IRIS INSTRUMENTS

SYSCAL Jr Switch-48
RESISTIVITY IMAGING
FOR ENVIRONMENTAL
APPLICATIONS

Compact yet powerful

400 V - 100 W - 1.2 A
Automatic ranging
Automatic switching
SYSCAL Jr Switch-48 is a new all-in-one multinode resistivity imaging system.
It features an internal switching board for 48 electrodes and an internal 100 W
power source. The output current is automatically adjusted (automatic ranging) to
optimise the input voltage values and ensure the best measurement quality. The
system is designed to automatically perform pre-defined sets of resistivity
measurements with roll-along capability. Two strings of cable with 24 electrode
take-out each are connected on the back of the resistivity meter. Made of heavy
duty seismic cable, these strings are available with standard 5 or 10 m electrode
spacings. Customized cables may also assembled for special arrays or non-standard
applications.

Compact, easy-to-use and field proof, the SYSCAL Jr Switch-48 measures both
resistivity and chargeability (IP). It is ideal for environmental and civil engineering
applications such as pollution monitoring and mapping, salinity control, depth-to-rock determination and weathered
bedrock mapping. It can also be used for shallow groundwater exploration (depth and thickness of aquifers).

With the SYSCAL Jr Switch-48 resistivity surveys can be performed very efficiently with one operator only.

The well-known reliability and

accuracy of the SYSCAL range of
resistivity meters will also mean
extra value both for the contractor
and the results end-user.

Resistivity interpretation (2D section of true resistivity)

IRIS Instruments
1 avenue Buffon, B.P. 6007, 45060 Orléans Cedex 2, France
Phone: + 33 (0) 2 38 63 81 00 - Fax: + 33 (0) 2 38 63 81 82
E-mail: [email protected] - Web site: www.iris-instruments.com
 SYSCAL Jr Switch-48
RESISTIVITY IMAGING
OUTPUT CURRENT SPECIFICATIONS
• Aim: imaging the underground geological structures through surface • Automatic ranging
electrical measurements (microprocessor controlled)
• Principle: transmitting a current I through two electrodes and • Intensity: up to 1200 mA
measuring a voltage V with two other electrodes • Voltage: up to 400V
• Apparent resistivity: ρ = K*V/I, K depending on the electrode (800V peak to peak)
separation • Power: up to 100 W
• Resistivity pseudo-section: contoured plot of the apparent resistivity • Selectable cycle time of 0.25, 0.5, 1 or 2 s
data, using the electrode distance as a pseudo-depth parameter programmable from 0.25 to 10 s.
• True resistivity section: contoured plot of the resistivity distribution • Current measurement precision:
obtained through the inversion of the measured data (using a non 0,5 % typical.
linear parameter fitting scheme)
• Applications: environmental studies, groundwater investigation, INPUT VOLTAGE SPECIFICATIONS
civil engineering, archaeology...
• Measuring process:
automatic ranging and calibration
FIELD LAY-OUT
• Input impedance : 10 MΩ
• Input voltage protection up to 1000V,
range from –5 V to +5 V.
• Power line rejection
Electrode string #1 Electrode string #2 • Voltage measurement precision:
(24 take out) (24 take out) 0.5 % typical
• Noise reduction: continuous stacking
selectable from 1 to 255 stacks.
• SP compensation
through automatic linear drift correction.
Preset arrays (Wenner, dipole,…) or customized arrays are uploaded
• Resistivity accuracy: 0,5 % typical
through the user-friendly ELECTRE (version 2) PC software.
• Induced polarization (chargeability)
The roll-along capability is implemented.
measured over four predefined windows.
1 #1 24 25 #2 48 #1 • Chargeability accuracy:
1 % of measured value for input voltage
1 24 25 48 higher than 10 mV.

GENERAL SPECIFICATIONS
• Weather proof
ACCURACY • Shock resistant fiber-glass case
• Operating temperature: -20 to +70 °C
• Automatic SP compensation including linear drift • Dimensions: 31 x 23 x 35 cm.
• Digital stacking for noise reduction Weight: 11 kg
• Standard deviation computation • Internal memory for 2700 readings
• Noise may be monitored before injection • Power supply: two internal rechargeable
12V / 7 Ah batteries ; optional external
12V backup car battery for transmitter
DATA INTERPRETATION SOFTWARE power
• Autonomy with internal battery:
• RES2DINV or RESIX-2DI (PC),
several thousands of readings
for pseudo-section inversion to true resistivity (and IP) 2D section.
• Weight of a 24 take-out string on a reel:
22 kg (for 5m spa
• RES3DINV (PC),
for inversion to true resistivity (and IP) 3D data.

IRIS Instruments
1 avenue Buffon, B.P. 6007, 45060 Orléans Cedex 2, France
Phone: + 33 (0) 2 38 63 81 00 - Fax: + 33 (0) 2 38 63 81 82
E-mail: [email protected] - Web site: www.iris-instruments.com