Scribd
Upload
12 views5 pages

2020 Fall Midterm Exam

This document contains a midterm exam for a basic electrical engineering course. The exam has 5 questions worth a total of 60 marks. Question 1 involves finding the equivalent resistance and current in a circuit. Question 2 involves finding voltages and currents in another circuit. Question 3 calculates the output voltage of a circuit using source transformation. Question 4 uses superposition principle to find a current and voltage. Question 5 involves finding Thevenin's equivalent circuit, Norton equivalent circuit, load resistance for maximum power transfer, and maximum power transfer for another circuit.

Uploaded by

b5qm8q6p7r
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
12 views5 pages

2020 Fall Midterm Exam

This document contains a midterm exam for a basic electrical engineering course. The exam has 5 questions worth a total of 60 marks. Question 1 involves finding the equivalent resistance and current in a circuit. Question 2 involves finding voltages and currents in another circuit. Question 3 calculates the output voltage of a circuit using source transformation. Question 4 uses superposition principle to find a current and voltage. Question 5 involves finding Thevenin's equivalent circuit, Norton equivalent circuit, load resistance for maximum power transfer, and maximum power transfer for another circuit.

Uploaded by

b5qm8q6p7r
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

WED Nov.

,4 EE-251 Basic Electrical Engineering


2020
FALL’2020
5 PM– 6:30 PM
Midterm Exam
Student Name
ID No.
Section
Instructor Name
Max. Marks Q1 (8) Q2 (12) Q3 (14) Q4 (12) Q5 (14) Total (60)
Obtained
Marks
Q1. For the circuit shown in figure1, find (8 m)

i) The equivalent resistance Req seen at the terminals a-b.


ii) The current, I

Fig.1

Page 1 of 5
Q2. For the circuit in figure 2. find (12 m)

i) V1, V2, and V3


ii) I1, I2, and I3

Fig.2

Page 2 of 5
Q3. For the circuit in figure 3 calculate Vo using source transformation. (14 m)

Fig.3

Page 3 of 5
Q4. For the circuit shown in figure 4 , apply the principle of Superposition to find ix and Vx
(12 m)

Fig.4

Page 4 of 5
Q5. For the circuit shown in the figure 5, (14 m)

Fig.6
i. Find the Thevenin’s Equivalent circuit between the terminals a-b. (4 m)

ii. Deduce the Norton Equivalent circuit (4 m)

iii. Find the value of the load resistance RL to be connected between the terminals a-b for
maximum power transfer. (3 m)

iv. Determine the maximum power transfer (3 m)

Page 5 of 5

You might also like