Scribd
Upload
44 views3 pages

12FW64 12-Inch LF Driver Specifications

This document provides specifications for the B&C 12FW64 low frequency driver. It is a 12-inch driver with an aluminum voice coil and frequency response range of 55-3000 Hz. It has a continuous power handling capacity of 500 watts and sensitivity of 98 dB. The document also lists additional technical parameters and mounting/shipping information for the driver.

Uploaded by

vishnu
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
44 views3 pages

12FW64 12-Inch LF Driver Specifications

This document provides specifications for the B&C 12FW64 low frequency driver. It is a 12-inch driver with an aluminum voice coil and frequency response range of 55-3000 Hz. It has a continuous power handling capacity of 500 watts and sensitivity of 98 dB. The document also lists additional technical parameters and mounting/shipping information for the driver.

Uploaded by

vishnu
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

12FW64 8Ω

LF Drivers - 12.0 Inches

500 W continuous program power capacity


64 mm (2.5 in) aluminium voice coil
55 - 3000 Hz response
98 dB sensitivity

B&C Speakers s.p.a.

Via Poggiomoro, 1 - Loc. Vallina, 50012 Bagno a Ripoli (FI) - ITALY - Tel. +39 055 65721 - Fax +39 055 6572312 - mail@bcspeakers.com
12FW64
LF Drivers- 12.0 Inc hes

SPECIFICATIONS DESIGN PARAMETERS 4

Nominal Diameter 320 mm (12.0 in) Surround Shape Double Roll Resonance Frequency 55 Hz

Nominal Impedance 8Ω Cone Shape Exponential Re 5.2 Ω

Minimum Impedance 6.7 Ω Magnet Material Ferrite Qes 0.32

Nominal Power Handling1 250 W Spider Single Qms 3.5

Continuous power handling2 500 W Pole Design T-Pole Qts 0.29

Sensitivity (1W/1m)3 98.0 dB Woofer Cone Treatment Vas 64.0 dm 3 (2.26 ft3)
WP Waterproof Front Side
Frequency Range 55 - 3000 Hz Sd 522.0 cm 2 (80.9 in2)
Recommended Enclosure 40.0 dm 3 (1.4 ft3)
Voice Coil Diameter 64 mm (2.5 in) η₀ 3.6 %
Recommended Tuning 55 Hz
Winding Material Aluminium Xmax ± 5.0 mm

Former Material Glass Fibre Xvar ± 5.0 mm

Winding Depth 14.0 mm (0.55 in) Mms 47.0 g

Magnetic Gap Depth 8.0 mm (0.31 in) Bl 15.5 Txm

Flux Density 1.3 T Le 1.0 mH

EBP 171 Hz

B&C Speakers s.p.a.

Via Poggiomoro, 1 - Loc. Vallina, 50012 Bagno a Ripoli (FI) - ITALY - Tel. +39 055 65721 - Fax +39 055 6572312 - mail@bcspeakers.com
MOUNTING AND SHIPPING INFO SERVICE KIT

Overall Diameter 315 mm (12.4 in) Recone kit RCK12FW648

Bolt Circle Diameter 298 mm (11.7 in)

Baffle Cutout Diameter 283.0 mm (11.1 in)

Depth 136 mm (5.35 in)

Flange and Gasket Thickness 13 mm (0.51 in)

Air Volume Occupied by Driver 3.0 dm 3 (0.1 ft3)

Net Weight 5.65 kg (12.46 lb)

Shipping Units 1

Shipping Weight 6.55 kg (14.44 lb)

Shipping Box
360x360x200 mm (14.17x14.17x7.87 in)

1. 2 hours test made with continuous pink noise signal within the range Fs-10Fs. Power calculated on rated minumum impedance. Loudspeaker in free air.
2. Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
3. Applied RMS Voltage is set to 2.83 V for 8 ohms Nominal Impedance.
4. Thiele-Small parameters are measured after a high level 20 Hz sine wave preconditioning test.

B&C Speakers s.p.a.

Via Poggiomoro, 1 - Loc. Vallina, 50012 Bagno a Ripoli (FI) - ITALY - Tel. +39 055 65721 - Fax +39 055 6572312 - mail@bcspeakers.com

You might also like