NRRICEv2 28/11/01 10:24 am Page 1

In-Car Entertainment
 In-Car Entertainment

Publication Part No. LRL 0455AUS

© Land Rover 2002

All rights reserved. No part of this publication may be reproduced, stored in a retrieval system or transmitted in any form, electronic, mechanical,
recording or other means without prior written permission from Land Rover.

As part of Land Rover environmental policy, this publication is printed on paper made from chlorine free pulp.
In-Car Entertainment (ICE) Handbook
For your convenience, this (ICE) handbook is divided into sections, each dealing with a different
aspect of the unit. These are listed on the title page and you will find it worthwhile to take a little
time to read each one, and get to know your ICE unit as soon as you possibly can.

The specification of each vehicle will vary according to territorial requirements and also from
model to model within the vehicle range. Some of the information published in this handbook,
therefore, may not apply to your particular vehicle.

*An asterisk appearing within the text, identifies features or items of equipment that are fitted
as options.

Land Rover operates a policy of constant product improvement and therefore reserves the right to change specifications
without notice at any time. Whilst every effort is made to ensure complete accuracy of the information in this handbook,
no liabilities for inaccuracies or the consequences thereof can be accepted by the manufacturer or the dealer, except in
respect of personal injury caused by the negligence of the manufacturer or the dealer.
 Contents

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
General Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Computer Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Radio Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Radio Reception . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Cassette Player Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Care of Cassette Player and Tapes . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Minidisc Player Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Single CD Player Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
CD Changer Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Caring for Compact and MiniDiscs . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Conformance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
 Introduction
The vehicle’s auxiliary fuel-burning heater and
Audio System Controls

THE SYSTEM
Introduction

Your ICE system offers many functions which independent ventilation control systems ensure
will make your journeys safer and more of a that a pleasant interior climate always awaits you
pleasure. when you enter the vehicle.

Your system has the following specification: ICE display cleaning

1. On-board computer. Clean the display only with a slightly moistened
2. Radio with cassette player. cloth.
Further equipment which can be specified: NOTE: Do not use chemical agents or any
1. Single play CD. domestic cleaning products as these could
2. Minidisc player. damage the display.
3. CD changer.
4. Digital sound processing system.
5. Code for engine interlock.
6. Auxiliary fuel-burning heater/independent
ventilation control.
Radio, cassette player, single play CD, minidisc
and CD changer operation are described in this
Handbook in later chapters.
If your vehicle is fitted with a multifunction
steering wheel, the controls on the wheel can
also be used to operate the radio and the CD
changer.
The radio and cassette player and CD players
ensure the best possible signal reception and
choice of audio entertainment. The DSP sound
system transports you to concert hall, jazz club
or cathedral and takes the monotony out of even
the longest journey.
The on-board computer calculates data relevant
to your journey, from average fuel consumption
and range to estimated time of arrival. It also
provides a warning if you have preset a speed
limit which is then exceeded.
An individual code number can be entered as an
additional safeguard against theft of your vehicle.
A GSM car phone means that you can always be
contacted and make outgoing phone calls.

4
 Introduction
UNIT CONTROLS

1 2 3 4 5 6

DOLBY B-C NR
TONE
ONE

14

m Radio 1 10 54AM AUDIO

UDIO DSP

1 2 3 4 5 6 FM AM RDS SC MODE TEL

13
7

ICE 1340
12 11 10 9 8

1. EJECT button 6. DSP button*

Press to eject installed media, Cassette, MiniDisc Press to change the display (3) for the DSP
(MD) or CD. (Digital Sound Processing) sound system with
the ignition switched on.
2. Media slot with dust flap
Insert media for playback into this slot. 7. Indicator light*
For Auxiliary heater/Independent ventilation
3. Display control.
Displays information on waveband, name of RDS On: Switch-on time programmed.
stations, programme, frequency, DSP sound Flashing: In operation.
memory, cassette, MD and CD functions, tone
settings, time and date. 8. Computer information
Press to access the computer functions.
4. TONE button
Press to alter settings for: Tone, 9. Clock
Speed-dependent volume control, Volume of Press to access setting functions for the digital
traffic reports, and Programme type display. clock.

5. AUDIO button 10. Function keys

Press to: Press to select functions from the display (11).
Change the display (3) from computer to audio
functions. 11. Function key display
Switch the radio on with the ignition switched off. Displays functions and options assigned to the
Change the display for tone control with the radio Function keys (10). These vary according to the
switched on. operating mode, i.e radio, cassette, MD, CD, tone
or computer.

5
 Introduction
12. On/Off/Volume - Rotary control
Press to turn on or turn off unit and rotate to
adjust volume setting.

13. Manual Station selection button

Press to enable a manual search of radio
frequencies. The search is performed in
predetermined frequency steps. The direction of
the search is dependent on which
Station/Title/Search button (14) is subsequently
pressed.

14. Station/Title/Search buttons

Press to:
Search and select radio stations by frequency or
by name.
Fast forward/rewind tape.
Music track search. (Cassette/MD/CD).

6
 Introduction
Multi-Information Display One or two functions can be displayed in each of
these six areas. The functions change according
Operating principle to the feature to which the display relates.
In addition to audio system control, this unit is The Function keys (10) are located below the
also used for setting the clock and computer Function key display (11).
functions. To perform a function, press the corresponding
The display (3) consists of two parts, the lower of Function key (10) at the right or left.
which (Function key display 14) is divided into If only one function is shown in the display, press
six areas. the key at either the right or left to activate.
NOTE: If the power supply is interrupted, all the
Radio 1 10 54AM
stored data is erased. After restoring the power
1 2 3 4 5 6 FM AM RDS SC MODE supply, the time and possibly also the switch-on
times for auxiliary heater/independent ventilation
control, distance and speed limit values must be
ICE1344 input again.
Example display for radio mode.

TAPE 1 10 54AM
SIDE DOLBY NR FM AM SC MODE

ICE1345

Example display for tape mode.

TR 01 10 54AM
1 2 3 4 5 6 FM AM RND SC MODE

ICE1346

Example display for MD/Single CD mode.

CD 1 03 10 54AM
1 2 3 4 5 6 FM AM RND SC MODE

ICE1347

Example display for CD Changer mode.

7
 General Operation
General Operation

GENERAL OPERATION
General Operation

Switch On/off SPEED VOL 3 10 54AM

Press the 'On/off, volume rotary control' (12). SVOL + PTY CLR MODE

The set selects the audio source last used

(Radio, MD, CD or Cassette).

Listening to Radio with the ignition ICE1348

switched off
With the ignition switched off, (ignition key Select the volume stage by pressing once or
turned to position 0 or removed), the radio holding the function key (10) below 'SVOL' (11).
functions remain available for approximately The volume stage selected appears in the display
20 minutes. (3).
When the ignition is switched off, the unit is also Exit by pressing the function key (10) below
switched off. 'MODE' (11).
To switch the unit on again, press the 'On/off,
volume rotary control' (12) or the 'Audio' button
Restoring the default volume settings
(5).
The default (centre) volume centre settings for
NOTE: The unit cannot be operated via the speed-dependent volume control can be
multifunctional steering wheel when the ignition restored.
is switched off. Press and keep depressed the 'TONE' button (4).
To protect the battery, you should always switch Restore the default by pressing the function key
off the radio when leaving the car. (10) below 'CLR' (11).
The default (centre) volume setting for the
Adjusting the volume speed-dependent volume control reset to stage
Turn the 'On/off, volume rotary control' (12). 3. If the programme type was switched on, it is
The volume is increased or decreased. de-activated.
Exit by pressing the function key (10) below
Adjusting speed-dependent volume 'MODE' (11).
control NOTE: Both functions and the activated
Your radio unit has speed-dependent volume programme type (PTY) cannot be reset
control (Speed Vol.) to compensate for the individually. When the ‘CLR’ key is pressed, all
higher level of noise inside the car at higher road settings are reset or de-activated.
speeds.
This feature raises the volume in line with your
car's speed.
You can adjust the rate of increase in volume in
six stages.
The higher the volume stage selected, the more
pronounced the increase in volume.
Press and keep depressed the 'TONE' button (4).

8
 General Operation
Activating the tone menu DSP sound system*
Press the 'Tone' (4) or 'Audio' (5) buttons to Digital Sound Processing (DSP), offers you the
activate the tone menu. optimum audio entertainment through its
simulated stereo sound and through its equaliser
functions.
BASS + 10 54AM DSP offers you three preset and three
BASS + TREB + FADR BAL LINEAR
individually adjustable sound memories.
The preset sound memories which simulate the
acoustics of the concert hall, jazz club and
church, are permanent and cannot be altered.
ICE1194
NOTE: It is not possible to alter the DSP tone
The following functions can be requested: settings while listening to the radio with the
Bass,Treble, Balance, Fader and Linear. ignition switched off.
To access a particular tone function, press the
function key (10) below the desired tone (11). Selecting a sound memory
Press the 'DSP' button (6).
Adjusting tone settings
Adjust the desired tone by pressing once or
holding the function key (10) (+ / -), (⇑ / ⇓) or
(⇐ / ⇒), until the required level is obtained. DSP OFF 10 54AM AUDIO
UDIO DSP

CONCERT JAZZCLUB CHURCH MEMORY 1 2 3 OFF TEL

Resetting the tone settings

'Linear' resets all tone settings for the current ICE1195
audio source to the central settings.
NOTE: The tone setting is specific to the audio Select from the permanent sound memory by
source, i.e. it can be adjusted separately for the pressing the function key (10) below 'CONCERT,
radio, cassette, MD and CD. JAZZ CLUB or CHURCH' (11).
When the audio source is changed, the tone Select an individual sound memory by pressing
settings last used for the new audio source are the function key (10) below 'MEMORY 1, 2 or 3'
established. (11).
To quit the sound memory function, press the
'Audio' button (5).
The selected memory setting is shown in the
display (3).

9
 General Operation
Modifying an individual sound memory Next, select the desired frequency band to be
You can modify sound memories 1 to 3 as adjusted with the appropriate function key (10).
preferred. Adjust the controls for 'Equaliser',
'Room' and 'Echo'.
MEMORY 1 80HZ +
NOTE: Adjustment of the sound via 'TONE' (4), 80 200 500 1K 2K 5K 12K + ROOM

may restrict the range of the individual sound

memories if the treble or bass settings are
extremely high or low.
To derive optimum benefit from the sound ICE1198

memories, you should first reset the tone

settings. (See previous page). Press the function key (10) under (+ / -), to adjust
to the required level.
Press the 'DSP' button (6).
Press the function key (10) below ‘MEMORY 1,2 Press the 'Audio' button (5) to store the settings
or 3’ (11). or the function key (10) below to cancel your
adjustment.

MEMORY 1 10 54AM NOTE: If one of the spatial controls (ROOM,

CONCERT JAZZCLUB CHURCH MEMORY 1 2 3 OFF SET ECHO) is set to 0, the second will automatically
also be set to zero.
As soon as you reset a memory which you have
previously zeroed, the other one also returns to
ICE1196 its previous setting. However, this is cancelled if
you reset both controls to zero.
To call up the adjustment menu, press the
function key (10) below 'SET' (11). Switching off the DSP function
To adjust the setting of the desired function e.g Press the 'DSP' button (6).
Equaliser, press the function key (10) below Press the function key (10) below 'OFF' (11).
'EQU' (11). Press the 'Audio' button (5) to exit the menu.

Key Memory - Memorising the settings

MEMORY 1 ECHO LEVEL + The memorised settings will be used each time
ECHO ROOM + EQU
the unit is switched on. However, each of your
remote handsets is capable of accessing a
different memory set, so allowing each user of
the vehicle to have individual preferences stored.
ICE1197
For further notes on Key Memory, see the
Owner's Handbook.
'Echo' and 'Room' functions can also be selected
at this point.

10
 General Operation
CLOCK Adjusting and setting the time
(Vehicles NOT equipped with Satellite Press the ‘CLOCK’ button (9).
Navigation).
NOTE: For safety reasons, only make inputs
while the vehicle is stationary. 1
12 : 00 AM AUDIO DSP

To display time or date DATE MEMO ON 24H SET TEL

Press the ‘CLOCK’ button (9).

2
Radio 1 10 54AM AUDIO
UDIO DSP

HEAT OFF 1 TIMER 2 DATE MEMO ON 24H SET TEL

12 : 55 AM
- HRS + - MIN + SET

ICE1349
3
The time can be displayed in 12 or 24 hour 5 : 55 PM
format and the date in imperial order. - HRS + - MIN + SET

To change the format, press the function key (10)

below ‘12H’ or ‘24H’ (11). (In 12-hour mode, AM
or PM appears after the time). 4
To display date, press the function key (10) 5 : 55 PM
below ‘DATE‘ (11). - HRS + - MIN + SET

ICE1315

Press the function key (10) below ‘SET’ (11).

To adjust the time, press or hold down the
function key (10) below ‘HRS’ or ‘MINS’ (11).
To set the time, press the function key (10) below
‘SET’ (11).
NOTE: When setting the time, this also adjusts
the time displayed on the analogue clock.

11
 General Operation
Adjusting and setting the date Stopwatch (Timer)
Press the ‘CLOCK’ button (9).
NOTE: The stopwatch functions are only
Press the function key (10) below ‘DATE’ (11)
available on vehicles WITHOUT an auxiliary
and then the function key (10) below ‘SET’ (11).
heater.
Press the ‘CLOCK’ button (9).
Radio 1 DATE 08/15/2001 Press the function key (10) below ‘TIMER’ (11).
MONTH DAY YEAR SET

Radio 1 TIMER 0 0 SEC

TIMER 1 TIMER 2 DATE MEMO ON SET

ICE1350

ICE1351
To adjust the date, press or hold down the
function key (10) below ‘DAY’, ’MONTH’ or
To start the stopwatch function, press the
‘YEAR’ (11).
function key (10) below ‘SET’ (11).
To set the date, press the function key (10) below
To take an intermediate time reading, press the
‘SET’ (11).
function key (10) below ‘TIMER’ (11).
By pressing this button again, the stopwatch
Reminder signal
display can be seen counting up; the stopwatch
An hourly reminder signal (MEMO), can be
continues to run.
programmed, to alert you, for example, to news
To stop the stopwatch, press the function key
broadcasts.
(10) below ‘SET’ (11).
Press the ‘CLOCK’ button (9).
To set the reminder signal, press the function key
NOTE: The stopwatch is stopped when the
(10) below ‘MEMO’ or ‘ON’ (11).
ignition key is turned back to 0, but starts to run
The signal occurs 15 seconds before each hour.
again when the ignition key is turned to 1.

12
 General Operation
Auxiliary heater/independent ventilation When the system is switched off, the LED (7)
control* goes out.
NOTE: The auxiliary heater/ventilation function To activate/de-activate the switch-on time, press
can only be accessed in ignition key position 1. TWICE the function button (10) below ‘1 TIMER
2’ (11).
Entering switch-on times
Two different switch-on times can be Direct switching on/off
programmed. After 30 minutes, the heating and Press the ‘CLOCK’ button (9).
ventilation shut down automatically. Press the function key (10) below ‘HEAT’ or ‘ON’
Press the ‘CLOCK’ button (9). (11).
Press the function key (10) below ‘1 TIMER 2’ Alternatively, press the function key (10) below
(11). Press the function key (10) below ‘SET’ ‘VENT’ or ‘OFF’ (11).
(11).

Radio 1 TIMER1 - - - -PM

HEAT OFF 1 TIMER 2 DATE MEMO ON 24H SET

ICE1352

To input the switch-on time, press or hold down

the function key (10) below ‘HRS’ or ‘MINS’ (11).
To set the switch-on time, press the function key
(10) below ‘SET’ (11).
The activated switch-on time is marked with an
asterisk.

Radio 1 *TIMER1 2 30PM

HEAT OFF 1 TIMER 2 DATE MEMO ON 24H SET

ICE1353

The switch-on times remain stored until

cancelled by a new input.
Switch-on times can be amended by entering a
new input time as above.
When the switch-on time is active, the LED (7) is
illuminated.
During actual operation of the
heating/ventilation, the LED (7) flashes.

13
 Computer Functions
Computer Functions

COMPUTER FUNCTIONS*
Computer Functions

DOLBY B-C NR
TONE
ONE

m CONS1 12.9 L/100KM AUDIO

UDIO DSP

1CONSUM2 RANGE DIST ARR SPEED LIMIT CODE SET TEL

ICE 1333
11 10 8

3. Display 10. Function Keys

Displays information on waveband, name of RDS Press to select functions from the display (11).
stations, programme, frequency, DSP sound
memory, cassette, MD and CD functions, tone 11. Function Key Display
settings, time and date. Displays functions and options assigned to the
Function keys (10). These vary according to the
8. Computer information operating mode, i.e radio, cassette, MD, CD, tone
Press to access the computer functions. or computer.

14
 Computer Functions
COMPUTER FUNCTIONS*
Selecting units of measurement Radio 1 LIMIT KM
0 1 2 3 4 5 6 7 8 9 CLR SET
NOTE: For safety reasons, make inputs only
while the vehicle is stationary.
The computer calculates and memorises data ICE1335

from the start of the journey onwards.

Information can be displayed either in metric or To adjust or correct the setting, press the
imperial units of measurement. function key (10) below ‘CLR’(11) and repeat the
above process.
Press the ‘COMPUTER INFORMATION’ button To store the speed limit value, press the function
(8). key (10) below ‘SET’ (11).
Press the function key (10) below ‘MLS’ or ‘KMS’ As an alternative to the above method for setting
(11) to select the desired measurement units. the speed limit, it is possible to store the actual
‘Real time’ speed directly into the unit.
Speed limit Press the ‘COMPUTER INFORMATION’ button
In this function, a signal can be programmed to (8).
alert the driver (both audible and visual) when Press the function key (10) below ‘LIMIT’ (11).
the preset speed has been exceeded. To store the speed limit value, press TWICE the
The speed limit reminder is only repeated if the function key (10) below ‘SET’ (11).
vehicle has in the meantime been driven at least
5 km/h slower. De-activating the speed limit
Press the ‘COMPUTER INFORMATION’ button
Adjusting and setting the speed limit (8).
Press the ‘COMPUTER INFORMATION’ button Press the function key (10) below ‘LIMIT’ (11).
(8). The ‘LIMIT’ display disappears, but the stored
Press the function key (10) below ‘LIMIT’ (11). value can be re-activated by pressing the
function key (10) below ‘LIMIT’ (11).

LIMIT KM
1CONSUM2 RANGE DIST ARR SPEED LIMIT CODE SET
Distance from destination
If, before starting your journey, the overall trip
distance is input, then the remaining trip distance
is displayed.
ICE1334

Press the function key (10) below ‘SET (11).

To input the desired speed limit, press the
function keys (10) below the required digits (11).

15
 Computer Functions
Adjusting and setting distances Range
Press the ‘COMPUTER INFORMATION’ button The distance which the vehicle should cover on
(8). the remaining fuel in the tank can be displayed.
Press the function key (10) below ‘DIST’ (11). To display the probable range, press the
‘COMPUTER INFORMATION’ button (8).
Press the function key (10) below ’RANGE’ (11).
DIST KM
1CONSUM2 RANGE DIST ARR SPEED LIMIT CODE SET NOTE: If the range falls below 50 km, add fuel to
the tank to avoid the risk of damage to the engine
or catalytic converter.
The computer only registers added fuel in excess
ICE1336 of 6 litres.

Press the function key (10) below ‘SET’ (11).

To input the desired distance, press the function RANGE 235 KM
1CONSUM2 RANGE DIST ARR SPEED LIMIT CODE SET
keys (10) below the required digits (11).

Radio 1 DIST KM
1 2 3 4 5 6 7 8 9 0 CLR SET ICE1338

ICE1337 Fuel consumption

The average fuel consumption can be calculated
To adjust or correct the setting, press the and displayed for two different distances, e.g. for
function key (10) below ‘CLR’ (11) and repeat the a complete journey and part of that journey.
above process. With the engine running, press the ‘COMPUTER
To store the distance value, press the function INFORMATION’ button (8).
key (10) below ‘SET’ (11). Press either end of the function key (10) below
It is possible to check the stored value at any ‘1 CONSUM 2’ (11).
time.
Press the ‘COMPUTER INFORMATION’ button
CONS1 12.9 L/100KM
(8). 1CONSUM2 RANGE DIST ARR SPEED LIMIT CODE SET
Press the function key (10) below ‘DIST’ (11).

Estimated time of arrival

When the overall trip distance is input, an
estimated time of arrival at your destination can ICE1339

be displayed. This estimate is continuously

updated by the computer as your journey The average fuel consumption over distance 1 or
progresses. 2 (whichever is selected) is displayed.
To display the estimated time of arrival, press the To restart the fuel consumption calculation,
‘COMPUTER INFORMATION’ button (8). press either end of the function key (10) below
Press the function key (10) below ‘ARR’ (11). ‘1 CONSUM 2’ (11).
Press the function key (10) below ‘SET’ (11).

16
 Computer Functions
Speed
The average speed of the vehicle can be
CODE
calculated and displayed. 0 1 2 3 4 5 6 7 8 9 CLR SET
With the engine running, press the ‘COMPUTER
INFORMATION’ button (8).
To display the average speed, press the function ICE1298
key (10) below ‘SPEED’ (11).
To correct or store the entry
ARRIVAL 13 46PM To correct the entry, press the function key (10)
1CONSUM2 RANGE DIST ARR SPEED LIMIT CODE SET below ‘CLR’ (11) and repeat the input.
To store the input, press the function key (10)
below ‘SET’ (11), then return the ignition key to
position 0.
ICE1372

De-activating the code

To recalculate the average speed, press the When prompted to enter the code (ignition key in
function key (10) below ‘SET’ (11). position 1 or 2), input the figures using the
function keys (10) below the required digits (11).
Extended immobiliser function Press the function key (10) below ‘SET’ (11).
With the ignition key in position 1 or 2, a code After the code has been input correctly and
can be entered. The code must be input on future confirmed with ‘SET’, the time display appears.
occasions before the engine can be started.
After three incorrect code inputs, or three
If you have mislaid or forgotten the code, the
attempts to start the engine without a code input,
emergency de-activation procedure will have to
the alarm will sound for 30 seconds on vehicles
be carried out to immobilise the ignition system.
fitted with an alarm.
Selecting and activating the code Interlock code - emergency deactivation
Press the ‘COMPUTER INFORMATION’ button
If your code is no longer available to you, there is
(8).
an emergency procedure that will delete the code
Press the function key (10) below ‘CODE’ (11).
and allow the engine to be restarted.
Enter the required number by pressing the
function key (10) below the digits (11). Follow the instructions in your Owner’s
Handbook and disconnect the earth terminal of
the vehicle battery.
After at least one minute, reconnect the battery.
At this point the alarm will sound so be sure to
have the remote handset available to turn it off.
The vehicle systems will reset. See your Owner’s
Handbook regarding system resetting after
battery disconnection.

17
 Computer Functions
Turn the starter switch to position ‘II’. The
on-board computer will display a 10 minute
counter. When the 10 minute count is
completed, the engine can be started and a new
code activated, if required.
NOTE: The starter switch MUST remain in
position ‘II’ throughout the 10 minute count.

Remote control
The silver button at the end of the direction
indicator stalk can be used to select the
computer information. When computer
functions are called up, the message centre in the
instrument pack will also display the information.
1. Press the button at the end of the stalk until
the ICE display shows ‘PROG 1’.
2. Press the function keys (10) in the order in
which the computer functions are to be H4747

displayed. Further options are displayed by

pressing the clock button (9). To select
‘CLOCK’ as one of the display options, press
the clock button again.
Each time a computer function is stored, the
program number appears on the ICE
display.
To terminate the selection procedure, press the
function key (10) below ‘SET’ (11).

To have all the available information displayed:

1. Press the button at the end of the stalk until
the ICE display shows ‘PROG 1’.
2. Press the function key (10) below ‘SET (11).
To display individual items of computer
information, press the silver button at the end of
the direction indicator stalk repeatedly until the
relevant statistic is displayed.

18
 Radio Operation
RADIO CONTROLS
Radio Operation

3 4

DOLBY B-C NR
TONE
ONE

14

m Radio 1 10 54AM AUDIO

UDIO DSP

1 2 3 4 5 6 FM AM RDS SC MODE TEL

13

ICE1354
12 11 10

3. Display 12. On/Off/Volume - Rotary control

Displays information on waveband, name of RDS Press to turn on or turn off unit and rotate to
stations, programme, frequency, DSP sound adjust volume setting.
memory, cassette, MD and CD functions, tone
settings, time and date. 13. Manual Station Selection Button
Press to enable a manual search of radio
4. TONE Button frequencies. The search is performed in
Press to alter settings for: Tone, predetermined frequency steps. The direction of
Speed-dependent volume control, Volume of the search is dependent on which
traffic reports, and Programme type display. Station/Title/Search button (14) is subsequently
pressed.
10. Function keys
Press to select functions from the display (11). 14. Station/Title/Search Buttons
Press to:
11. Function Key Display Search and select radio stations by frequency or
Displays functions and options assigned to the by name.
Function keys (10). These vary according to the Fast forward/rewind tape.
operating mode, i.e radio, cassette, MD, CD, tone Music track search. (Cassette/MD/CD).
or computer.

19
 Radio Operation
Selecting Waveband RDS data can, however, only be registered if
To select the required waveband, press the reception conditions are good. Where reception
function key (10) below 'FM AM' (11). is poor or in the event of interference, the station
name may take some time to appear in the
Selecting stations by frequency display.
To select a station, switch on RDS by pressing
Manual station selection the function key (10) below 'RDS' (11).
Press the manual station selection key (13).
'm' appears in the display (3) next to the '*RDS' appears in the key display (11) , together
frequency display or station name. with the name of the current station in the display
To adjust the frequency, press once or hold (3) if it broadcasts RDS information.
pressed in the station search key (14).
Each time the key is pressed, the frequency is
Radio 1 10 54AM
changed by a predetermined amount. 1 2 3 4 5 6 FM AM RDS SC MODE

Search for station (Search)

Press once or hold pressed in the station search
key (14). ICE1355
The search begins at the last selected frequency
and stops as soon as a station is found. To start the search, press once or hold pressed
in the station search key (14). The search begins
Selecting stations by name from the station last selected. The search stops
RDS - Radio Data System. as soon as a station is found.
The limitations from which all mobile radio
receivers suffer are compensated for in part by a To switch off RDS, press the function key (10)
variety of ingenious systems: below 'RDS' (11).
The Radio Data System (RDS) broadcasts
additional information on the FM (VHF)
waveband.
RDS stations therefore offer the following
features:
• Where a radio station is broadcast on several
frequencies, your radio set automatically
switches to whichever frequency offers the
best reception.
• Once the RDS signals have been processed,
the station name appears in the display.
• Additional information can be shown or called
up in the display (e.g announcements in text
form broadcast by the station).

20
 Radio Operation
Sampling and selecting (Scan) Each time you tune to a different station, or if the
You can play a brief sample of all receivable type of programme being broadcast changes, the
stations. new details are automatically displayed (3) for a
Start sampling by pressing the function key (10) few seconds, e.g. 'CULTURE' for a cultural
below 'SC' (11). programme.

Switching off PTY

Radio 1 SC 10 54AM Press the 'TONE' key (4) and keep pressed in
1 2 3 4 5 6 FM AM RDS SC MODE
until a 'PTY' graphic appears in the display (11).
Switch off PTY by pressing the function key (10)
below 'PTY' (11).
ICE1356

PTY OFF 10 54AM

The display (3) shows the station currently SVOL + PTY CLR MODE

selected.
To retain the station currently displayed, press
the function key (10) below 'SC' (11) and the
ICE1357
scan function is halted.
Alternatively, press the function key (10) below
Programme type (PTY)
'CLR' (11) to restore the default settings.
Further information can also be received via
To exit the function, press the function key (10)
RDS. Certain stations broadcast details of the
below 'MODE' (11).
programme type (PTY), e.g news, sports, pop,
culture, etc. NOTE: When you use the CLR key to exit the
If reception is poor or if there is considerable function, as well as PTY being switched off, the
interference, it may take some time for the PTY SVOL and TP MIN functions are reset to their
details to be available. default settings. (See 'Restoring the default
settings').
NOTE: PTY can also be used for disaster
warnings. If the station is broadcasting this type
of programme, 'ALARM' appears in the display.

Calling up programme type

Switch on RDS if necessary by pressing the
function key (10) below 'RDS' (11).
Next press the 'TONE' key (4) and keep pressed
in until 'PTY' appears in the display (11).
Switch on PTY by pressing the function key (10)
below 'PTY' (11).
Continue pressing this key until 'PTY AUTO'
appears in the display (3).
To exit the function, press the function key (10)
below 'MODE' (11).

21
 Radio Operation
Memorising and calling up stations Calling up a station
To select a waveband press the function key (10)
Memory locations below 'FM AM' (11).
Your radio can memorise 42 stations: Each time you press the key, you can change the
• You can memorise 12 stations of your choice waveband within the FM and AM memory levels.
on the FM (VHF) waveband, and six stations Press the function key below the desired
of your choice on the MW waveband (keys memorised station graphic. (1-6 or 7-12).
1-12 and 1-6 respectively), see ‘Memorising
stations’, page 22.
• The radio can also automatically memorise
the six stations with the strongest reception
signal on each of the FM (VHF) and MW
wavebands, see ‘Memorising stations’,
page 22.
The fact that there are various memory levels
means that more than one station is stored on
each function key.
NOTE: Memory locations 1-12 on the FM (VHF)
waveband are called up in two blocks. Keys 1-6
are accessed with the first press and keys 7-12
with the second press.

Selecting waveband
Press the function key (10) below 'FM AM' (11).
Each time you press the key, you switch between
the FM (1-12) and FM (A1-A6) memory levels, or
the MW (1-6) and MW (A1-A6) memory levels.

Memorising stations
Press the function key (10) below 'FM AM' (11).
Each time you press the key, you change
waveband within the FM and AM memory levels.
Select station by frequency or name.
Memorise stations by pressing the desired
function key (1-6 or 7-12) at the left or right and
hold it down until the station is broadcast again
after a brief interruption. The station is now
memorised.
The selected key number is identified by an
asterisk *.
If a station was already stored on that key, details
of the previous station are displayed briefly, then
the frequency of the new station or, if RDS is
switched on, the name of the new station.

22
 Radio Operation
Automatic memorising Switching to MD, CD or Cassette
The automatic memorising feature Press the function key (10) below 'MODE' (11)
(AUTOSTORE) is useful if, for example, you repeatedly until the display changes to the
would like to find whichever station currently desired audio source (MD, CD or cassette). If
offers the strongest reception signal when you there is an MD, CD or cassette in the unit, the
are on a long journey. audio source switches to:
On the FM and MW memory levels, the 6 stations
MD Replay. (See ‘Starting and stopping an MD’,
with the strongest reception signals can be
page 30).
memorised automatically.
CD Replay. (See ‘Starting and stopping a CD’,
Hold in the function key (10) below 'FM AM' (11), page 33).
the display (11) shows the 'AUTOSTORE' menu. Cassette Replay. (See ‘Starting and stopping a
Cassette’, page 26).

AUTOSTORE 10 54AM
A1 A2 A3 A4 A5 A6 FM AM RDS SC MODE

ICE1358

The radio automatically switches to the FM or

MW memory level.
The six stations currently offering the strongest
reception signals are automatically stored and
the station that is stored under key A1 is
broadcast.
NOTE: If you do not wish to use AUTOSTORE,
you can store six further stations of your own
choice on each of the FM and MW memory
levels. (See ‘Memory locations’, page 22).

23
 Radio Reception
Radio Reception

ICE 0222

RADIO RECEPTION
Distortion, interference and lack of signal clarity, While RDS automatic retuning eases this
are often attributed to a fault in the radio - this is problem, some manual retuning may still be
rarely the case. needed (especially for local stations) in areas of
weak reception.
Problems of this kind are usually caused by
phenomena such as atmospheric conditions, The broadcast range for good stereo reception
signal strength, hilly terrain, tall buildings, (usually within a 50 to 65 kilometresradius of the
bridges and even electrical interference from transmitter) is noticeably less than it is for mono.
power lines.
FM Signals (like light waves) travel in a straight
Please remember: A car radio receives signals line, so large obstacles, such as tall buildings,
while the vehicle is in motion (unlike a domestic can shield the car from the signal causing
set) - constantly changing direction and moving distortion or loss of reception (known as dead
away from, or nearer to, the transmitter whilst spots).
negotiating terrain with widely differing reception
Distortion can also occur if FM signals received
characteristics. Some interference is to be
directly from the transmitter mix with signals
expected from time to time.
which have been reflected by obstructions such
FM transmitters can only broadcast over a as mountains, hills and tall buildings (this is
limited range and good, clear signals will only be known as multi-path distortion).
received in the immediate area of the transmitter.
When travelling, it may be necessary to re-tune
the radio from time to time, to offset the effects
of moving from one transmitter area to another.

24
 Cassette Player Operation
CASSETTE PLAYER CONTROLS
Cassette Player Operation

1 2 3

DOLBY B-C NR
TONE
ONE

14

m TAPE 1 10 54AM AUDIO

UDIO DSP

SIDE DOLBY NR FM AM SC MODE TEL

13

ICE1359
11 10

1. EJECT Button 13. Manual Station selection Button

Press to eject installed media, cassette, MD or Press to enable a manual search of radio
CD. frequencies. The search is performed in
predetermined frequency steps. The direction of
2. Media slot with dust flap the search is dependent on which
Insert media for playback into this slot. Station/Title/Search button (14) is subsequently
pressed.
3. Display
Displays information on waveband, name of RDS 14. Station/Title/Search Buttons
stations, programme, frequency, DSP sound Press to:
memory, cassette, MD and CD functions, tone Search and select radio stations by frequency or
settings, time and date. by name.
Fast forward/rewind tape.
10. Function keys Music track search. (Cassette/MD/CD).
Press to select functions from the display (11).

11. Function Key Display

Displays functions and options assigned to the
Function keys (10). These vary according to the
operating mode i.e radio, cassette, MD, CD, tone
or computer.

25
 Cassette Player Operation
Starting and stopping a Cassette Music Search
Starting Activate music search by pressing the left or
1. Switch unit on. (See ‘Switch On/off’, page 8). right arrow key (14). The tape will be wound
2. Push the tape cassette fully into the slot (2) forwards/backwards until the next/previous track
with the tape openings at the right. is detected. At the end of the tape, it switches
The display (3) shows 'TAPE 1' and play automatically to the other side.
commences. To interrupt the fast forward/rewind movement,
If there is already a tape cassette in the slot (2): press the left or right arrow key (14) or the 'M'
Press the function key (10) below 'MODE' (11) key (13).
repeatedly until 'TAPE' appears in the display (3).
NOTE: The music search can only function if
Select the side (if necessary) by pressing the
there are breaks of at least four seconds between
function key (10) below 'SIDE' (11).
the tracks on the tape.
Stopping
Reminder displays
Press the cassette eject button (1).
If reproduction is distorted, the cause is usually
The cassette is ejected a short way out of the tape
a tape which does not run freely.
slot (2) and the audio source switches to radio
If the tape in a cassette cannot be moved, ‘TAPE
(FM).
ERROR’ appears in the display:
Alternatively, switch off unit, (See ‘Switch
On/off’, page 8) or switch to Radio or CD
Changer. TAPE ERROR 10 54AM
Press the function key (10) below 'MODE' (11) SIDE DOLBY NR FM AM SC MODE

repeatedly until 'RADIO' or 'CD' appears in the

display (3).
The audio source switches directly to: ICE1360
Radio. (See ‘Selecting Waveband’, page 20).
CD Changer, if a CD is inserted. (See ‘Starting To avoid possible damage:
and stopping a CD’, page 33). Press the cassette eject button (1) until the
cassette is ejected, then immediately remove the
Music track search cassette from the tape slot (2).
Fast forward/Rewind Turn one of the tape reels, e.g. with a ball pen or
Press the left or right arrow (14) key twice similar, to wind any loose tape back into the tape
briefly. reels.
Alternatively, press the 'M' key (13) followed by Insert the cassette in the tape slot (2) again and
the left or right arrow keys (14) dependant upon wind it fully forwards and back again to ensure
desired direction. that the tape is wound evenly on the reels .
The tape switches automatically to the other side If 'TAPE ERROR' appears in the display (3) again,
when the end is reached. eject the tape and do not use it in the cassette
To interrupt the fast forward/rewind movement, player again.
press the left or right arrow key (14) or the 'M'
key (13).

26
 Cassette Player Operation
Noise reduction**
Dolby B and C are noise reduction systems for
cassette replay.
High frequencies are raised during recording and
attenuated during replay.
As audio hiss consists mainly of high
frequencies and occurs above all during replay, it
is reduced in this way.

Switching Dolby on/off

NOTE: Only switch this on if you are using
cassettes recorded with Dolby B or Dolby C, as
reproduction will otherwise sound dull.
Press the function key (10) below 'DOLBY NR'
(11) until the best reproduction quality is
obtained.
Pressing the key alternates between Dolby B,
Dolby C and Dolby noise suppression system
switched off.
The noise suppression mode selected is
indicated in the display (3) by:
'DOLBY B NR', 'DOLBY C NR' or 'NR OFF'.

**Noise reduction manufactured under license.

Dolby and the ‘DD’ symbol are registered trade marks
of Dolby Laboratories Licensing Corporation.

27
 Care of Cassette Player and Tapes
Care of Cassette Player and Tapes

ICE 0054

CARE OF CASSETTE PLAYER AND TAPES

Use only good quality tapes with a maximum Cassette tapes
capacity of ninety minutes (C90). Check that both • Always store cassettes in their boxes when
spools rotate freely and remove any loose turns not in use.
at the start of the tape by winding one spool with
• Never leave cassettes in the vehicle during
a pen or pencil.
extremes of temperature. In particular, do not
leave tapes in direct sunlight as they may
Cassette player
warp and become unusable, or jam the tape
In use, the tape head accumulates dust and
player mechanism.
contamination, gradually impairing sound
reproduction and, in extreme cases, reducing • Fast forward, or rewind tapes every 8 to 10
volume too. To combat contamination, clean the plays to prevent them from becoming too
tape head periodically (after approximately every tightly wound.
20 hours playing time) by passing a wet type • Ensure that labels attached to the cassette are
cleaning cassette through the player. glued firmly in place.
NOTE: Because your cassette player is fitted with • DO NOT leave tapes in the cassette player for
auto reverse, the cleaning cassette must be more than a few hours in very cold or humid
played in both directions. conditions - the oxides on the tape surface
may contaminate the cassette player
The tape will require more frequent cleaning in mechanism.
winter, as contamination is greater in conditions
of low temperature and increased humidity. NOTE: After continuous playing, cassettes may
However, the use of good quality tapes keeps the become hot to touch.This is normal and will not
build up to a minimum. harm good quality tape.

28
 Minidisc Player Operation
MINIDISC PLAYER CONTROLS
Minidisc Player Operation

3 2 1

TONE

14

m TR 01 10 54AM AUDIO
UDIO DSP

1 2 3 4 5 6 FM AM RND SC MODE TEL

ICE1361
11 10

1. EJECT Button 11. Function Key Display

Press to eject installed media, cassette, MD or Displays functions and options assigned to the
CD. Function keys (10). These vary according to the
operating mode, i.e radio, cassette, MD, CD, tone
2. Media slot with dust flap or computer.
Insert media for playback into this slot.
14. Station/Title/Search Buttons
3. Display Press to:
Displays information on waveband, name of RDS Search and select radio stations by frequency or
stations, programme, frequency, DSP sound by name.
memory, cassette, MD and CD functions, tone Fast forward/rewind tape.
settings, time and date. Music track search. (Cassette/MD/CD).

10. Function keys

Press to select functions from the display (11).

29
 Minidisc Player Operation
Starting and stopping an MD Music track search
Starting Track search
1. Switch unit on. (See ‘Switch On/off’, page 8). Select the direction of search by pressing the
2. Insert the MD in the MiniDisc slot (2) with the right or left arrow key (14) until the desired track
arrow upwards and pointing towards the player. is obtained.
The MD starts to play from the selected track.
If there is already an MD in the MiniDisc slot (2):
Start to play the disc by pressing the function key
Fast forward/reverse
(10) below 'MODE' (11) until 'TR' appears in the
Select the direction by keeping depressed the
display (3).
right or left arrow key (14). The tracks can be
heard, but the quality is distorted.
TR 01 10 54AM To interrupt Fast forward/Reverse, release the
1 2 3 4 5 6 FM AM RND SC MODE key. The MD starts to play from the selected
point.

Sampling and selecting (Scan)

ICE1362 All tracks on the MD can be automatically
sampled briefly in succession.
NOTE: As the player first needs to read in data Press the function key (10) below 'SC' (11) to
from the MD, there is a slight delay before it start sampling.
starts to play.

Stopping TR 01 SC 10 54AM
1 2 3 4 5 6 FM AM RND SC MODE
Press the MD eject button (1).
The MD is ejected a short way out of the MiniDisc
slot (2) and the audio source switches to radio
(FM)
or switch off the unit, (See ‘Switch On/off’, ICE1363

page 8) or switch to radio or CD Changer.

Press the function key (10) below 'MODE' (11) To select a track, press the function key (10)
until the display line changes to the desired audio below 'SC' (11).
source (Radio or CD changer). The scan function is interrupted and the MD
The audio source switches directly to: plays from the point reached.
Radio. (See ‘Selecting Waveband’, page 20).
CD Changer. (See ‘Starting and stopping a CD’,
page 33).

Reminder Displays
NO DISC - The MiniDisc slot is empty.
MD ERROR - The MD cannot be read or is
damaged.

30
 Minidisc Player Operation
Random Play
The tracks on the MD can be played in an entirely
random order.
Press the function key (10) below 'RND' (11).
The display (3) shows 'RND' and the number of
the track on the MD.

TP MIN 3 10 54AM
SVOL + PTY CLR MODE

ICE1364

NOTE: You can operate the buttons for skipping

tracks and fast forward/rewind during random
play. This enables you to skip a track that you do
not want to listen to.

Stopping random play

Press the function key (10) below 'RND' (11).
The random play function is interrupted and the
MD plays from the point reached.

31
 Single CD Player Operation
SINGLE CD PLAYER CONTROLS
Single CD Player Operation

3 2 1

TONE

14

m TR 01 10 54AM AUDIO
UDIO DSP

1 2 3 4 5 6 FM AM RND SC MODE TEL

ICE1365
11 10

1. EJECT Button 11. Function Key Display

Press to eject installed media, cassette, MD or Displays functions and options assigned to the
CD. Function keys (10). These vary according to the
operating mode, i.e radio, cassette, MD, CD, tone
2. Media slot with dust flap or computer.
Insert media for playback into this slot.
14. Station/Title/Search Buttons
3. Display Press to:
Displays information on waveband, name of RDS Search and select radio stations by frequency or
stations, programme, frequency, DSP sound by name.
memory, cassette, MD and CD functions, tone Fast forward/rewind tape.
settings, time and date. Music track search. (Cassette/MD/CD).

10. Function keys

Press to select functions from the display (11).

32
 Single CD Player Operation
Starting and stopping a CD Fast forward/reverse
Starting Select the direction by keeping depressed the
1. Switch unit on. (See ‘Switch On/off’, page 8). right or left arrow key (14). The tracks can be
2. Insert the CD into the CD slot (2) with the label heard, but the quality is distorted.
side uppermost. To interrupt Fast forward/Reverse, release the
key. The CD starts to play from the selected
If there is already a CD in the slot (2): point.
Start to play the disc by pressing the function key
(10) below 'MODE' (11) until 'TR' appears in the
Sampling and selecting (Scan)
display (3).
All tracks on the CD are automatically sampled
briefly in succession.
TR 01 10 54AM Press the function key (10) below 'SC' (11) to
1 2 3 4 5 6 FM AM RND SC MODE start sampling.

TR 01 SC 10 54AM
1 2 3 4 5 6 FM AM RND SC MODE
ICE1366

Stopping
Press the CD eject button (1). ICE1367
The CD is ejected a short way out of the CD slot
(2) and the audio source switches to radio (FM) To select a track, press the function key (10)
or switch off the unit, (See ‘Switch On/off’, below 'SC' (11).
page 8). or switch to radio or CD changer. The scan function is interrupted and the CD plays
Press the function key (10) below 'MODE' (11) from the point reached.
until the display line changes to the desired
audio source (Radio or CD Changer).
The audio source switches directly to:
Radio. (See ‘Selecting Waveband’, page 20).
CD changer. (See ‘Starting and stopping a CD’,
page 33).

Reminder Displays
NO DISC - The CD slot is empty.
CD ERROR - The CD has been inserted upside
down or is damaged.

Music track search

Track search
Select the direction of search by pressing the
right or left arrow key (14) until the desired track
is obtained.
The CD starts to play from the selected track.

33
 Single CD Player Operation
Random Play
The tracks on the CD are played in an entirely
random order.
Press the function key (10) below 'RND' (11) and
the display (3) shows 'RND' and the number of
the track on the CD.

TR 01 RND 10 54AM
1 2 3 4 5 6 FM AM RND SC MODE

ICE1368

NOTE: You can operate the buttons for skipping

tracks and fast forward/reverse during random
play. This enables you to skip a track that you do
not want to listen to.

Stopping random play

Press the function key (10) below 'RND' (11).
The random play function is interrupted and the
CD plays from the point reached.

34
 CD Changer Operation
CD Changer Operation

Locating the CD Changer

The CD changer for six CDs is installed in the
glovebox compartment.

Removing the CD magazine

To load or empty it, the CD magazine has to be
removed from the CD changer.

ICE1207
ICE1206

To empty: Pull out the appropriate holder as

Slide the access panel to the right and press the
illustrated and remove the CD.
magazine eject button.
NOTE: You are recommended not to play CD
singles with an adapter. The CDs or the adapter
could jam in the CD changer.
Suitable magazines for CD singles can be
obtained from shops.

ICE1205 Inserting the CD magazine

The magazine will slide out and can then be

removed.

Filling/Emptying the CD magazine

NOTE: When adding CDs to or removing them
from the CD magazine, hold them only at the
edge and do not touch the reflective sensing
area.
The CD compartments in the changer have the
same numbers as the CD selector buttons on the
radio. ICE1208
To load: Insert the CD into a compartment with
the label side uppermost. Slide the access panel to the right and with the
arrow pointing towards the CD changer, push the
CD magazine fully in and close the access panel.

35
 CD Changer Operation
Operating temperatures Stopping
NOTE: Only use the CD changer at temperatures Switch unit off, (See ‘Switch On/off’, page 8) or
between -15° C and +60° C, otherwise it may switch to radio, MD or cassette:
malfunction. Press the function key (10) below 'MODE' (11)
Even when switched off, the unit should not be repeatedly until the display line changes to the
exposed to temperatures beyond -25° C and desired audio source (radio, MD or cassette).
+85° C. The audio source switches directly to:
Radio. (See ‘Selecting Waveband’, page 20).
Atmospheric humidity Cassette replay (If a cassette is inserted), See
A high level of humidity inside the device may ‘Starting and stopping a Cassette’, page 26.
cause the laser beam focusing lens to fog over MD Replay (If an MD is inserted), See ‘Starting
and prevent the CD from being played. and stopping an MD’, page 30.

Precautions when using Laser equipment Reminder displays

The CD changer is officially designated a Class 1 NO DISCS - The magazine is empty.
laser product. NO MAGAZINE - No magazine has been inserted.
CD CHECK - The contents of the CD are still being
NOTE: Do not remove the cover from the read in.
housing. Never run the device if its cover is HIGH TEMP - Operating temperature is too high.
damaged, otherwise the invisible laser beam When the temperature drops to normal, replay
could cause serious eye injuries. will continue automatically.
Repairs or maintenance work must only be
carried out by qualified service experts.
Music track search
Selecting a CD
Starting and stopping a CD
Press the key (10) below the desired CD number
Starting (11). (At the left or right).
Press the function key (10) below 'MODE' (11) The corresponding CD number is shown in the
repeatedly until the display (3) changes to the CD display (3).
mode. Replay starts with the first track on the CD.
At the end of the final track, the next CD is
CD 1 03 10 54AM
selected and played.
1 2 3 4 5 6 FM AM RND SC MODE

Track search
Select the direction of search by pressing the
right or left arrow key (14) until the desired track
ICE1369 is obtained.
The CD starts to play from the selected track.
If replay was previously interrupted, it will begin
playing again at the same point after a few Fast forward/Rewind
seconds. Select the direction by keeping depressed the
right or left arrow key (14). The tracks can be
NOTE: If the CDs in the magazine have been
heard, but the quality is distorted.
changed, the CD in the lowest compartment
To interrupt Fast forward/Rewind, release the
occupied starts to play first, e.g. CD1, Track 1.
key. The CD starts to play from the selected
point.

36
 CD Changer Operation
Sampling and selecting (Scan)
All tracks on the CD are automatically sampled
briefly in succession.
Press the function key (10) below 'SC' (11) to
start sampling.

CD 1 03 SC 10 54AM
1 2 3 4 5 6 FM AM RND SC MODE

ICE1370

To select a track, press the function key (10)

below 'SC' (11).
The scan function is interrupted and the CD plays
from the point reached.

Random Play
The tracks on the CD are played in an entirely
random order.
Press the function key (10) below 'RND' (11) and
the display (3) shows 'RND' and the number of
the track on the CD.

CD 1 03 RND 10 54AM
1 2 3 4 5 6 FM AM TP RND SC MODE

ICE1371

NOTE: You can operate the buttons for skipping

tracks and fast forward/rewind during random
play. This enables you to skip a track that you do
not want to listen to.

Stopping random play

Press the function key (10) below 'RND' (11).
The random play function is interrupted and the
CD plays from the point reached.

37
 Caring for Compact and MiniDiscs
Caring for Compact and MiniDiscs

SOL NER
T
VEN
A
CLE
ICE 0022

CARING FOR COMPACT AND MINIDISCS

Dirt, dust, condensation and heat can damage NEVER leave the disc or the box exposed to
discs. Always observe the following precautions: excessive heat or direct sunlight!
NEVER touch the horizontal playing surface (the NEVER use a solvent or abrasive cleaner! Dust or
unlabelled side) of a disc! Handle discs by dirt should be removed from the playing surface
holding the outer edges, or the edge of the by wiping with a clean, dry, lint-free cloth always
central hole and the outer edge, between finger wipe in a straight line from the centre to the edge
and thumb. of the disc!
ALWAYS return discs to their boxes after use NEVER place Minidiscs near magnetic fields
(dirt detracts from the sound quality). such as loudspeakers.

38
 Conformance
EEC CONFORMANCE
Conformance

In conformance with current EC guidelines, any

person may operate this radio receiver.
This unit conforms to the current valid European
or harmonised national regulations. The
designation is your guarantee of conformance to
the applicable specifications concerning
electromagnetic compatibility for the unit. This
means that interference affecting other
electrical/electronic devices caused by your unit,
as well as interfering influences on your unit
from other electrical/electronic devices, can be
largely prevented.
Current valid designations are:
- CE symbol for issue according to European H4371
guideline 89/336/EEC under application of the
following standards:
EN 55013
EN 55020

- e symbol according to European motor vehicle

EMC guideline 95/54/EU, also permits operation
in motor vehicles (classes M, N and 0) which
received their type approval after 1st January
1996.

39
40
 Index
A Computer
Audio button 5 Average speed 17
Auxiliary heater switch-on timing 13 Distance from destination 15
Auxiliary heating switching on/off 13 Estimated time of arrival 16
Extended immobiliser function 17
C Fuel consumption 16
Cassette player Functions 14
Care of player and tapes 28 Range 16
Controls 25 Remote control 18
Dolby noise reduction 27 Speed limit 15
Error display 26 Units of measurement 15
Fast forward/rewind 26 Controls 5
Music search 26 Audio button 5
Starting 26 Clock functions 5
Stopping 26 Computer information access button 5
CD changer Display 5
CD CHECK 36 DSP button 5
HIGH TEMP 36 Eject button 5
Location 35 Function key display 5
Magazine filling/emptying 35 Function keys 5
Magazine insertion 35 Manual station selection button 6
Music track search 36 On/Off/Volume 6
NO DISCS 36 Station/Title/Search button 6
NO MAGAZINE 36 Tone button 5
Operating parameters 36
Random play 37 D
Removal 35 Digital Sound Processing (DSP)
Start/stop CD play 36 Modifying sound memory 10
CD/Minidisc Selecting sound memory 9
Care of discs 38 Switching off 10
Clock Use 9
Adjusting/setting date 12 Display 5
Adjusting/setting time 11 DSP button 5
Functions 5
Reminder signal 12 E
Stopwatch 12 EEC Conformance 39
To display time or date 11 EEC conformance 39
Eject 5

G
General operation
Activating the tone menu 9
Key Memory - Memorising the settings 10
Resetting the tone settings 9

41
 Index
I S
Ignition Off listening 8 Single CD player
Independent ventilation switching on/off 13 CD ERROR 33
Independent ventilation switch-on timing 13 Controls 32
Fast forward/reverse 33
K NO DISC 33
Key memory 10 Random play OFF 34
Random play ON 34
M Sampling and selecting (Scan) 33
Media slot 5 Start 33
Minidisc player
Controls 29 Stop 33
Fast forward/reverse 30 Track search 33
Random play off 31 Speed-dependent volume control 8
Random play on 31
Sampling and selecting (Scan) 30
T
Tone button 5
Start/stop 30
Tone menu 9
Track search 30 Tone settings 9
Monitor screen cleaning 4
Multi-information Display V
Operating principle 7 Volume adjustment 8
Multi-information display 7

O
On/Off switch 8

R
Radio
Automatic memorising 23
Calling up a station from memory 22
Manual station selection 20
Memorising and calling up stations 22
Memorising stations 22
Memorising waveband 22
Memory locations 22
Programme type (PTY) 21
Reception 24
Sampling and selecting (Scan) 21
Search for station 20
Selecting station by name 20
Selecting waveband 20
Switching to other media 23
Radio Controls 19
Radio operation
Selecting stations by frequency 20
Restoring volume default settings 8

42