CHILLER SERVICE CHECKLIST Service for the month of :
Type Equipment : CHILLER
Chiller No. :
Brand / Model :
Asset Location / Serving Area :
Asset Tag No. :
Date Service / Time :
Chiller Check List 1 Reading Remarks
Operating Hours
CHW IN
CHW OUT
Cooling In
Cooling Out
Motor Current (A)
Motor Current (%)
Oil Temperature (C)
Oil Tank Temperature ©
Condenser Press (Mpa)
Evaporator Press (Mpa)
Oil Supply Press (Mpa)
VANE Operating Ratio %
Control Out %
Oil Level
PPM STATUS
Chiller Check List 2 Remarks
YES NO
Noise and Vibration
Signs of leakage
Flow Switch
Pressure Gauge
Thermometer
Oil Filter and Dryer
Seal and Gaskets
Motorised Valve
Butterfly Valve
Control Panel
Cleaniness and Drainage
Job done by (contractor) :- Verified by (PMC) :-
CHILLER PUMP SERVICES CHECKLIST Service for the month of :
Type Equipment : CHILLER PUMP
Brand / Model :
Location / Serving Area :
Asset Tag No. :
Date Service / Time :
PPM STATUS
PPM CHECKLIST Remaks
YES NO
Motor Check for undue temperature rise
check proper function and burning smell
Motor running Amps/Volt R
Y
B
Check packing of the terminal box
Check motor bearing and shaft
Lubricate bearing with grease
Check locking blots for tightness
Bearing Check proper function and damages
Check for abnormal noisy and vibration
Lubricate bearing with grease
Shaft Seal Check proper function and damages
Check for abnormal noisy and vibration
Check for water leakage
Shaft Check proper function and damages
Coupling Check for abnormal noisy and vibration
Others Check damages on pump insulation
Check vibration on pump body
Check pump switchboard and control
Check for water leakage
Check strainer and clean if necessary
Job done by (contractor) :- Verified by (PMC) :-
AHU SERVICE CHECKLIST Service for the month of :
Type Equipment : AHU
Brand / Model :
Location / Serving Area :
Asset Tag No. :
Date Service / Time :
PPM STATUS
PPM CHECKLIST Remaks
YES NO
Clean filter and casing
check coil
check control switches
Check motor and wheel
Clean all base pan and check blockage at drain line, clear if nesessary
Check for water leaking and condensation
Check for undue temperature rise
Check proper function and burning smell
R
Motor Motor running Amp/Volt (Reading) Y
B
Check damper motor and adjust as necessary
Check motor bearing, shaft and lubricate as necessary
Belting Check proper function and burning smell
Check tension of belting and replace if necessary
Pulley Check proper function and damages
Check aligment
Water Valves Check proper function and damages
Adjust if necessary
Filter Check proper function and damages, replaced if necessary
Clean Ahu filter with water
Heater Check proper function and damages - control panel
Cooling Coil Check proper function and damages
Check for blockage and purge air trapped
Clean coil with water, if necessary
Panel Board Check proper function and burning smell
Noise and Vibration
Vacuum and blow clean the entire switchboard
Check tightness of electrical terminal at panel/units
Others Check gauges, thermometer and valves
Check casing cleanliness and clean drain
General cleaning of AHU room
Check all water pipeline for leaks and rectify as necessary
Job done by (contractor) :- Verified by (PMC) :-
FCU SERVICE CHECKLIST Service for the month of :
Type Equipment : FCU
Brand / Model :
Location / Serving Area :
Asset Tag No. :
Date Service / Time :
PPM STATUS
PPM CHECKLIST Remaks
YES NO
1 Clean filter, strainner and casing as necessary
2 Check cooling coil
3 Check control switches
4 Check condition of motor, blower, damper and water valves. All
item need adjust as necessary.
5 Check tension of belt and align pulley as necessary
6 Clean drain pan, clear blockage and check all water pipeline for
leaks and rectify as necessary
7 Check for water leak and condensate
8 Check incomming supply for motor (Amp/Volt)
9 Check and clean Panel Board (Tightness, vacuum and blow)
10 Check the entire room and clean as necessary.
Job done by (contractor) :- Verified by (PMC) :-
VENTILATION FAN SERVICE CHECKLIST Service for the month of :
Type Equipment : VENTILATION FAN
Brand / Model :
Location / Serving Area :
Asset Tag No. :
Date Service / Time :
PPM STATUS
PPM CHECKLIST Remaks
YES NO
Clean filter and casing (rust, damage)
Check control switches
Motor Check proper function
Motor Running Amp (Reading) R
Y
B
Check motor bearing and shaft (lubricate with
grease)
Belting Check proper function
Check tension of belting
Pulley Check proper function
Check aligment
Maintain general exterior cleanliness of fan
Job done by (contractor) :- Verified by (PMC) :-
COOLING TOWER SERVICE CHECKLIST Service for the month of :
Type Equipment : COOLING TOWER
No. Unit:
Brand / Model :
Location / Serving Area :
Asset Tag No. :
Date Service / Time :
PPM STATUS
PPM CHECKLIST Remaks
YES NO
General cleaning of tower
Clean basin strainer
Check all fan bearing, lubricate with grease
Check fan blade for no abdormalities on balde
Check belting proper function
Check ball valve proper function and damages
Check water basin for any water leaking
Check casing, louvers and fan guard
Check for abnormal vibration structure
Check cooling tower switchboard and control
Check locking bolt for tightness
Check top basin condition and clean as necessary
Check butterfly valve condition and adjust as necessary
Check motorized valve condition and adjust as necessary
Check motor fan condition and clean as necessary
Check all the piping in the system and clean as necessary
Check the belting condition and alignment was necessary
Check all the valve condition and adjust as necessary
Motor running Amps (Reading) R
FM-1 Y
B
R
FM-2 Y
B
R
FM-3 Y
B
Job done by (contractor) :- Verified by (PMC) :-
