SB 552

Spare parts list

Hydraulic breakers

© 2010 Atlas Copco Construction Tools AB | No. 9800 0676 01b | 2010-08-11
SB 552 Contents

Contents
General information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Spare parts list. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Optional parts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Bushing oversize, complete. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Restrictor, complete. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Tightening torque. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Working tools. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Optional equipment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Hydraulic hoses. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Kits. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Label kit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Seal kit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Lower hammer part kit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Accumulator repair kit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Dimensions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

© 2010 Atlas Copco Construction Tools AB | No. 9800 0676 01b | 2010-08-11 3
SB 552 Spare parts list

General information
This spare parts list applies to the following:

Part number Description

8460 0300 80 Hydraulic breaker SB 552

Use only authorized parts. Any damage or malfunction caused by the use of
unauthorized parts is not covered by Warranty or Product Liability.
Any unauthorized use or copying of the contents or any part thereof is
prohibited. This applies in particular to trademarks, model denominations, part
numbers, and drawings.
Instructions for use
This spare parts list contains no safety regulations and is merely intended to
assist in the ordering of spare parts.
For information about operating, servicing, or repairing, the relevant Safety
and operating instructions must be consulted at all costs.
Please observe the safety instructions listed in the relevant Safety and operating
instructions!

© 2010 Atlas Copco Construction Tools AB | No. 9800 0676 01b | 2010-08-11 5
Spare parts list SB 552

Spare parts list

20 21 23
19

18
22
41 24
17
25
40 14 16
8 15
13
12 27
8 26
37 28 27 28 29 30
36 14 29 34
38 30
39 33
32
11 31
10

7
9 38 39
37 36
42 35
8 8
36 37 38

2 46 43
3 4 5 45 44 44 45 46
7 1
6

3 53
4 57
58 59
51 59
58
50

49
48
47 56 62
60
63
55
52
49 61
62 63
51

54

6 © 2010 Atlas Copco Construction Tools AB | No. 9800 0676 01b | 2010-08-11
SB 552 Spare parts list

No. Description Remark Quantity Part number

1 Breaker body 1 -
2(3-5) Bushing, complete For oversize bushings, see chapter 1 3315 3029 80
"Bushing oversize, complete".
3 Valve cover 1 3315 3649 00
4 Scraper ring 1 3315 3030 00
5 O-ring 119.5 x 3 mm (90 shore) 4 0663 2108 23
4.7 x 0.12 in.
6 Stop ring 1 3315 3028 00
7 Plug 2 0686 1000 09
8 Plug VSTI G 1⁄4-ED 7 0686 6442 07
9 Water nozzle, option 2 3315 2560 06
10 Lock pin 1 3315 3191 00
11 Spring pin, option 1 0108 1691 29
12 Tool retainer 2 3315 3059 00
13 Lock buffer 1 3315 1419 00
14 Plug VSTI G 3⁄8-ED 4 0686 3718 01
15 Coil spring 1 3315 3035 00
16 Diaphragm support 1 3315 3032 01
17 Diaphragm 1 3315 3033 00
18 Diaphragm cover 1 3315 3031 00
19 Hexagon socket screw M16 x 50 mm UNBRAKO 12.9 8 0211 1965 44
20 Plug VSTI G ⁄8-ED
1
1 0686 3718 05
21 Seal ring 1 3315 3290 02
22 O-ring 13.3 x 2.4 mm (70 shore) 1 0663 2120 00
0.52 x 0.09 in.
23 Charge valve 1 3315 3660 00
24 O-ring 7.3 x 2.4 mm (90 shore) 1 0663 2114 00
0.29 x 0.09 in.
25 Parallel pin D4 x 25 1 0101 4140 00
26(27-30) Pressure relief valve, complete 1 3315 3658 00
27 Pressure relief valve 1 -
28 O-ring 20.35 x 1.78 mm (90 shore) 1 9125 6211 00
0.8 x 0.07 in.
29 O-ring 14 x 1.78 mm (90 shore) 1 0663 2104 21
0.55 x 0.07 in.
30 Back-up ring 1 0661 2004 01
31 Control valve 1 3315 3121 00
32 Seal ring 51.3 x 54.3 x 3 mm 2 0663 9900 26
2.02 x 2.14 x 0.12 in.
33 O-ring 47.29 x 2.62 (90 shore) 1 0663 2114 91
1.86 x 0.10 in.
34 Valve cover 1 3315 3649 00
35(36-38) Nipple, complete There are 2 "Nipple, complete" on the 1 0570 7000 05
machine.
36 Nipple 1 7⁄16" -12UN G1A 1 -
37 Seal ring 1 0664 0000 05
38 O-ring 23.52 x 1.78 mm (90 shore) 1 0663 2111 25
0.93 x 0.07 in.
39 Cap 2 0570 7000 11
40 Seal SRC 10 x 16 x 2.4 mm 4 0665 0900 14
0.39 x 0.63 x 0.09 in.
41 Plug 1 3315 3367 00
42 Grease nipple ISO 7-R 1⁄4 1 0544 2153 00

© 2010 Atlas Copco Construction Tools AB | No. 9800 0676 01b | 2010-08-11 7
Spare parts list SB 552

No. Description Remark Quantity Part number

43(44-46) Restrictor standard, complete For more restrictors, see chapter "Restrictor, 1 3315 3696 55
complete".
44 Restrictor, standard Ø7.7 mm 1 -
Ø0.3 in.
45 O-ring 14 x 1.78 mm (90 shore) 1 0663 2104 21
0.55 x 0.07 in.
46 O-ring 20.35 x 1.78 mm (90 shore) 1 9125 6211 00
0.8 x 0.07 in.
47 Wiper 1 0665 9099 49
48 Piston rod seal 1 0665 0701 34
49 Beanseal 159.4 x 162.3 x 3 mm 2 0663 9900 27
6.28 x 6.39 x 0.12 in.
50 Liner 1 3315 3025 00
51 O-ring 149.5 x 3 mm 7 0663 2113 03
5.89 x 0.12 in.
52 O-ring 151.64 x 1.78 mm (70 shore) 1 0663 2115 06
5.97 x 0.07 in.
53 Piston 1 3315 3024 00
54 Piston rod seal 1 0665 0701 33
55 Back head 1 3315 3034 00
56 Hexagon head screw M20 x 70 8.8 fzb 8 0147 1555 03
57(58-59) Check valve, complete 1 3315 2448 81
58 Check valve 1 -
59 Valve rubber 1 3315 2808 00
60 Base plate, option 1 3315 3077 00
61(62-63 ) Set of screws, complete 1 3315 3239 90
62 Screw 14 -
63 Nut M20 14 -

8 © 2010 Atlas Copco Construction Tools AB | No. 9800 0676 01b | 2010-08-11
SB 552 Spare parts list

© 2010 Atlas Copco Construction Tools AB | No. 9800 0676 01b | 2010-08-11 9
Spare parts list SB 552

Optional parts
Bushing oversize, complete

1
2 3 4 4

8
5
6 6 7 8

10 © 2010 Atlas Copco Construction Tools AB | No. 9800 0676 01b | 2010-08-11
SB 552 Spare parts list

No. Description Remark Quantity Part number

1(2-4) Bushing oversize, complete 1 3315 3029 60
2 Bushing Ø 135.5 mm 1 -
Ø 5.33 in.
3 Scraper ring 1 3315 3030 00
4 O-ring 119.5 x 3 mm 4 0663 2115 08
4.70 x 0.12 in. (90 shore)
5(6-8) Bushing oversize, complete 1 3315 3029 63
6 Bushing Ø 137 mm 1 -
Ø 5.39 in.
7 Scraper ring 1 3315 3030 00
8 O-ring 119.5 x 3 mm 4 0663 2115 08
4.70 x 0.12 in. (90 shore)

© 2010 Atlas Copco Construction Tools AB | No. 9800 0676 01b | 2010-08-11 11
Spare parts list SB 552

Restrictor, complete

2 3 4
1
2 3 4

6 7 8
5
6 7 8

12 © 2010 Atlas Copco Construction Tools AB | No. 9800 0676 01b | 2010-08-11
SB 552 Spare parts list

No. Description Remark Quantity Part number

1(2-4) Restrictor, complete 1 3315 3695 35
2 O-ring 14 x 1.78 mm 1 0663 2104 21
0.55 x 0.07 in. (90 shore)
3 O-ring 20.35 x 1.78 mm 1 9125 6211 00
0.80 x 0.07 in. (90 shore)
4 Restrictor Ø5.4 mm 1 -
Ø0.21 in.
5(6-8) Restrictor, complete 1 3315 3695 40
6 O-ring 14 x 1.78 mm 1 0663 2104 21
0.55 x 0.07 in. (90 shore)
7 O-ring 20.35 x 1.78 mm 1 9125 6211 00
0.80 x 0.07 in. (90 shore)
8 Restrictor Ø6.0 mm 1 -
Ø0.24 in.

© 2010 Atlas Copco Construction Tools AB | No. 9800 0676 01b | 2010-08-11 13
Spare parts list SB 552

Tightening torque
No. Description Tightening torque Remark
8 Plug 30 Nm Loctite® 243™
14 Plug 80 Nm Loctite® 243™
19 Hexagon socket screw 300 Nm Molycote®
20 Plug 20 Nm
23 Charge valve 20 Nm
27 Pressure relief valve 80 Nm
36 Nipple 315 Nm
42 Grease nipple 30 Nm
44 Restrictor 80 Nm
56 Hexagon head screw 315 Nm Molycote®
58 Check valve 30 Nm Loctite® 243™
63 Nut 400 Nm Molycote®

Loctite is a registered trademark of Henkel Corporation. 243 is a trademark of Henkel Corporation

Molykote is a registered trademark of Dow Corning Corporation.

14 © 2010 Atlas Copco Construction Tools AB | No. 9800 0676 01b | 2010-08-11
SB 552 Spare parts list

Working tools

© 2010 Atlas Copco Construction Tools AB | No. 9800 0676 01b | 2010-08-11 15
Spare parts list SB 552

Metric

No. Description W (mm) L (mm) LT (mm) Wt (kg) Part number

1 Moil point - 475 900 49 3083 3409 05
2 Moil point (X-profile) - 475 900 46 3363 0982 58
3 Chisel (cross) 100 475 900 51 3083 3409 06
4 Chisel (X-profile) 100 475 900 48 3363 0982 59
5 Blunt tool - 475 900 53 3083 3409 07
6 Wide chisel (cross) 200 475 900 52 3083 3409 24
7 Wide chisel (parallel) 200 475 900 52 3083 3409 25
8 Asphalt cutter (cross) 200 475 900 52 3083 3409 42
9 Asphalt cutter (parallel) 200 475 900 39 3083 3409 43
10 Shaft - - 900 53 3315 3705 00
11 Tamping pad (square) Ø400 - - 80 3315 3712 00
12 Post driver pad (round) Ø200 - - 33 3315 3720 00
13 Pile driver pad (round) Ø150 - - 26 3315 3726 00
14 Bushing pad (round) Ø190 - - 30 3315 3732 00

Imperial

No. Description W (in.) L (in.) LT (in.) Wt (lb) Part number

1 Moil point - 18.7 35.4 1.93 3083 3409 05
2 Moil point (X-profile) - 18.7 35.4 1.81 3363 0982 58
3 Chisel (cross) 3.93 18.7 35.4 2.01 3083 3409 06
4 Chisel (X-profile) 3.93 18.7 35.4 1.89 3363 0982 59
5 Blunt tool - 18.7 35.4 2.09 3083 3409 07
6 Wide chisel (cross) 7.87 18.7 35.4 2.05 3083 3409 24
7 Wide chisel (parallel) 7.87 18.7 35.4 2.05 3083 3409 25
8 Asphalt cutter (cross) 7.87 18.7 35.4 2.05 3083 3409 42
9 Asphalt cutter (parallel) 7.87 18.7 35.4 1.54 3083 3409 43
10 Shaft - - 35.4 2.09 3315 3705 00
11 Tamping pad (square) Ø15.75 - - 3.15 3315 3712 00
12 Post driver pad (round) Ø7.87 - - 1.30 3315 3720 00
13 Pile driver pad (round) Ø5.90 - - 1.02 3315 3726 00
14 Bushing pad (round) Ø7.48 - - 1.18 3315 3732 00

16 © 2010 Atlas Copco Construction Tools AB | No. 9800 0676 01b | 2010-08-11
SB 552 Spare parts list

Accessories
Optional equipment

Description Remark Quantity Part number

Grease gun for manual greasing with catridge 400 g 1 0909 1071 00
(0.88 lb)
Chisel paste cartridge 400 g x 12 1 3363 0949 13
0.88 lb x 12
ContiLube™ II micro 1 3315 3831 90
Welding kit, universal for ContiLube™ II micro 1 3315 3867 80
Hose kit, universal for ContiLube™ II micro 1 3315 3862 80
Chisel paste catridge 150 g x 12 1 3363 1064 47
0.33 lb x 12
Filling device for Chisel paste catridges 150 g (0.33 lb) to 1 3363 0946 69
use in combination with Chisel paste
container 15 kg (33.07 lb)
Filling adapter for Chisel paste catridges 150 g (0.33 lb) 1 3315 3839 80
suitable to Filling device for 15 kg (33.07 lb)
and 45 kg (99.21 lb)
Filling device for Chisel paste catridges 150 g (0.33 lb) to 1 3363 0664 11
use in combination with Chisel paste
container 45 kg (99.21 lb)
Chisel paste container 15 kg 1 3362 2639 00
33.07 lb
Chisel paste container 45 kg 1 3362 2632 75
99.21 lb
Filling device for accumulator 1 3360 9204 15
Nipple, for charging the accumulator 1 3363 0944 59
Filling hose, for charging the accumulator 1 3361 3298 03
Bushing wear controller 1 3315 3531 00

© 2010 Atlas Copco Construction Tools AB | No. 9800 0676 01b | 2010-08-11 17
Spare parts list SB 552

Hydraulic hoses

Description Remark Quantity Part number

Hose I.D. 20 (0.79 in.), both ends M36 x 2 mm 2 3360 3311 94
conical seal 24°,
length 2300 mm (90.5 in.)
Hose I.D. 20 (0.79 in.), both ends M36 x 2 mm 2 3363 0859 47
conical seal 24°,
length 2800 mm (110.2 in.)
Additional fitting kit Necessary to fit two hoses to the hydraulic 1 3363 0949 64
breaker

18 © 2010 Atlas Copco Construction Tools AB | No. 9800 0676 01b | 2010-08-11
SB 552 Spare parts list

Kits
Label kit

2
5

1
2 3 4 5 6 7 8

No. Description Remark Quantity Part number

1(2-8) Label kit 1 3315 3215 90
2 AEM sign 1 -
3 Product label "SB 552" 1 -
4 Safety label 1 -
5 Product label "Atlas Copco" 2 -
6 Safety label 1 -
7 Sound power label 1 -
8 Label "Vibro Silenced" 1 -

© 2010 Atlas Copco Construction Tools AB | No. 9800 0676 01b | 2010-08-11 19
Spare parts list SB 552

Seal kit

Description Remark Quantity Part number

Seal kit 1 3315 3036 90
Scraper ring 1 3315 3030 00
O-ring 119.5 x 3 mm 4 0663 2108 23
4.70 x 0.12 in. (90 shore)
Seal ring 1 0661 1000 24
Seal ring 1 3315 3290 02
O-ring 13.3 x 2.4 mm 1 0663 2120 00
0.52 x 0.09 in. (70 shore)
O-ring 7.3 x 2.4 mm 1 0663 2114 00
0.29 x 0.09 in. (70 shore)
O-ring 20.35 x 1.78 mm 2 9125 6211 00
0.80 x 0.07 in. (90 shore)
O-ring 14 x 1.78 mm 2 0663 2114 91
0.55 x 0.07 in. (90 shore)
Back-up ring 1 0661 2004 01
O-ring 47.29 x 2.62 mm 2 0663 2113 18
1.86 x 0.10 in. (90 shore)
Beanseal 51.3 x 54.3 x 3 mm 1 0663 9900 26
2.02 x 2.14 x 0.12 in.
Seal ring 2 0664 0000 05
O-ring 23.52 x 1.78 mm 2 0663 2111 25
0.93 x 0.07 in. (90 shore)
Seal ring SRC 10 x 16 x 2.4 mm 4 0665 0900 14
0.39 x 0.63 x 0.09 in.
Plug 1 3315 3367 00
Wiper 1 0665 9099 49
Piston rod seal 1 0665 0701 34
Beanseal 159.4 x 162.3 x 3 mm 2 0663 9900 27
6.28 x 6.39 x 0.12 in.
O-ring 149.5 x 3 mm 7 0665 2113 03
5.89 x 0.12 in.
Piston rod seal 1 0665 0701 33
Valve rubber 1 3315 2808 00

20 © 2010 Atlas Copco Construction Tools AB | No. 9800 0676 01b | 2010-08-11
SB 552 Spare parts list

Lower hammer part kit

9
8

1
2 6 7 8 9 10

2
3 4 5

5 10

No. Description Remark Quantity Part number

1(2,6-10) Lower hammer part kit 1 3315 3521 95
2(3-5) Bushing, complete 1 3315 3029 80
3 Bushing 1 -
4 Scraper ring 1 3315 3030 00
5 O-ring 119.5 x 3 mm 4 0663 2108 23
4.71 x 0.12 in. (90 shore)
6 Stop ring 1 3315 3028 00
7 Lock pin 1 3315 3191 00
8 Tool retainer 2 3315 3059 00
9 Lock buffer 1 3315 1419 00
10 Chisel paste cartridge, 400 g 1 -

© 2010 Atlas Copco Construction Tools AB | No. 9800 0676 01b | 2010-08-11 21
Spare parts list SB 552

Accumulator repair kit

Description Remark Quantity Part number

Accumulator repair kit 1 3315 3031 90
Coil spring 1 3315 3035 00
Diaphragm support 1 3315 3032 01
Diaphragm 1 3315 3033 00
Screw 8 0211 1965 44
Plug VSTI R 1⁄8 - ED 1 0686 3718 05
Seal ring 1 3115 3290 02
O-ring 13.3 x 2.4 mm 1 0663 2120 00
0.52 x 0.09 in. (70 shore)
Charge valve 1 3315 3660 00
Parallel pin D4 x 25 mm 1 0101 4140 00
O-ring 7.3 x 2.4 mm 1 0663 2114 00
0.29 x 0.09 in. (90 shore)

22 © 2010 Atlas Copco Construction Tools AB | No. 9800 0676 01b | 2010-08-11
SB 552 Spare parts list

Dimensions
mm (inch)

© 2010 Atlas Copco Construction Tools AB | No. 9800 0676 01b | 2010-08-11 23
 © 2010 Atlas Copco Construction Tools AB | No. 9800 0676 01b | 2010-08-11

Any unauthorized use or copying of the contents or any part thereof is prohibited.
This applies in particular to trademarks, model denominations, part numbers, and
drawings.

www.atlascopco.com