SOLENOID VALVE DIRECTLY OPERATED
Series 190
subbase mounted - AFNOR - CNOMO fitting surface 3/2
Instant fittings or threaded end pieces G1/8 ports / positions
SPECIFICATIONS
FLUID : Air or neutral gas, filtered, lubricated or not
DIFFERENTIAL PRESSURE : 0 to 10 bar
MAX. ALLOWABLE PRESSURE (MAP) : 16 bar
FLUID TEMPERATURE min.-max. : -10°C, +60°C
AMBIENT TEMPERATURE min.-max. : -10°C, +60°C
FLOW (Qv at 6 bar) : see table below
FITTING SURFACE : AFNOR NFE 49066 - CNOMO 06.05.80
RESPONSE TIME : 5 ms
CONSTRUCTION
Body subbase mounted, glass filled polyamide 6/6 (PA + FG)
Exhaust M5 female, with plug
Sealing nitrile (NBR)
Electrical equipment conforms to standard NF C79300
Coil and iron circuit encapsulated, rotatable x 360°
Standard connector ISO 4400, rotatable 90° x 90°
with simplified connections for direct front access (see overleaf)
Manual override : without, screwdriver, impulse, button
Subbases for instant fittings : glass filled polyamide 6/6 (PA + FG)
Threaded subbases : die-cast zinc alloy
ELECTRICAL CHARACTERISTICS
Type Voltages(1) Consumption Insulation Protection Electrical
of coil Inrush Hold class degree connection
Size ~ 24V-48V-115V-230V- 50 Hz 9 VA 4VA (3W) Connector ISO 4400
F IP 65 CM 10 (Pg 11P)
25 = 12V-24V-48V-115V 3W
(1) This solenoid valve is dual-voltage : (24V~, 12V=) (48V~, 24V=) (115V~, 48V=) (230V~, 115V=)
with simplified connection
E
CHOICE OF EQUIPMENT
FUNCTION NC 2 1 = Pressure
De-energized 2 = Outlet
Normally closed at rest 3 1
3 = Exhaust
Flow CODES (~/=)
Orifice at 6 bar Coefficient Allowable differential Manual Solenoid valve Solenoid valve
Ø l/min (ANR) KV pressure ΔP (bar) override with standard with coil
(mm) connector without connector
1 2 2 3 1 2 2 3 min. max.
✕ 19000005 19000013
1,6 70 84 1 1,2 0 10 ● 19000006 19000014
▼ 19000017 19000018
■ 19000008 19000016
Type of manual override : ✕ : without ● : screwdriver ▼ : impulse ■ : button
SUBBASES (see overleaf)
OPTIONS
• Other voltages or 60 Hz frequency on request
• Solenoid head for dusty explosive atmospheres, zone 22 (see P597)
• Low consumption coil (24V =, 1,5W - consult us)
• Conformity to standard "UL" (consult us)
• Connector with cable outlet, 2 m long : 88122612
• Connector with transil protection (see P515-4)
• Solenoid valve with connector and built-in visual indicator and protection
CODES
CODE
Solenoid valve without connector
+ Connector with built-in visual indicator and RC protection
(see above) 24V (~/=) 48V (~/=) 115V (~/=) 230V (~/=)
88122603 88122604 88122605 88122608
UK Office European Office
5 Caulside Drive, Antrim, BT41 2DU Unit 6, Saint Anthony’s Business Park, Ballymount Road, D22 VW95
United Kingdom Ireland
TEL: +44 (0) 289448 1808 TEL: +353 (0) 1 4373653
www.valves-direct.com www.valves-direct.com
Series 190
SUBBASES
Connection Type Composition CODES
1 single subbase 35300069
1 joinable subbase 35300070
Plugged endpiece Instant fitting Endpiece ext. Ø 6 mm
With Set of 2 joinable end
instant fittings subbases, right-hand pressure 35300071
(Polyamide 6/6 intake, ext. Ø 6 mm instant fitting.
Ext., Ø 4 mm instant fitting subbases
subbases) Instant fitting Plug Instant fitting
Set of 2 joinable, end Endpiece ext. Ø 6 mm Endpiece ext. Ø 6 mm
subbases, right-hand and/or
35300072 (1)
left-hand, pressure intake
ext. Ø 6 mm instant fittings. Ext. Ø 4 mm instant fitting subbases
G 1/8 1 laterally-connected
single subbase 35300047
threads
1 laterally-connected 35300048
(Zamac subbases) joinable subbase
(1) Equipment can be used for 2 different pressure intakes.
These subbases can be mounted directly on symetrical EN 50022 rail using 2 or more clips (clips sold in packets of 10, code 33400036)
DIMENSIONS AND WEIGHTS
SINGLE MOUNTABLE SOLENOID VALVE
Weight : 0.180 kg
6
90° x 90° 2
5
1
CONNECTION TO SIZE 30 CONNECTOR
Easier and faster electrical connection.
Connector delivered with 2 sealing rings forcable Ø 8 - 10 mm or cable Ø 6 - 8 mm.
Romovable upper lid for checking the voltage without interupting the operation of the solenoid valve.
1 Port 1
2 Port 2
3 Connectable port 3, Ø M5 depth : 5.5
4 Secured by two screws CM 4 x 33,5
5 Manual override
6 Connector rotatable through 90° CM10 (Pg 11P)
(✻) + 15 mm for connector clearance.
______________________________________________________________________________________________________________________________________________
Pneutrol International Limited [email protected]
UK Office European Office
5 Caulside Drive, Antrim, BT41 2DU Unit 6, Saint Anthony’s Business Park, Ballymount Road, D22 VW95
United Kingdom Ireland
TEL: +44 (0) 289448 1808 TEL: +353 (0) 1 4373653
www.valves-direct.com www.valves-direct.com
Series 190
DIMENSIONS AND WEIGHTS
SOLENOID VALVE MOUNTED ON SINGLE INSTANT FITTING SUBBASE
Subbase : code 35300069
Weight : 0.195 kg
3
6
SOLENOID VALVE MOUNTED ON JOINABLE INSTANT FITTING
Subbase : code 35300070 Bottom view
Subbase with endpieces : code 35300071
E
1
7 9
3
8
4
Left-hand pressure intake or
Number of subbases 2 different pressure intakes by
DIMENSION
2 3 4 5 6 7 8 procuring set of 2 end subbases with
A 88 119 150 181 212 243 274 endpieces code : 35300072
B 72 103 134 165 196 227 258 When mounted on DIN rail,
Weight (kg) SV + S. bases 0,415 0,610 0,805 1,000 1,195 1,390 1,585 it is recommended to use 1 securing clip
on the end subbases as well as on the
ASSEMBLY central subbase.
1 Connectable port 3 Ø M5 depth : 5.5
2 locking U-pieces 2 Instant fitting connection for 4 mm OD tube
2 3 Adaptable clips
O-ring
4 Manual override
2
Joinable subbase 5 Connector rotatable through 90° CM10 (Pg 11P)
(code : 35300070) 6 2 Ø 3.5 securing holes Ø 6.5 counterbores depth : Ø 3.5
1 2
Foolproof device 7 Instant fitting connection for Ø 6 mm OD tube
2 2
1
8 Connector rotatable x 180° CM10 (Pg 11P)
2
9 2 securing holes Ø 4.5
(✻) + 15 mm for connector clearance
Joinable end subbases with
instant fitting endpieces
(code : 35300071)
______________________________________________________________________________________________________________________________________________
Pneutrol International Limited [email protected]
UK Office European Office
5 Caulside Drive, Antrim, BT41 2DU Unit 6, Saint Anthony’s Business Park, Ballymount Road, D22 VW95
United Kingdom Ireland
TEL: +44 (0) 289448 1808 TEL: +353 (0) 1 4373653
www.valves-direct.com www.valves-direct.com
Series 190
DIMENSIONS AND WEIGHTS
SOLENOID VALVE MOUNTED ON SINGLE SUBBASE
Subbase : code 35300047
Weight : 0.245 kg
1
90° x 90° 5
3 6
4
SOLENOID VALVE MOUNTED ON JOINABLE SUBBASE
Subbase : code 35300048 Bottom view
7 6
3
4
Joining unit for putting subbases
SCO/JOUCOMATIC reserves the right to alter the availability, design and specifications without notice.
Number of subbases
DIMENSION together, locked by sunken set screw
2 3 4 5 6 7 8
A 62 93 124 155 186 217 248
B 52 83 114 145 176 207 238
Weight (kg) SV + S. bases 0,490 0,735 0,980 1,225 1,470 1,715 1,960 1 Connectable port 3 Ø M5 depth : 5.5
2 3 G 1/8 ports
Subbase delivered with seals, screws and joining unit for complete assembly
3 Adaptable clips
ASSEMBLY 4 Manual override
Joinable subbases assembled with joining unit locked by sunken set screw 5 Connector rotatable through 90° CM10 (Pg 11P)
6 2 securing holes Ø 4.5
7 Subbases assembly port
(✻) + 15 mm for connector clearance
When mounted on DIN rail, it is recommended to use
1 securing clip on the end subbasses as well as on the
central subbase
______________________________________________________________________________________________________________________________________________
Pneutrol International Limited [email protected]
UK Office European Office
5 Caulside Drive, Antrim, BT41 2DU Unit 6, Saint Anthony’s Business Park, Ballymount Road, D22 VW95
United Kingdom Ireland
TEL: +44 (0) 289448 1808 TEL: +353 (0) 1 4373653
www.valves-direct.com www.valves-direct.com
