BILL OF QUANTITIES FOR ELECTRICAL WORKS FOR HIGH COURT BUILDING AT NAHARAGUN

NON DSR ITEM

APWD QTY
SOR / EXTE
S.No. DESCRIPTION OF ITEM UNIT TOTA
DSR- COURTAUDI RNA
L
2018 / L

S.H.-II DISTRIBUTION PANELS-

1.0 NSR VENTILATION PANEL-1 (BASEMENT FLOOR )

Design, Manufacturing, Supply, Receiving, Unloading, Shifting, installation, testing
& commissioning of cubicle type totally enclosed free standing type moisture, dust
and vermin proof compartmentlized Floor Distribution Panel made out of 2.0 mm
thick & front cover 1.6 mm thick CRCA sheet complete with following
equipments, including indicating lamps, CT's, internal wiring with suitable size
wires / cable, interconnection, painting complete as per specification & drawing. All
the dual source energy meter shall be with maximum demand and RS 485 port for
BMS Connectivity.
INCOMING
1 No. 160 Amp FP Moulded Case Circuit Breaker
1 No. 0 to 500 Volt digital voltmeter with inbuilt selector switch.
1 No. 150 Amp digital ammeter with inbuilt selector switch and CT's.
1 Set of phase indicating lamps with Single Pole MCB.
1 Set of ON / OFF indicating lamps with Single Pole MCB.
1 Set of Digital KWH Meter with Maximum Demand Recorder facility.

BUS BARS
200 Amp TPN aluminium busbar with coloured heat shrinkable sleeve.

Panel described as above (Incomming / Outgoing MCCB / MCB shall be paid

seperately. However the fabrication cost for Incomming / Outgoing shall be
included in above.) Set 1 0 0 1

INCOMMING / OUTGOING

16.21 Supplying with fitting & fixing panel mounting open execution 415V 50Hz 4P
MCCB with microprocessor Release (Ics=Icu, adjustable over Load and Short
Circuit setting, without enclosure of the following capacity complete with making
necessary connection as approved, specified and directed by the dept.

16.21.1 36KA ( ABB, Schneider MG, legrand, Hager C&S, L&T, Siemens make)
16.21.1.263A Each 2 0 0 2
16.21.1.3100A Each 2 0 0 2

16.6 Supplying with fitting and fixing 4P 10KA 240/415V 50Hz MCB of the following
capacity complete with making necessary connection as approved, spcified and
directed by the dept. ( Schneider MG, legrand, Hager, Crabtree xpro make)

16.6.2 C Series
16.6.2.1 6 to 32A Each 5 0 0 5
16.6.2.3 63A Each 3 0 0 3
16.6.2.2 40A Each 3 0 0 3
 APWD QTY
SOR / EXTE
S.No. DESCRIPTION OF ITEM UNIT TOTA
DSR- COURTAUDI RNA
L
2018 / L
2.0 NSR SMOKE EXT PANEL-1 & 2
Design, Manufacturing, Supply, Receiving, Unloading, Shifting, installation, testing
& commissioning of cubicle type totally enclosed free standing type moisture, dust
and vermin proof, compartmenlized Floor Distribution Panel made out of 2.0 mm
thick & front cover 1.6 mm thick CRCA sheet complete with following
equipments, including indicating lamps, CT's, internal wiring with suitable size
wires / cable, interconnection, painting complete as per specification & drawing. All
the dual source energy meter shall be with maximum demand and RS 485 port for
BMS Connectivity.

INCOMING
1 No. 0 to 500 Volt digital voltmeter with inbuilt selector switch.
1 No. 100 Amp digital ammeter with inbuilt selector switch and CT's.
1 Set of phase indicating lamps with Single Pole MCB.
1 Set of ON / OFF indicating lamps with Single Pole MCB.
1 Set of Digital KWH Meter with Maximum Demand Recorder facility.

BUS BARS
150 Amp TPN aluminium busbar with coloured heat shrinkable sleeve.

Panel described as above (Incomming / Outgoing MCCB / MCB shall be paid

seperately. However the fabrication cost for Incomming / Outgoing shall be
included in above.) Set 2 0 0 2

INCOMMING / OUTGOING

16.21 Supplying with fitting & fixing panel mounting open execution 415V 50Hz 4P
MCCB with microprocessor Release (Ics=Icu, adjustable over Load and Short
Circuit setting, without enclosure of the following capacity complete with making
necessary connection as approved, specified and directed by the dept.

16.21.1 36KA ( ABB, Schneider MG, legrand, Hager C&S, L&T, Siemens make)
16.21.1.3100A Each 2 0 0 2

16.6 Supplying with fitting and fixing 4P 10KA 240/415V 50Hz MCB of the following
capacity complete with making necessary connection as approved, spcified and
directed by the dept. ( Schneider MG, legrand, Hager, Crabtree xpro make)

16.6.2 C Series
16.6.2.1 6 to 32A Each 28 0 0 28
 APWD QTY
SOR / EXTE
S.No. DESCRIPTION OF ITEM UNIT TOTA
DSR- COURTAUDI RNA
L
2018 / L
3.0 NSR LIGHT + POWER PANEL-1
Design, Manufacturing, Supply, Receiving, Unloading, Shifting, installation, testing
& commissioning of cubicle type totally enclosed free standing type moisture, dust
and vermin proof compartmentlized Floor Distribution Panel made out of 2.0 mm
thick & front cover 1.6 mm thick CRCA sheet complete with following
equipments, including indicating lamps, CT's, internal wiring with suitable size
wires / cable, interconnection, painting complete as per specification & drawing. All
the dual source energy meter shall be with maximum demand and RS 485 port for
BMS Connectivity.

INCOMING
1 No. 0 to 500 Volt digital voltmeter with inbuilt selector switch.
1 No. 60 Amp digital ammeter with inbuilt selector switch and CT's.
1 Set of phase indicating lamps with Single Pole MCB.
1 Set of ON / OFF indicating lamps with Single Pole MCB.
1 Set of Digital KWH Meter with Maximum Demand Recorder facility.
4 Set of Digital KWH Meter.

BUS BARS
100 Amp TPN aluminium busbar with coloured heat shrinkable sleeve.

Panel described as above (Incomming / Outgoing MCCB / MCB shall be paid

seperately. However the fabrication cost for Incomming / Outgoing shall be
included in above.) Set 1 0 0 1

INCOMMING / OUTGOING

16.21 Supplying with fitting & fixing panel mounting open execution 415V 50Hz 4P
MCCB with microprocessor Release (Ics=Icu, adjustable over Load and Short
Circuit setting, without enclosure of the following capacity complete with making
necessary connection as approved, specified and directed by the dept.

16.21.1 36KA ( ABB, Schneider MG, legrand, Hager C&S, L&T, Siemens make)
16.21.1.263A Each 1 0 0 1

16.6 Supplying with fitting and fixing 4P 10KA 240/415V 50Hz MCB of the following
capacity complete with making necessary connection as approved, spcified and
directed by the dept. ( Schneider MG, legrand, Hager, Crabtree xpro make)

16.6.2 C Series
16.6.2.1 6 to 32A Each 4 0 0 4
16.6.2.2 40A Each 3 0 0 3
 APWD QTY
SOR / EXTE
S.No. DESCRIPTION OF ITEM UNIT TOTA
DSR- COURTAUDI RNA
L
2018 / L
4.0 NSR LIGHT + POWER PANEL-2
Design, Manufacturing, Supply, Receiving, Unloading, Shifting, installation, testing
& commissioning of cubicle type totally enclosed free standing type moisture, dust
and vermin proof compartmentlized Floor Distribution Panel made out of 2.0 mm
thick & front cover 1.6 mm thick CRCA sheet complete with following
equipments, including, indicating lamps, CT's, internal wiring with suitable size
wires / cable, interconnection, painting complete as per specification & drawing. All
the dual source energy meter shall be with maximum demand and RS 485 port for
BMS Connectivity.

INCOMING
1 No. 0 to 500 Volt digital voltmeter with inbuilt selector switch.
1 No. 150 Amp digital ammeter with inbuilt selector switch and CT's.
1 Set of phase indicating lamps with Single Pole MCB.
1 Set of ON / OFF indicating lamps with Single Pole MCB.
1 Set of Digital KWH Meter with Maximum Demand Recorder facility.
8 Set of Digital KWH Meter.

BUS BARS
200 Amp TPN aluminium busbar with coloured heat shrinkable sleeve.

Panel described as above (Incomming / Outgoing MCCB / MCB shall be paid

seperately. However the fabrication cost for Incomming / Outgoing shall be
included in above.) Set 1 0 0 1

INCOMMING / OUTGOING

16.21 Supplying with fitting & fixing panel mounting open execution 415V 50Hz 4P
MCCB with microprocessor Release (Ics=Icu, adjustable over Load and Short
Circuit setting, without enclosure of the following capacity complete with making
necessary connection as approved, specified and directed by the dept.

16.21.1 36KA ( ABB, Schneider MG, legrand, Hager C&S, L&T, Siemens make)
16.21.1.4160A Each 1 0 0 1

16.6 Supplying with fitting and fixing 4P 10KA 240/415V 50Hz MCB of the following
capacity complete with making necessary connection as approved, spcified and
directed by the dept. ( Schneider MG, legrand, Hager, Crabtree xpro make)

16.6.2 C Series
16.6.2.1 6 to 32A Each 5 0 0 5
16.6.2.2 40A Each 3 0 0 3
16.6.2.3 63A Each 6 0 0 6

5.0 NSR LIGHT + POWER PANEL-3 & 4

Design, Manufacturing, Supply, Receiving, Unloading, Shifting, installation, testing
& commissioning of cubicle type totally enclosed free standing type moisture, dust
and vermin proof compartmentlized Floor Distribution Panel made out of 2.0 mm
thick & front cover 1.6 mm thick CRCA sheet complete with following
equipments, including indicating lamps, CT's, internal wiring with suitable size
wires / cable, interconnection, painting complete as per specification & drawing. All
the dual source energy meter shall be with maximum demand and RS 485 port for
BMS Connectivity.
 APWD QTY
SOR / EXTE
S.No. DESCRIPTION OF ITEM UNIT TOTA
DSR- COURTAUDI RNA
L
2018 / L
INCOMING
1 No. 0 to 500 Volt digital voltmeter with inbuilt selector switch.
1 No. 125 Amp digital ammeter with inbuilt selector switch and CT's.
1 Set of phase indicating lamps with Single Pole MCB.
1 Set of ON / OFF indicating lamps with Single Pole MCB.
1 Set of Digital KWH Meter with Maximum Demand Recorder facility.
7 Set of Digital KWH Meter.

BUS BARS
150 Amp TPN aluminium busbar with coloured heat shrinkable sleeve.

Panel described as above (Incomming / Outgoing MCCB / MCB shall be paid

seperately. However the fabrication cost for Incomming / Outgoing shall be
included in above.) Set 2 0 0 2
INCOMMING / OUTGOING

16.21 Supplying with fitting & fixing panel mounting open execution 415V 50Hz 4P
MCCB with microprocessor Release (Ics=Icu, adjustable over Load and Short
Circuit setting, without enclosure of the following capacity complete with making
necessary connection as approved, specified and directed by the dept.

16.21.1 36KA ( ABB, Schneider MG, legrand, Hager C&S, L&T, Siemens make)
16.21.1.4160A Each 2 0 0 2

16.6 Supplying with fitting and fixing 4P 10KA 240/415V 50Hz MCB of the following
capacity complete with making necessary connection as approved, spcified and
directed by the dept. ( Schneider MG, legrand, Hager, Crabtree xpro make)

16.6.2 C Series
16.6.2.1 6 to 32A Each 10 0 0 10
16.6.2.2 40A Each 6 0 0 6
16.6.2.3 63A Each 12 0 0 12

6.0 NSR LIGHT + POWER PANEL-5 &6

Design, Manufacturing, Supply, Receiving, Unloading, Shifting, installation, testing
& commissioning of cubicle type totally enclosed free standing type moisture, dust
and vermin proof compartmentlized Floor Distribution Panel made out of 2.0 mm
thick & front cover 1.6 mm thick CRCA sheet complete with following
equipments, including indicating lamps, CT's, internal wiring with suitable size
wires / cable, interconnection, painting complete as per specification & drawing. All
the dual source energy meter shall be with maximum demand and RS 485 port for
BMS Connectivity.

INCOMING
1 No. 0 to 500 Volt digital voltmeter with inbuilt selector switch.
1 No. 60 Amp digital ammeter with inbuilt selector switch and CT's.
1 Set of phase indicating lamps with Single Pole MCB.
1 Set of ON / OFF indicating lamps with Single Pole MCB.
1 Set of Digital KWH Meter with Maximum Demand Recorder facility.
4 Set of Digital KWH Meter.

BUS BARS
100 Amp TPN aluminium busbar with coloured heat shrinkable sleeve.
 APWD QTY
SOR / EXTE
S.No. DESCRIPTION OF ITEM UNIT TOTA
DSR- COURTAUDI RNA
L
2018 / L
Panel described as above (Incomming / Outgoing MCCB / MCB shall be paid
seperately. However the fabrication cost for Incomming / Outgoing shall be
included in above.) Set 2 0 0 2
INCOMMING / OUTGOING

16.21 Supplying with fitting & fixing panel mounting open execution 415V 50Hz 4P
MCCB with microprocessor Release (Ics=Icu, adjustable over Load and Short
Circuit setting, without enclosure of the following capacity complete with making
necessary connection as approved, specified and directed by the dept.

16.21.1 36KA ( ABB, Schneider MG, legrand, Hager C&S, L&T, Siemens make)
16.21.1.263A Each 2 0 0 2

16.6 Supplying with fitting and fixing 4P 10KA 240/415V 50Hz MCB of the following
capacity complete with making necessary connection as approved, spcified and
directed by the dept. ( Schneider MG, legrand, Hager, Crabtree xpro make)

16.6.2 C Series
16.6.2.1 6 to 32A Each 8 0 0 8
16.6.2.2 40A Each 0 0 0 0
16.6.2.3 63A Each 6 0 0 6

7.0 NSR LIGHT + POWER PANEL ( AUDITORIUM )

Design, Manufacturing, Supply, Receiving, Unloading, Shifting, installation, testing
& commissioning of cubicle type totally enclosed free standing type moisture, dust
and vermin proof compartmentlized Floor Distribution Panel made out of 2.0 mm
thick & front cover 1.6 mm thick CRCA sheet complete with following
equipments, including indicating lamps, CT's, internal wiring with suitable size
wires / cable, interconnection, painting complete as per specification & drawing. All
the dual source energy meter shall be with maximum demand and RS 485 port for
BMS Connectivity.
INCOMING
1 No. 0 to 500 Volt digital voltmeter with inbuilt selector switch.
1 No. 100 Amp digital ammeter with inbuilt selector switch and CT's.
1 Set of phase indicating lamps with Single Pole MCB.
1 Set of ON / OFF indicating lamps with Single Pole MCB.
1 Set of Digital KWH Meter with Maximum Demand Recorder facility.
6 Set of Digital KWH Meter.

BUS BARS
150 Amp TPN aluminium busbar with coloured heat shrinkable sleeve.

Panel described as above (Incomming / Outgoing MCCB / MCB shall be paid

seperately. However the fabrication cost for Incomming / Outgoing shall be
included in above.) Set 0 1 0 1
INCOMMING / OUTGOING

16.21 Supplying with fitting & fixing panel mounting open execution 415V 50Hz 4P
MCCB with microprocessor Release (Ics=Icu, adjustable over Load and Short
Circuit setting, without enclosure of the following capacity complete with making
necessary connection as approved, specified and directed by the dept.

16.21.1 36KA ( ABB, Schneider MG, legrand, Hager C&S, L&T, Siemens make)
16.21.1.3100A Each 0 1 0 1
 APWD QTY
SOR / EXTE
S.No. DESCRIPTION OF ITEM UNIT TOTA
DSR- COURTAUDI RNA
L
2018 / L

16.6 Supplying with fitting and fixing 4P 10KA 240/415V 50Hz MCB of the following
capacity complete with making necessary connection as approved, spcified and
directed by the dept. ( Schneider MG, legrand, Hager, Crabtree xpro make)

16.6.2 C Series
16.6.2.1 6 to 32A Each 0 6 0 6
16.6.2.2 40A Each 0 6 0 6
16.6.2.3 63A Each 0 4 0 4

8.0 NSR LIFT PANEL

Design, Manufacturing, Supply, Receiving, Unloading, Shifting, installation, testing
& commissioning of cubicle type totally enclosed free standing type moisture, dust
and vermin proof compartmentlized Floor Distribution Panel made out of 2.0 mm
thick & front cover 1.6 mm thick CRCA sheet complete with following
equipments, including indicating lamps, CT's, internal wiring with suitable size
wires / cable, interconnection, painting complete as per specification & drawing. All
the dual source energy meter shall be with maximum demand and RS 485 port for
BMS Connectivity.

INCOMING
1 Nos 250 Amp 4P ATS
1 No. 0 to 500 Volt digital voltmeter with inbuilt selector switch.
1 No. 250 Amp digital ammeter with inbuilt selector switch and CT's.
2 Set of phase indicating lamps with Single Pole MCB.
2 Set of ON / OFF indicating lamps with Single Pole MCB.
1 Set of Digital KWH Meter with Maximum Demand Recorder facility.

BUS BARS
300 Amp TPN aluminium busbar with coloured heat shrinkable sleeve.

Panel described as above (Incomming / Outgoing MCCB / MCB shall be paid

seperately. However the fabrication cost for Incomming / Outgoing shall be
included in above.) Set 1 0 0 1
INCOMMING / OUTGOING
16.21 Supplying with fitting & fixing panel mounting open execution 415V 50Hz 4P
MCCB with microprocessor Release (Ics=Icu, adjustable over Load and Short
Circuit setting, without enclosure of the following capacity complete with making
necessary connection as approved, specified and directed by the dept.

16.21.1 36KA ( ABB, Schneider MG, legrand, Hager C&S, L&T, Siemens make)
16.21.1.263A Each 7 0 0 7
16.21.1.5250A Each 2 0 0 2
16.6 Supplying with fitting and fixing 4P 10KA 240/415V 50Hz MCB of the following
capacity complete with making necessary connection as approved, spcified and
directed by the dept. ( Schneider MG, legrand, Hager, Crabtree xpro make)

16.6.2 C Series
16.6.2.2 40A Each 4 0 0 4
16.6.2.3 63A Each 4 0 0 4
 APWD QTY
SOR / EXTE
S.No. DESCRIPTION OF ITEM UNIT TOTA
DSR- COURTAUDI RNA
L
2018 / L
9.0 NSR LIFT DB-
Design, Manufacturing, Supply, Receiving, Unloading, Shifting, installation, testing
& commissioning of cubicle type totally enclosed free standing type moisture, dust
and vermin proof compartmentlized Floor Distribution Panel made out of 2.0 mm
thick & front cover 1.6 mm thick CRCA sheet complete with following
equipments, indicating lamps, CT's, internal wiring with suitable size wires / cable,
interconnection, painting complete as per specification & drawing. All the dual
source energy meter shall be with maximum demand and RS 485 port for BMS
Connectivity.

INCOMING
1 Set of phase indicating lamps with Single Pole MCB.
1 Set of ON / OFF indicating lamps with Single Pole MCB.

BUS BARS
100 Amp TPN aluminium busbar with coloured heat shrinkable sleeve.

Panel described as above (Incomming / Outgoing MCCB / MCB shall be paid

seperately. However the fabrication cost for Incomming / Outgoing shall be
included in above.) Set 6 0 0 6
INCOMMING / OUTGOING
16.21 Supplying with fitting & fixing panel mounting open execution 415V 50Hz 4P
MCCB with microprocessor Release (Ics=Icu, adjustable over Load and Short
Circuit setting, without enclosure of the following capacity complete with making
necessary connection as approved, specified and directed by the dept.

16.21.1 36KA ( ABB, Schneider MG, legrand, Hager C&S, L&T, Siemens make)
16.21.1.263A Each 6 0 0 6
16.8 Supplying with fitting and fixing 30/100/300mA sensitivity 240/415V 50Hz 4P
RCCB of the following capacity complete with making necessary connection as
approved, spcified and directed by the dept. ( ABB, Schneider MG, legrand,
Hager, Crabtree xpro make)
16.8.2 100/300mA sensitivity FP RCCB
16.8.2.3 63A Each 6 0 0 6

16.3 Supplying with fitting and fixing DP 10KA 240/415V 50Hz MCB of the following
capacity complete with making necessary connection as approved, spcified and
directed by the dept. (ABB, Schneider MG, legrand, Hager, Crabtree xpro make)

16.3.2 C Series
16.3.2.1 6 to 32A Each 12 0 0 12
 APWD QTY
SOR / EXTE
S.No. DESCRIPTION OF ITEM UNIT TOTA
DSR- COURTAUDI RNA
L
2018 / L

10.0 NSR EMERGENCY LIGHT PANEL-2

Design, Manufacturing, Supply, Receiving, Unloading, Shifting, installation, testing
& commissioning of cubicle type totally enclosed free standing type moisture, dust
and vermin proof compartmentlized Floor Distribution Panel made out of 2.0 mm
thick & front cover 1.6 mm thick CRCA sheet complete with following
equipments, including indicating lamps, CT's, internal wiring with suitable size
wires / cable, interconnection, painting complete as per specification & drawing. All
the dual source energy meter shall be with maximum demand and RS 485 port for
BMS Connectivity.

INCOMING
1 Set of phase indicating lamps with Single Pole MCB.
1 Set of ON / OFF indicating lamps with Single Pole MCB.

BUS BARS
100 Amp TPN aluminium busbar with coloured heat shrinkable sleeve.

Panel described as above (Incomming / Outgoing MCCB / MCB shall be paid

seperately. However the fabrication cost for Incomming / Outgoing shall be
included in above.) Set 1 0 0 1
INCOMMING / OUTGOING
16.6 Supplying with fitting and fixing 4P 10KA 240/415V 50Hz MCB of the following
capacity complete with making necessary connection as approved, spcified and
directed by the dept. ( Schneider MG, legrand, Hager, Crabtree xpro make)

16.6.2 C Series
16.6.2.2 40A Each 1 0 0 1

16.3 Supplying with fitting and fixing DP 10KA 240/415V 50Hz MCB of the following
capacity complete with making necessary connection as approved, spcified and
directed by the dept. (ABB, Schneider MG, legrand, Hager, Crabtree xpro make)

16.3.2 C Series
16.3.2.1 6 to 32A Each 9 0 0 9
 APWD QTY
SOR / EXTE
S.No. DESCRIPTION OF ITEM UNIT TOTA
DSR- COURTAUDI RNA
L
2018 / L
11.0 NSR EMERGENCY LIGHT PANEL-1
Design, Manufacturing, Supply, Receiving, Unloading, Shifting, installation, testing
& commissioning of cubicle type totally enclosed free standing type moisture, dust
and vermin proof compartmentlized Floor Distribution Panel made out of 2.0 mm
thick & front cover 1.6 mm thick CRCA sheet complete with following
equipments, including indicating lamps, CT's, internal wiring with suitable size
wires / cable, interconnection, painting complete as per specification & drawing. All
the dual source energy meter shall be with maximum demand and RS 485 port for
BMS Connectivity.

INCOMING
1 No. 0 to 500 Volt digital voltmeter with inbuilt selector switch.
1 No. 60 Amp digital ammeter with inbuilt selector switch and CT's.
1 Set of phase indicating lamps with Single Pole MCB.
1 Set of ON / OFF indicating lamps with Single Pole MCB.
1 Set of Digital KWH Meter with Maximum Demand Recorder facility.

BUS BARS
100 Amp TPN aluminium busbar with coloured heat shrinkable sleeve.

Panel described as above (Incomming / Outgoing MCCB / MCB shall be paid

seperately. However the fabrication cost for Incomming / Outgoing shall be
included in above.) Set 1 0 0 1
INCOMMING / OUTGOING
16.21 Supplying with fitting & fixing panel mounting open execution 415V 50Hz 4P
MCCB with microprocessor Release (Ics=Icu, adjustable over Load and Short
Circuit setting, without enclosure of the following capacity complete with making
necessary connection as approved, specified and directed by the dept.

16.21.1 36KA ( ABB, Schneider MG, legrand, Hager C&S, L&T, Siemens make)
16.21.1.263A Each 1 0 0 1
16.6 Supplying with fitting and fixing 4P 10KA 240/415V 50Hz MCB of the following
capacity complete with making necessary connection as approved, spcified and
directed by the dept. ( Schneider MG, legrand, Hager, Crabtree xpro make)

16.6.2 C Series
16.6.2.2 40A Each 2 0 0 2

16.3 Supplying with fitting and fixing DP 10KA 240/415V 50Hz MCB of the following
capacity complete with making necessary connection as approved, spcified and
directed by the dept. (ABB, Schneider MG, legrand, Hager, Crabtree xpro make)

16.3.2 C Series
16.3.2.1 6 to 32A Each 11 0 0 11
 APWD QTY
SOR / EXTE
S.No. DESCRIPTION OF ITEM UNIT TOTA
DSR- COURTAUDI RNA
L
2018 / L
12.0 NSR MAIN UPS O/G PANEL-
Design, Manufacturing, Supply, Receiving, Unloading, Shifting, installation, testing
& commissioning of cubicle type totally enclosed free standing type moisture, dust
and vermin proof compartmentlized Floor Distribution Panel made out of 2.0 mm
thick & front cover 1.6 mm thick CRCA sheet complete with following
equipments, including indicating lamps, CT's, internal wiring with suitable size
wires / cable, interconnection, painting complete as per specification & drawing. All
the dual source energy meter shall be with maximum demand and RS 485 port for
BMS Connectivity.

INCOMING
3 No. 0 to 500 Volt digital voltmeter with inbuilt selector switch.
3 No. 150 Amp digital ammeter with inbuilt selector switch and CT's.
3 Set of phase indicating lamps with Single Pole MCB.
3 Set of ON / OFF indicating lamps with Single Pole MCB.
3 Set of Digital KWH Meter with Maximum Demand Recorder facility.

BUS BARS
400 Amp FP aluminium busbar with coloured heat shrinkable sleeve.

Panel described as above (Incomming / Outgoing MCCB / MCB shall be paid

seperately. However the fabrication cost for Incomming / Outgoing shall be
included in above.) Set 1 0 0 1
INCOMMING / OUTGOING
16.21 Supplying with fitting & fixing panel mounting open execution 415V 50Hz 4P
MCCB with microprocessor Release (Ics=Icu, adjustable over Load and Short
Circuit setting, without enclosure of the following capacity complete with making
necessary connection as approved, specified and directed by the dept.

16.21.1 36KA ( ABB, Schneider MG, legrand, Hager C&S, L&T, Siemens make)
16.21.1.3100A Each 4 0 0 4
16.21.1.4160A Each 3 0 0 3
16.6 Supplying with fitting and fixing 4P 10KA 240/415V 50Hz MCB of the following
capacity complete with making necessary connection as approved, spcified and
directed by the dept. ( Schneider MG, legrand, Hager, Crabtree xpro make)

16.6.2 C Series
16.6.2.1 6 to 32A Each 3 0 0 3
16.6.2.2 40A Each 4 0 0 4
16.6.2.3 63A Each 0 0 0 0
 APWD QTY
SOR / EXTE
S.No. DESCRIPTION OF ITEM UNIT TOTA
DSR- COURTAUDI RNA
L
2018 / L
16.3 Supplying with fitting and fixing DP 10KA 240/415V 50Hz MCB of the following
capacity complete with making necessary connection as approved, spcified and
directed by the dept. (ABB, Schneider MG, legrand, Hager, Crabtree xpro make)

16.3.2 C Series
16.3.2.2 40A Each 5 0 0 5

13.0 NSR UPS POWER PANEL-1

Design, Manufacturing, Supply, Receiving, Unloading, Shifting, installation, testing
& commissioning of cubicle type totally enclosed free standing type moisture, dust
and vermin proof compartmentlized Floor Distribution Panel made out of 2.0 mm
thick & front cover 1.6 mm thick CRCA sheet complete with following
equipments, indicating lamps, CT's, internal wiring with suitable size wires / cable,
interconnection, painting complete as per specification & drawing. All the dual
source energy meter shall be with maximum demand and RS 485 port for BMS
Connectivity.

INCOMING
1 No. 0 to 500 Volt digital voltmeter with inbuilt selector switch.
1 No. 100 Amp digital ammeter with inbuilt selector switch and CT's.
1 Set of phase indicating lamps with Single Pole MCB.
1 Set of ON / OFF indicating lamps with Single Pole MCB.

BUS BARS
150 Amp TPN aluminium busbar with coloured heat shrinkable sleeve.

Panel described as above (Incomming / Outgoing MCCB / MCB shall be paid

seperately. However the fabrication cost for Incomming / Outgoing shall be
included in above.) Set 1 0 0 1
INCOMMING / OUTGOING
16.21 Supplying with fitting & fixing panel mounting open execution 415V 50Hz 4P
MCCB with microprocessor Release (Ics=Icu, adjustable over Load and Short
Circuit setting, without enclosure of the following capacity complete with making
necessary connection as approved, specified and directed by the dept.

16.21.1 36KA ( ABB, Schneider MG, legrand, Hager C&S, L&T, Siemens make)
16.21.1.3100A Each 1 0 0 1
16.6 Supplying with fitting and fixing 4P 10KA 240/415V 50Hz MCB of the following
capacity complete with making necessary connection as approved, spcified and
directed by the dept. ( Schneider MG, legrand, Hager, Crabtree xpro make)

16.6.2 C Series
16.6.2.1 6 to 32A Each 4 0 0 4
16.6.2.2 40A Each 4 0 0 4

16.3 Supplying with fitting and fixing DP 10KA 240/415V 50Hz MCB of the following
capacity complete with making necessary connection as approved, spcified and
directed by the dept. (ABB, Schneider MG, legrand, Hager, Crabtree xpro make)

16.3.2 C Series
16.3.2.1 6 to 32A Each 2 0 0 2
 APWD QTY
SOR / EXTE
S.No. DESCRIPTION OF ITEM UNIT TOTA
DSR- COURTAUDI RNA
L
2018 / L
14.0 NSR UPS POWER PANEL-2 (AUDI. BLOCK)
Design, Manufacturing, Supply, Receiving, Unloading, Shifting, installation, testing
& commissioning of cubicle type totally enclosed free standing type moisture, dust
and vermin proof compartmentlized Floor Distribution Panel made out of 2.0 mm
thick & front cover 1.6 mm thick CRCA sheet complete with following
equipments, including indicating lamps, CT's, internal wiring with suitable size
wires / cable, interconnection, painting complete as per specification & drawing. All
the dual source energy meter shall be with maximum demand and RS 485 port for
BMS Connectivity.

INCOMING
1 No. 0 to 500 Volt digital voltmeter with inbuilt selector switch.
1 No. 100 Amp digital ammeter with inbuilt selector switch and CT's.
1 Set of phase indicating lamps with Single Pole MCB.
1 Set of ON / OFF indicating lamps with Single Pole MCB.

BUS BARS
150 Amp TPN aluminium busbar with coloured heat shrinkable sleeve.

Panel described as above (Incomming / Outgoing MCCB / MCB shall be paid

seperately. However the fabrication cost for Incomming / Outgoing shall be
included in above.) Set 0 1 0 1
INCOMMING / OUTGOING
16.21 Supplying with fitting & fixing panel mounting open execution 415V 50Hz 4P
MCCB with microprocessor Release (Ics=Icu, adjustable over Load and Short
Circuit setting, without enclosure of the following capacity complete with making
necessary connection as approved, specified and directed by the dept.

16.21.1 36KA ( ABB, Schneider MG, legrand, Hager C&S, L&T, Siemens make)
16.21.1.3100A Each 0 2 0 2

16.3 Supplying with fitting and fixing DP 10KA 240/415V 50Hz MCB of the following
capacity complete with making necessary connection as approved, spcified and
directed by the dept. (ABB, Schneider MG, legrand, Hager, Crabtree xpro make)

16.3.2 C Series
16.3.2.2 40A Each 0 2 0 2
 APWD QTY
SOR / EXTE
S.No. DESCRIPTION OF ITEM UNIT TOTA
DSR- COURTAUDI RNA
L
2018 / L
15.0 NSR MAIN PANEL ( GROUND FLOOR)
Design, Manufacturing, Supply, Receiving, Unloading, Shifting, installation, testing
& commissioning of cubicle type totally enclosed free standing type moisture, dust
and vermin proof compartmentlized Floor Distribution Panel made out of 2.0 mm
thick & front cover 1.6 mm thick CRCA sheet complete with following
equipments, including indicating lamps, CT's, internal wiring with suitable size
wires / cable, interconnection, painting complete as per specification & drawing. All
the dual source energy meter shall be with maximum demand and RS 485 port for
BMS Connectivity.
INCOMING
2 No. 0 to 500 Volt digital voltmeter with inbuilt selector switch.
2 No. 600 Amp digital ammeter with inbuilt selector switch and CT's.
2 Set of phase indicating lamps with Single Pole MCB.
2 Set of ON / OFF indicating lamps with Single Pole MCB.
2 Set of Digital KWH Meter with Maximum Demand Recorder facility.

BUS BARS
800 Amp TPN aluminium busbar with coloured heat shrinkable sleeve.

Panel described as above (Incomming / Outgoing MCCB / MCB shall be paid

seperately. However the fabrication cost for Incomming / Outgoing shall be
included in above.) Set 1 0 0 1

BUSCOUPLER
16.21 Supplying with fitting & fixing panel mounting open execution 415V 50Hz 4P
MCCB with microprocessor Release (Ics=Icu, adjustable over Load and Short
Circuit setting, without enclosure of the following capacity complete with making
necessary connection as approved, specified and directed by the dept.

16.21.1 36KA ( ABB, Schneider MG, legrand, Hager C&S, L&T, Siemens make)
16.21.1.6630A Each 1 0 0 1
INCOMMING / OUTGOING
16.21 Supplying with fitting & fixing panel mounting open execution 415V 50Hz 4P
MCCB with microprocessor Release (Ics=Icu, adjustable over Load and Short
Circuit setting, without enclosure of the following capacity complete with making
necessary connection as approved, specified and directed by the dept.

16.21.1 36KA ( ABB, Schneider MG, legrand, Hager C&S, L&T, Siemens make)
16.21.1.263A Each 5 0 0 5
16.21.1.3100A Each 3 0 0 3
16.21.1.4160A Each 9 0 0 9
16.21.1.5250A Each 2 0 0 2
16.21.1.6630A Each 2 0 0 2