Tutorial 1
Tutorial 1
Tutorial 1
Submission Deadline: February 12, 2024 (11:59 pm)
Submission Platform: Google Classroom ( In a single attached PDF format)
------------------------------------------------------------------------------------------------------------
1. When the two resistances R1 and R2 are connected in parallel, they dissipate four
times the power that they dissipate when they are connected in series with the
same ideal source of emf. If R1= 3 Ω, find R2. [Ans: 3 Ω ]
2. Calculate the values of two resistances which when connected in series gives 50
Ω and 8Ω when in parallel. [Ans: 10Ω, 40Ω]
6Ω
3Ω
Figure 1
5. In the circuit shown, the total power dissipated is 448 W. Determine the current
flowing in each resistor and the potential difference between A and B (see Figure
2). [Ans: I= 6,231A, I1 = 1.917 A, I2 =0.4793, I3=3.834, 71.896 V]
5Ω I1
A I 20 Ω I2 10 Ω B
2.5 Ω I
3
Figure 2
6. Determine the value of R, if the power dissipated in 10Ω resistor is 40 W for the
circuit shown in figure 3: [Ans: R = 34.29 Ω]
80 Ω I1
10 Ω 40 Ω I2
R I3
50 V
Figure 3
7. The current in the 6 Ω resistor of the network shown in the figure 4 is 2 A. Find
the current in all other resistors and the voltage V across the network.
[Ans: IR1=5A, IR2=3A, IR3=2A, IR4=3.571A, IR5=1.428A, V=60.568V]
4Ω 8Ω
A 4Ω B
6Ω 20 Ω
V Figure 4
8. In the circuit shown in figure 5, calculate: a) the currents in all resistors, b) the
value of unknown resistance X, and c) the equivalent resistance across A-B. [Ans:
I1 = I2 = 2 A; X = 15 Ω; Req = 3Ω]
10 A
A
5A I1 I2 I3
V 6Ω XΩ 30 Ω 15 Ω
B Figure 5
9. For the circuit shown in figure 7, find the resistance between A and D. [Ans:
5.714 Ω]
12Ω
6Ω
4Ω 8Ω
A B
3Ω
2.1Ω 1.9Ω
Figure 8
11. Find the equivalent resistance between A and B for the network shown in figure
9. [Ans: 4Ω]
24Ω
8Ω 8Ω
A
B
Figure 9
12. In the circuit shown in figure 10, find the value of resistance R, when VAB = 5
Volts. [Ans: 1 Ω]
5Ω 2Ω
A B
15 V
10 Ω RΩ
Figure 10
Email: [email protected]