Scribd
Upload
21 views

E5 CLT

Cross-laminated timber (CLT) is a type of mass timber made from multiple layers of lumber stacked crosswise and bonded together with structural adhesive. Element5 manufactures CLT panels made from sustainably sourced spruce-pine-fir lumber in their certified facility in Ontario, Canada. The CLT panels come in various grades, widths up to 3.4m, lengths up to 15.8m, and thicknesses up to 380mm. Element5's CLT meets the PRG320-2019 certification standard.

Uploaded by

baesuhoon
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
21 views

E5 CLT

Cross-laminated timber (CLT) is a type of mass timber made from multiple layers of lumber stacked crosswise and bonded together with structural adhesive. Element5 manufactures CLT panels made from sustainably sourced spruce-pine-fir lumber in their certified facility in Ontario, Canada. The CLT panels come in various grades, widths up to 3.4m, lengths up to 15.8m, and thicknesses up to 380mm. Element5's CLT meets the PRG320-2019 certification standard.

Uploaded by

baesuhoon
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

CROSS-LAMINATED

TIMBER (CLT)

CLT from Element5


• PRG320-2019 Certified
• V2 and E1 Grades
• SPF (Spruce, Pine, Fir)
• Up to 3.4m (11.1 ft) in width
x 15.8m (51.8 ft) in length
• Attractive, edge-glued panels
CLT
Cross-laminated timber offers a sustainable, cost-effective, and human centered
construction alternative to concrete and steel. CLT can be used in many structural
applications including floors, walls, roofs, shearwalls, elevator cores, and stairs.

Manufactured and tested to PRG320-2019. Our St. Thomas, Ontario, Canada


Certification facility is 3rd party certified to meet the certification requirements of the certifying
body to manufacture cross laminated timber

Grades Available V2, E1


3.4m / 2.5m (11.1 ft / 8.2 ft) Finished Width
Optimal Panel Width* Maximum Finished Width Visual Panels: 3.1m (10.1 ft) if machine
other widths available sanded or 3.4m (11.1 ft) if hand sanded at additional cost
on request Note: 3.4m (11.1 ft) wide panels trigger oversize loads and
additional shipping cost
Panel Width Tolerance +/- 3mm (1/8”) of panel width

Panel Length Maximum: 15.8m (51.8 ft) / Minimum: 8m (26.2 ft)

Panel Length Tolerance +/- 3mm (1/8”) of panel length

Maximum Panel Thickness 380mm (15”)


Element5 is a mass Panel Thickness Tolerance +/- 1.5mm (1/16”) or 2% of panel thickness, whichever is greater
timber manufacturer At least three layers of bonded single-layer panels
Panel Design
offering an integrated arranged at right angles to each other

suite of products and Surface Classification Two Side Visual, One Side Visual, Non-Visual

services to support Panel Edges Standard square edges

mass timber projects Wood Species SPF (spruce-pine-fir), other species upon request

Lumber Sorting Grade No. 1 / No. 2, other grades available upon request
across Canada, the
Moisture Content 12% ± 3% at time of production
USA and internationally.
Two Part adhesive for finger joining and Purbond
Our fully automated, Bonding Adhesive
polyurethane adhesive face bonding
state-of- the-art Visual Quality
Two Side Visual and One Side Visual Surfaces
are always sanded on exposed face
factory in St. Thomas,
For determining transport weight:
Ontario produces Weight
approximately 470kg/m3 (30lb / ft3)
visually superior, edge- Squareness Panel face diagonals shall not deviate by more than 3mm (1/8”)

glued CLT panels Straightness


Deviation of edges from a straight line between
corner points shall not exceed 1.5mm (1/16”)
made from sustainably
sourced SPF lumber. L Panels (surface layers parallel to panel length)

LAYERS DEPTH (mm/inches) T L L T L T L T L

3 PLY 87 /3 7/16” 35 17 35

3 PLY 105 /4 1/8” 35 35 35

5 PLY 139 /5 1/2” 35 17 35 17 35

5 PLY 175 /6 7/8” 35 35 35 35 35

7 PLY 191 /7 1/2” 35 17 35 17 35 17 35

7 PLY 245 /9 5/8” 35 35 35 35 35 35 35

9 PLY 315 /12 3/8” 35 35 35 35 35 35 35 35 35

C Panels (surface layers perpendicular to panel length)

LAYERS DEPTH (mm/inches) T L L T L T L T L

3 PLY 87 /3 7/16” 35 17 35

3 PLY 105 /4 1/8” 35 35 35

5 PLY 139 /5 1/2” 35 17 35 17 35


CONTACT US:
5 PLY 175 /6 7/8” 35 35 35 35 35
[email protected]
7 PLY 191 /7 1/2” 35 17 35 17 35 17 35
1-888-670-7713
7 PLY 245 /9 5/8” 35 35 35 35 35 35 35
www.elementfive.co
9 PLY 315 /12 3/8” 35 35 35 35 35 35 35 35 35

You might also like