Scribd
Upload
43 views2 pages

Subject: Heat Transfer-II 4th Sem. / Chemical Engg. (P&P)

This document contains questions about heat transfer equipment and processes. It includes questions about evaporators, heat exchangers, furnaces and boilers. The document is divided into multiple sections with objective, short and long answer type questions.

Uploaded by

mukulranag4
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
43 views2 pages

Subject: Heat Transfer-II 4th Sem. / Chemical Engg. (P&P)

This document contains questions about heat transfer equipment and processes. It includes questions about evaporators, heat exchangers, furnaces and boilers. The document is divided into multiple sections with objective, short and long answer type questions.

Uploaded by

mukulranag4
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Q.29 How can you increase the fuel economy in the No.

of Printed Pages : 4
furnace? Roll No. .................. 120545/030545
Q.30 Describe the working of open pan evaporator.
4th Sem. / Chemical Engg. (P&P)
Q.31 What is difference between Single Effect
Subject : Heat Transfer-II
Evaporator and Multiple Effect Evaporator?
Q.32 Explain the working of Reverberatory furnace? Time : 3 Hrs. M.M. : 100
SECTION-D SECTION-A
Note:Long answer type questions. Attempt any three Note:Objective type questions. All questions are
questions out of four questions. (3x10=30) compulsory (10x1=10)
Q.33 Describe the construction, working and Q.1 Name a process in which heat transfer is
advantages of shell and tube heat exchanger in accompanied by phase change.
detail with the help of neat diagram.
Q.2 Name the type of condensation in which
Q.34 Discuss the construction and working of condensate forms continuous layer of liquid
Lancashire Boiler in detail with the help of neat over the heat transfer surface.
diagram.
Q.3 Write S.I unit of heat transfer rate.
Q.35 What do you understand by feed arrangement
in the evaporator? Discuss the different type of Q.4 Name the type of condensation occurring when
feed arrangements with the help of neat steam condenses on oily surface.
diagram in detail. Q.5 Name the type of flow in the heat exchanger
Q.36 Explain the following in detail. which gives higher value of LMTD.

a) Long Tube Evaporator Q.6 Write the angle to which fins must be arranged
with respect to direction of working fluid flow for
b) Muffle Furnace higher heat transfer efficiency.
Q.7 Name any one type of heat exchanger.
(80) (4) 120545/030545 (1) 120545/030545
Q.8 Write the major mode of heat transfer during evaporation heat transfer operation.
transfer of heat from the burning fuel to the wall Q.19 Define Furnace.
of the boiler in a pulverized-coal-fired large
boiler. Q.20 What is single effect evaporator?

Q.9 Name any one type of water tube boiler. Q.21 Define Condenser.

Q.10 Name the parameter which account for scaling Q.22 Define the evaporation economy?
in the heat transfer equipment.
SECTION-B SECTION-C
Note: Very short answer type questions. Attempt any Note:Short answer type questions. Attempt any eight
ten questions out of twelve questions. questions out of ten questions. (8x5=40)
(10x2=20)
Q.23 Discuss concept of elevation in boiling point in
Q.11 Define Evaporation. brief.
Q.12 What is heat exchanger? Q.24 Write advantages of using baffles in the heat
Q.13 What is purpose of providing fins in the heat exchangers.
transfer equipment? Q.25 Explain the co-current flow arrangement in a
Q.14 Define Boiling. heat exchanger with the help of a neat diagram.
Also write an expression for calculation of
Q.15 What is major advantages of multiple pass heat LMTD for it.
exchanger?
Q.26 What is difference between evaporator and
Q.16 What is cross flow arrangement for the heat condenser?
exchanger?
Q.27 Describe construction of a double pipe heat
Q.17 Define overall heat transfer coefficient. exchanger with the help of a neat diagram.
Q.18 Name any two types of evaporators which is Q.28 Discuss the forced circulation used in
used in chemical industry for carrying out evaporators.
(2) 120545/030545 (3) 120545/030545

You might also like