Scribd
Upload
36 views2 pages

Single Cylinder Four Stroke Diesel Engine

The document describes a single cylinder, four stroke diesel engine test setup. The setup can be used to study engine performance parameters like brake power, efficiency, fuel consumption, and heat balance. It consists of an engine, dynamometer, air box, fuel tank, sensors to measure temperature, speed and load.

Uploaded by

mr.htetwaiaung.mech
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
36 views2 pages

Single Cylinder Four Stroke Diesel Engine

The document describes a single cylinder, four stroke diesel engine test setup. The setup can be used to study engine performance parameters like brake power, efficiency, fuel consumption, and heat balance. It consists of an engine, dynamometer, air box, fuel tank, sensors to measure temperature, speed and load.

Uploaded by

mr.htetwaiaung.mech
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Single Cylinder, Four Stroke, Diesel

Engine

The setup consists of single cylinder, four stroke, Diesel engine connected to Eddy current
for engine loading. The setup has stand‐alone type independent panel box consisting of air
box, fuel tank, and manometer, fuel measuring unit, digital speed indicator and digital
temperature indicator. Engine jacket cooling water inlet, outlet and calorimeter temperature
is displayed on temperature indicator. Rotameters are provided for cooling water and
calorimeter flow measurement.
The setup enables study of engine for brake power, BMEP, brake thermal efficiency,
volumetric efficiency, specific fuel consumption, and air fuel ratio and heat balance. It is
supplied with MS Excel program for Engine Performance Analysis.

Features
• MS Excel sample calculation.
• Digital non‐contact speed indication
• Digital temperature indication
• Digital load indication
• Box type manometer for air flow
• Rotameter for water flow

Range of Experiments
• Study of engine performance (Manual mode)
• Study of valve timing diagram
Utilities Required
 Electric supply
 230 +/‐ 10 VAC, 50 Hz, 1 phase
 Water supply
 Continuous, clean and soft water supply @ 1000 LPH, at 10 m. head. Provide tap with 1”
BSP size
 Connection
Specifications
Product Engine test setup 1 cylinder, 4 stroke, Diesel

Product code MT-0225

Engine Make Kirloskar, Model TV1, Type Single cylinder, 4 stroke


Diesel, water cooled, power 5.2 kW (7 BHP) at 1500
rpm, stroke 110 mm, bore 87.5 mm. compression ratio
17.5:1, capacity 661 cc.
Dynamometer Type Eddy current

Propeller shaft With universal joints

Air box M S fabricated with orifice meter and manometer

Fuel tank Capacity 15 lit with glass fuel metering column

Calorimeter Type Pipe in pipe

Temperature sensor Thermocouple, Type K

Temperature indicator Digital, multi-channel with selector switch

Speed indicator Digital with non-contact type speed sensor

Load sensor Load cell, type strain gauge, range 0‐50 Kg

Load indicator Digital, Range 0‐50 Kg, Supply 230VAC

Rotameter Engine cooling 40‐400 LPH; Calorimeter 10‐100 LPH

Pump Type Monoblock

Overall dimensions W 2000 x D 2500 x H 1500 mm

You might also like