Tank Equipment

Edition 3.0
 AWH Tank Equipment Contents

Table of Contents

Page
AWH Tank Equipment Contents 3
AWH-Connect DIN 11864-2 Nut Flange and Accessories 4
AWH-Connect and Accessories 14
AWH-Manlid Technical Information 38
P11 - Manlid with conical Frame 39
P11 - Manlid with flat Frame 40
P11 - Manlid with low Frame 41
P22 - Pressure Manlid 42
P23 - External Manlid with one Handle 43
P31 - Non-pressure Dome Lid, hygienic 44
P31 - Non-pressure Dome Lid, hygienic, with double Handle 46
P33 - Dome Lid, hygienic 47
P33 - Non-pressure Dome Lid, hygienic 48

* An asterisk in the pricing column means: on request

The dimensions listed in the catalog are in mm and are nominal dimensions.
The specified weights are approximate weights.

Edition 3.0 3
 AWH-Connect DIN 11864-2 Nut Flange and Accessories

The AWH-Connect is an aseptic and hygienic connection for containers. It was developed for the high requi-
rements of the pharmaceutical and biotechnological industry, as well as those of the food industry. By using
AWH-Connect 11864 instead of the classic AWH-Connect, hygiene is significantly improved due to the proven
O-ring seal.

The AWH-Connect 11864-2 connection, compliant with the Pressure Equipment Directive, has been issued a
PMA approval by DVS according to EN 13445 as well as AD2000-Merkblatt. Corresponding certificates can be
provided on request.

Technical Parameters

Standard Designed in accordance with the requirements of the Pressure Equipment Directive 2014/68/EU, EN 13445 and AD2000-
Merkblätter.

Materials Block flange: 1.4404; 1.4539; 1.4435 BN2 (Delta-Ferrit: ≤ 1,0%)

DIN EN 10272

Thread bolts / cap nuts / A4-70 / A4-50

in conformity withe the PED DIN EN ISO 3506-1 / -2
2014/68/EU:

Surfaces Hygienic class: H3 (Standard) H4 (Optional) H5 (Optional)

Surfaces in contact with product: Ra ≤ 0,8 µm Ra ≤ 0,4 µm Ra ≤ 0,25 µm
other Surfaces : Ra ≤ 1,0 µm Ra ≤ 1,0 µm Ra ≤ 1,0 µm

Operating pressure DN25-40 ; 1“-1½“ DN50-100 ; 2“-4“

-1 to 25 bar -1 to 16 bar
-14,5 to 362,6 psi -14,5 to 232 psi

Operating -10 to +140°C / -14 to 284°F

temperature

Thread bolts / Nuts Thread bolts according to DIN 976-1 with 1x slot according to DIN 551 Cap nuts according to DIN 1587
Manufacturer recognized according to AD2000 Merkblatt (VdTÜV Merkblatt 1253/4) for design conforming to
PED 2014/68/EU

Seals suitable for standard seals according to DIN11864/ DIN11853

Labelling Block flange permanently marked with material, batch no. and manufacturer’s trademark

Documentation Acceptance test certificate 3.1 acc. to EN 10204 | AD2000-W2/W10

Optionally available for welded flange

Delivery / Packaging he product is delivered in a disassembled condition.

Block flange and thread bolts/nuts are all securely packaged separately.
Returns are only possible if the packaging has not been opened! Seals are not included in the scope of delivery.

Options Customized versions in terms of materials, surfaces, Block flange heights etc. can be supplied on request.
Please get in touch with us!

Notes The operating limits (pressure and temperature) for the AWH-Connect depend on both the seal used and the connected component.
The weakest individual component in the connection determines the max. permissible pressure and the max. temperature.
The compatibility of the components to be connected must be checked in advance.
After installing a component, it is to be ensured that the cap nuts are screwed on tightly before applying pressure to the system.
Weight specifications are approximate weights. We reserve the right to make technical changes.

4 Edition 3.0
 AWH-Connect DIN 11864-2 Nut Flange and Accessories

Configuration example

D
C
H F

G
E

A Block flange 11864-2 E Screw kit AWH-Connect 11864 Sight glass/Light

B Screw kit AWH-Connect 11864 F Sight glass for AWH-Connect 11864-2
C Liner flange 11864-2 / 11853-2 G Sight glass AWH-Connect for Sight glass light fitting
D Blind liner flange 11864 H Sight glass light fitting for AWH-Connect 11864

Services

Block Flange Measuring Report

Article No. Description Measuring points Price netto/EUR
1611MP00RA00500 Surface roughness (inner/outer) 5 55,00
1611MP00FE00200 Delta-Ferrite content (inner) 2 45,00

Material Certificates
Description Price netto/EUR
Acceptance test certificate 3.1 / AD2000-W2/W10 15,00

Edition 3.0 5
 AWH-Connect DIN 11864-2 Nut Flange and Accessories

AWH-Connect DIN 11864-2 Nut Flange Series A

max. perm.
DN DIN PN [bar]
D1 D3 L1 LK Pipe-Ø Thread bolts Weight [kg]

10 25 10 54 25 37 13x1,5 4/ M8x25 0,35

10 25 10 54 38 37 13x1,5 4/ M8x25 0,50
10 25 10 54 51 37 13x1,5 4/ M8x25 0,65

15 25 16 59 25 42 19x1,5 4/ M8x25 0,38

15 25 16 59 38 42 19x1,5 4/ M8x25 0,54
15 25 16 59 51 42 19x1,5 4/ M8x25 0,71

20 25 20 64 25 47 23x1,5 4/ M8x25 0,42

20 25 20 64 38 47 23x1,5 4/ M8x25 0,60
20 25 20 64 51 47 23x1,5 4/ M8x25 0,79

25 25 26 70 25 53 29x1,5 4/ M8x25 0,46

25 25 26 70 38 53 29x1,5 4/ M8x25 0,67
25 25 26 70 51 53 29x1,5 4/ M8x25 0,88

32 25 32 76 25 59 35x1,5 4/ M8x25 0,51

32 25 32 76 38 59 35x1,5 4/ M8x25 0,72
32 25 32 76 51 59 35x1,5 4/ M8x25 0,96

40 25 38 82 25 65 41x1,5 4/ M8x25 0,56

40 25 38 82 38 65 41x1,5 4/ M8x25 0,81
40 25 38 82 51 65 41x1,5 4/ M8x25 1,06

50 16 50 94 25 77 53x1,5 4/ M8x25 0,64

50 16 50 94 38 77 53x1,5 4/ M8x25 0,94
50 16 50 94 51 77 53x1,5 4/ M8x25 1,24

65 16 66 113 25 95 70x2,0 8/ M8x25 0,89

65 16 66 113 38 95 70x2,0 8/ M8x25 1,28
65 16 66 113 51 95 70x2,0 8/ M8x25 1,68

80 16 81 133 25 112 85x2,0 8/ M10x35 1,40

80 16 81 133 38 112 85x2,0 8/ M10x35 1,80
80 16 81 133 51 112 85x2,0 8/ M10x35 2,29

100 16 100 159 25 137 104x2,0 8/ M10x35 1,60

100 16 100 159 38 137 104x2,0 8/ M10x35 2,33
100 16 100 159 51 137 104x2,0 8/ M10x35 3,02

6 Edition 3.0
 AWH-Connect DIN 11864-2 Nut Flange and Accessories

AWH-Connect DIN 11864-2 Nut Flange Series A

1.4404 /H3 1.4404 /H4 Fastening kit
DN DIN Price/EUR Article No. Price/EUR Article No. Price/EUR Article No.
10 90,00 162001252 111,00 162001252/H4 15,00 1613M4082580031
10 95,00 162001382 117,00 162001382/H4 15,00 1613M4082580031
10 101,00 162001512 125,00 162001512/H4 15,00 1613M4082580031

15 90,00 162003252 111,00 162003252/H4 15,00 1613M4082580031

15 95,00 162003382 117,00 162003382/H4 15,00 1613M4082580031
15 101,00 162003512 125,00 162003512/H4 15,00 1613M4082580031

20 90,00 162004252 111,00 162004252/ H4 15,00 1613M4082580031

20 95,00 162004382 117,00 162004382/ H4 15,00 1613M4082580031
20 101,00 162004512 125,00 162004512/ H4 15,00 1613M4082580031

25 115,00 162005252 142,00 162005252/ H4 15,00 1613M4082580031

25 129,00 162005382 159,00 162005382/ H4 15,00 1613M4082580031
25 140,00 162005512 173,00 162005512/ H4 15,00 1613M4082580031

32 115,00 162006252 142,00 162006252/ H4 15,00 1613M4082580031

32 129,00 162006382 159,00 162006382/ H4 15,00 1613M4082580031
32 140,00 162006512 173,00 162006512/ H4 15,00 1613M4082580031

40 115,00 162007252 142,00 162007252/ H4 15,00 1613M4082580031

40 129,00 162007382 159,00 162007382/ H4 15,00 1613M4082580031
40 140,00 162007512 173,00 162007512/ H4 15,00 1613M4082580031

50 127,00 162008252 157,00 162008252/ H4 15,00 1613M4082580031

50 141,00 162008382 174,00 162008382/ H4 15,00 1613M4082580031
50 155,00 162008512 191,00 162008512/ H4 15,00 1613M4082580031

65 183,00 162009252 226,00 162009252/ H4 30,00 1623M808252

65 204,00 162009382 251,00 162009382/ H4 30,00 1623M808252
65 225,00 162009512 277,00 162009512/ H4 30,00 1623M808252

80 195,00 162010252 240,00 162010252/ H4 38,00 1623M810352

80 242,00 162010382 298,00 162010382/ H4 38,00 1623M810352
80 285,00 162010512 351,00 162010512/ H4 38,00 1623M810352

100 278,00 162012252 342,00 162012252/ H4 38,00 1623M810352

100 318,00 162012382 392,00 162012382/ H4 38,00 1623M810352
100 334,00 162012512 411,00 162012512/ H4 38,00 1623M810352

Edition 3.0 7
 AWH-Connect DIN 11864-2 Nut Flange and Accessories

AWH-Connect DIN 11864-2 Nut Flange Series C

max. perm.
DN PN [bar]
D1 D3 L1 LK Pipe-Ø Thread bolts Weight [kg]

1/2“ 25 9,4 54 25 37 12,7x1,65 4/ M8x25 0,35

1/2“ 25 9,4 54 38 37 12,7x1,65 4/ M8x25 0,50
1/2“ 25 9,4 54 51 37 12,7x1,65 4/ M8x25 0,65

3/4“ 25 15,75 59 25 42 19,05x1,65 4/ M8x25 0,38

3/4“ 25 15,75 59 38 42 19,05x1,65 4/ M8x25 0,55
3/4“ 25 15,75 59 51 42 19,05x1,65 4/ M8x25 0,71

1“ 25 22,1 66 25 49 25,4x1,65 4/ M8x25 0,44

1“ 25 22,1 66 38 49 25,4x1,65 4/ M8x25 0,63
1“ 25 22,1 66 51 49 25,4x1,65 4/ M8x25 0,82

1 1/2“ 25 34,8 79 25 62 38,1x1,65 4/ M8x25 0,53

1 1/2“ 25 34,8 79 38 62 38,1x1,65 4/ M8x25 0,74
1 1/2“ 25 34,8 79 51 62 38,1x1,65 4/ M8x25 1,02

2“ 16 47,5 92 25 75 50,8x1,65 4/ M8x25 0,64

2“ 16 47,5 92 38 75 50,8x1,65 4/ M8x25 0,98
2“ 16 47,5 92 51 75 50,8x1,65 4/ M8x25 1,23

2 1/2“ 16 60,2 107 25 89 63,5x1,65 8/ M8x25 0,844

2 1/2“ 16 60,2 107 38 89 63,5x1,65 8/ M8x25 1,21
2 1/2“ 16 60,2 107 51 89 63,5x1,65 8/ M8x25 1,58

3“ 16 72,9 125 25 104 76,2x1,65 8/ M10x35 1,33

3“ 16 72,9 125 38 104 76,2x1,65 8/ M10x35 1,68
3“ 16 72,9 125 51 104 76,2x1,65 8/ M10x35 2,20

4“ 16 97,38 157 25 135 101,6x2,11 8/ M10x35 1,63

4“ 16 97,38 157 38 135 101,6x2,11 8/ M10x35 2,32
4“ 16 97,38 157 51 135 101,6x2,11 8/ M10x35 3,01

Fastening kit for AWH-Connect

Thread bolts Nuts Weight [kg]

4/ M8x25 4/ M8 0,067
8/ M8x25 8/ M8 0,160
8/ M10x35 8/ M10 0,308

8 Edition 3.0
 AWH-Connect DIN 11864-2 Nut Flange and Accessories

AWH-Connect DIN 11864-2 Nut Flange Series C

1.4404 /H3 1.4404 /H4 Fastening kit
DN DIN Price/EUR Article No. Price/EUR Article No. Price/EUR Article No.
1/2“ 90,00 162052252 111,00 162052252/H4 15,00 1613M4082580031
1/2“ 95,00 162052382 117,00 162052382/H4 15,00 1613M4082580031
1/2“ 101,00 162052512 125,00 162052512/H4 15,00 1613M4082580031

3/4“ 90,00 162053252 111,00 162053252/H4 15,00 1613M4082580031

3/4“ 95,00 162053382 117,00 162053382/H4 15,00 1613M4082580031
3/4“ 101,00 162053512 125,00 162053512/H4 15,00 1613M4082580031

1“ 115,00 162054252 142,00 162054252/H4 15,00 1613M4082580031

1“ 129,00 162054382 159,00 162054382/H4 15,00 1613M4082580031
1“ 140,00 162054512 173,00 162054512/H4 15,00 1613M4082580031

1 1/2“ 115,00 162057252 142,00 162057252/H4 15,00 1613M4082580031

1 1/2“ 129,00 162057382 159,00 162057382/H4 15,00 1613M4082580031
1 1/2“ 140,00 162057512 173,00 162057512/H4 15,00 1613M4082580031

2“ 127,00 162058252 157,00 162058252/H4 15,00 1613M4082580031

2“ 141,00 162058382 174,00 162058382/H4 15,00 1613M4082580031
2“ 155,00 162058512 191,00 162058512/H4 15,00 1613M4082580031

2 1/2“ 155,00 162059252 191,00 162059252/H4 30,00 1623M808252

2 1/2“ 173,00 162059382 231,00 162059382/H4 30,00 1623M808252
2 1/2“ 190,00 162059512 234,00 162059512/H4 30,00 1623M808252

3“ 183,00 162060252 226,00 162060252/H4 38,00 1623M810352

3“ 204,00 162060382 251,00 162060382/H4 38,00 1623M810352
3“ 225,00 162060512 277,00 162050512/H4 38,00 1623M810352

4“ 278,00 162062252 342,00 162062252/H4 38,00 1623M810352

4“ 318,00 162062382 392,00 162062382/H4 38,00 1623M810352
4“ 334,00 162062512 411,00 162062512/H4 38,00 1623M810352

Fastening kit for AWH-Connect

A4-70/A4-50
Nuts Price/EUR Article No.
4 /M8 15,00 1613M4082580031
8 /M8 30,00 1623M808252
8 /M10 38,00 1623M810352

Edition 3.0 9
 AWH-Connect DIN 11864-2 Nut Flange and Accessories

Sight Glass-Liner Flange DIN11864-2

max. perm.
DN PN [bar]
D3 L1 L2 LK Pipe-Ø Thread bolts Weight [kg]

40 16 82 14 30 65 41x1,5 4/ M8x30 0,451

50 16 94 16 32 77 53x1,5 4/ M8x32 0,691
65 16 113 16 32 95 70x2,0 8/ M8x32 1,002
80 16 133 20 43 112 85x2,0 8/ M10x43 1,764
100 10 159 24 43 137 104x2,0 8/ M10x43 3,045

2“ 16 92 14 30 75 50,8x1,65 4/ M8x30 0,594

2 1/2“ 16 107 16 32 89 63,5x1,65 8/ M8x32 0,877
3“ 16 125 20 43 104 76,2x1,65 8/ M10x43 1,523
4“ 10 157 24 43 135 101,6x2,11 8/ M10x43 2,881

Sight Glass-Liner Flange for Light DIN11864-2

max. perm.
DN PN [bar]
D3 D4 L1 L2 LK Pipe-Ø Thread bolts Weight [kg]

25 16 70 24,5 14 30 53 29x1,5 4/ M8x30 0,368

32 16 76 24,5 14 30 59 35x1,5 4/ M8x30 0,437

1 1/2“ 16 79 24,5 14 30 62 38,1x1,65 4/ M8x30 0,475

Sight Glass-Liner Flange for Light DIN11864-2

max. perm.
DN PN [bar]
D3 D4 L1 L2 LK Pipe-Ø Thread bolts Weight [kg]

50 16 94 42,5 16,3 32 77 53x1,5 4/ M8x32 0,742

65 16 113 42,5 16 32 95 70x2,0 4/ M8x32 1,092
80 16 133 42,5 20 32 112 85x2,0 8/ M10x43 1,907

2“ 16 92 24,5 14 30 75 50,8x1,65 4/ M8x30 0,706

2 1/2“ 16 107 24,5 18 35 89 63,5x1,65 8/ M8x35 1,082
3“ 16 125 24,5 20 43 104 76,2x1,65 8/ M10x43 1,662

10 Edition 3.0
 AWH-Connect DIN 11864-2 Nut Flange and Accessories

Sight Glass-Liner Flange DIN11864-2

1.4462 Fastening kit
Price/EUR Article No. Price/EUR Article No.
* 162S07004 17,00 1613M4083080031
* 162S08004 18,00 1623M408322
* 162S09004 36,00 1623M808322
* 162S10004 40,00 1623M810432
* 162S12004 40,00 1623M810432

* 162S58004 17,00 1613M4083080031

* 162S59004 36,00 1623M808322
* 162S60004 40,00 1623M808432
* 162S62004 40,00 1623M810452

Sight Glass-Liner Flange for Light DIN11864-2

1.4462 Fastening kit Light
Price/EUR Article No. Price/EUR Article No. Price/EUR Type Article No.
* 162L05004 17,00 1613M4083080031 * ESL 51 602307002
* 162L06004 17,00 1613M4083080031 * ESL 51 602307002

* 162L57004 17,00 1613M4083080031 * ESL 51 602307002

Sight Glass-Liner Flange for Light DIN11864-2

1.4462 Fastening kit Light
Price/EUR Article No. Price/EUR Article No. Price/EUR Type Article No.
* 162L08004 18,00 1623M408322 * USL 33 602309003
* 162L09004 36,00 1623M808322 * USL 33 602309003
* 162L10004 40,00 1623M810432 * USL 33 602309003

* 162L58004 17,00 1613M4083080031 * USL 33 602309003

* 162L59004 36,00 1623M808322 * USL 33 602309003
* 162L60004 40,00 1623M810432 * USL 33 602309003

Edition 3.0 11
 AWH-Connect DIN 11864-2 Nut Flange and Accessories

Sight glass light fitting

Type D1 D2 L1 Article No. Weight [kg]
ESL 51-LED-B 23,5 35 72 602307002 0,36

Sight glass light fitting

Type D1 D2 L1 Article No. Weight [kg]
USL 33-LED-B 43 53 115 602309003 0,73

12 Edition 3.0
 Notes

Schauglasleuchten
1.4462 / Borosilikat
DN DIN DN Zoll Preis/EUR Artikel-Nr.

Schauglasleuchten
1.4462 / Borosilikat
DN DIN DN Zoll Preis/EUR Artikel-Nr.

Edition 3.0 13
 AWH-Connect and Accessories

The AWH-Connect is an aseptic and hygienic connection for tanks. It is designed to comply with the strict
requirements of the pharmaceutical, biotechnological and food industries. Using AWH-Connect in place of
standard clamp connection allows you eliminate or minimize dead space in tanks.

In accordance with the Pressure Equipment Directive, the AWH-Connect have been subjected to a design
examination by TÜV Nord acc. to EN 13445 standard and the AD2000 data sheet. Relevant certificates can
be provided on request.

Technical Parameters

Standard Designed in accordance with the requirements of the Pressure Equipment Directive 2014/68/EU, EN 13445 and AD2000
regulations/ASME VIII Div. 2.

Materials Welded flange: 1.4435, BN2 (Delta ferrite: </= 1.0%) 316 L
DIN EN 10272 ASME-SA 479, ASTM A479

Split ring: 1.4404 316 L

DIN EN 10272 ASME-SA 479, ASTM A479

Thread bolts/cap nuts A4-70 / A4-50 A4-70 / A4-50

In conformity with the
Pressure Equipment
Directive 2014/68/EU: DIN EN ISO 3506-1 / -2 DIN EN ISO 3506-1 / -2

Thread bolts/cap nuts SA193 B8M Cl.1 SA194 8M Cl. 1

In conformity with ASME VIII:

Surfaces Surfaces in contact with

the product: Ra ≤ 0.5 µm
Other surfaces: Ra ≤ 1.2 µm

Operating pressure -1 to +7 bar / -14.5 to 101 psi

Operating -80 to +200 °C / -112 to 392 °F

temperature

Thread bolts / Nuts Thread bolts acc. to DIN 976-1 with 1x slot acc. to DIN 551
Cap nuts acc. to DIN 1587
Manufacturer acc. to AD2000 data sheet (VdTÜV data sheet 1253/4) recognized for designs conforming to PED 2014/68/EU

Clamp connection Suitable for clamp ferrules acc. to DIN 32676, ISO 2852, BS 4825 and ASME BPE

Seals Suitable for standard seals acc. to DIN 32676, as well as ISO 2852 Type A and Type B

Labelling Welded flange and split ring are permanently marked with material, batch no. and manufacturer's trademark

Documentation Acceptance test certificate 3.1 acc. to EN 10204 | AD2000-W2/W10 | ASME SEC. II
Optionally available for welded flange and split ring.

Delivery / Packaging The product is delivered in a disassembled condition.

The welded flange, split ring and thread bolts/nuts are all securely packaged separately.
Returns are only possible if the packaging has not been opened! Seals are not included in the scope of delivery.

Options Customized versions in terms of materials, surfaces, welded flange heights etc. can be supplied on request.
Please get in touch with us!

Notes The operating limits (pressure and temperature) for the AWH-Connect depend on both the seal used and the connected component.
The weakest individual component in the connection determines the max. permissible pressure and the max. temperature.
The compatibility of the components to be connected must be checked in advance.
After installing a component, it is to be ensured that the cap nuts are screwed on tightly before applying pressure to the system.
Weight specifications are approximate weights. We reserve the right to make technical changes.

14 Edition 3.0
 AWH-Connect and Accessories

Configuration example

H
G
F I

E D

A Welded flange F Sight glass flange

B Thread bolts G Blind clamp acc. 32676
C Seal H Clamp acc. 32676
D Split ring I Sight glass
E Cap nut

Services

Welded Flange Measuring Report

Article No. Description Measuring points Net price/EUR
1611MP00RA00300 Surface roughness (inner/outer) 3 35,00
1611MP00RA00500 Surface roughness (inner/outer) 5 55,00
1611MP00FE00200 Delta-Ferrite content (inner) 2 45,00

Material Certificates
Article No. Description Net price/EUR
27u Acceptance test certificate 3.1 incl. marking transfer certificate 15,00

Edition 3.0 15
 AWH-Connect and Accessories

TC
AWH-Connect AD2000 Data Sheet (PED 2014/68/EU) DIN
DN DIN D1 D3 D4 L1 L2 Pipe-Ø Thread bolts TC Weight [kg]
D4

10 10 70 28.8 12 5 13 x 1.5 4/M8 x 20 34 0.5

L2 10 10 70 28.8 25 5 13 x 1.5 4/M8 x 20 34 0.7
L1 10 10 70 28.8 38 5 13 x 1.5 4/M8 x 20 34 0.9
10 10 70 28.8 51 5 13 x 1.5 4/M8 x 20 34 1.2

D1 15 16 70 28.8 12 5 19 x 1.5 4/M8 x 20 34 0.5

15 16 70 28.8 25 5 19 x 1.5 4/M8 x 20 34 0.7
D3 15 16 70 28.8 38 5 19 x 1.5 4/M8 x 20 34 0.9
15 16 70 28.8 51 5 19 x 1.5 4/M8 x 20 34 1.1
Pipe standard:
DIN 11866 Series A (DIN EN 10357, Series A) 20 20 70 28.8 12 5 23 x 1.5 4/M8 x 20 34 0.4
20 20 70 28.8 25 5 23 x 1.5 4/M8 x 20 34 0.6
20 20 70 28.8 38 5 23 x 1.5 4/M8 x 20 34 0.9
20 20 70 28.8 51 5 23 x 1.5 4/M8 x 20 34 1.1

25 26 85 43.8 12 5 29 x 1.5 4/M8 x 20 50.5 0.6

25 26 85 43.8 25 5 29 x 1.5 4/M8 x 20 50.5 0.9
25 26 85 43.8 38 5 29 x 1.5 4/M8 x 20 50.5 1.2
25 26 85 43.8 51 5 29 x 1.5 4/M8 x 20 50.5 1.5

32 32 85 43.8 12 5 35 x 1.5 4/M8 x 20 50.5 0.6

32 32 85 43.8 25 5 35 x 1.5 4/M8 x 20 50.5 0.8
32 32 85 43.8 38 5 35 x 1.5 4/M8 x 20 50.5 1.0
32 32 85 43.8 51 5 35 x 1.5 4/M8 x 20 50.5 1.3

40 38 85 43.8 12 5 41 x 1.5 4/M8 x 20 50.5 0.5

40 38 85 43.8 25 5 41 x 1.5 4/M8 x 20 50.5 0.8
40 38 85 43.8 38 5 41 x 1.5 4/M8 x 20 50.5 1.0
40 38 85 43.8 51 5 41 x 1.5 4/M8 x 20 50.5 1.4

50 50 100 55 15 6 53 x 1.5 4/M8 x 20 64 0.8

50 50 100 55 25 6 53 x 1.5 4/M8 x 20 64 1.1
50 50 100 55 38 6 53 x 1.5 4/M8 x 20 64 1.4
50 50 100 55 51 6 53 x 1.5 4/M8 x 20 64 1.7

65 66 131 77 15 10 70 x 2.0 6/M8 x 25 91 1.5

65 66 131 77 25 10 70 x 2.0 6/M8 x 25 91 1.9
65 66 131 77 38 10 70 x 2.0 6/M8 x 25 91 2.4
65 66 131 77 51 10 70 x 2.0 6/M8 x 25 91 3.0

80 81 146 93.5 15 10 85 x 2.0 6/M8 x 25 106 1.7

80 81 146 93.5 25 10 85 x 2.0 6/M8 x 25 106 2.2
80 81 146 93.5 38 10 85 x 2.0 6/M8 x 25 106 2.8
80 81 146 93.5 51 10 85 x 2.0 6/M8 x 25 106 3.4

100 100 170 105 15 12 104 x 2.0 8/M8 x 30 119 2.5

100 100 170 105 25 12 104 x 2.0 8/M8 x 30 119 3.0
100 100 170 105 38 12 104 x 2.0 8/M8 x 30 119 3.8
100 100 170 105 51 12 104 x 2.0 8/M8 x 30 119 4.7

16 Edition 3.0
 AWH-Connect and Accessories

AWH-Connect AD2000 Data Sheet (PED 2014/68/EU) DIN

Complete 1.4435/1.4404 (316L) Split ring 1.4404 (316L) Fastening kit
DN DIN Price/EUR Article No. Price/EUR Article No. Price/EUR Article No.
10 101,00 161 0 D010 12 142 11 32,00 161 2 G034 05 022 11 14,00 161 3 M408 20 800 31
10 111,00 161 0 D010 25 142 11 32,00 161 2 G034 05 022 11 14,00 161 3 M408 20 800 31
10 116,00 161 0 D010 38 142 11 32,00 161 2 G034 05 022 11 14,00 161 3 M408 20 800 31
10 123,00 161 0 D010 51 142 11 32,00 161 2 G034 05 022 11 14,00 161 3 M408 20 800 31

15 101,00 161 0 D015 12 142 11 32,00 161 2 G034 05 022 11 14,00 161 3 M408 20 800 31
15 111,00 161 0 D015 25 142 11 32,00 161 2 G034 05 022 11 14,00 161 3 M408 20 800 31
15 116,00 161 0 D015 38 142 11 32,00 161 2 G034 05 022 11 14,00 161 3 M408 20 800 31
15 123,00 161 0 D015 51 142 11 32,00 161 2 G034 05 022 11 14,00 161 3 M408 20 800 31

20 101,00 161 0 D020 12 142 11 32,00 161 2 G034 05 022 11 14,00 161 3 M408 20 800 31
20 111,00 161 0 D020 25 142 11 32,00 161 2 G034 05 022 11 14,00 161 3 M408 20 800 31
20 116,00 161 0 D020 38 142 11 32,00 161 2 G034 05 022 11 14,00 161 3 M408 20 800 31
20 123,00 161 0 D020 51 142 11 32,00 161 2 G034 05 022 11 14,00 161 3 M408 20 800 31

25 119,00 161 0 D025 12 142 11 35,00 161 2 G050 05 022 11 14,00 161 3 M408 20 800 31
25 127,00 161 0 D025 25 142 11 35,00 161 2 G050 05 022 11 14,00 161 3 M408 20 800 31
25 143,00 161 0 D025 38 142 11 35,00 161 2 G050 05 022 11 14,00 161 3 M408 20 800 31
25 162,00 161 0 D025 51 142 11 35,00 161 2 G050 05 022 11 14,00 161 3 M408 20 800 31

32 119,00 161 0 D032 12 142 11 35,00 161 2 G050 05 022 11 14,00 161 3 M408 20 800 31
32 127,00 161 0 D032 25 142 11 35,00 161 2 G050 05 022 11 14,00 161 3 M408 20 800 31
32 143,00 161 0 D032 38 142 11 35,00 161 2 G050 05 022 11 14,00 161 3 M408 20 800 31
32 162,00 161 0 D032 51 142 11 35,00 161 2 G050 05 022 11 14,00 161 3 M408 20 800 31

40 119,00 161 0 D040 12 142 11 35,00 161 2 G050 05 022 11 14,00 161 3 M408 20 800 31
40 127,00 161 0 D040 25 142 11 35,00 161 2 G050 05 022 11 14,00 161 3 M408 20 800 31
40 143,00 161 0 D040 38 142 11 35,00 161 2 G050 05 022 11 14,00 161 3 M408 20 800 31
40 162,00 161 0 D040 51 142 11 35,00 161 2 G050 05 022 11 14,00 161 3 M408 20 800 31

50 145,00 161 0 D050 15 142 11 44,00 161 2 G064 06 022 11 14,00 161 3 M408 20 800 31
50 151,00 161 0 D050 25 142 11 44,00 161 2 G064 06 022 11 14,00 161 3 M408 20 800 31
50 171,00 161 0 D050 38 142 11 44,00 161 2 G064 06 022 11 14,00 161 3 M408 20 800 31
50 188,00 161 0 D050 51 142 11 44,00 161 2 G064 06 022 11 14,00 161 3 M408 20 800 31

65 220,00 161 0 D065 15 142 11 101,00 161 2 G091 10 022 11 23,00 161 3 M608 25 800 31
65 224,00 161 0 D065 25 142 11 101,00 161 2 G091 10 022 11 23,00 161 3 M608 25 800 31
65 247,00 161 0 D065 38 142 11 101,00 161 2 G091 10 022 11 23,00 161 3 M608 25 800 31
65 264,00 161 0 D065 51 142 11 101,00 161 2 G091 10 022 11 23,00 161 3 M608 25 800 31

80 289,00 161 0 D080 15 142 11 120,00 161 2 G106 10 022 11 23,00 161 3 M608 25 800 31
80 315,00 161 0 D080 25 142 11 120,00 161 2 G106 10 022 11 23,00 161 3 M608 25 800 31
80 362,00 161 0 D080 38 142 11 120,00 161 2 G106 10 022 11 23,00 161 3 M608 25 800 31
80 405,00 161 0 D080 51 142 11 120,00 161 2 G106 10 022 11 23,00 161 3 M608 25 800 31

100 398,00 161 0 D100 15 142 11 181,00 161 2 G119 12 022 11 33,00 161 3 M808 30 800 31
100 459,00 161 0 D100 25 142 11 181,00 161 2 G119 12 022 11 33,00 161 3 M808 30 800 31
100 499,00 161 0 D100 38 142 11 181,00 161 2 G119 12 022 11 33,00 161 3 M808 30 800 31
100 515,00 161 0 D100 51 142 11 181,00 161 2 G119 12 022 11 33,00 161 3 M808 30 800 31

Edition 3.0 17
 AWH-Connect and Accessories

TC
AWH-Connect AD2000 Data Sheet (PED 2014/68/EU) ISO
DN ISO D1 D3 D4 L1 L2 Pipe-Ø Thread bolts TC Weight [kg]
D4

13.5 10.3 55 20 12 5 13.5 x 1.6 4/M6 x 16 25 0.3

L2 13.5 10.3 55 20 25 5 13.5 x 1.6 4/M6 x 16 25 0.4
L1 13.5 10.3 55 20 38 5 13.5 x 1.6 4/M6 x 16 25 0.5
13.5 10.3 55 20 51 5 13.5 x 1.6 4/M6 x 16 25 0.7

D1 17.2 14 70 28.8 12 5 17.2 x 1.6 4/M8 x 20 34 0.5

17.2 14 70 28.8 25 5 17.2 x 1.6 4/M8 x 20 34 0.7
D3 17.2 14 70 28.8 38 5 17.2 x 1.6 4/M8 x 20 34 0.9
17.2 14 70 28.8 51 5 17.2 x 1.6 4/M8 x 20 34 1.1
Pipe standard:
DIN 11866 Series B (DIN EN ISO 1127) 21.3 18.1 70 28.8 12 5 21.3 x 1.6 4/M8 x 20 34 0.5
21.3 18.1 70 28.8 25 5 21.3 x 1.6 4/M8 x 20 34 0.7
21.3 18.1 70 28.8 38 5 21.3 x 1.6 4/M8 x 20 34 0.9
21.3 18.1 70 28.8 51 5 21.3 x 1.6 4/M8 x 20 34 1.1

26.9 23.7 85 43.8 12 5 26.9 x 1.6 4/M8 x 20 50.5 0.6

26.9 23.7 85 43.8 25 5 26.9 x 1.6 4/M8 x 20 50.5 0.9
26.9 23.7 85 43.8 38 5 26.9 x 1.6 4/M8 x 20 50.5 1.2
26.9 23.7 85 43.8 51 5 26.9 x 1.6 4/M8 x 20 50.5 1.5

33.7 29.7 85 43.8 12 5 33.7 x 2.0 4/M8 x 20 50.5 0.6

33.7 29.7 85 43.8 25 5 33.7 x 2.0 4/M8 x 20 50.5 0.8
33.7 29.7 85 43.8 38 5 33.7 x 2.0 4/M8 x 20 50.5 1.1
33.7 29.7 85 43.8 51 5 33.7 x 2.0 4/M8 x 20 50.5 1.4

42.4 38.4 100 55 15 6 42.4 x 2.0 4/M8 x 20 64 0.9

42.4 38.4 100 55 25 6 42.4 x 2.0 4/M8 x 20 64 1.1
42.4 38.4 100 55 38 6 42.4 x 2.0 4/M8 x 20 64 1.5
42.4 38.4 100 55 51 6 42.4 x 2.0 4/M8 x 20 64 1.9

48.3 44.3 100 55 15 6 48.3 x 2.0 4/M8 x 20 64 0.8

48.3 44.3 100 55 25 6 48.3 x 2.0 4/M8 x 20 64 1.1
48.3 44.3 100 55 38 6 48.3 x 2.0 4/M8 x 20 64 1.4
48.3 44.3 100 55 51 6 48.3 x 2.0 4/M8 x 20 64 1.8

60.3 56.3 112 65.5 15 9.5 60.3 x 2.0 4/M8 x 25 77.5 1.1
60.3 56.3 112 65.5 25 9.5 60.3 x 2.0 4/M8 x 25 77.5 1.4
60.3 56.3 112 65.5 38 9.5 60.3 x 2.0 4/M8 x 25 77.5 1.8
60.3 56.3 112 65.5 51 9.5 60.3 x 2.0 4/M8 x 25 77.5 2.3

76.1 72.1 131 77 15 10 76.1 x 2.0 6/M8 x 25 91 1.5

76.1 72.1 131 77 25 10 76.1 x 2.0 6/M8 x 25 91 1.8
76.1 72.1 131 77 38 10 76.1 x 2.0 6/M8 x 25 91 2.3
76.1 72.1 131 77 51 10 76.1 x 2.0 6/M8 x 25 91 2.9

88.9 84.3 146 93.5 15 10 88.9 x 2.3 6/M8 x 25 106 1.7

88.9 84.3 146 93.5 25 10 88.9 x 2.3 6/M8 x 25 106 2.1
88.9 84.3 146 93.5 38 10 88.9 x 2.3 6/M8 x 25 106 2.7
88.9 84.3 146 93.5 51 10 88.9 x 2.3 6/M8 x 25 106 3.4

114.3 109.7 170 115 15 12 114.3 x 2.3 8/M8 x 30 130 2.1

114.3 109.7 170 115 25 12 114.3 x 2.3 8/M8 x 30 130 2.6
114.3 109.7 170 115 38 12 114.3 x 2.3 8/M8 x 30 130 3.2
114.3 109.7 170 115 51 12 114.3 x 2.3 8/M8 x 30 130 4.0

18 Edition 3.0
 AWH-Connect and Accessories

AWH-Connect AD2000 Data Sheet (PED 2014/68/EU) ISO

Complete 1.4435/1.4404 (316L) Split ring 1.4404 (316L) Fastening kit
DN ISO Price/EUR Article No. Price/EUR Article No. Price/EUR Article No.
13.5 96,00 161 0 I013 12 142 11 33,00 161 2 G025 05 022 11 16,00 161 3 M406 16 800 31
13.5 99,00 161 0 I013 25 142 11 33,00 161 2 G025 05 022 11 16,00 161 3 M406 16 800 31
13.5 106,00 161 0 I013 38 142 11 33,00 161 2 G025 05 022 11 16,00 161 3 M406 16 800 31
13.5 111,00 161 0 I013 51 142 11 33,00 161 2 G025 05 022 11 16,00 161 3 M406 16 800 31

17.2 101,00 161 0 I017 12 142 11 32,00 161 2 G034 05 022 11 14,00 161 3 M408 20 800 31
17.2 111,00 161 0 I017 25 142 11 32,00 161 2 G034 05 022 11 14,00 161 3 M408 20 800 31
17.2 116,00 161 0 I017 38 142 11 32,00 161 2 G034 05 022 11 14,00 161 3 M408 20 800 31
17.2 123,00 161 0 I017 51 142 11 32,00 161 2 G034 05 022 11 14,00 161 3 M408 20 800 31

21.3 101,00 161 0 I021 12 142 11 32,00 161 2 G034 05 022 11 14,00 161 3 M408 20 800 31
21.3 111,00 161 0 I021 25 142 11 32,00 161 2 G034 05 022 11 14,00 161 3 M408 20 800 31
21.3 116,00 161 0 I021 38 142 11 32,00 161 2 G034 05 022 11 14,00 161 3 M408 20 800 31
21.3 123,00 161 0 I021 51 142 11 32,00 161 2 G034 05 022 11 14,00 161 3 M408 20 800 31

26.9 119,00 161 0 I026 12 142 11 35,00 161 2 G050 05 022 11 14,00 161 3 M408 20 800 31
26.9 127,00 161 0 I026 25 142 11 35,00 161 2 G050 05 022 11 14,00 161 3 M408 20 800 31
26.9 143,00 161 0 I026 38 142 11 35,00 161 2 G050 05 022 11 14,00 161 3 M408 20 800 31
26.9 162,00 161 0 I026 51 142 11 35,00 161 2 G050 05 022 11 14,00 161 3 M408 20 800 31

33.7 119,00 161 0 I033 12 142 11 35,00 161 2 G050 05 022 11 14,00 161 3 M408 20 800 31
33.7 127,00 161 0 I033 25 142 11 35,00 161 2 G050 05 022 11 14,00 161 3 M408 20 800 31
33.7 143,00 161 0 I033 38 142 11 35,00 161 2 G050 05 022 11 14,00 161 3 M408 20 800 31
33.7 162,00 161 0 I033 51 142 11 35,00 161 2 G050 05 022 11 14,00 161 3 M408 20 800 31

42.4 145,00 161 0 I042 15 142 11 44,00 161 2 G064 05 022 11 14,00 161 3 M408 20 800 31
42.4 151,00 161 0 I042 25 142 11 44,00 161 2 G064 05 022 11 14,00 161 3 M408 20 800 31
42.4 171,00 161 0 I042 38 142 11 44,00 161 2 G064 05 022 11 14,00 161 3 M408 20 800 31
42.4 188,00 161 0 I042 51 142 11 44,00 161 2 G064 05 022 11 14,00 161 3 M408 20 800 31

48.3 145,00 161 0 I048 15 142 11 44,00 161 2 G064 06 022 11 14,00 161 3 M408 20 800 31
48.3 151,00 161 0 I048 25 142 11 44,00 161 2 G064 06 022 11 14,00 161 3 M408 20 800 31
48.3 171,00 161 0 I048 38 142 11 44,00 161 2 G064 06 022 11 14,00 161 3 M408 20 800 31
48.3 188,00 161 0 I048 51 142 11 44,00 161 2 G064 06 022 11 14,00 161 3 M408 20 800 31

60.3 159,00 161 0 I060 15 142 11 57,00 161 2 G077 09 022 11 15,00 161 3 M408 25 800 31
60.3 172,00 161 0 I060 25 142 11 57,00 161 2 G077 09 022 11 15,00 161 3 M408 25 800 31
60.3 190,00 161 0 I060 38 142 11 57,00 161 2 G077 09 022 11 15,00 161 3 M408 25 800 31
60.3 208,00 161 0 I060 51 142 11 57,00 161 2 G077 09 022 11 15,00 161 3 M408 25 800 31

76.1 220,00 161 0 I076 15 142 11 101,00 161 2 G091 10 022 11 23,00 161 3 M608 25 800 31
76.1 224,00 161 0 I076 25 142 11 101,00 161 2 G091 10 022 11 23,00 161 3 M608 25 800 31
76.1 247,00 161 0 I076 38 142 11 101,00 161 2 G091 10 022 11 23,00 161 3 M608 25 800 31
76.1 264,00 161 0 I076 51 142 11 101,00 161 2 G091 10 022 11 23,00 161 3 M608 25 800 31

88.9 289,00 161 0 I088 15 142 11 120,00 161 2 G106 12 022 11 23,00 161 3 M608 25 800 31
88.9 315,00 161 0 I088 25 142 11 120,00 161 2 G106 12 022 11 23,00 161 3 M608 25 800 31
88.9 362,00 161 0 I088 38 142 11 120,00 161 2 G106 12 022 11 23,00 161 3 M608 25 800 31
88.9 405,00 161 0 I088 51 142 11 120,00 161 2 G106 12 022 11 23,00 161 3 M608 25 800 31

114.3 401,00 161 0 I114 15 142 11 182,00 161 2 G130 12 022 11 33,00 161 3 M808 30 800 31
114.3 444,00 161 0 I114 25 142 11 182,00 161 2 G130 12 022 11 33,00 161 3 M808 30 800 31
114.3 500,00 161 0 I114 38 142 11 182,00 161 2 G130 12 022 11 33,00 161 3 M808 30 800 31
114.3 556,00 161 0 I114 51 142 11 182,00 161 2 G130 12 022 11 33,00 161 3 M808 30 800 31

Edition 3.0 19
 AWH-Connect and Accessories

TC
AWH-Connect AD2000 Data Sheet (PED 2014/68/EU) Inch (Tube OD)
DN Inch D1 D3 D4 L1 L2 Pipe-Ø Thread bolts TC Weight [kg]
D4

1/2" 9.4 55 20 12 5 12.7 x 1.65 4/M6 x 16 25 0.3

L2 1/2" 9.4 55 20 25 5 12.7 x 1.65 4/M6 x 16 25 0.4
L1 1/2" 9.4 55 20 38 5 12.7 x 1.65 4/M6 x 16 25 0.6
1/2" 9.4 55 20 51 5 12.7 x 1.65 4/M6 x 16 25 0.7

D1 3/4" 15.8 55 20 12 5 19.05 x 1.65 4/M6 x 16 25 0.2

3/4" 15.8 55 20 25 5 19.05 x 1.65 4/M6 x 16 25 0.4
D3 3/4" 15.8 55 20 38 5 19.05 x 1.65 4/M6 x 16 25 0.5
3/4" 15.8 55 20 51 5 19.05 x 1.65 4/M6 x 16 25 0.6
Pipe standard:
DIN 11866 Series C (ASME-BPE) 1" 22.1 85 43.8 12 5 25.4 x 1.65 4/M8 x 20 50.5 0.6
1" 22.1 85 43.8 25 5 25.4 x 1.65 4/M8 x 20 50.5 0.9
1" 22.1 85 43.8 38 5 25.4 x 1.65 4/M8 x 20 50.5 1.2
1" 22.1 85 43.8 51 5 25.4 x 1.65 4/M8 x 20 50.5 1.5

1 1/2" 34.8 85 43.8 12 5 38.1 x 1.65 4/M8 x 20 50.5 0.6

1 1/2" 34.8 85 43.8 25 5 38.1 x 1.65 4/M8 x 20 50.5 0.8
1 1/2" 34.8 85 43.8 38 5 38.1 x 1.65 4/M8 x 20 50.5 1.1
1 1/2" 34.8 85 43.8 51 5 38.1 x 1.65 4/M8 x 20 50.5 1.4

2" 47.5 100 55 15 6 50.8 x 1.65 4/M8 x 20 64 0.8

2" 47.5 100 55 25 6 50.8 x 1.65 4/M8 x 20 64 1.1
2" 47.5 100 55 38 6 50.8 x 1.65 4/M8 x 20 64 1.4
2" 47.5 100 55 51 6 50.8 x 1.65 4/M8 x 20 64 1.8

2 1/2" 60.2 112 65.5 15 9.5 63.5 x 1.65 4/M8 x 25 77.5 1.1
2 1/2" 60.2 112 65.5 25 9.5 63.5 x 1.65 4/M8 x 25 77.5 1.4
2 1/2" 60.2 112 65.5 38 9.5 63.5 x 1.65 4/M8 x 25 77.5 1.8
2 1/2" 60.2 112 65.5 51 9.5 63.5 x 1.65 4/M8 x 25 77.5 2.2

3" 72.9 131 77 15 10 76.2 x 1.65 6/M8 x 25 91 1.5

3" 72.9 131 77 25 10 76.2 x 1.65 6/M8 x 25 91 1.8
3" 72.9 131 77 38 10 76.2 x 1.65 6/M8 x 25 91 2.3
3" 72.9 131 77 51 10 76.2 x 1.65 6/M8 x 25 91 2.9

4" 97.4 170 105 15 12 101.6 x 2.11 8/M8 x 30 119 2.5

4" 97.4 170 105 25 12 101.6 x 2.11 8/M8 x 30 119 3.1
4" 97.4 170 105 38 12 101.6 x 2.11 8/M8 x 30 119 3.9
4" 97.4 170 105 51 12 101.6 x 2.11 8/M8 x 30 119 4.8

20 Edition 3.0
 AWH-Connect and Accessories

AWH-Connect AD2000 Data Sheet (PED 2014/68/EU) Inch (Tube OD)

Complete 1.4435/1.4404 (316L) Split ring 1.4404 (316L) Fastening kit
DN Inch Price/EUR Article No. Price/EUR Article No. Price/EUR Article No.
1/2" 96,00 161 0 A050 12 142 11 33,00 161 2 G025 05 022 11 16,00 161 3 M406 16 800 31
1/2" 99,00 161 0 A050 25 142 11 33,00 161 2 G025 05 022 11 16,00 161 3 M406 16 800 31
1/2" 106,00 161 0 A050 38 142 11 33,00 161 2 G025 05 022 11 16,00 161 3 M406 16 800 31
1/2" 111,00 161 0 A050 51 142 11 33,00 161 2 G025 05 022 11 16,00 161 3 M406 16 800 31

3/4" 96,00 161 0 A075 12 142 11 33,00 161 2 G025 05 022 11 16,00 161 3 M406 16 800 31
3/4" 99,00 161 0 A075 25 142 11 33,00 161 2 G025 05 022 11 16,00 161 3 M406 16 800 31
3/4" 106,00 161 0 A075 38 142 11 33,00 161 2 G025 05 022 11 16,00 161 3 M406 16 800 31
3/4" 111,00 161 0 A075 51 142 11 33,00 161 2 G025 05 022 11 16,00 161 3 M406 16 800 31

1" 119,00 161 0 A100 12 142 11 35,00 161 2 G050 05 022 11 14,00 161 3 M408 20 800 31
1" 127,00 161 0 A100 25 142 11 35,00 161 2 G050 05 022 11 14,00 161 3 M408 20 800 31
1" 143,00 161 0 A100 38 142 11 35,00 161 2 G050 05 022 11 14,00 161 3 M408 20 800 31
1" 162,00 161 0 A100 51 142 11 35,00 161 2 G050 05 022 11 14,00 161 3 M408 20 800 31

1 1/2" 119,00 161 0 A150 12 142 11 35,00 161 2 G050 05 022 11 14,00 161 3 M408 20 800 31
1 1/2" 127,00 161 0 A150 25 142 11 35,00 161 2 G050 05 022 11 14,00 161 3 M408 20 800 31
1 1/2" 143,00 161 0 A150 38 142 11 35,00 161 2 G050 05 022 11 14,00 161 3 M408 20 800 31
1 1/2" 162,00 161 0 A150 51 142 11 35,00 161 2 G050 05 022 11 14,00 161 3 M408 20 800 31

2" 145,00 161 0 A200 15 142 11 44,00 161 2 G064 06 022 11 14,00 161 3 M408 20 800 31
2" 151,00 161 0 A200 25 142 11 44,00 161 2 G064 06 022 11 14,00 161 3 M408 20 800 31
2" 171,00 161 0 A200 38 142 11 44,00 161 2 G064 06 022 11 14,00 161 3 M408 20 800 31
2" 188,00 161 0 A200 51 142 11 44,00 161 2 G064 06 022 11 14,00 161 3 M408 20 800 31

2 1/2" 159,00 161 0 A250 15 142 11 57,00 161 2 G077 09 022 11 15,00 161 3 M408 25 800 31
2 1/2" 172,00 161 0 A250 25 142 11 57,00 161 2 G077 09 022 11 15,00 161 3 M408 25 800 31
2 1/2" 190,00 161 0 A250 38 142 11 57,00 161 2 G077 09 022 11 15,00 161 3 M408 25 800 31
2 1/2" 208,00 161 0 A250 51 142 11 57,00 161 2 G077 09 022 11 15,00 161 3 M408 25 800 31

3" 220,00 161 0 A300 15 142 11 101,00 161 2 G091 10 022 11 23,00 161 3 M608 25 800 31
3" 224,00 161 0 A300 25 142 11 101,00 161 2 G091 10 022 11 23,00 161 3 M608 25 800 31
3" 247,00 161 0 A300 38 142 11 101,00 161 2 G091 10 022 11 23,00 161 3 M608 25 800 31
3" 264,00 161 0 A300 51 142 11 101,00 161 2 G091 10 022 11 23,00 161 3 M608 25 800 31

4" 398,00 161 0 A400 15 142 11 181,00 161 2 G119 12 022 11 33,00 161 3 M808 30 800 31
4" 459,00 161 0 A400 25 142 11 181,00 161 2 G119 12 022 11 33,00 161 3 M808 30 800 31
4" 499,00 161 0 A400 38 142 11 181,00 161 2 G119 12 022 11 33,00 161 3 M808 30 800 31
4" 515,00 161 0 A400 51 142 11 181,00 161 2 G119 12 022 11 33,00 161 3 M808 30 800 31

Edition 3.0 21
 AWH-Connect and Accessories

TC
AWH-Connect AD2000 Data Sheet (PED 2014/68/EU) SMS
DN SMS D1 D3 D4 L1 L2 Pipe-Ø Thread bolts TC Weight [kg]
D4

12 10 55 20 12 5 12 x 1 4/M6 x 16 25 0.3
L2 12 10 55 20 25 5 12 x 1 4/M6 x 16 25 0.4
L1 12 10 55 20 38 5 12 x 1 4/M6 x 16 25 0.5
12 10 55 20 51 5 12 x 1 4/M6 x 16 25 0.7

D1 18 15 55 20 12 5 18 X 1 4/M6 x 16 25 0.3
18 15 55 20 25 5 18 X 1 4/M6 x 16 25 0.4
D3 18 15 55 20 38 5 18 X 1 4/M6 x 16 25 0.5
18 15 55 20 51 5 18 X 1 4/M6 x 16 25 0.7
Pipe standard:
SMS 3008 25 22.6 85 43.8 12 5 25 x 1.2 4/M8 x 20 50.5 0.6
25 22.6 85 43.8 25 5 25 x 1.2 4/M8 x 20 50.5 0.9
25 22.6 85 43.8 38 5 25 x 1.2 4/M8 x 20 50.5 1.2
25 22.6 85 43.8 51 5 25 x 1.2 4/M8 x 20 50.5 1.5

38 35.6 85 43.8 12 5 38 x 1.2 4/M8 x 20 50.5 0.6

38 35.6 85 43.8 25 5 38 x 1.2 4/M8 x 20 50.5 0.8
38 35.6 85 43.8 38 5 38 x 1.2 4/M8 x 20 50.5 1.1
38 35.6 85 43.8 51 5 38 x 1.2 4/M8 x 20 50.5 1.4

51 48.6 100 55 15 6 51 x 1.2 4/M8 x 20 64 0.8

51 48.6 100 55 25 6 51 x 1.2 4/M8 x 20 64 1.1
51 48.6 100 55 38 6 51 x 1.2 4/M8 x 20 64 1.4
51 48.6 100 55 51 6 51 x 1.2 4/M8 x 20 64 1.8

63 60.3 112 65.5 15 9.5 63.5 x 1.6 4/M8 x 25 77.5 1.1

63 60.3 112 65.5 25 9.5 63.5 x 1.6 4/M8 x 25 77.5 1.4
63 60.3 112 65.5 38 9.5 63.5 x 1.6 4/M8 x 25 77.5 1.8
63 60.3 112 65.5 51 9.5 63.5 x 1.6 4/M8 x 25 77.5 2.2

76 72.9 131 77 15 10 76.1 x 1.6 6/M8 x 25 91 1.4

76 72.9 131 77 25 10 76.1 x 1.6 6/M8 x 25 91 1.8
76 72.9 131 77 38 10 76.1 x 1.6 6/M8 x 25 91 2.3
76 72.9 131 77 51 10 76.1 x 1.6 6/M8 x 25 91 2.8

102 97.6 170 105 15 12 101.6 x 2 8/M8 x 30 119 2.5

102 97.6 170 105 25 12 101.6 x 2 8/M8 x 30 119 3.2
102 97.6 170 105 38 12 101.6 x 2 8/M8 x 30 119 3.9
102 97.6 170 105 51 12 101.6 x 2 8/M8 x 30 119 4.8

22 Edition 3.0
 AWH-Connect and Accessories

AWH-Connect AD2000 Data Sheet (PED 2014/68/EU) SMS

Complete 1.4435/1.4404 (316L) Split ring 1.4404 (316L) Fastening kit
DN SMS Price/EUR Article No. Price/EUR Article No. Price/EUR Article No.
12 96,00 161 0 S012 12 142 11 33,00 161 2 G025 05 022 11 16,00 161 3 M406 16 800 31
12 99,00 161 0 S012 25 142 11 33,00 161 2 G025 05 022 11 16,00 161 3 M406 16 800 31
12 106,00 161 0 S012 38 142 11 33,00 161 2 G025 05 022 11 16,00 161 3 M406 16 800 31
12 111,00 161 0 S012 51 142 11 33,00 161 2 G025 05 022 11 16,00 161 3 M406 16 800 31

18 96,00 161 0 S018 12 142 11 33,00 161 2 G025 05 022 11 16,00 161 3 M406 16 800 31
18 99,00 161 0 S018 25 142 11 33,00 161 2 G025 05 022 11 16,00 161 3 M406 16 800 31
18 106,00 161 0 S018 38 142 11 33,00 161 2 G025 05 022 11 16,00 161 3 M406 16 800 31
18 111,00 161 0 S018 51 142 11 33,00 161 2 G025 05 022 11 16,00 161 3 M406 16 800 31

25 119,00 161 0 S025 12 142 11 35,00 161 2 G050 05 022 11 14,00 161 3 M408 20 800 31
25 127,00 161 0 S025 25 142 11 35,00 161 2 G050 05 022 11 14,00 161 3 M408 20 800 31
25 143,00 161 0 S025 38 142 11 35,00 161 2 G050 05 022 11 14,00 161 3 M408 20 800 31
25 162,00 161 0 S025 51 142 11 35,00 161 2 G050 05 022 11 14,00 161 3 M408 20 800 31

38 119,00 161 0 S038 12 142 11 35,00 161 2 G050 05 022 11 14,00 161 3 M408 20 800 31
38 127,00 161 0 S038 25 142 11 35,00 161 2 G050 05 022 11 14,00 161 3 M408 20 800 31
38 143,00 161 0 S038 38 142 11 35,00 161 2 G050 05 022 11 14,00 161 3 M408 20 800 31
38 162,00 161 0 S038 51 142 11 35,00 161 2 G050 05 022 11 14,00 161 3 M408 20 800 31

51 145,00 161 0 S051 15 142 11 44,00 161 2 G064 06 022 11 14,00 161 3 M408 20 800 31
51 151,00 161 0 S051 25 142 11 44,00 161 2 G064 06 022 11 14,00 161 3 M408 20 800 31
51 171,00 161 0 S051 38 142 11 44,00 161 2 G064 06 022 11 14,00 161 3 M408 20 800 31
51 188,00 161 0 S051 51 142 11 44,00 161 2 G064 06 022 11 14,00 161 3 M408 20 800 31

63 159,00 161 0 S063 15 142 11 57,00 161 2 G077 09 022 11 15,00 161 3 M408 25 800 31
63 172,00 161 0 S063 25 142 11 57,00 161 2 G077 09 022 11 15,00 161 3 M408 25 800 31
63 190,00 161 0 S063 38 142 11 57,00 161 2 G077 09 022 11 15,00 161 3 M408 25 800 31
63 208,00 161 0 S063 51 142 11 57,00 161 2 G077 09 022 11 15,00 161 3 M408 25 800 31

76 220,00 161 0 S076 15 142 11 101,00 161 2 G091 10 022 11 23,00 161 3 M608 25 800 31
76 224,00 161 0 S076 25 142 11 101,00 161 2 G091 10 022 11 23,00 161 3 M608 25 800 31
76 247,00 161 0 S076 38 142 11 101,00 161 2 G091 10 022 11 23,00 161 3 M608 25 800 31
76 264,00 161 0 S076 51 142 11 101,00 161 2 G091 10 022 11 23,00 161 3 M608 25 800 31

102 398,00 161 0 S102 15 142 11 181,00 161 2 G119 12 022 11 33,00 161 3 M808 30 800 31
102 459,00 161 0 S102 25 142 11 181,00 161 2 G119 12 022 11 33,00 161 3 M808 30 800 31
102 499,00 161 0 S102 38 142 11 181,00 161 2 G119 12 022 11 33,00 161 3 M808 30 800 31
102 515,00 161 0 S102 51 142 11 181,00 161 2 G119 12 022 11 33,00 161 3 M808 30 800 31

Edition 3.0 23
 AWH-Connect and Accessories

TC
AWH-Connect with metric Thread Bolts EN 13445 (PED 2014/68/EU) DIN
DN DIN D1 D3 D4 L1 L2 Pipe-Ø Thread bolts TC Weight [kg]
D4

10 10 70 28.8 12 11 13 x 1.5 4/M8 x 25 34 0.6

L2 10 10 70 28.8 25 11 13 x 1.5 4/M8 x 25 34 0.8
L1 10 10 70 28.8 38 11 13 x 1.5 4/M8 x 25 34 1.0
10 10 70 28.8 51 11 13 x 1.5 4/M8 x 25 34 1.3

D1 15 16 70 28.8 12 11 19 x 1.5 4/M8 x 25 34 0.6

15 16 70 28.8 25 11 19 x 1.5 4/M8 x 25 34 0.8
D3 15 16 70 28.8 38 11 19 x 1.5 4/M8 x 25 34 1.0
15 16 70 28.8 51 11 19 x 1.5 4/M8 x 25 34 1.2
Pipe standard:
DIN 11866 Series A (DIN EN 10357, Series A) 20 20 70 28.8 12 11 23 x 1.5 4/M8 x 25 34 0.5
20 20 70 28.8 25 11 23 x 1.5 4/M8 x 25 34 0.7
20 20 70 28.8 38 11 23 x 1.5 4/M8 x 25 34 1.0
20 20 70 28.8 51 11 23 x 1.5 4/M8 x 25 34 1.2

25 26 85 43.8 12 11 29 x 1.5 4/M8 x 25 50.5 0.8

25 26 85 43.8 25 11 29 x 1.5 4/M8 x 25 50.5 1.1
25 26 85 43.8 38 11 29 x 1.5 4/M8 x 25 50.5 1.4
25 26 85 43.8 51 11 29 x 1.5 4/M8 x 25 50.5 1.7

32 32 85 43.8 12 11 35 x 1.5 4/M8 x 25 50.5 0.8

32 32 85 43.8 25 11 35 x 1.5 4/M8 x 25 50.5 1.0
32 32 85 43.8 38 11 35 x 1.5 4/M8 x 25 50.5 1.2
32 32 85 43.8 51 11 35 x 1.5 4/M8 x 25 50.5 1.5

40 38 85 43.8 12 11 41 x 1.5 4/M8 x 25 50.5 0.7

40 38 85 43.8 25 11 41 x 1.5 4/M8 x 25 50.5 1.0
40 38 85 43.8 38 11 41 x 1.5 4/M8 x 25 50.5 1.2
40 38 85 43.8 51 11 41 x 1.5 4/M8 x 25 50.5 1.6

50 50 100 55 15 11 53 x 1.5 4/M8 x 25 64 1.0

50 50 100 55 25 11 53 x 1.5 4/M8 x 25 64 1.3
50 50 100 55 38 11 53 x 1.5 4/M8 x 25 64 1.6
50 50 100 55 51 11 53 x 1.5 4/M8 x 25 64 1.9

65 66 131 77 15 13.5 70 x 2.0 6/M8 x 30 91 1.7

65 66 131 77 25 13.5 70 x 2.0 6/M8 x 30 91 2.1
65 66 131 77 38 13.5 70 x 2.0 6/M8 x 30 91 2.6
65 66 131 77 51 13.5 70 x 2.0 6/M8 x 30 91 3.2

80 81 146 93.5 15 13.5 85 x 2.0 6/M8 x 30 106 1.9

80 81 146 93.5 25 13.5 85 x 2.0 6/M8 x 30 106 2.4
80 81 146 93.5 38 13.5 85 x 2.0 6/M8 x 30 106 3.0
80 81 146 93.5 51 13.5 85 x 2.0 6/M8 x 30 106 3.6

100 100 170 105 15 14 104 x 2.0 8/M8 x 30 119 2.7

100 100 170 105 25 14 104 x 2.0 8/M8 x 30 119 3.2
100 100 170 105 38 14 104 x 2.0 8/M8 x 30 119 4.0
100 100 170 105 51 14 104 x 2.0 8/M8 x 30 119 4.9

24 Edition 3.0
 AWH-Connect and Accessories

AWH-Connect with metric Thread Bolts EN 13445 (PED 2014/68/EU) DIN

Complete 1.4435/1.4404 (316L) Split ring 1.4404 (316L) Fastening kit
DN DIN Price/EUR Article No. Price/EUR Article No. Price/EUR Article No.
10 111,00 161 0 D010 12 142 21 43,00 161 2 G034 11 022 21 15,00 161 3 M408 25 800 31
10 120,00 161 0 D010 25 142 21 43,00 161 2 G034 11 022 21 15,00 161 3 M408 25 800 31
10 125,00 161 0 D010 38 142 21 43,00 161 2 G034 11 022 21 15,00 161 3 M408 25 800 31
10 133,00 161 0 D010 51 142 21 43,00 161 2 G034 11 022 21 15,00 161 3 M408 25 800 31

15 111,00 161 0 D015 12 142 21 42,00 161 2 G034 11 022 21 15,00 161 3 M408 25 800 31
15 120,00 161 0 D015 25 142 21 42,00 161 2 G034 11 022 21 15,00 161 3 M408 25 800 31
15 125,00 161 0 D015 38 142 21 42,00 161 2 G034 11 022 21 15,00 161 3 M408 25 800 31
15 133,00 161 0 D015 51 142 21 42,00 161 2 G034 11 022 21 15,00 161 3 M408 25 800 31

20 111,00 161 0 D020 12 142 21 42,00 161 2 G034 11 022 21 15,00 161 3 M408 25 800 31
20 120,00 161 0 D020 25 142 21 42,00 161 2 G034 11 022 21 15,00 161 3 M408 25 800 31
20 125,00 161 0 D020 38 142 21 42,00 161 2 G034 11 022 21 15,00 161 3 M408 25 800 31
20 133,00 161 0 D020 51 142 21 42,00 161 2 G034 11 022 21 15,00 161 3 M408 25 800 31

25 134,00 161 0 D025 12 142 21 52,00 161 2 G050 11 022 21 15,00 161 3 M408 25 800 31
25 143,00 161 0 D025 25 142 21 52,00 161 2 G050 11 022 21 15,00 161 3 M408 25 800 31
25 159,00 161 0 D025 38 142 21 52,00 161 2 G050 11 022 21 15,00 161 3 M408 25 800 31
25 178,00 161 0 D025 51 142 21 52,00 161 2 G050 11 022 21 15,00 161 3 M408 25 800 31

32 134,00 161 0 D032 12 142 21 52,00 161 2 G050 11 022 21 15,00 161 3 M408 25 800 31
32 143,00 161 0 D032 25 142 21 52,00 161 2 G050 11 022 21 15,00 161 3 M408 25 800 31
32 159,00 161 0 D032 38 142 21 52,00 161 2 G050 11 022 21 15,00 161 3 M408 25 800 31
32 178,00 161 0 D032 51 142 21 52,00 161 2 G050 11 022 21 15,00 161 3 M408 25 800 31

40 134,00 161 0 D040 12 142 21 52,00 161 2 G050 11 022 21 15,00 161 3 M408 25 800 31
40 143,00 161 0 D040 25 142 21 52,00 161 2 G050 11 022 21 15,00 161 3 M408 25 800 31
40 159,00 161 0 D040 38 142 21 52,00 161 2 G050 11 022 21 15,00 161 3 M408 25 800 31
40 178,00 161 0 D040 51 142 21 52,00 161 2 G050 11 022 21 15,00 161 3 M408 25 800 31

50 159,00 161 0 D050 15 142 21 60,00 161 2 G064 11 022 21 15,00 161 3 M408 25 800 31
50 165,00 161 0 D050 25 142 21 60,00 161 2 G064 11 022 21 15,00 161 3 M408 25 800 31
50 185,00 161 0 D050 38 142 21 60,00 161 2 G064 11 022 21 15,00 161 3 M408 25 800 31
50 202,00 161 0 D050 51 142 21 60,00 161 2 G064 11 022 21 15,00 161 3 M408 25 800 31

65 219,00 161 0 D065 15 142 21 107,00 161 2 G091 13 022 21 25,00 161 3 M608 30 800 31
65 223,00 161 0 D065 25 142 21 107,00 161 2 G091 13 022 21 25,00 161 3 M608 30 800 31
65 244,00 161 0 D065 38 142 21 107,00 161 2 G091 13 022 21 25,00 161 3 M608 30 800 31
65 260,00 161 0 D065 51 142 21 107,00 161 2 G091 13 022 21 25,00 161 3 M608 30 800 31

80 282,00 161 0 D080 15 142 21 121,00 161 2 G106 13 022 21 25,00 161 3 M608 30 800 31
80 305,00 161 0 D080 25 142 21 121,00 161 2 G106 13 022 21 25,00 161 3 M608 30 800 31
80 350,00 161 0 D080 38 142 21 121,00 161 2 G106 13 022 21 25,00 161 3 M608 30 800 31
80 389,00 161 0 D080 51 142 21 121,00 161 2 G106 13 022 21 25,00 161 3 M608 30 800 31

100 389,00 161 0 D100 15 142 21 189,00 161 2 G119 14 022 21 33,00 161 3 M808 30 800 31
100 444,00 161 0 D100 25 142 21 189,00 161 2 G119 14 022 21 33,00 161 3 M808 30 800 31
100 482,00 161 0 D100 38 142 21 189,00 161 2 G119 14 022 21 33,00 161 3 M808 30 800 31
100 496,00 161 0 D100 51 142 21 189,00 161 2 G119 14 022 21 33,00 161 3 M808 30 800 31

Edition 3.0 25
 AWH-Connect and Accessories

TC
AWH-Connect with metric Thread Bolts EN 13445 (PED 2014/68/EU) ISO
DN ISO D1 D3 D4 L1 L2 Pipe-Ø Thread bolts TC Weight [kg]
D4

13.5 10.3 55 20 12 10 13.5 x 1.6 4/M6 x 25 25 0.4

L2 13.5 10.3 55 20 25 10 13.5 x 1.6 4/M6 x 25 25 0.5
L1 13.5 10.3 55 20 38 10 13.5 x 1.6 4/M6 x 25 25 0.6
13.5 10.3 55 20 51 10 13.5 x 1.6 4/M6 x 25 25 0.8

D1 17.2 14 70 28.8 12 11 17.2 x 1.6 4/M8 x 25 34 0.6

17.2 14 70 28.8 25 11 17.2 x 1.6 4/M8 x 25 34 0.8
D3 17.2 14 70 28.8 38 11 17.2 x 1.6 4/M8 x 25 34 1.0
17.2 14 70 28.8 51 11 17.2 x 1.6 4/M8 x 25 34 1.2
Pipe standard:
DIN 11866 Series B (DIN EN ISO 1127) 21.3 18.1 70 28.8 12 11 21.3 x 1.6 4/M8 x 25 34 0.6
21.3 18.1 70 28.8 25 11 21.3 x 1.6 4/M8 x 25 34 0.8
21.3 18.1 70 28.8 38 11 21.3 x 1.6 4/M8 x 25 34 1.0
21.3 18.1 70 28.8 51 11 21.3 x 1.6 4/M8 x 25 34 1.2

26.9 23.7 85 43.8 12 11 26.9 x 1.6 4/M8 x 25 50.5 0.8

26.9 23.7 85 43.8 25 11 26.9 x 1.6 4/M8 x 25 50.5 1.1
26.9 23.7 85 43.8 38 11 26.9 x 1.6 4/M8 x 25 50.5 1.4
26.9 23.7 85 43.8 51 11 26.9 x 1.6 4/M8 x 25 50.5 1.7

33.7 29.7 85 43.8 12 11 33.7x2.0 4/M8 x 25 50.5 0.8

33.7 29.7 85 43.8 25 11 33.7x2.0 4/M8 x 25 50.5 1.0
33.7 29.7 85 43.8 38 11 33.7x2.0 4/M8 x 25 50.5 1.3
33.7 29.7 85 43.8 51 11 33.7x2.0 4/M8 x 25 50.5 1.6

42.4 38.4 100 55 15 11 42.4 x 2.0 4/M8 x 25 64 1.1

42.4 38.4 100 55 25 11 42.4 x 2.0 4/M8 x 25 64 1.3
42.4 38.4 100 55 38 11 42.4 x 2.0 4/M8 x 25 64 1.7
42.4 38.4 100 55 51 11 42.4 x 2.0 4/M8 x 25 64 2.1

48.3 44.3 100 55 15 11 48.3 x 2.0 4/M8 x 25 64 1.0

48.3 44.3 100 55 25 11 48.3 x 2.0 4/M8 x 25 64 1.3
48.3 44.3 100 55 38 11 48.3 x 2.0 4/M8 x 25 64 1.6
48.3 44.3 100 55 51 11 48.3 x 2.0 4/M8 x 25 64 2.0

60.3 56.3 112 65.5 15 11.5 60.3 x 2.0 4/M8 x 25 77.5 1.2
60.3 56.3 112 65.5 25 11.5 60.3 x 2.0 4/M8 x 25 77.5 1.5
60.3 56.3 112 65.5 38 11.5 60.3 x 2.0 4/M8 x 25 77.5 1.9
60.3 56.3 112 65.5 51 11.5 60.3 x 2.0 4/M8 x 25 77.5 2.4

76.1 72.1 131 77 15 13.5 76.1 x 2.0 6/M8 x 30 91 1.7

76.1 72.1 131 77 25 13.5 76.1 x 2.0 6/M8 x 30 91 2.0
76.1 72.1 131 77 38 13.5 76.1 x 2.0 6/M8 x 30 91 2.5
76.1 72.1 131 77 51 13.5 76.1 x 2.0 6/M8 x 30 91 3.1

88.9 84.3 146 93.5 15 13.5 88.9 x 2.3 6/M8 x 30 106 1.9
88.9 84.3 146 93.5 25 13.5 88.9 x 2.3 6/M8 x 30 106 2.3
88.9 84.3 146 93.5 38 13.5 88.9 x 2.3 6/M8 x 30 106 2.9
88.9 84.3 146 93.5 51 13.5 88.9 x 2.3 6/M8 x 30 106 3.6

114.3 109.7 170 115 15 14 114.3 x 2.3 8/M8 x 30 130 2.3

114.3 109.7 170 115 25 14 114.3 x 2.3 8/M8 x 30 130 2.8
114.3 109.7 170 115 38 14 114.3 x 2.3 8/M8 x 30 130 3.4
114.3 109.7 170 115 51 14 114.3 x 2.3 8/M8 x 30 130 4.2

26 Edition 3.0
 AWH-Connect and Accessories

AWH-Connect with metric Thread Bolts EN 13445 (PED 2014/68/EU) ISO

Complete 1.4435/1.4404 (316L) Split ring 1.4404 (316L) Fastening kit
DN ISO Price/EUR Article No. Price/EUR Article No. Price/EUR Article No.
13.5 105,00 161 0 I013 12 142 21 43,00 161 2 G025 10 022 21 16,00 161 3 M406 20 800 31
13.5 109,00 161 0 I013 25 142 21 43,00 161 2 G025 10 022 21 16,00 161 3 M406 20 800 31
13.5 116,00 161 0 I013 38 142 21 43,00 161 2 G025 10 022 21 16,00 161 3 M406 20 800 31
13.5 121,00 161 0 I013 51 142 21 43,00 161 2 G025 10 022 21 16,00 161 3 M406 20 800 31

17.2 111,00 161 0 I017 12 142 21 42,00 161 2 G034 11 022 21 15,00 161 3 M408 25 800 31
17.2 120,00 161 0 I017 25 142 21 42,00 161 2 G034 11 022 21 15,00 161 3 M408 25 800 31
17.2 125,00 161 0 I017 38 142 21 42,00 161 2 G034 11 022 21 15,00 161 3 M408 25 800 31
17.2 133,00 161 0 I017 51 142 21 42,00 161 2 G034 11 022 21 15,00 161 3 M408 25 800 31

21.3 111,00 161 0 I021 12 142 21 42,00 161 2 G034 11 022 21 15,00 161 3 M408 25 800 31
21.3 120,00 161 0 I021 25 142 21 42,00 161 2 G034 11 022 21 15,00 161 3 M408 25 800 31
21.3 125,00 161 0 I021 38 142 21 42,00 161 2 G034 11 022 21 15,00 161 3 M408 25 800 31
21.3 133,00 161 0 I021 51 142 21 42,00 161 2 G034 11 022 21 15,00 161 3 M408 25 800 31

26.9 134,00 161 0 I026 12 142 21 52,00 161 2 G050 11 022 21 15,00 161 3 M408 25 800 31
26.9 143,00 161 0 I026 25 142 21 52,00 161 2 G050 11 022 21 15,00 161 3 M408 25 800 31
26.9 159,00 161 0 I026 38 142 21 52,00 161 2 G050 11 022 21 15,00 161 3 M408 25 800 31
26.9 178,00 161 0 I026 51 142 21 52,00 161 2 G050 11 022 21 15,00 161 3 M408 25 800 31

33.7 134,00 161 0 I033 12 142 21 52,00 161 2 G050 11 022 21 15,00 161 3 M408 25 800 31
33.7 143,00 161 0 I033 25 142 21 52,00 161 2 G050 11 022 21 15,00 161 3 M408 25 800 31
33.7 159,00 161 0 I033 38 142 21 52,00 161 2 G050 11 022 21 15,00 161 3 M408 25 800 31
33.7 178,00 161 0 I033 51 142 21 52,00 161 2 G050 11 022 21 15,00 161 3 M408 25 800 31

42.4 159,00 161 0 I042 15 142 21 60,00 161 2 G064 11 022 21 15,00 161 3 M408 25 800 31
42.4 165,00 161 0 I042 25 142 21 60,00 161 2 G064 11 022 21 15,00 161 3 M408 25 800 31
42.4 185,00 161 0 I042 38 142 21 60,00 161 2 G064 11 022 21 15,00 161 3 M408 25 800 31
42.4 202,00 161 0 I042 51 142 21 60,00 161 2 G064 11 022 21 15,00 161 3 M408 25 800 31

48.3 159,00 161 0 I048 15 142 21 60,00 161 2 G064 11 022 21 15,00 161 3 M408 25 800 31
48.3 165,00 161 0 I048 25 142 21 60,00 161 2 G064 11 022 21 15,00 161 3 M408 25 800 31
48.3 185,00 161 0 I048 38 142 21 60,00 161 2 G064 11 022 21 15,00 161 3 M408 25 800 31
48.3 202,00 161 0 I048 51 142 21 60,00 161 2 G064 11 022 21 15,00 161 3 M408 25 800 31

60.3 168,00 161 0 I060 15 142 21 67,00 161 2 G077 11 022 21 15,00 161 3 M408 25 800 31
60.3 181,00 161 0 I060 25 142 21 67,00 161 2 G077 11 022 21 15,00 161 3 M408 25 800 31
60.3 199,00 161 0 I060 38 142 21 67,00 161 2 G077 11 022 21 15,00 161 3 M408 25 800 31
60.3 217,00 161 0 I060 51 142 21 67,00 161 2 G077 11 022 21 15,00 161 3 M408 25 800 31

76.1 219,00 161 0 I076 15 142 21 107,00 161 2 G091 13 022 21 25,00 161 3 M608 30 800 31
76.1 223,00 161 0 I076 25 142 21 107,00 161 2 G091 13 022 21 25,00 161 3 M608 30 800 31
76.1 244,00 161 0 I076 38 142 21 107,00 161 2 G091 13 022 21 25,00 161 3 M608 30 800 31
76.1 260,00 161 0 I076 51 142 21 107,00 161 2 G091 13 022 21 25,00 161 3 M608 30 800 31

88.9 282,00 161 0 I088 15 142 21 121,00 161 2 G106 13 022 21 25,00 161 3 M608 30 800 31
88.9 305,00 161 0 I088 25 142 21 121,00 161 2 G106 13 022 21 25,00 161 3 M608 30 800 31
88.9 350,00 161 0 I088 38 142 21 121,00 161 2 G106 13 022 21 25,00 161 3 M608 30 800 31
88.9 389,00 161 0 I088 51 142 21 121,00 161 2 G106 13 022 21 25,00 161 3 M608 30 800 31

114.3 463,00 161 0 I114 15 142 21 275,00 161 2 G130 14 022 21 33,00 161 3 M808 30 800 31
114.3 503,00 161 0 I114 25 142 21 275,00 161 2 G130 14 022 21 33,00 161 3 M808 30 800 31
114.3 554,00 161 0 I114 38 142 21 275,00 161 2 G130 14 022 21 33,00 161 3 M808 30 800 31
114.3 606,00 161 0 I114 51 142 21 275,00 161 2 G130 14 022 21 33,00 161 3 M808 30 800 31

Edition 3.0 27
 AWH-Connect and Accessories

TC
AWH-Connect with metric Thread Bolts EN 13445 (PED2014/68/EU) Inch
DN Inch D1 D3 D4 L1 L2 Pipe-Ø Thread bolts TC Weight [kg]
D4

1/2" 9.4 55 20 12 10 12.7 x 1.65 4/M6 x 25 25 0.4

L2 1/2" 9.4 55 20 25 10 12.7 x 1.65 4/M6 x 25 25 0.5
L1 1/2" 9.4 55 20 38 10 12.7 x 1.65 4/M6 x 25 25 0.6
1/2" 9.4 55 20 51 10 12.7 x 1.65 4/M6 x 25 25 0.8

D1 3/4" 15.8 55 20 12 10 19.05 x 1.65 4/M6 x 25 25 0.4

3/4" 15.8 55 20 25 10 19.05 x 1.65 4/M6 x 25 25 0.5
D3 3/4" 15.8 55 20 38 10 19.05 x 1.65 4/M6 x 25 25 0.6
3/4" 15.8 55 20 51 10 19.05 x 1.65 4/M6 x 25 25 0.7
Pipe standard:
DIN 11866 Series C (ASME-BPE) 1" 22.1 85 43.8 12 11 25.4 x 1.65 4/M8 x 25 50.5 0.8
1" 22.1 85 43.8 25 11 25.4 x 1.65 4/M8 x 25 50.5 1.1
1" 22.1 85 43.8 38 11 25.4 x 1.65 4/M8 x 25 50.5 1.4
1" 22.1 85 43.8 51 11 25.4 x 1.65 4/M8 x 25 50.5 1.7

1 1/2" 34.8 85 43.8 12 11 38.1 x 1.65 4/M8 x 25 50.5 0.8

1 1/2" 34.8 85 43.8 25 11 38.1 x 1.65 4/M8 x 25 50.5 1.0
1 1/2" 34.8 85 43.8 38 11 38.1 x 1.65 4/M8 x 25 50.5 1.3
1 1/2" 34.8 85 43.8 51 11 38.1 x 1.65 4/M8 x 25 50.5 1.5

2" 47.5 100 55 15 11 50.8 x 1.65 4/M8 x 25 64 1.0

2" 47.5 100 55 25 11 50.8 x 1.65 4/M8 x 25 64 1.3
2" 47.5 100 55 38 11 50.8 x 1.65 4/M8 x 25 64 1.6
2" 47.5 100 55 51 11 50.8 x 1.65 4/M8 x 25 64 2.0

2 1/2" 60.2 112 65.5 15 11.5 63.5 x 1.65 4/M8 x 25 77.5 1.2
2 1/2" 60.2 112 65.5 25 11.5 63.5 x 1.65 4/M8 x 25 77.5 1.5
2 1/2" 60.2 112 65.5 38 11.5 63.5 x 1.65 4/M8 x 25 77.5 1.9
2 1/2" 60.2 112 65.5 51 11.5 63.5 x 1.65 4/M8 x 25 77.5 2.3

3" 72.9 131 77 15 13.5 76.2 x 1.65 6/M8 x 30 91 1.6

3" 72.9 131 77 25 13.5 76.2 x 1.65 6/M8 x 30 91 2.0
3" 72.9 131 77 38 13.5 76.2 x 1.65 6/M8 x 30 91 2.5
3" 72.9 131 77 51 13.5 76.2 x 1.65 6/M8 x 30 91 3.0

4" 97.4 170 105 15 14 101.6 x 2.11 8/M8 x 30 119 2.5

4" 97.4 170 105 25 14 101.6 x 2.11 8/M8 x 30 119 3.2
4" 97.4 170 105 38 14 101.6 x 2.11 8/M8 x 30 119 3.9
4" 97.4 170 105 51 14 101.6 x 2.11 8/M8 x 30 119 4.8

28 Edition 3.0
 AWH-Connect and Accessories

AWH-Connect with metric Thread Bolts EN 13445 (PED2014/68/EU) Inch

Complete 1.4435/1.4404 (316L) Split ring 1.4404 (316L) Fastening kit
DN Inch Price/EUR Article No. Price/EUR Article No. Price/EUR Article No.
1/2" 105,00 161 0 A050 12 142 21 43,00 161 2 G025 10 022 21 16,00 161 3 M406 20 800 31
1/2" 109,00 161 0 A050 25 142 21 43,00 161 2 G025 10 022 21 16,00 161 3 M406 20 800 31
1/2" 116,00 161 0 A050 38 142 21 43,00 161 2 G025 10 022 21 16,00 161 3 M406 20 800 31
1/2" 121,00 161 0 A050 51 142 21 43,00 161 2 G025 10 022 21 16,00 161 3 M406 20 800 31

3/4" 105,00 161 0 A075 12 142 21 43,00 161 2 G025 10 022 21 16,00 161 3 M406 20 800 31
3/4" 109,00 161 0 A075 25 142 21 43,00 161 2 G025 10 022 21 16,00 161 3 M406 20 800 31
3/4" 116,00 161 0 A075 38 142 21 43,00 161 2 G025 10 022 21 16,00 161 3 M406 20 800 31
3/4" 121,00 161 0 A075 51 142 21 43,00 161 2 G025 10 022 21 16,00 161 3 M406 20 800 31

1" 134,00 161 0 A100 12 142 21 52,00 161 2 G050 11 022 21 15,00 161 3 M408 25 800 31
1" 143,00 161 0 A100 25 142 21 52,00 161 2 G050 11 022 21 15,00 161 3 M408 25 800 31
1" 159,00 161 0 A100 38 142 21 52,00 161 2 G050 11 022 21 15,00 161 3 M408 25 800 31
1" 178,00 161 0 A100 51 142 21 52,00 161 2 G050 11 022 21 15,00 161 3 M408 25 800 31

1 1/2" 134,00 161 0 A150 12 142 21 52,00 161 2 G050 11 022 21 15,00 161 3 M408 25 800 31
1 1/2" 143,00 161 0 A150 25 142 21 52,00 161 2 G050 11 022 21 15,00 161 3 M408 25 800 31
1 1/2" 159,00 161 0 A150 38 142 21 52,00 161 2 G050 11 022 21 15,00 161 3 M408 25 800 31
1 1/2" 178,00 161 0 A150 51 142 21 52,00 161 2 G050 11 022 21 15,00 161 3 M408 25 800 31

2" 159,00 161 0 A200 15 142 21 60,00 161 2 G064 11 022 21 15,00 161 3 M408 25 800 31
2" 165,00 161 0 A200 25 142 21 60,00 161 2 G064 11 022 21 15,00 161 3 M408 25 800 31
2" 185,00 161 0 A200 38 142 21 60,00 161 2 G064 11 022 21 15,00 161 3 M408 25 800 31
2" 202,00 161 0 A200 51 142 21 60,00 161 2 G064 11 022 21 15,00 161 3 M408 25 800 31

2 1/2" 168,00 161 0 A250 15 142 21 67,00 161 2 G077 11 022 21 15,00 161 3 M408 25 800 31
2 1/2" 181,00 161 0 A250 25 142 21 67,00 161 2 G077 11 022 21 15,00 161 3 M408 25 800 31
2 1/2" 199,00 161 0 A250 38 142 21 67,00 161 2 G077 11 022 21 15,00 161 3 M408 25 800 31
2 1/2" 217,00 161 0 A250 51 142 21 67,00 161 2 G077 11 022 21 15,00 161 3 M408 25 800 31

3" 219,00 161 0 A300 15 142 21 107,00 161 2 G091 13 022 21 25,00 161 3 M608 30 800 31
3" 223,00 161 0 A300 25 142 21 107,00 161 2 G091 13 022 21 25,00 161 3 M608 30 800 31
3" 244,00 161 0 A300 38 142 21 107,00 161 2 G091 13 022 21 25,00 161 3 M608 30 800 31
3" 260,00 161 0 A300 51 142 21 107,00 161 2 G091 13 022 21 25,00 161 3 M608 30 800 31

4" 389,00 161 0 A400 15 142 21 189,00 161 2 G119 13 022 21 33,00 161 3 M808 30 800 31
4" 444,00 161 0 A400 25 142 21 189,00 161 2 G119 13 022 21 33,00 161 3 M808 30 800 31
4" 482,00 161 0 A400 38 142 21 189,00 161 2 G119 13 022 21 33,00 161 3 M808 30 800 31
4" 496,00 161 0 A400 51 142 21 189,00 161 2 G119 13 022 21 33,00 161 3 M808 30 800 31

Edition 3.0 29
 AWH-Connect and Accessories

TC
AWH-Connect with metric Thread Bolts EN 13445 (PED 2014/68/EU) SMS
DN SMS D1 D3 D4 L1 L2 Pipe-Ø Thread bolts TC Weight [kg]
D4

12 10 55 20 12 10 12 x 1 4/M6 x 25 25 0.4
L2 12 10 55 20 25 10 12 x 1 4/M6 x 25 25 0.5
L1 12 10 55 20 38 10 12 x 1 4/M6 x 25 25 0.6
12 10 55 20 51 10 12 x 1 4/M6 x 25 25 0.8

D1 18 15 55 20 12 10 18 X 1 4/M6 x 25 25 0.4
18 15 55 20 25 10 18 X 1 4/M6 x 25 25 0.5
D3 18 15 55 20 38 10 18 X 1 4/M6 x 25 25 0.6
18 15 55 20 51 10 18 X 1 4/M6 x 25 25 0.8
Pipe standard:
SMS 3008 25 22.6 85 43.8 12 11 25 x 1.2 4/M8 x 25 50.5 0.8
25 22.6 85 43.8 25 11 25 x 1.2 4/M8 x 25 50.5 1.1
25 22.6 85 43.8 38 11 25 x 1.2 4/M8 x 25 50.5 1.3
25 22.6 85 43.8 51 11 25 x 1.2 4/M8 x 25 50.5 1.7

38 35.6 85 43.8 12 11 38 x 1.2 4/M8 x 25 50.5 0.8

38 35.6 85 43.8 25 11 38 x 1.2 4/M8 x 25 50.5 1.0
38 35.6 85 43.8 38 11 38 x 1.2 4/M8 x 25 50.5 1.3
38 35.6 85 43.8 51 11 38 x 1.2 4/M8 x 25 50.5 1.6

51 48.6 100 55 15 11 51 x 1.2 4/M8 x 25 64 1.0

51 48.6 100 55 25 11 51 x 1.2 4/M8 x 25 64 1.3
51 48.6 100 55 38 11 51 x 1.2 4/M8 x 25 64 1.6
51 48.6 100 55 51 11 51 x 1.2 4/M8 x 25 64 2.0

63 60.3 112 65.5 15 11.5 63.5 x 1.6 4/M8 x 25 77.5 1.2

63 60.3 112 65.5 25 11.5 63.5 x 1.6 4/M8 x 25 77.5 1.5
63 60.3 112 65.5 38 11.5 63.5 x 1.6 4/M8 x 25 77.5 1.9
63 60.3 112 65.5 51 11.5 63.5 x 1.6 4/M8 x 25 77.5 2.3

76 72.9 131 77 15 13.5 76.1 x 1.6 6/M8 x 30 91 1.6

76 72.9 131 77 25 13.5 76.1 x 1.6 6/M8 x 30 91 2.0
76 72.9 131 77 38 13.5 76.1 x 1.6 6/M8 x 30 91 2.5
76 72.9 131 77 51 13.5 76.1 x 1.6 6/M8 x 30 91 3.0

102 97.6 170 105 15 14 101.6 x 2 8/M8 x 30 119 2.7

102 97.6 170 105 25 14 101.6 x 2 8/M8 x 30 119 3.4
102 97.6 170 105 38 14 101.6 x 2 8/M8 x 30 119 4.1
102 97.6 170 105 51 14 101.6 x 2 8/M8 x 30 119 5.0

30 Edition 3.0
 AWH-Connect and Accessories

AWH-Connect with metric Thread Bolts EN 13445 (PED 2014/68/EU) SMS

Complete 1.4435/1.4404 (316L) Split ring 1.4404 (316L) Fastening kit
DN SMS Price/EUR Article No. Price/EUR Article No. Price/EUR Article No.
12 105,00 161 0 S012 12 142 21 43,00 161 2 G025 10 022 21 16,00 161 3 M406 20 800 31
12 109,00 161 0 S012 25 142 21 43,00 161 2 G025 10 022 21 16,00 161 3 M406 20 800 31
12 116,00 161 0 S012 38 142 21 43,00 161 2 G025 10 022 21 16,00 161 3 M406 20 800 31
12 121,00 161 0 S012 51 142 21 43,00 161 2 G025 10 022 21 16,00 161 3 M406 20 800 31

18 105,00 161 0 S018 12 142 21 43,00 161 2 G025 10 022 21 16,00 161 3 M406 20 800 31
18 109,00 161 0 S018 25 142 21 43,00 161 2 G025 10 022 21 16,00 161 3 M406 20 800 31
18 116,00 161 0 S018 38 142 21 43,00 161 2 G025 10 022 21 16,00 161 3 M406 20 800 31
18 121,00 161 0 S018 51 142 21 43,00 161 2 G025 10 022 21 16,00 161 3 M406 20 800 31

25 134,00 161 0 S025 12 142 21 52,00 161 2 G050 11 022 21 15,00 161 3 M408 25 800 31
25 143,00 161 0 S025 25 142 21 52,00 161 2 G050 11 022 21 15,00 161 3 M408 25 800 31
25 159,00 161 0 S025 38 142 21 52,00 161 2 G050 11 022 21 15,00 161 3 M408 25 800 31
25 178,00 161 0 S025 51 142 21 52,00 161 2 G050 11 022 21 15,00 161 3 M408 25 800 31

38 134,00 161 0 S038 12 142 21 52,00 161 2 G050 11 022 21 15,00 161 3 M408 25 800 31
38 143,00 161 0 S038 25 142 21 52,00 161 2 G050 11 022 21 15,00 161 3 M408 25 800 31
38 159,00 161 0 S038 38 142 21 52,00 161 2 G050 11 022 21 15,00 161 3 M408 25 800 31
38 178,00 161 0 S038 51 142 21 52,00 161 2 G050 11 022 21 15,00 161 3 M408 25 800 31

51 159,00 161 0 S051 15 142 21 60,00 161 2 G064 11 022 21 15,00 161 3 M408 25 800 31
51 165,00 161 0 S051 25 142 21 60,00 161 2 G064 11 022 21 15,00 161 3 M408 25 800 31
51 185,00 161 0 S051 38 142 21 60,00 161 2 G064 11 022 21 15,00 161 3 M408 25 800 31
51 202,00 161 0 S051 51 142 21 60,00 161 2 G064 11 022 21 15,00 161 3 M408 25 800 31

63 168,00 161 0 S063 15 142 21 67,00 161 2 G077 11 022 21 15,00 161 3 M408 25 800 31
63 181,00 161 0 S063 25 142 21 67,00 161 2 G077 11 022 21 15,00 161 3 M408 25 800 31
63 199,00 161 0 S063 38 142 21 67,00 161 2 G077 11 022 21 15,00 161 3 M408 25 800 31
63 217,00 161 0 S063 51 142 21 67,00 161 2 G077 11 022 21 15,00 161 3 M408 25 800 31

76 219,00 161 0 S076 15 142 21 107,00 161 2 G091 13 022 21 25,00 161 3 M608 30 800 31
76 223,00 161 0 S076 25 142 21 107,00 161 2 G091 13 022 21 25,00 161 3 M608 30 800 31
76 244,00 161 0 S076 38 142 21 107,00 161 2 G091 13 022 21 25,00 161 3 M608 30 800 31
76 260,00 161 0 S076 51 142 21 107,00 161 2 G091 13 022 21 25,00 161 3 M608 30 800 31

102 389,00 161 0 S102 15 142 21 189,00 161 2 G119 14 022 21 33,00 161 3 M808 30 800 31
102 444,00 161 0 S102 25 142 21 189,00 161 2 G119 14 022 21 33,00 161 3 M808 30 800 31
102 482,00 161 0 S102 38 142 21 189,00 161 2 G119 14 022 21 33,00 161 3 M808 30 800 31
102 496,00 161 0 S102 51 142 21 189,00 161 2 G119 14 022 21 33,00 161 3 M808 30 800 31

Edition 3.0 31
 AWH-Connect and Accessories

TC
AWH-Connect with metric Thread Bolts ASME VIII Inch
DN Inch D1 D3 D4 L1 L2 Pipe-Ø Thread bolts TC Weight [kg]
D4

1/2" 9.4 55 20 12 10 12.7 x 1.65 4/M6 x 25 25 0.4

L2 1/2" 9.4 55 20 25 10 12.7 x 1.65 4/M6 x 25 25 0.5
L1 1/2" 9.4 55 20 38 10 12.7 x 1.65 4/M6 x 25 25 0.6
1/2" 9.4 55 20 51 10 12.7 x 1.65 4/M6 x 25 25 0.8

D1 3/4" 15.8 55 20 12 10 19.05 x 1.65 4/M6 x 25 25 0.4

3/4" 15.8 55 20 25 10 19.05 x 1.65 4/M6 x 25 25 0.5
D3 3/4" 15.8 55 20 38 10 19.05 x 1.65 4/M6 x 25 25 0.6
3/4" 15.8 55 20 51 10 19.05 x 1.65 4/M6 x 25 25 0.7
Pipe standard:
DIN 11866 Series C (ASME-BPE) 1" 22.1 85 43.8 12 11 25.4 x 1.65 4/M8 x 25 50.5 0.8
1" 22.1 85 43.8 25 11 25.4 x 1.65 4/M8 x 25 50.5 1.1
1" 22.1 85 43.8 38 11 25.4 x 1.65 4/M8 x 25 50.5 1.4
1" 22.1 85 43.8 51 11 25.4 x 1.65 4/M8 x 25 50.5 1.7

1 1/2" 34.8 85 43.8 12 11 38.1 x 1.65 4/M8 x 25 50.5 0.8

1 1/2" 34.8 85 43.8 25 11 38.1 x 1.65 4/M8 x 25 50.5 1.0
1 1/2" 34.8 85 43.8 38 11 38.1 x 1.65 4/M8 x 25 50.5 1.3
1 1/2" 34.8 85 43.8 51 11 38.1 x 1.65 4/M8 x 25 50.5 1.5

2" 47.5 100 55 15 11 50.8 x 1.65 4/M8 x 25 64 1.0

2" 47.5 100 55 25 11 50.8 x 1.65 4/M8 x 25 64 1.3
2" 47.5 100 55 38 11 50.8 x 1.65 4/M8 x 25 64 1.6
2" 47.5 100 55 51 11 50.8 x 1.65 4/M8 x 25 64 2.0

2 1/2" 60.2 112 65.5 15 11.5 63.5 x 1.65 4/M8 x 25 77.5 1.2
2 1/2" 60.2 112 65.5 25 11.5 63.5 x 1.65 4/M8 x 25 77.5 1.5
2 1/2" 60.2 112 65.5 38 11.5 63.5 x 1.65 4/M8 x 25 77.5 1.9
2 1/2" 60.2 112 65.5 51 11.5 63.5 x 1.65 4/M8 x 25 77.5 2.3

3" 72.9 131 77 15 13.5 76.2 x 1.65 6/M8 x 30 91 1.6

3" 72.9 131 77 25 13.5 76.2 x 1.65 6/M8 x 30 91 2.0
3" 72.9 131 77 38 13.5 76.2 x 1.65 6/M8 x 30 91 2.5
3" 72.9 131 77 51 13.5 76.2 x 1.65 6/M8 x 30 91 3.0

4" 97.4 170 105 15 14 101.6 x 2.11 8/M8 x 30 119 2.5

4" 97.4 170 105 25 14 101.6 x 2.11 8/M8 x 30 119 3.2
4" 97.4 170 105 38 14 101.6 x 2.11 8/M8 x 30 119 3.9
4" 97.4 170 105 51 14 101.6 x 2.11 8/M8 x 30 119 4.8

32 Edition 3.0
 AWH-Connect and Accessories

AWH-Connect with metric Thread Bolts ASME VIII Inch

Complete 1.4404 (316L) Split ring 1.4404 (316L) Fastening kit
DN Inch Price/EUR Article No. Price/EUR Article No. Price/EUR Article No.
1/2" 131,00 161 0 A050 12 142 41 43,00 161 2 G025 10 022 21 50,00 161 3 M406 20 900 41
1/2" 134,00 161 0 A050 25 142 41 43,00 161 2 G025 10 022 21 50,00 161 3 M406 20 900 41
1/2" 142,00 161 0 A050 38 142 41 43,00 161 2 G025 10 022 21 50,00 161 3 M406 20 900 41
1/2" 147,00 161 0 A050 51 142 41 43,00 161 2 G025 10 022 21 50,00 161 3 M406 20 900 41

3/4" 131,00 161 0 A075 12 142 41 43,00 161 2 G025 10 022 21 50,00 161 3 M406 20 900 41
3/4" 134,00 161 0 A075 25 142 41 43,00 161 2 G025 10 022 21 50,00 161 3 M406 20 900 41
3/4" 142,00 161 0 A075 38 142 41 43,00 161 2 G025 10 022 21 50,00 161 3 M406 20 900 41
3/4" 147,00 161 0 A075 51 142 41 43,00 161 2 G025 10 022 21 50,00 161 3 M406 20 900 41

1" 159,00 161 0 A100 12 142 41 52,00 161 2 G050 11 022 21 44,00 161 3 M408 25 900 41
1" 167,00 161 0 A100 25 142 41 52,00 161 2 G050 11 022 21 44,00 161 3 M408 25 900 41
1" 183,00 161 0 A100 38 142 41 52,00 161 2 G050 11 022 21 44,00 161 3 M408 25 900 41
1" 202,00 161 0 A100 51 142 41 52,00 161 2 G050 11 022 21 44,00 161 3 M408 25 900 41

1 1/2" 159,00 161 0 A150 12 142 41 52,00 161 2 G050 11 022 21 44,00 161 3 M408 25 900 41
1 1/2" 167,00 161 0 A150 25 142 41 52,00 161 2 G050 11 022 21 44,00 161 3 M408 25 900 41
1 1/2" 183,00 161 0 A150 38 142 41 52,00 161 2 G050 11 022 21 44,00 161 3 M408 25 900 41
1 1/2" 202,00 161 0 A150 51 142 41 52,00 161 2 G050 11 022 21 44,00 161 3 M408 25 900 41

2" 183,00 161 0 A200 15 142 41 60,00 161 2 G064 11 022 21 44,00 161 3 M408 25 900 41
2" 189,00 161 0 A200 25 142 41 60,00 161 2 G064 11 022 21 44,00 161 3 M408 25 900 41
2" 209,00 161 0 A200 38 142 41 60,00 161 2 G064 11 022 21 44,00 161 3 M408 25 900 41
2" 226,00 161 0 A200 51 142 41 60,00 161 2 G064 11 022 21 44,00 161 3 M408 25 900 41

2 1/2" 193,00 161 0 A250 15 142 41 67,00 161 2 G077 11 022 21 44,00 161 3 M408 25 900 41
2 1/2" 206,00 161 0 A250 25 142 41 67,00 161 2 G077 11 022 21 44,00 161 3 M408 25 900 41
2 1/2" 223,00 161 0 A250 38 142 41 67,00 161 2 G077 11 022 21 44,00 161 3 M408 25 900 41
2 1/2" 242,00 161 0 A250 51 142 41 67,00 161 2 G077 11 022 21 44,00 161 3 M408 25 900 41

3" 259,00 161 0 A300 15 142 41 107,00 161 2 G091 13 022 21 66,00 161 3 M608 30 900 41
3" 263,00 161 0 A300 25 142 41 107,00 161 2 G091 13 022 21 66,00 161 3 M608 30 900 41
3" 284,00 161 0 A300 38 142 41 107,00 161 2 G091 13 022 21 66,00 161 3 M608 30 900 41
3" 299,00 161 0 A300 51 142 41 107,00 161 2 G091 13 022 21 66,00 161 3 M608 30 900 41

4" 450,00 161 0 A400 15 142 41 189,00 161 2 G119 13 022 21 88,00 161 3 M808 30 900 41
4" 506,00 161 0 A400 25 142 41 189,00 161 2 G119 13 022 21 88,00 161 3 M808 30 900 41
4" 543,00 161 0 A400 38 142 41 189,00 161 2 G119 13 022 21 88,00 161 3 M808 30 900 41
4" 558,00 161 0 A400 51 142 41 189,00 161 2 G119 13 022 21 88,00 161 3 M808 30 900 41

Edition 3.0 33
 AWH-Connect and Accessories

Split Ring for AWH-Connect AD2000 Data Sheet (PED 2014/68/EU)

D3 D4 L2 Flange holes TC Weight [kg]

55 20 5 4/7 25 0.08
D3 70 28.8 5 4/9 34 0.13
85 43.8 5 4/9 50.5 0.17
D4
100 55 6 4/9 64 0.28
112 65.5 9.5 4/9 77.5 0.50
L2
125 77 10 6/9 91 0.62
141.5 93.5 10 6/9 106 0.73
160 105 12 8/9 119 1.11
160 116 12 8/9 130 1.03

Split Ring for AWH-Connect EN 13445 (PED 2014/68/EU) / ASME VIII

D3 D4 L2 Flange holes TC Weight [kg]

55 20 10 4/7 25 0.16
D3 70 28.8 11 4/7 34 0.27
85 43.8 11 4/9 50.5 0.36
D4
100 55 11 4/9 64 0.49
112 65.5 11.5 4/9 77.5 0.61
L2
125 77 13.5 6/9 91 0.83
141.5 93.5 13.5 6/9 106 0.97
160 105 14 8/9 119 1.29
164 116 14 8/9 130 1.19

Fastening Kit for AWH-Connect

Bolts Nuts Weight [kg]

4/M6 x 16 4/M6 0.03

4/M6 x 25 4/M6 0.04
4/M8 x 20 4/M8 0.07
4/M8 x 25 4/M8 0.07
6/M8 x 25 6/M8 0.11
4/M8 x 30 4/M8 0.09
6/M8 x 30 6/M8 0.14
8/M8 x 30 8/M8 0.18

AWH-Connect Sight Glass for Clamp Connection DIN 32676

DN DIN DN Inch D1 D2 D3 D4 L1 Weight [kg]
D3
D2 25 - 40 1" / 1 1/2" 43.5 38 50.5 25 10 0.13
D4 50 2" 56.5 52 64 30 10 0.14
2 1/2" 70.5 63.5 77.5 35 10 0.28
65 3" 83.5 76 91 40 10 0.38
L1

80 97 90 106 50 10 0.50
D1 100 4" 110 101 119 55 12 0.80

34 Edition 3.0
 AWH-Connect and Accessories

Split Ring for AWH-Connect AD2000 Data Sheet (PED 2014/68/EU)

1.4404 (316L)
D3 Price/EUR Article No.
55 33,00 161 2 G025 05 022 11
70 32,00 161 2 G034 05 022 11
85 35,00 161 2 G050 05 022 11
100 44,00 161 2 G064 06 022 11
112 57,00 161 2 G077 09 022 11
125 101,00 161 2 G091 10 022 11
141.5 120,00 161 2 G106 10 022 11
160 181,00 161 2 G119 12 022 11
160 182,00 161 2 G130 12 022 11

Split Ring for AWH-Connect EN 13445 (PED 2014/68/EU) / ASME VIII

1.4404 (316L)
D3 Price/EUR Article No.
55 43,00 161 2 G025 10 022 21
70 42,00 161 2 G034 11 022 21
85 52,00 161 2 G050 11 022 21
100 60,00 161 2 G064 11 022 21
112 67,00 161 2 G077 11 022 21
125 107,00 161 2 G091 13 022 21
141.5 121,00 161 2 G106 13 022 21
160 189,00 161 2 G119 14 022 21
164 275,00 161 2 G130 14 022 21

Fastening Kit for AWH-Connect

A4-70/A4-50 SA193 B8M / SA194 8M
Nuts Price/EUR Article No. Price/EUR Article No.
4/M6 16,00 161 3 M406 16 800 31
4/M6 16,00 161 3 M406 25 800 31 50,00 161 3 M406 25 900 41
4/M8 14,00 161 3 M408 20 800 31
4/M8 15,00 161 3 M408 25 800 31 44,00 161 3 M408 25 900 41
6/M8 23,00 161 3 M608 25 800 31
4/M8 17,00 161 3 M408 30 800 31
6/M8 25,00 161 3 M608 30 800 31 66,00 161 3 M608 30 900 41
8/M8 33,00 161 3 M808 30 800 31 88,00 161 3 M808 30 900 41

AWH-Connect Sight Glass for Clamp Connection DIN 32676

1.4462 / borosilicate
DN DIN DN Inch Price/EUR Article No.
25 - 40 1" / 1 1/2" 163,40 161 S 0508 01 061 11
50 2" 174,10 161 S 0648 01 061 11
2 1/2" 200,90 161 S 0778 01 061 11
65 3" 232,90 161 S 0918 01 061 11
80 267,80 161 S 1068 01 061 11
100 4" 332,10 161 S 1198 01 061 11

Edition 3.0 35
 AWH-Connect and Accessories

Sight Glass Flange for AWH-Connect

DN DIN DN Inch D1 D2 D3 D4 D5 L1 L2 Weight [kg]
D3
D2
25 - 40 1" / 1 1/2" 43.5 70 85 30 50.5 13 7 0.32
D4
50 2" 56.5 83 100 35 64 14 8 0.50
2 1/2" 70.5 97 112 40 77.5 17 8 0.87

L1
65 3" 83.5 110 131 45 91 18 8 1.31
Ø9
D1
L2 80 97 125 140 60 106 18 8 1.47
D5 100 4" 110 142 170 65 119 18 7.5 1.95

36 Edition 3.0
 AWH-Connect and Accessories

Sight Glass Flange for AWH-Connect

1,4462 / borosilicate
DN DIN DN Inch Price/EUR Article No.
25 - 40 1" / 1 1/2" 449,90 161 S 0509 91 061 11
50 2" 495,50 161 S 0649 91 061 11
2 1/2" 581,20 161 S 0779 91 061 11
65 3" 674,90 161 S 0919 91 061 11
80 731,10 161 S 1069 91 061 11
100 4" 816,80 161 S 1199 91 061 11

Edition 3.0 37
 AWH-Lids Technical Information

Pressure Equipment Directive (DGRL) in Relation to the Tank Lids

The introduction of the new pressure equipment directive 2014/68/EU has been created as a basis for free trade within the European Union. The
introduction of this standardized directive for manufacturing pressure devices and parts creates the necessary conditions for fair and clear competition
between the EU member states.

Technical scope
The pressure equipment directive states that only complete piping or tanks can be tested. This means that, according to the pressure equipment direc-
tive, individual components (e.g. individual pipes, screw connections, T-pieces, bends and similar parts) cannot carry the CE label.

Guideline 1/22 supports this statement. This guideline contains notes for applying the directive to components for pressure vessels. The components
must be designed and manufactured according to the requirements of the pressure equipment directive. Since these parts do not correspond to the
definition for pressure equipment Article 1 Paragraph (2) No. 2.1, they are not given a CE label. The manufacturer of the pressure equipment is respon-
sible for this and must ensure that the components used enable the pressure equipment to fulfill the key safety requirements specified in the directive.

Use with a pressure dome lid

AWH and Boyer, our partners in the tank lids range, are authorized to manufacture pressure equipment according to the pressure equipment directive.
The necessary valid welding authorizations, a QA department, the TÜV marking transfer certificate, as well as a "notified body" certificate for manufac-
turing pressure equipment are present.

The tank lids assembly group is a component for pressure equipment and, according to guideline 1.22 (see above), falls outside the direct testing
requirements defined in the pressure equipment directive. When welded on to the tank, however, the lid is subject to the test requirements in accor-
dance with the pressure equipment directive.

In deviation from the pressure equipment directive, AWH can provide a component test for the pressure dome lid on request. This enables you to incor-
porate the pressure dome lid easily in your pressure equipment directive overall test.

The scope of supply for the type-tested pressure dome lid includes
- EC declaration of conformity
- Test report for the component test
- Operating instructions
- Material certificate list with drawing

Use with storage tank lid

Due to Article 1, Point 3.21, storage tanks fall outside the scope of the pressure equipment directive. Storage tanks are vessels where the gas pres-
sure over the fluid must not exceed 0.5 bar. When choosing the lid, it is important to consider the prevalent operating pressure, which must not exceed
the maximum permissible pressure for the lid.

Seal Ring for AWH-Lids

The chemical resistance of the seals is heavily influenced by the temperature of the liquid, the duration of contact and, in the case of chemical solu-
tions, the concentration of the active product. The following strength values are for orientation purposes only and are fundamentally influenced by the
following factors: Composition of the rubber mixture, changes in temperature or degree of expansion, weathering influences, duration of stress etc.

Technical Parameters
Sealing material Color* F.D.A. Max. temperature

Section 21
EPDM Grey -40 to +130 °C / -40 to 266 °F
CFR 177.2600
Section 21
FKM Black -10 to +200 °C / 14 to 392 °F
CFR 177.2600
Section 21
Natural rubber White -40 to +70 °C / -40 to 158 °F
CFR 177.2600
Section 21
NBR Bronze -20 to +110 °C / -4 to 230 °F
CFR 177.2600
Section 21
Silicon Yellow-white translucent -50 to +200 °C / -58 to 392 °F
CFR 177.2600

* with reservations

38 Edition 3.0
 P11 - Manlid with conical Frame

The lid type P11 is mainly installed in storage tanks. It provides access for maintenance and repair. The
tapered frame shape means that the lid can be adapted easily to the tank. The curve of the tank is com-
pensated for by the frame height.

The typical installation location is on the side in the bottom area to enable inspections to be carried out
safely and easily. The static water column supports the sealing. The lid is CIP-enabled.

Technical Parameters

Materials: 1.4404 (316L)

Max. static pressure: 2.4 bar / 34.8 psi at 150 °C / 302 °F
Seal rings: EPDM, NBR, Silicone, natural rubber, FKM, other materials on request
Surfaces: Lid electropolished, frame blasted
Internal dimensions: 340 x 440 mm

- Oval stainless steel manlid

- Opening inwards
- Positioned in the upper or lower region of the tank
- Bead seal ring pulled over the edge of the lid

H
S

Ordering Information

Manlid with conical Frame, without Seal Ring

L1 Type AxB H L L1 V Weight [kg] 1.4404 (316L)
A
S

Price/EUR Article No.

P11-340-440 ED 450 x 550 80 440 340 4 12 * 6B0111100000
AxB

3
L

H A
A-A

Seal Ring for Manlid with conical Frame

Type NBR Silicone EPDM FKM Natural rubber
Article No. Article No. Article No. Article No. Article No.
P11-340-440 ED 6B0540100020 6B0540100029 6B0540100011 6B0540100652 6B0540100008

Edition 3.0 39
 P11 - Manlid with flat Frame

The lid type P11 is mainly installed in storage tanks with plane surfaces. It provides access for mainte-
nance and repair. The flat frame shape prevents a dome from forming. The flat frame height also enables
efficient cleaning.

The typical installation location is at the side or on the top. The static water column supports the sealing.
The lid is CIP-enabled.

Technical Parameters

Materials: 1.4404 (316L)

Max. static pressure: 2.4 bar / 34.8 psi at 150 °C / 302 °F
Seal rings: EPDM, NBR, Silicone, FKM, natural rubber, other materials on request
Surfaces: Lid electropolished, frame blasted
Internal dimensions: 340 x 440 mm

- Oval stainless steel manlid

- Opening inwards
- Positioned in the upper or lower region of the tank
- Bead seal ring pulled over the edge of the lid

H
S

Ordering Information

Manlid with flat Frame, without Seal Ring

Type AxB H L L1 V Weight [kg] 1.4404 (316L)
L1
Price/EUR Article No.
A
P11-340-440 P 400 x 500 12 440 340 30 11 * 6B0111120001
AxB

A
A-A
H

Seal Ring for Manlid with flat Frame

Type NBR Silicone EPDM FKM Natural rubber
Article No. Article No. Article No. Article No. Article No.
P11-340-440 P 6B0540100020 6B0540100029 6B0540100011 6B0540100652 6B0540100008

40 Edition 3.0
 P11 - Manlid with low Frame

The lid type P11 is mainly installed in storage tanks. It provides access for maintenance and repair. The
curve of the tank is compensated for by the frame height. The most common installation location is on
the side in the bottom area to enable inspections to be carried out safely and easily.

The static water column supports the sealing. The advantage of this lid is in the design of the sealing. It
enables particularly efficient cleaning.

Technical Parameters

Materials: 1.4404 (316L)

Max. static pressure: 1.7 bar / 24.7 psi at 150 °C / 302 °F
Seal rings: EPDM, NBR, Silicone, FKM, other materials on request
Surfaces: Lid electropolished, frame brushed

- Oval stainless steel manlid

- Opening inwards
- Positioned in the upper or lower region of the tank
- Square seal in the lid, glued

H
S

Ordering Information

H1
Manlid with low Frame, with Seal Ring
Type / Seal Ring AxB H H1 L V Weight [kg] 1.4404 (316L)
A
Price/EUR Article No.
P11-410-510 / Silicone 410 x 510 60 192 577 10 19 * 6B0111140000/0
P11-410-510 / EPDM 410 x 510 60 192 577 10 19 * 6B0111140000/1
P11-410-510 / FKM 410 x 510 60 192 577 10 19 * 6B0111140000/2
AxB

P11-410-510 / NBR 410 x 510 60 192 577 10 19 * 6B0111140000/3

2,5
S

A
H

Edition 3.0 41
 P22 - Pressure Dome Lid

The P22 pressure dome lid is usually used in pressure tanks. It is mainly used for inspecting the inside of
the tank. The lid can also be used for holding mixers, sight glasses and cleaning equipment. It is usually
installed on top of the tank, but can also be installed on the side.

The permissible pressure depends on the diameter, the number of locking screws and the temperature.
The pressure dome lid opens outwards. The sealing takes place via the preload force of the locking nuts
(the internal pressure does not support the sealing!).

Technical Parameters

Materials: 1.4404 (316L)

Seal rings: EPDM, NBR, FKM, Silicone, natural rubber
Surfaces: polished, matt brushed or blasted
Special accessories: Opening depth and sight glasses on request

- Round stainless steel dome lid

- Opening outwards
- O-ring seal in the lid

H
S

Ordering Information

Pressure Dome Lid without Seal Ring

Number of Max. permissible Weight
H A Type D H H1 V clamping devices pressure [bar] 1.4404 (316L)
[kg]
max. 150 °C Vacuum Price/EUR Article No.
S

P22-238 204 60 155 8 3 7 3.8 0.1 6 * 6B0222380200

P22-239 354 60 155 8 3 4 2.2 0.1 11 * 6B0222390005
P22-433 400 100 241 12 4 5 3 0.1 33 * 6B0224330006
D

P22-444 400 100 241 12 5 6 4.3 0.1 34 * 6B0224440006

P22-449 400 100 241 12 9 12 8.5 0.1 40 * 6B0224490002
A P22-443 457 100 236 12 5 4 3.5 0.1 37 * 6B0224430002
P22-454 457 100 236 12 6 6 4.1 0.1 39 * 6B0224540006
H1 P22-459 457 100 236 12 11 8 7.3 0.1 47 * 6B0224590001
A-A
P22-553 500 100 231 12 6 6 3.5 0.1 43 * 6B0225530002
P22-564 500 100 231 12 7 8 4.5 0.1 44 * 6B0225640002
P22-569 500 100 231 12 13 12 7.5 0.1 54 * 6B0225690000

Seal Ring for Pressure Dome Lid

Type NBR Silicone EPDM FKM Natural rubber
Article No. Article No. Article No. Article No. Article No.
P22-238 6B0540100268 6B0540100174 6B0540100302
P22-239 6B0540100747 6B0540100175 6B0540100323
P22-433/-444/-449 6B0540100245 6B0540100299 6B0540100177 6B0540100343 6B0540100144
P22-443/-454/-459 6B0540100246 6B0540100300 6B0540100178 6B0540100344 6B0540100145
P22-553/-564/-569 6B0540100248 6B0540100304 6B0540100181 6B0540100350 6B0540100149

42 Edition 3.0
 P23 - External Lid with one Handle

The lid type P23 is designed for pressureless tanks. It is mainly used as an inspection hatch
on the machines (e.g. washing machine). The lid can be used in the splash zone and below the water
level (max. 3 m water column).

The design enables easy operation for opening and closing without tools. The fixed connection between
the handle and lid enables the lid to be placed easily on the frame, which also ensures secure sealing.

Technical Parameters

Materials: 1.4404 (316L), [1.4301/1.4307 (304/304L), on request]

Seal rings: EPDM, NBR, FKM, Silicone, other materials on request
Surfaces: Lid electropolished, frame brushed

- Rectangular stainless steel manlid

- Opening outwards
- Positioning in the side wall of the machine
- Half cord seal in the lid, glued

H
S

Ordering Information

H1
External Lid with one Handle, with Seal Ring
A Max. permissible Weight
Type / Seal ring AxB H H1 L V pressure [bar] 1.4404 (316L)
[kg]
max. Vacuum Price/EUR Article No.
P23-308 / Silicone 424 x 314 60 172 557 8 0.3 0.2 10 * 6B0233080008/0
S

P23-308 / EPDM 424 x 314 60 172 557 8 0.3 0.2 10 * 6B0233080008/1

AxB

P23-308 / FKM 424 x 314 60 172 557 8 0.3 0.2 10 * 6B0233080008/2

L

P23-308 / NBR 424 x 314 60 172 557 8 0.3 0.2 10 * 6B0233080008/3

2

A
H
A-A

Edition 3.0 43
 P31 - Non-pressure Dome Lid, hygienic

The lid type P31 is designed for pressureless tanks. It is mainly used as a dome lid on the tank. The fluid
level must be below the tank lid. The design enables easy operation for opening and closing without tools.

The fixed connection between the handle and lid enables the lid to be placed easily on the frame, which
also ensures secure sealing. It is used as access for maintenance and repair or for filling a tank. The lid can
also be used for holding inlet nozzles, sight glasses or other connections. This lid is a low-cost version for
use in a pressureless tank.

Technical Parameters

Materials: 1.4404 (316L)

Seal rings: EPDM, NBR, Silicone, natural rubber, other materials on request
Surfaces: Lid electropolished, frame blasted

- Round stainless steel dome lid pressureless

- Opening outwards
- Positioned at the top
- Double lip seal on the frame

H
S

Ordering Information

Non-pressure Dome Lid, hygienic, without Seal Ring

H
Max. permissible
A Type D H H1 L V pressure [bar]
Weight [kg] 1.4404 (316L)
max. Price/EUR Article No.
P31-200 200 100 195 338 3 0.8 5 * 6B0313120001
S

P31-300 300 100 195 441 3 0.3 8 * 6B0313130001

P31-400 430 100 195 575 3 0.2 11 * 6B0313140009
D
L

3 P31-500 500 100 203 651 3 0.1 13 * 6B0313150002

P31-600 595 100 235 734 3 0.05 15 * 6B0313160000

H1
A-A

Seal Ring for Non-pressure Dome Lid, hygienic

Type NBR Silicone EPDM FKM Natural rubber
Article No. Article No. Article No. Article No. Article No.
P31-200 6B0540100227 6B0540100273 6B0540100157 6B0540100324 6B0540100117
P31-300 6B0540100228 6B0540100274 6B0540100158 6B0540100325 6B0540100118
P31-400 6B0540100229 6B0540100275 6B0540100159 6B0540100326 6B0540100119
P31-500 6B0540100230 6B0540100276 6B0540100160 6B0540100327 6B0540100120
P31-600 6B0540100231 6B0540100277 6B0540100161 6B0540100328 6B0540100121

44 Edition 3.0
 P31 - Non-pressure Dome Lid, hygienic

The lid type P31 is designed for pressureless tanks. It is mainly used as a dome lid on the tank. The fluid
level must be below the tank lid. The design enables easy operation for opening and closing without tools.

The fixed connection between the handle and lid enables the lid to be placed easily on the frame, which
also ensures secure sealing. It is used as access for maintenance and repair or for filling a tank. The lid
can also be used for holding inlet nozzles, sight glasses or other connections.

Technical Parameters

Materials: 1.4404 (316L)

Seal rings: EPDM, other materials on request
Surfaces: Lid electropolished, frame blasted

- Round stainless steel dome lid pressureless

- Opening outwards
- Positioned at the top
- Lip seal on the frame

H
Ordering Information

Non-pressure Dome Lid, hygienic, without Seal Ring

H
Max. permissible
A Type D H H1 L V pressure [bar]
Weight[kg] 1.4404 (316L)
max. Price/EUR Article No.
P31-440 400 90 230 520 2 0.1 8 * 6B0313140002
S

P31-540 499 90 230 619 2 0.1 9 * 6B0315140001

D
L

A
H1
A-A

Seal Ring for Non-pressure Dome Lid, hygienic

Type EPDM
Article No.
P31-440 6B0540100162
P31-540 6B0540100160

Edition 3.0 45
 P31 - Non-pressure Dome Lid, hygienic, with double Handle

The lid type P31 is designed for pressureless tanks. It is mainly used as a dome lid on the tank. The fluid
level must be below the lid. The design enables easy operation for opening and closing
without tools.

The fixed connection between the handle and lid enables the lid to be placed easily on the frame, which
also ensures secure sealing. The double handle enables a more even pressing force to be applied and
access for maintenance and repair or for filling a tank. The lid can also be used for holding inlet nozzles,
sight glasses or other attachments.

Technical Parameters

Materials: 1.4404 (316L)

Seal rings: Silicone, EPDM, other materials on request
Surfaces: Lid electropolished, frame blasted

- Round stainless steel dome lid pressureless

- Opening outwards
- Positioned at the top
- Lip seal on the frame

H
S

Ordering Information

H
Non-pressure Dome Lid, hygienic, with double Handle, without Seal Ring
Max. permissible
Type D H H1 L V pressure [bar]
Weight [kg] 1.4404 (316L)
A
max. Price/EUR Article No.
P31-598 500 100 235 620 3 0.1 15 * 6B0315980002
D
L

H1

Seal Ring for Non-pressure Dome Lid, hygienic, with double Handle
Type Silicone EPDM
Article No. Article No.
P31-598 6B0540100276 6B0540100160

46 Edition 3.0
 P33 - Dome Lid, hygienic

This lid is designed for pressureless tanks. It is mainly used as a dome lid on small tanks or on liquid
tanks. The fluid level must be below the lid. This design enables easy operation for opening and closing
without tools.

The fixed connection between the handle and lid enables the lid to be placed easily on the frame, which
also ensures secure sealing. It is used as an opening for maintenance and repair or for filling a tank.

Technical Parameters

Materials: 1.4404 (316L)

Seal rings: EPDM, other materials on request
Surfaces: Lid electropolished, frame blasted

- Round stainless steel dome lid

- Opening outwards
- Positioned at the top
- O-ring seal in the lid

H
S

Ordering Information

H Dome Lid, hygienic, without Seal Ring

Max. permissible
A Type D H H1 V pressure [bar]
Weight [kg] 1.4404 (316L)
max. Vacuum Price/EUR Article No.
P33-114 204 60 154 8 0.8 0.1 4 * 6B0331140007
D

2
S

A
H1
A-A

Seal Ring for Dome Lid, hygienic

Type EPDM
Article No.
P33-114 6B0540100173

Edition 3.0 47
 P33 - Non-pressure Dome Lid, hygienic

The lid type P33 is designed for pressureless tanks. It is mainly used as a dome lid on the tank. The fluid
level must be below the lid. The design enables easy operation for opening and closing without tools.

The fixed connection between the handle and lid enables the lid to be placed easily on the frame,
which also ensures secure sealing. The handle is mounted on the side and can be rotated. This also
enables the lid to be opened fully even with a low installation height between the tank and ceiling. It
is used as access for maintenance and repair or for filling a tank. The lid can also be used for holding
inlet nozzles, sight glasses or other attachments.

Technical Parameters

Materials: 1.4404 (316L)

Seal rings: EPDM, FKM, NBR, other materials on request
Surfaces: Lid electropolished, frame blasted

- Round stainless steel dome lid

- Opening outwards, lid swings out to the side
- Positioned at the top
- Seal: round cord in the lid, glued

H
S

Ordering Information

H Non-pressure Dome Lid, hygienic, with Seal Ring

A Max. permissible
Type / Seal ring D H H1 V pressure [bar]
Weight [kg] 1.4404 (316L)
Price/EUR Article No.
P33-230 / EPDM 220 80 175 2 0.1 4 * 6B0332300001/1
P33-230 / FKM 220 80 175 2 0.1 4 * 6B0332300001/2
P33-230 / NBR 220 80 175 2 0.1 4 * 6B0332300001/3
D

2 P33-330 / EPDM 296 80 175 2 0.1 5 * 6B0333300001/1

P33-330 / FKM 296 80 175 2 0.1 5 * 6B0333300001/2
P33-330 / NBR 296 80 175 2 0.1 5 * 6B0333300001/3
A P33-430 / EPDM 393 80 175 2 0.05 8 * 6B0334300001/1
H1 P33-430 / FKM 393 80 175 2 0.05 8 * 6B0334300001/2
S

A-A P33-430 / NBR 393 80 175 2 0.05 8 * 6B0334300001/3

P33-530 / EPDM 500 80 175 2 0.05 9 * 6B0335300001/1
P33-530 / FKM 500 80 175 2 0.05 9 * 6B0335300001/2
P33-530 / NBR 500 80 175 2 0.05 9 * 6B0335300001/3
P33-630 / EPDM 600 80 175 2 0.05 11 * 6B0336300004
P33-630 / FKM 600 80 175 2 0.05 11 * 6B0336300001/2
P33-630 / NBR 600 80 175 2 0.05 11 * 6B0336300001/3

48 Edition 3.0
Armaturenwerk Hötensleben GmbH
Schulstr. 5 - 6
39393 Hoetensleben, Germany

Tel.: +49 39405 92-0

Fax: +49 39405 92-111
e-mail: [email protected]
http://www.awh.eu

NEUMO Ehrenberg Group

Armaturenwerk Hötensleben GmbH (Germany)

Gebr. Rieger GmbH & Co. KG (Germany) Damstahl a/s (Norway)

NEUMO GmbH & Co. KG (Germany) Damstahl a/s (Denmark)
Damstahl GmbH & Co. KG (Germany) Damstahl AB (Sweden)
NEUMO UK Ltd. (United Kingdom) Damstahl (Finland)

NEUMO GUS (Russia)

NEUMO Polska Sp. z.o.o. (Poland)
NEUMO GUS Krasnodar (Russia)
Damstahl
Dams AG (Switzerland)
VNE Corporation (USA) Herrli
He AG (Switzerland)
NEUMO-EGMO Spain SL (Spain)
NEUMO VARGUS (China)

NEUMO LLC (Vietnam)

AWH Bucharest (Romania)

AWH Corneuburg (Austria)
AWH Říčany (Czech Republic)
EGMO Ltd. (Israel)
Damstahl (Slovenia)
NEUMO Mühendislik ve (Turkey)
AWH Milan (Italy)
NEUMO Budapest Kft. (Hungary)
AWH Lyon (France)
NEUMO VDM (South Africa)

Armaturenwerk Hötensleben GmbH reserves the right to make alterations without prior notice. With the publication of this catalog all previously AWH_Catalogue_Tank Equipment_10/2022_Rev. 03
issued price documents lose their validity. Reproduction, including extracts, requires written approval. Subject to errors. Prices subject to change.