Scribd
Upload
60 views2 pages

Isaac Newton (EN)

The DP2 Cable Laying / Trenching Support Vessel has a deadweight of 12,500 tons and capabilities for installing up to 10,700 tons of cable. It is equipped with two turntables, one above deck with 7,400 ton capacity and one below deck with 5,000 ton capacity, as well as tensioners and auxiliary cable laying equipment. The vessel also has dynamic positioning, propulsion power of 6,000 kW, and a bollard pull of 100 tons. It was built in 2015 and can accommodate 75 people.

Uploaded by

neagrigore7648
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
60 views2 pages

Isaac Newton (EN)

The DP2 Cable Laying / Trenching Support Vessel has a deadweight of 12,500 tons and capabilities for installing up to 10,700 tons of cable. It is equipped with two turntables, one above deck with 7,400 ton capacity and one below deck with 5,000 ton capacity, as well as tensioners and auxiliary cable laying equipment. The vessel also has dynamic positioning, propulsion power of 6,000 kW, and a bollard pull of 100 tons. It was built in 2015 and can accommodate 75 people.

Uploaded by

neagrigore7648
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Isaac Newton.

JANDENUL.COM
Isaac Newton.
DP2 Cable Laying / Trenching Support Vessel

TECHNICAL SPECS In the Cable Laying mode, the vessel can install up to 10,700 ton of cable and is thereto equipped
with a 7,400 ton capacity turntable above deck and a 5,000 ton capacity turntable below deck
along with two tensioners of 20 ton or as required by the project, chute and auxiliary equipment.
Deadweight 12,500 ton
Turntable capacity 5,000 ton + 7,400 ton
Length o.a. 138.0 m
Breadth 32.0 m
Draught loaded 7.3 m
Dynamic positioning DP2
Propulsion power 2 x 3,000 kW
Bow thruster power 2 x 1,500 kW
Retractable thruster power 2,000 kW
Total installed diesel power 12,330 kW
Bollard pull 100 ton
Speed 12.5 kn
Notation Strengthbottom
Accommodation 75
Built in 2015

SPECIFICATIONS OF THE TURNTABLES


ABOVE DECK UNDER DECK
Capacity 7,400 ton 5,000 ton Max. speed at inner diameter 900 m/h
Inside outer basket diameter 27.4 m 23.5 m Ramp up to max. speed 45 s
Inner basket diameter 8m 4.6 m Loading tower tensioner 5 Te
Basket wall height (open structure) 7m 4.5 m Deck tensioner 20 Te

SPECIFICATION OFFSHORE KNUCKLE BOOM ACTIVE HEAVE COMPENSATION CRANES


AFT CRANE FORE CRANE
Main Aux Main
Capacity 500 kN @ 15 m 50 kN @ 35 m 250 kN @ 15 m
350 kN @ 35 m 100 kN @ 35 m
Max AHC load 350 kN @ 35 m 25 kN @ 35 m 100 kN @ 35 m
Waterdepth 200 m 200 m 200 m
Personnel handling x x
27 April 2020 3:36 pm

The content of this document is provided strictly for information purposes only.
Whilst it has been endeavoured to procure completeness and accuracy, no ­warranty
JANDENUL.COM - express or implied - is given, in particular of fitness for a particular purpose. In
no event any Jan De Nul Group company will be liable for any whatsoever damages
arising directly or indirectly from the use of or reliance on the content provided here-
in, even if (previous) advice has been given/received that such damages may occur.

You might also like