Manufacturer’s Declaration of Conformity

Directive: Low Voltage Directive 73/23/EEC, as amended: 93/68/EEC

Manufacturer:

Reliance Electric Company, Inc.

24800 Tungsten Rd.
Cleveland, Ohio 44117 - USA

declares that the Product(s): FlexPak 3000, Speed Controller for Electric Motors

Model Numbers: 1FNxyz2 2FNxyz2 3FNxyz2 5FNxyz2 7FNxyz2 10FNxyz2 15FNxyz2

20FNxyz2 25FNxyz2 30FNxyz2 40FNxyz2 50FNxyz2 75FNxyz2 100FNxyz2
125FNxyz2 150FNxyz2 200FNxyz2 250FNxyz2 300FNxyz2

1FRxyz2 2FRxyz2 3FRxyz2 5FRxyz2 7FRxyz2 10FRxyz2 15FRxyz2

20FRxyz2 25FRxyz2 30FRxyz2 40FRxyz2 50FRxyz2 75FRxyz2 100FRxyz2
125FRxyz2 150FRxyz2 200FRxyz2 250FRxyz2 300FRxyz2

FN = S6 power conversion FR = S6R power conversion

x = ac line voltage: 2 = 230 volts, 3 = 380 - 415 volts, 4 = 460 volts, 7 = integrator version
y = enclosure: 0 = chassis version, 7 = integrator version
z = software version: 0-9,A-Z

Option Kit Model Numbers: AC Line Disconnect Kits: 901FKxxxx Dynamic Braking Kits: 908FKxxxx, 909FKxxxx
Blower Motor Starter Kits: 902FKxxxx Field Current Regulator Kits: 911FKxxxx
Enhanced Field Supply Kits: 903FKxxxx Input/Output Expansion Kit: 914FK0101
Remote OIM Mounting Kit: 905FK0101 AutoMax Network Kit: 915FK0101
Inverting Fault C/B Kits: 906FKxxxx Device Net Interface Kit: 915FK1101
Pulse Tach Feedback Kit: 907FK0101 230VAC Conversion Kits: 916FK0x00
AC Tach Feedback Kit: 907FK0301 115VAC Control Interface Kit: 917FK0101

x = numeral: 0-9

when installed in accordance with the installation instructions contained in the product documentation are in conformity with the essential health
and safety requirements of the Low Voltage Directive 73/23/EEC, as amended: 93/68/EEC;

and that the following harmonized standards and specifications have been used:

EN 60204 Safety of Machinery - Electrical Equipment of Machines

EN 1050 Safety of Machinery - Principles for Risk Assessment
EN 292 Safety of Machinery - Basic Concepts, General Principles for Design
EN 1037 Safety of Machinery - Isolation and Energy Dissipation -Prevention of Unexpected Start-up

Also the following other standards and specifications have been used:

Reliance Standard Procedure RSP-2-0090-04-545-18.25 Safety Practice for Drive Equipment

Manufacturer

Signature:

Name: Thomas Cahill

Position: Standard DC Drives Development Manager

Date 31-Oct-96
D2-3397
 Manufacturer’s Declaration of Incorporation
Directive: Machinery Directive 89/392/EEC, as amended: 93/41/EEC and 93/68/EEC

Manufacturer:

Reliance Electric Company, Inc.

24800 Tungsten Rd.
Cleveland, Ohio 44117 - USA

declares that the Product(s): FlexPak 3000, Speed Controller for Electric Motors

Model Numbers: 1FNxyz2 2FNxyz2 3FNxyz2 5FNxyz2 7FNxyz2 10FNxyz2 15FNxyz2

20FNxyz2 25FNxyz2 30FNxyz2 40FNxyz2 50FNxyz2 75FNxyz2 100FNxyz2
125FNxyz2 150FNxyz2 200FNxyz2 250FNxyz2 300FNxyz2

1FRxyz2 2FRxyz2 3FRxyz2 5FRxyz2 7FRxyz2 10FRxyz2 15FRxyz2

20FRxyz2 25FRxyz2 30FRxyz2 40FRxyz2 50FRxyz2 75FRxyz2 100FRxyz2
125FRxyz2 150FRxyz2 200FRxyz2 250FRxyz2 300FRxyz2

FN = S6 power conversion FR = S6R power conversion

x = ac line voltage: 2 = 230 volts, 3 = 380 - 415 volts, 4 = 460 volts, 7 = integrator version
y = enclosure: 0 = chassis version, 7 = integrator version
z = software version: 0-9,A-Z

Option Kit Model Numbers: AC Line Disconnect Kits: 901FKxxxx Dynamic Braking Kits: 908FKxxxx, 909FKxxxx
Blower Motor Starter Kits: 902FKxxxx Field Current Regulator Kits: 911FKxxxx
Enhanced Field Supply Kits: 903FKxxxx Input/Output Expansion Kit: 914FK0101
Remote OIM Mounting Kit: 905FK0101 AutoMax Network Kit: 915FK0101
Inverting Fault C/B Kits: 906FKxxxx Device Net Interface Kit: 915FK1101
Pulse Tach Feedback Kit: 907FK0101 230VAC Conversion Kits: 916FK0x00
AC Tach Feedback Kit: 907FK0301 115VAC Control Interface Kit: 917FK0101

x = numeral: 0-9

is intended to be incorporated into machinery or to be assembled with other machinery to constitute machinery covered by
Directive 89/392/EEC, as amended: 93/41/EEC and 93/68/EEC;

and that the following harmonized standards and specifications have been used:

EN 60204 Safety of Machinery - Electrical Equipment of Machines

EN 1050 Safety of Machinery - Principles for Risk Assessment

Also the following national technical standards and specifications have been used:

Reliance Standard Procedure RSP-2-0090-04-545-18.25 Safety Practice for Drive Equipment

Reliance Standard Practice RSP-3-0090-04-545-49.19 Reliance Approach to Conformance to The EU/EEA Directives

and furthermore declares that the Product(s) covered by this Declaration must not be put into service until the machinery into
which it is to be incorporated or of which it is a component has been found and declared to be in conformity with the
provisions of Directive 89/392/EEC and with national implementing legislation, i.e. as a whole, including the Product(s) referred
to in this Declaration.

Manufacturer

Signature:

Name: Thomas Cahill

Position: Standard DC Drives Development Manager

Date: 31-Oct-96

D2-3397
 Manufacturer’s Declaration of Conformity

Directive: EMC Directive 89/336/EEC, as amended: 92/31/EEC and 93/68/EEC

Manufacturer: Reliance Electric Company, Inc. Authorized Representative Rockwell Automation Limited
24800 Tungsten Rd. in the Community(and location Halesfield 19, Telford
Cleveland, Ohio 44117 - USA of the Responsible Person): Shropshire TF7 4PT
United Kingdom

declare that the Product(s): FlexPak 3000, Speed Controller for Electric Motors

Model Numbers: 1FNxyz2 2FNxyz2 3FNxyz2 5FNxyz2 7FNxyz2 10FNxyz2 15FNxyz2

20FNxyz2 25FNxyz2 30FNxyz2 40FNxyz2 50FNxyz2 75FNxyz2 100FNxyz2
125FNxyz2 150FNxyz2 200FNxyz2 250FNxyz2 300FNxyz2

1FRxyz2 2FRxyz2 3FRxyz2 5FRxyz2 7FRxyz2 10FRxyz2 15FRxyz2

20FRxyz2 25FRxyz2 30FRxyz2 40FRxyz2 50FRxyz2 75FRxyz2 100FRxyz2
125FRxyz2 150FRxyz2 200FRxyz2 250FRxyz2 300FRxyz2

FN = S6 power conversion FR = S6R power conversion

x = ac line voltage: 2 = 230 volts, 3 = 380 - 415 volts, 4 = 460 volts, 7 = integrator version
y = enclosure: 0 = chassis version, 7 = integrator version
z = software version: 0-9,A-Z

Option Kit Model Numbers: AC Line Disconnect Kits: 901FKxxxx Dynamic Braking Kits: 908FKxxxx,
Blower Motor Starter Kits: 902FKxxxx 909FKxxxx,
Enhanced Field Supply Kits: 903FKxxxx 912FKxxxx,
Inverting Fault Circuit Breaker Kits: 906FKxxxx 913FKxxxx
Pulse Tachometer Feedback Kit: 907FK0101 Input/Output Expansion Kit: 914FK0101
AC Tach Interface Kit: 907FK0301 AutoMax Network Kit: 915FK0101
Field Current Regulator Kits: 911FKxxxx

x = numeral: 0-9

when installed in accordance with the installation instructions contained in the product documentation are in conformity with the protection
requirements of the EMC Directive 89/336/EEC, as amended: 92/31/EEC and 93/68/EEC;

and that the following harmonized standards and specifications have been used:

Conformance via a TCF based on test results using in whole or in parts the following harmonized standards:

EN 50081-1 (1992) Electromagnetic Compatibility - Generic Emission Standard Part 1: Commercial, Residential, Light Industrial
EN 50082-2 (1995) Electromagnetic Compatibility - Generic Immunity Standard Part 2: Industrial

TCF No: ER 3020

Technical Information is maintained at: Competent Body:

Reliance Electric Company, Inc. TRL EMC Ltd.

24800 Tungsten Rd. Long Green, Forthampton
Cleveland, Ohio 44117, USA Gloucester GL19 4QH, Great Britain
Competent Body Assessment Certificate Number: 3241/2538

Manufacturer Authorized Representative in the Community

through its Responsible Person

Signature: Signature:

Name: Thomas Cahill Name: David Challinor

Position: Standard DC Drives Development Manager Position: Director - Telford Operations

Date: 31-Oct-96 Date: 31-Oct-96

D2-3397