Product ID: 20502-0123-03 // Page: 1/2
PRODUCT GROUP
MORGRIP MORSMART MORGRIP CLAMPS
SUBSEA DIVER INSTALLED CONNECTORS & CONNECTORS
PRODUCT DESCRIPTION
MORGRIP MORSMART, our standardized subsea div-
er installed connector enables subsea pipelines to be
terminated in an standard ASME/ANSI Class 600, 900,
1500 & 2500 flange without the need for hyperbaric
welding or hot work.
Designed, manufactured and tested to our high quality
standard, these units deploy a compressed elastomeric
seal system and a collet gripping system to enable suit-
able applica-tion to a wide range of pipeline sizes, wall
thicknesses and pressures.
Through standardizing design and production, we are
able to significantly reduce cost, increase stock and mit-
igate long delivery schedules.
Complete with external pressure test facilities, length
compensation and subsea coating the MORGRIP
MORSMART is a quick, easy to install permanent repair
solution to subsea pipeline repair & tie-in.
CAPACITIES
Pipeline size 4in to 56in
Wall Thickness Varies per Pressure Class and NPS
Corrosion Allowance 0.75mm on minimum wall thickness
Length Compensation 0.5 x Nominal pipe diameter
Material Per API Spec 5L Grades of carbon steel
Temperature -20degC to 120degC
Working Pressure Per ASME/ANSI Classes 600,
900, 1500 & 2500
For applications outside of this scope, see our MORGRIP product range of
application or customer specific mechanical connectors and clamps.
CONNECTOR SUBSEA SOLUTIONS
www.connectorsubsea.com // mail@connectorsubsea.com
Head office: Kokstadflaten 17, 5257 Kokstad, Norway
+47 99 70 11 11 // connector-subsea-solutions
Locations in: Brazil, UK, Croatia & Bosnia
Product ID: 20502-0123-03 // Page: 2/2
MORGRIP MORSMART SUBSEA DIVER INSTALLED CONNECTORS
MORGRIP CLAMPS & CONNECTORS
INTERFACES ADDITIONAL INFORMATION
Activation Single Activation with Bolt Tensioners Design code API 5L
ASME B31.3
Gripping Technology Collet ASME BPVC VIII Div. 2
Seal Material Dual Elastomeric Body Material ASTM A694 Grade F52 or equivalent
Back Seal Pressure Test Yes Gripper Material ASTM A29 Grade 4140
Installation Rigging with buoyancy or Coating Jotamastik 87, which is NORSOK M-501
subsea lifting frames System 7B Compliant
Maintenance Not required post installation
Packing Wooden Shipping Crates
01 // MORGRIP MORSMART 02 // MORGRIP MORSMART Connector during factory acceptance
testing
03 // Cross section showing internal grips and seals 04 // Hydro-static testing arrangement
CONNECTOR SUBSEA SOLUTIONS
www.connectorsubsea.com // mail@connectorsubsea.com
Head office: Kokstadflaten 17, 5257 Kokstad, Norway
+47 99 70 11 11 // connector-subsea-solutions
Locations in: Brazil, UK, Croatia & Bosnia
