www.amazon.
com/dp/B074ZQGZ8B
• COLLECT KEEPSAKE CORKS: The G.
Francis Decorative Wine Glass Wire Cork
Display Holder – 12” Inch Container 45+
Capacity, Cork Collector Countertop
Catcher Cage stores keepsake wine or
champagne corks
• GORGEOUS DESIGN FOR ANY SETTING:
Beautifully designed multi-colored
ornamentation and styling that
seamlessly complements any décor and
looks lovely in your kitchen, bar, or
dining room
• DURABLE CONSTRUCTION: Steel
construction painted dark brown with
protective finish
• PERFECT SIZE: Measures 12” inches
(30.5cm) tall; Oversized to hold over 45
corks
• GREAT GIFT IDEA: This holder makes a
great gift for the wine or champagne
lover in your life or can easily dress up
any room and function as a dinner party
table centerpiece
www.amazon.com/dp/B073JX252V
• EFFORTLESSLY OPEN YOUR FAVORITE
DRINKS: The G. Francis Wall-Mounted Beer
Bottle Opener 2-Pack – Natural Light Brown
Wood with Strong Earth Magnet Cap Catcher
& Hardware opens bottles and catches each
cap as they fall by a hidden magnet
• NO MESS, NO CLEANUP: The hidden earth
magnet can hold over 60 bottle caps, so
there is zero mess
• GREAT COLOR: Zinc alloy beer opener and
classic light natural brown wood finish base
style that matches any room’s décor;
Package includes 1 opener with wooden
base and 1 opener with hardware only
• EASY TO MOUNT: Install immediately on any
magnetic surface for a hold that won't slip
while unbottling; Free hardware set included
• PERFECT GIFT: Makes a great go-to gift for
housewarmings, birthdays, and Father’s Day
www.amazon.com/dp/B077VVWGM8
• PLANT MORE IN LESS TIME: The 7Penn Rapid
Planter takes out all of the guesswork in planting
bulbs; Simply drill as far as the auger will go and lift
the auger out of the hole – it is that simple! Drill
required, not included
• SAVE YOUR BACK: Has a generous 24-inch (61cm)
length that eliminates constantly bending over
while drilling; No need to worry about rocky
landscapes, because this rapid planter drills through
loose, rocky material so you can plant bulbs and
bedding plants anywhere you want; Not for use
with large or solid rock
• VARIOUS APPLICATIONS: This rapid planter is the
professional landscapers’ choice for dramatically
increasing efficiency when planting bulbs, 3-inch
(7.6cm) potted plants, vegetables, flowers, bare
root trees and shrubs, tilling soil or planter boxes,
mixing seed, soil, fertilizer, paint, or batches of
mortar mix for hardscapes; Effortlessly dig post
holes or even bring it on vacation to drill a hole in
sand to anchor your beach umbrella
• EASY TO USE: Use a 3/8-inch or larger drill on low
(slow) speed, drill into soil or applicable landscape
straight down 24 inches, and lift out of hole; 18V or
greater drill recommended; For cordless drills a 14V
drill minimum is recommended; Keep auger clean
from soil and debris when not in use
• BUILT TO LAST: 3/8-inch (1cm) steel shaft with non-
slip hex drive; 3-inch (7.6cm) diameter x 24-inch
(61cm) length; 12 inches (30.5cm) of durable 10-
gauge flighting on a heavy duty 3/8-inch steel shaft
with glossy black painted finish
Forestry Safety Helmet
Whether you are welding, automotive painting, doing construction work, mining, or general manufacturing, you
need top-quality protection. The Felled | Forestry Safety Helmet meets safety standards and protects your head,
face, and ears while performing the toughest jobs.
Safety Features
The clear polycarbonate (PC) visor is impact resistant, provides full face protection, and conforms to CE EN 166
1B for safety. Keep the air flowing by swapping out the visor with the included mesh face screen.
The earmuffs are lightweight and are noise reducing (NRR: 30db SNR: 23db). They are completely metal-free,
include comfortable soft PVC ear cushions, and conform to CE EN 352-3 and ANSI S3.19 for acoustical noise
reduction.
The safety helmet is lightweight and includes top vents to keep you cool. This 6-point suspension helmet was
designed with comfort in mind! It is a high-density impact-resistant cap that has a polypropylene (PP) shell and
a comfortable fabric head cradle that makes this helmet conform to ANSI Z89.1 and CE EN397:2012+A1:2012
safety standards.
Assembly Parts
1 2 3
4 6 7
Page 4 FLD-8136 | getfelled.com
Assembly Instructions
Step 1: Attach the end taps on Step 2: Fold the 4 attachment tabs
Part 2 straight across on the inside on Part 3 upwards along the folding
lining of Part 1 from side to side. line.
Step 3: Attach the 4 tabs (facing upwards) Step 4: Attach both ear muffs (Part 4) to the
on Part 3 to the 4 points on Part 1 until each top of either side of Part 1 until it snaps into
tab snaps into place. place with the ear muffs in the upward position
(they will be able to flip downwards after
installation).
Step 5: Be sure that the front nobs on Step 6: Attach either Part 6 or Part 7 to the
Part 5 are facing downward and slide front of Part 5 (turn nobs on Part 5 to secure
Part 5 ends into both ear muff pieces. in place).
Page 5 FLD-8136 | getfelled.com
Dog Obstacle Agility Training Kit
Hurdle Weaving Poles Tunnel
: Turn the pegs into the lateral : Loosen ligaments around the
crossbar rods and remove end caps. tunnel to open. CAUTION: Tunnel is
under tension and opens by itself.
: Adjust the holder to the
desired height and tighten screws. : Anchor the tunnel with
corresponding pegs.
: Insert
the bars at a
distance of the : Rotate the pegs in the bar
crossbar into and remove the protective cap. Have a second person
the ground and accompany the first training by
then insert the : Use the guide to align the standing stand in front of the tunnel to
crossbar into bars about 23.5 inches (60cm) apart in make sure that the dog stands still.
the mount. a straight line. The colorful threads on The first person should go to the end
the rope indicate the distance. of the tunnel and lure the dog with a
: Fasten the selected command such as “Tunnel”
jump ring using the so your dog runs through the tunnel.
secure hook-and-loop : Build an alley that the dog
attachment strips If your dog runs through the
can walk through without touching. tunnel, stand at one end of the tunnel
between the bars. Direct your dog with a leash through with your dog and send command
the alley, then motivate your dog with your dog through it while you run
a ball to walk through the alley. You along the side of the tunnel.
: Place the crossbar should alternately walk on the left and
approximately 4 inches (10cm) above right side of the alley. Gradually send
the ground. Then jump over the bar the dog to the alley at different angles.
together with your dog. Slowly Use a selected command when your
increase the height. dog runs into the alley.
: As soon as the dog gains
confidence, lure them with a treat to
jump over the obstacle. Do this while
giving a command such as “Hurdle”.
: Once the first step is
Notes
: Stand in front of the hurdle
mastered, slowly start to shorten the
with your dog and command them • Do not over-train your dog.
distance between the rows (push away
with your selected command (from
the rows from each other) until the • The training hurdle is not suitable
Step 2) to jump over the hurdle. Walk dog touches the bar rods while for puppies or young dogs.
on the side while doing this. walking through it.
• Go back to the steps that are
: Attach the jump ring and
problem areas for your dog and
repeat Step 2. If your dog completes
practice until your dog has mastered
these tasks, continue to Step 3.
the step safely.
: Have your dog : Move the rows into a straight • Training should always end with a
sit in the pause box and line and have your dog weave positive experience. Tell your dog
use the command “Stay” between them. that they are indeed a good girl or
when between obstacles.
boy and toss them a treat for their
hard work!
MIMU-0234 | www.mimu.online
