI

----------------------------------------------------------

6 - 16 MM 1.707 15 END 0.650

(EQUALLY SPACED)
TIE BAR NUMBER 12 SPACING 256.00 MM

COLUMN INTERACTION: MOMENT ABOUT Z/Y -AXIS (KN-MET)

C:\Users\fierr\Desktop\Fierre\PROJECTS\PABLO GUTIERREZ\STAAD FILES\SUBSTRUCTURE\PG-SUBSTRUCTURE.anl Page 69 of 72

Saturday, February 03, 2024, 04:37 PM
STAAD SPACE -- PAGE NO. 70

ACI 318-11 COLUMN NO. 44 DESIGN RESULTS

===============================================

FY - 420.0 FC - 21.0 MPA, RECT SIZE - 250.0 X 400.0 MMS, TIED

AREA OF STEEL REQUIRED = 1136.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI

----------------------------------------------------------

4 - 20 MM 1.257 45 STA 0.650

(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 250.00 MM

COLUMN INTERACTION: MOMENT ABOUT Z -AXIS (KN-MET)

--------------------------------------------------------
P0 Pn max P-bal. M-bal. e-bal. (MM)
2290.36 1832.29 769.64 165.34 214.8
M0 P-tens. Des.Pn Des.Mn e/h
84.75 -527.79 140.15 94.98 0.48404
--------------------------------------------------------

COLUMN INTERACTION: MOMENT ABOUT Y -AXIS (KN-MET)

C:\Users\fierr\Desktop\Fierre\PROJECTS\PABLO GUTIERREZ\STAAD FILES\SUBSTRUCTURE\PG-SUBSTRUCTURE.anl Page 70 of 72

Saturday, February 03, 2024, 04:37 PM
STAAD SPACE -- PAGE NO. 71

Pn Mn Pn Mn (@ Z )
| 1691.34 93.31 845.67 161.21
P0 |* 1550.40 109.15 704.73 163.24
| * 1409.45 122.85 563.78 154.70
Pn,max|__* 1268.51 134.50 422.84 141.21
| * 1127.56 144.49 281.89 124.54
Pn | * 986.62 153.24 140.95 105.42
NOMINAL| * Pn Mn Pn Mn (@ Y )
AXIAL| * 1691.34 53.80 845.67 86.25
COMPRESSION| * 1550.40 63.04 704.73 88.15
Pb|-------*Mb 1409.45 70.36 563.78 85.16
| * 1268.51 76.46 422.84 78.01
___________|____*_______ 1127.56 80.94 281.89 69.17
| * M0 Mn, 986.62 83.92 140.95 59.08
| * BENDING
P-tens|* MOMENT
|

END OF COLUMN DESIGN RESULTS

* END OF THE STAAD.Pro RUN *

DATE= FEB 3,2024 TIME= 16:36:28

C:\Users\fierr\Desktop\Fierre\PROJECTS\PABLO GUTIERREZ\STAAD FILES\SUBSTRUCTURE\PG-SUBSTRUCTURE.anl Page 71 of 72

Saturday, February 03, 2024, 04:37 PM
STAAD SPACE -- PAGE NO. 72

************************************************************
* For technical assistance on STAAD.Pro, please visit *
* http://selectservices.bentley.com/en-US/ *
* *
* Details about additional assistance from *
* Bentley and Partners can be found at program menu *
* Help->Technical Support *
* *
* Copyright (c) 1997-2015 Bentley Systems, Inc.
* http://www.bentley.com *
************************************************************

C:\Users\fierr\Desktop\Fierre\PROJECTS\PABLO GUTIERREZ\STAAD FILES\SUBSTRUCTURE\PG-SUBSTRUCTURE.anl Page 72 of 72

RC Design
No ratings yet
RC Design
26 pages
CE51A
No ratings yet
CE51A
86 pages
3ST 12CL
No ratings yet
3ST 12CL
672 pages
Iso Kauswagan Analysis
No ratings yet
Iso Kauswagan Analysis
39 pages
Pole Design
No ratings yet
Pole Design
12 pages
Tuesday, March 09, 2021, 08:48 AM: Warning - All Degrees of Freedom Fixed
No ratings yet
Tuesday, March 09, 2021, 08:48 AM: Warning - All Degrees of Freedom Fixed
5 pages
Truss Analysis Output
No ratings yet
Truss Analysis Output
11 pages
Wednesday, August 25, 2010, 11:55 AM: Page 1 of 8 E:/ravi/Structure1.anl
No ratings yet
Wednesday, August 25, 2010, 11:55 AM: Page 1 of 8 E:/ravi/Structure1.anl
8 pages
Platform Design Calculation - Rev B - 21!03!18
No ratings yet
Platform Design Calculation - Rev B - 21!03!18
10 pages
Hoardings Design Cal Final
100% (1)
Hoardings Design Cal Final
10 pages
Output 3
No ratings yet
Output 3
131 pages
Truss Design
No ratings yet
Truss Design
127 pages
p1 Truss 11m
No ratings yet
p1 Truss 11m
220 pages
CABIN Room OUTPUT FILE
No ratings yet
CABIN Room OUTPUT FILE
21 pages
Platform
No ratings yet
Platform
11 pages
Staad Finals
No ratings yet
Staad Finals
5 pages
Thursday, October 24, 2024, 09:16 PM: Page 1 of 136 D:/STRUCTURE/Structure1.anl
No ratings yet
Thursday, October 24, 2024, 09:16 PM: Page 1 of 136 D:/STRUCTURE/Structure1.anl
136 pages
First Design
No ratings yet
First Design
148 pages
Friday, 4 October 2024 8:11 Am
No ratings yet
Friday, 4 October 2024 8:11 Am
118 pages
Final-Staad Editor
No ratings yet
Final-Staad Editor
11 pages
Structural Apartment Removed
No ratings yet
Structural Apartment Removed
45 pages
VIga 1
No ratings yet
VIga 1
6 pages
4ce C Group 2 Truss Design
No ratings yet
4ce C Group 2 Truss Design
346 pages
STAAD - Pro Report BM 12: Job Information
No ratings yet
STAAD - Pro Report BM 12: Job Information
8 pages
Structural Calculation Report
No ratings yet
Structural Calculation Report
41 pages
Ps1 Truss Reports
No ratings yet
Ps1 Truss Reports
103 pages
Pedestrian Beam Staad Analysis & Design
No ratings yet
Pedestrian Beam Staad Analysis & Design
12 pages
Compapp Purlins
No ratings yet
Compapp Purlins
6 pages
BS Example - Steel
No ratings yet
BS Example - Steel
10 pages
Report of Telecom Tower
No ratings yet
Report of Telecom Tower
16 pages
Final Result
No ratings yet
Final Result
30 pages
Design Calculation For Steel Structures Support (Staad Design) Steel Supplier: Al Nahar Steel, Ajman
No ratings yet
Design Calculation For Steel Structures Support (Staad Design) Steel Supplier: Al Nahar Steel, Ajman
74 pages
Beam 2
No ratings yet
Beam 2
4 pages
Dwight A
No ratings yet
Dwight A
92 pages
2d Frame Without Sway-2
No ratings yet
2d Frame Without Sway-2
4 pages
Structure Analysis
No ratings yet
Structure Analysis
9 pages
Arana Building Frame Output File
No ratings yet
Arana Building Frame Output File
15 pages
Slabs Nalang Kulang RCDC
No ratings yet
Slabs Nalang Kulang RCDC
188 pages
2 Storey - Staad Analysis
No ratings yet
2 Storey - Staad Analysis
52 pages
Staad Space
No ratings yet
Staad Space
12 pages
STAAD - Pro Report BM 04: Job Information
No ratings yet
STAAD - Pro Report BM 04: Job Information
5 pages
RC Ej
No ratings yet
RC Ej
6 pages
Staad Mezzanine Design
No ratings yet
Staad Mezzanine Design
15 pages
12x6x6 Box Culvert Output
No ratings yet
12x6x6 Box Culvert Output
16 pages
Wednesday, 28 February 2024 1:37 PM: C:/Users/PCPAND 1/Desktop/LAFILI 1/la Filipina Staad - Anl
No ratings yet
Wednesday, 28 February 2024 1:37 PM: C:/Users/PCPAND 1/Desktop/LAFILI 1/la Filipina Staad - Anl
21 pages
Hot Barricade Design
No ratings yet
Hot Barricade Design
30 pages
Calculationsv 2
No ratings yet
Calculationsv 2
61 pages
STAAD ANALYSIS Sample
No ratings yet
STAAD ANALYSIS Sample
137 pages
CDSM 3
No ratings yet
CDSM 3
315 pages
VCB Raft
No ratings yet
VCB Raft
11 pages
Proposed Two Storey Residence Report
No ratings yet
Proposed Two Storey Residence Report
27 pages
C:/Users/ARNOLD/Desktop/mr and Mrs Castillo/staad/mr and Mrs Castillo - Anl
No ratings yet
C:/Users/ARNOLD/Desktop/mr and Mrs Castillo/staad/mr and Mrs Castillo - Anl
10 pages
Staad Analysis
No ratings yet
Staad Analysis
54 pages
Structural Analysis
No ratings yet
Structural Analysis
121 pages
2020-09-01 Genard Residential STAAD Output (Frame) 1.0.0
No ratings yet
2020-09-01 Genard Residential STAAD Output (Frame) 1.0.0
108 pages
Proposed Renovation of 2 Storey Residential
No ratings yet
Proposed Renovation of 2 Storey Residential
32 pages
V. ACI 318-11 Rectangular Singly Reinforced Beam
No ratings yet
V. ACI 318-11 Rectangular Singly Reinforced Beam
5 pages
C:/Users/ARNOLD/Desktop/acaardio Dela Cruz/staad/structure1.anl
No ratings yet
C:/Users/ARNOLD/Desktop/acaardio Dela Cruz/staad/structure1.anl
44 pages
Monday, August 19, 2019, 01:29 AM: Page 1 of 9 C:/Users/ECO CIVIL/Desktop/FINAL/SBR CHK/3.Actuator Frame - Anl
0% (1)
Monday, August 19, 2019, 01:29 AM: Page 1 of 9 C:/Users/ECO CIVIL/Desktop/FINAL/SBR CHK/3.Actuator Frame - Anl
9 pages
IBM System 360 RPG Debugging Template and Keypunch Card
From Everand
IBM System 360 RPG Debugging Template and Keypunch Card
Archive Classics
No ratings yet
013e Sizing Grease Interceptor NSPC
No ratings yet
013e Sizing Grease Interceptor NSPC
2 pages
Taxation Situational
No ratings yet
Taxation Situational
113 pages
Hyd Ref 5 0
No ratings yet
Hyd Ref 5 0
2 pages
1
No ratings yet
1
2 pages
Revised Application Form For Admission 2021 2022
No ratings yet
Revised Application Form For Admission 2021 2022
1 page
Structural Gen Notes and Specs
No ratings yet
Structural Gen Notes and Specs
1 page
CE Board Dec 2014 PDF
No ratings yet
CE Board Dec 2014 PDF
42 pages
Impact of Melting Polar Ice Caps
No ratings yet
Impact of Melting Polar Ice Caps
12 pages
Highway Components
No ratings yet
Highway Components
36 pages
Artificial Groundwater Recharge
No ratings yet
Artificial Groundwater Recharge
15 pages

PG Substructure

Uploaded by

PG Substructure

Uploaded by

Saturday, February 03, 2024, 04:37 PM

NUMBER OF JOINTS 36 NUMBER OF MEMBERS 44

SOLVER USED IS THE OUT-OF-CORE BASIC SOLVER

C:\Users\fierr\Desktop\Fierre\PROJECTS\PABLO GUTIERREZ\STAAD FILES\SUBSTRUCTURE\PG-SUBSTRUCTURE.anl Page 1 of 72

ORIGINAL/FINAL BAND-WIDTH= 26/ 7/ 30 DOF

C:\Users\fierr\Desktop\Fierre\PROJECTS\PABLO GUTIERREZ\STAAD FILES\SUBSTRUCTURE\PG-SUBSTRUCTURE.anl Page 2 of 72

ACI 318-11 BEAM NO. 1 DESIGN RESULTS

LEN - 3100. MM FY - 420. FC - 21. MPA, SIZE - 250. X 400. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

1 48. 2 - 16MM 0. 3100. YES YES

Cracked Moment of Inertia Iz at above location = 31521.3 cm^4

2 352. 3 - 16MM 0. 1981. YES NO

Cracked Moment of Inertia Iz at above location = 43579.4 cm^4

3 352. 3 - 16MM 1249. 3100. NO YES

Cracked Moment of Inertia Iz at above location = 43579.4 cm^4

REQUIRED REINF. STEEL SUMMARY :

0. 391./ 489. 48./ 60. 39/ 29

C:\Users\fierr\Desktop\Fierre\PROJECTS\PABLO GUTIERREZ\STAAD FILES\SUBSTRUCTURE\PG-SUBSTRUCTURE.anl Page 3 of 72

2067. 136./ 18. 17./ 2. 29/ 39

___1001J____________________ 3100X 250X 400_____________________1004J____

C:\Users\fierr\Desktop\Fierre\PROJECTS\PABLO GUTIERREZ\STAAD FILES\SUBSTRUCTURE\PG-SUBSTRUCTURE.anl Page 4 of 72

ACI 318-11 BEAM NO. 2 DESIGN RESULTS

LEN - 2000. MM FY - 420. FC - 21. MPA, SIZE - 250. X 400. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

1 48. 2 - 16MM 0. 1216. YES NO

Cracked Moment of Inertia Iz at above location = 31521.3 cm^4

2 48. 2 - 16MM 703. 2000. NO YES

Cracked Moment of Inertia Iz at above location = 31521.3 cm^4

3 352. 3 - 16MM 0. 2000. YES YES

Cracked Moment of Inertia Iz at above location = 43579.4 cm^4

REQUIRED REINF. STEEL SUMMARY :

0. 296./ 384. 37./ 48. 39/ 29

C:\Users\fierr\Desktop\Fierre\PROJECTS\PABLO GUTIERREZ\STAAD FILES\SUBSTRUCTURE\PG-SUBSTRUCTURE.anl Page 5 of 72

___1004J____________________ 2000X 250X 400_____________________1007J____

ACI 318-11 BEAM NO. 3 DESIGN RESULTS

LEN - 4175. MM FY - 420. FC - 21. MPA, SIZE - 250. X 400. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

1 48. 2 - 16MM 0. 4175. YES YES

Cracked Moment of Inertia Iz at above location = 31521.3 cm^4

C:\Users\fierr\Desktop\Fierre\PROJECTS\PABLO GUTIERREZ\STAAD FILES\SUBSTRUCTURE\PG-SUBSTRUCTURE.anl Page 6 of 72

2 352. 3 - 16MM 0. 1733. YES NO

Cracked Moment of Inertia Iz at above location = 43579.4 cm^4

3 352. 2 - 16MM 2268. 4175. NO YES

Cracked Moment of Inertia Iz at above location = 31521.3 cm^4

REQUIRED REINF. STEEL SUMMARY :

0. 51./ 492. 7./ 60. 39/ 29

C:\Users\fierr\Desktop\Fierre\PROJECTS\PABLO GUTIERREZ\STAAD FILES\SUBSTRUCTURE\PG-SUBSTRUCTURE.anl Page 7 of 72

___1007J____________________ 4175X 250X 400_____________________1012J____

ACI 318-11 BEAM NO. 8 DESIGN RESULTS

LEN - 3250. MM FY - 420. FC - 21. MPA, SIZE - 250. X 400. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

1 48. 2 - 16MM 0. 3250. YES YES

Cracked Moment of Inertia Iz at above location = 31521.3 cm^4

2 352. 2 - 16MM 0. 1501. YES NO

C:\Users\fierr\Desktop\Fierre\PROJECTS\PABLO GUTIERREZ\STAAD FILES\SUBSTRUCTURE\PG-SUBSTRUCTURE.anl Page 8 of 72

Cracked Moment of Inertia Iz at above location = 31521.3 cm^4

3 352. 2 - 16MM 1613. 3250. NO YES

Cracked Moment of Inertia Iz at above location = 31521.3 cm^4

REQUIRED REINF. STEEL SUMMARY :

0. 167./ 266. 21./ 34. 39/ 29

C:\Users\fierr\Desktop\Fierre\PROJECTS\PABLO GUTIERREZ\STAAD FILES\SUBSTRUCTURE\PG-SUBSTRUCTURE.anl Page 9 of 72

___1002J____________________ 3249X 250X 400_____________________1005J____

ACI 318-11 BEAM NO. 9 DESIGN RESULTS

LEN - 2150. MM FY - 420. FC - 21. MPA, SIZE - 250. X 400. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

1 48. 2 - 16MM 0. 654. YES NO

Cracked Moment of Inertia Iz at above location = 31521.3 cm^4

2 48. 2 - 16MM 1101. 2150. NO YES

Cracked Moment of Inertia Iz at above location = 31521.3 cm^4

3 352. 2 - 16MM 0. 2150. YES YES

C:\Users\fierr\Desktop\Fierre\PROJECTS\PABLO GUTIERREZ\STAAD FILES\SUBSTRUCTURE\PG-SUBSTRUCTURE.anl Page 10 of 72

Cracked Moment of Inertia Iz at above location = 31521.3 cm^4

REQUIRED REINF. STEEL SUMMARY :

0. 67./ 220. 9./ 28. 39/ 29

C:\Users\fierr\Desktop\Fierre\PROJECTS\PABLO GUTIERREZ\STAAD FILES\SUBSTRUCTURE\PG-SUBSTRUCTURE.anl Page 11 of 72

___1005J____________________ 2150X 250X 400_____________________1008J____

_1001J__ 3100X 250X 400_1004J

_1004J__ 2000X 250X 400_1007J

_1007J__ 4175X 250X 400_1012J

_1002J__ 3249X 250X 400_1005J

_1005J__ 2150X 250X 400_1008J

_1008J__ 4250X 250X 400_1013J

_1003J__ 3100X 250X 400_1006J

_1006J__ 2000X 250X 400_1010J

_1010J__ 4175X 250X 400_1014J

_1001J__ 3752X 250X 400_1002J