This material is derived from SAE 9102 which is copyrighted intellectual property of SAE International.
SAE is not responsible for outcomes resulting from the use of this material.
FORM 1 – PART NUMBER ACCOUNTABILITY
Sheet of
1. Part Number: 2. Part Name: 3. Serial Number: 4. FAIR Identifier:
5. Part Revision Level: 6. Drawing Number: 7. Drawing Revision Level: 8. Additional Changes:
9. Manufacturing Process 10. Organization Name: 11. Supplier Code: 12. Purchase Order Number:
Reference:
13. Detail: 14. Full FAI: Partial FAI:
Baseline Part Number (including revision level):
Assembly: Reason for Full / Partial FAI:
a) If the part number above is a detail part only, go to field 19.
b) If the part number above is an assembly, go to the "INDEX" section below.
INDEX of part numbers or sub-assembly numbers required to make the assembly noted above.
15. Part Number: 16. Part Name: 17. Part Type: 18. FAIR Identifier:
19. Does FAIR Contain a Documented Nonconformance(s)? Yes No
20. FAIR Verified By: 21. Date:
22. FAIR Reviewed/Approved By: 23. Date:
24. Customer Approval: 25. Date:
26. Comments:
9102C
Revision Date: January 2024
