JSA (Job Safety Analysis) Sheet
Ref-
Activity Name:- Structural Fabrication & Erection
Location:- Date :
Sr.No. Sub-Activity Name Type Of Hazard Risk(s) Involved Risk Control measures
Only inducted worker shall be deputed at the work place.
1 Manpower Mobilization Untrained worker Personal injury
Given Tool Box Talk to all workers.
Safety shoes safety helmet safety goggle florecent jacket cotten hand gloves to
Trap hazard person may get injured
be used. Area under working to be properly cordoned off.
Before lifting of material with lifting equipment safety supervisor inspect all tied
Fall hazard Fatal accidents
slings are in proper way,then only material to be lifted.
Lifting of materiel and
2
moving to work location No person stand below the lifted load Precautaions to be taken to prevent load
swing. Tied with guide rope
Predefining all the work location for above work.
While moving the material it will be kept tied at both end with guide rope.
Proper and uniform stacking to be done on leveled surface with packing.
ELCB and proper fuse in main supply board to be there. only approved scaffolds
to be used for working at height ,Trained persons to be deployed at work
competent supervisor to be present at all time during hot work activities.
1) electric shock Use of good insulation of welding supply & erecting cable.
2) fire burns Personal Injury/Fatal Joint free cable to be used
3 Fabrication Inspected welding machine to be used
3) toxic fumes Accident
Hot work permit to be taken from concern project and safety dept.
4) explodification
Proper earthling to job and welding machine.
Proper access & platform shall be provided.
Remove all flammable & combustible materiel from work area.
Fire extinguisher to be kept available near by working area.
Welding shield to be used for welding
Manual Handling Injury All lifting machines tools and tackles should possess valid competent person
certificate
Work area shall be barricaded and warning signs shall be displayed.
Erection of Structural Guide rope to be used for erection
4 Work permit shall be obtained before start of work.
Steel
Erected steel members shall be properly braced and supported for stability.
Power Tools Injury Inspected electrical tools shall be used.
All distribution boards should have ELCB.
Cable shall not interfere traffic and movements.
Night work permit to be taken from concern engg.and safety dept.
Darkness, fall of Ensure proper illumination during dark hours.
Personal injury,
5 Work during dark hours person, fall of Electrical cable should lead min 2 m height. No exposed electrical
damage to property
machinery wire.Earthing.
Route shall be illuminated.
Name & Signature of Site Engineer / Supervisor :___________ Name & Signature of Site In-charge :___________
Name & Signature of Project In-charge :__________ Name & Signature of HSE Officer : ______
