Scribd
Upload
28 views1 page

Automig 80s G Tigfil 80s G

This document provides information on Automig 80S-G and Tigfil 80S-G welding wires, which are copper-coated low alloy steel wires suitable for welding medium strength steels. The wires have good rust and scale tolerance and produce welds that are resistant to cold cracking. They are recommended for welding steels with operating temperatures up to 500°C, such as pipelines and pressure vessels. Typical applications include welding Mn-0.5 Mo steel and repairing medium strength steel castings.

Uploaded by

vijaysvm999
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
28 views1 page

Automig 80s G Tigfil 80s G

This document provides information on Automig 80S-G and Tigfil 80S-G welding wires, which are copper-coated low alloy steel wires suitable for welding medium strength steels. The wires have good rust and scale tolerance and produce welds that are resistant to cold cracking. They are recommended for welding steels with operating temperatures up to 500°C, such as pipelines and pressure vessels. Typical applications include welding Mn-0.5 Mo steel and repairing medium strength steel castings.

Uploaded by

vijaysvm999
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

GMAW/GTAW LOW ALLOY STEEL (High Strength)

AUTOMIG 80S-G / TIGFIL 80S-G


MEDIUM STRENGTH COPPER COATED LOW ALLOY STEEL WIRE

CLASSIFICATION : AWS A/SFA 5.28 APPROVALS :


Automig 80S-G: ER80S-G -
Tigfil 80S-G: ER80S-G -

KEY FEATURES :
• Copper coated low alloy steel solid filler wire & rod • Weld deposit is resistant to cold cracking
• Characterized by smooth and shiny welds • Recommended with 100% CO2 shielding gas
• Uniform copper coating • Radiographic quality even over poor cleaned
• Provide good wetting, rust and scale tolerance base metals
GMAW: DCEP
WELDING POSITION :
GTAW: DCEN
Shielding Gas Gas Flow Rate, LPM Stickout, mm
GMAW: CO2 12-18 10-20
GTAW: Ar 10-15 -

TYPICAL APPLICATIONS :

• Welding of Mn-0.5 Mo steel • Suitable for a wide range of base metals such
• Pipelines and pressure vessels with operating as problem steels containing high sulfur to the
temperatures of about 500°C basic carbon and low alloy Cr-Mo base metals
• Repair of medium strength steel castings
STORAGE / HANDLING :

Keep dry and follow handling instructions mentioned on the box

CHEMICAL COMPOSITION OF BARE SOLID WIRE, Wt% :


C Mn Si Mo S P
Typical 0.09 1.6 0.6 0.4 0.01 0.01

MECHANICAL PROPERTIES OF ALL WELD METAL :


UTS, MPa YS at 0.2% offset, EL% CVN Impact at
Condition
MPa -30°C, J
Typical As Welded 600 540 24 40
Mechanical properties will vary with the type of shielding gas used.

PACKING DATA :
Ø, mm Kg/Spool
Automig 80S-G 1.2 15
1.6 15
Ø x L, mm Primary Box, Kg No. of Primary Boxes Net Wt. of Carton, Kg
1.6 x 1000 5 4 20
Tigfil 80S-G
2.0 x 1000 5 4 20
2.5 x 1000 5 4 20

www.adorwelding.com

You might also like