Scribd
Upload
1K views2 pages

HDPE Corrugated Pipe Specs

This document provides specifications for high density polyethylene (HDPE) double walled corrugated pipes. The pipes have an outer corrugated wall for strength and an inner smooth wall for easy cable insertion. Dimensions and material properties are listed for pipe sizes ranging from 32/40mm to 135/160mm. Fittings including tees, elbows, and clamps are also available from the manufacturer in select sizes to facilitate cable installations.

Uploaded by

Anand Das
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
1K views2 pages

HDPE Corrugated Pipe Specs

This document provides specifications for high density polyethylene (HDPE) double walled corrugated pipes. The pipes have an outer corrugated wall for strength and an inner smooth wall for easy cable insertion. Dimensions and material properties are listed for pipe sizes ranging from 32/40mm to 135/160mm. Fittings including tees, elbows, and clamps are also available from the manufacturer in select sizes to facilitate cable installations.

Uploaded by

Anand Das
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

DATA SHEET

NAME OF THE PRODUCT: HDPE DOUBLE WALLED CORRUGATED PIPES


OUTER WALL: CORRUGATED FOR GREATER COMPRESSION STRENGTH
INNER WALL: SMOOTH SURFACE FOR EASY INSERTION OF CABLES
COLOR: ORANGE OR BLACK
JOINTS: SNAP FIT COUPLERS
MATERIAL: HIGH DENSITY POLYETHYLENE
TYPE: NON FLAME RETARDENT
CLASSIFICATION: 1. RESISTANCE TO IMPACT: NORMAL DUTY
2. RESISTANCE TO BENDING: PLIABLE
3. RESISTANCE TO CHEMICAL ATTACK: WITHOUT PROTECTION
SPECIFICATION: AS PER IS: 16205: PART 24: Conduit System For Cable Management-
Part 24 Particular Requirements conduit Systems Buried Under Ground

DIMENSIONS:
NOMINAL MM 32/40 38/50 51/63 63/75 75/90 95/110 102/120 135/160
SIZE
OD MM 40.5 50.5 63.5 75 90 110 120 160
ID MM 33 39 51 63 75 95 102 135
MIN MM 600 700 1100 1900 1900 3300 3300 3300
BENDING
RADIUS

COMPRESSION STRENGTH: LIGHT DUTY 450N


EXTERNAL INFLUENCE: IP- 67
COILS: 100 MTR, 200 MTR
We at Promagic Extrusions have developed a wide variety of fittings for
exclusive DWC pipe uses such as Tee, Elbow, Four Way, Clamps.
These fittings are made from High Density Polyethylene so as to achieve the
same life as that of the DWC pipe.
These have helped highly where there are requirement of many inlets and
outlets of cables such as street light poles, solar panel installation.
We have designed special clamps for the DWC pipes as the conventional steel
clamps are not able to hold the DWC pipe, the special protrusions developed
inside of the clamp gets entangled in the corrugation of the DWC pipes and
once fixed to the wall do not allow the pipe to move or loosen the grip on the
pipe. Available for 32x40mm, 38x50mm, 51x63mm sizes.

Available Fittings Chart


Name 32x40 38x50 51x63 63x75 75x90 95x110 102x120 135x160
mm mm mm mm mm mm mm mm
Coupler √ √ √ √ √ √ √ √
Tee √ √ √ - - - - -
Four Way √ √ √ - - - - -
Elbow √ √ √ - - - - -
Coupler √ √ √ - - - - -
Clamp √ √ √ - - - - -

You might also like