Quality Assurance & Safety

ORAL ASSESSMENT GUIDE SHEET FOR AIRCRAFT CERTIFYING STAFF

NAME : ID NO :
UNIT / STATION : DATE & TIME :
RATING SOUGHT :
CATEGORY :

The candidate, before assessment will be properly informed for the rules covering the oral examination.

CANDIDATE’S SCORE
NO ASSESSMENT CHECKLIST RESPONSE
(1,2,3,4,5 )

A. REGULATION & PROCEDURE

Knowledge & Understanding on Related Part of Authority Regulation
1
candidate able to describe briefly the outline of:
1.1 UU PENERBANGAN RI & PER-MENTRI NO. 27

a. Pasal 46/ 47/ 48

b. Pasal 58/ 59
c. Pasal 413
d. Peraturan Menteri Perhubungan RI No 27 Tahun 2021.
1.2 CASR/FAR/EASA
a. Part 21 Certification Procedures for Products & Parts *
b. Part 25 Airworthiness Standard Transport Category Airplane
c. Part 39 Airworthiness Directives *
d. Part 43 Maintenance, Preventive Maintenance, Rebuilding and
Alteration *
e. Part 45 Identification and Registration Marking
f. Part 65 Aircraft Maintenance Engineer Licence
g. Part 91 General Operating and Flight Rules *
h. Part 121 Certification and Operating Requirements:
Domestic,Flag,and Suplemental Air Carriers *
i. Part 145.155 / 145.157 / 145.205 / 145.219 / 145.221 Approved
Maintenance Organization *
2 Knowledge & Understanding on GMF Quality System.
Candidate able to brief the outline of:
a. Related Section of AMOM/RSQM/MOE
b. Related Quality Procedure
c. Work Instruction
d. Maintenance Instruction

Form No.: GMF/Q-343A R3 (30 March 2022) Page 1 of 6

 Quality Assurance & Safety

3 Knowledge & Understanding on Operator's Procedure

3.1 Company Maintenance Manual / Technical Handling Manual
a. Handling: Job Cards Certification, Minor Task/Check list
Certification, AML/CML Certification.
b. Handling: RII /Duplicate InspectionTask, Critical Task, Mandatory
Task, ETOPS Task.
c. Handling: AOG ( Special Condition / Aircraft Diversion), Deferred
Defects, Robbing, Cross Change, Hold Item List, ASDCS.
3.2 Maintenance Program (MP)
a. MP Document No & Revision No.
b. Structure Inspection Program (SIP), Corosion Preventive Control
Program(CPCP), Un Schedule , Maintenance, Short Term Escalation
Procedure, FUC,OPC,GVI,SDI,SPC, Self Life.
c. MSG-3 Category : 5,6,7,8,9
d. The basis for Establishment of the Continuous Airworthiness
Maintenance Program development ref CASR 121.367
4 ADTH - INSPECTION & MAINTENANCE RELEASE
( For Line Maintenance Certifying Staff )
4.1 Pre Handling :
a. How to prepare before A/C arriving
b. When prepare before A/C arriving
c. What prepare before A/C arriving
4.2 Handling :
a. How to park A/C after landing
b. How to perform Inspection
c. How to handle Pilot report
d. How to handle LRU
e. How to accomplish service tasks
e. How to perform preflight check
f. How to determine A/C is ready or not for RTS
g. How to issue RTS
h. How to depart the A/C
4.3 Post Handling (using information system)
a. Maintavi
b. Technical Trouble Delay Report (TTDR)
c. Service Dificulty Report (SDR)
d. Hand Over Book Maintenance Actifity
e. SWIFT ( Remove Install Component, DMI, MDR, ASDCS, Tech Log)
f. HIL Management
g. Aircraft Structure Damage Control Sheet (ASDCS )
h. CRP ( Component Recertification Program )

Form No.: GMF/Q-343A R3 (30 March 2022) Page 2 of 6

 Quality Assurance & Safety

B. CATEGORY A/P, E/A SUPORT STAFF & CAT. C-CERTIFYING STAFF

1 KNOWLEDGE

1.1 Knowledge of human factors, human performance and limitations

Knowledge of organisation capabilities, privileges and limitations (scope

1.2
of approval, etc.)

1.3 Knowledge of Dangerous Good ( DG )

Knowledge of relevant parts of the AMO manual and associated

1.4
procedures

1.5 Knowledge of safety risks linked to the working environment

1.6 Knowledge on CDCCL (when relevant)

1.7 Knowledge on basic EWIS / FTS (when relevant)

Knowledge of occurrence reporting system and understanding of the

1.8 importance of reporting occurrences, incorrect maintenance data and
existing or potential defects

2 UNDERSTANDING

Understanding of professional integrity, behavior and attitude towards

2.1
safety

Understanding of conditions for ensuring continuing Airworthiness of

2.2
Aircraft and components

2.3 Understanding of his/her own human performance and limitations

2.4 Understanding of personnel authorizations and limitations

2.5 Uderstanding of Traceability Rotable Component and Expanadble Part

2.6 Understanding ETOPS /EDTO Task

Form No.: GMF/Q-343A R3 (30 March 2022) Page 3 of 6

 Quality Assurance & Safety

3 ABILITY

Ability to supervise the performance of tasks carried out by non C/S

3.1
personnel (i.e. mechanics, etc.)

3.2 Ability to compile and control completed work cards

3.3 Ability to consider human performance and limitations

3.4 Ability to determine required qualifications for task performance

3.5 Ability to identify and rectify existing and potential unsafe conditions

Ability to check and document proper accomplishment of maintenance

3.6 tasks

3.7 Ability to identify and properly plan performance of Critical Task

3.8 Ability to prioritize tasks and report discrepancies

3.9 Ability to process the work requested by the operator

3.10 Ability to properly process removed, uninstalled and rejected parts

3.11 Ability to properly record and sign for work accomplished

Ability to determine the acceptability of parts to be installed prior to
3.12
fitment

Ability to understand work orders, work cards and refer to and use
3.13
applicable maintenance data

3.14 Ability to use information systems

Ability to use, control and be familiar with required tooling and/or

3.15
equipment

4 Adequate communication and literacy skills:

The A/C certifying staff shall be able to demonstrate a working

knowledge of the language in which the maintenance data is published.
In addition, should the language of the maintenance data not be
English, then English language working knowledge is required to:

4.1 Understand DGCA & FAA Airworthiness Directives.

Communicate with MCC operator not using the language of the state of
4.2
registry.

Form No.: GMF/Q-343A R3 (30 March 2022) Page 4 of 6

 Quality Assurance & Safety

C. AIRCRAFT SYSTEM

1 GENERAL
a. ATA 100 Page Block

b. Trouble Shooting Manual (TSM)/ Fault Isolation Manual (FIM)

c. RVSM / RNP / PBN

d. BITE Process

e. PDA (Part Departing from Aircraft) if relevant

2 Chapter 21( System overview, Ops & FUC, Trouble shooting ) * E/A

3 Chapter 22( System overview, Ops & FUC, Trouble shooting ) * E/A

4 Chapter 23( System overview, Ops & FUC, Trouble shooting )* E/A

5 Chapter 24( System overview, Ops & FUC, Trouble shooting ) * A/P , E/A

6 Chapter 25( System overview, Ops & FUC, Trouble shooting ) * A/P , E/A

7 Chapter 26( System overview, Ops & FUC, Trouble shooting ) * A/P

8 Chapter 27( System overview, Ops & FUC, Trouble shooting )* A/P , E/A

9 Chapter 28( System overview, Ops & FUC, Trouble shooting ) * A/P , E/A

10 Chapter 29( System overview, Ops & FUC, Trouble shooting ) * A/P , E/A

11 Chapter 30( System overview, Ops & FUC, Trouble shooting ) * E/A

12 Chapter 31( System overview, Ops & FUC, Trouble shooting ) * E/A

13 Chapter 32( System overview, Ops & FUC, Trouble shooting ) * A/P

14 Chapter 33( System overview, Ops & FUC, Trouble shooting ) * E/A

15 Chapter 34( System overview, Ops & FUC, Trouble shooting ) * E/A

16 Chapter 35( System overview, Ops & FUC, Trouble shooting ) * A/P

17 Chapter 36( System overview, Ops & FUC, Trouble shooting ) * E/A

18 Chapter 45( System overview, Ops & FUC, Trouble shooting ) * E/A

19 Chapter 47( System overview, Ops & FUC, Trouble shooting ) * E/A
Chapter 49/61( System overview, Ops & FUC, Trouble shooting ) * E/A,
20
A/P
21 Chapter 70-80 ( System overview, Ops & FUC, Trouble shooting ) * A/P

Form No.: GMF/Q-343A R3 (30 March 2022) Page 5 of 6

 Quality Assurance & Safety

D. PERSONAL ATTITUDE AND HUMAN FACTOR

1 Information seeking
2 Analysis thinking
3 Decision making
4 Communication & literacy skills
FINAL SCORE
Overall Result : PASS / FAIL

GRADING :
1 2
Below Standard Minimum Standard
( < 65 ) ( 65 - 74 )
3 4
Satisfactory Very Good Standard
( 75 – 84 ) ( 85 – 94 )
5
Hight Standard
( 95 – 100)

Remark / Disposition : Assessor

( )

Form No.: GMF/Q-343A R3 (30 March 2022) Page 6 of 6