Antennas
UHF and Tetra Antennas
SD314-H Series
SD314-HF1P4SNM(D00) 4 dipole, 8.5 dBd, offset, N-Male, HD, 370-460 MHz
Also referred as: SD314-HF1P4SNM • Covers 370-460 MHz frequency range
• 8.5 dBd gain with offset pattern
• Heavy duty with 200 W power handling
• Can be top or side mounted (Universal mount)
Recommend SMK-125-A3 side mount kit when side mounting antenna.
Available from Sinclair separately.
The SD314-H series is an extremely rugged 4-bay exposed dipole antenna designed
for applications where moderate gain is required. These premium-quality antennas
are well suited to public safety/public security applications.
The design of these antennas provides for coverage between 370 to 512 MHz in 2
sub bands, 370-460 MHz and 406-512 MHz for private mobile networks, public
safety and public security networks.
The standard connector offerend is N male which is terminated on a 1 foot cable.
Clamps are not included but recommended is the set of #5 clamps.
Electrical downtilts available from 2-10 degrees.
www.sinctech.com
Region United States Europe, Middle East and Africa Caribbean and Latin America Canada and rest of the world
Canada: 1 800 263 3275
Telephone USA: 1 800 263 3275 International: +44 (0) 1487 84 28 19 International: +1 905 726 7676
International: +1 905 727 0165
E-mail [email protected] [email protected] [email protected] [email protected]
Product Specification Sheet SD314-HF1P4SNM(D00) Issue: 6 Dated: 14-12-16
EPR 017738 Dated: 24-10-14
Customer Tech Manual 005261 Sinclair’s commitment to product leadership may result in improvement or change to this product
Copyright © Sinclair Technologies Page 1/2
Antennas
UHF and Tetra Antennas
SD314-H Series
Electrical Specifications Notes
Frequency Range MHz 370 to 460 *1 : N-Female available
Connector N-Male *1 *2 : Qty 2
*3 : Values based on 100mph and 0 inches of ice.
Gain (nominal) dBd (dBi) 8.5 (10.6)
*4 : Values based on 100mph and 0 inches of ice.
Input VSWR (max) 1.5:1
Polarization vertical
Impedance Ω 50
Pattern Offset
Horizontal beamwidth (typ) degrees 222
Vertical beamwidth (typ) degrees 16
Average Power Input (max) W 200
Lightning protection DC ground
Electrical tilt (available) 0,2,4,6,8,or 10 degrees
Ordering Information
Clamps must be ordered separately.
Mechanical Specifications
Width in (mm) 12.5 (318)
Depth in (mm) 3.5 (89)
Length/ Height in (mm) 98.43 (2500)
Base pipe diameter in (mm) 2.38 (60)
Base pipe mounting length in (mm) 36 (914)
Radiating element material aluminum
Base pipe material aluminum
Weight lbs (kg) 23 (10.44)
Mounting Hardware (Optional) Clamp005, Clamp015, Clamp130, or Clamp125U *2
Actual shipping weight lbs (kg) 35 (15.89)
Shipping dimensions in (mm) 124x4x20 (3150x102x508)
Mounting configurations Universal Mount
Recommended For Offset Side Mount: SMK-125-A3
Environmental Specifications
Temperature range °F (°C) -40 to +140 (-40 to +60)
Wind Loading Area (Flat Plate Equivalent) ft² (m²) 1.73 (0.16)
www.sinctech.com
Wind Loading Area (1/2" ice) ft² (m²) 4.38 (0.41)
Rated wind velocity (no ice) mph (km/h) 185 (298)
Rated wind velocity (1/2" radial ice) mph (km/h) 150 (242)
Lateral thrust (100 mph No Ice) lbs (N) 69 (306.9) *3
Torsional moment (100 mph No Ice) ft-lbs (Nm) 11 (14.9)
Bending moment (100 mph No Ice) ft-lbs (Nm) 249 (336.2) *4
Tip deflection (100 mph No Ice) degrees 0.6
Region United States Europe, Middle East and Africa Caribbean and Latin America Canada and rest of the world
Canada: 1 800 263 3275
Telephone USA: 1 800 263 3275 International: +44 (0) 1487 84 28 19 International: +1 905 726 7676
International: +1 905 727 0165
E-mail [email protected] [email protected] [email protected] [email protected]
Product Specification Sheet SD314-HF1P4SNM(D00) Issue: 6 Dated: 14-12-16
EPR 017738 Dated: 24-10-14
Customer Tech Manual 005261 Sinclair’s commitment to product leadership may result in improvement or change to this product
Copyright © Sinclair Technologies Page 2/2
