Pressure Test Points

GEPEF PRESSURE TEST POINT

Products Model Description Page

TPRM Male Thread Pressure Test Point 4

TPBO 24° (DKO) Pressure Test Point - DIN 2353 / ISO 8434-1 – Form “A” 5

TPBO 24° (DKO) Pressure Test Point - DIN 2353 / ISO 8434-1 – Form “B” 6

TPCD Double Female Straight 24° Fitting Pressure Test Point - DIN 2353 / ISO 8434-1 7

TPCD M/F Double Male / Female Straight 24° Fitting Pressure Test Point - DIN 2353 / ISO 8434-1 8

TPPL Pressure Test Point with Stand Pipe DIN 2353 / ISO 8434-1 9

TPBJ JIC 37° Thread Pressure Test point SAE J1514 / ISO 8434-2 10

TPCD JIC Double Female JIC 37° Pressure Test Point SAE J1514 / ISO 8434-2 11

TPCD JIC M/F Double Male / Female JIC 37° Pressure Test Point SAE J1514 / ISO 8434-2 12

TPRF - ORFS ORFS Pressure Test Point SAE 1453 / ISO 8434-3 13

TPCD ORFS M/F Male / Female Straight ORFS Fitting Pressure Test Point – SAE 1453 / ISO 8434-3 14

TPPS Bulkhead Pressure Test Point 15

TPPD Double Bulkhead Pressure Test Point 16

TPRF Female Thread Pressure Test Point 17

TPPF Female Bulkhead Thread Pressure Test Point 18

TPAG Male 90° Thread Pressure Test Point 19

TPAL Male / Female 90° Thread Pressure Test Point 20

TPRI BSF Pressure Test Point 21

TPSE Plug-In Pressure Test Point 22

TPRE S12,65 X 1,5 Male Pressure Test Point 23

www.gepef.com.br Revised in June 2023

PRESSURE TEST POINT
Pressure Test Points serve as system access points for analyses and tests in fluid circuits, without loss
of fluids, for nominal pressures up to 630 bar.
Can be used to make leak-tight connections under pressure.
Protected against vibrations that prevent the protective cover from loosening.
Sealing systems available: Spherical or piston sealing.
Materials available: Steel or 316 stainless steel.
Different combinations of seals to be applied at different temperatures and fluids.
Fully tested for total tightness for both gases and fluids.
Surface treatments available – protect Cr(VI)-free and zinc /nickel.

Capillary Test Hose

Opening Pin

Swivel Nut

Protection Cap

Pressure Test Point

Anti-vibration Sealing

Appliance According to
Pressure Measurement ISO 15171-2
Circuits Bleeding
Fluid Collect Samples

Sealing System Metal Parts

Piston (standard) or Ball Steel
316 Stainless Steel

Working Pressure Finish Treatment

Up to 630 bar / 9137 PSI White Coating Cr(VI)-free
Possible to Connect up to 400 bar / 5801 PSI Zinc - Nickel
Green Coating Cr (VI) -free

Seals and Working Temperature Fluid Compatibility

NBR / Buna-N (-25°C up to 100°C) (-13°F up to +212°F) - (Standard) Hydraulic oils and mineral-based oils
(FKM) Viton (-15°C up to 200°C) (-5°F up to +392°F) - V Compatibility with other fluids: on request
EPDM (-40°C up to 150°C) (-40°F up to +302°F) - E

3
Male Thread Pressure Test Point TPRM
N or F

H
S

H1
T

N or F Thread Thread T H H1 S Working Pressure Sealing Type Weight / kg

N - M16x2 TPRM M8x1 37 8 17 250 bar / 3625 PSI OR 0,07
F - M16x1,5 TPRM M10x1 37 8 17 400 bar / 5801 PSI OR 0,07
TPRM M10x1 37 8 17 400 bar / 5801 PSI O / WD 0,07
TPRM M12x1,5 37 10 17 630 bar / 9137 PSI O / WD 0,07
TPRM M14x1,5 38 12 19 630 bar / 9137 PSI O / WD 0,08
TPRM M16x1,5 36 12 22 630 bar / 9137 PSI O / WD 0,11
TPRM G1/8 BSP 35 8 17 400 bar / 5801 PSI WD 0,07
TPRM G1/4 BSP 37 12 19 630 bar / 9137 PSI WD 0,08
TPRM G3/8 BSP 37 12 22 630 bar / 9137 PSI WD 0,10
TPRM G1/2 BSP 38 14 27 630 bar / 9137 PSI WD 0,13
TPRM G3/4 BSP 38 16 32 630 bar / 9137 PSI WD 0,18
TPRM R1/8 BSPT 34 8 17 400 bar / 5801 PSI C 0,07
TPRM R1/4 BSPT 34 12 17 630 bar / 9137 PSI C 0,08
TPRM 1/8 NPT 34 10 17 400 bar / 5801 PSI C 0,07
TPRM 1/4 NPT 34 15 17 630 bar / 9137 PSI C 0,08
TPRM 3/8 NPT 34 15 19 630 bar / 9137 PSI C 0,09
TPRM 1/2 NPT 34 20 22 630 bar / 9137 PSI C 0,12
TPRM 3/4 NPT 34 20 27 630 bar / 9137 PSI C 0,16
TPRM 5/16-24 UNF 37 8 17 400 bar / 5801 PSI O 0,07
TPRM 7/16-20 UNF 37 9,5 17 630 bar / 9137 PSI O 0,07
TPRM 1/2-20 UNF 38 9,5 17 630 bar / 9137 PSI O 0,08
TPRM 9/16-18 UNF 39 10 19 630 bar / 9137 PSI O 0,08
TPRM 3/4-16 UNF 39 11,5 22 630 bar / 9137 PSI O 0,10

O Type C Type WD Type

ISO 6149-2 / -3 Metric Thread DIN 3852-2 - BSPT Thread ISO 1179-2 - BSP Thread
ISO 11926-2 / -3 UNF Thread ANSI / ASME B1.20.1-1983 - NPT Thread ISO 9974-2 - Metric Thread

How to code (example):

N-TPRM 1/4 BSP WD (M16x2 Pressure Test point, Thread G 1/4 BSP, Seal Type WD).
In case of Stainless Steel 316, add I at the end of the code.
In case of Viton Seal, or EPDM, add V or E at the end of the code.
In case you need another type of pressure test point that you couldn’t find on this catalog, contact our technical department.

4
24° (DKO) Pressure Test Point - DIN 3865
Form ´´A´´ TPBO

N or F

52
S.17

S2

24°
ØD
T

N or F Thread L Series
N - M16x2 Type D T S2 Working Pressure Weight / kg
F - M16x1,5
TPBO 6L 6 M12x1,5 17 315 bar / 4568 PSI 0,09
TPBO 8L 8 M14x1,5 17 315 bar / 4568 PSI 0,09
TPBO 10L 10 M16x1,5 19 315 bar / 4568 PSI 0,10
TPBO 12L 12 M18x1,5 22 315 bar / 4568 PSI 0,11
TPBO 15L 15 M22x1,5 27 315 bar / 4568 PSI 0,16

S Series
Type D T S2 Working Pressure Weight / kg
TPBO 6S 6 M14x1,5 17 630 bar / 9137 PSI 0,09
TPBO 8S 8 M16x1,5 19 630 bar / 9137 PSI 0,10
TPBO 10S 10 M18x1,5 22 630 bar / 9137 PSI 0,11
TPBO 12S 12 M20x1,5 24 630 bar / 9137 PSI 0,12
TPBO 14S 14 M22x1,5 27 630 bar / 9137 PSI 0,16

How to code (example):

N-TPBO 10S (M16x2 Pressure Test point, M18x1,5 thread for tube connection Ø10, S series).
In case of Stainless Steel 316, add I at the end of the code.
In case of Viton Seal, or EPDM, add V or E at the end of the code.
In case you need another type of pressure test point that you couldn’t find on this catalog, contact our technical department.

5
24° (DKO) Pressure Test Point - DIN 3865
Form ´´B´´ TPBO
N or F

36
S.17

H
S2

24°
ØD
T

N or F Thread L Series
N - M16x2 Type D T S2 H Working Pressure Weight / kg
F - M16x1,5
TPBO 18L 18 M26x1,5 32 58 315 bar / 4568 PSI 0,19
TPBO 22L 22 M30x2 36 58 160 bar / 2320 PSI 0,22
TPBO 28L 28 M36x2 41 60 160 bar / 2320 PSI 0,30
TPBO 35L 35 M45x2 50 63 160 bar / 2320 PSI 0,47
TPBO 42L 42 M52x2 60 64 160 bar / 2320 PSI 0,64

S Series
Type D T S2 H Working Pressure Weight / kg
TPBO 16S 16 M24x1,5 30 56 400 bar / 5801 PSI 0,17
TPBO 20S 20 M30x2 36 61 400 bar / 5801 PSI 0,23
TPBO 25S 25 M36x2 46 63 400 bar / 5801 PSI 0,37
TPBO 30S 30 M42x2 50 65 400 bar / 5801 PSI 0,43
TPBO 38S 38 M52x2 60 68 315 bar / 4568 PSI 0,72

How to code (example):

N-TPBO 18L (M16x2 Pressure Test point, M22x1,5 thread for tube connection Ø18, L series).
In case of Stainless Steel 316, add I at the end of the code.
In case of Viton Seal, or EPDM, add V or E at the end of the code.
In case you need another type of pressure test point that you couldn’t find on this catalog, contact our technical department.

6
Double Female Straight 24° Fitting
Pressure Test Point DIN 2353 / ISO 8434-1 TPCD

N or F

H
S.17

24°
ØD

T
S2
L1

N or F Thread L Series
N - M16x2 Type D T S2 H L1 Working Pressure Weight / kg
F - M16x1,5
TPCD 6L 6 M12x1,5 24 46 37 315 bar / 4568 PSI 0,14
TPCD 8L 8 M14x1,5 24 46 37 315 bar / 4568 PSI 0,14
TPCD 10L 10 M16x1,5 24 46 39 315 bar / 4568 PSI 0,14
TPCD 12L 12 M18x1,5 24 46 39 315 bar / 4568 PSI 0,14
TPCD 15L 15 M22x1,5 30 49 41 315 bar / 4568 PSI 0,19
TPCD 18L 18 M26x1,5 30 49 41 315 bar / 4568 PSI 0,20
TPCD 22L 22 M30x2 32 50 45 160 bar / 2320 PSI 0,20
TPCD 28L 28 M36x2 41 55 45 160 bar / 2320 PSI 0,35
TPCD 35L 35 M45x2 46 57 49 160 bar / 2320 PSI 0,35
TPCD 42L 42 M52x2 55 62 49 160 bar / 2320 PSI 0,46

S Series
Type D T S2 H L1 Working Pressure Weight / kg
TPCD 6S 6 M14x1,5 24 46 41 630 bar / 9137 PSI 0,14
TPCD 8S 8 M16x1,5 24 46 41 630 bar / 9137 PSI 0,14
TPCD 10S 10 M18x1,5 24 46 41 630 bar / 9137 PSI 0,14
TPCD 12S 12 M20x1,5 24 46 41 630 bar / 9137 PSI 0,16
TPCD 14S 14 M22x1,5 27 48 45 630 bar / 9137 PSI 0,18
TPCD 16S 16 M24x1,5 30 49 45 400 bar / 5801 PSI 0,22
TPCD 20S 20 M30x2 32 50 49 400 bar / 5801 PSI 0,24
TPCD 25S 25 M36x2 41 55 53 400 bar / 5801 PSI 0,35
TPCD 30S 30 M42x2 46 57 57 400 bar / 5801 PSI 0,36
TPCD 38S 38 M52x2 55 62 61 315 bar / 4568 PSI 0,36

How to code (example):

N-TPCD 22L (M16x2 Pressure Test point, double tube connection Ø22, L series).
In case of Stainless Steel 316, add I at the end of the code.
In case of Viton Seal, or EPDM, add V or E at the end of the code.
In case you need another type of pressure test point that you couldn’t find on this catalog, contact our technical department.

7
Double Male / Female Straight 24° Fitting
Pressure Test Point - DIN 2353 / ISO 8434-1 TPCD-M/F
N or F

H
S.17

24°
ØD
24°

ØD
T

S2 S3

L1

N or F Thread L Series
N - M16x2 Type D T S2 S3 H L1 Working Pressure
F - M16x1,5
TPCD 6L M/F 6 M12x1,5 24 17 46 45 315 bar / 4568 PSI
TPCD 8L M/F 8 M14x1,5 24 17 46 45 315 bar / 4568 PSI
TPCD 10L M/F 10 M16x1,5 24 19 46 46 315 bar / 4568 PSI
TPCD 12L M/F 12 M18x1,5 24 22 46 46 315 bar / 4568 PSI
TPCD 15L M/F 15 M22x1,5 30 27 49 47 315 bar / 4568 PSI
TPCD 18L M/F 18 M26x1,5 32 32 50 48 315 bar / 4568 PSI
TPCD 22L M/F 22 M30x2 36 36 52 54 160 bar / 2320 PSI
TPCD 28L M/F 28 M36x2 41 41 55 53 160 bar / 2320 PSI
TPCD 35L M/F 35 M45x2 46 50 57 68 160 bar / 2320 PSI
TPCD 42L M/F 42 M52x2 55 60 62 68 160 bar / 2320 PSI

S Series
Type D T S2 S3 H L1 Working Pressure
TPCD 6S M/F 6 M14x1,5 24 17 46 47 630 bar / 9137 PSI
TPCD 8S M/F 8 M16x1,5 24 19 46 47 630 bar / 9137 PSI
TPCD 10S M/F 10 M18x1,5 24 22 46 47 630 bar / 9137 PSI
TPCD 12S M/F 12 M20x1,5 24 24 46 47 630 bar / 9137 PSI
TPCD 14S M/F 14 M22x1,5 27 27 48 51 630 bar / 9137 PSI
TPCD 16S M/F 16 M24x1,5 30 30 49 50 400 bar / 5801 PSI
TPCD 20S M/F 20 M30x2 36 36 52 52 400 bar / 5801 PSI
TPCD 25S M/F 25 M36x2 41 46 55 63 400 bar / 5801 PSI
TPCD 30S M/F 30 M42x2 46 50 57 70 400 bar / 5801 PSI
TPCD 38S M/F 38 M52x2 55 60 62 74 315 bar / 4568 PSI

How to code (example):

N-TPCD 22L M/F (M16x2 Pressure Test point, double tube connection Male / Female Ø22, L series).
In case of Stainless Steel 316, add I at the end of the code.
In case of Viton Seal, or EPDM, add V or E at the end of the code.
In case you need another type of pressure test point that you couldn’t find on this catalog, contact our technical department.

8
Pressure Test Point with Stand Pipe
DIN 2353 / ISO 8434-1 TPPL

N or F

35
S.17

H
ØD

N or F Thread Type D H
N - M16x2 TPPL 4 4 20
F - M16x1,5 TPPL 6 6 20
TPPL 8 8 20
TPPL 10 10 22
TPPL 12 12 22
TPPL 14 14 22
TPPL 15 15 25
TPPL 16 16 28

How to code (example):

N-TPPL 10 (M16x2 Pressure Test Point with stand pipe Ø10).
In case of Stainless Steel 316, add I at the end of the code.
In case of Viton Seal, or EPDM, add V or E at the end of the code.
In case you need another type of pressure test point that you couldn’t find on this catalog, contact our technical department.

9
JIC 37° Thread Pressure Test point
SAE J514 / ISO 8434-2 TPBJ

N or F

H
S1

S2

37°

N or F Thread Thread T Size Pipe S1 S2 H

N - M16x2 TPBJ 7/16-20 UNF -4 1/4 19 19 54
F - M16x1,5 TPBJ 1/2-20 UNF -5 5/16 19 19 55
TPBJ 9/16-18 UNF -6 3/8 19 19 57
TPBJ 3/4-16 UNF -8 1/2 22 19 59
TPBJ 7/8-14 UNF -10 5/8 22 27 60
TPBJ 1.1/16-12 UN -12 3/4 17 32 70
TPBJ 1.3/16-12 UN -14 7/8 17 32 70
TPBJ 1.5/16-12 UN -16 1 17 41 72
TPBJ 1.5/8-12 UN -20 1.1/4 17 50 72
TPBJ 1.7/8-12 UN -24 1.1/2 17 60 79

How to code (example):

N-TPBJ 1/2-20 UNF (M16x2 Pressure Test Point, 1/2-20 UNF, 37° thread for tube connection Ø5/16).
In case of Stainless Steel 316, add I at the end of the code.
In case of Viton Seal, or EPDM, add V or E at the end of the code.
In case you need another type of pressure test point that you couldn’t find on this catalog, contact our technical department.

10
Double Female JIC 37° Pressure Test Point
SAE J514 / ISO 8434-2 TPCD JIC

N or F

H
S.17

37°

T
L2 S2 L2
L1

N or F Thread Thread T Size Pipe S2 L1 L2 H

N - M16x2 TPCD JIC 7/16-20 UNF -4 1/4 24 45 14 46
F - M16x1,5 TPCD JIC 1/2-20 UNF -5 5/16 24 45 14 46
TPCD JIC 9/16-18 UNF -6 3/8 24 45 14 46
TPCD JIC 3/4-16 UNF -8 1/2 30 50 16,5 49
TPCD JIC 7/8-14 UNF -10 5/8 30 56 19,5 49
TPCD JIC 1.1/16-12 UN -12 3/4 36 61 22 52
TPCD JIC 1.3/16-12 UN -14 7/8 36 63 23 52
TPCD JIC 1.5/16-12 UN -16 1’ 41 63 23 55
TPCD JIC 1.5/8-12 UN -20 1.1/4 46 66 24,5 57
TPCD JIC 1.7/8-12 UN -24 1.1/2 55 72 27,5 62

How to code (example):

N-TPCD JIC 1/2-20 UNF (M16x2 Pressure Test Point, double connection fitting JIC 37°, 1/2-20 UNF thread, for tube connection Ø5/16).
In case of Stainless Steel 316, add I at the end of the code.
In case of Viton Seal, or EPDM, add V or E at the end of the code.
In case you need another type of pressure test point that you couldn’t find on this catalog, contact our technical department.

11
Double Male / Female JIC 37° Pressure
Test Point SAE J514 / ISO 8434-2 TPCD JIC M/F

N or F

H
S.17

37°

37°
T
T
L2 S2 S3
L1

N or F Thread Thread T Size Pipe S2 S3 L1 L2 H

N - M16x2 TPCD JIC M/F 7/16-20 UNF -4 1/4 24 19 48 14 46
F - M16x1,5 TPCD JIC M/F 1/2-20 UNF -5 5/16 24 19 51 14 46
TPCD JIC M/F 9/16-18 UNF -6 3/8 24 19 52 14 46
TPCD JIC M/F 3/4-16 UNF -8 1/2 27 22 57,5 16,5 49
TPCD JIC M/F 7/8-14 UNF -10 5/8 30 27 63,5 19,5 49
TPCD JIC M/F 1.1/16-12 UN -12 3/4 32 32 71 22 52
TPCD JIC M/F 1.3/16-12 UN -14 7/8 32 36 72 23 52
TPCD JIC M/F 1.5/16-12 UN -16 1 41 41 73 23 55
TPCD JIC M/F 1.5/8-12 UN -20 1.1/4 46 50 77,5 24,5 57
TPCD JIC M/F 1.7/8-12 UN -24 1.1/2 55 60 87,5 27,5 62

How to code (example):

N-TPCD JIC M/F 1/2-20 UNF (M16x2 Pressure Test Point, double connection fitting male / female JIC 37°, 1/2-20 UNF thread, for tube connection Ø5/16).
In case of Stainless Steel 316, add I at the end of the code.
In case of Viton Seal, or EPDM, add V or E at the end of the code.
In case you need another type of pressure test point that you couldn’t find on this catalog, contact our technical department.

12
ORFS Pressure Test Point
SAE 1453 / ISO 8434-3 TPRF - ORFS

N or F

H
S1

S2

N or F Thread Thread T Size Pipe S1 S2 H

N - M16x2 TPRF 9/16-18 UNF - ORFS -4 1/4 17 19 54
F - M16x1,5 TPRF 11/16-16 UN - ORFS -6 5/16 19 22 54
TPRF 13/16-16 UN - ORFS -8 1/2 22 24 54
TPRF 1-14 UNS - ORFS -10 5/8 17 30 64,5
TPRF 1.3/16-12 UN - ORFS -12 3/4 17 36 65,6
TPRF 1.7/16-12 UN - ORFS -16 1 17 41 65,5
TPRF 1.11/16-12 UN - ORFS -20 1.1/4 17 50 65,5
TPRF 2-12 UN - ORFS -24 1.1/2 17 60 65,5

How to code (example):

N-TPRF 11/16-16 UN - ORFS (M16x2 Pressure Test Point, Male thread 11/16-16 UN -ORFS) .
In case of Stainless Steel 316, add I at the end of the code.
In case of Viton Seal, or EPDM, add V or E at the end of the code.
In case you need another type of pressure test point that you couldn’t find on this catalog, contact our technical department.

13
Male / Female Straight ORFS Fitting Pressure
Test Point SAE 1453 / ISO 8434-3 TPCD ORFS M/F
N or F

H
S.17

T
L2 S2
S3
L1

N or F Thread Thread T Size Pipe S2 S3 L1 L2 H

N - M16x2 TPCD ORFS M/F 9/16-18 UNF -4 1/4 24 19 49 10 46
F - M16x1,5 TPCD ORFS M/F 11/16-16 UN -6 5/16 24 22 52 11 46
TPCD ORFS M/F 13/16-16 UN -8 1/2 24 24 57 13 46
TPCD ORFS M/F 1-14 UNS -10 5/8 30 30 64 15,5 49
TPCD ORFS M/F 1.3/16-12 UN -12 3/4 36 36 68 17 52
TPCD ORFS M/F 1.7/16-12 UN -16 1 41 41 69 17,5 55
TPCD ORFS M/F 1.11/16-12 UN -20 1.1/4 50 50 69 17,5 59
TPCD ORFS M/F 2-12 UN -24 1.1/2 60 60 69 17,5 64

How to code (example):

N-TPCD ORFS M/F 9/16-18 UNF (M16x2 Pressure Test Point, double connection fitting ORFS, 9/16”-18 UNF thread, for tube connection 5/16”).
In case of Stainless Steel 316, add I at the end of the code.
In case of Viton Seal, or EPDM, add V or E at the end of the code.
In case you need another type of pressure test point that you couldn’t find on this catalog, contact our technical department.

14
Bulkhead Pressure Test Point TPPS
N or F N or F N or F

H
S1
H

S1

H
S1

S2 S2 S2

H1
H1

H1
T ØD
37°
24°
T
T

ORFS JIC37° DIN 2353

N or F Thread Thread T D S1 S2 H H1 Forma

N - M16x2 TPPS 9/16-18 UNF - ORFS 1/4 19 19 60 25 ORFS
F - M16x1,5 TPPS 11/16-16 UN - ORFS 5/16 22 27 70 36 ORFS

TPPS 7/16-20 UNF - JIC 1/4 17 17 60 25 JIC 37°

TPPS M12x1,5-6L 6 17 17 69 34 DIN 2353

TPPS M14x1,5-8L 8 19 19 69 34 DIN 2353
TPPS M16X1,5-10L 10 22 22 70 34 DIN 2353

TPPS M14x1,5-6S 6 19 19 71 36 DIN 2353

TPPS M16x1,5-8S 8 19 19 71 36 DIN 2353
TPPS M18x1,5-10S 10 24 24 72 37 DIN 2353

How to code (example):

N-TPPS 9/16-18 UNF-ORFS (Bulkhead M16x2 Pressure Test Point, Male thread 9/16-18 UNF-ORFS).
In case of Stainless Steel 316, add I at the end of the code.
In case of Viton Seal, or EPDM, add V or E at the end of the code.
In case you need another type of pressure test point that you couldn’t find on this catalog, contact our technical department.

15
Double Bulkhead Pressure Test Point TPPD
N or F

26
S.19

( max.)
12
S.19

36
T

Thread T N F T Working Pressure

N - TPPD M16x2 M16x2 M16x2 630 bar / 9137 PSI
N - TPPD M16x1,5 M16x2 M16x1,5 630 bar / 9137 PSI
F - TPPD M16x2 M16x1,5 M16x2 630 bar / 9137 PSI
F - TPPD M16x1,5 M16x1,5 M16x1,5 630 bar / 9137 PSI

How to code (example):

N-TPPD M16x2 (Double Bulkhead Pressure Test Point, Male Thread M16x2).
In case of Stainless Steel 316, add I at the end of the code.
In case of Viton Seal, or EPDM, add V or E at the end of the code.
In case you need another type of pressure test point that you couldn’t find on this catalog, contact our technical department.

16
Female Thread Pressure Test Point TPRF

N or F

H
S1

H1
T

N or F Thread Thread T S1 H H1 Working Pressure

N - M16x2 TPRF 1/8 NPT 19 52 9 400 bar / 5801 PSI
F - M16x1,5 TPRF 1/4 NPT 19 52 14 630 bar / 9137 PSI
TPRF 1/2 NPT 27 56 16,5 630 bar / 9137 PSI
TPRF G1/8 BSP 19 52 9 400 bar / 5801 PSI
TPRF G1/4 BSP 19 52 14 630 bar / 9137 PSI
TPRF G1/2 BSP 27 56 16,5 630 bar / 9137 PSI

How to code (example):

N-TPRF 1/8 NPT (Pressure Test Point M16x2, Female Thread 1/8 NPT).
In case of Stainless Steel 316, add I at the end of the code.
In case of Viton Seal, or EPDM, add V or E at the end of the code.
In case you need another type of pressure test point that you couldn’t find on this catalog, contact our technical department.

17
Female Bulkhead Thread Pressure Test Point TPPF

N or F N or F

H
S1 S1

( max.)

( max.)
12

12
S2 S2

T T
BSP NPT
( EN 837-1 )

N or F Thread Thread T S1 S2 H Working Pressure

N - M16x2 TPPF G1/4 BSP 19 19 63 630 bar / 9137 PSI
F - M16x1,5 TPPF G1/2 BSP 19 27 70 630 bar / 9137 PSI
TPPF 1/4 NPT 19 19 64 630 bar / 9137 PSI
TPPF 1/2 NPT 19 27 70 630 bar / 9137 PSI

How to code (example):

N-TPPF G1/4 BSP (M16x2 Bulkhead Pressure Test Point, Female Thread G1/4 BSP).
In case of Stainless Steel 316, add I at the end of the code.
In case of Viton Seal, or EPDM, add V or E at the end of the code.
In case you need another type of pressure test point that you couldn’t find on this catalog, contact our technical department.

18
Male 90° Thread Pressure Test Point TPAG

N or F

H
S17

T
S2
25

N or F Thread Thread T S2 H Working Pressure

N - M16x2 TPAG 1/8 NPT 19 50 400 bar / 5801 PSI
F - M16x1,5 TPAG 1/4 NPT 19 50 400 bar / 5801 PSI
TPAG 3/8 NPT 19 50 400 bar / 5801 PSI

How to code (example):

N-TPAG 1/8 NPT (M16x2 Angular 90° Pressure Test Point, Male thread 1/8 NPT).
In case of Stainless Steel 316, add I at the end of the code.
In case of Viton Seal, or EPDM, add V or E at the end of the code.
In case you need another type of pressure test point that you couldn’t find on this catalog, contact our technical department.

19
Male / Female 90° Thread Pressure Test Point TPAL

N or F

H
S17

T
1/8´´
NPT
S2
32

N or F Thread Thread T S2 H Working Pressure

N - M16x2 TPAL 1/8 NPT 19 50 400 bar / 5801 PSI
F - M16x1,5 TPAL 1/4 NPT 19 50 400 bar / 5801 PSI
TPAL 3/8 NPT 19 50 400 bar / 5801 PSI

How to code (example):

N-TPAL 1/8 NPT (M16x2 Pressure Test Point, 90° Angular Male / Female thread 1/8 NPT).
In case of Stainless Steel 316, add I at the end of the code.
In case of Viton Seal, or EPDM, add V or E at the end of the code.
In case you need another type of pressure test point that you couldn’t find on this catalog, contact our technical department.

20
BSF Pressure Test Point TPRI
5/8 BSF
JCB

H
S

H1
T

Thread Thread T H H1 S Working Pressure Sealing Type

5/8 BSF - JCB TPRI G1/8 BSP 34 8 17 400 bar / 5801 PSI WD
TPRI G1/4 BSP 34 12 19 400 bar / 5801 PSI WD
TPRI 7/16 UNF 34 9,5 17 400 bar / 5801 PSI O

O Type C Type WD Type

ISO 6149-2 / -3 Metric Thread DIN 3852-2 - BSPT Thread ISO 1179-2 - BSP Thread
ISO 11926-2 / -3 UNF Thread ANSI / ASME B1.20.1-1983 - NPT Thread ISO 9974-2 - Metric Thread

How to code (example):

TPRI G1/8 BSP WD (5/8 BSF-JCB Pressure Test Point, MaleThread G1/8 BSP, WD seal).
In case of Stainless Steel 316, add I at the end of the code.
In case of Viton Seal, or EPDM, add V or E at the end of the code.
In case you need another type of pressure test point that you couldn’t find on this catalog, contact our technical department.

21
Plug-In Pressure Test Point TPSE

H
S.12

H1
T

Thread T H H1 Working Pressure Sealing Type

TPSE M8 x 1 21 8 250 bar / 3625 PSI O
TPSE M10 x 1 21 8 400 bar / 5801 PSI O
TPSE 1/8 NPT 21 10 400 bar / 5801 PSI C

O Type C Type WD Type

ISO 6149-2 / -3 Metric Thread DIN 3852-2 - BSPT Thread ISO 1179-2 - BSP Thread
ISO 11926-2 / -3 UNF Thread ANSI / ASME B1.20.1-1983 - NPT Thread ISO 9974-2 - Metric Thread

How to code (example):

TPSE M8x1 WD (Pin-Lock Pressure Test Point, Male Thread M8x1, WD seal).
In case of Stainless Steel 316, add I at the end of the code.
In case of Viton Seal, or EPDM, add V or E at the end of the code.
In case you need another type of pressure test point that you couldn’t find on this catalog, contact our technical department.

22
S12,65 x 1,5 Male Pressure Test Point TPRE

S12,65 x 1,5

H
S.14

H1
T

Thread Thread T H H1 Working Pressure Sealing Type

S12,65 x 1,5 TPRE G1/8 BSP 33 8 400 bar / 5801 PSI WD
TPRE G1/4 BSP 33 12 630 bar / 9137 PSI WD
TPRE 1/8 NPT 33 10 400 bar / 5801 PSI C
TPRE 1/4 NPT 33 15 630 bar / 9137 PSI C

O Type C Type WD Type

ISO 6149-2 / -3 Metric Thread DIN 3852-2 - BSPT Thread ISO 1179-2 - BSP Thread
ISO 11926-2 / -3 UNF Thread ANSI / ASME B1.20.1-1983 - NPT Thread ISO 9974-2 - Metric Thread

Exemplo de Codificação:
TPRE G1/8BSP WD (S12,65 x 1,5 Pressure Test Point, Male Thread G1/8 BSP, WD seal).
In case of Stainless Steel 316, add I at the end of the code.
In case of Viton Seal, or EPDM, add V or E at the end of the code.
In case you need another type of pressure test point that you couldn’t find on this catalog, contact our technical department.

23
DIAGNOSTIC PRESSURE PANELS

Diagnostic Pressure Panels can be installed in every equipment is necessary to measure different pres-
sures, centralizing them in one accessible place. The legend indicates the origin of the pressure to be
measured. This device is the best option on big equipment or difficult access places. Makes easier the
preventive or corrective diagnosis.

24
 MATRIZ - BOITUVA - SP

55 15 3264-1222
[email protected]

www.gepef.com.br
www.

Avenida do Trabalhador, 1.680 (Centro Empresarial Castelo Branco)

CEP 18552-100 - Boituva - SP
Brasil

FILIAL - BELO HORIZONTE - MG

55 31 3327-4459
[email protected]

www.gepef.com.br

CAPA
Avenida Professor Mário Werneck, 300 (10º andar - sala 1004 - torre 2) Bairro Estoril
CEP 30455-610 - Belo Horizonte - MG
Brasil