Scribd
Upload
34 views

4.3.2 Current in Circuits

In a series circuit, the current has the same value at any point because the same number of electrons flow through each part of the closed loop. The current depends on the voltage of the power source and number/type of components. Current increases with higher voltage and decreases with more components. In a parallel circuit, the current splits across separate branches. At a junction, the current flowing in equals the current flowing out due to charge conservation. While the total current remains the same, some electrons flow down one branch while others flow down another branch. To find the current through one branch of a parallel circuit, use junctions and conservation of current. The total current flowing into a junction equals the total flowing out, so

Uploaded by

Ishimwe Habiyakare
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
34 views

4.3.2 Current in Circuits

In a series circuit, the current has the same value at any point because the same number of electrons flow through each part of the closed loop. The current depends on the voltage of the power source and number/type of components. Current increases with higher voltage and decreases with more components. In a parallel circuit, the current splits across separate branches. At a junction, the current flowing in equals the current flowing out due to charge conservation. While the total current remains the same, some electrons flow down one branch while others flow down another branch. To find the current through one branch of a parallel circuit, use junctions and conservation of current. The total current flowing into a junction equals the total flowing out, so

Uploaded by

Ishimwe Habiyakare
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 3

4.3.

2 Current in Circuits
Current in Series Circuits
 In a circuit that is a closed-loop, such as a series circuit, the current is the same value at any point

o This is because the number of electrons per second that passes through one part of the circuit is the same
number that passes through any other part
 This means that all components in a closed-loop have the same current

The current is the same at each point in a closed-loop

 The amount of current flowing around a series circuit depends on two things:
o The voltage of the power source
o The number (and type) of components in the circuit

 Increasing the voltage of the power source drives more current around the circuit
o So, decreasing the voltage of the power source reduces the current
 Increasing the number of components in the circuit increases the total resistance
o Hence less current flows through the circuit

Current will increase if the voltage of the power supply increases, and decreases if the number of components increases
(because there will be more resistance)

Current in Parallel Circuits

 A parallel circuit consists of two or more components attached along separate branches of the circuit
Diagram showing two bulbs connected in parallel

 The advantages of this kind of circuit are:


o The components can be individually controlled, using their own switches
o If one component stops working the others will continue to function
 In a parallel circuit, the current splits up - some of it going one way and the rest going the other
 This means that the current in each branch will be smaller than the current from the power supply

EXTENDED

 At a junction in a parallel circuit (where two or more wires meet) the current is conserved
o This means the amount of current flowing into the junction is equal to the amount of current flowing out of it
 This is because charge is conserved

 Note that the current does not always split equally – often there will be more current in some branches than in others
o The current in each branch will only be identical if the resistance of the components along each branch
are identical
 Current behaves in this way because it is the flow of electrons:
o Electrons are physical matter – they cannot be created or destroyed
o This means the total number of electrons (and hence current) going around a circuit must remain the same
o When the electrons reach a junction, however, some of them will go one way and the rest will go the other

Current is split at a junction into individual branches

Worked Example
In the circuit below, ammeter A0 shows a reading of 10 A, and ammeter A1 shows a reading of 6 A.
What is the reading on ammeter A2?

Step 1: Recall that at a junction, the current is conserved


o This means that the total amount of current flowing into a junction is equal to the total amount flowing out

Step 2: Consider the first junction in the circuit where current splits


o The diagram below shows the first junction in the circuit

Step 3: Calculate the missing amount of current


o Since 10 A flows in to the junction (the total current from the battery), 10 A must flow out of the junction
o The question says that 6 A flows through ammeter A1 so the remaining current flowing through ammeter
A2 must be:

10 A − 6 A = 4 A


o Therefore, 4 A flows through ammeter A2

Exam Tip
The direction of current flow is super important when considering junctions in a circuit. You should remember that current flows
from the positive terminal to the negative terminal of a cell / battery. This will help determine the direction current is flowing 'in'
to a junction and which way the current then flows 'out'.

You might also like