High Performance Motor Oil
API LICENSED MOTOR OIL
Royal Purple® High Performance Motor Oil combines premium base oils with proprietary additive technologies to create a high-
performance synthetic engine oil that optimizes performance and protection. Royal Purple® High Performance Motor Oils carry the
current API and ILSAC engine oil licenses, as well as the GM dexos1™*
gasoline engine oil approval.
ILSAC GF-6 AND GM DEXOS1
Modern gasoline direct injection (GDI) engines have achieved levels of power
and fuel economy never before possible in passenger car engines. As a
result, smaller engines operate at much higher loads across all engine
speeds. This has caused increased wear in critical areas of the engine, and
created a destructive phenomenon called low-speed pre-ignition (LSPI). The
unique, state-of-the-art additive technology in Royal Purple High Performance
engine oils is designed specifically to address these issues, and help engines
maintain performance and reliability.
PERFORMANCE ADVANTAGES
• BETTER WEAR PROTECTION - Enhanced additive technology prevents metal-to-metal contact beyond both GM dexos®1* and
ILSAC GF-6A and GF-6B specifications
• INCREASED PROTECTION AGAINST LSPI - Advanced additive chemistry helps reduce Low Speed Pre-Ignition in today’s
turbocharged Gasoline Direct Injection engines.
• INCREASED FUEL EFFICIENCY - A low coefficient of friction results in optimized fuel efficiency (our 5W-30 meets the fuel economy
requirements of a 0W-20 oil; our 0W-20 meets fuel economy requirements of a 0W-16)
• BETTER PROTECTION FOR VEHICLE EXHAUST EMISSIONS EQUIPMENT - Patented anti-wear additive chemistry minimizes the
harmful effects exhaust gases pose to the catalyst
• IMPROVED COMPATIBILITY WITH FUELS CONTAINING ETHANOL - Patented additive technology prevents the white sludge and
lubrication starvation that can occur with higher concentration gasoline-ethanol blends
• SUPERIOR CORROSION PROTECTION - No rust observed in standard industry testing
6/20/2023
OEM SPECIFICATIONS
SAE 0W-16: API SP Resource Conserving and ILSAC GF-6B
SAE 0W-20: Licensed and approved GM dexos1™ Gen 3, API SP Resource Conserving and ILSAC GF-6A
Meets Chrysler FCA US MS-6395, Ford WSS-M2C962-A specifications
SAE 5W-20: Licensed API SP Resource Conserving and ILSAC GF-6A
Meets Chrysler FCA US MS-6395, Ford WSS-M2C960-A specifications
SAE 5W-30: Licensed and approved GM dexos1™ Gen 3, API SP Resource Conserving and ILSAC GF-6A
Meets Chrysler FCA US MS-6395, Ford WSS-M2C961-A specifications
SAE 10W-30: Licensed API SP Resource Conserving and ILSAC GF-6A
Meets Chrysler FCA US MS-6395, GM 6094M specifications
Typical Physical Properties
Test
Property 0W-16 0W-20 5W-20 5W-30 10W-30
Method
Viscosity @ 40°C, cSt ASTM D445 37.1 45.8 46.1 62.4 61.6
Viscosity @ 100°C, cSt ASTM D445 7.3 8.6 8.2 10.5 10.1
Viscosity Index ASTM D2270 164 168 153 159 150
Cold Crank Simulator, cP ASTM D5293 3,055 @-35°C 5,729 @-35°C 4,487 @-30°C 5,719 @-30°C 3,637 @-25°C
HTHS, @150°C, cP ASTM D5481 2.4 2.7 2.6 3.1 3.2
Flash Point, °C (°F) ASTM D92 220 (428) 232 (450) 227 (440) 238 (460) 243 (470)
Pour Point, °C (°F) ASTM D97 -47 (-53) -47 (-53) -48 (-54) -45 (-49) -45 (-49)
TBN, mg KOH ASTM D2896 8.2 8.9 8.9 8.6 8.7
6/20/2023
