2.
Specification
2-1. GSM General Specification
GS M850
PCS1900
Phas e 1
Fr eq. Band[ MHz] 824~849 1850~1910
Uplink/Downlink 869~894 1930~1990
ARFCN r ange 128~251 512~810
Tx/ Rx sp acing 45MHz 80MHz
Mod. Bit rat e/ 270.833kbps 270.833kbps
Bit Per iod 3.692us 3.692us
T im e S lot 576.9us 576.9us
Period/F rame Period 4.615ms 4.615ms
Modu lation 0 . 3 GM S K 0. 3 GMS K
MS Power 33dBm~5dBm 30dBm~0dBm
4 1
Power Cl ass ( max + 33dBm) ( max + 30dBm)
Sensitivity - 102dBm - 100dBm
T DM A M u x 8 8
Cell Radius 35Km 2Km
2-1
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Specification
2-2. GSM Tx Power Class
TX Power TX Power
GSM850 PCS1900
control level control level
5 33±2 dBm 0 30±3 dBm
6 31±2 dBm 1 28±3 dBm
7 29±2 dBm 2 26±3 dBm
8 27±2 dBm 3 24±3 dBm
9 25±2 dBm 4 22±3 dBm
10 23±2 dBm 5 20±3 dBm
11 21±2 dBm 6 18±3 dBm
12 19±2 dBm 7 16±3 dBm
13 17±2 dBm 8 14±3 dBm
14 15±2 dBm 9 12±4 dBm
15 13±2 dBm 10 10±4 dBm
16 11±3 dBm 11 8±4dBm
17 9±3dBm 12 6±4 dBm
18 7±3 dBm 13 4±4 dBm
19 5±3 dBm 14 2±5 dBm
15 0±5 dBm
2-2
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
3. Product Function
Main Function
• GSM 850/1900
• 1.43" CSTN
• FM RADIO
• SMS, MMS
• 64 Poly Melody
• Noise Cancellation
• JAVA
3-1
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
10. Reference data
Reference Abbreviate
― ADC : Analog to Digital Converter
― AMPS : Advanced Mobile Phone System(analog IS-95)
― BGA : Ball Grid Array
― BPF : Band Pass Filter
― CDMA : Code Division Multiple Access
― DL : Downlink
― FTP : File Transfer Protocol
― GPS : Global Positioning System
― MMS : Multimedia Messaging Service
― PBA : Panel Board Assembly
― PCS : Personal Communication System
― PIM(S) : Personal Information Management (System)
― QPSK : Quadrature Phase Shift Keying
― RF : Radio Frequency
― RSS : Received Signal Strength
― SAW : Surface Acoustic Wave
― SMS : Short Message Service
― TCXO : Temperature Compensated Crystal Oscillator
― TSP : Touch Screen Panel
― UL : Uplink
― USB : Universal Serial Bus
10-1
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
1. Safety Precautions
1-1. Repair Precaution
― Repair in Shield Box, during detailed tuning.
Take specially care of tuning or test, because the specification of cellular phone is sensitive for
surrounding interference(RF noise).
― Be careful to use a kind of magnetic object or tool, because performance of parts is damaged by
the influence of magnetic force.
― Surely use a standard screwdriver when you disassemble this product, otherwise screw will be
worn away.
― Use a thicken twisted wire when you measure level.
A thicken twisted wire has low resistance, therefore error of measurement is few.
― Repair after separate Test Pack and Set because for short danger (for example an overcurrent
and furious flames of parts etc) when you repair board in condition of connecting Test Pack and
tuning on.
― Take specially care of soldering, because Land of PCB is small and weak in heat.
― Surely tune on/off while using AC power plug, because a repair of battery charger is dangerous
when tuning ON/OFF PBA and Connector after disassembling charger.
― Don't use as you pleases after change other material than replacement registered on SEC System.
Otherwise engineer in charge isn't charged with problem that you don't keep this rules.
1-1
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Safety Precautions
1-2. ESD(Electrostatically Sensitive Devices) Precaution
Several semiconductor may be damaged easily by static electricity. Such parts are called by ESD
(Electrostatically Sensitive Devices), for example IC,BGA chip etc. Read Precaution below.
You can prevent from ESD damage by static electricity.
― Remove static electricity remained your body before you touch semiconductor or parts with
semiconductor. There are ways that you touch an earthed place or wear static electricity prevention
string on wrist.
― Use earthed soldering steel when you connect or disconnect ESD.
― Use soldering removing tool to break static electricity. Otherwise ESD will be damaged by static
electricity.
― Don't unpack until you set up ESD on product. Because most of ESD are packed by box and
aluminum plate to have conductive power,they are prevented from static electricity.
― You must maintain electric contact between ESD and place due to be set up until ESD is
connected completely to the proper place or a circuit board.
1-2
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
4. Array course control
4-1. Software Adjustments
Test Jig (GH99-36900A) Test Cable (GH39-01160A)
RF Test Cable (GH39-00985A) Adapter (GH99-38251A)
4-1
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Array course control
4-2. Software Downloading
4-2-1. Pre-requsite for Downloading
• Downloader Program(PNX4900 Downloader v1.0 For Lite)
• GT-E1085L Mobile Phone
• Data Cable
• JIG BOX
• Test Cable
• Serial Cable
• Binary files
4-2-2. S/W Downloader Program
■ Load the binary download program by executing the
" PNX4900 Downloader v1.0 Lite "
1. Select the connected serial port and the rate of speed.
4-2
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Array course control
2. Select the Port, Baud Rate and Mode.
3. Select the START Botton, When Complete DL.Bootloader.
4-3
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Array course control
4. 4. Press the "Start" button and connect the Handset, then press "확인".
5. Check the All Download & Calset , Click the Download Botton,
4-4
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Array course control
6. When downloading is complete, automatically the small window was showed up.
7. Confirm the downloaded version name and etc. :
*#1234#
Full Reset :
*0206*3855#
4-5
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
